More colors, more power, more applications... Solid state laser Diode laser Line laser Multicolor laser Laser diode driver Cooling modules

Size: px
Start display at page:

Download "More colors, more power, more applications... Solid state laser Diode laser Line laser Multicolor laser Laser diode driver Cooling modules"

Transcription

1 PEGASUS Linienlaser Diodenlaser Festkörperlaser PEGASUS LASERSYSTEME GMBH More colors, more power, more applications... Solid state laser Diode laser Line laser Multicolor laser Laser diode driver Cooling modules Short form catalogue 2015 PEGASUS LASERSYSTEME GMBH - info@pegasus-lasersysteme.de -

2 PEGASUS LASERSYSTEME About us Since it s start in 1993 PEGASUS OPTIK GMBH has steadily expanded his sphere of activity. While in the beginning the main emphasis was put on the sales of acousto-optic components another branch of the business had been built up in the course of increasing expansion. This business sphere - lasers and laser optics - is handled by PEGASUS LASERSYSTEME GMBH. Located nearby the town of Osnabrück, ensures the label Made in Germany for all laser products. Today, with more than 15 years of experience in development and manufacturing of laser systems for industry, research and development PEGASUS LASERSYSTEME GMBH becomes a partner for all OEM- and university customer requirements. The laser product line covers diode and solid state lasers from the VIS to the near IR wavelength range. Meanwhile PEGASUS is specialist in high power line laser as solution for high speed triangulation systems. The product range is completed by laser equipment as windows, lenses, prisms, filters, mirrors and other optical components according individual customers specifications. Concept engineering Prototype design Series production Some applications have special requirements or specifications on the laser, which can not be fulfilled by standard systems. With a skilled team of physicists and engineers PEGASUS can also respond to those special requests and provide customized solutions for design and prototype as well as series in small quantity. 100% quality control PEGASUS LASERSYSTEME GMBH - Marie Curie Straße 23 - D Wallenhorst - Tel.: +49(0) Fax: +49(0)

3 PEGASUS laser systems Typical applications High speed machine vision Triangulation systems are the basis of industrial machine vision for 2D- and 3D scanning. High power linelaser from PEGASUS with output powers in the W range at different VIS and IR wavelengths show excellent results in 3D scanning of large volumes, for example truck loads. Spectroscopy Many biophotonic fluorescence dyes have an absorption band in the VIS or NIR spectral range. Due to its different available wavelengths in same mechanical housing, the PEGASUS diodelaser series serve as flexible tool for laser induced fluorescence (LIF), Raman spectroscopy and resonance spectroscopy. The high optical output power also allows the detection of multiphoton processes. Digital printing Exposure with high power 532 nm laser light allows the direct digital patterning of photopolymers in stamping press. Thanks to the excellent beam profile of the PEGASUS THOR laser, the beam can be highly focussed in order to reach a high printing resolution. Ophthalmology The DPSS laser ist a commonly used tool in ophthalmology. Especially in photocoagulation applications, e.g. thermal eye treatment, 532 nm laser with optical power between 500 mw and 3 W are widely used, to illuminate the damaged tissue. Long range alignment During manufacturing process of large alloy plates, the rolled sheets or slabs with lengths > 20 m have to be precisely aligned to each other, in order to continue the production process, e.g. the cutting to correct dimension. This often needs the positioning and alignment over distances > 50 m. The PEGASUS high power line laser serve as ideal tools, because the preferable green or blue line is well visible for the worker, even under extremely bright environment conditions. Laser display / Entertainment Typical professional laser display and entertainmant systems are a combination of laser modules with different colors via difficult beam forming, for example different lens and mirror components. The compact PEGASUS multicolor laser have high quality internal beam shaping optics for each color channel, in order to be directly used for integration in scanner set-up. Beside the very compact housing, the system becomes nearly maintenance-free. Forensic illumination Via fluorescence processes, due to laser light illumination, the sensitivity for detection of latent fingerprints, body fluids, hairs and fibers and other samples could be enhanced at least 10 times, compared to conventional methods. Different color bands in the UV, visible range or IR is utilized for for detection on different surfaces textures or backgrounds. Therefore the PEGASUS multicolor systems with up to six color channels could be used as extremely versatile illumination source to give detailed evidences which are invisible under normal white light. PEGASUS LASERSYSTEME GMBH - Marie Curie Straße 23 - D Wallenhorst - Tel.: +49(0) Fax: +49(0)

4 PEGASUS LASERSYSTEME Product program PEGASUS Linienlaser Diodenlaser Festkörperlaser Laser systems Solid state laser Diode laser Line laser Multicolor laser Electronics driver OEM and Benchtop Cooling modules Air, TEC and water cooler Solid state laser (DPSS) Universal Plug and Play systems up to 4 W at 532 nm. Compact OEM modules for easy integration in customized machines. Diode laser 405 nm (violet), 450 nm (blue), 520 nm (green), 635 nm und 660 nm (red), 810 nm (IR) bis 4 W. Dot- and line laser versions. Line laser Different wavelengths between 405 nm and 810 nm with highest optical power up to 3 W (vis) and 12 W (IR). Line lengths > 100 m. Multicolorlaser Up to 6 different colors between 405 nm and 810 nm with same optical axis. Dot- and line laser versions are available. Applications: Spectroscopy, optical pumping or digital printing. Applications: High speed triangulation, laser display or fluorescence excitation. Applications: High speed triangulation and alignment at extreme bright environments. Applications: Laser display, entertainment, triangulation or biophotonics. PEGASUS LASERSYSTEME GMBH - Marie Curie Straße 23 - D Wallenhorst - Tel.: +49(0) Fax: +49(0)

5 PEGASUS Linienlaser Diodenlaser Festkörperlaser CONTENT SOLID STATE LASER SYSTEMS PLUTO Dot and line laser, 400 mw and 800 mw at 532 nm High speed triangulation, long range alignment, scanning in bright environment... page 7 PLUTO-F Dot and line laser, 2 W and 3 W at 532 nm Flow visualisation, high speed machine vision, spectroscopy... page 8 THOR 532 nm, 4 W, TEM 00 Spectroscopy, TiSa pumping, digital printing... page 9 MICRO 532 nm OEM module, 0.8 W and 1.6 W for easy integration Laser display, fluorescence excitation, optical pumping... page 10 DIODE LASER SYSTEMS MINI Small line laser, high power up to 1 W, different wavelengths (violet, VIS, NIR, IR) Hot steel inspection, SMD surface scanning, meat alignment... page 13 MINI-C Line laser, industrial design with integrated driver Road and rail track inspection, hot metal scanning, outdoor alignment... page 14 MICRO-LD High power LD OEM module Forensic illumination, road and rail track inspection, laser display... page 15 MULTICOLOR LASER SYSTEMS MICRO-LD High power dual color laser Forensic measurement, Fluorescence illumination... page 19 TRIUS Multi color high power line laser, 3 colors simultaneously Machine vision, alignment, surface scanning... page 20 TIGER Multi color high power line laser, 4 colors simultaneously Laser display, entertainment... page 21 SIXTUS Multi color high power line laser, 6 colors simultaneously Fluorescence excitation, spectroscopy, biophotonic excitation... page 23 LASER DIODE DRIVER AND CONTROL ELECTRONICS 1-channel driver LD driver with TEC controller... page 27 2-channel driver Control of 2 LD simultaneously... page 28 3-channel driver. Control of 3 LD simultaneously... page 29 4-channel driver Control of 4 LD simultaneously... page 31 6-channel driver Control of 6 LD simultaneously... page 32 COOLING ACCESSORIES... page

6 - 5 -

7 Solid state laser systems Frequency doubled diode pumped solid state laser systems (DPSS) with up to 4 W at 532 nm are widely used in different measurement applications, such as machine vision, biophotonics illumination or digital printing. For professional laser display and ophthalmology, the OEM modules are ideal componenets for integration. 532 nm up to 4 W Plug and Play systems and OEM modules Dot- and line laser versions - 6 -

8 PEGASUS Linienlaser Diodenlaser Festkörperlaser Solid state laser systems PLUTO Compact, high power With its compact footprint, the DPSS laser PLUTO is especially designed for applications where small space for integration in machine systems and high optical power is requested. With TEM00 beam quality it is an ideal tool for most illumination applications. Via external analog trigger (0-5 V), the output intensity can be modulated DC - 50 khz. In stand alone operation the laser can be controlled by a remote control panel to switch ON and OFF the laser by interlock button. The output power can be set by potentiometer. Model Power (mw) Beam shape Laser class PL.P Dot 3B PL.P Dot 4 PL.P Lzz 400 Line 3B PL.P Lzz 800 Line nm mw Specifications Wavelength 532 nm Optical power 400 mw, 800 mw Spatial mode Low multimode M 2 < 2 Beam diameter < 2 mm Divergence < 1 mrad Power stability (over 1 h) < +/- 5 % Polarisation > 100:1 Modulation (via 0-5 V) DC - 50 khz (-3dB) Power supply voltage 9 VDC Operation current < 5 A (400 mw) < 8 A (800 mw) Laser head dimension 120 x 60 x 30 mm 3 Power supply 207 x 127 x 28 mm 3 Typical applications Laser head OEM driver High speed triangulation Spectroscopy Optical pumping - 7 -

9 PEGASUS Solid state laser systems Linienlaser Diodenlaser Festkörperlaser PLUTO-F Low heat dissipation The diode pumped solid state laser system PLUTO-F is especially designed for applications, where small space and high power up to 3 W is requested. Despite high power the laser shows near TEM00 beam profile with typical M2 < nm mw As the pumping diode is located inside the electronics driver housing, there is only low cooling requirement for the laser head. In stand alone operation the laser can be controlled by a remote control panel as option to switch on and off the laser via interlock button and to adjust output power via potentiometer. Model Power (mw) Beam shape Laser class PL.PF Dot 4 PL.PF Dot 4 PL.PF Lzz 2000 Line 4 PL.PF Lzz 3000 Line 4 Specifications Wavelength 532 nm Optical power 2 W, 3 W Spatial mode Low multimode M2 < Beam diameter < 2 mm Divergence < 1 mrad Power stability < +/- 5 % Polarisation > 100: Modulation (via 0-5 V) DC - 15 khz (-3dB) Power supply voltage +24 / + 5 VDC Laser head dimension 120 x 60 x 30 mm Power supply 244 x 170 x 50 mm3 Typical applications High speed Triangulation Spectroscopy Flow visualisation -8-

