2200 Series End Drive Conveyors

Size: px
Start display at page:

Download "2200 Series End Drive Conveyors"

Transcription

1 00 Series End Drive Conveyors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box Cottonwood Ave. TEL: TEL: Hartland, WI USA FAX: FAX: Rev. I For other service manuals visit our website at:

2 Table of Contents Introduction... 3 Warnings General Safety... 4 Product Description... 5 Specifications... 5 Installation... 7 Required Tools... 7 Recommended Installation Sequence... 7 Conveyors Up to ft (3658 mm)... 7 Conveyors Longer Than ft (3658 mm)... 7 Mounting Brackets... 8 Return Rollers... 9 Cleated Belt and 6 (5 5 mm) Wide Flat Belt Conveyors (03 60 mm) Wide Flat Belt Conveyors... 9 Preventive Maintenance and Adjustment... 0 Required Tools... 0 Standard Tools... 0 Special Tools... 0 Checklist... 0 Lubrication... 0 Maintaining Conveyor Belt... 0 Troubleshooting... 0 Cleaning... 0 Conveyor Belt Replacement... 0 Conveyor Belt Replacement Sequence... 0 Belt Removal for Conveyor Without Stands or Gearmotor Mounting Package... 0 Belt Removal for Conveyor With Stands and Gearmotor Mounting Package... Belt Installation for Conveyor without Stands or Gearmotor Mounting Package... Belt Installation for Conveyor with Stands and Gearmotor Mounting Package... Conveyor Belt Tensioning... 3 Conveyors with.5 (3 mm) Diameter Pulleys... 3 Conveyors with Nose Bar Idlers... 3 Conveyor Belt Tracking... 4 V-Guided Belts... 4 Non V-Guided Belts... 4 Pulley Removal... 4 A Idler Pulley Removal... 5 B Drive Pulley Removal... 5 Bearing Removal & Replacement... 6 Removal... 6 Replacement... 6 Drive Pulley and Pulley Installation... 7 Drive Pulley Installation... 7 Idler Pulley Installation... 7 Nose Bar Bearing Replacement... 7 Notes... 9 Service Parts... 0 (5mm) Wide Conveyor (76mm) to 6 (5mm) Wide Conveyor... 8 (03mm) to (305mm) Wide Conveyor (457mm) to 4 (60mm) Wide Conveyor... 6 Nosebar End Assembly (76mm) Aluminum Side (38mm) Aluminum Side Low to Side Wiper Low to High Side (3mm) Extruded Plastic Adjustable Guiding (3mm) Cleated Belt Guiding (5mm) Cleated Belt Guiding (5mm) Cleated Belt Guiding Flared Side Guiding Flat Belt Stand Mount Assembly Cleated Belt Stand Mount Assembly Flat Belt Stand Mount Assembly for (60mm) Conveyors Cleated Belt Stand Mount Assembly for (60mm) Conveyors Connecting Assembly without Stand Mount... 4 Flat Belt Connecting Assembly with Stand Mount)... 4 Cleated Belt Connecting Assembly with Stand Mount.. 4 (5mm) to 6 (5mm) Flat Belt Return Roller (03mm) to 4 (60mm) Flat Belt Return Roller Cleated Belt Return Roller Conveyor Belt Part Number Configuration Notes Return Policy Dorner Mfg. Corp Rev. I

3 Introduction IMPORTANT Some illustrations may show guards removed. DO NOT operate equipment without guards. Upon receipt of shipment: Compare shipment with packing slip. Contact factory regarding discrepancies. Inspect packages for shipping damage. Contact carrier regarding damage. Accessories may be shipped loose. See accessory instructions for installation. Dorner s Limited Warranty applies. Dorner has convenient, pre configured kits of Key Service Parts for all conveyor products. These time saving kits are easy to order, designed for fast installation, and guarantee you will have what you need when you need it. Key Parts and Kits are marked in the Service Parts section of this manual with the Performance Parts Kits logo. Dorner 00 series conveyors are covered by Patent Numbers 5,74,435, 6,98,98, 6,4,38 and corresponding patents and patent applications in other countries. Dorner reserves the right to make changes at any time without notice or obligation Rev. I 3 Dorner Mfg. Corp.

4 Warnings General Safety A WARNING The safety alert symbol, black triangle with white exclamation, is used to alert you to potential personal injury hazards. A DANGER Climbing, sitting, walking or riding on conveyor will cause severe injury. KEEP OFF CONVEYORS. A DANGER A WARNING Dorner cannot control the physical installation and application of conveyors. Taking protective measures is the responsibility of the user. When conveyors are used in conjunction with other equipment or as part of a multiple conveyor system, CHECK FOR POTENTIAL PINCH POINTS and other mechanical hazards before system start-up. A WARNING DO NOT OPERATE CONVEYORS IN AN EXPLOSIVE ENVIRONMENT. A WARNING Loosening stand height or angle adjustment screws may cause conveyor sections to drop down, causing severe injury. SUPPORT CONVEYOR SECTIONS PRIOR TO LOOSENING STAND HEIGHT OR ANGLE ADJUSTMENT SCREWS. Exposed moving parts can cause severe injury. LOCK OUT POWER before removing guards or performing maintenance. A WARNING Gearmotors may be HOT. DO NOT TOUCH Gearmotors. Dorner Mfg. Corp Rev. I

5 Product Description Refer to Figure for typical components. A Conveyor Figure B C D B C Gearmotor Mounting Package Gearmotor I J D E F Guiding & Accessories Mounting Brackets Return Rollers A E F E G H Support Stand Variable Speed Controller H I Drive End G J Idler/Tension End Figure Specifications Models: Flat Belt 00 Series Conveyor 0 M WW LLLL A PP BB Belt Type* Conveyor Profile* Output Shaft Position* Conveyor Length Reference Conveyor Width Reference Document Language, M = English Pulley Type: 0 = Standard.5 (3mm) Dia. = Gang Drive (5mm) Dia. = with belt tracking cams and mounting brackets = with V-guide tracking and mounting brackets 3 = with nosebar transfer tail and mounting brackets 4 = with V guide tracking and no mounting brackets 5 = with belt tracking cams and no mounting brackets 6 = with nosebar transfer tail and no mounting brackets Cleated Belt 00 Series Conveyor 4 C M WW LLLL A SSSS Cleat Spacing* Output Shaft Position* Conveyor Length Reference Conveyor Width Reference Document Language, M = English Cleat Type* 0 = with V-guide tracking and no mounting brackets 4 = with V-guide tracking and mounting brackets 5 = with belt tracking cams and mounting brackets 9 = with belt tracking cams and no mounting brackets * See Ordering and Specifications Catalog for details. Conveyor Supports: Figure K L M Maximum Distances: K = 8 (457 mm)** L = 6 ft (89 mm)*** M = 8 (457 mm) ** For Heavy Load Bottom Mount Package, mount support under gear head. *** For conveyors longer than ft (3658 mm), install support at joint. Figure Rev. I 5 Dorner Mfg. Corp.

6 Specifications Specifications: Conveyor Width Reference (WW) Conveyor Belt Width.75 (44mm) Maximum Conveyor Load* (See NOTE Below) Conveyor Startup Torque* Belt Travel Maximum Belt Speed* Belt Takeup 30 lb (4kg) in-lb (0.5Nm).75 (70mm) 35 lb (6kg) 3 in-lb (0.6Nm) 3.75 (95mm) 4 lb (9kg) 4 in-lb (0.7Nm) 5 (7mm) 50 lb (3kg) 6 in-lb (0.8Nm) 6 (5mm) 60 lb (7kg) 8 in-lb (0.9Nm) 8 (03mm) 70 lb (3kg) 0 in-lb (.Nm) 0 (54mm) 80 lb (36kg) in-lb (.4Nm) (305mm) 80 lb (36kg) 4 in-lb (.5Nm) 4.0 (88 mm) per revolution of pulley 64 ft/minute (80.5 m/minute) 0.38 (0 mm) of stroke = 0.75 (9 mm) of belt take-up 8 (457mm) 80 lb (36kg) 5 in-lb (.7Nm) (533mm) 80 lb (36kg) 8 in-lb (.0Nm) 4 (609mm) 80 lb (36kg) 0 in-lb (.3Nm) Conveyor Length Reference (LL) Conveyor Length Up to 8 ft in any length to nearest 0. (3mm) ** 4** 5** 6** 7** 8** 8-ft (5486 mm)** 7-ft (58 mm)** 6-ft (4877 mm)** 5-ft (457 mm)** 4-ft (467 mm)** 3-ft (396 mm)** -ft (3658 mm) -ft (3353 mm) 0-ft (3048 mm) 9-ft (743 mm) 8-ft (438 mm) 7-ft (34 mm) 6-ft (89 mm) 5-ft (54 mm) 4-ft (9 mm) 3-ft (94 mm) -ft (60 mm) NOTE Maximum conveyor loads based on: Non-accumulating product Product moving towards gearmotor Conveyor being mounted horizontal * See Ordering and Specifications Catalog for details. ** Lengths available only in 6 (5 mm) & wider conveyors. Dorner Mfg. Corp Rev. I

7 Installation NOTE Conveyor MUST be mounted straight, flat and level within confines of conveyor. Use a level (Figure 3, item N) for setup. Conveyors Longer Than ft (3658 mm). Locate conveyor sections (Figure 4, item O) Figure 4 Figure 3 N O O Figure 4. On tension end of the conveyor, identified with Figure 3 Installation Component List O Conveyor frame (two sections if longer than ft) P Conveyor brackets (4x) Q Return rollers (for longer conveyors) Required Tools Figure 5 a label (Figure 5, item R), push in head plate assembly (S): On both sides of conveyor, loosen and move cam tracking assemblies (T) (if equipped) away from head plates, then loosen fastening screws (U) and push head plate assembly inward. U T Hex-key wrenches: 4 mm, 5 mm Level Torque wrench Recommended Installation Sequence Install support stands (see accessory instructions) Assemble conveyor (if required) Attach mounting brackets to conveyor Attach conveyor to stands Install return rollers on conveyor (optional) Mount gearmotor mounting package (see accessory instructions) Attach guides/accessories (see page 0 through page 43 of Service Parts section for details) Conveyors Up to ft (3658 mm) No assembly is required. Install mounting brackets and return rollers. Refer to Mounting Brackets on page 8 and Return Rollers on page 9. Figure 5 3. Roll out conveyor belt and place conveyor frame sections (Figure 6, item O) into belt loop. Figure 6 S O Figure 6 4. Join conveyor sections and install frame connector plates (Figure 7, item V) or connector/mount brackets (VA) and screws (W) on both sides as indicated. Tighten screws to 60 in-lb (7 Nm). O R Rev. I 7 Dorner Mfg. Corp.

