Credential Templates - Islamic Republic of Pakistan

Transcription

1 Credential Templates - Islamic Republic of Pakistan International Qualifications Assessment Service (IQAS), Government of Alberta TABLE OF CONTENTS Secondary School Certificate...2 Higher Secondary Certificate...12 Diploma of Associate Engineer...18 Bachelor (Pass) Degree...22 Bachelor (Honours) Degree (3 Years)...28 Bachelor (Honours) Degree (4-5 Years)...33 Bachelor of Technology...41 Bachelor of Education...48 Bachelor of Law(s) (LLB)...53 First Degrees Medicine, Dentistry and Veterinary Medicine...61 Postgraduate Certificates and Diplomas...67 Master Degree (3+1 or 2+2 Years)...72 Master of Education...77 Master of Philosophy and Equivalent Degrees...84 Doctor of Philosophy...90 Page 1 of 92

2 Date Entered: Dec 2008 Category: Secondary Credential Actual Name: Secondary School Certificate (SSC) Credential Alternate Actual Name(s): Matriculation Examination (Certificate) Country: PAKISTAN (Islamic Republic of Pakistan) Secondary School Certificate Time Period Credential Offered: Current Issuing Body: 25 Boards of Intermediate and Secondary Education (BISEs) and 3 Boards of Technical Education, which are all members of the Inter Board Committee of Chairmen (IBCC) Admission Requirements: Graduation from middle school /Middle Standard Examination (representing 8 years of schooling) Program Description: Ten-year combined primary and lower secondary education program (Lower) secondary schools in Pakistan provide two years of general education. Upon completion of secondary education, students receive a certificate by passing an external examination given by one of the Boards of Intermediate and Secondary Education or Boards of Technical Education. Provides Access to in the Home Country: Employment Admission into higher secondary school and further vocational and technical training Placement Recommendations: The placement recommendations in the following published references were considered in the formulation of IQAS recommendations. IERF (International Educational Research Foundation): New Country Index, Ten Speed Press, 2004 (US) Page 2 of 92

3 NOOSR (National Office of Overseas Skills Recognition). Country Education Profiles Online: PIER (Projects for International Education Research): The Admission and Academic Placement of Students from South Asia: Bangladesh, India, Pakistan, and Sri Lanka, 1986 (US) UK NARIC National Recognition Information Centre for the United Kingdom, International Comparisons. IQAS Recommendations for: Generally compares to the completion of Grade 10. Course Equivalencies: Grade 10 level courses IQAS Rationale: (Lower) secondary education in Pakistan lasts two years (Grades 9-10) following the completion of middle school and caters for children aged 13 to 14. The language of instruction is Urdu. Students must study a few compulsory subjects plus additional subjects based on a chosen course group. Upon the completion of their studies, they sit examinations administered by the various Boards of Intermediate and Secondary Education or Boards of Technical Education in order to receive the Secondary School Certificate (SSC) or Matriculation Certificate. The organization of the course groups changes with each revision of the national curriculum. The schemes of studies for different course groups prescribed by the 1995 and 2000 curricula are described below. These schemes only serve as general guidelines as the actual format and allocation of marks may vary, depending on the time period and examining board. Scheme of Studies, 1995 Curriculum In the 1995 curriculum, there are four compulsory subjects for all students worth total maximum marks of 450: Compulsory Subject Mark Urdu/regional language 150 English 150 Islamiat/Islamiyat 75 Pakistan Studies 75 Subtotal 450 Students may choose either the general group (which include various streams) or the science Page 3 of 92

4 group. Both groups require four additional subjects, each worth 100 marks. The Secondary School Certificate (SSC) Examination therefore has total maximum marks of 850. The following tables show the scheme of studies for the general and science groups prescribed in the 1995 curriculum: Scheme of Studies (1995) for Secondary School Certificate, General Group Subject Marks Weekly Periods Urdu English Pakistan Studies 75 3 Islamiat 75 3 Mathematics General Science subjects from Y list, or 1 subject from Y list +1 subject from Z list 100 x x 2 Total x 2 4 x 2 Scheme of Studies (1995) for Secondary School Certificate, Science Group Subject Marks Weekly Periods Urdu English Pakistan Studies 75 3 Islamiat 75 3 Mathematics Physics / 3 Chemistry / 3 Biology or Computer Science / 3 Total Physical physiology and hygiene 2. Geometrical and technical drawing 3. Geology 4. Astronomy and space science 5. Arts and model drawing 6. Environmental studies 7. Islamic studies or Islamic history 8. History of Indo-Pak. sub-continent 9. Arabic 10. Persian 11. Geography 12. Economics 13. Civics 14. Food and nutrition 15. Related art 16. Household accounts and related problems 17. Elements of home economics 18. Management for better homes 19. Clothing and textile 20. Child development and family living Y list of subjects Page 4 of 92

5 21. Military science 22. Commercial geography 23. Computer science 24. Music 25. Urdu literature 26. English literature 27. Sindhi 28. Punjabi 29. Pashto 30. Balochi 31. Gujrati 32. Turkish 33. Bangali 34. Chinese 35. French 36. Russian 37. German 38. Japanese 39. Spanish General Stream (100 marks each) 1. Education 2. Health and physical education 3. Elementary nursing and first aid 4. Calligraphy 5. Photography 6. Local (community) crafts 7. Computer education Z list of subjects Commercial Stream (50 marks each) Students must take typewriting (compulsory) and choose 1 subject from Nos. 2 to 8 1. Typewriting (compulsory) 2. Bookkeeping and accounting 3. Secretarial practice 4. Business methods 5. Salesmanship 6. Insurance 7. Banking 8. Import and export procedures Agriculture Stream (50 marks each) Students must take general agriculture (compulsory) and choose 1 subject from Nos. 2 to General agriculture (compulsory) 2. Farm education 3. Crop production 4. Livestock farming 5. Animal production 6. Productive insects and fish culture 7. Horticulture Industrial Stream Students select 1 subject from the following trade groups except the mechanical trades group. Each subject carries 100 marks including 50 marks for technical drawing. 1. Mechanical Trades Group: (Fitting is compulsory in Grade 9 for all students. In Grade 10, students continue fitting or choose one of the remaining trades). i. Fitting Page 5 of 92

