Flexible Mehrlagen-Schaltungen in Dünnschichttechnik:
|
|
- Isabella Wright
- 7 years ago
- Views:
Transcription
1 Flexible Mehrlagen-Schaltungen in Dünnschichttechnik: Technologie-Plattform für Intelligente Implantate A. Kaiser, S. Löffler, K. Rueß, P. Matej, C. Herbort, B. Holl, G. Bauböck Cicor Advanced Microelectronics & Substrates Session: Intelligente Implantate MicroTec Südwest Clusterkonferenz 2014, Freiburg MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 1
2 Solutions I I 2
3 Medical Devices Some Needed Properties Materials Form factor (SizeWeightandPower) Mechanical Passive Electrical Medical Device Active Implant Diagnostic Instrument BioCompatible BioStable Active Electrical Interface BioChemical MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 3
4 Materials Flexible Substrate materials for Thin Film Circuits Material Type Thickness ranges Max Temp [ C] Comments Liquid Polyimide Polyimide 3-7 µm 350 C Liquid; Spin- On Polyimide Foil Polyimide 12.5 µm + higher ~ 360 C 1 Solid; Foil material LCP Foil Liquid Crystalline Polymer 25 µm + higher < 300 C Solid; Foil material Liquid Silicone PDMS 30 µm + higher 200 C Liquid; Spinon 1 depending on type of Material MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 4
5 Materials Typical Metal Systems in Thin Film Flex Metal Typical Use Thickness ranges Deposition Method TiW Adhesion Layer nm PVD Pd Ni Barrier Layer 50 nm 300 nm 1 µm 5 µm PVD electroplating Cu Conductor 200 nm 300 µm PVD and/or electroplating Ti Adhesion Layer 50 nm 200 nm PVD Au Conductor 200 nm 40 µm PVD or electroplating Pt Electrode 200 nm 1 µm PVD or electroplating PVD = Physical Vapor Deposition MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 5
6 Form Factor Some Examples SWaP Form factor (SWaP) Form factor (SizeWeightandPower) MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 6
7 Thin Film Flexible Multi Layer Circuits Manufacturing Using Liqid Polyimide MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 7
8 Application Catheter for optical examinations in the heart MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 8
9 Thin Film Flexible Multi Layer: Build-Up using Liquid Polyimide Fabrication Steps via open window polyimide 3 metal 3 polyimde 2 metal 2 polyimide 1 metal 1 polyimide 0 substrate (temporary carrier) see also: A. Kaiser, et. al., "Technology for Medical Human Implants: Vision Chip on Thin Film Multilayer", Proceedings of the 2008 IMAPS Conference (IMAPS 2008), Providence, Rhode Island, USA, November 2-6, 2008 MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 9
10 Thin Film Flexible Multi Layer: Build-Up using Liquid Polyimide via open metal areas transparent circuit areas MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 10
11 Assembly on Flexible Multi Layer MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 11
12 Thin Film Flexible Multi Layer Circuits Manufacturing Using Flexible Foil MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 12
13 Thin Film Flexible Circuits Construction with Flexible Foils Process Flow functional area (e.g. Pt) metal flexible base (PI- or LCP-type) via metal MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 13
14 Mechanical Function Life time examination Mechanical Mechanical MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 14
15 Reliability Testing: Bending Test Polyimide Foils Results 100HN sample a+b: R0 = 30,82Ω Pyralux AP sample a: R0 = 30,32Ω Pyralux AP sample b: R0=30,26 Ω NO Change after 63k cycles 0 position: Au lines substrate 180 position: MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 15
16 Reliability Testing: Bending Test LCP Foils Results LCP 25µm sample a: R0 = 30,69Ω LCP 25µm sample b: R0 = 30,36Ω LCP 50µm sample a: R0 = 29,27Ω NO Change after 63k cycles LCP 50µm sample a: R0 = 29,15Ω MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 16
17 Bending Test under Current Load: LCP material 25µm and 50µm 200 ma: ~35 ka/cm² 25 µm base material I Load = 200mA 50 µm base material I Load = 200mA NO Change after 80k cycles 25 µm base material I Load = 100mA 50 µm base material I Load = 100mA cycles MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 17
18 Electrical Function Passive and Active, Added Functionality Electrical Electrical MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 18
19 Assembly Adding Functionality MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 19
20 Placement of Chips and Actuators View from Back Side IC surface Underfill Solder joints MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 20
21 Testing, Rolling, and Catheter Build Customer s Job MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 21
22 Interface Connecting with other Worlds System Approach Interface Interface MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 22
23 System Approach Combination of Different Technologies MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 23
24 Migration from Thin Film to PCB Use of synergies and efficient manufacturing Heart Catheter Circuit MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 24
25 Summary and Conclusion CICOR provides solutions for various kind of medical applications on flexible circuits has the technology to use biocompatible materials only can also provide assembly on flexible circuits serves as your development and production partner for sophisticated medical circuits MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 25
26 CICOR Future Perspectives Healthy Man Available at CICOR AMS Available at CICOR AMS Available at CICOR ES Available at CICOR AMS Possible at CICOR AMS Available at CICOR AMS Possible at CICOR AMS and this is not the End! MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 26
27 Thank You! Cicor Advanced Microelectronics & Substrates Reinhardt Microtech GmbH Dr.-Ing. Alexander Kaiser Sedanstrasse Ulm / Germany Alexander.Kaiser@cicor.com Phone: MicroTec Südwest Clusterkonferenz 2014, Freiburg I I 27
San Francisco Circuits, Inc.