10 PEGASUS Linienlaser Diodenlaser Festkörperlaser Solid state laser systems THOR 4 W Plug and Play The diode pumped solid state laser system THOR unifies high output power with near diffraction limited beam quality and low divergence. As the pumping diode is located inside the laser head, there is no fiber connection between laser head and power supply, which maximizes the laser system in flexibility and portability. As universal and cost effectice light source, the laser covers a large variety of industrial and university applications. In "stand alone" operation the laser can be controlled by a remote control panel to switch on and off the laser by interlock button. Features Plug and Play system easy to operate Long lifetime No fiber fed laser head / highest flexibility Beam profile with M 2 < nm / 4 W Specifications Model PL.T Wavelength 532 nm Optical power 4 W Spatial mode TEM00 M 2 < 1.15 (typ. < 1.13) Beam diameter < 2 mm Divergence < 0.5 mrad Power stability < +/- 3 % Polarisation > 100:1 Power supply voltage +24 / + 5 VDC Operation current < 25 A Laser head dimension 300 x 125 x 50 mm 3 Power supply 244 x 170 x 50 mm 3 Laser class (EN ) 4 Typical applications Digital printing TiSa pumping The temperature stabilized system maintains longterm power stability < 3% (typ. < 2% over 8 h) for constant current operation and at constant environment temperature T = 22 C Spectroscopy - 9 -

11 PEGASUS Linienlaser Diodenlaser Festkörperlaser Solid state laser systems MICRO nm OEM module The DPSS modules of the MICRO series are especially designed for easy integration in OEM systems. A small footprint leads to minimized volume of customers system. With divergence < 1 mrad (800 mw version) and < 1.5 mrad (1.6 W version) and near TEM00 mode shape, the beam can be directly used for most applications without any additional optics. Dependent on customers driver the output power can be directly modulated > 50 khz (-3 db). In "stand alone" operation the laser can be controlled by an optional available laboratory driver. Features Low operation current < 8 A at 1.6 W Compact housing for OEM integration Low cooling required Direct modulation > 50 khz (depending on driver) Model Power (mw) Operation current (A) M 2 PL.M < 5 (typ. < 4) < 2 PL.M < 9 (typ. < 8) < nm 800 mw mw Specifications Wavelength 532 nm - Optical power 800 mw, 1600 mw Spatial mode Low multimode Beam diameter (aperture) < 2 mm Divergence < 1.5 mrad Power stability (over 1 h) < +/- 5 % Polarisation > 100:1 (horizontal) Fiber coupling efficiency > 70 % (50 µm) Modulation DC - 50 khz (-3dB) LD operation current < 9 A Laser head dimension 105 x 60 x 25 mm 3 Laser head weight 340 g Laser class (EN ) 4 Amplitude modulation DC - 50 khz The module can be directly modulated with fast customers driver via a 0-5 VDC trigger signal. With rise times < 5 µs, the laser output power can be modulated nearly analog up to 50 khz. This allows the user to trigger the laser with detection system. Typical applications Laser display Optical pumping Trigger Laser power Spectroscopy 10 khz 50 khz

12 - 11 -

13 Diode Laser Systems The diode laser systems in the VIS / IR wavelength range are provided with internal temperature stabilization in order to guarantee a high wavelength and power stability dedicated to high precision surface inspection or optical pumping applications. 405, 450, 520, 638, 650, 785, 810 nm Power up to 12 W Dot- and line laser versions

14 PEGASUS Linienlaser Diodenlaser Festkörperlaser Diode laser systems MINI- Series Compact housing The MINI is a series of medium output power laser modules, available with different wavelengths from VIS to NIR. Exactly the same mechanical dimensions of all models allows to easy exchange from one model with one wavelength to another without any additional adjustment. This makes it easy to find the best suitable laser wavelength, especially for flourescence excitation or scanning on different colored background. Via external trigger signal 0-5 VDC, the output power can be directly modulated DC khz. With temperature stabilization the laser can be operated wtih high power stability in different environments. 405, 450, 520, 532, 638, 650, 810 nm 200 mw mw Features High power with small housing dimension 107 x 45 x 25 mm 3 Temperature / wavelength stabilized OEM integration Dot or line laser version Option: Line generating optics - 15, 30, 45, 60 At factory, the focus distance of the beam or the line can be adjusted to the required projection distance. With standard focussing, it has < 0.5 mm line thickness at 1 m distance. PL.MI PL.MI PL.MI PL.MI PL.MI PL.MI PL.MI PL.MI Wavelength (1) nm Optical power mw Type Diode Diode Diode DPSS DPSS Diode Diode Diode Beam shape rectangular rectangular rectangular circular circular rectangular rectangular rectangular Beam diameter mm < 3.5 x 3.5 < 3.5 x 3.5 < 3.5 x 3.5 < 2.0 < 2.0 < 4.5 x 3.5 < 4.5 x 3.5 < 3.0 x 5.0 Divergence (full angle) mrad < 2.5 x 1.5 < 1.0 x 1.0 < 1.0 x 1.0 < 1.0 < 1.0 < 2.5 x 1.5 < 2.5 x 1.5 < 5.0 x 0.5 Stability % +/- 1 +/- 1 +/- 1 +/- 5 +/- 5 +/- 1 +/- 1 +/- 1 Polarisation > 100 : 1 > 40 : 1 > 100 : 1 > 100 : 1 > 100 : 1 > 40 : 1 > 40 : 1 > 40 : 1 Internal TEC control Yes Yes Yes Yes Yes Yes Yes Yes Operation current A < 2 < 3 < 3 < 3 < 5 < 3 < 5 < 6 Modulation khz > 200 (-3dB) Housing dimension mm 3 Laser head: 107 x 45 x 25 / Adapted driver: 111 x 61 x 28 Cooling has to be attached to external heatsink Laserclass 3B 4 3B 3B 4 3B 4 4 (1) Center wavelenght

15 PEGASUS Linienlaser Diodenlaser Festkörperlaser Diode laser systems MINI-C- Series Integrated driver The MINI-C is a compact laser with high output power up to 500 mw, available with different wavelengths in the "red", "green" or "blue" spectral range. IR wavelenghts are available on request. The optical specifications are similar to the MINI series, but the MINI-C includes the electronic driver in the laser housing. To make the laser an universal stand alone tool mainly for industrial measurement application. With line generator the laser is very easy to use for high speed bright image processing. Via trigger signal 0-5 VDC, the output power can be directly modulated DC khz. With temperature stabilization, the laser can be operated with high power stability in different environments. 405, 450, 520, 532, 638, 650, 810 nm 200 mw mw Features Integrated driver Rugged industrial housing Temperature / wavelength stabilized Dot or line laser version Option: Line generating optics - 15, 30, 45, 60 Typical applications Long range alignment PEGASUS line laser are set-up with special Powell line optics to achieve homogeneous intensity distribution typ. < +/-20 % along the line. Hot steel inspection Fluorescence measurement Amplitude modulation DC khz Most of the machine vision set-ups require a modulating light source to synchronize with the camera. For high speed image capture, the MINI-C laser can be modulated via anloge 0-5 V trigger (lower curve), up 200 khz. PL.MIC PL.MIC PL.MIC PL.MIC PL.MIC PL.MIC PL.MIC PL.MIC Wavelength (1) nm Optical power mw Type Diode Diode Diode DPSS DPSS Diode Diode Diode Beam shape rectangular rectangular rectangular circular circular rectangular rectangular rectangular Beam diameter mm < 3.5 x 3.5 < 3.5 x 3.5 < 3.5 x 3.5 < 2.0 < 2.0 < 4.5 x 3.5 < 4.5 x 3.5 < 3.0 x 5.0 Divergence (full angle) mrad < 2.5 x 1.5 < 1.0 x 1.0 < 1.0 x 1.0 < 1.0 < 1.0 < 2.5 x 1.5 < 2.5 x 1.5 < 5.0 x 0.5 Stability % +/- 1 +/- 1 +/- 1 +/- 5 +/- 5 +/- 1 +/- 1 +/- 1 Polarisation > 100 : 1 > 40 : 1 > 100 : 1 > 100 : 1 > 100 : 1 > 40 : 1 > 40 : 1 > 40 : 1 Internal TEC control Yes Yes Yes Yes Yes Yes Yes Yes Operation current A < 2 < 3 < 3 < 3 < 5 < 3 < 5 < 6 Modulation khz > 200 (-3dB) Housing dimension mm x 60 x 48 Cooling has to be attached to external heatsink Laserclass 3B 4 3B 3B 4 3B 4 4 (1) Center wavelenght

16 PEGASUS Linienlaser Diodenlaser Festkörperlaser Diode laser systems MICRO-LD- Series Highest optical power The PEGASUS MICRO-LD is a high power diode laser module. It is provided with "red" (638 nm), "green" (520 nm) "blue" (450 nm) and violet (405 nm) or other wavelengths on request. The internal temperature stabilization confirms beside a high power stability, also a high wavelength stability, even for changing environment temperatures. Optical power up to 5 W in the blue range at 450 nm in combination with its very compact OEM housing provides an ideal solution for forensic illumination application. With optional available OEM driver, the laser could be modulated DC > 200 khz. Overtemperature protection shut down of the sytem is indicated with red LED. 405, 450, 520, 638, 650, 810 nm Specifications Wavelengths / max. power 405 nm / 0.8 W 450 nm / 5.0 W 520 nm / 1.5 W 638 nm / 1.0 W 660 nm / 1.0 W (others on request) -- Beam size depends on model -- Power stability < +/- 1 % (over 1 h) -- Spatial mode Multimode -- Height of optical axis 14.5 mm -- Operation current < 10 A (depends on model) -- Modulation DC khz -- Laser head dimension 105 x 60 x 25 mm 3 -- Weigh laser head 360 g -- OEM driver dimension 207 x 99 x 30mm 3 -- Laser class (EN ) 4 -- Note: Specifications are given for T = 20 C constant environment. PL.M PL.M PL.M PL.M PL.M PL.M PL.M Available wavelengths (1) nm Optical power (1) mw Beam shape Multimode Multimode Multimode Multimode Multimode Multimode Multimode Beam diameter mm < 3.5 x 4.5 < 3.5 x 3.5 < 4.5 x 4.5 < 3.5 x 3.5 < 4.5 x 4.5 < 4.5 x 3.5 < 4.5 x 4.5 Divergency (full angle) mrad < 1.0 < 1.0 < 1.5 < 1.0 < 1.0 < 1.5 < 1.5 Stability (over 1 h) % Internal TEC control A Modulation (2) khz Housing dimension mm 3 Cooling Laserclass (1) Other wavelengths and power on request (2) depending on driver (not included) < +/- 1 Yes > 200 (-3dB) 105 x 60 x 25 baseplate must be attached to external heatsink