6 ii. Turning iii. Plumbing iv. Welding v. Electro-plating vi. Moulding & casting 2. Electrical Trades Group i. Electrical Wiring ii. Electrical Winding iii. Household Appliances iv. Radio Servicing 3. Wood Trades Group i. Furniture and cabinet making ii. Wood carving and Inlay work iii. Joinery iv. Wood turning and Lacquer work 4. Draft Trades Group i. Mechanical Drafting ii. Civil Drafting Scheme of Studies, 2000 Curriculum Mathematics has been made a compulsory subject for all students. There are a total of five compulsory subjects with total maximum marks of 550: Compulsory Subject Mark Urdu/regional language 150 English 150 Islamiat/Islamiyat 75 Pakistan Studies 75 Mathematics 100 Subtotal 550 Students may choose from the science group, humanities group, technical group, and Islamic studies group. The Islamic studies group has been introduced as part of the government s efforts to mainstream religious education. Students must sit examinations in additional subjects from their chosen course group worth 300 marks. The total maximum marks of all subjects taken for the Secondary School Certificate Examination remain 850. The following tables show the scheme of studies for various course groups prescribed in the 2000 national curriculum. Scheme of Studies (2000) for Secondary School Certificate: Science Group Subjects Marks Weekly Theory Practical Total Periods Urdu (A+B) English (A+B) Islamiat for Muslims Ethics for non-muslims Pakistan Studies Mathematics Physics Chemistry Page 6 of 92

7 Biology or Computer Science or 1 Technical subject Total Scheme of Studies (2000) for Secondary School Certificate: Humanities Group Subjects Marks Weekly Theory Practical Total Periods Urdu (A+B) English (A+B) Islamiat for Muslims Ethics for non-muslims Pakistan Studies Mathematics General Science Social Science subjects or 1 Social Science subject + 1 Technical subject Total Scheme of Studies (2000) for Secondary School Certificate: Technical Group Subjects Marks Weekly Theory Practical Total Periods Urdu (A+B) English (A+B) Islamiat for Muslims Ethics for non-muslims Pakistan Studies Mathematics General Science Technical subjects Total Scheme of Studies (2000) for Secondary School Certificate: Darse Nizami [Islamic Studies] Group Subjects Marks Weekly Theory Practical Total Periods Urdu A+ Urdu B (Al Qawaid wal Insha) English (A+B) Seeratul Rasool (in lieu of Islamiat) Pakistan Studies Mathematics General Science Al Quran Al Hadith [sayings and deeds of Mohammed] Al Fiqah [Islamic jurisprudence] Total Art and Model Drawing 2. Islamic Studies 3. Islamic History Social Science Subjects Page 7 of 92

8 4. Geography 5. Economics 6. Management for Better Homes 7. Child Development and Family Living 8. Commercial Geography 9. Shorthand and Typing 10. Bookkeeping and Accounts 11. Business Methods 12. Secretariat Practice 13. Salesmanship 14. Banking and Insurance 15. Import and Export Procedure 16. Geometrical and Technical Drawing 17. Physiology and Hygiene 18. Geology 19. Astronomy and Space Science 20. Military Science 21. Environmental Studies 22. History of Indo-Pak Sub-continent 23. Civics 24. Food and Nutrition 25. Elements of Home Economics 26. Clothing & Textile 27. Computer Science 28. Physical Education 29. Education 30. Urdu Literature 31. English Literature 32. Arabic 33. Persian 34. Sindhi 35. Pushto 36. Punjabi 37. Balochi 38. Gujrati 39. Bengali 40. Turkish 41. French 42. Spanish 43. Chinese 44. Russian 45. Japanese 46. German Technical Subjects Phase I 1. Repair & Maintenance of domestic refrigerators & air conditioners 2. Radio & Tape Recorder repairing 3. Plumbing & Sanitary Fitting 4. Electrical Wiring 5. Wood Work (Boat making) 6. Auto Mechanic (Motorcycle & Scooters) 7. Computer Hardware 8. Repair & Maintenance of Household electrical appliances 9. Servicing and Minor repair of Tractors 10. Food Processing and Preservation Page 8 of 92

9 11. Poultry Farming 12. Beautician 13. Wood Working (Furniture making) 14. Welding (Gas & Electric) 15. Fish Farming 16. Dress Making & Fashion Designing 17. TV Repairing Phase II 1. Auto Electrician 2. Ceramics 3. Leather Goods Making 4. Minor Repair & Maintenance of Petrol Engine 5. Floriculture 6. Photography 7. Glass Work (Glass Blowing, Cutting & Framing) 8. Pottery (Cottage Industry) 9. Wheel Balancing & Vulcanizing 10. Sheet Metal Work 11. Minor Repair & Maintenance of Diesel Engine 12. Sericulture (Silk Worm) Raising 13. Stuffed Toys & Doll Making 14. Floral Work 15. Art and Painting & Calligraphy 16. Cooking & Baking 17. Embroidery and Knitting 18. Textile and Weaving 19. Carpeting 20. Sports Goods 21. Cutlery & Surgical Instruments 22. Metallurgy 23. Masonry/Building Construction 24. Book Keeping and Cash Handling 25. Computer Operating and Shorthand/Typing 26. Mining 27. Petroleum 28. Agro Industries 29. Farm Management Composite and Part Wise Examinations Depending on the year and examining board, the SSC examination may be either composite or part wise: The SSC composite examination is conducted at the end of Grade 10 The SSC (part wise/part system) examination is conducted in two parts, at the end of Grade 9 (SSC Part I) and at the end of Grade 10 (SSC Part II). A new scheme of part wise SSC examination introduced by the Ministry of Education around 2005 has total marks of The allocation of marks to subjects in Part I and Part II may vary by examining board. Part Wise SSC Examination (2005), Science Group (with Biology), Board of Intermediate & Secondary Education, Rawalpindi Subject Part I Part II Page 9 of 92