Your Doorway to Innovation San Francisco Circuits, Inc. Bridging Concepts with Reality Flex PCB Introduction to Flex Circuits What is Flex Circuits? From Wikipedia - a technology for assembling electronic
More informationMiniaturizing Flexible Circuits for use in Medical Electronics. Nate Kreutter 3M
Miniaturizing Flexible Circuits for use in Medical Electronics Nate Kreutter 3M Drivers for Medical Miniaturization Market Drivers for Increased use of Medical Electronics Aging Population Early Detection
More informationMedical technology Innovation for success Customized solutions in medical technology
Medical technology Innovation for success Customized solutions in medical technology Innovation for success The challenges in medical technology The purpose of medical technology is, in particular, to
More informationMicrostockage d énergie Les dernières avancées. S. Martin (CEA-LITEN / LCMS Grenoble)
Microstockage d énergie Les dernières avancées S. Martin (CEA-LITEN / LCMS Grenoble) 1 Outline What is a microbattery? Microbatteries developped at CEA Description Performances Integration and Demonstrations
More informationDevelopment of Biocompatible Coatings on Flexible Electronics
Development of Biocompatible Coatings on Flexible Electronics Rabindra N. Das, Frank D. Egitto, Mark Poliks Endicott Interconnect Technologies, Inc., 1093 Clark Street, Endicott, New York, 13760. Telephone
More informationGood Boards = Results
Section 2: Printed Circuit Board Fabrication & Solderability Good Boards = Results Board fabrication is one aspect of the electronics production industry that SMT assembly engineers often know little about.
More informationFaszination Licht. Entwicklungstrends im LED Packaging. Dr. Rafael Jordan Business Development Team. Dr. Rafael Jordan, Business Development Team
Faszination Licht Entwicklungstrends im LED Packaging Dr. Rafael Jordan Business Development Team Agenda Introduction Hermetic Packaging Large Panel Packaging Failure Analysis Agenda Introduction Hermetic
More informationSmart Wearable Devices Innovation for success Sophisticated solutions in the area of wearable electronics
Smart Wearable Devices Innovation for success Sophisticated solutions in the area of wearable electronics Innovation for success The world of wearable electronics Wearable electronic devices smartwatches,
More informationFlexible Solutions. Hubert Haidinger Director PE/CAM BU Industrial & Automotive 5.June 2013. www.ats.net
Flexible Solutions Hubert Haidinger Director PE/CAM BU Industrial & Automotive 5.June 2013 www.ats.net Austria Technologie & Systemtechnik Aktiengesellschaft Fabriksgasse13 A-8700 Leoben Tel +43 (0) 3842
More informationDesmear and Plating Through Hole Considerations and Experiences for Green PCB Production
Desmear and Plating Through Hole Considerations and Experiences for Green PCB Production Gerd Linka, (Neil Patton) Atotech Deutschland GmbH Berlin, Germany Abstract With the latest legislations from RoHS
More informationHDI. HDI = High Density Interconnect. Kenneth Jonsson Bo Andersson. NCAB Group
HDI HDI = High Density Interconnect Kenneth Jonsson Bo Andersson NCAB Group Definitions / Standards (IPC) Pros & Cons Key equipment Build-ups Choice of material Design rules IPC HDI reliability (µvia stacked
More informationElectroplating with Photoresist Masks
Electroplating with Photoresist Masks Revised: 2014-01-17 Source: www.microchemicals.com/downloads/application_notes.html Electroplating - Basic Requirements on the Photoresist Electroplating with photoresist
More informationOPTOELECTRONICS PACKAGING FOR EFFICIENT CHIP-TO-WAVEGUIDE COUPLING
OPTOELECTRONICS PACKAGING FOR EFFICIENT CHIP-TO-WAVEGUIDE COUPLING G. VAN STEENBERGE, E. BOSMAN, J. MISSINNE, B. VAN HOE, K.S. KAUR, S. KALATHIMEKKAD, N. TEIGELL BENEITEZ, A. ELMOGI CONTACT GEERT.VANSTEENBERGE@ELIS.UGENT.BE
More informationCoating Thickness and Composition Analysis by Micro-EDXRF
Application Note: XRF Coating Thickness and Composition Analysis by Micro-EDXRF www.edax.com Coating Thickness and Composition Analysis by Micro-EDXRF Introduction: The use of coatings in the modern manufacturing
More informationWhite Paper. Recommendations for Installing Flash LEDs on Flex Circuits. By Shereen Lim. Abstract. What is a Flex Circuit?