17 - 16 -

18 - 17 -

19 Multicolor laser systems For applications with changing illumination requirements or changing environments, PEGASUS provides multiline laser modules with up to 6 wavelengths output. Mainly for biophotonics excitation and machine vision setups the detection efficiency could be optimized with one device. Systems with up to 6 color channels Dot- and line laser versions

20 PEGASUS Linienlaser Diodenlaser Festkörperlaser Multicolor laser systems MICRO LD series Dual color OEM module The PEGASUS MICRO-LD is a high power two color diode laser module. It is provided with "red" (638 nm), "green" (520 nm) "blue" (450 nm) and violet (405 nm) or other wavelengths on request. With optional adapted electronics driver (OEM or laboratory version), the intensity of each color channel can be controlled simultaneously, independently. Mainly for laser display applications any mixed color in the VIS range can be received at the output, with same laser. The combination with high optical power, makes it also the easiest solution for high speed triangulation systems with different colored samples to reach highest contrast. Model Wavelength / Power* Beam size Divergence (mm x mm) (mrad x mrad) PL.MI.BG nm / 1.4 W 520 nm / 0.8 W <4.5 x 4.5 <1.5 x 0.5 PL.M.BR nm / 2.0 W 638 nm / 0.5 W <3.5 x 4.5 <1.0 x 0.5 PL.M.GR nm / 0.8 W 638 nm / 0.5 W <4.5 x 4.5 <1.5 x 0.5 PL.M.BG nm / 0.3 W 520 nm / 0.8 W <4.5 x 4.5 <1.0 x 0.5 *Other combinations are available on request. Blue + Green Green + Red Red + Blue Specifications Wavelengths / output power 405 nm / 300 mw 450 nm / 1.4 W 520 nm / 800 mw 638 nm / 500 mw 660 nm / 500 mw (others on request) -- Beam size depends on model -- Power stability < +/- 2 % (over 1 h) -- Spatial mode Multimode -- Height of optical axis 14.5 mm -- Operation current < 4 A (depends on model) -- Modulation DC khz (50 khz at 532 nm) -- Laser head dimension 105 x 60 x 25 mm 3 -- Weigh laser head 340 g -- OEM driver dimension 207 x 127 x 24 mm 3 -- Laser class (EN ) 4 -- Typical applications Laser display Fluorescence excitation Very compact dualcolor system High power up to 2.5 W multiline Industrial housing Direct modulation DC khz (depending on driver) Optical pumping

21 PEGASUS Linienlaser Diodenlaser Festkörperlaser Multicolor laser systems TRIUS 3 color channels The PEGASUS TRIUS is a high power laser module with 3 color channels, combined to same optical axis at the output. The VIS RGB version is provided with "red" (638 nm), "green" (520 nm or 532 nm) and "blue" (450 nm), other wavelengths are available on request. Adapted with a Powell optics, the laser is the first high power RGB line laser with homogeneous line distribution For triangulation applications, highest contrast can be received for every kind and color of sample or projection surface, via intensity adjustment or modulation of each separate channel. Model Wavelength / power * Beam shape PL.TR.BGR nm / 0.3 W 4.5 x 4.5 mm 532 nm / 0.5 W 638 nm / 0.3 W PL.TR.BGR nm / 0.5 W 4.5 x 4.5 mm 520 nm / 0.5 W 638 nm / 0.3 W PL.TR.BGR-01/Lzz 450 nm / 1.4 W line 520 nm / 0.8 W 638 nm / 0.5 W PL.TR.GB-01/Lzz 450 nm / 1.4 W line 520 nm / 0.8 W * other wavelengths and powers on request Blue / 450 nm Green / 520 nm Red / 638 nm Specifications Wavelengths / power 450 nm / 1.4 W 520 nm / 800 mw 532 nm / 500 mw 638 nm / 500 mw (others on request) Beam size < 4.5 x 4.5 mm Divergence (half angle) < 0.5 mrad Spatial mode Multimode Power stability < +/-3 % Modulation DC khz (50 khz at 532 nm) Option: line optics 15, 30, 45, 60 Dimension laser head 170 x 90 x 25 mm 3 Weight laser head 360 g Dimension OEM driver 207 x127 x 24 mm 3 Laser class (EN ) 4 Laser head Option: OEM driver Features Dot or line laser version High power RGB multiline Industrial housing Intensity modulation up to 200 khz for each channel separately

22 PEGASUS Linienlaser Diodenlaser Festkörperlaser Multicolor laser systems TIGER Compact multicolor module The PEGASUS TIGER is a high power multicolor diode laser module. It is provided as as "two color" version with up to 3.5 W multiline or as full RGB version with "red" (638 nm), "green" (520 nm) and "blue" (450 nm). With optional adapted electronic driver (OEM or laboratory version), the intensity of each color channel can be controlled simultaneously, independently. Mainly for laser display applications any mixed color in the VIS range can be received at the output, with same laser. The combination with high optical power, makes it also the easiest solution for high speed triangulation systems with different colored samples to reach highest contrast. Model Wavelength / Power* Beam size Divergence (mm x mm) (mrad x mrad) PL.TI.BGR nm / 1.4 W 520 nm / 0.8 W <4.5 x 4.5 <1.5 x nm / 0.5 W PL.TI.BG nm / 2.0 W 520 nm / 1.5 W <3.5 x 4.5 <1.0 x 0.5 PL.TI.BGR nm / 0.4 W 520 nm / 0.8 W <4.5 x 4.5 <1.5 x nm / 0.5 W PL.TI.BGR nm / 1.4 W 520 nm / 0.8 W <4.5 x 4.5 <1.0 x nm / 0.5 W *Other combinations are available on request. Red / 635, 638 nm Green / 520 nm Blue / 450 nm Specifications Wavelengths / output power 405 nm / 300 mw 450 nm / 1.4 W 520 nm / 800 mw 638 nm / 500 mw 660 nm / 500 mw (others on request) -- Beam size depends on model -- Power stability < +/- 2 % (over 1 h) -- Spatial mode Multimode -- Height of optical axis 50.4 mm -- Operation current < 5 A -- Modulation / channel DC khz -- Laser head dimension x 46 x 65 mm 3 -- Weigh laser head 360 g -- OEM driver dimension 129 x 61 x 28 mm 3 -- Laser class (EN ) 4 -- Typical applications Laser display Fluorescence excitation Very compact RGB system High power up to 3.5 W multiline Industrial housing Direct modulation up to 200 khz (depending on driver) Optical pumping

23 Multicolor laser systems TIGER Multicolor module Power control for each channel via 0-5 V Amplitude modulation DC khz Pmax Output power 0 0 VDC (OFF) Mod In trigger (VDC) 5 VDC (Pmax) With the PEGASUS OEM driver (option), each color channel of the TIGER can be controlled simultaneously, independently. Via analog 0-5 V signal, it can be directly modulated DC khz (-3dB). Back view Front view 8 PIN connector Pin 1 LD+ (channel 3) Pin 2 LD+ (channel 1) Pin 3 LD+ (channel 2) Pin 4 LD+ (channel 4) Pin 5 LD- (channel 4) Pin 6 LD- (channel 1) Pin 7 LD- (channel 3) Pin 8 LD- (channel 2) Note: The baseplate of the laser head must be actively cooled to 20 C. 4 PIN connector Pin 1 NTC Temp (baseplate) Pin 2 NTC Temp (baseplate) Pin Pin Laser head Option: OEM driver All dimensions are given in mm

24 PEGASUS Linienlaser Diodenlaser Festkörperlaser Multicolor laser systems SIXTUS 6-channel optical engine The PEGASUS SIXTUS is the most compact optical engine with up to 6 different wavelengths channels. All channel outputs are combined and coupled into one multimode fiber (singlemode on request) to have a most versatile system for any kind of biotechnical and life science illumination applications. Depending on specimen, the customer can choose combination of wavelengths in order to achieve maximum excitation efficiency for a large variety of fluorescence molecules with only one device. 405, 450, 520, 638, 660, 810 nm Features Up to 6 different wavelengths in the VIS/NIR range High power version with up to 3 wavelengths Analog modulation > 200 khz / channel Very compact housing Specifications Pmax Power control for each channel via 0-5 V Output power 0 0 VDC (OFF) Mod In trigger (VDC) 5 VDC (Pmax) With optional adapted electronic benchtop driver, the intensity of each color channel can be controlled simultaneously, independently via analogue 0-5 VDC trigger signal. It allows high speed modulation and fast switching between individual laser wavelengths. Available wavelengths 405 nm 450 nm 520 nm 638 nm 660 nm 785 nm 810 nm (others on request) Power stability < +/- 2 % (over 1 h) MM fiber coupling 50, 100, 200, 400, 800 µm (SM fiber on request) Analog modulation DC khz Laser head dimension 220 x 125 x 48 mm 3 Weigh laser head 510 g Laser class (EN ) 4 Available wavelengths * nm Maximum optical power mw Type Diode Diode Diode Diode Diode Diode Diode Beam shape Multimode Multimode Multimode Multimode Multimode Multimode Multimode Beam diameter (1/e2) ** mm < 3.5 x 4.5 < 3.5 x 4.5 < 3.5 x 4.5 < 3.5 x 4.5 < 3.5 x 4.5 < 3.5 x 4.5 < 3.5 x 4.5 Divergency (full angle) ** mrad < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 < 1.0 Fiber coupling Stability (over 1 h) % Operation current A Modulation *** khz Housing dimension mm 3 Cooling Laserclass * Center wavelenght ** Freespace version *** depending on driver (not included) Multimode 50µm, 100µm, 200µm, 400µm, 800µm / NA 0.22 / SMA fiber connector < +/- 3 < 15 > 200 (-3dB) 220 x 125 x 48 must be attached to external heatsink

