Desigo PX Automation system for HVAC and building services

Size: px
Start display at page:

Download "Desigo PX Automation system for HVAC and building services"

Transcription

1 Desigo PX Automation system for HVAC and building services System overview Version 5 Building Technologies

2 Desigo PX Automation system for HVAC and building services Version 5 System overview CM110756en_05 05 Mar / 30 Siemens Building Automation Desigo PX Automation system for HVAC and building services - System description CM110756en_05 05 Mar 2012

3 Table of contents Desigo PX: the scalable automation system...4 Modular design for universal application...4 BACnet communications for maximum openness...4 Made-to-measure operator units...5 A family of programmable automation stations...5 Scope for phased expansion...5 Monitoring, operation and display...6 Alarm management...6 General alarm mechanisms...6 Automatic information for the plant operator:...6 Overview of plant faults...7 Alarm functions...7 Safety aspects...7 Alarm visualization...7 Displaying the plant status...8 Monitoring the plant with trend functions...9 Global data...9 Scheduler/Calendar day programs (for each switching routine)...10 Exception programs...10 Calendar...10 Data access rights Access levels Remote management Operation at the automation level...12 PXM20 network operator units...12 PXM10 operator unit...13 QAX room operator units...13 Web operation with PX-WEB...14 A family of programmable automation stations...16 The compact automation stations...17 Automation stations modular series PXC..D...18 Desigo TX-I/O modules...20 Overview of TX-I/O modules...21 Desigo tools...22 Desigo Xworks Plus...22 Programming with D-MAP...23 Proven application solutions...24 Phased expansion to meet growing needs...25 Expansion with the Desigo Insight management station...25 Expansion with the Desigo RX room automation system...26 Standard applications...26 Integration into the Desigo PX automation level...26 Integration of third-party products...27 Flexible topology...28 Table of contents 05 Mar / 30

4 Desigo PX: the scalable automation system The Desigo PX automation system meets all the requirements associated with the control and monitoring of heating, ventilation, air conditioning systems and other building services. The most striking features of Desigo PX are the scalability of the system with its programmable automation stations and graded range of operator units, and the system's openness. Web client PXM20... BACnet/IP or BACnet/LonTalk TXS1.12F10 TX OPEN PXX-L11 PXX-L12 PXX-PBUS TXM1... PX OPEN PXC50...D PXC100...D PXC200...D PXA40... TXM1... TX-I/O modules TXI1.OPEN PXC00...D PXC50...D PXC100...D PXC200...D PXA30-N... PXA30-W... PXA30-RS... P-Bus TXS1.12F10 TXS1.EF10 TXM1... DC 24 V (max. 64 BE) Third-party devices / systems RXC... Third-party Third-party devices / systems Figure 1 The Desigo PX automation system with operator units Modular design for universal application With its modular design, Desigo PX can be adapted to specific requirements and needs, making cost-effective DDC technology a possibility even in small HVAC systems. Investment costs are limited to those system components that are actually needed. This innovative approach allows phased expansion of Desigo PX into a building automation and control system as and when required. BACnet communications for maximum openness Desigo PX sets new standards in relation to present and future communications technologies. The use of BACnet /LonTalk or BACnet/IP underlines the openness of our systems and our utilization of the latest communications technologies. BACnet opens up the system, to allow easy integration of systems and components from third-party manufacturers. 4 / 30 2BDesigo PX: the scalable automation system 05 Mar 2012

5 Made-to-measure operator units The various operator units in the Desigo PX range more than satisfy all the various requirements in terms of location and function. Web client (PX-WEB) PXM10 and PXM20 operator units QAX room units The plant can be monitored and operated from a Web client via a Web controller. In the event of a fault, the Web controller transmits SMS messages and allows remote diagnostics via Web client. The PXM10 and PXM20 operator units, which can be optimized for different categories of user (e.g. resident engineer), offer users an easy means of checking the operation of the building services plant or of modifying the comprehensive time schedules to take account of changes in occupancy. Room units optimized for building occupants can be used for simple and direct local operation of the plant. In this way, the room temperature in a conference room, for example, can be easily adapted to individual needs. A family of programmable automation stations PXC automation stations The D-MAP programming language With the PXC family of programmable automation stations, Desigo PX offers maximum flexibility in the control and monitoring of building services systems. Comprehensive system functions such as alarm management, time scheduling and trend data storage cover all the requirements associated with the operation of a building. The distributed automation stations, available in two categories, operate autonomously. Communication is via the open BACnet protocol. Professional software tools are available for engineering and other processing of the automation stations. The starting point for the engineering of the program functions is the range of userfriendly application blocks and function blocks in the new programming language D-MAP (Desigo Modular Application Programming). D-MAP is optimized for building services applications and is based on the IEC 1131 standard. The graphical user interface of the software tools ensures an efficient approach. Scope for phased expansion The Desigo PX automation system can be expanded step by step into a full building automation and control system. Desigo Insight Desigo RXC / thirdparty products: Integration via System- Controller Ethernet/IP LAN backbone The Desigo Insight management station offers convenient multi-user operation system wide. It can be connected to Desigo PX via Ethernet/IP, LonTalk / LONWORKS or by modem. Desigo RXC room controllers can be integrated seamlessly into the automation level via the system controllers. Third-party subsystems, such as fire detection systems, intruder protection, lighting or refrigeration plant, can be integrated simply and cost-effectively into Desigo PX. All parts of the plant can be interconnected via router and Ethernet/IP LAN. The automation stations also communicate directly on Ethernet/IP, allowing costeffective use of the existing IT infrastructure for Desigo PX. 2BDesigo PX: the scalable automation system 05 Mar / 30

6 Monitoring, operation and display Alarm management An important factor for the efficient operation of plant is the alarm management system, which ensures early identification of problems in the plant and initiates automatic strategies to help prevent any resulting damage. General alarm mechanisms Desigo PX is based on the BACnet standard. With three types of alarm, Simple, Basic and Extended, the method of handling and acknowledging alarms can be matched to the plant technology. The alarm message is accompanied by vital information which helps the building occupant to locate the cause of the fault. Additional information in text form is automatically added to the alarm message. Alarms are identified with a date and time stamp. Technical staff can see exactly where the alarm originated in which plant, which aggregate and which component. Automatic information for the plant operator: Many building services installations are not continuously monitored by technical staff. This is why Desigo PX automatically transmits alarm messages to a predefined address. Alarm pop-up on PXM20 Alarm message to SMS receiver 6 / 30 3BMonitoring, operation and display 05 Mar 2012

7 Overview of plant faults The plant operator can use the Alarm Viewer function to display all active alarms and their current status. Alarm Viewer in PXM20 Alarm Viewer via PX-WEB Web operation Alarm functions Simple alarm Basic alarm Extended alarm The standard "Simple" alarm triggers certain reactions in the automation station, e.g. equipment is switched off, valves are opened, etc. At the same time, the alarm message is transferred to the specified target operator units and output devices. There is no need for the alarm to be acknowledged by the customer; however, the display or the pop-up window of the operator unit can be deleted. "Basic" alarms are used for important alarms which require the operator to check the cause manually. When an alarm occurs, the automation station triggers the appropriate reactions, such as automatic switch-off, opening of valves, etc. The alarm message is simultaneously saved and transmitted to display units such as local operator units or management stations, as defined in the alarm distribution system. The alarm must be acknowledged. The "Extended" alarms, for safety functions, are an expansion of the basic alarm function. With these alarms, the operator must not only acknowledge the incoming alarm but also, after checking the cause of the alarm and clearing the fault, reset the alarm to return the plant to normal operation. This alarm mechanism offers double security and is especially suitable for safetycritical plant. Safety aspects To avoid the loss of alarms in transit, all transmitted alarms are monitored for transfer and receipt. Any information about faulty transmissions is saved. Alarm visualization When an alarm is displayed, the user can see the relevant information at a glance. The display format is uniform throughout the system. 3BMonitoring, operation and display 05 Mar / 30

8 Displaying the plant status The building operator can obtain an overview of the status of the building services plant at any time, in order to initiate any necessary actions. The overview includes the most important current values, plant status and setpoints. For a quick and simple overview, the building operator can quickly identify the current values in the building services plant from the list of the most important values, and can then initiate the required actions, based on the plant status displayed (e.g. OFF). Alternatively, the building operator can obtain the required information displayed directly in a plant graphic page, via a standard Web client and customer-specific or plant-specific overviews. These graphics-based overviews can also be easily created or customized by the operator. Figure 2 Overview of plant on PXM20 Figure 3 Project-specific plant graphics (overview) displayed on a Web client 8 / 30 3BMonitoring, operation and display 05 Mar 2012