10 (Grade 9) (Grade 10) Theory Theory Practical Urdu English Islamiyat (Compulsory) Pakistan Studies Mathematics Physics Chemistry Biology Subtotal Total 1050 Part Wise SSC Examination (2008), Science Group (with Biology), Federal Board of Intermediate & Secondary Education (FBISE) Subject Part I (Grade 9) Part II (Grade 10) Theory Practical Theory Practical Urdu English Islamiyat (Compulsory) Pakistan Studies Mathematics Physics Chemistry Biology Subtotal Total 1050 Secondary School Certificate (SSC)/Matriculation Examination Certificate The minimum mark for passing each subject at the SSC Examination is 33%. The certificate usually indicates the chosen course group, total marks obtained for all subjects and the corresponding letter grade. A student who fails in one or two papers may repeat those subjects in compartmental exams conducted in the same year. A student who fails in more than two papers is required to repeat all subjects the following year. There is also the common practice of giving grace marks to students who fail one or two papers by a few percentage points to allow them to pass the examination. By passing all subjects in the board examination, students receive the Secondary School Certificate (SSC), also called Matriculation Examination Certificate. They also receive a detailed marks sheet. The SSC is required for entry into higher secondary school. The SSC holder may also seek admission into vocational and technical programs such as the three-year Diploma of Associate Engineer (DAE). Conclusion Secondary education in Pakistan requires graduation from middle school for admission and takes two years to complete, representing a total of 10 years of schooling. Upon completion of their study, students must sit external examinations administered by one of the Boards of Intermediate and Secondary Education or Boards of Technical Education to receive the Secondary School Page 10 of 92

11 Certificate or Matriculation Examination Certificate. The certificate allows an individual to seek employment or admission into higher secondary school or vocational and technical programs. Based on the above information and placement recommendations of other evaluation resources, IQAS compares the Secondary School Certificate or Matriculation Examination Certificate to the completion of Grade 10. Grading: Percentage marks are predominantly used. The Pakistani system is low marking, with 33% as the common minimum pass mark. The actual grading scale adopted may vary by examining board and time period. Grading scale information is usually provided on the certificates and may be available on the websites of the boards. The following table shows a grading scale adopted by many of the Boards of Intermediate and Secondary Education (BISEs) for their Secondary School Certificate (SSC) and Higher Secondary Certificate (HSC) examinations. The letter grades are assigned according to overall marks in all subjects. Six-Level Grading Scale, Secondary and Higher Secondary Education Percentage Marks (%) Letter Grade Descriptor 80 and above A One/A-1/A+ Outstanding/Distinction/Exceptional 70 and above but below 80 A Excellent 60 and above but below 70 B Very Good 50 and above but below 60 C Good 40 and above but below 50 D Fair 33 and above but below 40 E Satisfactory An older grading scale used by BISEs had 33% as the minimum pass mark and assigned divisions according to overall marks in all subjects: Traditional Grading Scale, Secondary and Higher Secondary Education Percentage Marks (%) Division 75 and above Distinction First Division Second Division Third Division Below 33 Fail Page 11 of 92

12 Date Entered: Dec 2008 Category: Secondary Credential Actual Name: Higher Secondary Certificate (HSC) Credential Alternate Actual Name(s): Intermediate Examination (Certificate) Country: PAKISTAN (Islamic Republic of Pakistan) Higher Secondary Certificate Time Period Credential Offered: Current Issuing Body: 25 Boards of Intermediate and Secondary Education (BISEs), which are all members of the Inter Board Committee of Chairmen (IBCC) Admission Requirements: Secondary School Certificate (SSC) or equivalent Program Description: Two-year upper secondary education program Provides Access to in the Home Country: Employment Admission into university and other postsecondary programs such as further vocational and technical training Placement Recommendations: The placement recommendations in the following published references were considered in the formulation of IQAS recommendations. IERF (International Educational Research Foundation): New Country Index, Ten Speed Press, 2004 (US) NOOSR (National Office of Overseas Skills Recognition). Country Education Profiles Online: PIER (Projects for International Education Research): The Admission and Academic Placement of Students from South Asia: Bangladesh, India, Pakistan, and Sri Lanka, Page 12 of 92