8 Installation Figure 7 Figure 9 V Y AC W AB Figure 7 5. With a 5 mm hex-key wrench, rotate pinion gear (Figure 8, item X) to tension the conveyor belt. Tighten fastening screws (U) on both sides of conveyor to 80 inlb (9 Nm). For proper tensioning, refer to Conveyor Belt Tensioning on page 3. VA AA Z Figure 9 Figure 8 Figure 0 U Y AC AB X Figure 8 6. Install mounting brackets and return rollers. Refer to Mounting Brackets on page 8 and Return Rollers on page If equipped with cam tracking assemblies (Figure 5, item T), reposition and adjust belt tracking. Refer to Conveyor Belt Tracking on page 4. Mounting Brackets. Locate brackets. Exploded views shown in Figure 9 & Figure 0. Z AA Figure 0. Remove screws (Figure 9, item Y & Z) & (Figure 0, item Y & Z), washers (AA), nuts (AB) and T-bars (AC) from brackets. 3. Insert T-bars (Figure 9, item AC) & (Figure 0, item AC) into conveyor side slots (Figure, item AD). Fasten brackets (Figure, item P) to conveyor with mounting screws (Y). Dorner Mfg. Corp Rev. I

9 Installation Figure AD. Remove screws (Figure, item AE) & (Figure 3, item AE) and clips (AF) from roller assembly. 3. Install roller assemblies (Figure 4, item Q) as shown. Tighten screws (AE) to 60 in-lb (7 Nm). Figure 4 Z AA AB Y P AE Q Q Figure 4. Fasten brackets to support stand with mounting screws (Figure, item Z), washers (AA) and nuts (AB). 5. Tighten screws (Figure, item Y & Z) to 60 in-lb (7 Nm). Return Rollers Cleated Belt and 6 (5 5 mm) Wide Flat Belt Conveyors. Locate return rollers. Exploded views shown in Figure & Figure 3. Figure NOTE Mounting brackets for flat belt conveyors shown. AF AE Figure (03 60 mm) Wide Flat Belt Conveyors. Locate return rollers. Exploded view shown in Figure 5. Figure 5 Figure 5. Remove screws (Figure 5, item AG) and clips (AH) from roller assembly. 3. Install roller assembly as shown (Figure 6, item Q). Tighten screws (AG) to 60 in-lb (7 Nm). Figure 6 AG AH AH AG AE AF Q Figure 3 Figure AG AF AE Figure 6 AE AF Figure Rev. I 9 Dorner Mfg. Corp.

10 Preventive Maintenance and Adjustment Required Tools Standard Tools Hex-key wrenches:.5 mm, 4 mm, 5 mm Arbor press Special Tools Bearing Puller Tool (or equivalent) 4509 Bearing Installation Tool Bearing Removal Tool Checklist Keep service parts on hand (see Service Parts section for recommendations) Keep supply of belt cleaner (part # 6569) Clean entire conveyor and knurled pulley while disassembled Replace worn or damaged parts Lubrication No lubrication is required. Replace bearings if worn. Maintaining Conveyor Belt Damage to V-guide indicates: Twisted or damaged conveyor frame Dirt impacted on pulleys Excessive or improper side loading Cleaning NOTE Visit for complete list of troubleshooting solutions. IMPORTANT Do not use belt cleaners that contain alcohol, acetone, Methyl Ethyl Ketone (MEK) or other harsh chemicals. Use Dorner Belt Cleaner (part # 6569). Mild soap and water may also be used. Do not soak the belt. For /05 woven polyester and /06 black anti-static belts, use a bristled brush to improve cleaning. Conveyor Belt Replacement A WARNING Troubleshooting Inspect conveyor belt for: Surface cuts or wear Stalling or slipping Damage to V-guide Surface cuts and wear indicate: Sharp or heavy parts impacting belt Jammed parts Improperly installed bottom wipers (if installed) Accumulated dirt in wipers (if installed) Foreign material inside the conveyor Improperly positioned accessories Bolt-on guiding is pinching belt Stalling or slipping indicates: Excessive load on belt Conveyor belt or drive timing belt are not properly tensioned Worn knurl or impacted dirt on drive pulley Intermittent jamming or drive train problems Exposed moving parts can cause severe injury. LOCK OUT POWER before removing guards or performing maintenance. Conveyor Belt Replacement Sequence Remove old conveyor belt: - Conveyor without Stands or Gearmotor Mounting Package - Conveyor with Stands and Gearmotor Mounting Package Install new conveyor belt Tension conveyor belt Belt Removal for Conveyor Without Stands or Gearmotor Mounting Package. If equipped, remove bottom wipers (Figure 7, item AJ): Remove fastening screws (AI) then remove wiper (AJ). Dorner Mfg. Corp Rev. I

11 Preventive Maintenance and Adjustment Figure 7 Figure 9 AI AI AM AJ AL AK AK AM Figure 7. If equipped, remove return rollers and guiding and accessories from one side of conveyor. 3. On tension end of the conveyor, identified with a Figure 8 label (Figure 8, item R), push in head plate assembly (S): On both sides of conveyor, loosen and move cam tracking assemblies (T) (if equipped) away from head plates, then loosen fastening screws (U) and push head plate assembly inward. U T Figure 9. Remove mounting brackets (Figure 9, item AM) from one side of conveyor. (Reverse steps 3 & 4 of Mounting Brackets section beginning on page 8.) If equipped with heavy load drive package, remove brackets from side opposite drive cover (Figure 0, item AN). 3. If equipped, remove bottom wipers (Figure 7, item AJ): Remove fastening screws (AI) then remove wiper (AJ). 4. If equipped, remove return rollers, guiding and accessories from side opposite drive cover (Figure 0, item AN). Figure 0 AO S Figure 8 R AN 4. Remove conveyor belt. Belt Removal for Conveyor With Stands and Gearmotor Mounting Package A WARNING AO AP Removing mounting brackets without support under gearmotor will cause conveyor to tip, causing severe injury. PROVIDE SUPPORT UNDERNEATH THE GEARMOTOR WHEN CHANGING THE BELT. Place temporary support stands (Figure 9, item AK) at both ends of the conveyor. Place an additional support stand under the drive motor (AL), if equipped. See WARNING. Figure 0 5. If equipped with heavy load drive package, remove drive support bracket (Figure 0, item AP): Remove bracket screws (AO) then remove bracket (AP). 6. On tension end of the conveyor, identified with a label (Figure, item R), push in head plate assembly (S): On both sides of conveyor, loosen and move cam tracking assemblies (T) (if equipped) away from head plates, then loosen fastening screws (U) and push head plate assembly inward Rev. I Dorner Mfg. Corp.

12 Preventive Maintenance and Adjustment Figure U T Belt Installation for Conveyor with Stands and Gearmotor Mounting Package A WARNING S R Figure 7. Remove belt (Figure, item AQ) from conveyor. Figure AQ Figure Belt Installation for Conveyor without Stands or Gearmotor Mounting Package. Orient belt so splice leading fingers (Figure 3, item AR) point in the direction of belt travel as identified by the conveyor directional label (AS). AQ. Ensure temporary support stands (Figure 9, item AK) are placed at both ends of the conveyor. Place an additional support stand under the drive motor (AL), if equipped. See WARNING.. Orient belt so splice leading fingers (Figure 3, item AR) point in the direction of belt travel as identified by the conveyor directional label (AS). 3. Install belt (Figure 4, item AQ) on conveyor. Lift conveyor slightly to avoid pinching belt on temporary support stands. Figure 4 Removing mounting brackets without support under gearmotor will cause conveyor to tip, causing severe injury. PROVIDE SUPPORT UNDERNEATH THE GEARMOTOR WHEN CHANGING THE BELT Figure 3 AQ AQ AR AS Figure 3. Slide belt onto the conveyor frame assembly. 3. Tension belt. Refer to Conveyor Belt Tensioning on page If equipped, install wipers, return rollers and guiding. Figure 4 4. Re-install conveyor mounting brackets. Refer Mounting Brackets beginning on page 8, steps 3 through If equipped with a heavy load drive package, re-install drive support bracket (Figure 0, item AP). 6. Tension belt. Refer to Conveyor Belt Tensioning on page 3 7. If equipped, re-install wipers, return rollers and guiding. Dorner Mfg. Corp Rev. I

13 Preventive Maintenance and Adjustment Conveyor Belt Tensioning Conveyors with.5 (3 mm) Diameter Pulleys. On tension end of the conveyor, identified with a Figure 5 A WARNING Exposed moving parts can cause severe injury. LOCK OUT POWER before removing guards or performing maintenance. label (Figure 5, item R), adjust head plate assembly (S): On both sides of conveyor, loosen fastening screws (U) and rotate pinion gear (X) to adjust head plate assembly. U T NOTE On pinion gear, do not exceed a torque of 5 in-lb (.8 Nm) for (44 305mm) wide conveyors and 50 in-lb (4.5 Nm) for an 8 4 (457 60mm) wide conveyor. Over tensioning the conveyor belt could cause excessive pulley bearing load and early failure. 3. After adjusting proper tensioning, tighten fastening screws (Figure 5, item U) on both sides of conveyor to 60 in-lb (7 Nm). 4. If equipped with cam tracking assemblies (Figure 5, item T), position against head plates and adjust belt tracking. Refer to Conveyor Belt Tracking on page 4. Conveyors with Nose Bar Idlers. On tension end of the conveyor, identified with a label (Figure 7, item R), adjust head plate assembly (S): On both sides of conveyor, loosen fastening screws (U) and rotate pinion gear (X) to adjust head plate assembly. Figure 7 S R X U T Figure 5. Adjust head plate assembly so end of conveyor frame aligns with or between the head plate tensioning marks (Figure 6, item AT & AU). Replace belt if proper tensioning can not be obtained while aligning the end of the conveyor frame with or between the tensioning marks. See NOTE. Figure 6 S Figure 7. Adjust head plate assembly so the edge of the axle support plate (Figure 8, item AV) is separated from the end of the conveyor (AW) by.5 (9 mm). Replace belt if proper tensioning can not be obtained within a distance of.50 (38 mm). See NOTE. R X AT AU Figure Rev. I 3 Dorner Mfg. Corp.

14 Preventive Maintenance and Adjustment Figure 8 Figure 9 BELT TRAVEL U T AV AW.5 (9 mm) S AY Figure 8 3. After adjusting proper tensioning, tighten fastening screws (Figure 7, item U) on both sides of conveyor to 60 in-lb (7 Nm). 4. If equipped with cam tracking assemblies (Figure 7, item T) position against head plates and adjust belt tracking. Refer to Conveyor Belt Tracking, next section. Conveyor Belt Tracking V-Guided Belts V-guided belts do not require tracking adjustment. Non V-Guided Belts NOTE On pinion gear, do not exceed a torque of 5 in-lb (.8 Nm) for (44 305mm) wide conveyors or 50 in-lb (4.5 Nm) for an 8 4 (457 60mm) wide conveyor. Over tensioning the conveyor belt could cause excessive pulley bearing load and early failure. Non V-guided belt conveyors are equipped with belt tracking cam assemblies (Figure 9, item T) for belt tracking adjustment. AZ Figure 9 When adjusting belt tracking, always adjust the discharge end of the conveyor first. To adjust belt tracking: 5. Ensure head plate fastening screws (Figure 9, item U) on both sides of conveyor are tightened. 6. On both sides of conveyor, loosen two () cam fastening screws (AX). Adjust cams (AY) until indicator slots (AZ) are horizontal and facing end of conveyor. Then slide cam assemblies against head plates (S) and retighten cam fastening screws (AX) to 60 in-lb (7 Nm). 7. On the side toward which the belt is tracking, loosen head plate fastening screws (U). 8. With the conveyor running, use a 5 mm hex-key wrench to rotate the tracking cam (AY) in small increments until the belt tracks in the center of the conveyor. Then while holding the cam in position, re-tighten the head plate fastening screws (U) with a 4 mm hex-key wrench to 60 in-lb (7 Nm). Pulley Removal AX A WARNING Exposed moving parts can cause severe injury. LOCK OUT POWER before removing guards or performing maintenance. Leaving the conveyor belt in place, remove the desired pulley following the corresponding instructions below: A Idler Pulley Removal B Drive Pulley Removal Dorner Mfg. Corp Rev. I

15 Preventive Maintenance and Adjustment A Idler Pulley Removal. On one side of the conveyor, loosen two () head plate fastening screws (Figure 30, item U) and remove them. Figure 3 NOTE To prevent damage to the head plates and pulley, be sure to remove them slowly because they are not attached to pulley. Figure 30 Figure 3 4. Slide spindle out of the belt loop. U B Drive Pulley Removal A WARNING Figure 30. Remove the head plate (Figure 3, item BA) from the conveyor frame. Figure 3 Drive shaft keyway may be sharp. HANDLE WITH CARE.. On one side of the conveyor, loosen two () head plate fastening screws (Figure 33, item U) and remove. NOTE To prevent damage to the head plates, be sure to remove them slowly because they are not attached to pulley. Figure 33 BA Figure 3 3. Pulley will slide out of opposite head plate and drop into slack of belt (Figure 3). U Figure 33. Remove the head plate (Figure 34, item BA) from the conveyor frame Rev. I 5 Dorner Mfg. Corp.