9 Monitoring the plant with trend functions To check the dynamic response of the building services plant, trend functions are provided which the user can set up as required, to monitor critical equipment or to log relevant data for further processing. To do this, the user simply defines which data points are to be monitored and how frequently. The trend functions can also be combined with other system functions. Trend logging can be stopped, for example, at a predefined time or when an alarm event occurs. The logged data is available for analysis at a later date. With the PXM20, the user has a simple means of logging up to five data series and displaying them, two at a time, in graph form. Trend data can be transferred to Desigo Insight. Checking the dynamic response of the plant using the PXM20 Global data Every automation station contains all the data necessary for stand-alone operation. The same applies to shared data such as date/time or calendar information which is identical for several or all automation stations. To avoid having to update changes in parameter settings separately in each automation station, the shared data is treated as "global data" and handled centrally. Scheduler/Calendar The time control of procedures and processes is one of the daily basic functions of a building automation and control system. Ventilation, heating, air conditioning, lighting, door locks etc, are controlled on the basis of opening times and working hours in buildings such as offices, banks, restaurants, department stores and schools. Scheduler programs ensure that lights are switched off automatically at the end of the working day, and that the temperature setpoint in the building is reduced at night. These schedulers can also be used to ensure that offices are not airconditioned during public and works holidays, and that plant is not kept running for longer than necessary. All scheduler programs are directly saved and processed locally at the automation level. Thus full synchronization of individual processes is ensured at all times. 3BMonitoring, operation and display 05 Mar / 30

10 Optimum scheduling helps save energy and extend the life of the plant. In practice, building operators do not exploit this potential to the full, because the time scheduling in their systems is too complex and lacking in clarity. The Desigo operator units display ergonomically designed time schedules which are easy to use. 7-day program on the PXM20 Calendar on the PXM20 7-day programs (for each switching routine) Time-switching profiles over seven days. Ten switching operations possible per day possible (1-minute resolution). Three different output signals digital (on/off); multi-state (e.g. off - stage I - stage II), analog (e.g. 21 C). Exception programs Date, exception and holiday programs to override the 7-day program A maximum of 20 exception profiles, each consisting of 10 switch times Entry of special recurrent exception programs, Example: for a shopping center which remains open until 2000 hours every 3rd Saturday in the month. Overview of all plant parts controlled by this 7-day program. Calendar Display of dates for control of exception profiles. The scheduler programs and calendar are based on the BACnet standard. 10 / 30 3BMonitoring, operation and display 05 Mar 2012

11 Data access rights Access rights provide the convenience of filtering information according to the individual user requirements. This means, for example, that the resident engineer or service engineer only has access to the information actually needed to do the job. A distinction can also be made between read access and write access. Certain users may be able to read a value but not modify it, while other users may have extended access rights, enabling them both to read and to modify values. Information to which a user has no access is not displayed to that user on the PXM20 operator unit. Access levels Within the system there are four basic categories of access, ideally matched to individual user groups. The more experienced the users, the greater the amount of information to which they have read and write access. These access rights can, however, be modified at any time to suit a specific project. Up to seven access levels can be defined. The basic rule is that users with a given access level have access to all values at their own level and at all access levels below their own. Remote management The Desigo system allows the remote management of building services plant, both from a Web client and with the Desigo Insight management station. The following functions are supported: Remote fault and maintenance alarms Remote monitoring and operation of all plant Overview and modification of 7-day programs, calendars and setpoints Modification of operating parameters 11 / 30 3BMonitoring, operation and display 05 Mar 2012

12 Operation at the automation level PXM20 network operator units The PXM20 and PXM20-E network-compatible operator units allows full operation of all Desigo PX automation stations connected to a BACnet network. As a BACnet client, the PXM20/20-E automatically reads the data from the Desigo PX automation stations. It is therefore always up to date and can be replaced while the system is in operation. The operator unit has a high-resolution illuminated display for graphics and text, keys for operation, and a common alarm indicator with an audible signal. The operator unit can be mounted remotely for compact and modular automation stations in the control panel door. The clearly arranged function buttons and fast access buttons ensure correct operation, even by inexperienced users. PXM20 operator unit Time scheduler Alarm overview Online trend Graphics-based display of the heating curve PXM20 / PXM20-E operator functions Alarm monitoring with acknowledgement and visual and User-friendly guidance through audible alarm indication. the plant functions. Data point display and operation of all measured values, Favorites, configurable overview setpoints, plant states, operating states and parameters. of main values in the plant. Graphics-based display and operation of time schedules, Multilevel access protection. exception calendar, online-trend and heating curve. Type summary PXM20 PXM20-E Operator unit for the automation level. Communication via LonTalk Operator unit for the automation level. Communication via IP 12 / 30 3BMonitoring, operation and display 05 Mar 2012

13 PXM10 operator unit The PXM10 operator terminal allows full local operation of a Desigo PXC automation station. The unit incorporates user-friendly "one-button" operation and a high-quality display panel. The PXM10 can be installed remotely in a control panel door to operate compact and modular automation stations, or it can be plugged directly into a modular automation station. PXM10 operator unit Display of setpoints and actual values Alarm display Scheduler PXM10 operator functions Display of measured values, setpoints, plant states and operating modes Setpoint adjustment where required Visual alarm display Alarm display with scope for acknowledgement Graphics-based display of time schedules QAX room operator units Up to five bus-compatible QAX... room devices can be connected to the PPS bus of the automation station. (Exception: only one QAX84.1/PPS2 or QAX90.1 per PPS2). The various options include. Digital display options Status display Plant switching functions QAX32.1 QAX30.1 QAX31.1 QAX32.1 QAX33.1 QAX34.1 QAX84.1/PPS2 2) Function overview QAX30.1 QAX31.1 QAX33.1 QAX34.1 QAX84.1/ QAX90.1 1) QAX91.1 1) QAX34.3 3) PPS2 2) Room temperature sensor Setpoint correction Operating mode switch Fan speed switch LCD display for room temperature, setpoint adjustment and operating mode 1) Wireless room units 2) Flush-mounted room unit 3) One unit per PXC 13 / 30 3BMonitoring, operation and display 05 Mar 2012

14 Web operation with PX-WEB With its integrated Internet technology, the embedded Web server allows full plant option of the automation station using standard Web browsers. The Web server is integrated into the modular automation station PXC00/50/100/200-E.D using the option module PXA40-W.. PXC00/50/100/200.E-D with pluged-in option module PXA40-W.. Operate and monitor via Web client (e.g. touch panel) Main functions of PX-WEB: Operation via Web browser or mobile clients (mobile phone, PocketPC or PDA). Simple plug-and-play functions; no engineering needed. User-friendly guidance through the plant functions. Full access to all measured values, setpoints, plant and operating states, and parameters. Comprehensive data point operation and setpoint entry using clear text. Alarm management via SMS (to specified telephone number) or by . Operation of time schedules, exception calendar and heating curve graphs. Reading of trend data, with the facility to export data to Microsoft Excel for evaluation purposes. Collation of main values via Favorites. Support of multiple level access protection. Additional graphics-based display of plant easy to create and modify. Modem and Ethernet version available. Plant operation Alarm overview PX-WEB type summary PXC0/50/100/200-E.D + PX40-W1 PXC00/50/100/200-E.D + PX40-W0 / W2 Access with Web server via IP, alarms via SMS and , generic Web functions/operation on all connected Desigo PX automation stations of a BACnet network Access with Web server via IP, alarms via SMS and , graphical Web functions/operation on all connected automation stations (for PXA..-W0) or on all Desigo PX automation stations of a BACnet network (for PXA..-W2) 14 / 30 3BMonitoring, operation and display 05 Mar 2012

15 Desigo touch panel The Desigo touch panel ensures convenient operation and display of complex building services plant. With its fast start-up, it is always ready for use. With a Windows CE operating system and a sturdy design requiring neither a hard disk, nor a fan, the touch panel is equally suitable for control panel mounting and room installation. The time required to train staff is less than with conventional technology. Desigo Touchpanel 15 / 30 3BMonitoring, operation and display 05 Mar 2012

