12.10 am Enis Kapuano Radarchim S.p.A., Italy A glass company producing soda or a soda company producing glass? The case of Sisecam.

Transcription

1

2 Thursday, November 15, 2012 HOLLOW & FLAT GLASS SESSION: INNOVATIONS IN RAW MATERIALS am WELCOMING ADDRESS PRESENTATION OF THE CONFERENCE Gino Ferretti Rector of the University of Parma, Italy Rinaldo Garziera Head of the Department of Industrial Engineering University of Parma, Italy Alessandro Bandini A.T.I.V. President, Italy Gianni Royer Carfagni A.T.I.V. Vice President, University of Parma, Italy am JAMES O'CALLAGHAN Eckersley O'Callaghan, United Kingdom ADVENTURES WITH STRUCTURAL GLASS CHAIRMAN: Nicola Favaro Stazione Sperimentale del Vetro, Italy am 1 Peter Sheppardson, 1 Isaac Berwouts, 1 Sam Leese, 2 Stéphane Leroux 1 Sibelco Europe - 2 Paté Green Solutions Observations on glass raw material quality, chemistry and mineralogy, their contribution to consistency of glass manufacture and implications on energy required for glass melting am 1 Claudio Ferrero, 1 Carlo Baglietto, 2 Lodovico Ramon 1 Gruppo Minerali - Maffei S.p.A, 2 SASIL S.p.A., Italy The lowest Fe 2 O 3 content sands in the market for higher quality glasses production am Enis Kapuano Radarchim S.p.A., Italy A glass company producing soda or a soda company producing glass? The case of Sisecam am 1 Pierluigi Cassaghi, 2 Stefano Brivio, 2 Alessandro Barone, 3 Jean-Pascal Balland, 3 Marc Thijssen 1 Solvay, France 2 Solvay, Italy 3 Solvay, Belgium Flue gas treatment with Sodium Bicarbonate in the framework of glass BREF 1.00 pm Lunch CHAIRMAN: Ruud Beerkens CelSian Glass & Solar, The Netherlands 2.30 pm Juergen Lenger, Christian Makari Binder Co, Austria Glass cullet processing - Outstanding technology used in modern glass recycling plants 2.55 pm 1 Nicola Favaro, 2 Massimiliano Avella 1 Stazione Sperimentale del Vetro, 2 CO.RE.VE. Italy Assessment of environmental benefits by the use of glass cullet and glassy sand. Energy saving and CO2 emission reduction 3.20 pm Roberto Falcone, Nicola Favaro, Sebastiano Barberini Stazione Sperimentale del Vetro, Italy Chemical and physical characterization of glass cullet and glass sand used in the production of glass containers 3.45 pm Massimiliano Avella CO.RE.VE, Italy Glass collection and recycling in Italy 4.10 pm Coffee Break 8.00 pm Social Dinner

3 Friday, November 16, 2012 HOLLOW & FLAT GLASS SESSION: INNOVATIONS IN RAW MATERIALS 9.15 am BONIFACIO PISTACCHIO Consultant - Former NSG Group Senior Executive, Italy COMPETITIVENESS IN THE GLASS INDUSTRY ENERGY AND WASTE MANAGEMENT (AN ANSWER TO THE CONTINUOUS COST PUSHING) CHAIRMAN: Angelo Montenero University of Parma, Italy am Alberto Biavati Bormioli Rocco S.p.A., Italy Glass working range and the variation of the dolomite Ca/Mg ratio: a case history am Penny Marson, Ruud Beerkens, Mathi Rongen CelSian Glass and Solar, The Netherlands Evolved gas analysis and observation of melting & fining processes am Coffee Break am Erik Muijsenberg, Jiri Ullrich Glass Service Inc., Czech Republic Visualising of melting sand grains and redox measurements assist in optimization of batch composition am Francesco Di Sarno Det Norske Veritas Italia Srl, Italy The contribution of business management systems to anticipate and meet mandatory regulations: the case end-of-waste am Roberto Falcone, Sandro Hreglich, Bruno Profilo Stazione Sperimentale del Vetro, Italy Substitution of arsenic oxide in the production of coloured artistic glass am Lunch The simultaneous translation Italian - English Italian will be provided only for the Hollow & Flat Glass Session: Innovations in Raw Materials