25 Multicolor laser systems SIXTUS 6-channel optical engine Option: 6-channel benchtop driver The adapted benchtop driver model PL.LD230/6C/2T with 6 LD power supplies and TEC controller provides a turn key solution for operation of the SIXTUS laser module. Amplitude modulation DC khz Via potentiometer, the intensity of each channel can be controlled between 0 and Imax. External trigger signal allows independent modulation of each channel DC khz. Option: Fiber collimator Option: Cooling modules Fixed SMA fiber collimators are available with output diameters on customers requirement. For variable projection distances, focus adjustable collimators are provided. The laser base plate must be conductively cooled via air- or water coolier. Adapted PEGASUS air cooling aggregates are available with fan diameter 30 mm or 60 mm, depending on operation environment. Models can be chosen from combinations of 10 different wavelengths and different power levels. Channel wavelengths (nm) / power (mw) Remark PL.SI.BGRI / / / / / / different channels PL.SI.BGRI / / / / / / 1000 doubled red PL.SI.BGR / / / / / / different colors; doubled blue, green and red Note: Only popular combinations are shown

26 - 25 -

27 Laser diode driver and control electronics OEM drivers for integration and benchtop drivers for Plug and Play applications Controller for up to 6 LD channels simultaneously Analog modulation input for external control Option: internal frequency generator

28 Diode driver assemblies Laser Diode controller 1 LD channel output For easy operation as turn key laser system of PEGASUS laser PLUTO or MICRO series, the laser head could be adapted with laboratory benchtop driver. Depending on application, the laboratory driver is available with internal frequency generator as option. It provides rectangular signals up to 100 khz. Via control panel, the user can switch between internal frequency generation or external trigger input 0-5 V. Laboratory version The OEM drivers are dedicated to industrial applications with limited space. The baseplate of the OEM modules have to be adequately heatsinked. To prevent the laser from overheating, the driver inhibits overtemperature switch off, indicated by red LED. OEM versions: Laser Diode driver including 2 TEC controller Features Model PL.LD230/10-1 LD current source 0-6 A or 0-10 A (2 versions) Adjustable output current limit External analog MOD IN 0-5 VDC External modulation bandwidth DC - 15 khz 2 TEC controller Channel 1 +/- 2.0 A (heating / cooling) Channel 2 +/- 1.2 A (heating / cooling) Temperature stability < +/-0.1 C NTC 10 kohm at 25 C ---- Power supply voltage VAC Key switch Safety interlock ON/OFF 12 VDC output for laser air cooler Option: internal frequency generator (DC khz) (Model PL.LD230/10-F1) I(LD) A Power supply voltage 9 VDC Dimension 129 x 61 x 28 mm 3 I(LD) 0-6 A Power supply voltage 9 VDC Dimension 207 x 127 x 28 mm 3 Combination to PLUTO series MINI series I(LD) 0-10 A Power supply voltage 5 / 9 VDC Dimension 207 x 99 x 30 mm 3 MICRO series

29 Diode driver assemblies 2 channel Laser Diode controller The PEGASUS dual channel driver, allows the user to control the current of 2 laser diodes up to 2 A. In combination with integrated controller for thermo electric cooler (TEC), the benchtop device is an ideal accessorie for a plug and play laser system. The temperature controller is compatible with standard thermistors. The front panel offers a very easy operation with current adjustment potentiometer and information display for each channel. Laboratory version The OEM drivers are dedicated to industrial applications with limited space. The baseplate of the OEM modules have to be adequately heatsinked. To prevent the laser from overheating, the driver inhibits overtemperature switch off, indicated by red LED. Dual channel LD driver including TEC controller Features Model PL.LD230-2C LD current sources 0-2 A (each channel) ---- Adjustable output current limit for each channel ---- External analog MOD IN 0-5 VDC ---- Modulation frequency DC khz ---- TEC controller +/- 2.0 A (heating / cooling) ---- NTC 10 kohm at 25 C ---- Temperature stability < +/-0.1 C ---- Power supply voltage VAC ---- Key switch ---- Safety interlock ON/OFF VDC output for laser air cooler ---- OEM version: Power supply voltage 9 VDC Dimension 169 x 62 x 24 mm 3 9 PIN power connector Pin Pin Pin 3 MOD IN / 0-5 V (CH 2) Pin Pin 5 MOD IN / 0-5 V (CH 1) Pin VDC Pin VDC Pin 8 GND Pin 9 GND 15 PIN connector Pin 1 NTC Pin 2 NTC Pin Pin Pin Pin 6 TEC+ Pin 7 LD+ (CH 1) Pin 8 LD+ (CH 2) Pin 9 NTC Pin 10 NTC Pin Pin Pin 13 TEC- Pin 14 LD- (CH1) Pin 15 LD- (CH 2) Combination to MICRO LD dual line series

30 Diode driver assemblies 3 Channel Laser Diode Controller The PEGASUS multichannel driver PL.LD230-3C-1, allows the user to control the current of 3 laser diodes up to 6 A. In combination with integrated controller for thermo electric cooler (TEC), the benchtop device is an ideal accessorie for a plug and play laser system. The temperature controller is compatible with standard thermistors. The front panel offers a very easy operation with current adjustment potentiometer and information display for each channel. Laboratory version The OEM drivers are dedicated to industrial applications with limited space. The baseplate of the OEM modules have to be adequately heatsinked. To prevent the laser from overheating, the driver inhibits overtemperature switch off, indicated by red LED. Multichannel LD driver including 2 TEC controller Features Model PL.LD230-3C-1 3 LD current sources Channel A Channel 2 and A Adjustable output current limit for each channel External analog MOD IN 0-5 VDC / channel Modulation frequency DC khz 2 TEC controller Channel 1 +/- 2.0 A (heating / cooling) Channel 2 +/- 1.2 A (heating / cooling) NTC 10 kohm at 25 C Temperature stability < +/-0.1 C Power supply voltage VAC Key switch Safety interlock ON/OFF Adjustable maximum output current 12 VDC output for air cooler OEM version: (see also following page) Power supply voltage 9 VDC Dimension 207 x 127 x 28 mm 3 Combination to MICRO LD dual line series TRIUS series

31 Diode driver assemblies 3 Channel Laser Diode Controller OEM version In industrial applications the OEM controller model PL.TRD.9V-** can be used to operate the PEGASUS TRIUS or customer laser with up to 3 LD channels. To protect each laser diode from overheating, the driver inhibits an overtemperature switch off, which is indicated with red LED at the front panel. 9 PIN power connector Pin 1 GND Pin VDC out Pin 3 MOD IN / 0-5 V (CH 1) Pin 4 Overtemp read out Pin VDC Pin 6 GND Pin 7 MOD IN / 0-5 V (CH 2) Pin 8 MOD IN / 0-5 V (CH 3) Pin VDC An optional remote control panel allows the user to adjust the intensity of all 3 channels simultaneously via potentiometer. 15 PIN connector Pin 1 LD- (CH 2) Pin 2 LD- (CH 2) Pin 3 LD+ (CH 2) Pin 4 LD+ (CH 2) Pin 5 TEC+ (CH 2) Pin 6 TEC+ (CH 2) Pin 7 TEC- (CH 2) Pin 8 TEC- (CH 2) Pin 9 LD- (CH 3) Pin 10 LD+ (CH 3) Pin 11 TEC+ CH 1, 3) Pin 12 LD- (CH 1) Pin 13 LD+ (CH 1) Pin 14 NTC Pin 15 NTC Pin Pin Pin Pin Pin Pin 21 NTC (CH 2) Pin 22 NTC (CH 2) Pin 23 NTC (CH 1, 3) Pin 24 NTC (CH 1, 3) Pin 25 TEC- (CH 1, 3) Multichannel LD driver including 2 TEC controller Features Model PL.TRD.9V 3 LD current sources Channel A Channel 2 and A Adjustable output current limit for each channel External analog MOD IN 0-5 VDC / channel Modulation frequency DC khz 2 TEC controller Channel 1 +/- 2.0 A (heating / cooling) Channel 2 +/- 1.2 A (heating / cooling) NTC 10 kohm at 25 C Temperature stability < +/-0.1 C Power supply voltage 9 VDC Adjustable maximum output current / channel Dimension 207 x 127 x 24 mm 3 Via 3 separate analogue 0-5 VDC modulation inputs, the current of each channel can be controlled separately with external triggers. Channel 1 Channel 2 Channel

32 Diode driver assemblies 4 channel Laser Diode controller The PEGASUS multichannel driver PL.LD230-4C-1, allows the user to control the current of 4 laser diodes up to 2 A. The benchtop device is an ideal accessorie for a plug and play laser system. The front panel offers a very easy operation with current adjustment potentiometer and information display for each channel. Multichannel LD driver Features Laboratory version Model PL.LD230-4C-1 4 LD current sources 0-2 A (ech channel) Adjustable output current limit for each channel External analog MOD IN 0-5 VDC Modulation frequency DC khz Power supply voltage VAC Key switch Safety interlock ON/OFF Adjustable maximum output current 12 VDC output for air cooler The OEM drivers are dedicated to industrial applications with limited space. The baseplate of the OEM modules have to be adequately heatsinked. To prevent the laser from overheating, the driver inhibits overtemperature switch off, indicated by red LED. OEM version OEM version: 9 PIN power connector Pin 1 MOD IN / 0-5 V (CH 1) Pin 2 MOD IN / 0-5 V (CH 2) Pin 3 MOD IN / 0-5 V (CH 3) Pin 4 MOD IN / 0-5 V (CH 4) Pin Pin VDC Pin VDC Pin 8 GND Pin 9 GND Power supply voltage 12 VDC Dimension 129 x 61 x 28 mm 3 15 PIN connector Pin 1 LD+ (CH 1) Pin 2 LD+ (CH 2) Pin 3 LD- (CH 2) Pin Pin Pin 6 LD+ (CH 3) Pin 7 LD- (CH 3) Pin 8 LD+ (CH 4) Pin 9 LD- (CH 1) Pin Pin Pin Pin Pin Pin 15 LD- (CH 4) Combination to MICRO LD dual line series TIGER