16 A family of programmable automation stations There are two series of automation stations in the range: compact and modular. The essential difference between the two series is the flexibility of their data point mix, This strategy ensures optimum adaptability to customer requirements and to the building services plant. A family of programmable automation stations PX automation stations Modular PXC...D Compact PXC... PX system controllers PXC00...D with PXX-L.. PXC00-U with PXA30-K PXC00-U with PXA30-RS HMl automation level Web client x x x x PXM20 x x x x x PXM10 x x x QAX3... x System functions (BACnet) Alarms x x x x x Time schedules x x x x x Trend x x x x x I/O with value objects x x x x x Programming with D-MAP x x x x x I/O subsystem Island bus Direct connection LONWORKS KNX Modbus, M-Bus of I/Os Additional functions Grouping x 16 / 30 4BA family of programmable automation stations 05 Mar 2012

17 The compact automation stations The mounting technique and the fixed configuration of integrated I/Os in the compact series automation stations make them ideal for control of small and distributed plant. The I/Os in these automation stations can be adapted to various types of signal. The automation stations are installed in the control panel. The operator units are connected to BACnet, PPS bus or HMI connection. Automation station PXC22-E.D Plant size I/O: UIO DI DO BACnet/LonTalk PXC12.D PXC22.D PXC236.D BACnet/IP PXC12-E.D PXC22-E.D PXC36-E.D Input and output options UIO Universal inputs, which can be connected to Passive (LG-Ni 1000) and active (DC 0 10 V) sensor elements Binary volt-free contacts, for signaling functions Counters (20 Hz) DI DO Analog outputs for the connection of V actuators Via the program structure, some of the UIOs can also be programmed as binary switch functions and connected to 24 V/20 ma loads (PXC12/22..D: 4 UIOs; PXC36: 6 UIOs) Binary inputs for signaling functions. AC 230 V / 2A relay outputs for binary control. Up to 5 QAX3 room units can be connected to all compact series automation stations. 17 / 30 4BA family of programmable automation stations 05 Mar 2012

18 Automation stations modular series PXC..D The modular series PXC..D automation stations with its free I/O configuration and DIN compliant construction are optimized for panel assembly. It primarily controls and monitors larger items of plant. The flexible TX-I/O modular product range for signaling, measuring, metering, switching and positioning can be seamlessly connect to the automation station. The I/O modules with local manual controls on the module housing provide the plant operator with simple manual operation of the plant directly in the control panel. This local manual control is automatically transmitted as a remote/local signal to the automation station and associated operator units. In an emergency, they operate independently of the automation station, providing stand-alone emergency operation. PXC50/100/200..D modular automation station with connected TX-IO modules Automation stations Automation station overview Connection of TX I/O modules via island bus up to52 data points up to 200 data points More than 200 data points BACnet/LonTalk PXC50.D PXC100.D PXC200.D BACnet/IP PXC50-E.D PXC100-E.D PXC200-E.D System controllers The LonWorks system controllers allow you to connect LonWorks devices such as Desigo RXC room controllers and third-party devices. Overview of system controllers LonWorks PXC00.D System controller with BACnet/LonTalk communication PXC00-E.D System controller with BACnet/IP communcation The automation stations / system controllers supplement room automation with the functions grouping, scheduling, trending, alarming and mapping data points on both BACnet/IP and BACnet/LonTalk. 18 / 30 4BA family of programmable automation stations 05 Mar 2012

19 Option modules The option modules for automation stations assume additional functions such as PX-WEB or remote management together with Desigo Insight. Option modules for automation stations PXC00/50/100/200.D PXA40-T Option module for remote management. Option module overview for automation stations PXC50/100/200-E.D PXA40-T PXA40-W0 PXA40-W1 PXA40-W2 Option module for remote management. PX-WEB option module for IP, remote management, SMS, 1) and alarming with graphics-based Web functions 1) for the automation station fitted with the module. PX-WEB option module for IP, remote management, SMS 1) and alarming with graphics-based Web functions 1) for all automation stations connected to a BACnet network. PX-WEB option module for IP, remote management, SMS 1) and alarming with graphics-based Web functions 1) for all automation stations connected to a BACnet network. 1) One communication type only: Either Desigo Insight PTP or WEB PPP Extension modules The PXX-Lxx extension modules allow connection of LonWorks devices such as Desigo RXC room controllers and third-party devices to the system controller LONWORKS, PXC00 D, as well as to the PXC50/100/200 D automation stations. Extension module overview PXX-L11 PXX-L12 Extension module for up to 60 LONWORKS devices / RXC room controllers (With PXC50...D: up to 10 LONWORKS devices) Extension module for up to 120 LONWORKS devices / RXC room controllers (With PXC50...D: up to 10 LONWORKS devices) The PXX-PBUS extension module allows connection of existing PTM-I/O modules to the PXC50/100/200 D automation stations, which is an optimized solution for the migration of legacy VISONIK and UNIGYR systems. Extension module overview PXX-PBUS Extension module for the integration of PTM-I/O modules together with PXC50 D up to 52 IOs together with PXC100 D up to 200 IOs together with PXC200 D up to 350 IOs 19 / 30 4BA family of programmable automation stations 05 Mar 2012

20 Desigo TX-I/O modules Desigo TX-I/O modules, which provide the interface to the devices at the field level, the sensors and actuators. They communicate with connected Desigo PX modular automation stations and can be interconnected in application-specific configurations. A space-saving, flexible product range of compact TX-I/O modules is available for signalling, measuring, metering, switching and positioning. The I/O module system is DIN compliant in design and optimized for panel mounting and supports decentralized, remote module installations. The TX-I/O modules have LEDs or optional LCD displays with signal and warning display programs to indicate the state of the plant and can be manually or emergency operated depending on the module type. The integrated isolating-terminals facilitate the hardware test carried out during commissioning. The combination of Desigo TX-I/O modules with proven PTM modules within a plant is also possible without a problem. For the user, the advantages of the Desigo TX-I/O modules are as follows: Integrated isolating-terminal feature. Integrated manual controls (optional). Integrated diagnostics functions with LED and optional LCD display. Optimized for HVAC actuators and sensors. DIN compliant construction optimized for panel mounting. Self-connecting bus connection for the easiest possible assembly. Lean, flexible product range for optimized logistics. Clear text module labeling. Tool support for configuration, diagnostics and function test. Third-party integration with Desigo TX Open modules for Modbus, M-bus meters and variable speed drives (Siemens SED2). Desigo TX-I/O modules with integrated isolating terminals and optional manual operation You can integrate third-party integration, for example, pumps (GRUNDFOS, WILO), compact air conditioning units (MENERGA), M-bus meters, and variable speed drives in a decentralized and economic manner. Access to the following information is available, for example, when pumps are connected: Control operating mode Setpoint adjustment Fault and status codes Delivery head Power Speed 20 / 30 5BDesigo TX-I/O modules 05 Mar 2012

21 Overview of TX-I/O modules Type TXM1.8D TXM1.16D TXM1.8U TXM1.8U-ML TXM1.8X TXM1.8X-ML TXM1.6R TXM1.6R-M TXM1.8P TXM1.6RL TXM1.8T Total number of inputs/outputs Functionality Local override LCD panel 3 color I/O status LED Green I/O status LED Digital inputs (DI) N/O or N/C Signal pulse Counter 10 Hz (with debouncing) 1 8 1) Counter 25 Hz (no debouncing) Analog inputs (AI) LG-Ni1000 Pt1000 / Ohm T1 NTC 10K / 100K DC V Ohm ma / ma Pt100 4-wire Analog outputs (AO) DC V ma 5 8 1) 5 8 1) Digital outputs (DO) Permanent contact on/off Permanent contact 4-stage 3-position output Pulse on/off, 3-stage Multistate Triac Permanent contact Triac Pulse (3-stage) Triac Pulse witdth modulation Blinds control Lighting control, bistable 1) Implementation on these I/O points 21 / 30 5BDesigo TX-I/O modules 05 Mar 2012