16 Preventive Maintenance and Adjustment Figure 34 Figure 36 BD BA Figure Drive pulley will slide out of opposite head and drop into slack of belt. 4. Slide the drive pulley out of the belt loop. Bearing Removal & Replacement Replacement Figure 36. Inspect the head plates bearing seating surface (Figure 37, item BC). If they are worn or damaged, replace the head. See Service Parts beginning on page 0. Figure 37 Removal IMPORTANT Do not use any removed bearings. Replace them. BC. Use a bearing removal tool, (Figure 35, item BD), (Figure 36, item BD), part number , or equivalent and remove both bearings from the pulley and the drive pulley. Figure 35 BD Figure 37 NOTE Two washers may be required when installing the bearing over the drive shaft on the drive pulley, if the bearing installation tool is not long enough to fit the length of the drive shaft. Figure 35. Use a bearing installation tool, (Figure 38, item BE), part number 4509 or equivalent and press bearings onto the pulley and drive pulley. Dorner Mfg. Corp Rev. I

17 Preventive Maintenance and Adjustment Figure 38 Figure 40 BE BA Figure 38 Drive Pulley and Pulley Installation Drive Pulley Installation. With opposite head plate installed, position the drive pulley through the loop of the belt, into the opposite head plate. Figure 39 Figure 40. Place the head plate (Figure 40, item BA) and attach the head plate to the conveyor frame with the two () screws removed and hand tighten. Nose Bar Bearing Replacement. On both sides of conveyor, use a 4 mm hex-key wrench to loosen cam fastening screws (Figure 4, item BI) and slide cam assemblies toward the center of the conveyor. Figure 4 U BJ S BI BA Figure 39. Place the head plate (Figure 39, item BA) and attach the head plate to the conveyor frame with the two () screws removed. Tighten screws 60 in-lb (7Nm). Idler Pulley Installation. With opposite head plate installed, position the idler pulley through the loop of the belt, into the opposite head plate. Figure 4. On both sides of conveyor, use a 4 mm hex-key wrench to loosen head plate fastening screws (U) to remove belt tension. Then remove belt from end of conveyor. 3. On one side of conveyor, use a 3 mm and 4 mm hex-key wrench to remove head plate fastening screws (BJ & U) and remove head plate (S). 4. Slide bearing rods (Figure 4, item BL) out side of conveyor and replace bearings (BK) as necessary Rev. I 7 Dorner Mfg. Corp.

18 Preventive Maintenance and Adjustment Figure 4 BL BK Figure 4 5. After replacing bearings, re-install head plate (Figure 4, item S). Use a 3 mm hex-key wrench to tighten one () fastening screw (BL) to 30 in-lb (3.4 Nm). Leave two () fastening screws (U) loose for belt tensioning. 6. Re-install belt on end of conveyor, then tension the belt. See Conveyor Belt Tensioning on page Re-position the cam assemblies against the head plates and adjust belt tracking. See Conveyor Belt Tracking on page 4. Dorner Mfg. Corp Rev. I

19 Notes Rev. I 9 Dorner Mfg. Corp.

20 Service Parts (5mm) Wide Conveyor NOTE For replacement parts other than those shown in this section, contact an authorized Dorner Service Center or the factory. Key Service Parts and Kits are identified by the Performance Parts Kits logo. Dorner recommends keeping these parts on hand. 8 Drive Spindle Kit 9 Nosebar Drive 0 Idler Spindle Kit Spindle Kit C & D Position OR 6 A & B Position 3 Dorner Mfg. Corp Rev. I

21 Service Parts 9069M Socket 4045 Head Screw M6 x mm Head Plate LH Head Plate LH Drive Side, Position A and B Head Plate RH Drive Side, Position C and D Bearing Idler Spindle (5mm) Magnet.5 Dia. x.5 long Sleeve, SSP Magnet Stainless Steel Head Plate RH Socket M Head Screw M6 x 0mm 4039 Tension Slide Bar 4040 Rack Gear 4.5 Degree PA x 4 P Pinion (5mm) Pinion Pin Drive Spindle (5mm) 4760 Nosebar Drive Spindle Lagged (5mm) M Square Key 4mm x mm 7 See Frame (5mm) Frame Chart 8 A 0 Drive Spindle Kit, Position A and B Grooved (Includes Items,, 3, 5, 9 and 5) D 0 Drive Spindle Kit, Position C and D Grooved (Includes Items,, 4, 5, 9 and 5) 9 NA 0 Nosebar Drive Spindle Kit, Position A and B Lagged, Smooth (Includes Items,, 3, 5, 9 and 5) ND 0 Nosebar Drive Spindle Kit, Position C and D Lagged, Smooth (Includes Items,, 4, 5, 9 and 5) 0 T 0 Idler Spindle Kit (Includes Items, and 5 through 0) Item 7: (5mm) Conveyor Frame Length Part Number (60mm) (94mm) (9mm) (54mm) (89mm) (34mm) (438mm) (743mm) (3048mm) (3353mm) (3658mm) Rev. I Dorner Mfg. Corp.

22 Service Parts 3 (76mm) to 6 (5mm) Wide Conveyor 0 Drive Spindle Kit C & D Position OR 3 Idler Spindle Kit A & B Position 6 Nosebar Drive Spindle Kit Dorner Mfg. Corp Rev. I

23 Service Parts 9069M Socket Head Screw M6 x mm 4045 Head Plate LH Head Plate LH Drive Side, Position A and B Head Plate RH Drive Side, Position C and D Bearing 6 473WW Idler Spindle Magnet.5 Dia. x.5 long SSP Sleeve,.5 Magnet Stainless Steel Head Plate RH M Socket Head Screw M6 x 0mm 4039 Tension Slide Bar 4040 Rack Gear 4.5 Degree PA x 4P Pinion Bushing 4 030WWM Pinion Gear WW Drive Spindle (5mm) 476WW Nosebar Drive Spindle Lagged (5mm) MS Square Key 4mm x mm 7 See Frame Conveyor Frame Chart 8 See Bed Plate Conveyor Bed Plate Chart Flat Head Torx Screw M6 x 0mm 0 A WW Drive Spindle Kit, Position A and B Grooved (Includes Items,, 3, 5, 9 and 5) D WW Drive Spindle Kit, Position C and D Grooved (Includes Items,, 4, 5, 9 and 5) NA WW Nosebar Drive Spindle Kit, Position A and B Lagged, Smooth (Includes Items,, 3, 5, 9 and 5) ND WW Nosebar Drive Spindle Kit, Position C and D Lagged, Smooth (Includes Items,, 4, 5, 9 and 5) T WW Idler Spindle Kit (Includes Items, and 5 through 0) WW = Conveyor width reference: 03, 04, 05, 06 Item 7: Conveyor Frame Length Part Number (60mm) 404WW (94mm) 404WW (9mm) 404WW (54mm) 404WW (89mm) 404WW (34mm) 404WW (438mm) 404WW (743mm) 404WW (3048mm) 404WW 508 (3353mm) 404WW 708 (3658mm) 404WW (396mm) 404WW WW 07908* 4 (467mm) 404WW WW 0908* 5 (457mm) 404WW WW 0308* 6 (4877mm) 404WW WW 508* 7 (58mm) 404WW WW 708* 8 (5486mm) 404WW WW 3908* WW = Conveyor width reference: 03, 04, 05, 06 * = 6 (5mm) and wider conveyors, only Item 8: Bed Plate Length Part Number (60mm) 405WW (94mm) 405WW (9mm) 405WW (54mm) 405WW (89mm) 405WW (34mm) 405WW (438mm) 405WW (743mm) 405WW (3048mm) 405WW 500 (3353mm) 405WW 700 (3658mm) 405WW (396mm) 405WW WW 07900* 4 (467mm) 405WW WW 0900* 5 (457mm) 405WW WW 0300* 6 (4877mm) 405WW WW 500* 7 (58mm) 405WW WW 700* 8 (5486mm) 405WW WW 3900* WW= Conveyor Width reference: 03, 04, 05, 06 * = 6 (5mm) and wider conveyors, only Rev. I 3 Dorner Mfg. Corp.

24 Service Parts 8 (03mm) to (305mm) Wide Conveyor Drive Spindle Kit 3 Idler Spindle Kit C & D Position OR 3 9 Nosebar Drive Spindle Kit 8 0 A & B Position 9069M Socket Head Screw M6 x mm 4045 Head Plate LH Head Plate LH Drive Side, Position A and B Head Plate RH Drive Side, Position C and D Bearing 6 473WW Idler Spindle Magnet.5 Dia. x.5 long SSP Sleeve,.5 Magnet Stainless Steel Head Plate RH M Socket Head Screw M6 x 0mm 4039 Tension Slide Bar 4040 Rack Gear 4.5 Degree PA x 4P 3 See Chart Side Rail RH 4 See Chart Center Rail 5 030WWM Pinion Gear 6 See Chart Side Rail LH WW Drive Spindle (5mm) 476WW Nosebar Drive Spindle Lagged (5mm) M Square Key 4mm x mm 9 See Chart Conveyor Bed Plate Flat Head Torx Screw M6 x 0mm Dorner Mfg. Corp Rev. I

25 Service Parts A WW Drive Spindle Kit, Position A and B Grooved (Includes Items,, 3, 5, 9 and 7) D WW Drive Spindle Kit, Position C and D Grooved (Includes Items,, 4, 5, 9 and 7) NA WW Nosebar Drive Spindle Kit, Position A and B Lagged, Smooth (Includes Items,, 3, 5, 9 and 7) ND WW Nosebar Drive Spindle Kit, Position C and D Lagged, Smooth (Includes Items,, 4, 5, 9 and 7) 3 T WW Idler Spindle Kit (Includes Items, and 5 through 0) WW = Conveyor width reference: 08, 0, Item 3: Side Rail RH Length Part Number (60mm) (94mm) (9mm) (54mm) (89mm) (34mm) (438mm) (743mm) (3048mm) (3353mm) (3658mm) (396mm) (467mm) (457mm) (4877mm) (58mm) (5486mm) Item 4: Center Rail Length Part Number (60mm) (94mm) (9mm) (54mm) (89mm) (34mm) (438mm) (743mm) (3048mm) (3353mm) (3658mm) (396mm) (467mm) (457mm) (4877mm) (58mm) (5486mm) Item 6: Side Rail LH Length Part Number (60mm) (94mm) (9mm) (54mm) (89mm) (34mm) (438mm) (743mm) (3048mm) (3353mm) (3658mm) (396mm) (467mm) (457mm) (4877mm) (58mm) (5486mm) Item 7: Bed Plate Length Part Number (60mm) 405WW (94mm) 405WW (9mm) 405WW (54mm) 405WW (89mm) 405WW (34mm) 405WW (438mm) 405WW (743mm) 405WW (3048mm) 405WW 500 (3353mm) 405WW 700 (3658mm) 405WW (396mm) 405WW WW (467mm) 405WW WW (457mm) 405WW WW (4877mm) 405WW WW (58mm) 405WW WW (5486mm) 405WW WW 3900 WW = Conveyor Width reference: 08, 0, Rev. I 5 Dorner Mfg. Corp.