13 1986 (US) UK NARIC National Recognition Information Centre for the United Kingdom, International Comparisons. IQAS Recommendations: Generally compares to the completion of Grade 12 Course Equivalencies: 30-level (Grade 12) courses IQAS Rationale: Higher secondary education lasts two years (Grades 11-12), with entry based on the Secondary School Certificate (SSC) or equivalent, and caters for children aged 15 to 16. It is offered at both higher secondary schools and intermediate and degree colleges. It is often called the intermediate stage. An older term, FA (Faculty of Arts) and FS or FSc (Faculty of Science), is also used. The language of instruction is Urdu. Students must study a few compulsory subjects plus additional subjects based on a chosen course group. Upon the completion of their studies, they sit examinations administered by the various Boards of Intermediate and Secondary Education in order to receive the Higher Secondary Certificate (HSC) or Intermediate Certificate. The organization of the course groups changes with each revision of the national curriculum. The scheme of studies for different course groups prescribed by the 1995 and 2000 curricula are described below. Scheme of Studies, 1995 Curriculum In the 1995 Curriculum, there are four compulsory subjects for all students worth total maximum marks of 500: Compulsory Subject Mark Urdu 200 English 200 Islamic Education 50 Pakistan Studies 50 Subtotal 500 Students may choose the science group (which include several sub-groups), the humanities group, the medical technology group, or the home economics group (for girls), each with additional subjects worth 600 marks. The Higher Secondary Certificate (HSC) Examination therefore has total maximum marks of The following table shows the scheme of studies for the various course groups prescribed in the 1995 curriculum: Scheme of Studies (1995) for Higher Secondary Certificate Page 13 of 92

14 Group Subject Marks Urdu 200 Compulsory for all students English 200 Science Humanities Medical Technology Pakistan studies 50 Islamic education 50 Pre-Medical Physics, Chemistry and Biology 200 x 3 Pre-Engineering Physics, Chemistry and Mathematics 200 x 3 Mathematics, Physics, Statistics 200 x 3 General Mathematics, Economics, Statistics 200 x 3 Mathematics, Economics, Computer studies 200 x 3 Mathematics, Physics, Computer studies 200 x 3 Mathematics, Statistics, Computer studies 200 x 3 1 subject from set I, set II and set III each (see 200 x 3 following table for allowed subject combinations) Elementary anatomy and micro techniques 100 Haematology and blood banking 100 Microbiology I 100 Microbiology II 100 Clinical pathology and Serology 100 Elementary chemistry and Chemical pathology 100 Food and home management 200 Clothing and related arts 200 Home Economics (for girls) Child development and group behaviour, childcare 200 and home nursing Total for each group 1100 List of Subjects for Humanities Group Set I Set II Set III 1 Mathematics Statistics Psychology 2 Mathematics Statistics Geography 3 Economics Statistics Geography 4 Economics Islamic Studies Civics 5 History Islamic Studies Civics 6 History Islamic Studies Arabic/ Persian 7 Economics Islamic Studies Psychology 8 Islamic Studies Health & Phys. Ed. Urdu (advanced)/arabic 9 Library Science History Civics 10 Any other combination adopted by the examining boards Scheme of Studies, 2000 Curriculum As in the 1995 Curriculum, there are four compulsory subjects for all students worth total maximum marks of 500: Compulsory Subject Mark Urdu/Pakistan Culture (for foreigners) 200 English 200 Islamic Education/Civics (for non-muslims) 50 Pakistan Studies 50 Subtotal 500 The following table show the scheme of studies, in addition to the four compulsory subjects, for Page 14 of 92

15 various course groups prescribed in the 2000 national curriculum: Science Humanities Commerce Scheme of Studies (2000) for Higher Secondary Certificate Group Subject Marks Pre-Medical Physics, Chemistry, Biology Pre-Engineering Physics, Chemistry, Mathematics 1. Mathematics, Physics, Statistics 200 per 2. Mathematics, Economics, Statistics subject Science General 3. Mathematics, Economics, Computer Science 4. Mathematics, Physics, Computer Science 5. Mathematics, Statistics, Computer Science Grade 11 Grade 12 Choose three from the following: 1. Arabic/Persian/French/English(Elective)/Urdu (Elective) 2. Economics 3. Fine Arts 4. Philosophy 5. Psychology 6. Statistics 7. History of Modern World/Islamic History/ History of Muslim India/ History of Pakistan 8. Islamic Studies 9. Health and Physical Education 10. Sindhi (Elective) 11. Civics 12. Education 13. Geography 14. Sociology 15. Mathematics 16. Computer Science 17. Islamic Culture 18. Library Science 19. Outlines of Home Economics 1. Principles of Accounting 2. Principles of Economics 3. Principles of Commerce 4. Business Mathematics 1. Principles of Accounting 2. Commercial Geography 3. Computer Studies/Typing/Banking 4. Statistics 200 per subject Medical Lab Technology Group 2. Dental Hygiene Technology Group Medical 3. Operation Theatre Technology Group Technology 4. Medical Imaging Technology Group 5. Physiotherapy Technology Group 6. Ophthalmic Technology Group Total 600 Various examining boards may offer other course groups in addition to those listed in the national curriculum. Examples include nursing group, agricultural group, and military science group. Page 15 of 92

16 Composite and Part Wise Examinations Depending on the year and examining board, the HSC examination may be either composite or part wise: The HSC composite examination is conducted at the end of Grade 12 The HSC (part wise/part system) examination is conducted in two parts, at the end of Grade 11 (HSC Part I) and at the end of Grade 12 (HSC Part II). The following table shows the allocation of marks to subjects in Part I and Part II of the part wise HSC examination (pre-medical) conducted by Aga Khan University Examination Board: Higher Secondary Certificate Examination (2008 & 2009), Science Group (Pre-Medical), Aga Khan University Examination Board Marks Part I (Class XI) Part II (Class XII) Subjects Theory Practical Total English Compulsory I Urdu Compulsory I or Pakistan Culture I Islamic Education or Civics Physics I Chemistry I Biology I Subtotal 550 English Compulsory II Urdu Compulsory or Pakistan Culture II Pakistan Studies Physics II Chemistry II Biology II Subtotal 550 Higher Secondary Certificate (HSC)/Intermediate Examination Certificate The minimum mark for passing each subject is 33%. The certificate usually indicates the chosen course group, total marks obtained for all subjects and the corresponding letter grade. A student who fails in one or two papers may repeat those subjects in compartmental exams conducted in the same year. A student who fails in more than two papers is required to repeat all subjects the following year. There is also the common practice of giving grace marks to students who fail one or two papers by a few percentage points to allow them to pass the examination. After passing the examination, students receive the Higher Secondary Certificate (HSC) or Intermediate Examination Certificate, which is the prerequisite for entry into university undergraduate study. In addition to the HSC, students also receive a detailed marks sheet. The format of the HSC and marks sheet varies by issuing board and time period. Conclusion Higher secondary education in Pakistan requires a Secondary School Certificate or equivalent for admission and takes two years to complete, representing a total of 12 years of schooling. Upon completion of their study, students must sit external examinations administered by one of the Boards of Intermediate and Secondary Education to receive the Higher Secondary Certificate or Intermediate Examination Certificate. The certificate allows an individual to seek employment or Page 16 of 92