22 Desigo tools Professional software tools and a wide range of proven application blocks are available for engineering and processing the automation stations. Desigo Xworks Plus The engineering tool Desigo Xworks Plus offers user-friendly software tool that are easy to use and geared to technical processing of customer projects. They include planning, configuration, commissioning and final adjustment of the automation station with the associated program. A variety of report functions are available for documentation purposes. Thanks to its intuitive design of Desigo Xworks Plus, makes it easy to begin working with the time without time-consuming training. Various processes are consistently supported depending on whether you are working with standardized Desigo application libraries or setup the program using data points. Flexible programming Moreover, Desigo Xworks Plus provides tools that flexibly program, together with the Desigo application library, individual solutions as well as parameterization and commissioning. The CFC Editor is used as a basis for this work. Data exchange is continous for distributed work on various user groups within the project. Data only needs to be entered once and is always consistent. Functions for project management are available such as creating and archiving projects as well as check in/out of project data for commissioning. As a comprehensive engineering tool, Desigo Xworks Plus also establishes network topology, integrates third-party systems up to the planning of room automation systems. At the same time Desigo Xworks Plus supports the interaction with standard room automation LNS tools as well. 22 / 30 6BDesigo tools 05 Mar 2012

23 Programming with D-MAP The D-MAP programming language (Desigo Modular Application Programming) for Desigo PX ensures efficient programming and parameter setting for building services plant. D-MAP is optimized for building services applications. The control strategies required for and best suited to efficient operation are implemented using graphics-based data flow programming. Efficient engineering with blocks and compounds The project-specific HVAC applications are configured, programmed, commissioned and maintained using the CFC Editor. The CFC Editor is a graphics editor based on block and data flow techniques. Predefined and tested application programs are assembled to create compound structures (referred to simply as compounds ), and these are then made available in the libraries. Creating the CFC chart with the CFC Editor DMAP programming features The basic elements of D-MAP programming are blocks and "compounds" (compound functional units). These are stored in libraries. To create a D-MAP program, the blocks and compounds for the required functions are put together in the CFC Editor. This process involves creating instances (of blocks) or copies (of compounds) from the libraries The flow of data between blocks is programmed by interconnecting the "pins" (inputs and outputs) of various blocks 23 / 30 6BDesigo tools 05 Mar 2012

24 Proven application solutions The broad range of Desigo application libraries cover individual customers needs with building automation and control applications in a comprehensive manner. All available solutions contain images of actual plant, aggregates and components in a structure which can be used equally for design engineering, control, operation and monitoring and display. You can lower operating costs in a sustainable way using energy optimizing Desigo applications saving energy resources and lowering CO2 emission in the process. Energy efficiency Safety and quality Comfort Operation and monitoring Flexibility Standardized, tested functions meet European standard EN15232 : 2007 Energy Efficiency in buildings Influence of Building Automation and Control and Building Management in the highest classes. Using the existing energy efficiency applications, you not only sustainably save the environment, but also lower building operating costs through the entire life cycle of the building. The application reflect decades of Siemens experience. Many of software applications were developed and extensively tested in real plants to maximize the safety and quality of the solutions. The application portfolio guarantees a high degree of protection for your investment All applications are created with a focus on maximizing the user s comfort. With their sophisticated control strategies and concepts, the applications offer a optimum balance between comfort and energy use. All applications are subject to a transparent operating concept to keep training costs to a minimum. The ease of operation is applied throughout the entire Desigo system and is provided to the customer when compiling the plants. We always pay special attention to ease of operation should operator interventions be required on the Desigo Insight management station or on the panel using the PXM10 / PXM20. Thanks to its consistent operating concept, operators are able to quickly initiate the proper measure; even during hectic situations. Desigo applications map real plants and are clearly structured. Multiple components form an aggregate with multiple aggregates forms a complete plant. Changes to the structures can be undertaken in a flexible manner during a project's engineering phase. Desigo applications thus fit into the overall expandable modular system, ensuring long-term cost-effectiveness. Energy efficiency Safety and quality Comfort Δp Δp Flexibility Operation and monitoring 24 / 30 7BProven application solutions 05 Mar 2012

25 Phased expansion to meet growing needs The Desigo PX automation system can be added to and expanded, so fulfilling the requirement for optimum flexibility. With its modular structure, the system can be adapted to buildings of any type and any size, with scope for phased investment, thereby ensuring long-term investment protection and optimum added value. Desigo WEB and Desigo Terminal Server enable in addition the access to the Managementstation via Web-Technologie. Expansion with the Desigo Insight management station The Desigo Insight management station offers convenient, system-wide multi-user operation, for control and monitoring of all the building services plant from any management station. With its modular structure, Desigo covers all levels of sophistication, from small buildings to large building complexes and geographically separate buildings. The Desigo Insight management station incorporates various user applications depending on requirements: Plant Viewer: graphics-based operation of the plant Trend Viewer: logging and display of measured values Alarm Viewer: display of alarm messages Log Viewer: logging of system events Time Scheduler: time schedulers for a wide range of switching routines Object Viewer: display and modification of data point values Alarm Router: transfer of alarm messages Report Viewer: Reports from present values Reaction Processor: Systemwide monitoring of processes with action by arrival of events Database Audit Viewer: Enhancement for auditing according to Pharma Standard Insight-Open: Integration of third-party systems Data analysis to identify strategies for optimized energy use Example of Plant Viewer 25 / 30 8BPhased expansion to meet growing needs 05 Mar 2012

26 Expansion with the Desigo RX room automation system Desigo RXC is a room automation system for room-by-room control of HVAC plant, lighting and blinds. The range consists of compact and modular room controllers and programmable room units which can be adapted to the functions in the rooms. Standard applications The proven standard applications ensure an ideal range of functions and optimum reliability. The downloadable applications can be adapted quickly and cost-effectively to any changes in room use. Individual standard applications can be commissioned efficiently with a clear and comprehensible software tool. The room controllers communicate with the Desigo room units and other LONMARK compatible devices via the standard LonTalk/LONWORKS or KNX S-Mode (EIB) bus system. Modular solution for HVAC, lighting and blinds Low-cost solution for radiators, chilled ceilings and VAV control Cost-efficient compact fancoil solutions Integration into the Desigo PX automation level The room automation system operates in stand-alone mode at the field level, but can also be integrated into the Desigo PX automation level via a system controller. In addition to this integration option (mapping between LonTalk or KNX S-Mode (EIB) and BACnet data points), the system controller also allows the following functions: Collection of room-group data for further processing at the automation level (energy demand etc.) Collection of data for monitoring and operation at the management level Alarm generation in the event of faults, or where process values are overwritten Scheduler program/calendar Trend monitoring of rooms Uniform operation at the automation level, using the PXM20 and/or Web client The integration of Desigo RXC into the automation level is done as follows: PXC00/50/100/200...D with PXX-L11 for 60 RXC room controllers PXC00/50/100/200...D with PXX-L12 for 120 RXC room controllers For the integration of Desigo RXB into the automation level, the following system controller is available: PXC00-U with extension module PXA30-K11 26 / 30 8BPhased expansion to meet growing needs 05 Mar 2012

27 Integration of third-party products Additional subsystems from third-party manufacturers, such as fire detection systems, intruder protection, lighting or refrigeration plant, can be integrated simply and cost-effectively into Desigo PX. The various integration options are as follows: via TX Open via PX Open system controller via standard BACnet communications (peer-to-peer) PX Open makes it possible to integrate third-party products which do not support BACnet, by converting all the data into standard BACnet objects. The result is a uniform, open system at the automation level, able to communicate with other automation stations and operator units. Field level and room controller Automation level Management level System controller LONWORKS LONWORKS LONWORKS RXC Third-party Room system controller Third-party system BACnet Sinteso Cerberus PRO PX KNX Synco 700 Standard controller Primary plants RXZ97.1/KNX Third-party system PXC50/100/200..D Modular TX-I/O modules QAX9.. EnOcean Room units Management station Desigo Insight Third-party system TX Open BACnet/LonTalk or BACnet/IP PXC...D compact Peer to peer communication via BACnet ev. adapter PX Open RS232 RS485 Modbus M-Bus Third-party system several protocolls 10756Z06en ev. router SX Open OPC Drittsystem Integration of third-party products In conjunction with the system controller, the PX-Open platform adds the following BACnet functions to the subsystems of third-party manufacturers: Mapping of data points to BACnet Alarms Scheduler/Calendar Trend Peer-to-peer communications with other PX automation stations Uniform operation at the automation level, using the PXM20 and/or Web client 27 / 30 8BPhased expansion to meet growing needs 05 Mar 2012