26 Service Parts 8 (457mm) to 4 (60mm) Wide Conveyor 4 Idler Spindle Kit 4 C & D Position Drive Spindle Kit OR Nosebar Drive Spindle Kit 9 0 A & B Position 9069M Socket 4045 Head Screw M6 x mm Head Plate LH Head Plate LH Drive Side, Position A and B Head Plate RH Drive Side, Position C and D Bearing 6 473WW Idler Spindle Magnet.5 Dia. x.5 long SSP Sleeve,.5 Magnet Stainless Steel Head Plate RH M Socket Head Screw M6 x 0mm 4039 Tension Slide Bar 4040 Rack Gear 4.5 Degree PA x 4 P 3 See Chart Side Rail RH 4 See Chart Center Rail 5 030WWM Pinion Gear Center Rail Cross Support 8 (457mm) 4048 Center Rail Cross Support (533mm) 4049 Center Rail Cross Support 4 (60mm) 7 See Chart Side Rail LH WW Drive Spindle (5mm) 476WW Nosebar Drive Spindle Lagged (5mm) M Square Key 4mm x mm 0 See Chart Conveyor Bed Plate Flat Head Torx Screw M6 x 0mm Dorner Mfg. Corp Rev. I

27 Service Parts Item 6: Side Rail LH A WW Drive Spindle Kit, Position A and B Length Part Number Grooved (Includes Items,, 3, 5, 9 and 8) (60mm) D WW Drive Spindle Kit, Position C and D Grooved (Includes Items,, 4, 5, 9 and 8) 3 NA WW Nosebar Drive Spindle Kit, Position A and B Lagged, Smooth (Includes Items,, 3, 5, 9 and 8) ND WW Nosebar Drive Spindle Kit, Position C and D Lagged, Smooth (Includes Items,, 4, 5, 9 and 8) 4 T WW Idler Spindle Kit (Includes Items, and 5 through 0) WW = Conveyor width reference: 8,, 4 Item 3: Side Rail RH Length Part Number (60mm) (94mm) (9mm) (54mm) (89mm) (34mm) (438mm) (743mm) (3048mm) (3353mm) (3658mm) (396mm) (467mm) (457mm) (4877mm) (58mm) (5486mm) Item 4: Center Rail Length Part Number (60mm) (94mm) (9mm) (54mm) (89mm) (34mm) (438mm) (743mm) (3048mm) (3353mm) (3658mm) (396mm) (467mm) (457mm) (4877mm) (58mm) (5486mm) (94mm) (9mm) (54mm) (89mm) (34mm) (438mm) (743mm) (3048mm) (3353mm) (3658mm) (396mm) (467mm) (457mm) (4877mm) (58mm) (5486mm) Item 7: Bed Plate Length Part Number (60mm) 405WW (94mm) 405WW (9mm) 405WW (54mm) 405WW (89mm) 405WW (34mm) 405WW (438mm) 405WW (743mm) 405WW (3048mm) 405WW 500 (3353mm) 405WW 700 (3658mm) 405WW (396mm) 405WW WW (467mm) 405WW WW (457mm) 405WW WW (4877mm) 405WW WW (58mm) 405WW WW (5486mm) 405WW WW 3900 WW = Conveyor Width reference: 8,, Rev. I 7 Dorner Mfg. Corp.

28 Service Parts Nosebar End Assembly Nosebar Roller Kit M Mounting Block, PLT Spindle 076WW Flex Link Bar 3 45 Outer Side Plate 4 46 Inner Side Plate LH 5 47 Inner Side Plate RH 6 48 Head Plate Bar 7 4WW Nosebar 8 43WW Nosebar Rod P Knurl Pin.5 DIA x.937 Lg 0 80 Nose Bar Roller 9058M Sockety Head Screw M5 x 8mm 90593M Socket Head Screw M5 x 6mm M Socket Head Screw M6 x mm M Flat Head Screw M5 x mm 5 N WW Nosebar Roller Kit (Includes Items 8 and 0) WW.= Conveyor width ref.: 0, 03, 04, 05, 06, 08, 0,, 8,, 4 Dorner Mfg. Corp Rev. I

29 04 3 (76mm) Aluminum Side Service Parts For Conveyors For 3 8 Conveyors Guide Retaining Clip See Chart 00 Guide 3 (76mm) HS Below P Single Drop in Tee Bar M Socket Head Screw M6 x 0mm Item : 00 Guide 3 (76mm) HS Length End Guide End Guide (60mm) Left Hand N/A Right Hand N/A 3 (94mm) Left Hand N/A Right Hand N/A 4 (9mm) Left Hand N/A Right Hand N/A 5 (54mm) Left Hand N/A Right Hand N/A 6 (89mm) Left Hand N/A Right Hand N/A 7 (34mm) Left Hand N/A Right Hand N/A 8 (438mm) Left Hand N/A Right Hand N/A 9 (743mm) Left Hand N/A Right Hand N/A 0 (3048mm) Left Hand N/A Right Hand N/A Item : 00 Guide 3 (76mm) HS Length End Guide End Guide (3353mm) Left Hand N/A Right Hand N/A (3658mm) Left Hand N/A Right Hand N/A 3 (396mm) Left Hand Right Hand (467mm) Left Hand Right Hand (457mm) Left Hand Right Hand (4877mm) Left Hand Right Hand (58mm) Left Hand Right Hand (5486mm) Left Hand Right Hand Rev. I 9 Dorner Mfg. Corp.

30 Service Parts 05.5 (38mm) Aluminum Side For Conveyors For 3 8 Conveyors Guide Retaining Clip See Chart Below 00 Guide 3 (76mm) HS M Single Drop in Tee Bar M Socket Head Screw M6 x 0mm Item : 00 Guide.5 (3mm) HS Length End Guide End Guide (60mm) Left Hand N/A Right Hand N/A 3 (94mm) Left Hand N/A Right Hand N/A 4 (9mm) Left Hand N/A Right Hand N/A 5 (54mm) Left Hand N/A Right Hand N/A 6 (89mm) Left Hand N/A Right Hand N/A 7 (34mm) Left Hand N/A Right Hand N/A 8 (438mm) Left Hand N/A Right Hand N/A 9 (743mm) Left Hand N/A Right Hand N/A 0 (3048mm) Left Hand N/A Right Hand N/A (3353mm) Left Hand N/A Right Hand N/A Item : 00 Guide.5 (3mm) HS Length End Guide End Guide (3658mm) Left Hand N/A Right Hand N/A 3 (396mm) Left Hand Right Hand (467mm) Left Hand Right Hand (457mm) Left Hand Right Hand (4877mm) Left Hand Right Hand (58mm) Left Hand Right Hand (5486mm) Left Hand Right Hand Dorner Mfg. Corp Rev. I

31 07 Low to Side Wiper Service Parts For Conveyors For 3 8 Conveyors Guide Retaining Clip See Chart Below 00 Guide 3 (76mm) HS Side Wiper Nylatron (per foot) M Single Drop in Tee Bar M Socket Head Screw M6 x 0mm Item : 00 Guide.5 (3mm) HS Length End Guide End Guide (60mm) Left Hand N/A Right Hand N/A 3 (94mm) Left Hand N/A Right Hand N/A 4 (9mm) Left Hand N/A Right Hand N/A 5 (54mm) Left Hand N/A Right Hand N/A 6 (89mm) Left Hand N/A Right Hand N/A 7 (34mm) Left Hand N/A Right Hand N/A 8 (438mm) Left Hand N/A Right Hand N/A 9 (743mm) Left Hand N/A Right Hand N/A 0 (3048mm) Left Hand N/A Right Hand N/A Item : 00 Guide.5 (3mm) HS Length End Guide End Guide (3353mm) Left Hand N/A Right Hand N/A (3658mm) Left Hand N/A Right Hand N/A 3 (396mm) Left Hand Right Hand (467mm) Left Hand Right Hand (457mm) Left Hand Right Hand (4877mm) Left Hand Right Hand (58mm) Left Hand Right Hand (5486mm) Left Hand Right Hand Rev. I 3 Dorner Mfg. Corp.

32 Service Parts 09 Low to High Side For Conveyors For 3 8 Conveyors Guide Retaining Clip See Chart Below 00 Guide 3 (76mm) HS M Single Drop in Tee Bar M Socket Head Screw M6 x 0mm Item : 00 Guide.5 (3mm) HS Length End Guide End Guide (60mm) Left Hand N/A Right Hand N/A 3 (94mm) Left Hand N/A Right Hand N/A 4 (9mm) Left Hand N/A Right Hand N/A 5 (54mm) Left Hand N/A Right Hand N/A 6 (89mm) Left Hand N/A Right Hand N/A 7 (34mm) Left Hand N/A Right Hand N/A 8 (438mm) Left Hand N/A Right Hand N/A 9 (743mm) Left Hand N/A Right Hand N/A 0 (3048mm) Left Hand N/A Right Hand N/A (3353mm) Left Hand N/A Right Hand N/A Item : 00 Guide.5 (3mm) HS Length End Guide End Guide (3658mm) Left Hand N/A Right Hand N/A 3 (396mm) Left Hand Right Hand (467mm) Left Hand Right Hand (457mm) Left Hand Right Hand (4877mm) Left Hand Right Hand (58mm) Left Hand Right Hand (5486mm) Left Hand Right Hand Dorner Mfg. Corp Rev. I

33 0.5 (3mm) Extruded Plastic Service Parts For Conveyors For 3 8 Conveyors Guide Retaining Clip 00054P Snap On Guide (per foot) 3 See Chart Below 00 Guide M Single Drop in Tee Bar M Socket Head Screw M6 x 0mm Item : 00 Guide.5 (3mm) HS Length End Guide End Guide (60mm) Left Hand N/A Right Hand N/A 3 (94mm) Left Hand N/A Right Hand N/A 4 (9mm) Left Hand N/A Right Hand N/A 5 (54mm) Left Hand N/A Right Hand N/A 6 (89mm) Left Hand N/A Right Hand N/A 7 (34mm) Left Hand N/A Right Hand N/A 8 (438mm) Left Hand N/A Right Hand N/A 9 (743mm) Left Hand N/A Right Hand N/A 0 (3048mm) Left Hand N/A Right Hand N/A (3353mm) Left Hand N/A Right Hand N/A Item : 00 Guide.5 (3mm) HS Length End Guide End Guide (3658mm) Left Hand N/A Right Hand N/A 3 (396mm) Left Hand Right Hand (467mm) Left Hand Right Hand (457mm) Left Hand Right Hand (4877mm) Left Hand Right Hand (58mm) Left Hand Right Hand (5486mm) Left Hand Right Hand Rev. I 33 Dorner Mfg. Corp.