Recommendations for Installing Flash LEDs on Circuits By Shereen Lim White Paper Abstract For the mobile market some PCB assemblies have been converted to flex circuit assemblies, in part because flex
More informationAnti-Counterfeit, Miniaturized, and Advanced Electronic Substrates for Medical Device Applications
Anti-Counterfeit, Miniaturized, and Advanced Electronic Substrates for Medical Device Applications Rabindra N. Das, Frank D. Egitto, and How Lin Endicott Interconnect Technologies, Inc., 1093 Clark Street,
More informationNeal O Hara. Business Development Manager
Neal O Hara Business Development Manager PCS OFFERING User Interface Flex Circuit Solutions Sensor Systems Multilayer Copper Flex Circuits LED Lighting 2 VERTICAL INTEGRATION FPC Connector Picoflex on
More information8-bit Atmel Microcontrollers. Application Note. Atmel AVR211: Wafer Level Chip Scale Packages
Atmel AVR211: Wafer Level Chip Scale Packages Features Allows integration using the smallest possible form factor Packaged devices are practically the same size as the die Small footprint and package height
More informationMake up Epoxy adhesive
Epoflex Base Materials series of MSC Polymer AG offers flexible base materials from simple single side flexible boards, flex-rigid applications up to highly complex multilayer boards. The dielectric is
More informationFraunhofer IZM Berlin
Fraunhofer IZM Berlin Advanced Packaging for High Power VCSEL Arrays Rafael Jordan, Lena Goullon, Constanze Weber, Hermann Oppermann Dr. Rafael Jordan, SIIT Fraunhofer IZM Berlin Advanced Packaging for
More informationBasic Designs Of Flex-Rigid Printed Circuit Boards
PCBFABRICATION Basic Designs Of Flex-Rigid Printed Circuit Boards Flex-rigid boards allow integrated interconnection between several rigid boards. This technology helps to reduce the number of soldered
More informationThermal Load Boards Improve Product Development Process
Thermal Load Boards Improve Product Development Process Bernie Siegal Thermal Engineering Associates, Inc. 2915 Copper Road Santa Clara, CA 95051 USA P: 650-961-5900 F: 650-227-3814 E: bsiegal@thermengr.com
More informationAcoustic/Electronic stack design, interconnect, and assembly Techniques available and under development
Acoustic/Electronic stack design, interconnect, and assembly Techniques available and under development - supported by the European Commission under support-no. IST-026461 e-cubes Maaike M. V. Taklo :
More informationECP Embedded Component Packaging Technology
ECP Embedded Component Packaging Technology A.Kriechbaum, H.Stahr, M.Biribauer, N.Haslebner, M.Morianz AT&S Austria Technologie und Systemtechnik AG Abstract The packaging market has undergone tremendous
More informationRedefining the Cost/Performance Curve for Rigid Flex Circuits
Presented at IPC Expo 99 Redefining the Cost/Performance Curve for Flex Circuits James Keating, Robert Larmouth and Greg Bartlett Teledyne Electronic Technologies 110 Lowell Road Hudson, NH 03051 Phone:
More informationUltra-high Barrier Plastic. MSE5420 Flexible Electronics Martin Yan, GE Global Research
Ultra-high Barrier Plastic MSE5420 Flexible Electronics Martin Yan, GE Global Research Outline Introduction to plastic substrate and need for barrier Barrier technologies WVTR measurement technologies
More informationResults Overview Wafer Edge Film Removal using Laser
Results Overview Wafer Edge Film Removal using Laser LEC- 300: Laser Edge Cleaning Process Apex Beam Top Beam Exhaust Flow Top Beam Scanning Top & Top Bevel Apex Beam Scanning Top Bevel, Apex, & Bo+om
More informationUse of Carbon Nanoparticles for the Flexible Circuits Industry
Use of Carbon Nanoparticles for the Flexible Circuits Industry Ying (Judy) Ding, Rich Retallick MacDermid, Inc. Waterbury, Connecticut Abstract FPC (Flexible Printed Circuit) has been growing tremendously
More informationSafety Certification for Lead Free Flexible and Rigid-Flex PCBs
Safety Certification for Lead Free Flexible and Rigid-Flex PCBs Crystal Vanderpan Underwriters Laboratories Inc. March 27, 2007 Crystal Vanderpan Principal Engineer for Printed Circuit Technologies Joined
More informationRigid-Flex Technology: Mainstream Use but More Complex Designs by John Isaac October 1, 2007
Rigid-Flex Technology: Mainstream Use but More Complex Designs by John Isaac October 1, 2007 In the past, flex and rigid-flex technology was typically used in applications that could tolerate long design
More informationTable of Contents. Flex Single-Side Circuit Construction. Rigid Flex Examples. Flex Double-Side Circuit Construction.