28 Flexible topology Various transport media can be used for communication between the system components of the Desigo PX system. In new buildings and in modernization projects, this ensures maximum flexibility with minimum investment. The key feature is the use, at both the management level and the automation level, of BACnet, the international standard protocol specifically optimized for building automation and control. The following media can be used for communication between the system components, so making optimum use of existing installations in and between buildings: LonTalk / LONWORKS Ethernet/IP RS232 PTP Further, in the event of expansion or extension, Ethernet/IP is easily introduced as a "backbone" for the system. Example of a building topology 28 / 30 8BPhased expansion to meet growing needs 05 Mar 2012

29 29 / 30 8BPhased expansion to meet growing needs 05 Mar 2012

30 Siemens Schweiz AG Building Technologies International Headquarters Gubelstrasse 22 CH-6301 Zug Tel Fax Siemens Schweiz AG Building Technologies Sennweidstrasse 47 CH-6312 Steinhausen Tel Fax The information in this document contains a general description of the available technical options, which may not apply in all cases. The required features should therefore be specified on a case-by-case basis at the time the contract is concluded. 30 / 30 8BPhased expansion to meet growing needs 05 Mar 2012

Desigo PX Automation system for HVAC and building services

Desigo PX Automation system for HVAC and building services Desigo PX Automation system for HVAC and building services System overview Version 5.1_SP and later Building Technologies Desigo PX Automation system for HVAC and building services Version 5.1_SP and later

More information

Desigo building automation flexible and energy-efficient

Desigo building automation flexible and energy-efficient Desigo building automation flexible and energy-efficient The intelligent system for all building types, sizes and all applications Answers for infrastructure. Desigo high energy efficiency and flexibility

More information

Automation stations modular model

Automation stations modular model s 9 221 PXC64-U DESIGO PX Automation stations modular model PXC-U Freely programmable modular automation stations for HVAC and building services Native BACnet automation station with communication via

More information

DESIGO with VISONIK building automation system

DESIGO with VISONIK building automation system DESIGO with VISONIK building automation system Answers for infrastructure. DESIGO high energy efficiency and flexibility to protect your investments Making efficient savings without sacrifices with the

More information

Building Technologies

Building Technologies Building Technologies RXB room automation system System overview Contents Comfort and well-being in every room...5 Range overview...6 Coordinated room controllers...7 The room units: the key to individual

More information

Automation stations modular series

Automation stations modular series s 9 222 9222P01 DESIGO PX Automation stations modular series PXC...D PXC...-E.D PXA40- Freely programmable modular automation stations for HVAC and building services plants. Native BACnet automation station

More information

Desigo building automation system

Desigo building automation system Desigo building automation system Answers for infrastructure. Desigo high energy efficiency and flexibility to protect your investments Realize savings efficiently without sacrifices with the building

More information

18 System limits. Key words

18 System limits. Key words 18 System limits Key words System limits, topology limits, number of devices, number of users, number of data points, number of BACnet objects / BACnet services, DESIGO XWORKS plus (XWP) Summary This section

More information

Guest Room Controls & Monitoring System. Integrated Solution for Hotels Southern Countries. www.lonix.com

Guest Room Controls & Monitoring System. Integrated Solution for Hotels Southern Countries. www.lonix.com Guest Room Controls & Monitoring System Integrated Solution for Hotels Southern Countries www.lonix.com GUEST ROOM CONTROLS & MONITORING SYSTEM INDEX 1 GENERAL... 3 1.1 SYSTEM INTEGRATION... 3 1.2 USER

More information

MM8000 safety and security with smart danger management. A scalable and flexible management station for any requirement. Answers for infrastructure.

MM8000 safety and security with smart danger management. A scalable and flexible management station for any requirement. Answers for infrastructure. MM8000 safety and security with smart danger management A scalable and flexible management station for any requirement Answers for infrastructure. Sophisticated technology for comprehensive safety Safety

More information

Desigo V5 Flexible and energy-efficient

Desigo V5 Flexible and energy-efficient Desigo V5 Flexible and energy-efficient introduction presentation Desigo V5 Siemens Ltd 2012. All rights reserved. Desigo V5 Introduction/Contents Contents Desigo V5 overview/highlights 3 Desigo V5 Total

More information

Siemens AG All rights reserved.

Siemens AG All rights reserved. DESIGO V5 Siemens AG 2008. All rights reserved. DESIGO DESIGO Insight DESIGO XWORKS plus DESIGO RXT10 LNS-tools 2 DESIGO DESIGO Tools Landscape DESIGO Config. Module DESIGO XWORKS plus Eng-Data on Site

More information

Building Technologies. DESIGO Building automation and control system. System description for use with DESIGO XWORKS

Building Technologies. DESIGO Building automation and control system. System description for use with DESIGO XWORKS Building Technologies DESIGO Building automation and control system System description for use with DESIGO XWORKS Contents The DESIGO building automation and control system: the powerful, open system...5

More information

DESIGO V5. Siemens AG All rights reserved. BT HQ

DESIGO V5. Siemens AG All rights reserved. BT HQ DESIGO V5, Page 1 Siemens AG 2010. 2008. All rights reserved. DESIGO V5, Island Bus, BACnet/Lonalk BACnet/IP BACnet/PP Page 2 DESIGO V5 DESIGO INSIGH DESIGO PX DESIGO RX Integration INSIGH / OPEN BACnet

More information

It s all open from here.

It s all open from here. It s all open from here. Never let technology impose limits on your future. That thinking drove the design of Honeywell EXCEL 5000 OPEN systems the most flexible and open communication platform for building

More information

PXM20-E. Operator unit DESIGO PX

PXM20-E. Operator unit DESIGO PX 9 234 DESIGO PX Operator unit PXM20-E Network-compatible operator unit for viewing and operating one or more DESIGO PX automation stations. High-grade display with adjustable contrast Simple key operation

More information

SAUTER EY-modulo 5. The complete building management solution

SAUTER EY-modulo 5. The complete building management solution SAUTER EY-modulo 5 The complete building management solution SAUTER high-end technology for the highest standards in fully integrated building management. The best of the best. In a single system. Integrated,

More information

Electronic Control Devices The European Product Catalogue 2007

Electronic Control Devices The European Product Catalogue 2007 FX14 Field Controller (1/4) FX14 Field Controller The FX14 is an equipment field controller in the Facility Explorer range of products. The controller is designed specifically for commercial Heating, Ventilating,

More information

Electronic Control Devices The European Product Catalogue 2007

Electronic Control Devices The European Product Catalogue 2007 FX07 Field Controller (1/4) FX07 Field Controller Display Model Dimensions in mm (inches) The FX07 is a terminal unit controller in the Facility Explorer range of products. The controller is designed specifically

More information

Integrated Building Management and Security System. Building Automation & Security. www.coba-group.com

Integrated Building Management and Security System. Building Automation & Security. www.coba-group.com Integrated Building Management and Security System Building Automation & Security www.coba-group.com INTEGRATED BUILDING MANAGEMENT AND SECURITY SYSTEM INDEX 1 GENERAL... 3 1.1 SYSTEM INTEGRATION... 3

More information

DESIGO PX PXM10 operator unit User's guide Version 2.3. Siemens Building Technologies Building Automation

DESIGO PX PXM10 operator unit User's guide Version 2.3. Siemens Building Technologies Building Automation s DESIGO PX PXM10 operator unit User's guide Version 2.3 CM110397en 31.08.2004 Siemens Building Technologies Building Automation 2/34 Building Automation 31.08.2004 Contents 1 About this manual... 5 1.1

More information

TXM1.8T. Triac module TX-I/O. Used for Thermic and motor-driven actuators (AC 24 V)

TXM1.8T. Triac module TX-I/O. Used for Thermic and motor-driven actuators (AC 24 V) s 8 179 8179p01 TX-I/O Triac module sed for Thermic and motor-driven actuators (AC 24 V) AC 24 V-controlled devices TXM1.8T 8 triac outputs (AC 24 V), configured individually for: Permanent contact Three-point

More information

Answers for infrastructure. HVAC control with Synco simple and energy-efficient

Answers for infrastructure. HVAC control with Synco simple and energy-efficient Answers for infrastructure. HVAC control with Synco simple and energy-efficient Synco for enhanced comfort and energy efficiency Buildings place different requirements on HVAC control systems depending

More information

FX07 Field Controller

FX07 Field Controller Product Bulletin FX07 Field Controller Issue Date March 25, 2008 FX07 Field Controller The FX07 is a high performance field controller designed specifically for commercial Heating, Ventilating, Air Conditioning,

More information

Begin using tomorrow s security features today.

