MySpam filtering service Protection against spam, viruses and phishing attacks

Transcription

1 MySpam filtering service Protection against spam, viruses and phishing attacks 1. Introduction This MySpam guide describes the new service and changes to the University s current spam handling procedures. 2. Registering for the MySpam service Once you have received at least one through the MySpam service you can register to set up and manage a full MySpam website account. You will need to register when you first visit the MySpam website. 3. Creating an account on the MySpam Website To create an account on the MySpam website, open your web browser and visit: The MySpam website should appear as shown in Figure 1. Figure 1: MySpam website sign-up screen MySpam filtering service guide 2012/2013 Page 1 of 7

2 Click on the link below the login button that says Click here if you have not yet been issued with your password. A second page will appear asking you to enter your University address. For most staff this will be an address of the form firstname.surname@nottingham.ac.uk, for students it will be of the form username@nottingham.ac.uk 1. Enter your address and click Next. You should see instructions informing you that a confirmation has been sent to your address (to confirm you are the owner). If you receive a warning that your address does not exist, first check you have entered it correctly. If so, then either send yourself an from another internet address (a personal Hotmail, Gmail or Yahoo account for example), or wait until you have received at least one from outside the University before trying to create an account on the website again. The confirmation will be sent to your regular client and will come from mailer-daemon@webroot.com. A sample is shown in Figure 2. Figure 2: Portal sign-up confirmation 1 If you have other addresses at the University which you use in addition to or instead of your main University address (for another University-owned domain or school sub-domain for example), you will need to set up a MySpam website account for each one you use. MySpam filtering service guide 2012/2013 Page 2 of 7

3 Click on the link indicated to activate your MySpam website account. This will bring up the website in a web browser window and ask you to set a password for your account plus a security question and answer. Once completed you may use your MySpam website account at any time by visiting: and entering your address and password Features of the MySpam website Once logged into the MySpam website, you will see a web page similar to the one shown in Figure 3: Figure 3: Website main screen Click on the options on the menu bar to access the following functions: Settings change the password associated with your portal account Allow/Deny create or add to personal allow and deny lists Mail in view your messages that have entered the Webroot service MySpam filtering service guide 2012/2013 Page 3 of 7

4 Virus view any messages quarantined because of viruses Spam view and release any messages quarantined as spam Pending view any messages still being processed prior to delivery Delivery view messages that have passed through the Webroot service Most of the options provided are intuitive to use and so only use of the Allow/Deny and Spam options are described here Spam Review and Release The spam review screen is reached by selecting Spam from the menu bar. An example is shown in Figure 4: Figure 4: Website spam review/release page MySpam filtering service guide 2012/2013 Page 4 of 7

5 MySpam website users can review all messages currently quarantined for their address. Unless released, messages are held in quarantine for 28 days and then deleted. Use the restrict search menu to select the period of time you wish to review. The returned quarantine list is similar to that shown in the spam notification except for the fact that in the website, users may view the contents of the quarantined item by clicking on the Subject link (Figure 4). To release an item from quarantine, select the tick box under the Select column for each item to be released and select one of the buttons: Release Release, allow sender from now on or Release, allow domain from now on These are similar options to the ones provided in the spam notification described in section 3.1 and the same rules apply when deciding which option to choose. If you receive what appears to be legitimate from a sender or an domain you have not corresponded with before and are not familiar with, you are advised to select Release. If legitimate from a known contact is incorrectly quarantined, you are advised to select Release, allow sender from now on. Please think very carefully before selecting the option Release, allow domain from now on. Security compromises can still occur at legitimate and well run organisations like other Universities, business partners or well known internet brands. If you only deal with a small number of contacts from an domain, it is better to add your contacts individually rather than allow the whole domain. Once the appropriate release button has been selected, the selected items will be released from quarantine and forwarded to your regular client Personal Allow/Deny List Your personal allow/deny list can be accessed by selecting Allow/Deny from the menu bar. A sample page is shown in Figure 5. Any addresses (or domains) you have previously allowed through the release options available with the spam notification will be shown on the right hand side of the top half of the web page. MySpam filtering service guide 2012/2013 Page 5 of 7

6 You may add additional items to your allow list by typing them in the box on the top left of the page and clicking the Add to list button to transfer them to the allow list on the right. addresses should generally be of the form A warning will be issued for incorrectly formatted addresses: unable to add xxx to the list too vague. The wildcard character (*) can be included in addresses (e.g. ), however, this type of use is the equivalent of allowing the whole domain and as previous advice has indicated, should be used very carefully. You may add items to your deny list in a similar way to your allow list by entering the details in the bottom left box and clicking the Add to list button to transfer them across. Again wildcards can be used, but should be considered carefully. Addresses can be removed from the allow or deny list by clicking on them in the boxes on the right of the display to highlight them and then clicking the Remove from list button. MySpam filtering service guide 2012/2013 Page 6 of 7

7 Figure 5: Website personal allow/deny page MySpam filtering service guide 2012/2013 Page 7 of 7