Table of Contents Flex Single-Side Circuit Construction Flex Double-Side Circuit Construction Multilayer Flex Circuit Construction Rigid Flex Examples IPC Information Glossary Rigid-Flex Construction Base
More informationRogers 3003, 3006, 3010, 3035, 3203, 3206, 3210
Stocked Materials: RIGID STANDARD FR4 High Tg 170c Black FR4 Polyclad 370HR (Lead Free) HIGH RELIABILITY Polyimide (Arlon 85N, Isola P96) BT (G200) HIGH FREQUENCY: Park Nelco 4000-13, 4000-13si Getek Gore
More informationInvestigation of Components Attachment onto Low Temperature Flex Circuit
Investigation of Components Attachment onto Low Temperature Flex Circuit July 2013 Q. Chu, N. Ghalib, H. Ly Agenda Introduction to MIRA Initiative MIRA Manufacturing Platforms Areas of Development Multiphase
More informationPower Dissipation Considerations in High Precision Vishay Sfernice Thin Film Chips Resistors and Arrays (P, PRA etc.) (High Temperature Applications)
VISHAY SFERNICE Resistive Products Application Note ABSTRACT On our thin film chips resistors and arrays the main path for the heat, more than 90 %, is conduction through the body of the component, the
More informationENIG with Ductile Electroless Nickel for Flex Circuit Applications
ENIG with Ductile Electroless Nickel for Flex Circuit Applications Yukinori Oda, Tsuyoshi Maeda, Chika Kawai, Masayuki Kiso, Shigeo Hashimoto C.Uyemura & Co., Ltd. George Milad and Donald Gudeczauskas
More informationFlexible Circuit Design Guide
Flexible Circuit Design Guide Benefits of Flexible Circuitry A solution to a packaging problem Placement around edges and folds Ability to be used in 3 axes connections Reduce assembly costs Very little
More informationT H A N K S F O R A T T E N D I N G OUR. FLEX-RIGID PCBs. Presented by: Nechan Naicker
T H A N K S F O R A T T E N D I N G OUR TECHNICAL WEBINAR SERIES FLEX-RIGID PCBs Presented by: Nechan Naicker We don t just sell PCBs. We sell sleep. Cirtech EDA is the exclusive SA representative of the
More informationIntroduction to VLSI Fabrication Technologies. Emanuele Baravelli
Introduction to VLSI Fabrication Technologies Emanuele Baravelli 27/09/2005 Organization Materials Used in VLSI Fabrication VLSI Fabrication Technologies Overview of Fabrication Methods Device simulation
More informationLab-on-a-Chip Design + Foundry Service
Lab-on-a-Chip Design + Foundry Service Visions to Products Assay Integration Automation and miniaturization of biochemical assays The Lab-on-a-Chip Design + Foundry-Service offers a shortcut to lab-on-a-chip
More informationMicrostockage d énergie Les dernières avancées. S. Martin (CEA-LITEN / Grenoble)
Microstockage d énergie Les dernières avancées S. Martin (CEA-LITEN / Grenoble) 1 Outline What is a microbattery? Microbatteries developped at CEA Description Performances Integration and Demonstrations
More informationOptical Properties of Sputtered Tantalum Nitride Films Determined by Spectroscopic Ellipsometry
Optical Properties of Sputtered Tantalum Nitride Films Determined by Spectroscopic Ellipsometry Thomas Waechtler a, Bernd Gruska b, Sven Zimmermann a, Stefan E. Schulz a, Thomas Gessner a a Chemnitz University
More informationElectroless Nickel / Immersion Gold Process Technology for Improved Ductility of Flex and Rigid-Flex Applications