Begin using tomorrow s security features today. Begin using tomorrow s security features today. Advantage Services : Life Cycle for Security Systems Building Technologies Software Update/Upgrade Technology Strategy Documentation System Modernization

More information

IBMS Specification. Specification & Design Guideline for Integrated Intelligent Building Management System. Lonix Ltd. www.lonix.

IBMS Specification. Specification & Design Guideline for Integrated Intelligent Building Management System. Lonix Ltd. www.lonix. 1 (23) IBMS Specification Specification & Design Guideline for Integrated Intelligent Building Management System Lonix Ltd www.lonix.com 2 (23) Specification for Integrated Intelligent Building Management

More information

How can I protect valuable assets from fire and ensure business continuity?

How can I protect valuable assets from fire and ensure business continuity? How can I protect valuable assets from fire and ensure business continuity? XC10 compact panels combine fire detection and extinguishing control for comprehensive safety. Answers for infrastructure. Compact

More information

Process Alarm Solutions

Process Alarm Solutions Process Alarm Solutions Reliable Supervision and Control www.selco.com SELCO flexible alarm panels for supervision and control SELCO provides efficient and reliable solutions for alarm monitoring of electrical

More information

Integrated Building Management and Security System. Building Automation & Security. www.lonix.com

Integrated Building Management and Security System. Building Automation & Security. www.lonix.com Integrated Building Management and Security System Building Automation & Security www.lonix.com INTEGRATED BUILDING MANAGEMENT AND SECURITY SYSTEM INDEX 1 GENERAL... 3 1.1 GREEN BUILDING REQUIREMENTS...

More information

PXG3.W100. Web interface BACnet/IP. Desigo PX

PXG3.W100. Web interface BACnet/IP. Desigo PX s 9 294 Desigo PX Web interface BACnet/IP PXG3.W100 Local or remote operation of one or multiple PX automation station(s) via Desigo Touch Panels (TP) and standard web browser Connection via Ethernet Central

More information

IntesisBox. BACnet/IP Server - LON. Integrate LonWorks devices or systems into BACnet control systems. IntesisBox RS232. Only needed for configuration

IntesisBox. BACnet/IP Server - LON. Integrate LonWorks devices or systems into BACnet control systems. IntesisBox RS232. Only needed for configuration IntesisBox Server - LON Gateway for integration of LON devices into BACnet control systems Integrate LonWorks devices or systems into BACnet control systems. BACnet IP client Ethernet LonWorks TP/FT-10

More information

MM8000 highest safety and security with intelligent danger management

MM8000 highest safety and security with intelligent danger management MM8000 highest safety and security with intelligent danger management A scalable and flexible management station for any requirement Answers for infrastructure. Sophisticated technology for comprehensive

More information

Engineering and service software For KNX and LPB plants

Engineering and service software For KNX and LPB plants 5 649 Engineering and service software For KNX and LPB plants As of V9.00 ACS790 The engineering and service software ACS790 is for KNX and LPB plants equipped with the appropriate bus devices. The software

More information

Application Sheet Fan coil unit with staged fan, heating/cooling coil (2 pipe) on analog output

Application Sheet Fan coil unit with staged fan, heating/cooling coil (2 pipe) on analog output Heating with LHW and cooling with CHW changeover Modulating control of heating and cooling valve (2 pipe) on analog Automatic or manual 3-speed fan control Room temperature and fan speed operation via

More information

Integrated Controls & Monitoring System for Apartments. Solution for southern countries. www.lonix.com

Integrated Controls & Monitoring System for Apartments. Solution for southern countries. www.lonix.com Integrated Controls & Monitoring System for Apartments Solution for southern countries www.lonix.com INTEGRATED CONTROLS & MONITORING SYSTEM FOR APARTMENTS INDEX 1 GENERAL... 3 1.1 SYSTEM INTEGRATION...

More information

TX OPEN RS232/485 module

TX OPEN RS232/485 module s 8 185 8185P01 TX-I/O ; DESIGO OPEN TX OPEN RS/485 module for integrating third-party systems and devices to DESIGO (V4 or higher) TXI1.OPEN Platform to integrate third-party systems and devices to the

More information

StruxureWareTM for Buildings

StruxureWareTM for Buildings StruxureWareTM for Buildings Next generation intelligent Building Management System (ibms) Product Catalogue Make the most of your energy Plan for the future while protecting your past investments. 03

More information

Building automation and control systems. System Catalog 2014. Answers for infrastructure and cities.

Building automation and control systems. System Catalog 2014. Answers for infrastructure and cities. Building automation and control systems System Catalog Answers for infrastructure and cities. Content 1 System functions Desigo energy-efficient and flexible building automationsystem Desigo system topology

More information

AUTOMATIONWORX. Seamless system technology from the remote control station to the control center

AUTOMATIONWORX. Seamless system technology from the remote control station to the control center AUTOMATIONWORX Seamless system technology from the remote control station to the control center Remote control and control engineering from a single source OHP and PHOENIX CONTACT You are in search of

More information

BACnet router for BACnet/IP BACnet/LonTalk BACnet MS/TP

BACnet router for BACnet/IP BACnet/LonTalk BACnet MS/TP s 9 270 Desigo PX BACnet router for BACnet/IP BACnet/LonTalk BACnet MS/TP PXG3.L PXG3.M Routing between BACnet/IP, BACnet/LonTalk (PXG3.L only), and BACnet MS/TP Supports BACnet/IPv4 and BACnet/IPv6 ANSI/ASHRAE

More information

NEW GENERATION PROGRAMMABLE AUTOMATION CONTROLLER

NEW GENERATION PROGRAMMABLE AUTOMATION CONTROLLER NEW GENERATION PROGRAMMABLE AUTOMATION CONTROLLER NEW GENERATION PROGRAMMABLE AUTOMATION CONTROLLER Understanding what a PAC is starts from the understanding of PLC. A PLC is a Programmable Logic while

More information

Communication in building automation

Communication in building automation Communication in building automation Answers for infrastructure and cities. BACnet www.big-eu.org Introduction The communication protocol BACnet was specially developed for the requirements of buildings.

More information

RRV934. Multi-controller. Synco living

RRV934. Multi-controller. Synco living s 2 709 Synco living Multi-controller RRV934 RF-based multi-controller For precontrol of up to 2 room groups For control of ventilation plant with up to 3 stages RF communication based on KNX standard

More information

RXZ97.1/KNX. Gateway EnOcean/KNX DESIGO RXB. Can be used with: DESIGO RXB Devices / Systems with KNX Communication

RXZ97.1/KNX. Gateway EnOcean/KNX DESIGO RXB. Can be used with: DESIGO RXB Devices / Systems with KNX Communication s 1 662 1662P01 DESIGO RXB Gateway EnOcean/KNX Can be used with: DESIGO RXB Devices / Systems with KNX Communication RXZ97.1/KNX Wireless receiver with KNX interface Evaluation of up to 32 EnOcean room

More information

RDG/RDF room thermostats

RDG/RDF room thermostats RDG/RDF room thermostats Application Guide Answers for infrastructure. Application overview 2-pipe el. heater or radiator 4-pipe with el. heater Chilled/ heated ceiling Chilled/heated ceiling with el.

More information

Heating, Ventilation and Air Conditioning

Heating, Ventilation and Air Conditioning Heating, Ventilation and Air Conditioning Y = 100.0 % 100 % 22.0 C Overriding Sensor Values 1800 mbar 2000 mbar Y = 100.0 79.4 % 12.0 C 31.0 C 15.0 C 27.1 C 47 % 0 % Fault Collective malfunction: Pre-flush:

More information

HELPING BUILDINGS THINK

HELPING BUILDINGS THINK DATASHEET PORTFOLIO Product Helping buildings think. We offer a wide range of products and services for our clients. This documentation provides a list of products that we can offer. Deliverables Products

More information

Full control of your HVAC system with a tailor-made MCX solution

Full control of your HVAC system with a tailor-made MCX solution Full control of your HVAC system with a tailor-made MCX solution MCX Programmable Controllers 3 programmabillity levels to help you perform both standard and custom control software algorithms. www.danfoss.com/mcx

More information

SAUTER novapro Open: B-AWS. BACnet Advanced Workstation

SAUTER novapro Open: B-AWS. BACnet Advanced Workstation SAUTER novapro Open: B-AWS BACnet Advanced Workstation SAUTER novapro Open: A SCADA system that provides all needs for any type of building. Open for public buildings Secure for FDA and GAMP Flexible for

More information

Keeps an eye on the motor. And your system running.