4 Thursday, November 15, 2012 ENGINEERING & ARCHITECTURAL SESSION: SPECIAL GLASS STRUCTURES am WELCOMING ADDRESS PRESENTATION OF THE CONFERENCE Gino Ferretti Rector of the University of Parma, Italy Rinaldo Garziera Head of the Department of Industrial Engineering University of Parma, Italy Alessandro Bandini A.T.I.V. President, Italy Gianni Royer Carfagni A.T.I.V. Vice President, University of Parma, Italy am JAMES O'CALLAGHAN Eckersley O'Callaghan, United Kingdom ADVENTURES WITH STRUCTURAL GLASS CHAIRMAN: JAN BELIS - Ghent University, Belgium am Styliani Lefaki Aristotle University of Thessaloniki, School of Architecture, Greece Glass Mannerism and transparency issues am Benedetta Marradi University of Pisa, Department of Civil Engineering, Italy The use of glass in restorations: recent developments in architecture and building technology am Ugo Carughi Soprintendenza per i Beni Architettonici Paesaggistici, Storici, Artistici ed Etnoantropologici di Napoli e Provincia, Italy Restoration and arrangement of St. Aniello at Caponapoli church Naples 1.00 pm Lunch CHAIRMAN: CHRISTIAN LOUTER - Ecole Polytechnique Fédérale De Lausanne, Switzerland 2.30 pm Michel Palumbo, Dominque Palumbo, Teresa Mazzucchelli Vetrostrutturale Srl, Italy A new hybrid solution for structural glass reinforced beams 2.55 pm Ennio Mognato, Alessandra Barbieri, Matteo Schiavonato Stazione Sperimentale del Vetro, Italy Chemically-strengthened glass: used in building applications 3.20 pm 1 Alessandro Bandini, 2 Luca Collini, 2 Gianni Royer Carfagni 1 Colorobbia S.p.A., 2 Department of Industrial Engineering, University of Parma, Italy Statistical characterization of the mechanical properties of glass ceramics for structural applications. Part I: constant load rate 3.45 pm Coffee Break 4.15 pm 1 Luigi Biolzi, 2 Emanuele Cagnacci, 2 Maurizio Orlando, 2 Lorenzo Ruggero Piscitelli 1 Politecnico di Milano, Italy, 2 Department of Engineering, University of Florence, Italy Laminated glass specimens under long-term push-out loads 4.40 pm 1 Ennio Mognato, 1 Alessandra Barbieri, 2 Piero Quaia, 3 Danijel Hatezic 1 Stazione Sperimentale del Vetro, 2 Permasteelisa Group, Italy, 3 Formator Safety Glass.d.o.o., Croatia Compatibility tests on laminated glass panes with other materials 8.00 pm Social Dinner

5 Friday, November 16, 2012 ENGINEERING & ARCHITECTURAL SESSION: SPECIAL GLASS STRUCTURES 9.15 am BONIFACIO PISTACCHIO Consultant - Former NSG Group Senior Executive, Italy COMPETITIVENESS IN THE GLASS INDUSTRY ENERGY AND WASTE MANAGEMENT (AN ANSWER TO THE CONTINUOUS COST PUSHING) CHAIRMAN: Jens Schneider Darmstadt University, Germany am Claudio Amadio, Chiara Bedon Department of Civil Engineering and Architecture, University of Trieste, Italy Standardized buckling curves for the verification of glass columns, beams and panels am Michal Netusil, Martina Eliasova Faculty of Civil Engineering, Department of Steel and Timber Structures, Czech Technical University in Prague, Czech Republic Experimental comparison of different types of glass composite beams am Coffee Break am Emanuela Speranzini, Stefano Agnetti Department of Civil and Environmental Engineering, University of Perugia, Italy Experimental performance of glass beams am 1 Luigi Biolzi, 2 Maurizio Orlando, 2 Lorenzo Ruggero Piscitelli 1 Politecnico di Milano, Italy - 2 Department of Engineering, University of Florence, Italy Flexural-torsional buckling tests on laminated glass beams am Gianni Royer Carfagni Department of Industrial Engineering, University of Parma, Italy The new CNR-DT210. Towards an Italian code for structural glass am Lunch CHAIRMAN: Gianni Royer Carfagni University of Parma, Italy 2.30 pm Horst Goebel Bridgestone Industrial Limited, Germany Laminated Safety Glass using densely cross-linking EVA-based interlayer - Load-bearing capability 2.55 pm Maurizio Froli, Leonardo Lani Department of Civil Engineering, Structural Division, University of Pisa, Italy Compression shear test of laminated safety glass: comparison between two kinds of pvb 3.20 pm 1 Laura Galuppi, 2 Giampiero Manara, 1 Gianni Royer Carfagni 1 Department of Industrial Engineering, University of Parma, Italy 2 Permasteelisa Group, Italy Enhanced effective thickness method for laminated glass. A case study