M44.44kk-growth Electroless Nickel / Immersion Gold Process Technology for Improved Ductility of Flex and Rigid-Flex Applications By: Kuldip Johal and Hugh Roberts - Atotech USA Inc. Sven Lamprecht and
More informationMicrosystem technology and printed circuit board technology. competition and chance for Europe
Microsystem technology and printed circuit board technology competition and chance for Europe Prof. Udo Bechtloff, KSG Leiterplatten GmbH 1 Content KSG a continuously growing company PCB based Microsystems
More informationFlexible Circuit Simple Design Guide
Flexible Circuit Simple Design Guide INDEX Flexible Circuit Board Types and Definitions Design Guides and Rules Process Flow Raw Material Single Side Flexible PCB Single Side Flexible PCB (Cover layer
More informationThermal Management Solutions for Printed Circuit Boards used in Digital and RF Power Electronics and LED assemblies
Thermal Management Solutions for Printed Circuit Boards used in Digital and RF Power Electronics and LED assemblies Sandy Kumar, Ph.D. Director of Technology American Standard Circuits, Inc 3615 Wolf Road
More informationType RP73 Series. SMD High Power Precision Resistors. Key Features. Applications. Characteristics - Electrical - RP73 Series - Standard
Key Features n High precision - tolerances down to 0.05% n Low TCR - down to 5ppm/ C n Stable high frequency performance n Operating temperature -55 C to +155 C n Increased power rating - up to 1.0W n
More informationSpecialized expertise for miniaturized printed circuit boards
Specialized expertise for miniaturized printed circuit boards Medical Aerospace Industry 2-layer rigid-flex PCB, 30 µm structures, for industry Miniaturized substrates to meet the most stringent demands
More informationPackage Trends for Mobile Device
Package Trends for Mobile Device On-package EMI Shield At CTEA Symposium Feb-10, 2015 Tatsuya Kawamura Marketing, Director TEL NEXX, Inc. Love Thinner Mobile? http://www.apple.com/ iphone is registered
More informationN&H Technology GmbH. Silicone Rubber Keypad. Single Source Supply. Design Guide - Short Version. Engineering in Germany - Production in East Asia
N&H Technology GmbH Import & Export of Industrial Products Technical Support and Engineering Business Consulting and Representation Silicone Rubber Keypad Design Guide - Short Version Single Source Supply
More informationUsing Flex in High-Speed Applications
feature Figure 1: An automotive flex circuit designed to fit into a tight form factor. Using Flex in High-Speed Applications by Glenn Oliver DuPont Electronics and Communications Copper clad circuits in
More informationSoldering of SMD Film Capacitors in Practical Lead Free Processes
Soldering of SMD Film Capacitors in Practical Lead Free Processes Matti Niskala Product Manager, SMD products Evox Rifa Group Oyj, a Kemet Company Lars Sonckin kaari 16, 02600 Espoo, Finland Tel: + 358
More informationRapid Prototyping and Development of Microfluidic and BioMEMS Devices
Rapid Prototyping and Development of Microfluidic and BioMEMS Devices J. Sasserath and D. Fries Intelligent Micro Patterning System Solutions, LLC St. Petersburg, Florida (T) 727-522-0334 (F) 727-522-3896
More information0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors.