34 Service Parts 3 Adjustable Guiding Aluminum Profile Guide (60mm) 0984 Aluminum Profile Guide 3 (94mm) 0985 Aluminum Profile Guide 4 (9mm) 0986 Aluminum Profile Guide 5 (54mm) 0987 Aluminum Profile Guide 6 (89mm) 0988 Aluminum Profile Guide 7 (34mm) 0989 Aluminum Profile Guide 8 (438mm) 0990 Aluminum Profile Guide 9 (743mm) 099 Aluminum Profile Guide 0 (3048mm) 099 Aluminum Profile Guide (3353mm) 0993 Aluminum Profile Guide (3658mm) 0994 Aluminum Profile Guide 3 (396mm) 00830M Drop In Tee Bar Mounting Bracket 4 007M Guide Mounting Shaft Vertical 5 008M Guide Moutning Shaft Horizontal MP Square Nut Cross Block Vinyl Shaft Cap P Flat Extruded Guide (per foot) 0 906M Socket Head Screw M6 x mm 9066M Socket Head Screw M6 x 6mm Dorner Mfg. Corp Rev. I

35 Service Parts 0.5 (3mm) Cleated Belt Guiding For Conveyors For 3 8 Conveyors Guide Retaining Clip See Chart 00 Guide.47 (3mm) Cleated Below M Drop In Tee Bar M Socket Head Screw M6 x 0mm Item : 00 Guide.5 (3mm) HS Length End Guide End Guide (60mm) Left Hand N/A Right Hand N/A 3 (94mm) Left Hand N/A Right Hand N/A 4 (9mm) Left Hand N/A Right Hand N/A 5 (54mm) Left Hand N/A Right Hand N/A 6 (89mm) Left Hand N/A Right Hand N/A 7 (34mm) Left Hand N/A Right Hand N/A 8 (438mm) Left Hand N/A Right Hand N/A 9 (743mm) Left Hand N/A Right Hand N/A 0 (3048mm) Left Hand N/A Right Hand N/A (3353mm) Left Hand N/A Right Hand N/A (3658mm) Left Hand N/A Right Hand N/A Item : 00 Guide.5 (3mm) HS Length End Guide End Guide 3 (396mm) Left Hand Right Hand (467mm) Left Hand Right Hand (457mm) Left Hand Right Hand (4877mm) Left Hand Right Hand (58mm) Left Hand Right Hand (5486mm) Left Hand Right Hand Rev. I 35 Dorner Mfg. Corp.

36 Service Parts (5mm) Cleated Belt Guiding For Conveyors For 3 8 Conveyors Guide Retaining Clip See Chart Below 00 Guide (5mm) Cleated M Drop In Tee Bar M Socket Head Screw M6 x 0mm Item : 00 Guide Length End Guide End Guide (60mm) Left Hand N/A Right Hand N/A 3 (94mm) Left Hand N/A Right Hand N/A 4 (9mm) Left Hand N/A Right Hand N/A 5 (54mm) Left Hand N/A Right Hand N/A 6 (89mm) Left Hand N/A Right Hand N/A 7 (34mm) Left Hand N/A Right Hand N/A 8 (438mm) Left Hand N/A Right Hand N/A 9 (743mm) Left Hand N/A Right Hand N/A 0 (3048mm) Left Hand N/A Right Hand N/A (3353mm) Left Hand N/A Right Hand N/A Item : 00 Guide Length End Guide End Guide (3658mm) Left Hand N/A Right Hand N/A 3 (396mm) Left Hand Right Hand (467mm) Left Hand Right Hand (457mm) Left Hand Right Hand (4877mm) Left Hand Right Hand (58mm) Left Hand Right Hand (5486mm) Left Hand Right Hand Dorner Mfg. Corp Rev. I

37 (5mm) Cleated Belt Guiding Service Parts For Conveyors For 3 8 Conveyors Guide Retaining Clip See Chart Below 00 Guide.3 Cleated M Drop In Tee Bar M Socket Head Screw M6 x 0mm Item : 00 Guide Length End Guide End Guide (60mm) Left Hand N/A Right Hand N/A 3 (94mm) Left Hand N/A Right Hand N/A 4 (9mm) Left Hand N/A Right Hand N/A 5 (54mm) Left Hand N/A Right Hand N/A 6 (89mm) Left Hand N/A Right Hand N/A 7 (34mm) Left Hand N/A Right Hand N/A 8 (438mm) Left Hand N/A Right Hand N/A 9 (743mm) Left Hand N/A Right Hand N/A 0 (3048mm) Left Hand N/A Right Hand N/A (3353mm) Left Hand N/A Right Hand N/A Item : 00 Guide Length End Guide End Guide (3658mm) Left Hand N/A Right Hand N/A 3 (396mm) Left Hand Right Hand (467mm) Left Hand Right Hand (457mm) Left Hand Right Hand (4877mm) Left Hand Right Hand (58mm) Left Hand Right Hand (5486mm) Left Hand Right Hand Rev. I 37 Dorner Mfg. Corp.

38 Service Parts Flared Side Guiding Guide Retaining Clip 0 Side Flare Mounting Guide (60mm) 03 Side Flare Mounting Guide 3 (94mm) 04 Side Flare Mounting Guide 4 (9mm) 05 Side Flare Mounting Guide 5 (54mm) 06 Side Flare Mounting Guide 6 (89mm) 3 05M Flared Guide 45 (60mm) 053M Flared Guide 45 3 (94mm) 053M Flared Guide 45 4 (9mm) 053M Flared Guide 45 5 (54mm) 053M Flared Guide 45 6 (89mm) Drop In Tee Bar M Button Head Screw M5 x 6mm Washer M Cap Low Head Screw M6 x 0mm Dorner Mfg. Corp Rev. I

39 Flat Belt Stand Mount Assembly Service Parts Stand Mount 30050M Drop In Tee Bar P Washer Square Nut M M Socket Head Screw M6 x 0mm M Socket Low Head Screw M6xmm Flat Belt Stand Mount Assembly Cleated Belt Stand Mount Assembly Cleated Mount Assembly 30050M Drop In Tee Bar P Washer Square Nut M M Socket Head Screw M6 x 0mm M Socket Low Head Screw M6xmm Cleated Stand Mount Assembly Rev. I 39 Dorner Mfg. Corp.

40 Service Parts Flat Belt Stand Mount Assembly for (60mm) Conveyors Stand Mount, LH (60mm) Stand Mount, RH (60mm) P Washer M Drop In Tee Bar Square Nut M M Socket Head Screw M6 x 0mm M Socket Low Head Screw M6xmm Flat Belt Stand Mount Assembly for (60mm) Conveyors Cleated Belt Stand Mount Assembly for (60mm) Conveyors Cleated Stand Bracket Assembly LH (60mm) Conveyor Cleated Stand Bracket Assembly RH (60mm) Conveyor P Washer M Drop In Tee Bar Square Nut M M Socket Head Screw M6 x 0mm M Socket Low Head Screw M6xmm Cleated Belt Stand Mount Assembly for (60mm) Conveyors Dorner Mfg. Corp Rev. I

3200 Series End Drive Flat and Cleated Belt Conveyors

3200 Series End Drive Flat and Cleated Belt Conveyors 00 Series End Drive Flat and Cleated Belt Conveyors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 0 975 Cottonwood Ave. TEL: -800-97-8664 TEL: 6-67-7600

More information

7200 Series Sanitary End Drive Conveyors

7200 Series Sanitary End Drive Conveyors 7200 Series Sanitary End Drive Conveyors Installation, Maintenance & Parts Manual DORNER MFG. CORP. INSIDE THE USA OUTSIDE THE USA P.O. Box 20 975 Cottonwood Ave. TEL: 1-800-397-8664 TEL: 262-367-7600

More information

2100, 2200, 2300, 4100, 6200, MPB Series Side Mount Drive Package for Standard Load 90 Industrial Gearmotors

2100, 2200, 2300, 4100, 6200, MPB Series Side Mount Drive Package for Standard Load 90 Industrial Gearmotors 00, 00, 300, 400, 600, MPB Series Side Mount Drive Package for Standard Load 90 Industrial Gearmotors Installation, Maintenance & Parts Manual Featuring: Technology DORNER MFG. CORP. INSIDE THE USA OUTSIDE

More information

2200 SERIES COMMON DRIVE PACKAGE Special Capabilities Specification Sheet

2200 SERIES COMMON DRIVE PACKAGE Special Capabilities Specification Sheet 975 Cottonwood Ave., PO Box 20, Hartland, Wisconsin 53029-0020, USA www.dorner.com info@dorner.com COMMON DRIVE CONVEYOR SETUP Up to (4) conveyors can be coupled together and driven from a single gearmotor.

More information

2200 & 2300 SERIES CONVEYORS

2200 & 2300 SERIES CONVEYORS 2200 & 200 SERIES CONVEYORS FEATURES & BENEFITS CONVEYOR ORDERING INFORMATION 2200/200 SERIES LOW PROFILE BELT CONVEYORS EXTRUDED ALUMINUM 2200 Series 200 Series General Specifications: idrive, Flat Belt

More information

Belt Tensioning Methods for Small Package Conveyors What s the best solution?