33 Diode driver assemblies 6 channel Laser Diode controller The PEGASUS multichannel driver PL.LD230/6C/2T/A, allows the user to control the current of 6 different high power laser diodes up to 2 A (constant current) each. With 2 integrated TEC controller, different channels can be set at factory to different temperature set points in order to optimize LD wavelengths and efficiencies. The temperature controller is compatible with standard thermistor 10 kohm = 25 C. To prevent the adapted laser from overheating, the driver inhibits overtemperature switch off. The front panel offers a very easy operation with current adjustment potentiometer and information display for each channel. Overtemperature switch off is indicated by red LED. Front panel Via front panel switch, the device provides different operation modes: In internal mode, the current of each channel can be directly controlled with potentiometer. In external mode, analoge modulation up to 200 khz for each channel is possible, supplied by external trigger signal to BNC connectors at the rear panel. Trim potis allow the setting of minimum and maximum current limit to reduce the risk of accidental adjustment. Multichannel LD driver including 2 TEC controller Features Model PL.LD230/6C/2T/A LD current sources 0-2 A (each channel) Adjustable output current limit for each channel External analog MOD IN 0-5 VDC Modulation frequency bandwidth DC khz TEC controller Channel 1 +/- 2.0 A (heating / cooling) Channel 2 +/- 1.2 A (heating / cooling) Temperature stability < +/-0.1 C Overtemperature switch off Key switch Safety interlock ON/OFF VDC output for air cooler Combination to SIXTUS series Rear panel TIGER series MICRO LD series

34 - 33 -

35 Cooling accessories Air cooling modules Water cooling modules TEC cooling modules

36 PEGASUS ACCESSORIES Cooling modules For each laser PEGASUS laser head and electronics driver, adapted cooling modules are available. Depending on environmental temperature, cooling modules can be provided either as air cooling or as water cooling versions. Air cooling modules Powerful, low vibrational fans Fan diameter 30 mm or 60 mm (2 versions) Operation for environment up to 30 C Fastening threads adapted to PEGASUS laser Power supply voltage 24 VDC or 12 VDC TEC cooling modules Combined modules with TEC and fans Active TEC controller Stability < +/- 0.5 C Operation for environment up to 35 C Overtemperature control Fastening threads adapted to PEGASUS laser Power supply voltage 12 VDC Water cooling modules For high environment temperature Small height 20 mm for low space setup Fastening threads, adapted to PEGASUS laser Standard water connectors 1/4 Flow rate typ. < 2 l/min

37 PEGASUS Order information Specifications Technical specifications are subject to change without notification. The suitability of a product for its intended use should be checked through the customer before ordering. Shipping Unless given a written instruction PEGASUS shall select the carrier. PEGASUS will select the most efficient and economical method. In case of a preferred shipping carrier the customer has to give the name, address, phone number of the shipper. The delivered goods have to be checked without delay. Obvious defects must be written presented to PEGASUS within 10 days after receipt of the goods. Price All prices listed are in EUR and subject to change without notification. All products are shipped from respective factory. All additional costs as packaging, customs duty, VAT and insurance will be added on invoice. Payment The invoices are billed in EURO and should be paid within 30 days net. PEGASUS reserves the right to require full or particular payments in advance. Returns The customer has to return the product prepaid and insured to PEGASUS, under PEGASUS RMA number. If the complaint is in time and rightful it is subject to PEGASUS to select according guarantee to improve the goods or to deliver other perfect goods. Where any product is returned without any itemized statement of claimed defects PEGASUS will not evaluate the product but will return it to the customer at the customer expense... Errors excepted. All sales are based on our present business terms and sales conditions

38 PEGASUS Notes

39 PEGASUS Notes

40 PEGASUS Linienlaser Diodenlaser Festkörperlaser PEGASUS LASERSYSTEME GMBH Marie Curie Straße 23 D Wallenhorst Tel.: +49 (0) Fax: +49 (0) info@pegasus-lasersysteme.de

SpectraTec II. Polarized Multi-Laser Source BLUE SKY RESEARCH WAVELENGTHS. The SpectraTec II

SpectraTec II. Polarized Multi-Laser Source BLUE SKY RESEARCH WAVELENGTHS. The SpectraTec II BLUE SKY RESEARCH The SpectraTec II, two wavelength laser module is a highly integrated system comprised of two lasers, individual driving and temperature control electronics, wavelength combining, and

More information

Single Mode Fiber Lasers

Single Mode Fiber Lasers Single Mode Fiber Lasers for Industrial and Scientific Applications T h e P o w e r t o T r a n s f o r m T M IPG s Single Mode Fiber Lasers Advantages IPG's YLR-SM Series represents a break-through generation

More information

Laserlyte-Flex Alignment System

Laserlyte-Flex Alignment System Laserlyte-Flex Alignment System LaserLyte-Flex The LaserLyte-Flex Alignment System is a unique, interchangeable, low cost plug and play laser system. Designed specifically for aligning and positioning

More information

Laser diffuse reflection light scanner with background suppression. Dimensioned drawing

Laser diffuse reflection light scanner with background suppression. Dimensioned drawing Specifications and description HRTL 3B Laser diffuse reflection light scanner with background suppression Dimensioned drawing We reserve the right to make changes DS_HRTL3B_en.fm en 01-2010/12 50114049

More information

DIODE PUMPED CRYSTALASER

DIODE PUMPED CRYSTALASER DIODE PUMPED CRYSTALASER Ultra-compact CW & Pulsed Turnkey Systems UV Visible to IR High Reliability High Stability High Efficiency TEMoo & SLM Low Noise Low Cost ULTRA-COMPACT DIODE-PUMPED CRYSTAL LASER

More information

APPLICATION NOTE. Basler racer Migration Guide. Mechanics. www.baslerweb.com. Flexible Mount Concept. Housing

APPLICATION NOTE. Basler racer Migration Guide. Mechanics. www.baslerweb.com. Flexible Mount Concept. Housing 62 62 APPLICATION NOTE www.baslerweb.com Basler racer Migration Guide This paper describes what to consider when replacing the Basler L100 Camera Link or the Basler runner Gigabit Ethernet (GigE) line

More information

Guideline Laser Series

Guideline Laser Series Guideline Laser Series Highly visible alignment laser for visually demanding surfaces Red / Green long visible lines Equal brightness across length of the line Uniform Line (no fading at ends of the line)

More information

RAY TRACING UNIFIED FIELD TRACING

RAY TRACING UNIFIED FIELD TRACING RAY TRACING Start to investigate the performance of your optical system using 3D ray distributions, dot diagrams of ray positions and directions, and optical path length. GEOMETRIC FIELD TRACING Switch

More information

Optical Fiber Switches

Optical Fiber Switches Optical Fiber Switches volume 2 contents 1 introduction 3 Piezo electrically driven optical switches 3 2 technology 4 Important parameters to characterize an optical fi ber switch 4 Multimode switches

More information

Single Photon Counting Module COUNT -Series

Single Photon Counting Module COUNT -Series Description Laser Components COUNT series of s has been developed to offer a unique combination of high photon detection efficiency, wide dynamic range and ease of use for photon counting applications.

More information

NLC 800 Air-Cooled Argon-ion Laser

NLC 800 Air-Cooled Argon-ion Laser NLC 800 Air-Cooled Argon-ion Laser User s Manual Complete with Operating Instructions for the 8470 and 2270 Power Supply TABLE OF CONTENTS CHAPTER 1: INTRODUCTION 1 CHAPTER 2: LASER SAFETY 2 CENTER FOR

More information

Example of SOP for IR Laser

Example of SOP for IR Laser Example of SOP for IR Laser Standard Operating Procedures (SOP) for Class 4 HPD semiconductor Laser Manufacturer HPD Building & Room Number EH&S 101 Model Number HPD-1/100/975 Laser Class 4 Serial Number

More information

SENSORS. Miniature Sensors - S3Z. Advanced line of miniature Asian style of photoelectric sensors. 40-300 mm background suppression

SENSORS. Miniature Sensors - S3Z. Advanced line of miniature Asian style of photoelectric sensors. 40-300 mm background suppression Advanced line of miniature Asian style of photoelectric sensors 4-3 background suppression.7 m proximity, 15 with narrow beam 4 m polarized retroreflective 3 m LASER through beam Standard 3-wire output

More information

User and installation manual

User and installation manual User and installation manual aquaero 5 The information contained in this manual is subject to change without prior notice. All rights reserved. Current as of April 2011 ENGLISH: PAGE 1 DEUTSCH: SEITE 13

More information

ROFIN FL SERIES. High Brightness Fiber Lasers Precise, Fast and Reliable.

ROFIN FL SERIES. High Brightness Fiber Lasers Precise, Fast and Reliable. LASER MACRO ROFIN FL SERIES High Brightness Fiber Lasers Precise, Fast and Reliable. T H E P O W E R O F L I G H T ROFIN FL SERIES THE PRODUCT Ideal Beam Quality for Every Application The high brightness

More information

LUT Luminescence scanners: Seeing what no-one else can

LUT Luminescence scanners: Seeing what no-one else can LUT Luminescence scanners Luminescence scanners LUT Luminescence scanners: Seeing what no-one else can Special features: A semi-conductor light source is used in the LUT series no lamp change required.