Keeps an eye on the motor. And your system running. SIMOCODE ES in the TIA Portal siemens.com/simocode Keeps an eye on the motor. And your system running. SIMOCODE pro: The motor management system for increased transparency and improved process quality

More information

Symaro sensors for flush mounting, innovative and energy-efficient

Symaro sensors for flush mounting, innovative and energy-efficient The worldwide standard for home and building control Symaro sensors for flush mounting, innovative and energy-efficient Energy-saving sensors of flexible design with standardized communication Answers

More information

FX07 Field Controller

FX07 Field Controller Product Bulletin FX07 Field Controller Issue Date May 5, 2011 FX07 Field Controller The FX07 is a high performance field controller designed specifically for commercial Heating, Ventilating, Air Conditioning,

More information

C o v e r. Thin Client Application Options. SIMATIC Thin Client s FAQ h April 2009 e et. Service & Support. Answers for industry.

C o v e r. Thin Client Application Options. SIMATIC Thin Client s FAQ h April 2009 e et. Service & Support. Answers for industry. C o v e r SIMATIC Thin Client s FAQ h April 2009 e et Service & Support Answers for industry. Question This entry originates from the Service & Support Portal of Siemens AG, Sector Industry, Industry Automation

More information

Digital input modules

Digital input modules 8 172 TX-I/O Digital input modules TXM1.8D TXM1.16D Two fully compatible versions: TXM1.8D: 8 inputs, each with a three-color LED (green, yellow or red) TXM1.16D: As TXM1.8X, but 16 inputs, each with a

More information

Building Technologies

Building Technologies Building Technologies : simple and secure danger management. Integration increases security! The increasing danger potential for people and assets makes the need for better protection increasingly more

More information

OPENweb. Efficient controlling at the highest level.

OPENweb. Efficient controlling at the highest level. OPENweb Efficient controlling at the highest level. OPENweb. Secure, networked, powerful. OPENweb at a glance. You would like to have your building service facilities reliably monitored and efficiently

More information

Control Systems. Efficient room control

Control Systems. Efficient room control Control Systems Efficient room control AIRCONTROL Occupancy Humidity C VOC 2 Demand-based room control strategies Efficient room control with X-AIRCONTROL Increasingly demanding requirements on energy

More information

PRODUCT LIST Facility DDC Access WebXL DDC

PRODUCT LIST Facility DDC Access WebXL DDC PRODUCT LIST Facility DDC Access WebXL DDC Effective from 01/10/2014 Sphere Systems Pty Ltd Unit 6 / 9 Mirra Crt Bundoora Victoria Australia 3083 ABN 98 006 579 004 Phone +61 3 9470 8844 Fax +61 3 9470

More information

Room thermostats wide variety and high energy efficiency

Room thermostats wide variety and high energy efficiency Room thermostats wide variety and high energy efficiency New room thermostats of modern design for fan coil units and universal applications Answers for infrastructure. Room thermostats energy-efficient

More information

Short Form Catalogue. Alarm Systems. Reliable Supervision and Control

Short Form Catalogue. Alarm Systems. Reliable Supervision and Control Short Form Catalogue Alarm Systems Reliable Supervision and Control Alarm Monitors and Indicators The SELCO product range includes a number of alarm monitors and indicator panels for use in numerous applications.

More information

Application Note #563 Revision A November 2015 Lutron / Automated Logic BACnet Integration

Application Note #563 Revision A November 2015 Lutron / Automated Logic BACnet Integration Revision A November 2015 Lutron / Automated Logic BACnet Integration Quantum Overview GreenGlanceR Client PersonnaR PC web-based personal control ipad with Q-Control+ app Corporate Building Network QuantumR

More information

APPLICATION NOTE. The DMP Software Family DMP COMPUTER SOFTWARE PROGRAMS

APPLICATION NOTE. The DMP Software Family DMP COMPUTER SOFTWARE PROGRAMS APPLICATION NOTE Contents The DMP Software Family... 1 Stand-Alone Link Software... 1 Add-on Modules for Link Software... 1 System Link End-User Panel Management Software... 2 Simple Registration and Activation...

More information

Compact Monitoring Technology your environmental monitoring solution

Compact Monitoring Technology your environmental monitoring solution Compact Monitoring Technology your environmental monitoring solution Monitor your GxP environmental parameters and cut your validation costs. Solutions for Life Science and Hospitals www.siemens.com/cmt

More information

NEW. EVEN MORE data acquisition and test stand automation

NEW. EVEN MORE data acquisition and test stand automation NEW EVEN MORE data acquisition and test stand automation the new class of data The plug&play complete package User benefits Expert Series is the latest generation of data acquisition Complete hardware

More information

Building Technologies. Access Control. SiPass integrated Fully expandable system that grows with your business

Building Technologies. Access Control. SiPass integrated Fully expandable system that grows with your business s Building Technologies Access Control SiPass integrated Fully expandable system that grows with your business SiPass integrated : a system, that leaves nothing to be desired. SiPass integrated is the

More information

S Page 608 Mar 2008 Siemens ITS

S Page 608 Mar 2008 Siemens ITS S7-200 Overview The new modular miniature controller from the SIMATIC S7 family Comprising: Controller with integrated PROFINET IO controller interface for communication between SIMATIC controllers, HMI,

More information

IP-Based Communications Solutions

IP-Based Communications Solutions IP-Based Communications Solutions IP-Based Communications Solutions Effective Communications Facility-Wide and Campus-Wide Leverage your network and lower your system costs Scalable, cost-effective and

More information

The product segments Heating, ventilation, air conditioning. Control Products & Systems OEM. Answers for infrastructure.

The product segments Heating, ventilation, air conditioning. Control Products & Systems OEM. Answers for infrastructure. The product segments Heating, ventilation, air conditioning Control Products & Systems OEM Answers for infrastructure. The right product for every application Siemens specializes in the development, production

More information

TAC Vista Family TAC Xenta 700 Everything You Need to Monitor and Control Your Building

TAC Vista Family TAC Xenta 700 Everything You Need to Monitor and Control Your Building TAC Vista Family TAC Xenta 700 Everything You Need to Monitor and Control Your Building Retail: an application example for small-size solutions The TAC Xenta 700 is a complete Building Management System.

More information

ControlMaestro and. BACnet integrated solution

ControlMaestro and. BACnet integrated solution ControlMaestro and BACnet integrated solution The Automation Software Platform designed to deliver first class solutions to the Build Automation market using its intimate knowledge of Building protocols.

More information

Can I customize a building automation system to meet my building needs and my budget?

Can I customize a building automation system to meet my building needs and my budget? Can I customize a building automation system to meet my building needs and my budget? The Web-based TALON system gives you the cost-effective control you need. Answers for industry. 2 Scalability made

More information

Optimize your simple machines... Modicon M218 Selection Guide

Optimize your simple machines... Modicon M218 Selection Guide Optimize your simple machines... Modicon M218 Selection Guide Compact Solution for Simple Machines Optimized Logic Controller Modicon M218 With intelligent software platform, specialized functional s,

More information

Dream Report vs MS SQL Reporting. 10 Key Advantages for Dream Report

Dream Report vs MS SQL Reporting. 10 Key Advantages for Dream Report Dream Report vs MS SQL Reporting 10 Key Advantages for Dream Report Page 2 of 15 Table of Contents INTRODUCTION 3 PROFESSIONAL SOFTWARE FOR NON-PROGRAMMING USERS 4 CONSIDERABLE DIFFERENCE IN ENGINEERING

More information

Inwall Room Temperature Unit

Inwall Room Temperature Unit Inwall Room Temperature Unit TM11B01KNX TM11B11KNX TM11B21KNX Product Handbook Product: Inwall Room Temperature Unit Order Code: TM11B01KNX TM11B11KNX TM11B21KNX Application Program ETS: TM11B_1KNX Inwall

More information

Temperature Controller (Heat Pumps)

Temperature Controller (Heat Pumps) 3 346 Temperature Controller (Heat Pumps) RWD34 RWD44 For comfort control in HVAC & R systems Standalone electronic controller Programmable controller with preconfigured applications Two universal inputs