Belt Tensioning Methods for Small Package Conveyors What s the best solution? Belt Tensioning Methods for Small Package Conveyors What s the best solution? Industrial White Paper By: Michael A. Hosch, P.E. Dorner Mfg. Corp. 975 Cottonwood Avenue Hartland, WI 53029 USA Phone: 800

More information

Best/Flex Roller Expandable Conveyor

Best/Flex Roller Expandable Conveyor Best Diversified Products Ltd. Best/Flex Roller Expandable Conveyor Product Manual Best Diversified Products Ltd. Brunel Road, Earlstrees Industrial Estate Corby, Northants. NN17 4JW Tel: +44(0) 1536 206969

More information

ROTARY TUMBLER INSTRUCTIONS AND PARTS LIST

ROTARY TUMBLER INSTRUCTIONS AND PARTS LIST ROTARY TUMBLER INSTRUCTIONS AND PARTS LIST Model QT66 Model QT12 Model QT6 LORTONE 12130 Cyrus Way Mukilteo, WA 98275 (425) 493-1600 SETTING UP YOUR MACHINE Install The Barrel Guide: Using the machine

More information

ROTARY TUMBLER INSTRUCTIONS AND PARTS LIST

ROTARY TUMBLER INSTRUCTIONS AND PARTS LIST ROTARY TUMBLER INSTRUCTIONS AND PARTS LIST Model 3-1.5B Model 45C Model 33B LORTONE 12130 Cyrus Way Mukilteo, WA 98275 (425) 493-1600 SETTING UP YOUR MACHINE For 45C Unit Only (33B & 3-1.5B already assembled)

More information

Owner s Manual Read and keep this manual. Patents World Wide

Owner s Manual Read and keep this manual. Patents World Wide Owner s Manual Read and keep this manual. Patents World Wide S & S Industries, Inc., Sarasota, FL, USA www.trail-gator.com Copyright 2008 All Rights Reserved The following manual is provided to assist

More information

1-800-295-5510 uline.com SPECIFICATIONS

1-800-295-5510 uline.com SPECIFICATIONS H-1394, H-1395, H-1396 H-1397, H-3859, H-3860 π GRAVITY CONVEYOR 1-800-295-5510 uline.com SPECIFICATIONS Conveyor Bed Width In (mm) 18, 24, 30 (457, 610, 762) Load Capacity Per Linear Foot (305mm) Lbs

More information

WARNING! DO NOT ATTEMPT TO INSTALL THIS KIT IN A POWERED CONVEYOR.

WARNING! DO NOT ATTEMPT TO INSTALL THIS KIT IN A POWERED CONVEYOR. Model: Document Number: 64058111 Kit Number: 64058112 Revision: 02 Description: Release Date: 04/08 Introduction This kit allows a PS90 scale to be integrated into a standard gravity conveyor. The kit

More information

MEASURING WHEEL ALIGNMENT

MEASURING WHEEL ALIGNMENT MEASURING WHEEL ALIGNMENT 2003-04 WHEEL ALIGNMENT Specifications & Procedures - Hummer - H2 Steering and vibration complaints are not always the result of improper alignment. One possible cause is wheel

More information

16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1

16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1 16 April 2012 1032011-F 1994-2002 Dodge Adjustable Track bar with Relocation Bracket 1 BD Adjustable Track Bar w/bracket Dodge 2500-3500 4WD Models 1994-2002 Dodge 1500 4WD Model 1994-2001 P/N# 1032011-F

More information

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family

More information

Cable Drum Installation

Cable Drum Installation 20 Cable Drum Installation COUNTERBALANCE None Shake the TorqueMaster spring tube gently to extend the winding shafts out about 5" on each side. For single spring applications, there will be no left hand

More information

For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com.

For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. Information contained in this publication is subject to change at anytime

More information

SERVICE GUIDE For WARN PULLZALL 120v AC &100v AC P/N 685000 & 685001

SERVICE GUIDE For WARN PULLZALL 120v AC &100v AC P/N 685000 & 685001 SERVICE GUIDE For WARN PULLZALL 120v AC &100v AC P/N 685000 & 685001 REPAIR / REPLACEMENT INSTRUCTIONS TROUBLE SHOOTING GUIDE 986765A2.doc Page 1 of 50 WARNING This guide identifies potential hazards and

More information

Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997

Char-Lynn Hydraulic Motor. Repair Information. 10 000 Series. October, 1997 Char-Lynn Hydraulic Motor October, 1997 Repair Information Geroler Motor Two Speed 001 27 Retainer inside bore of valve plate bearingless motors only 4 15 16 3 6 35 Parts Drawing 25 2 2 1 19 17 36 40 47

More information

758 Heavy-duty Ratchet Guy Wire Cutter

758 Heavy-duty Ratchet Guy Wire Cutter INSTRUCTION MANUAL 758 Heavy-duty Ratchet Guy Wire Cutter Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. Register this product

More information

SLACK PERFORMANCE KARTS

SLACK PERFORMANCE KARTS SLACK PERFORMANCE KARTS SET UP GUIDE Thank you for purchasing a 2013 Slack Axiom Chassis. Performance Mfg. strives to provide you with the very best chassis and components on the market today. Your satisfaction

More information

OWNER S MANUAL Table Tennis Table Patent Pending

OWNER S MANUAL Table Tennis Table Patent Pending OWNER S MANUAL Table Tennis Table Patent Pending Be sure to write your model number and serial number here for future reference. You can find these numbers printed on the bottom of the table. MODEL # T8179

More information

FJ2. 2 Ton Trolley Floor Jack Assembly & Operating Instructions

FJ2. 2 Ton Trolley Floor Jack Assembly & Operating Instructions FJ2 2 Ton Trolley Floor Jack Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper operation & maintenance.

More information

ATS Overhead Table Shelf System INSTRUCTION MANUAL

ATS Overhead Table Shelf System INSTRUCTION MANUAL ATS Overhead Table Shelf System INSTRUCTION MANUAL ATS Overhead Table Shelf System Instruction Manual Warranty Newport Corporation warrants this product to be free of defects in material and workmanship

More information

STEERING SYSTEM - POWER

STEERING SYSTEM - POWER STEERING SYSTEM - POWER 1990 Nissan 240SX 1990 STEERING Nissan - Power Rack & Pinion Axxess, Maxima, Pulsar NX, Sentra, Stanza, 240SX, 300ZX DESCRIPTION The power steering system consists of a rack and

More information

Auto Sentry-eXP Maintenance

Auto Sentry-eXP Maintenance Auto Sentry-eXP Maintenance Maintenance Procedures for Auto Sentry exp Bill Dispenser Credit Card Reader Bill Acceptor Bill Dispenser Maintenance Bill Dispenser Problem / Cause Bill Dispenser Error Codes

More information

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12" DUAL BEVEL COMPOUND MITER SAW B27A

SERVICE PARTS LIST PAGE 1 OF 6 BASE ASSEMBLY SPECIFY CATALOG NO. AND SERIAL NO. WHEN ORDERING PARTS 12 DUAL BEVEL COMPOUND MITER SAW B27A PAGE 1 OF 6 BASE ASSEMBLY 00 0 EXAMPLE: Component Parts (Small #) Are Included When Ordering The Assembly (Large #). SPECIFY CATALOG NO. AND NO. WHEN ORDERING PARTS 1 02-80-0050 Thrust Bearing (1) 2 05-80-0510

More information

6 inch A-Arm Lift Kit WARNING: 16-018/16-019. installation instructions. will fit CLUB CAR DS. included:

6 inch A-Arm Lift Kit WARNING: 16-018/16-019. installation instructions. will fit CLUB CAR DS. included: Revised May 205 6-08/6-09 6 inch A-Arm Lift Kit will fit CLUB CAR DS installation instructions included: Rear Lift Blocks Main Suspension Assembly Spindles A-Arms Rear Shock Mounting Plates U-Bolts WARNING:

More information

HOME GYM. Model. Retain This Manual for Reference OWNER'S MANUAL. www.hyper-extension.com

HOME GYM. Model. Retain This Manual for Reference OWNER'S MANUAL. www.hyper-extension.com NOTE: Please read all instructions carefully before using this product Table of Contents Safety Notice www.hyper-extension.com HOME GYM 50036 Hardware Identifier Assembly Instruction Parts List Warranty

More information

IMPORTANT DOCUMENTATION DO NOT DISCARD!

IMPORTANT DOCUMENTATION DO NOT DISCARD! PART NO.: 6441-263C SERIES GRT 3 JAW PARALLEL GRIPPERS INFORMATION SHEET IMPORTANT DOCUMENTATION DO NOT DISCARD! Use this information sheet to assist with gripper installation and setup. File with maintenance

More information

Belt Conveyor Tracking V-Guide vs. Crowned Roller

Belt Conveyor Tracking V-Guide vs. Crowned Roller Belt Conveyor Tracking V-Guide vs. Crowned Roller By: Michael A. Hosch P.E. Dorner Mfg. Corp. 1 One of the largest maintenance issues associated with belt conveyors is belt tracking. Belt tracking is the

More information

KEYPAD LOCK RETROFIT KIT

KEYPAD LOCK RETROFIT KIT KEYPAD LOCK RETROFIT KIT INSTRUCTIONS FOR ASSEMBLY IMPORTANT READ & SAVE THESE INSTRUCTIONS Tools Required for Assembly 5/32 hex (Allen) wrench #2 Phillips screwdriver Isopropyl alcohol or alcohol wipes

More information

Trillium 40 Axis Spring Tensioner Wire Replacement Instructions

Trillium 40 Axis Spring Tensioner Wire Replacement Instructions Trillium 40 Axis Spring Tensioner Wire Replacement Instructions 1 Overview The objective is to replace the broken axis spring tensioner wire. This requires the following tasks: 1. Remove the seismometer

More information

Wiper Motor Marinco 2.5. Installation Instructions

Wiper Motor Marinco 2.5. Installation Instructions Wiper Motor Marinco 2.5 Installation Instructions Wiper Motor Marinco-2.5 The Marinco 2.5 Wiper Motor Offers the Following Features: Fully sealed base and housing which allows installation in outdoor wet

More information

Front axle components, overview

Front axle components, overview just a test. Front axle components, overview 40-1 General Information Load bearing components and parts of the suspension must not be welded or straightened. Vehicles without drive axle must not be moved,

More information

Owner s Manual Gantry Cranes

Owner s Manual Gantry Cranes Owner s Manual Gantry Cranes Fixed Height Gantry Crane MODEL NUMBER: SERIAL NUMBER: CAPACITY IN TONS: Telescoping Gantry Crane Bushman AvonTec 262-790-4200, 800338-7810, Fax 262-790-4200 www.bushmanavontec.com

More information

3. Loosen 3 x grub screws in the Dec end cap and unscrew the cap and counterweight shaft. NEQ6 Belt Modification Kit.

3. Loosen 3 x grub screws in the Dec end cap and unscrew the cap and counterweight shaft. NEQ6 Belt Modification Kit. NEQ6 Belt Modification Kit. Thank you for your purchase. Please read these instructions fully before fitting. Your package should contain 2 off 47 & 2 off 12 tooth aluminium pulleys 2 off belts 6mm wide

More information

INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks

INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate Locks Securitron Magnalock Corp. www.securitron.com ASSA ABLOY, the global leader Tel 800.624.5625 techsupport@securitron.com in door opening solutions INSTALLATION AND OPERATING INSTRUCTIONS For Model GL1 Gate

More information

For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com.

For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. 2 0 0 5 D U K E A I R X C / S L / R A C E S E R V I C E G U I D E Information

More information

S&G Model 2937 Group 1 Combination Lock

S&G Model 2937 Group 1 Combination Lock Installation and Combination Changing Instructions S&G Model 2937 Group 1 Combination Lock NOTE: READ COMPLETE INSTRUCTIONS BEFORE INSTALLATION These instructions should be followed when installing the

More information

2011-14 F250 6 RADIUS ARM KIT

2011-14 F250 6 RADIUS ARM KIT 92154000 Thank you for choosing Rough Country for your suspension needs. 2011-14 F250 6 RADIUS ARM KIT Rough Country recommends a certified technician installs this system. In addition to these instructions,

More information

SERVICE MANUAL. Corpus 3G. Seat system for electric wheelchair

SERVICE MANUAL. Corpus 3G. Seat system for electric wheelchair SERVICE MANUAL US Corpus 3G Seat system for electric wheelchair How to contact Permobil Head Office of the Permobil group Produced and published by Permobil AB, Sweden Version 4, 2014-07 Item No.: 205260-US-0

More information

Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors

Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors Installation Manual Elo Touch Solutions Wall-mounting Kit for the 5501L IDS Touchmonitors SW602206 Rev B Table of Contents Chapter 1: Safety Warning... 3 Chapter 2: Kit Contents... 4 Included in Kit...