More information

LS-1 Series Tungsten Halogen Light Sources Installation and Operation Instructions

LS-1 Series Tungsten Halogen Light Sources Installation and Operation Instructions LS-1 Series Tungsten Halogen Light Sources Installation and Operation Instructions Description The LS-1 Series of tungsten halogen light sources are versatile, white-light lamps optimized for use in the

More information

Nano-Spectroscopy. Solutions AFM-Raman, TERS, NSOM Chemical imaging at the nanoscale

Nano-Spectroscopy. Solutions AFM-Raman, TERS, NSOM Chemical imaging at the nanoscale Nano-Spectroscopy Solutions AFM-Raman, TERS, NSOM Chemical imaging at the nanoscale Since its introduction in the early 80 s, Scanning Probe Microscopy (SPM) has quickly made nanoscale imaging an affordable

More information

HIGH POWER FREE SPACE AND FIBER PIGTAILED ISOLATORS

HIGH POWER FREE SPACE AND FIBER PIGTAILED ISOLATORS NEW HIGH POWER FREE SPACE AND FIBER PIGTAILED ISOLATORS Features: New! Reduced size and cost versions Reliable high power handling: As much as 80 Watts High Isolation, up to 50dB isolation possible from

More information

Quasi-Continuous Wave (CW) UV Laser Xcyte Series

Quasi-Continuous Wave (CW) UV Laser Xcyte Series COMMERCIAL LASERS Quasi-Continuous Wave (CW) UV Laser Xcyte Series Key Features 355 nm outputs available Quasi-CW UV output Field-proven Direct-Coupled Pump (DCP ) TEM00 mode quality Light-regulated output

More information

Remote Control Repeater

Remote Control Repeater Remote Control Repeater Model: 40430 Operation Manual Ver.1.0 Operation Manual Remote Control Repeater Model: 40430 Thank you for purchasing Remote Control Repeater. We recommend that you read this manual

More information

Air-Cooled, Direct-Diode Laser System. IDL Series

Air-Cooled, Direct-Diode Laser System. IDL Series Air-Cooled, Direct-Diode Laser System IDL Series www.lumentum.com Data Sheet IDL Series air-cooled, direct-diode laser systems combine our high-reliability L4 diode lasers with a unique fused-fiber individual-emitter

More information

LASER-PROTECTION INFORMATION

LASER-PROTECTION INFORMATION LASER-PROTECTION INFORMATION µspeed-systems Version V2.0 Creation date: 18.07.2012 page 1/8 LASER PROTECTION The µspeed sensor system is a laser-based measuring system. When using a µspeed, it is necessary

More information

Rodenstock Photo Optics

Rodenstock Photo Optics Rogonar Rogonar-S Rodagon Apo-Rodagon N Rodagon-WA Apo-Rodagon-D Accessories: Modular-Focus Lenses for Enlarging, CCD Photos and Video To reproduce analog photographs as pictures on paper requires two

More information

Product Information Sheet UH28CS-12kV Hi Pot Tester

Product Information Sheet UH28CS-12kV Hi Pot Tester Product Information Sheet UH28CS-12kV ETL Prüftechnik GmbH Telefon: +49 711 83 99 39-0 E-Mail: info@etl-prueftechnik.de Carl-Peters-Straße 23 D-70825 Korntal-Münchingen Telefax: +49 711 83 99 39-9 Internet:

More information

Compact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications

Compact Sensors - S8 Series. Compact size and high performance for the most challenging detection applications Compact size and high performance for the most challenging detection applications Compact dimensions (14x42x25 mm) Background suppression for transparent and shiny objects High speed contrast sensor up

More information

SYSTEM 4C. C R H Electronics Design

SYSTEM 4C. C R H Electronics Design SYSTEM 4C C R H Electronics Design SYSTEM 4C All in one modular 4 axis CNC drive board By C R Harding Specifications Main PCB & Input PCB Available with up to 4 Axis X, Y, Z, A outputs. Independent 25

More information

DCP Fan Controller. Version 01/2009. The engineer s choice

DCP Fan Controller. Version 01/2009. The engineer s choice Version 01/2009 The engineer s choice Index Page 1. Introduction... 3 2. Technical specification... 4 3. Connection diagrams... 9 4. Configuration... 10 5. Compatible ebm-papst Fan List... 11 2 1. Introduction

More information

L-LAS-TB-CL serie. laser light curtains for inline measuring tasks

L-LAS-TB-CL serie. laser light curtains for inline measuring tasks L-LAS-TB-CL serie laser light curtains for inline measuring tasks Maximum distance 2.000 mm Measurement range 6 up to 98 mm Resolution up to 4 µm up to 1,5 khz scan rate 0-10 V or 4-20 ma analogue output

More information

ZEISS Axiocam 506 color Your Microscope Camera for Imaging of Large Sample Areas Fast, in True Color, and High Resolution

ZEISS Axiocam 506 color Your Microscope Camera for Imaging of Large Sample Areas Fast, in True Color, and High Resolution Product Information Version 1.0 ZEISS Axiocam 506 color Your Microscope Camera for Imaging of Large Sample Areas Fast, in True Color, and High Resolution ZEISS Axiocam 506 color Sensor Model Sensor Pixel

More information

Tube Control Measurement, Sorting Modular System for Glass Tube

Tube Control Measurement, Sorting Modular System for Glass Tube Tube Control Measurement, Sorting Modular System for Glass Tube Tube Control is a modular designed system of settled instruments and modules. It comprises measuring instruments for the tube dimensions,

More information

LED red (-): Measuring value < lower tolerance threshold LED red (+): Measuring value > upper tolerance threshold. Page 1/6

LED red (-): Measuring value < lower tolerance threshold LED red (+): Measuring value > upper tolerance threshold. Page 1/6 L-LAS Series L-LAS-LT-165-CL - Line laser 1 mw, laser class 2 - Visible laser line (red light 670 nm), typ. 2 mm x 3 mm - Reference distance approx. 165 mm - Measuring range typ. 65... 265 mm - Resolution

More information

ITA3D 710. RGB DMX laser with 3D effect. User manual

ITA3D 710. RGB DMX laser with 3D effect. User manual ITA3D 710 RGB DMX laser with 3D effect User manual 1 Safety precautions WARNING: This unit may cause serious injury to eyesight when used incorrect. It therefore is strongly advised to read this user manual

More information

sensors Miniature Sensors - S100 The universal miniature photoelectric sensor

sensors Miniature Sensors - S100 The universal miniature photoelectric sensor Miniature Sensors - S1 The universal miniature photoelectric sensor Two threaded front mounting holes Two slotted rear mounting holes Anti-tampering sensor (no adjustment) Standard optic functions and

More information

LASER SHOW SYSTEM LUNA. User's Manual

LASER SHOW SYSTEM LUNA. User's Manual LASER SHOW SYSTEM LUNA User's Manual DMX Address Chart This chart lists the DMX dipswitch setting for DMX address 1 through 511. Follow the instructions below to configure fixture dipswitches with you

More information

SYSTEM 45. C R H Electronics Design

SYSTEM 45. C R H Electronics Design SYSTEM 45 C R H Electronics Design SYSTEM 45 All in one modular 4 axis CNC drive board By C R Harding Specifications Main PCB & Input PCB Available with up to 4 Axis X, Y, Z, & A outputs. Independent 25

More information

RGB Light Panel Applications. RGB LED Light Panel FEATURES & BENEFITS SPECIFICATION SHEET

RGB Light Panel Applications. RGB LED Light Panel FEATURES & BENEFITS SPECIFICATION SHEET RGB LED Light Panel E346146 E325925 FEATURES & BENEFITS AVAILABLE IN CUSTOM SIZES & SHAPES CAN BE USED IN FRAMELESS DESIGNS 3D V-CUTTING TECHNOLOGY MULTI-COLOR OPTION HIGH BRIGHTNESS (2,000-10,000 LUX)

More information

INTRODUCTION FIGURE 1 1. Cosmic Rays. Gamma Rays. X-Rays. Ultraviolet Violet Blue Green Yellow Orange Red Infrared. Ultraviolet.

INTRODUCTION FIGURE 1 1. Cosmic Rays. Gamma Rays. X-Rays. Ultraviolet Violet Blue Green Yellow Orange Red Infrared. Ultraviolet. INTRODUCTION Fibre optics behave quite different to metal cables. The concept of information transmission is the same though. We need to take a "carrier" signal, identify a signal parameter we can modulate,

More information

MRC High Resolution. MR-compatible digital HD video camera. User manual

MRC High Resolution. MR-compatible digital HD video camera. User manual MRC High Resolution MR-compatible digital HD video camera User manual page 1 of 12 Contents 1. Intended use...2 2. System components...3 3. Video camera and lens...4 4. Interface...4 5. Installation...5

More information

High Power Fiber Laser Technology

High Power Fiber Laser Technology High Power Fiber Laser Technology Bill Shiner VP Industrial September 10, 2013 IDOE LSO Workshop Global Production Facilities Production Facilities and World Headquarters Oxford, Massachusetts Production

More information

Welcome to this presentation on LED System Design, part of OSRAM Opto Semiconductors LED 101 series.

Welcome to this presentation on LED System Design, part of OSRAM Opto Semiconductors LED 101 series. Welcome to this presentation on LED System Design, part of OSRAM Opto Semiconductors LED 101 series. 1 To discuss the design challenges of LED systems we look at the individual system components. A basic

More information

RIEGL VQ-480. Airborne Laser Scanning. Airborne Laser Scanner with Online Waveform Processing. visit our website www.riegl.com

RIEGL VQ-480. Airborne Laser Scanning. Airborne Laser Scanner with Online Waveform Processing. visit our website www.riegl.com Airborne Laser Scanner with Online Waveform Processing RIEGL VQ-48 high-accuracy ranging based on echo digitization and online waveform processing high laser repetition rate - fast data acquisition multiple

More information

Flame Direct Attach UV-VIS Integrated Sampling System Installation and Operation Instructions

Flame Direct Attach UV-VIS Integrated Sampling System Installation and Operation Instructions Flame Direct Attach UV-VIS Integrated Sampling System Installation and Operation Instructions Description The Flame Integrated Sampling System (FLAME-DA-CUV-UV-VIS) is a snap-on, direct-attach 1 cm cuvette

More information

LATAB Industrial LED Lighting

LATAB Industrial LED Lighting LED Lighting for Machine Vision Catalog 2014/2015 LAT elektronik AB Member of the Polytec Organization www.latab.net LED lighting for machine vision About LAT elektronik AB (LED Array Technology) was founded

More information

SZI 1029. IR Audio Transmission Technology Modulators/Radiators

SZI 1029. IR Audio Transmission Technology Modulators/Radiators General Description The is a 5-W high-power radiator for use with all wideband and narrowband modulators. The radiator is automatically switched on by the RF carrier and can cover areas of up to 800 m

More information

INFRARED PARTS MANUAL

INFRARED PARTS MANUAL INFRARED PARTS MANUAL PIR325 FL65 GLOLAB CORPORATION Thank you for buying our Pyroelectric Infrared components. The goal of Glolab is to produce top quality electronic kits, products and components. All