0.3 mm Contact Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors. FH Series (51pos. type) 3.45mm 17.1mm 0.9mm Features 1. Extremely light weight The largest version, with all contacts
More informationPrinted Circuits. Danilo Manstretta. microlab.unipv.it/ danilo.manstretta@unipv.it. AA 2012/2013 Lezioni di Tecnologie e Materiali per l Elettronica
Lezioni di Tecnologie e Materiali per l Elettronica Printed Circuits Danilo Manstretta microlab.unipv.it/ danilo.manstretta@unipv.it Printed Circuits Printed Circuits Materials Technological steps Production
More information82 CONDUCTIVE TAPES SHEETS
82 CONDUCTIVE TAPESSHEETS CONDUCTIVE FABRIC Conductive fabric tape Conductive fabric P83 CONDUCTIVE FABRIC TAPE METAL FOIL P84 CONDUCTIVE FABRIC TAPE Low-resistivity type using embossed metal foil and
More informationNanoparticle Deposition on Packaging Materials by the Liquid Flame Spray
Nanoparticle Deposition on Packaging Materials by the Liquid Flame Spray Hannu Teisala a, Mikko Tuominen a, Mikko Aromaa b, Jyrki M. Mäkelä b, Milena Stepien c, Jarkko J. Saarinen c, Martti Toivakka c
More informationDevelopment of a Design & Manufacturing Environment for Reliable and Cost-Effective PCB Embedding Technology
Development of a Design & Manufacturing Environment for Reliable and Cost-Effective PCB Embedding Technology Outline Introduction CAD design tools for embedded components Thermo mechanical design rules
More informationDuPont Pyralux AP All-Polyimide Flexible Laminate A Family of High-Performance Adhesiveless Laminates for Flexible Printed Circuit Applications
Technical Information DuPont Pyralux AP All-Polyimide Flexible Laminate A Family of High-Performance Adhesiveless Laminates for Flexible Printed Circuit Applications Product Description Pyralux AP double-sided,
More informationInnovative Wafer and Interconnect Technologies - Enabling High Volume Low Cost RFID Solutions
Innovative Wafer and Interconnect Technologies - Enabling High Volume Low Cost RFID Solutions Innovative Wafer & Interconnect Technologies Outline Low cost RFID Tags & Labels Standard applications and
More informationFABRICATION 2011 SERVICES TECHNOLOGIES CAPABILITIES INDUSTRY
FABRICATION 2011 SERVICES 24HRS - 5 DAYS ON QUICK TURN PROTOTYPE Dear Customer, We would like to take this opportunity to welcome you and thank you for looking to ASA PCB as your Printed Circuit Manufacturing
More information2. Deposition process
Properties of optical thin films produced by reactive low voltage ion plating (RLVIP) Antje Hallbauer Thin Film Technology Institute of Ion Physics & Applied Physics University of Innsbruck Investigations
More informationFraunhofer ISIT, Itzehoe 14. Juni 2005. Fraunhofer Institut Siliziumtechnologie (ISIT)
Research and Development centre for Microelectronics and Microsystems Applied Research, Development and Production for Industry ISIT applies an ISO 9001:2000 certified quality management system. Certificate
More informationEmbedding components within PCB substrates
Embedding components within PCB substrates Max Clemons, Altium - March 19, 2014 Continued pressure for electronic devices that provide greater functionality in ever-smaller formfactors is not only providing
More informationPCB Assembly Guidelines for Intersil Wafer Level Chip Scale Package Devices
Assembly Guidelines for Intersil Wafer Level Chip Scale Package Devices Introduction There is an industry-wide trend towards using the smallest package possible for a given pin count. This is driven primarily
More informationImpact of Materials Prices on Cost of PV Manufacture Part I (Crystalline Silicon)
Impact of Materials Prices on Cost of PV Manufacture Part I (Crystalline Silicon) Nigel Mason SMEET II Workshop, London 27 Feb 2013 content Brief introduction to Solar PV Technologies Part I - Crystalline
More informationDry Film Photoresist & Material Solutions for 3D/TSV
Dry Film Photoresist & Material Solutions for 3D/TSV Agenda Digital Consumer Market Trends Components and Devices 3D Integration Approaches Examples of TSV Applications Image Sensor and Memory Via Last
More informationFlexible Printed Circuits Design Guide
www.tech-etch.com/flex Flexible Printed Circuits Design Guide Multilayer SMT Assembly Selective Plating of Gold & Tin-Lead Fine Line Microvias Cantilevered & Windowed Leads 1 MATERIALS CONDUCTOR Copper
More informationLaserbearbeitung von dünnen Schichten auf Rolle-zu-Rolle-Anlagen
Laserbearbeitung von dünnen Schichten auf Rolle-zu-Rolle-Anlagen Dr. Frank Allenstein 3D-Micromac AG 3D-Micromac At a Glance 141 employees in R&D, manufacturing and service Worldwide more than 300 industrial
More informationDFX - DFM for Flexible PCBs Jeremy Rygate
DFX - DFM for Flexible PCBs Jeremy Rygate 1 Jeremy Rygate 30 years experience with Front End in the Electronics industry and PCB manufacturing. Experience in advanced PCBs, particularly Flex, Flex-rigid
More informationIntelligent implants for diagnosis and therapy
Dr. Alfred Stett 04.12.2012 IMAPS Workshop Paris Intelligent implants for diagnosis and therapy Natural and Medical Sciences Institute at the University of Tübingen Natural and Medical Sciences Institute
More informationFlex-Rigid Design Guide Part 1
Flex-Rigid Design Guide Part 1 The trend to miniaturization in electronics continues. Integrated circuit board solutions are becoming more and more popular as a means of efficiently utilizing the even
More informationBending, Forming and Flexing Printed Circuits
Bending, Forming and Flexing Printed Circuits John Coonrod Rogers Corporation Introduction: In the printed circuit board industry there are generally two main types of circuit boards; there are rigid printed
More informationA Novel Flex Circuit Area-Array Interconnect System for a Catheter-Based Ultrasound Transducer
Presented at IMAPS 2002 Denver, Colorado September 5, 2002 (Best of Session Award) A Novel Flex Circuit Area-Array Interconnect System for a Catheter-Based Ultrasound Transducer Jeff Strole*, Scott Corbett*,
More informationFLEXIBLE CIRCUITS MANUFACTURING
IPC-DVD-37 FLEXIBLE CIRCUITS MANUFACTURING Below is a copy of the narration for DVD-37. The contents of this script were developed by a review group of industry experts and were based on the best available
More informationFlex Circuit Design and Manufacture.