6 XXVII A.T.I.V. CONFERENCE REGISTRATION INFORMATION Registration Fees Speakers/Participants A.T.I.V. Members Non A.T.I.V. Members Social Dinner Early due payment by: October 19, ,00 290,00 Later payment after: October 19, ,00 390,00 The A.T.I.V. Members Non A.T.I.V. members fee include: Admission to all technical sessions, conference proceedings, Coffee breaks and lunch. Cancellation conditions Prepaid registration fees are refundable, minus a 20% administration fee, if written notification is received before October 31, Payments By credit card: CartaSi, VISA and Master Card By money transfer to the account N belonging to A.T.I.V. c/o Cassa di Risparmio di Parma e Piacenza Crèdit Agricole- Agenzia 14 Via Langhirano 65 - Parma (ABI CAB CIN M IBAN IT 47M ) indicating XXVII A.T.I.V. Conference and specifying the name/s of the participant/s. Please Note: for the international money transfers the bank commissions must be charged to the orderer. At the registration desk (cash, checks, credit cards - CartaSi,Visa and Mastercard accepted). Suggested Hotels Hotel Palace Maria Luigia **** Parma Phone reservationsml@sinahotels.com Hotel Astoria *** Parma Phone Info@astoriaresidencehotel.com Hotel Tre Pozzi **** Sanguinaro/Fidenza Phone info@hoteltrepozzi.it Hotel Campus My Hotels *** Collecchio Phone Single Double Room Room 108,00 167,00 76,00 76,00 65,00 90,00 54,00 69,00 info@hotelcampus.com When booking, Convenzione Universitaria should be mentioned in order to obtain the special rates agreed for Conference delegates. Surname REGISTRATION FORM Complete and of fax this form to: ativ@ativ-online.it Fax First Name(s) Company, Institution etc Street, PO Box Postal Code Country Phone Fax Registration Fees Speakers Participants A.T.I.V. Members Non A.T.I.V. Members Social Dinner I plan to attend: City Early due payment by: October ,00 290,00 Hollow & Flat Glass Session Title Later payment after: October ,00 390,00 Engineering & Architectural Session Method of Payment: Credit Card (CartaSi, Visa, Mastercard) Card n Exp.date CV2 Amount Name of card holder Signature Bank Money transfer (please enclose copy of the payment receipt free of bank commission). Account N A.T.I.V. c/o Cassa di Risparmio di Parma e Piacenza Crèdit Agricole ABI CAB CIN M - IBAN: IT47M BIC: CRPPIT2P482 Specifying XXVII A.T.I.V. Conference and the name/s of the participant/s. At the registration desk (cash, checks, credit cards - CartaSi, Visa, Mastercard) With reference to Italian law nr. 675/96 we inform you that your personal data will be treated only for conference purposes. We also inform you that the personal data listed above will be included in the list of the participants of this conference. If you DO NOT want to be included in this list, please thick the square and sign. Thank you. DO NOT include my data in the list of the participants Date Signature