More information

SENSORS. Fiber Optic Sensors - S70. Advanced fiber optic amplifiers for high speed and low contrast applications

SENSORS. Fiber Optic Sensors - S70. Advanced fiber optic amplifiers for high speed and low contrast applications Fiber Optic Sensors - S7 Advanced fiber optic amplifiers for high speed and low contrast applications DIN rail mountable models with dual digital displays speed models: 2 μs...5 ms Super high speed models:

More information

Lab 9: The Acousto-Optic Effect

Lab 9: The Acousto-Optic Effect Lab 9: The Acousto-Optic Effect Incoming Laser Beam Travelling Acoustic Wave (longitudinal wave) O A 1st order diffracted laser beam A 1 Introduction qb d O 2qb rarefractions compressions Refer to Appendix

More information

Datasheet Preliminary

Datasheet Preliminary Line Scan Camera Datasheet Preliminary Main Features Sensor: 3 or 4 x 4096 pixels 10 x 10 µm Multi-line with 3 Versions (each of them in Full or Low speed): RGB RGB + Monochrome RGB + Near Infra Red Rows

More information

Automatisierte, hochpräzise Optikmontage Lösungen für die Industrie

Automatisierte, hochpräzise Optikmontage Lösungen für die Industrie Automatisierte, hochpräzise Optikmontage Lösungen für die Industrie Alexander Steinecker, CSEM Trends in Micro Nano, HSLU, Horw, 5. Dezember 2013 High power laser sources Motivation Laser manufacturing

More information

LBS-300 Beam Sampler for C-mount Cameras. YAG Focal Spot Analysis Adapter. User Notes

LBS-300 Beam Sampler for C-mount Cameras. YAG Focal Spot Analysis Adapter. User Notes LBS-300 Beam Sampler for C-mount Cameras P/N SP90183, SP90184, SP90185 and SP90186 YAG Focal Spot Analysis Adapter P/N SP90187, SP90188, SP90189, SP90190, SP90191 User Notes Ophir-Spiricon Inc. 60 West

More information

1-613-695-5550 ADVANCED DIGITAL SOLUTIONS SERVICE NUMBER

1-613-695-5550 ADVANCED DIGITAL SOLUTIONS SERVICE NUMBER ADVANCED DIGITAL SOLUTIONS SERVICE NUMBER 1-613-695-5550 UTG DIGITAL MEDIA 5450 Canotek Road, Unit 42A Ottawa, Ontario K1J 9G5 Tel: 613-695-5550 Fax: 613-695-2884 E-mail: info@utgdigitalmedia.com URL:

More information

Bar Code Reader Series BCL 20 A flexible reader for a variety of applications

Bar Code Reader Series BCL 20 A flexible reader for a variety of applications Bar Code Reader Series BCL 20 A flexible reader for a variety of applications PRODUCT INFORMATION The benchmark for flexibility. Laser scanners of the BCL 20 series as variable as your requirements demand.

More information

Optical Power Meter. Specification & User Manual

Optical Power Meter. Specification & User Manual Optical Power Meter Specification & User Manual Page 1 of 9 Copyright 2011 reserves the right to modify specifications without prior notice Table of Contents 1. Description and Features.......3 2. Specification......4

More information

Our smallest sensor. F 10 laser sensors in a subminiature design. Optical sensors Ultrasonic sensors Inductive sensors Capacitive sensors

Our smallest sensor. F 10 laser sensors in a subminiature design. Optical sensors Ultrasonic sensors Inductive sensors Capacitive sensors Our smallest sensor. F 10 laser sensors in a subminiature design. Optical sensors Ultrasonic sensors Inductive sensors Capacitive sensors Small but powerful. The smallest laser sensor with adjustable background

More information

Infrared Viewers. Manual

Infrared Viewers. Manual Infrared Viewers Manual Contents Introduction 3 How it works 3 IR viewer in comparison with a CCD camera 4 Visualization of infrared laser beam in mid-air 4 Power Density 5 Spectral sensitivity 6 Operation

More information

Electric Rotary Actuator - On/Off or programmable control actuator

Electric Rotary Actuator - On/Off or programmable control actuator Electric Rotary Actuator - On/Off or programmable control actuator Direct mounting on quarter-turn valves Manual override standard Corrosion resistant Adjustable limit switches Multi-voltage version Type

More information

AxioCam MR The All-round Camera for Biology, Medicine and Materials Analysis Digital Documentation in Microscopy

AxioCam MR The All-round Camera for Biology, Medicine and Materials Analysis Digital Documentation in Microscopy Microscopy from Carl Zeiss AxioCam MR The All-round Camera for Biology, Medicine and Materials Analysis Digital Documentation in Microscopy New Dimensions in Performance AxioCam MR from Carl Zeiss Both

More information

AP Physics B Ch. 23 and Ch. 24 Geometric Optics and Wave Nature of Light

AP Physics B Ch. 23 and Ch. 24 Geometric Optics and Wave Nature of Light AP Physics B Ch. 23 and Ch. 24 Geometric Optics and Wave Nature of Light Name: Period: Date: MULTIPLE CHOICE. Choose the one alternative that best completes the statement or answers the question. 1) Reflection,

More information

Research RF Sputtering Packages

Research RF Sputtering Packages Research RF Sputtering Packages Shown with 3" Polaris Adjustable Position Source with Tilt and Shutter 300 or 600 Watt Low Cost Packages for Those With Limited Budgets Desiring Full Capability 13.56 MHz

More information

Zero Width Glass Cutting with CO 2 Laser

Zero Width Glass Cutting with CO 2 Laser Zero Width Glass Cutting with CO 2 Laser Mohammed Naeem GSI Group, Laser Division Cosford Lane, Swift Valley Rugby mnaeem@gsig.com Introduction Laser cutting of glass in not a novel technique, excellent

More information

Scanner Set USER MANUAL

Scanner Set USER MANUAL Scanner Set USER MANUAL MODEL:PT-40K please read this manual carefully before your install the scanners! Thank you very much for choosing our product,if you have any question,please send email to me. Checking

More information

SALES SPECIFICATION. SC7640 Auto/Manual High Resolution Sputter Coater

SALES SPECIFICATION. SC7640 Auto/Manual High Resolution Sputter Coater SALES SPECIFICATION SC7640 Auto/Manual High Resolution Sputter Coater Document Number SS-SC7640 Issue 1 (01/02) Disclaimer The components and packages described in this document are mutually compatible

More information

Fiber Coupler Overview

Fiber Coupler Overview Fiber Coupler Overview Couplers High channel density Pitch Reducing Optical Fiber Array (PROFA) with or without spot-size reduction: Builds on proven spot-size converting (SSC) technology - highest spatial

More information

BMW CAR-PC MONITOR MODEL SPECIFICATION BMW3/5 SERIES. Model Name : BMW-100P Paper Version : Ver 1.0

BMW CAR-PC MONITOR MODEL SPECIFICATION BMW3/5 SERIES. Model Name : BMW-100P Paper Version : Ver 1.0 BMW CAR-PC MONITOR MODEL SPECIFICATION BMW3/5 SERIES Model Name : BMW-100P Paper Version : Ver 1.0 INDEX Precacution Specification System Composition Product Outline Connector Pin Assignment Installaion

More information

INSTRUCTION MANUAL for UNIBLITZ MODEL DM412 SHUTTER DRIVE MODULE

INSTRUCTION MANUAL for UNIBLITZ MODEL DM412 SHUTTER DRIVE MODULE INSTRUCTION MANUAL for UNIBLITZ MODEL DM412 SHUTTER DRIVE MODULE VINCENT ASSOCIATES 803 LINDEN AVE. ROCHESTER, NEW YORK 14625 SERVICE/ORDERS (800) 828-6972 In NY State (585) 385-5930 Fax (585) 385-6004

More information

Zeiss 780 Training Notes

Zeiss 780 Training Notes Zeiss 780 Training Notes 780 Start Up Sequence Do you need the argon laser, 458,488,514nm lines? No Turn on the Systems PC Switch Turn on Main Power Switch Yes Turn on the laser main power switch and turn

More information

Fiber Optics and Liquid Level Sensors Line Guide

Fiber Optics and Liquid Level Sensors Line Guide Fiber Optics and Liquid Level Sensors Line Guide Excellence, through every fiber. Honeywell Sensing and Control (S&C) offers fiber optic sensors manufactured with SERCOS (Serial Real-time Communication

More information

I STAR COMPUTER CO., LTD

I STAR COMPUTER CO., LTD I STAR COMPUTER CO., LTD Mini Redundant Power Supply 300W+300W for IPC-Computer Model No. TC-300R8 Table of content 1. Introduction...1 2. Specification 2.1 Input Voltage...1 2.2 DC Output...1 2.3 PS-ON

More information

Model SRMD Setra Remote Monitoring Display

Model SRMD Setra Remote Monitoring Display Model SRMD Setra Remote Monitoring Display 1.0 GENERAL INFORMATION Thank you for purchasing the Setra Remote Monitoring Display (SRMD). The SRMD is a digital panel meter with a bright 1 LED display for

More information

Argon-Ion Lasers. Argon Ion Lasers. for industrial and scientific applications. Sacher Lasertechnik GmbH Rudolf-Breitscheid-Str. 1-5 D-35037 Marburg

Argon-Ion Lasers. Argon Ion Lasers. for industrial and scientific applications. Sacher Lasertechnik GmbH Rudolf-Breitscheid-Str. 1-5 D-35037 Marburg Argon-Ion Lasers for industrial and scientific applications Sacher Lasertechnik GmbH Rudolf-Breitscheid-Str. 1-5 D-35037 Marburg Phone +49 (0) 6421 305-0 Fax +49 (0) 6421 305-299 Email contact@sacher-laser.com

More information

Long Distance Industrial Wireless Transmitters and Receivers

Long Distance Industrial Wireless Transmitters and Receivers Long Distance Industrial Wireless s and Receivers Up to 450 m (1500') Line of Sight Range UWXL Series U Thermocouple, RTD, Temperature, RH, ph, Process Voltage/ Current and Input Models U J, K, T, E, R,