17 admission into universities. Based on the above information and placement recommendations of other evaluation resources, IQAS compares the Higher Secondary School Certificate or Intermediate Examination Certificate from Pakistan to the completion of Grade 12. Grading: Percentage marks are predominantly used. The Pakistani system is low marking, with 33% as the common minimum pass mark. The actual grading scale adopted may vary by examining board and time period. Grading scale information is usually provided on the certificates and may be available on the websites of the boards. The following table shows a grading scale adopted by many of the Boards of Intermediate and Secondary Education (BISEs) for their Secondary School Certificate (SSC) and Higher Secondary Certificate (HSC) examinations. The letter grades are assigned according to overall marks in all subjects. Six-Level Grading Scale, Secondary and Higher Secondary Education Percentage Marks (%) Letter Grade Descriptor 80 and above A One/A-1/A+ Outstanding/Distinction/Exceptional 70 and above but below 80 A Excellent 60 and above but below 70 B Very Good 50 and above but below 60 C Good 40 and above but below 50 D Fair 33 and above but below 40 E Satisfactory An older grading scale used by BISEs had 33% as the minimum pass mark and assigned divisions according to overall marks in all subjects: Traditional Grading Scale, Secondary and Higher Secondary Education Percentage Marks (%) Division 75 and above Distinction First Division Second Division Third Division Below 33 Fail Page 17 of 92

18 Date Entered: Dec 2008 Country: PAKISTAN (Islamic Republic of Pakistan) Diploma of Associate Engineer Category: Technical/Professional/Vocational Credential Actual Name: Diploma of Associate Engineer (DAE) Time Period Credential Offered: Current Issuing Body: Boards of Technical Education (NWFP, Punjab, and Sindh) and Board of Intermediate and Secondary Education (Balochistan) Admission Requirements: Secondary School Certificate (SSC), Matriculation Examination Certificate or equivalent in the required stream or course group (e.g. science group) Program Description: Three-year technical diploma program Provides Access to in the Home Country: Employment Admission to university undergraduate study DAE holders may apply to Bachelor of Technology (pass) programs or for reserved seats in Bachelor of Science (Engineering) programs at some universities. Placement Recommendations: The placement recommendations in the following published references were considered in the formulation of IQAS recommendations. IERF (International Educational Research Foundation): New Country Index, Ten Speed Press, 2004 (US) NOOSR (National Office of Overseas Skills Recognition). Country Education Profiles Online: PIER (Projects for International Education Research): The Admission and Academic Placement of Students from South Asia: Bangladesh, India, Pakistan, and Sri Lanka, 1986 (US) Page 18 of 92

19 UK NARIC National Recognition Information Centre for the United Kingdom, International Comparisons. IQAS Recommendations: Generally compares to the completion of a postsecondary Certificate. [Note: The first two years of the program are considered to be at a secondary level and the completion of Grade 12 is acknowledged.] IQAS Rationale: Diploma of Associate Engineer (DAE) programs are offered by polytechnics, monotechnics and colleges of technology. The first polytechnic was established in Karachi in 1953, and the first polytechnic for women in Lahore in There are now 200 polytechnics and monotechnics in the country, including 15 for women, with a total enrolment of about 60,000. The DAE involves three years of fulltime study. Students may have the option to complete the program in four years through part-time evening study. There are also some specialized DAE programs that involve four years of fulltime study. Entry to DAE programs is based on the Secondary School Certificate (science group), though a small number of applicants hold a Higher Secondary Certificate. The Boards of Technical Education (NWFP, Punjab and Sindh) and the Boards of Intermediate and Secondary Education (Balochistan) supervise the curricula, conduct annual examinations and award the diploma. DAE programs are offered in a range of engineering and non-engineering fields. Traditionally, civil, electrical and mechanical technologies are the three fields with the highest enrolments. The following table lists the courses of a DAE program in electrical technology: Diploma of Associate Engineer in Electrical Technology, NWFP. Board of Technical Education No. Courses First Year Second Year Third Year 1 Islamiat/Pakistan Studies Islamiat/Pakistan Studies Islamiat/Pakistan Studies 2 English Applied Mathematics-II Business Communication 3 Industrial Management Applied Mathematics-I Applied Physics & Human Relations 4 Business Management Applied Chemistry & Industrial Economics AC Machines 5 Computer Applications DC Machines & Batteries Power Plant & 6 Principles of Electrical Engineering Electrical Instruments & Measurements Energy Conservation Transmission, Distribution & Protection of Electrical Power Systems 7 Basic Electrical Drawing Utilization of Electrical Energy Telecommunication 8 Installation, Planning Repair & Maintenance Workshop Practice-I & Estimating of Electrical Equipments 9 Applications of Computers in Electrical Technology Digital & Industrial Electronics Page 19 of 92