More information

DCS Data and communication server

DCS Data and communication server 8 58 PLD.TOWER PLD.RACK VISONIK DCS Data and communication server PLD.TOWER PLD.RACK Data and communication servers (DCS) are used as management stations in building automation and control (BAC). With

More information

RVL470. Heating Controller. Building Technologies HVAC Products. Series B

RVL470. Heating Controller. Building Technologies HVAC Products. Series B 2 522 Heating Controller Series B RVL470 Multifunctional heating controller for use in residential and non-residential buildings; suitable for weather-dependent flow temperature control of heating zones

More information

SECTION 16911 WEB-BASED POWER MONITORING COMMUNICATIONS SYSTEM

SECTION 16911 WEB-BASED POWER MONITORING COMMUNICATIONS SYSTEM WEB-BASED POWER MONITORING COMMUNICATIONS SYSTEM PART 1 GENERAL 01 02 03 04 SCOPE This section describes the metering, communications, and visualization requirements for a modular, scalable Web-based Power

More information

Electronics Ltd. Presenting. Power, Intelligence... with a sense of feeling

Electronics Ltd. Presenting. Power, Intelligence... with a sense of feeling Electronics Ltd Presenting Power, Intelligence... with a sense of feeling By Appointment to Her Majesty The Queen Supplier of Fire Detection Equipment Kentec Electronics Ltd. Dartford Plug in slots K772

More information

Newron Efficient building management

Newron Efficient building management Newron Efficient building management Everything from one source. And one head. Because today efficient buildings are intelligently networked. The suitable solutions for this can now be found by architects,

More information

EUROTHERM MASTER COMMUNICATIONS 5000 Series with Master Communications for unsurpassed access to process data everywhere

EUROTHERM MASTER COMMUNICATIONS 5000 Series with Master Communications for unsurpassed access to process data everywhere EUROTHERM MASTER COMMUNICATIONS 5000 Series with Master Communications for unsurpassed access to process data everywhere CONNECTIONS MADE EASY The 5180V, 5100V and 5000B now all support Modbus Master Communications

More information

Solutions for E-Mobility

Solutions for E-Mobility Solutions for E-Mobility Qatar PHOENIX CONTACT in dialog with customers and partners worldwide Phoenix Contact is a worldwide market leader in the field of electrical engineering, electronics, and automation.

More information

HOTEL ROOM MANAGEMENT SYSTEM - specifications OVERVIEW

HOTEL ROOM MANAGEMENT SYSTEM - specifications OVERVIEW OVERVIEW The purpose of this this specification document is to define the main features and guide lines for the Hotel Room Management System, which includes Access Control, Guest Management, & Building

More information

Hotel Solution. Hotel room management system. Building Technologies

Hotel Solution. Hotel room management system. Building Technologies Hotel Solution Hotel room management system Building Technologies s Hotel Solution Hotel room management system System description CM2S6301en 30.11.2008 Subject to change 2 Table of contents 1 Hotel Solution

More information

Intelligent Vibration Monitoring

Intelligent Vibration Monitoring Diagnostic Systems Condition Based Monitoring Diagnostic Systems Condition Based Monitoring Intelligent Vibration Monitoring efector Octavis for real-time vibration monitoring Solutions for Predictive

More information

INTELLIGENT BUILDINGS BUS SYSTEMS, MyHOME. Ján Cigánek, Martin Janáček, Stanislav Števo

INTELLIGENT BUILDINGS BUS SYSTEMS, MyHOME. Ján Cigánek, Martin Janáček, Stanislav Števo INTELLIGENT BUILDINGS BUS SYSTEMS, MyHOME Ján Cigánek, Martin Janáček, Stanislav Števo Slovak University of Technology Ilkovičova 3, 812 19 Bratislava, Slovak Republic Tel.: +421 2 60291111 Fax: +421 2

More information

Is there an affordable building automation system I can customize to meet my needs?

Is there an affordable building automation system I can customize to meet my needs? Is there an affordable building automation system I can customize to meet my needs? APOGEE with BACnet builds upon past investments, responds to present challenges, and anticipates future needs. Answers

More information

A. Provide an extension to an existing DDC control system. The extension shall be Apogee product installed by Siemens Industry, Inc.

A. Provide an extension to an existing DDC control system. The extension shall be Apogee product installed by Siemens Industry, Inc. VAV Office Tenant Fitout Specification SECTION 23 09 00 AUTOMATIC TEMPERATURE CONTROLS PART 1 - GENERAL 1.1 AUTOMATIC TEMPERATURE CONTROLS A. Provide an extension to an existing DDC control system. The

More information

Niagara IT Manager s Guide

Niagara IT Manager s Guide 3951 Westerre Parkway, Suite 350 Richmond, VA 23233 804.747.4771 Phone 804.747.5204 FAX Niagara IT Manager s Guide A White Paper An IT Manager s Guide to Niagara This document addresses some of the common

More information

Easy and efficient asset management for your business

Easy and efficient asset management for your business Easy and efficient asset management for your business PERFORMANCE MADE SMARTER Featuring Monitoring of process values Diagnostics Device programming Simulation of process values TEMPERATURE I.S. INTERFACES

More information

Reliable Security Solutions

Reliable Security Solutions Reliable Security Solutions Challenger10 The proven solution for access control, intrusion detection and video integration. An integrated security solution for your most challenging environments The Tecom

More information

ComfortPoint Open Building Management System. For consultants and specifiers. The Simply Smart way to optimize building control and performance

ComfortPoint Open Building Management System. For consultants and specifiers. The Simply Smart way to optimize building control and performance ComfortPoint Open Building Management System For consultants and specifiers The Simply Smart way to optimize building control and performance ComfortPoint Open BMS. Simply Smart. The Honeywell ComfortPoint

More information

Compact Telecontrol System TM 1703 mic Simple, clever automation

Compact Telecontrol System TM 1703 mic Simple, clever automation Compact Telecontrol System Simple, clever automation Power Transmission and Distribution With the growing pressure on costs in virtually all processes, there is increasing need to also automate smaller

More information

NXL Series Inverters. HVAC Inverters made simple

NXL Series Inverters. HVAC Inverters made simple NXL Series Inverters HVAC Inverters made simple Honeywell s Voice Of the Customer process unveils a range of requirements expressed by specifiers and installers, that are ideally covered by the NXL inverter

More information

Web Datalogger. Unit RS232C. General-purpose modem RS485. IP address search screen

Web Datalogger. Unit RS232C. General-purpose modem RS485. IP address search screen Equipment, facilities, and service networks for data collection/logging, data transfer via e-mail/website, and system streamlining can be established without special knowledge. Energy saving system in

More information

Emergency Shutdown: The unit shall shut down and generate an alarm upon receiving an emergency shutdown signal.

Emergency Shutdown: The unit shall shut down and generate an alarm upon receiving an emergency shutdown signal. SECTION 230993 PART 1: GENERAL 1.1 VARIABLE AIR VOLUME - AHU (typical of 1) Run Conditions - Continuous: The unit shall run continuously. Emergency Shutdown: The unit shall shut down and generate an alarm

More information

KNX Panasonic Air Conditioners

KNX Panasonic Air Conditioners IntesisBox KNX Panasonic Air Conditioners Gateway for Panasonic ECOi and PACi system integration into KNX networks Up to 30 Outdoor units Up to 64 Indoor units PA-AC-KNX-64/128 EIA485 U1U2 line U1U2 line

More information

Saving energy while maintaining a constant room climate

Saving energy while maintaining a constant room climate Our world is undergoing changes that force us to think in new ways: demographic change, urbanization, global warming and resource shortages. Maximum efficiency has top priority and not only where energy

More information

Tracer Summit Web Server

Tracer Summit Web Server Tracer Summit Web Server Web-based access for the Tracer Summit building automation system March 2003 BAS-PRC014-EN Introduction The Tracer Summit Web Server provides the ability to operate a Tracer Summit

More information

SOLARCARE SERIES PRODUCT AND APPLICATION GUIDE

SOLARCARE SERIES PRODUCT AND APPLICATION GUIDE SOLARCARE SERIES PRODUCT AND APPLICATION GUIDE for solar energy management LEATEC Delivering Solutions for Energy Management SOLAR ENERGY DATA CENTER BUILDING 4 to8 String Monitoring with 0.% Accuracy

More information