More information

Using the NI 17xx Smart Camera Direct Drive Lighting Controller

Using the NI 17xx Smart Camera Direct Drive Lighting Controller Using the NI 17xx Smart Camera Direct Drive Lighting Controller Overview The use of proper lighting is often overlooked when designing a machine vision application. More robust and accurate inspections

More information

Universal Fibre Optics L E D L I G H T S O U R C E S

Universal Fibre Optics L E D L I G H T S O U R C E S Universal Fibre Optics L E D L I G H T S O U R C E S Go green with LED The UFO range of LED light sources use the latest technology to provide high light output combined with small unit size and very cool

More information

Technical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface

Technical data. General specifications. Indicators/operating means. Electrical specifications Operating voltage U B Power consumption P 0 Interface Release date: 06-0- 09: Date of issue: 06-0- 009_eng.xml Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service

More information

TATA INSTITUTE OF FUNDAMENTAL RESEARCH Homi Bhabha Road, Colaba, Mumbai 400 005. A Deemed University

TATA INSTITUTE OF FUNDAMENTAL RESEARCH Homi Bhabha Road, Colaba, Mumbai 400 005. A Deemed University Homi Bhabha Road, Colaba, Mumbai 400 005. A Deemed University Telephone : +91-22-2278 2890/2886/2887/2595 Email : sgk@tifr.res.in Website : www.tifr.res.in : sheela@tifr.res.in : madhuram@tifr.res.in PUBLIC

More information

LED...A70..4-..Q Series Sealed High-Intensity

LED...A70..4-..Q Series Sealed High-Intensity LED...A70..4-..Q Series Sealed High-Intensity Area Lights High-Power Lighting for use with PresencePLUS and Other Vision Systems Features Rugged, waterproof housing, rated IEC IP68 Compact area light for

More information

Amplified High Speed Fiber Photodetectors

Amplified High Speed Fiber Photodetectors Amplified High Speed Fiber Photodetectors User Guide (800)697-6782 sales@eotech.com www.eotech.com Page 1 of 7 EOT AMPLIFIED HIGH SPEED FIBER PHOTODETECTOR USER S GUIDE Thank you for purchasing your Amplified

More information

Alignment Laser System.

Alignment Laser System. - O T 6 0 0 0 Alignment Laser System. The OT-6000. Multi -Target,Two Dimensional Alignment. Introducing the most powerful way to measure alignment at distances up to 300 feet. The OT-6000 Alignment Laser

More information

High-Power Diode Laser Expertise

High-Power Diode Laser Expertise 1 2 3 High-Power Diode Laser Expertise DILAS, the diode laser company, manufactures high-power diode laser components and systems in a wide range of output powers and wavelengths including fiber-coupled,

More information

LT-82 Stationary IR Transmitter

LT-82 Stationary IR Transmitter LT-82 Stationary IR Transmitter Configuration LT-82-0 (North America) LT-82-02 (Asia, UK) LT-82-03 (Euro) The Listen LT-82 is the heart of a stationary IR listening system. It takes the desired audio signal

More information

Wavelength stabilized high-power diode laser modules

Wavelength stabilized high-power diode laser modules Wavelength stabilized high-power diode laser modules Bernd Köhler *, Thomas Brand, Matthias Haag, Jens Biesenbach DILAS Diodenlaser GmbH, Galileo-Galilei-Str. 10, 55129 Mainz-Hechtsheim, Germany ABSTRACT

More information

Analog Laser Diode Setup for Gray Scale Image Engraving

Analog Laser Diode Setup for Gray Scale Image Engraving Analog Laser Diode Setup for Gray Scale Image Engraving www.picengrave.com A special appreciation goes to Mr. Jeff Woodcock, and his son Jeffery, for their assistance and photos. ---------------------------------------------------------------This

More information

LG Air Conditioning Multi F(DX) Fault Codes Sheet. Multi Split Units

LG Air Conditioning Multi F(DX) Fault Codes Sheet. Multi Split Units Multi Split Units If there is a fault on any LG Multi unit, an Error mark is indicated on the display window of the indoor unit, wired-remote controller, and LED s of outdoor unit control board. A two

More information

Technical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5

Technical data. General specifications. Indicators/operating means. 30 Hz Multiplex operation 30 Hz / n, n = number of sensors, n 5 Model Number Single head system Features Parameterization interface for the application-specific adjustment of the sensor setting via the service program ULTRA 000 programmable switch outputs Hysteresis

More information

Throughbeam photoelectric sensors. Dimensioned drawing. Electrical connection

Throughbeam photoelectric sensors. Dimensioned drawing. Electrical connection Specifications and description Leuze electronic LS 78 Throughbeam photoelectric sensors Dimensioned drawing 180m 10-30 V DC! Voltage range from 12 30VDC with NPN, PNP and/or relay outputs! Light/dark switching!

More information

Tubular Analog model resolution: 0,5 mm (SLOW mode), 1 mm (FAST mode) Right angle Repeatibility: 0,7 mm Vdc

Tubular Analog model resolution: 0,5 mm (SLOW mode), 1 mm (FAST mode) Right angle Repeatibility: 0,7 mm Vdc Ultrasonic sensors for high precision detection of clear and transparent objects Clear object detection, inspection on transparent or highly reflective film and liquid level measurement Standard M18 tubular

More information

Laser Diode Gas Sensors

Laser Diode Gas Sensors Laser Diode Gas Sensors Photonic Sensors Swiss Laser Net Workshop Biel 17.09.09 Thomas Hessler Overview Leister and ist photonic activities TDLS detection principle TDLS product plattform Applications

More information

Basler. Line Scan Cameras

Basler. Line Scan Cameras Basler Line Scan Cameras High-quality line scan technology meets a cost-effective GigE interface Real color support in a compact housing size Shading correction compensates for difficult lighting conditions

More information

Acousto-optic modulator

Acousto-optic modulator 1 of 3 Acousto-optic modulator F An acousto-optic modulator (AOM), also called a Bragg cell, uses the acousto-optic effect to diffract and shift the frequency of light using sound waves (usually at radio-frequency).

More information

2/8.10.01. These vacuum switches are used in measuring ranges between -1 and 0 bar.

2/8.10.01. These vacuum switches are used in measuring ranges between -1 and 0 bar. CATALOGUE > Release 8.5 > Electronic vacuum switches Series SWM Electronic miniature vacuum switches Series SWM These vacuum switches are used in measuring ranges between -1 and 0 bar. Small dimension

More information

TRIMBLE TX5 3D LASER SCANNER QUICK START GUIDE

TRIMBLE TX5 3D LASER SCANNER QUICK START GUIDE TRIMBLE TX5 3D LASER SCANNER QUICK START GUIDE Equipment 1 8 9 5 6 7 4 3 2 The TX5 laser scanner ships with the following equipment: 1 Scanner transport and carry case 6 USB memory card reader 2 AC power

More information

ZEISS T-SCAN Automated / COMET Automated 3D Digitizing - Laserscanning / Fringe Projection Automated solutions for efficient 3D data capture

ZEISS T-SCAN Automated / COMET Automated 3D Digitizing - Laserscanning / Fringe Projection Automated solutions for efficient 3D data capture ZEISS T-SCAN Automated / COMET Automated 3D Digitizing - Laserscanning / Fringe Projection Automated solutions for efficient 3D data capture ZEISS 3D Digitizing Automated solutions for efficient 3D data

More information

EV-1000 Series DVR. Quick Operation Guide. Version 1.0.0

EV-1000 Series DVR. Quick Operation Guide. Version 1.0.0 EV-1000 Series DVR Quick Operation Guide Version 1.0.0 Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable to

More information

VE02AL / VE05AL / VE02ALR VGA & Stereo Audio CAT5 Extender with Chainable Output

VE02AL / VE05AL / VE02ALR VGA & Stereo Audio CAT5 Extender with Chainable Output VE02AL / VE05AL / VE02ALR VGA & Stereo Audio CAT5 Extender with Chainable Output Introduction: VE02AL, VE05AL is designed for VGA +Stereo Audio signal over cost effective CAT5 cable to instead of VGA and

More information

M-D,T,Q-series BroadLighter. Benchtop Broadband Light Source with Extended Bandwidth. Technical Product Specification

M-D,T,Q-series BroadLighter. Benchtop Broadband Light Source with Extended Bandwidth. Technical Product Specification M-D,T,Q-series BroadLighter. Benchtop Broadband Light Source with Extended Bandwidth. Technical Product Specification Document ID: SL.RD.04.002.150723 July 2015 Revision: 001 ATTENTION ELECTROSTATIC SENSITIVE

More information

SD Rack. DiGiCo SD Rack. User Manual B - August 2013 1-1

SD Rack. DiGiCo SD Rack. User Manual B - August 2013 1-1 DiGiCo SD Rack User Manual B - August 2013 1-1 Contents 1.1 Introduction......1-4 1.1.1 SD-Rack Unit and Modules, Installation Notes......1-4 1.2 SD Rack Power......1-6 1.3 SD Rack Clocking......1-6 1.4

More information

Katharina Lückerath (AG Dr. Martin Zörnig) adapted from Dr. Jörg Hildmann BD Biosciences,Customer Service

Katharina Lückerath (AG Dr. Martin Zörnig) adapted from Dr. Jörg Hildmann BD Biosciences,Customer Service Introduction into Flow Cytometry Katharina Lückerath (AG Dr. Martin Zörnig) adapted from Dr. Jörg Hildmann BD Biosciences,Customer Service How does a FACS look like? FACSCalibur FACScan What is Flow Cytometry?

More information

MADP-000504-10720T. Non Magnetic MELF PIN Diode

MADP-000504-10720T. Non Magnetic MELF PIN Diode MADP-54-172T Features High Power Handling Low Loss / Low Distortion Leadless Low Inductance MELF Package Non-Magnetic Surface Mountable RoHS Compliant MSL 1 Package Style 172 Dot Denotes Cathode Description

More information

ENCODER TEST MODULE APPLICATION GUIDE

ENCODER TEST MODULE APPLICATION GUIDE ENCODER TEST MODULE APPLICATION GUIDE MODEL NUMBER: EM-DR1-ET-5-TB-4469-24V PART NUMBER: 924-60002-001 7230 Hollister Avenue, Goleta, CA 93117-2891 Phone: (800)362-6337 or (800)938-0782 Fax: (800)960-2726

More information