20 10 Basic Electronics 11 workshop Practice-II (Basic Machine Shop) The DAE allows an individual to Seek employment as a technician or mid-level supervisor in an industrial or office setting Apply to the Institution of Engineers, Pakistan to become an associate, one of the eight classes of membership Seek admission to a Bachelor of Technology (pass) program at a college of technology Apply to the reserved seats for DAE graduates at a four-year B.Sc. Engineering program of an engineering college or university. The DAE must be in the same engineering discipline as the B.Sc. Engineering program. Only a small number of DAE holders are able to get into B.Sc. Engineering programs. Most of those who pursue further education choose B.Tech (pass) programs offered at colleges of technology. The colleges of technology are affiliated to universities, which award the B.Tech degree. The Pakistan Engineering Council (PEC) in collaboration with NAVTEC is developing criteria for DAE holders to register with the PEC as technologists and technicians. Conclusion The Diploma of Associate Engineer (DAE) requires a Secondary School Certificate (SSC) or equivalent (Grade 10) for admission and usually involves three years of fulltime study. The diploma allows an individual to seek employment or admission to some undergraduate programs such as B.Tech (pass) and Bachelor of Science (Engineering). In Canada, postsecondary certificate and diploma programs require Grade 12 for admission, with diploma programs generally involving at least two years of fulltime study and certificate programs less than two years; they provide access to employment and possible transfer of credit for admission into undergraduate programs. Based on the above information and placement recommendations of other evaluation resources, IQAS compares the Diploma of Associate Engineer (DAE) to the completion of a postsecondary Certificate. A note is appended to acknowledge the completion of Grade 12. Grading: Page 20 of 92

21 Grading scale for Diploma of Associate Engineer (DAE) programs is determined by the Provincial Boards of Technical Education and may vary by examining board and time period. Following is the grading scale currently adopted in Punjab. The letter grades are assigned according to overall marks in all subjects. Grading Scale, Diploma of Associate Engineer (DAE), Punjab Board of Technical Education Percentage Marks (%) Letter Grade 80 and above A A B C <50 but passing all subjects D To pass a course, one must obtain at least 40% in the theory component and 50% in the practical component. Page 21 of 92

22 Date Entered: Dec 2008 Category: University Credential Actual Name: Bachelor (Pass) Degree Country: PAKISTAN (Islamic Republic of Pakistan) Bachelor (Pass) Degree Credential Alternate Actual Name(s): Bachelor of Arts (BA) (Pass) Bachelor of Commerce (B.Com) (Pass) Bachelor of Science (B.Sc.) (Pass) Bachelor of Business Administration (BBA) (Pass) Bachelor of Home Economics (Pass) Bachelor of Information Technology (BIT) (Pass) Note: These are examples of the two-year bachelor (pass) degrees and do not constitute a complete list of such programs. Time Period Credential Offered: Current Issuing Body: Universities and Degree-Awarding Institutions (DAIs) Admission Requirements: Higher Secondary Certificate (HSC)/Intermediate Examination Certificate or equivalent in the required stream or group (e.g. humanities group, science group) Program Description: Two-year undergraduate degree program Provides Access to in the Home Country: Employment Admission to university graduate programs, upgraded four-year bachelor degree programs, postgraduate bachelor degree and diploma programs Placement Recommendations: The placement recommendations in the following published references were considered in the formulation of IQAS recommendations. IERF (International Educational Research Foundation): New Country Index, Ten Speed Page 22 of 92

23 Press, 2004 (US) NOOSR (National Office of Overseas Skills Recognition). Country Education Profiles Online: PIER (Projects for International Education Research): The Admission and Academic Placement of Students from South Asia: Bangladesh, India, Pakistan, and Sri Lanka, 1986 (US) UK NARIC National Recognition Information Centre for the United Kingdom, International Comparisons. IQAS Recommendations: Generally compares to the completion of two years of undergraduate study in xxx. IQAS Rationale: Traditional undergraduate education in Pakistan represents 14 years of schooling (12+2), with 12 years of school education followed by a two-year bachelor (pass) degree. The two-year pass degrees are typically offered in arts, commerce, and science Bachelor of Arts (BA), Bachelor of Commerce (B.Com) and Bachelor of Science (B.Sc.). Entry is based on the Higher Secondary Certificate (HSC)/Intermediate Examination Certificate or equivalent, which represents 12 years of schooling. Students are required to complete a number of courses (usually 3-5 per semester) or papers and pass two annual examinations (Part I and Part II). These are general programs with no area of specialization and no thesis requirement. Pass degree programs are mostly offered at affiliated colleges, with the affiliating universities conducting the annual examinations at the end of the academic year and awarding the degrees. Internal assessment by the colleges accounts for a small percentage of the total marks. Following is a sample program structure of B.Com: Bachelor of Commerce, Dadabhoy Institute of Higher Education Duration: 2 years Entry Requirement: Intermediate/A-Level Graduation Requirement: 40% pass in each subject and 45% in aggregate Paper Marks Part I I. Islamic Studies/Ethics and Pakistan Studies 100 II. Functional English (Compulsory) 100 III. Introduction to Business 100 IV. Principles of Accounting 100 V. Business Mathematics and Statistics 100 VI. Economic Analysis and Policy 100 Part II I. Business Communication 100 Page 23 of 92