More information

1993 SUSPENSION Volkswagen Front. EuroVan

1993 SUSPENSION Volkswagen Front. EuroVan Article Text ARTICLE BEGINNING 1993 SUSPENSION Volkswagen Front EuroVan DESCRIPTION FWD independent suspension is an double-wishbone type with torsion bars mounted on upper control arm. Wheel is supported

More information

Pulleys and Belt. Install the Major Accessory and Pulley. Install the Motor Pulley NOTE. Align the Motor Pulley and the Tool Pulley NOTE

Pulleys and Belt. Install the Major Accessory and Pulley. Install the Motor Pulley NOTE. Align the Motor Pulley and the Tool Pulley NOTE Pulleys and Belt Pulley Guard - 505862 Install the Major Accessory and Pulley 1. Place the short end of the mounting base holes, and insert - but don t tighten - the setscrews. If the Major Accessory has

More information

AXLE SHAFTS - FRONT. 1998 Pontiac Bonneville MODEL IDENTIFICATION DESCRIPTION & OPERATION TROUBLE SHOOTING REMOVAL & INSTALLATION

AXLE SHAFTS - FRONT. 1998 Pontiac Bonneville MODEL IDENTIFICATION DESCRIPTION & OPERATION TROUBLE SHOOTING REMOVAL & INSTALLATION AXLE SHAFTS - FRONT 1998 Pontiac Bonneville 1998-99 DRIVE AXLES FWD Axle Shafts - Cars - "C", "G" & "H" Bodies GM Aurora, Bonneville, Eighty Eight, LeSabre, LSS, Park Avenue, Regency, Riviera MODEL IDENTIFICATION

More information

4 in 1 Strength Station

4 in 1 Strength Station Revision 0 September 2010 4 in 1 Strength Station Owner s Manual Record Serial Number Here Platinum by Tunturi www.tunturi.com Date www.tunturi.com of Purchase 4 in 1 Strength Station Owner s Manual Instructions

More information

POWER LOCK KIT GENERAL INSTALLATION -J04427 REV. 2007-12-04. Kit Number. Models. Additional Parts Required. Kit Contents

POWER LOCK KIT GENERAL INSTALLATION -J04427 REV. 2007-12-04. Kit Number. Models. Additional Parts Required. Kit Contents -J0 REV. 00--0 POWER LOCK KIT GENERAL Kit Number -0, 0-0 Models For model fitment information, please see the P&A Retail Catalog or the Parts and Accessories section of www.harleydavidson.com (English

More information

Rebuild Instructions for 70001 and 70010 Transmission

Rebuild Instructions for 70001 and 70010 Transmission Rebuild Instructions for 70001 and 70010 Transmission Brinn, Incorporated 1615 Tech Drive Bay City, MI 48706 Telephone 989.686.8920 Fax 989.686.6520 www.brinninc.com Notice Read all instructions before

More information

MODEL T10023 ACCESSORY KIT #1 FOR T10010/T10097 WET GRINDER

MODEL T10023 ACCESSORY KIT #1 FOR T10010/T10097 WET GRINDER MODEL T0023 ACCESSORY KIT # FOR T000/T0097 WET GRINDER INSTRUCTION SHEET Introduction The Model T0023 Accessory Kit # for the Model T000/T0097 Wet Grinder includes fixtures for sharpening small knives,

More information

1000-LB. TRAILER JACK OWNER S MANUAL

1000-LB. TRAILER JACK OWNER S MANUAL 1000-LB. TRAILER JACK OWNER S MANUAL WARNING: Read carefully and understand all INSTRUCTIONS before operating. Failure to follow the safety rules and other basic safety precautions may result in serious

More information

Front brakes (FN- 3), servicing

Front brakes (FN- 3), servicing j a t Front brakes (FN- 3), servicing 46-1 Front brakes, servicing Note: Install complete repair kit. After replacing brake pads and before moving vehicle, depress brake pedal several times firmly to properly

More information

UFO 1 FOLDER INDEX A2 FOLDING MACHINE TYPE 10060 LIST NO DESCRIPTION PAGE 10101M Main Assembly - Mechanical 2 10201M Main Roller Assembly 4 16101M Upper & Lower Perforator Shaft Assembly 6 12701M Primary

More information

SELF-STEERING AXLE TABLE OF CONTENTS

SELF-STEERING AXLE TABLE OF CONTENTS SELF-STEERING AXLE TABLE OF CONTENTS Section 1 - Introduction Section 2 - Pre-Installation Check List Section 3 - Ride Height Adjustments Section 4 - Suspension Mount Section 5 - Axle Mount Section 6 -

More information

Step-by-step instructions:

Step-by-step instructions: Spark plug thread repair for Ford Triton cylinder heads Step-by-step instructions: Identification Installation Verification Specifically designed and tested for 4.6L, 5.4L, and 6.8L 2 and 4 valve heads,

More information

Service Manual Rol-Lift

Service Manual Rol-Lift R 2000 Service Manual Rol-Lift Series: T and E Developed by Generic Parts Service This manual is intended for basic service and maintenance of the Rol-Lift pallet jack. The pallet jacks you are servicing

More information

ROTOR LOADER OWNER S MANUAL

ROTOR LOADER OWNER S MANUAL ROTOR LOADER OWNER S MANUAL ROTOR LOADER OWNER S MANUAL WARNING IMPORTANT SAFETY INSTRUCTIONS AND GUIDELINES. Misuse of paintball equipment may cause serious injury or death. QUICK SET-UP GUIDE BATTERY

More information

Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation

Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...

More information

Table of Contents WARNING SYMBOLS AND DEFINITIONS

Table of Contents WARNING SYMBOLS AND DEFINITIONS Table of Contents SAFETY INSTALLATION OPERATION MAINTENANCE Safety... 2 Specifications... 4 Installation... 5 Operation... 8 WARNING SYMBOLS AND DEFINITIONS Maintenance... 9 Parts List and Assembly Diagram...

More information

DANA 30 MANUAL HUB CONVERSION KIT

DANA 30 MANUAL HUB CONVERSION KIT DANA 30 MANUAL HUB CONVERSION KIT 12194 PLEASE READ AND UNDERSTAND ALL INSTRUCTIONS BEFORE YOU BEGIN Your safety and the safety of other motorists is very important. Your Jeep is an off road capable vehicle

More information

Depending on which elastic support you have you can secure the V2 power unit to the following seat bracket tubes: EXTERNAL DIAMETER 27.

Depending on which elastic support you have you can secure the V2 power unit to the following seat bracket tubes: EXTERNAL DIAMETER 27. ASSEMBLY 1 - EPS V2 POWER UNIT (SOLUTION 5) 1.1 - POSITIONING INSIDE THE SEAT TUBE WITH ELASTIC SUPPORT IN THE SEAT BRACKET TUBE Depending on which elastic support you have you can secure the V2 power

More information

Drive shaft, servicing

Drive shaft, servicing Volkswagen Passat B6 - Drive shaft, servicing Стр. 1 из 41 40-7 Drive shaft, servicing Drive shafts, overview I - Assembly overview: Drive axle with CV joint VL100 40-7, Drive axle with CV joint VL100,

More information

Express5800/120Ed. Rack Mount Kit Installation Procedures PN: 455-01607-001

Express5800/120Ed. Rack Mount Kit Installation Procedures PN: 455-01607-001 Express5800/120Ed Rack Mount Kit Installation Procedures PN: 455-01607-001 Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related materials,

More information

Assembly and Usage Instructions

Assembly and Usage Instructions Assembly and Usage Instructions A Product 5885 West Van Horn Tavern Road Columbia, MO 65203 www.caldwellshooting.com Instruction #1001667 Limited Warranty Every Caldwell product is warrantied to be free

More information

TERMINATION EQUIPMENT INSTRUCTION MANUAL TELE-PIERCE P/N 356-246

TERMINATION EQUIPMENT INSTRUCTION MANUAL TELE-PIERCE P/N 356-246 TERMINATION EQUIPMENT INSTRUCTION MANUAL TELE-PIERCE P/N 356-246 OPERATION AND SERVICE INSTRUCTIONS AMPHENOL 157 SERIES TELE-PIERCE MULTI-WIRE TERMINATION TOOL 356-246 AMPHENOL TERMINATION SYSTEMS 1830

More information

SAFETY & OPERATING INSTRUCTIONS

SAFETY & OPERATING INSTRUCTIONS SAFETY & OPERATING INSTRUCTIONS EDLUND TOMATO LASER, Models ETL -316, -140 & -380 READ AND UNDERSTAND THIS MANUAL AND ALL INSTRUCTIONS BEFORE OPERATING THIS SLICER. 159 Industrial Parkway, Burlington,

More information

TABLE OF CONTENTS. I. TROUBLESHOOTING... 2 - Section 1.01: Common Problems/Solutions... 2

TABLE OF CONTENTS. I. TROUBLESHOOTING... 2 - Section 1.01: Common Problems/Solutions... 2 BAL Accu-Slide System I. Table of Contents TABLE OF CONTENTS I. TROUBLESHOOTING... 2 - Section 1.01: Common Problems/Solutions... 2 II. GETTING STARTED... 5 - Section 2.01: Tools You Will Need... 5 - Section

More information

Installation Manual. SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks)

Installation Manual. SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks) Installation Manual SKU# 21000 series (Base Rails) SKU# 22000 series (Overhead Racks) Welcome to the world of TracRac! We re delighted that you have chosen TracRac, the ultimate sliding truck rack system.

More information

Small Flat Panel Lift Arm FSA-1004 and KSA-1004

Small Flat Panel Lift Arm FSA-1004 and KSA-1004 I N S T A L L A T I O N I N S T R U C T I O N S Small Flat Panel Lift Arm FSA-1004 and KSA-1004 The Lift Arm is an accessory that can be used with a broad range of Small Flat Panel Displays. The allows

More information

CUSTOM AUXILIARY FORWARD LIGHTING KIT

CUSTOM AUXILIARY FORWARD LIGHTING KIT -J0 REV. 0--0 CUSTOM AUXILIARY FORWARD LIGHTING KIT GENERAL Kit Number -0, 0000 Models This Custom Auxiliary Lighting Kit adds lamps and turn signals to 00 and later FLHX model motorcycles. Additional

More information

Speed-Mat Rectangle Cutter

Speed-Mat Rectangle Cutter Speed-Mat Rectangle Cutter 1 Honeycomb baseboard. 2 Left hold down. 14 3 Bottom hold down. 4 4 Left / right rule. 8 5 8 5 Left / right rule pointer. 1 6 Top / bottom rule. 7 Top / bottom rule pointer.