Flex Circuit Design and Manufacture. Hawarden Industrial Park, Manor Lane, Deeside, Flintshire, CH5 3QZ Tel 01244 520510 Fax 01244 520721 Sales@merlincircuit.co.uk www.merlincircuit.co.uk Flex Circuit
More informationBasic Properties and Application Examples of PGS Graphite Sheet
Basic Properties and Application Examples of 1. Basic properties of Graphite sheet 2. Functions of Graphite sheet 3. Application Examples Presentation [Sales Liaison] Panasonic Electronic Devices Co.,
More informationAnalysis of BGA Solder Joint Reliability for Selected Solder Alloy and Surface Finish Configurations
Analysis of BGA Solder Joint Reliability for Selected Solder Alloy and Surface Finish Configurations Hugh Roberts / Atotech USA Inc Sven Lamprecht and Christian Sebald / Atotech Deutschland GmbH Mark Bachman,
More informationLight management for photovoltaics. Ando Kuypers, TNO Program manager Solar
Light management for photovoltaics Ando Kuypers, TNO Program manager Solar Global energy consumption: 500 ExaJoule/Year Solar irradiation on earth sphere: 5.000.000 ExaJoule/year 2 Capturing 0,01% covers
More informationSolutions without Boundaries. PCB Surface Finishes. Todd Henninger, C.I.D. Sr. Field Applications Engineer Midwest Region
Solutions without Boundaries PCB Surface Finishes Todd Henninger, C.I.D. Sr. Field Applications Engineer Midwest Region 1 Notice Notification of Proprietary Information: This document contains proprietary
More informationDual Integration - Verschmelzung von Wafer und Panel Level Technologien
ERÖFFNUNG DES INNOVATIONSZENTRUMS ADAPTSYS Dual Integration - Verschmelzung von Wafer und Panel Level Technologien Dr. Michael Töpper BDT Introduction Introduction Why do we need such large machines to
More informationPulse Withstanding Thick Film Chip Resistor-SMDP Series. official distributor of
Product: Pulse Withstanding Thick Film Chip Resistor-SMDP Series Size: /// official distributor of Pulse Withstanding Thick Film Chip Resistor-SMDP Series 1. Scope -This specification applies to ~ sizes
More informationAn Introduction to Rigid-Flex PCB Design Best Practices
An Introduction to Rigid-Flex PCB Design Best Practices Golden Rules for First Time Success in Rigid-Flex An Introduction to Rigid-Flex PCB Design Best Practices More designers increasingly face project
More informationTC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 1206, 0805, 0603
WF2Q, WF08Q, WF06Q ±%, ±0.5%, ±0.25%, ±0.%, ±0.05% TC50 High Precision Power Thin Film chip resistors (RoHS compliant Halogen Free) Size 206, 0805, 0603 *Contents in this sheet are subject to change without
More informationRecent Developments in Active Implants. Innovation of interconnections for Active Implant Applications
Recent Developments in Active Implants Innovation of interconnections for Active Implant Applications Valtronic s Overview 1) Introduction of Valtronic: from Micro-technology to Medtech 2) Active Implants:
More informationSolution Provider Portfolio
Solution Provider Portfolio Innovation for success Customized solutions First-class service portfolio Innovative technologies Compelling solutions Electronics play a key role in nearly every area of our
More informationINTERNATIONAL ATOMIC ENERGY AGENCY INSTRUMENTATION UNIT SMD (SURFACE MOUNTED DEVICES) REPAIR S. WIERZBINSKI FEBRUARY 1999
(SURFACE MOUNTED DEVICES) REPAIR S. WIERZBINSKI FEBRUARY 1999 (SURFACE MOUNTED DEVICES) REPAIR 1 TABLE OF CONTENTS PAGE 1. INTRODUCTION 3 2. ADVANTAGES 4 3. LIMITATIONS 4 4. DIALECT 5 5. SIZES AND DIMENSIONS
More informationto realize innovative electronic products 2 June 13, 2013 Jan Eite Bullema 3D Printing to realize innovative electronic products