24 II. Principles of Management 100 III. Economic Development of Pakistan 100 IV. Advanced Accounting and Cost Accounting 100 V. Business and Industrial Law 100 VI. Optional Paper (choose one): 100 Auditing and Income Tax Law Introduction to Computer Application in Business Principles of Marketing Principles of Insurance Banking and Finance Total 1200 In addition to arts, commerce and science, two-year bachelor (pass) degrees are also available in a few specialized areas such as business administration (BBA), home economics, and Information Technology (BIT). The B.Sc. (Home Economics) is offered as a two-year program following HSC or a four-year program following completion of secondary school (Grade 10). A bachelor (pass) degree gives an individual access to further education. Options include general master s degree (e.g. MA, M.Com or M.Sc.), postgraduate bachelor degree (e.g. B.Ed), and postgraduate certificate and diploma programs. Some universities offer two-year programs that upgrade a bachelor (pass) degree to a four-year degree. Conclusion Offered by university-affiliated colleges, the bachelor (pass) degree program requires a Higher Secondary Certificate (HSC) or equivalent (Grade 12) for admission and involves two years of fulltime study, representing a total of 14 years of education. The degree allows an individual to seek employment or admission into general master s degree, upgraded four-year bachelor degree, postgraduate bachelor degree, and postgraduate certificate and diploma programs. Based on the above information and placement recommendations of other evaluation resources, IQAS compares the two-year Bachelor (pass) degree from Pakistan to the completion of two years of undergraduate study in xxx. Page 24 of 92

25 Grading: A combination of percentage marks, letter grades and grade points (also called quality points) are used in higher education. Grading scale varies by institution, the level and field of the program, and time period. The marks sheets issued by the universities usually provide grading information. Traditionally, the Pakistani system is low marking. There is a traditional scale that features a 33% pass and assigns divisions according to overall marks in all subjects. It may still be in use at a few institutions. Traditional Grading Scale, Higher Education Percentage Marks (%) Division 75 and above Distinction First Division Second Division Third Division Below 33 Fail Institutions today usually have 40%, 50% or 60% as the minimum pass mark. As the following examples indicate, there is a great variety in the alignment of percentage marks with letter grades and grade points. Grading Scale, Allama Iqbal Open University Percentage Marks (%) Letter Grade 80 and above A A B C D Below 40 Fail Grading Scale, University of Agriculture, Faisalabad Letter Grade Grade Percentage Marks (%) Descriptor Points A Excellent B Good C Satisfactory D Pass F 0 Below 40 Fail Grading Scale, Bachelor of Science (BS) program, Sir Syed University of Engineering & Technology, Karachi Letter Grade Grade Percentage Descriptor Points Marks (%) A Excellent A Very Good B Good B Above Average C Average C Satisfactory D Pass F 0.0 Below 40 Fail Page 25 of 92

26 Grading Scale, City University of Science and Technology, Peshawar Percentage Marks (%) Letter Grade Grade Points A A B B C C D 1.50 Below 50 F Fail Withdrawal W - Incomplete I - Grading Scale for Graduate Programs, NED University of Engineering and Technology, Karachi Letter Grade Grade Points Percentage Marks (%) Descriptor A Excellent B Very Good B Good C Above Average C Average D Fair D Pass F 0.0 Below 50 Fail S - - Satisfactory (for dissertation) U - - Unsatisfactory (for dissertation) P Pass in non-credit course X - - Exempted I - - Incomplete Grading Scale, Dadabhoy Institute of Higher Education Percentage Marks (%) Letter Grade Grade Points A A B C 2.5 Below 60 F 0.0 Withdrawal W 0.0 Incomplete I 0.0 Grading Scales, University of Sindh Letter Grade Grade Points Percentage Descriptor Marks (%) Common Grading Scale A Excellent B 3-< Good C 2-< Satisfactory/Average D 1-< Pass F 0 <40 Fail Page 26 of 92

27 W 0 - Withdrawn from course R 0 - Research in progress Grading Scale for Pharmacy Programs A and above Excellent B 3-< Good C 2-< Satisfactory/Average D 1-< Pass F 0 < 50 Fail Grading Scale for Business Administration Programs A and above Excellent B 3-< Good C 2-< Satisfactory/Average F 0 < 60 Fail Page 27 of 92

28 Date Entered: Dec 2008 Category: University Credential Actual Name: Bachelor (Honours) Degree Country: PAKISTAN (Islamic Republic of Pakistan) Bachelor (Honours) Degree (3 Years) Credential Alternate Actual Name(s): Bachelor of Arts (BA) (Honours) Bachelor of Commerce (B.Com) (Honours) Bachelor of Science (B.Sc.) (Honours) Bachelor of Business Administration (BBA) (Honours) Bachelor of Fine Arts (BFA) (Honours) Bachelor of Information Technology (BIT) (Honours) Note: These are examples of three-year bachelor (honours) degrees and do not constitute a complete list of such programs. Time Period Credential Offered: Current Issuing Body: Universities and Degree-Awarding Institutions (DAIs) Admission Requirements: Higher Secondary Certificate (HSC), Intermediate Examination Certificate or equivalent in the required stream or group (e.g. humanities group, science group) Program Description: Three-year undergraduate degree program Provides Access to in the Home Country: Employment Admission to university graduate degree programs, postgraduate bachelor degree and diploma programs Placement Recommendations: The placement recommendations in the following published references were considered in the formulation of IQAS recommendations. IERF (International Educational Research Foundation): New Country Index, Ten Speed Page 28 of 92