More information

MBSAW. Meat Cutting Band Saw With Meat Grinder Assembly & Operating Instructions

MBSAW. Meat Cutting Band Saw With Meat Grinder Assembly & Operating Instructions 06/2011 MBSAW Meat Cutting Band Saw With Meat Grinder Assembly & Operating Instructions READ ALL INSTRUCTIONS AND WARNINGS BEFORE USING THIS PRODUCT. This manual provides important information on proper

More information

Pallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification

Pallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product

More information

PRODUCT: WASHER / WASHER-DRYER COMBO MODEL: AW 120 / AW 122 / AW 125 AWD 120 / AWD 121 / AWD 129

PRODUCT: WASHER / WASHER-DRYER COMBO MODEL: AW 120 / AW 122 / AW 125 AWD 120 / AWD 121 / AWD 129 PRODUCT: WASHER / WASHER-DRYER COMBO MODEL: The information included in this Splendide Repair Manual may change without notice. Please see our web site www.splendide.com/service/docs.html for updates,

More information

CAR SEAT/ STROLLER INSTRUCTION MANUAL

CAR SEAT/ STROLLER INSTRUCTION MANUAL CAR SEAT/ STROLLER INSTRUCTION MANUAL English PM-0624AB 3/98 Do not use this 4-in-1 System until you read and understand these instructions! IMPORTANT INFORMATION Thank you for selecting this 4-in-1 System

More information

ARTICLE BEGINNING APPLICATION IDENTIFICATION DESCRIPTION LUBRICATION & ADJUSTMENT TROUBLE SHOOTING. MANUAL TRANSMISSIONS Saab 5-Speed Transaxle

ARTICLE BEGINNING APPLICATION IDENTIFICATION DESCRIPTION LUBRICATION & ADJUSTMENT TROUBLE SHOOTING. MANUAL TRANSMISSIONS Saab 5-Speed Transaxle Article Text ARTICLE BEGINNING MANUAL TRANSMISSIONS Saab 5-Speed Transaxle APPLICATION TRANSMISSION APPLICATION ÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄÄ Vehicle Application Transmission

More information

Best/Flex Gravity Expandable Conveyor Operation, Maintenance and Parts Manual

Best/Flex Gravity Expandable Conveyor Operation, Maintenance and Parts Manual Best/Flex Gravity Expandable Conveyor Operation, Maintenance and Parts Manual B/F200 & B/F300 SERIES LongReach Telescopic Conveyors Pty Ltd 6 Capelli Road Wingfield SA 5013 Tel: +61 (8) 8349 4777 Fax:

More information

TOYOTA Tundra 2007 - BACK-UP CAMERA SYSTEM Preparation

TOYOTA Tundra 2007 - BACK-UP CAMERA SYSTEM Preparation Preparation Part Number(s): PT233-34070, PT923-35070-11, PT923-35070-43 NOTE: Part number of this accessory may not be the same as part number shown. Back Up Monitor Kit Contents PT923-35070-11 / PT923-35070-43

More information

Rating when used as a weight carrying hitch without spring bars:

Rating when used as a weight carrying hitch without spring bars: BOLT-TOGETHER WEIGHT DISTRIBUTING HITCH SYSTEM Rating when used as a weight distributing hitch with spring bars: Part Number 48051 4805 48053 48054 Max Tongue Weight 550 Ibs. 750 Ibs. 1000 Ibs. 1400 lbs.

More information

Resharpening Companion

Resharpening Companion Resharpening Companion 10950 Correct Angles, Pictures, and Step-By-Step Instructions The Resharpening Companion is meant to be a guide and quick reference to help you resharpen. It is not meant to replace

More information

GUTTER MACHINE CONTROLS STANDARD

GUTTER MACHINE CONTROLS STANDARD GUTTER MACHINE CONTROLS STANDARD Note: determine what type of control package is installed on the machine. --more-- All operators should familiarize themselves with the appropriate controls prior to any

More information

AZEK Rail Install Guide

AZEK Rail Install Guide TRIM MOULDING DECK PORCH RAIL PAVERS AZEK Rail Install Guide Installing AZEK Rail with CableRail by Feeney... 1 Installing CableRail by Feeney for AZEK Rail... 7 Installing AZEK Rail Stairs with CableRail

More information

Rear wheel brakes, servicing. Стр. 1 из 45. Note:

Rear wheel brakes, servicing. Стр. 1 из 45. Note: Volkswagen Touareg - Rear wheel brakes, servicing Стр. 1 из 45 46-2 Rear wheel brakes, servicing Rear brakes, FN 44 brake caliper, servicing Note: After replacing brake pads, depress brake pedal firmly

More information

2006 JUDY SERVICE GUIDE

2006 JUDY SERVICE GUIDE 2006 JUDY SERVICE GUIDE For exploded diagram and part number information, refer to the Spare Parts Catalog available on our website at www.rockshox.com. Information contained in this publication is subject

More information

Vinyl Brick Mould Field Installation Instructions All Vinyl and Vinyl Clad Windows

Vinyl Brick Mould Field Installation Instructions All Vinyl and Vinyl Clad Windows Vinyl Brick Mould Field Installation Instructions All Vinyl and Vinyl Clad Windows Viewed from the exterior. IMPORTANT: Please read before you begin installation. TABLE OF CONTENTS AND TOOL / MATERIAL

More information

DETACHABLE WINDSHIELD AND DOCKING HARDWARE KIT

DETACHABLE WINDSHIELD AND DOCKING HARDWARE KIT -J00 REV. 00-- DETACHABLE WINDSHIELD AND DOCKING HARDWARE KIT GENERAL Kit Number -A, 0-, -, 0-, -, - 0, -0 Models These kits fit and later FXST, FXSTB, FXSTC, and and later FXDWG Harley-Davidson model

More information

Rack installation instructions

Rack installation instructions Rack installation instructions Review the documentation that comes with the rack cabinet for safety and cabling information. Before you install the server in a rack cabinet, review the following guidelines:

More information

Andersen Electric Window Opener for Andersen Awning and Roof Windows

Andersen Electric Window Opener for Andersen Awning and Roof Windows W A Electric Window Opener Electric Window Opener for Awning and Roof Windows Congratulations! You have just purchased one of the many fine products. For ease of installation and continued enjoyment of

More information

Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 46 Brakes - Mechanical Components (Page GR-46)

Volkswagen Jetta, Golf, GTI 1999, 2000 Brake System 46 Brakes - Mechanical Components (Page GR-46) 46 Brakes - Mechanical Components (Page GR-46) Front brakes Brake pads, removing and installing Brake pads, removing and installing FN 3 brake caliper, servicing FS III brake caliper, servicing Rear wheel

More information

880 HYDRAULIC BENDER

880 HYDRAULIC BENDER OPERATION, SERVICE AND PARTS INSTRUCTION MANUAL 880 HYDRAULIC BENDER Read and understand this material before operating or servicing this tool. Failure to understand how to safely operate this tool could

More information

ASSEMBLY DIAGRAM AND ASSEMBLY REFERENCE ULTIMA OLD SCHOOL 2 EVO & TC BELT DRIVE UNITS

ASSEMBLY DIAGRAM AND ASSEMBLY REFERENCE ULTIMA OLD SCHOOL 2 EVO & TC BELT DRIVE UNITS ASSEMBLY DIAGRAM AND ASSEMBLY REFERENCE ULTIMA OLD SCHOOL 2 EVO & TC BELT DRIVE UNITS BELT DRIVE ASSEMBLIES Part# 58-850 2 Old School Belt Drive Assembly - Polished Part# 58-851 2 Old School Belt Drive

More information

Owners & Installation Manual for the Sheridan, Mountainair, Pine Valley and Old Forge Ceiling Fan Family

Owners & Installation Manual for the Sheridan, Mountainair, Pine Valley and Old Forge Ceiling Fan Family Owners & Installation Manual for the Sheridan, Mountainair, Pine Valley and Old Forge Ceiling Fan Family Part of the Kiva Lighting Family Custom Lighting and Fans Since 1992 1312 12th St NW Albuquerque,

More information

Uninterruptible Power Supply. 500 kva - 750 kva

Uninterruptible Power Supply. 500 kva - 750 kva 9 315 Uninterruptible Power Supply 500 kva - 750 kva T1 and T3 Installation Addendum 164201244-001 Rev. A ------------------------------------------------------------------------ ------------------------------------------------------------------------

More information

FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER

FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Aluminess Products Inc 9402 Wheatlands Ct. #A Santee, CA 92071 619-449-9930 FRONT BUMPER INSTALLATION INSTRUCTIONS 2007-2011 DODGE / MERCEDES SPRINTER Please read before beginning Stainless steel hardware

More information

AUTHORISED SERVICE AGENTS: CARBA-TEC Pty. Ltd. 40 Harries Road Coorparoo, QLD 4151 Ph: (07) 3397 2577 Fax: (07) 3397 2785

AUTHORISED SERVICE AGENTS: CARBA-TEC Pty. Ltd. 40 Harries Road Coorparoo, QLD 4151 Ph: (07) 3397 2577 Fax: (07) 3397 2785 UTHORISED SERVICE GENTS: CR-TEC Pty. Ltd. 40 Harries Road Coorparoo, QLD 4151 Ph: (07) 3397 2577 Fax: (07) 3397 2785 CR-TEC (NSW) Pty. Ltd. 32 Percy Street uburn, NSW 2144 Ph: (02) 9649 5077 Fax: (02)

More information

CHAPTER 65 TAIL ROTOR DRIVE SYSTEM. Section Title Page

CHAPTER 65 TAIL ROTOR DRIVE SYSTEM. Section Title Page CHAPTER 65 TAIL ROTOR DRIVE SYSTEM Section Title Page 65-00 Description........................................ 65.1 65-10 Tail Rotor Drive Fan Shaft.............................. 65.1 65-20 Tail Rotor

More information

Table of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19

Table of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19 Table of Contents Overview 1 Pump Disassembly 2 Control Disassembly / Reassembly 7 Pump Reassembly 13 Adjustment Procedures DR Control 19 Adjustment Procedures DRG Control 20 Adjustment Procedures DFR

More information

TONNEAU INSTALLATION GUIDE

TONNEAU INSTALLATION GUIDE TONNEAU INSTALLATION GUIDE Warranty, Care & Maintenance Model 4056 Toyota Tacoma Double Cab 5' Short Bed 2005-Current (With Multi-Track System) EASY AS 1-2-3! NORMAL INSTALLATION TIME 30 MINUTES For Warranty

More information

ROLLING CURTAIN DOOR INSTALLATION, MAINTENANCE & PARTS MANUAL WINDLOCK MODEL 955WL

ROLLING CURTAIN DOOR INSTALLATION, MAINTENANCE & PARTS MANUAL WINDLOCK MODEL 955WL ROLLING CURTAIN DOOR INSTALLATION, MAINTENANCE & PARTS MANUAL WINDLOCK MODEL 955WL Read manual thoroughly prior to installing door. Rolling steel doors are large, heavy objects that move with the help

More information

INSTRUCTION MANUAL AND PARTS LIST MODEL 14-10

INSTRUCTION MANUAL AND PARTS LIST MODEL 14-10 VERTICAL BAND SAWS INSTRUCTION MANUAL AND PARTS LIST MODEL 1-10 DAKE/PARMA WHEN ORDERING PARTS GIVE COMPLETE SERIAL NUMBER OF MACHINE GIVE PART NUMBER AND NAME GIVE AMOUNT REQUIRED Unless the above data

More information