Overview of 2 What is? Methods / Materials / Current Products Rapid Prototyping evolves to Additive Manufacturing in Electronics Manufacturing Recent developments in 3D printing at TNO Conclusions / jan_eite.bullema@tno.nl
More informationTransition to 4 and 5 BB designs for Ni/Cu/Ag plated cells
6th Workshop on Metallization & nterconnection for Crystalline Silicon Solar Cells Transition to 4 and 5 BB designs for Ni/Cu/Ag plated cells Rena Technologies: Trina Solar: MacDermid Enthone: N.Bay, J.Burschik,
More informationOPTIMIZING OF THERMAL EVAPORATION PROCESS COMPARED TO MAGNETRON SPUTTERING FOR FABRICATION OF TITANIA QUANTUM DOTS
OPTIMIZING OF THERMAL EVAPORATION PROCESS COMPARED TO MAGNETRON SPUTTERING FOR FABRICATION OF TITANIA QUANTUM DOTS Vojtěch SVATOŠ 1, Jana DRBOHLAVOVÁ 1, Marian MÁRIK 1, Jan PEKÁREK 1, Jana CHOMOCKÁ 1,
More informationAutarkic Distributed Microsystems new Dimensions of Miniaturization
Autarkic Distributed Microsystems new Dimensions of Miniaturization Klaus-Dieter Lang, M. Jürgen Wolf, Fraunhofer IZM; TU Berlin () Seite 1 Outline Introduction Requirements to System Integration Technologies
More informationSilicon Wafer Solar Cells
Silicon Wafer Solar Cells Armin Aberle Solar Energy Research Institute of Singapore (SERIS) National University of Singapore (NUS) April 2009 1 1. PV Some background Photovoltaics (PV): Direct conversion
More informationRigid-Flex PCB Right the First Time - Without Paper Dolls
As originally published in the IPC APEX EXPO Conference Proceedings. Rigid-Flex PCB Right the First Time - Without Paper Dolls Benjamin Jordan Altium Inc. Abstract The biggest problem with designing rigid-flex
More informationFlex Circuits for the ATLAS Pixel Detector
Flex Circuits for the ATLAS Pixel Detector P. Skubic University of Oklahoma Outline ATLAS pixel detector ATLAS prototype Flex hybrid designs Performance simulations Performance measurements Wire bonding
More information1. INTRODUCTION ABSTRACT
MultiWave Hybrid Laser Processing of Micrometer Scale Features for Flexible Electronics Applications J. Hillman, Y. Sukhman, D. Miller, M. Oropeza and C. Risser Universal Laser Systems, 7845 E. Paradise
More informationHandling and Processing Details for Ceramic LEDs Application Note
Handling and Processing Details for Ceramic LEDs Application Note Abstract This application note provides information about the recommended handling and processing of ceramic LEDs from OSRAM Opto Semiconductors.
More informationMounting Instructions for SP4 Power Modules
Mounting Instructions for SP4 Power Modules Pierre-Laurent Doumergue R&D Engineer Microsemi Power Module Products 26 rue de Campilleau 33 520 Bruges, France Introduction: This application note gives the
More informationKeeping Current to Stay Competitive in Flex PCB Laser Processing
White Paper Keeping Current to Stay Competitive in Flex PCB Laser Processing Market Drivers, Trends and Methodologies ESI by Patrick Riechel, PCB Product Manager The push for smaller, cheaper and more
More informationChapter 6 Metal Films and Filters
Chapter 6 Metal Films and Filters 6.1 Mirrors The first films produced by vacuum deposition as we know it were aluminum films for mirrors made by John Strong in the 1930s; he coated mirrors for astronomical
More information0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors
0.9 0.2 mm Pitch, 0.9 mm above the board, Flexible Printed Circuit ZIF Connectors FH43B Series Space saving 17.8mm(81 pos. shown) 2.77 Can be mounted over conductive traces. Features 1. Low-profile, small
More informationCHAPTER 5. OVERVIEW OF THE MANUFACTURING PROCESS
CHAPTER 5. OVERVIEW OF THE MANUFACTURING PROCESS 5.1 INTRODUCTION The manufacturing plant considered for analysis, manufactures Printed Circuit Boards (PCB), also called Printed Wiring Boards (PWB), using
More information