29 Press, 2004 (US) NOOSR (National Office of Overseas Skills Recognition). Country Education Profiles Online: PIER (Projects for International Education Research): The Admission and Academic Placement of Students from South Asia: Bangladesh, India, Pakistan, and Sri Lanka, 1986 (US) UK NARIC National Recognition Information Centre for the United Kingdom, International Comparisons. IQAS Recommendations for: Generally compares to the completion of a three-year Bachelor s degree with a focus in xxx. IQAS Rationale: Some universities offer three-year bachelor (honours) degrees in general areas (e.g. arts, commerce and science). Like the two-year bachelor (pass) degrees, they require Higher Secondary Certificate, Intermediate Examination Certificate or equivalent for admission. There are also one-year programs that upgrade a bachelor (pass) degree to a bachelor (honours) degree. Students must complete a number of courses (usually 3-5 per semester) or papers and pass three annual examinations (Part I, Part II and Final). Unlike two-year degrees, these programs usually have areas of specialization, such as BA (English), BA (Philosophy), B.Sc. (Geology), B.Sc. (Forestry), etc. There is no thesis requirement. In addition to arts, commerce, and science, three-year bachelor (honours) degrees are also available in a few other areas such as business administration (BBA), fine arts (BFA), education, and IT. A bachelor (honours) degree gives an individual access to further education. Options include general master s degree (e.g. MA, M.Com or M.Sc.), postgraduate bachelor s degree (e.g. B.Ed), and postgraduate certificate and diploma programs. It takes holders of a three-year honours degree one year to complete a general master s degree program as compared with two years for holders of a two-year pass degree. The three-year bachelor (honours) degree programs are being phased out and replaced by fouryear bachelor (honours) degrees. Conclusion The bachelor (honours) degree requires a Higher Secondary Certificate (HSC) or equivalent (Grade 12) for admission and involves three years of fulltime study, representing a total of 15 years of education. The degree allows an individual to seek employment or admission into general master s degree, postgraduate bachelor degree, and postgraduate certificate and diploma Page 29 of 92

30 programs. Based on the above information and placement recommendations of other evaluation resources, IQAS compares the three-year Bachelor (honours) degree from Pakistan to the completion of a three-year Bachelor s degree with a focus in xxx. Grading: A combination of percentage marks, letter grades and grade points (also called quality points) are used in higher education. Grading scale varies by institution, the level and field of the program, and time period. The marks sheets issued by the universities usually provide grading information. Traditionally, the Pakistani system is low marking. There is a traditional scale that features a 33% pass and assigns divisions according to overall marks in all subjects. It may still be in use at a few institutions. Traditional Grading Scale, Higher Education Percentage Marks (%) Division 75 and above Distinction First Division Second Division Third Division Below 33 Fail Institutions today usually have 40%, 50% or 60% as the minimum pass mark. As the following examples indicate, there is a great variety in the alignment of percentage marks with letter grades and grade points. Grading Scale, Allama Iqbal Open University Percentage Marks (%) Letter Grade 80 and above A A B C D Below 40 Fail Grading Scale, University of Agriculture, Faisalabad Letter Grade Grade Percentage Marks (%) Descriptor Points A Excellent B Good C Satisfactory D Pass F 0 Below 40 Fail Grading Scale, Bachelor of Science (BS) program, Sir Syed University of Engineering & Technology, Karachi Letter Grade Grade Percentage Descriptor Points Marks (%) A Excellent A Very Good B Good B Above Average Page 30 of 92

31 C Average C Satisfactory D Pass F 0.0 Below 40 Fail Grading Scale, City University of Science and Technology, Peshawar Percentage Marks (%) Letter Grade Grade Points A A B B C C D 1.50 Below 50 F Fail Withdrawal W - Incomplete I - Grading Scale for Graduate Programs, NED University of Engineering and Technology, Karachi Letter Grade Grade Points Percentage Marks (%) Descriptor A Excellent B Very Good B Good C Above Average C Average D Fair D Pass F 0.0 Below 50 Fail S - - Satisfactory (for dissertation) U - - Unsatisfactory (for dissertation) P Pass in non-credit course X - - Exempted I - - Incomplete Grading Scale, Dadabhoy Institute of Higher Education Percentage Marks (%) Letter Grade Grade Points A A B C 2.5 Below 60 F 0.0 Withdrawal W 0.0 Incomplete I 0.0 Grading Scales, University of Sindh Letter Grade Grade Points Percentage Descriptor Marks (%) Common Grading Scale A Excellent B 3-< Good Page 31 of 92

32 C 2-< Satisfactory/Average D 1-< Pass F 0 <40 Fail I 0 - Incomplete W 0 - Withdrawn from course R 0 - Research in progress Grading Scale for Pharmacy Programs A and above Excellent B 3-< Good C 2-< Satisfactory/Average D 1-< Pass F 0 < 50 Fail Grading Scale for Business Administration Programs A and above Excellent B 3-< Good C 2-< Satisfactory/Average F 0 < 60 Fail Page 32 of 92

33 Country: PAKISTAN (Islamic Republic of Pakistan) Bachelor (Honours) Degree (4-5 Years) Date Entered: Sep 2008 Category: University Credential Actual Name: Bachelor (Honours) Degree Credential Alternate Actual Name(s): Bachelor of Arts (BA) (Honours) Bachelor of Commerce (BCom) (Honours) Bachelor of Science (B.Sc./BS) (Honours) Bachelor of Architecture (5 Years) Bachelor of Science in Agriculture Bachelor of Science in Agricultural Engineering Bachelor of Science in Animal Husbandry Bachelor of Engineering (BE) Bachelor of Science in Engineering (B.Sc. Engg.) Bachelor of Science in Nursing Bachelor of Science in Pharmacy Note: These are examples of the four/five-year bachelor degrees and do not constitute a complete list of such programs. Time Period Credential Offered: Current Issuing Body: Universities and Degree-Awarding Institutions (DAIs) Admission Requirements: Higher Secondary Certificate, Intermediate Examination Certificate or equivalent in the required stream or group (e.g. pre-engineering) Program Description: Four-year (or five-year) undergraduate degree program Provides Access to in the Home Country: Employment Admission to university graduate degree programs, postgraduate bachelor s degree and diploma programs Placement Recommendations: Page 33 of 92