Organizing Committee, International Advisory Committee and Conference Executive Committee

Size: px
Start display at page:

Download "Organizing Committee, International Advisory Committee and Conference Executive Committee"

Transcription

1 Contents Preface Organizing Committee, International Advisory Committee and Conference Executive Committee xxiii XXV Keynote Paper Machining of Precision Parts and Microstructures E.Brinksmeier, O.Riemer, R.Stern Roles of Quantum Nanostructures in Advanced Electronics H.Sakaki Design of New Precision Machine Elements A.H.Slocum Part I Cutting / Special machining The Concept of Active Deflection Compensation and its Application in Precision Forging E.Doege, J.Baumgarten, T.Neumaier Coining of Thin Plates to Produce Micro Channel Structures G.Hirt, B.Rattay Three-dimensional Micro-Forming Process of Thin Film Metallic Glass in the Supercooled Liquid Region S.Hata, Y,Liu, T,Kato, A.Shimokohbe Precision Cold Forging Methods for Reduction of Working Pressure K.K.Tong, T.Muramatsu, C.M.Choy, S.X.Zhang, M.Enggalhardjo Burr Formation in Micro-Machining Aluminum, 6061-T6 K.Lee, B.Stirn, D.A.Dornfeld

2 Micro Structuring of High Aspect Ratio and Array by Means of Mechanical Machining K.Sawada, T.Kawai, Y.Takeuchi Influence of Micro Machining on Strength Degradation of a Silicon Nitride Ceramic M.Wakuda, Y.Yamauchi, S.Kanzaki Micro Material Processing Using UV Laser and Femtosecond Laser H.K.Tönshoff, A.Ostendorf, K.Körber, C.Kulik, G.Kamlage Subnanometer Fabrication of Optics by Plasma Chemical Vaporization Machining H.Takino, T.Kobayashi, T.Yamamoto, N.Shibata, Y.Gomei, K.Sugisaki 67 Micro Fabrication Using EDM Deposition S.Hayakawa, R.I.Ori, F.Itoigawa, T.Nakamura, T.Matsubara Manufacture of Aspherical Fresnel Lens with Ideal Cross-sectional Profile with Oxygen-free Copper and Acrylic Resin N.Sornsuwit, Y.Takeuchi, T.Kawai, K.Sawada, T.Sata Non-circular Machining Using Two Convex Milling Cutters Y.Nakao A Method to Machine Three-Dimensional Thin Parts H.Obara, T.Watanabe, T.Ohsumi, E.Ninomiya, M.Hatano Control of Surface Pattern of Mold Generated by Ball-End Milling A.Saito, X.Zhao, M.Tsutsumi High-Speed Cutting Fundamentals and Machine Tool Development H.K.Tönshoff, T.Friemuth, P.Andrae, C.Lapp Dry Cutting of Stainless Steel Using Indexable Inserts Having Self-heat Absorbing Capability M.Murakawa, M.Jin Measurement of Lubricant Applying Effect Influence on Lubrication by Oil-Submerged Cutting T.Kaneeda vi

3 Development of Inclined Ultrasonic-Vibration Cutting Tool Capable of Mounting Commercial Indexable Inserts M.Jin, M.Murakawa The Greentape Laser Sintering Method and its Applications K.Maekawa, T.Nishii, S.Iida, T.Suzuki Conceptual Data Model for Advanced Rapid Prototyping K.G.Kobayashi, M.Fujii, F.B.Prinz Machine Parts Manufacturing by Sheet Steel Lamination Technology J.Shinozuka, M.Yoshino, T.Obikawa Textured Surface Produced by Anisotropic Etching of Silicon and its Frictional Properties N.Moronuki, D.Nishi, K.Uchiyama A Mechanical Vibration Assisted Plasma Etcher for Etch Rate Improvement T.Hatsuzawa, M.Hirosawa, M.Hayase, T.Oguchi Micromolding of Three-Dimensional Components W.N.P.Hung, Y.Ngothai, S.Yuan, C.W.Lee, M.Y.Ali Surface Roughness of FIB Sputtered Silicon M.Y.Ali, N.P.Hung, S.Yuan Micromachining in the Third Dimension F.Klocke, O.Ruebenach, T.Noethe Optimization of Deep Hole Drilling Processes with Smallest Drilling Diameters U.Heisel, M.Stortchak, R.Eisseler Prediction of High Frequency Vibration in Fine Boring by Extended Chatter Model E.Edhi, T.Hoshi Thrust Force Analysis of Drilling Burr Formation Using Finite Element Method S.Min, J.Kim, D.A.Dornfeld Basic Studies on the Wear Behaviour of Modified and Coated vii

4 Diamond Tools for Precision Machining of Ferrous Materials E.Brinksmeier, R.Gläbe Difference in Wear Patterns of Diamond Cutting Tool Depending on Work Materials H.Tanaka, S.Shimada, N.Ikawa, M.Higuchi, K.Obata Ductile Mode Cutting of Single-crystal Silicon by Ultrasonic Vibration S.Koshimizu, J.Otsuka Regenerative Chatter Vibration in Ball End Milling of Curved Surfaces B.W.Ikua, H.Tanaka, F.Obata, S.Sakamoto Ultra-High Speed Discharge Control for Micro Electric Discharge Machining S.Hara, N.Nishioki Study of Contouring Micro EDM Characteristics Z.Yu, K.P.Rajurkar, P.D.Prabhuram Development of Desk-top Micro Electric Discharge Machine S.Koga, N.Nishioki, S.Hara Improving Process Characteristics of DRY-WEDM C.Furudate, M.Kunieda, Y.Z.Bo, H.Yamada U-shaped Curved Hole Creation by Means of Electrical Discharge Machining T.Ishida, Y.Takeuchi High Performance Slicing Method of Monocrystalline Silicon Ingot by Wire EDM Y.Uno, A.Okada, Y.Okamoto, T.Hirano Laser Ablation of Sapphire with a Pulsed Ultra-Violet Laser Beam S.Tamura, H.Horisawa, S.Yamaguchi, N.Yasunaga Metal Deposition on Glass by Laser Irradiation from Metal Powders H.Tokura, H.Hidai viii

5 Ultra-Precision Cutting of Difficult-to-cut Metals S.Sakamoto, H.Yasui, M.Kawada, S.Kondo A Study on Metal Cutting under High Hydrostatic Pressure M.Liu, J.Takagi A New Interpolation Algorithm for Ultra-precision CNC Machining S.Li, M.Zhang, Y.Dai, X.Xie Six-Axis Control Character Line Finishing Using Ultrasonic Vibrational Cutting Tool K.Morishige, Y.Takeuchi A New Diamond Turning Method for Fabrication of Convex Aspheric Surface on Hard Brittle Material J.Yan, K.Syoji, T.Kuriyagawa Fracture Phenomena of Aramid Fiber During Oblique Cutting E.Nakanishi, K.Isogimi Development of a Practical Laser-Guided Deep-Hole Boring Tool: Working Characteristics of Its Components A.Katsuki, H.Onikura, T.Sajima, Y.Yuge, H.Murakami, T.Katayama Oil Film on Water Fog Metalworking Fluid T.Nakamura, T.Matsubara, F.Itoigawa, K.Kawata On the On-set of Chip Formation and the Process Stability in Cutting at Atomic Level R.Rentsch Analysis of Tool Temperature in High-Speed Milling H.Sasahara, T.Nitta, K.Nishi Research on Precise Cutting Performance of CVD Diamond H.Zhang, Y.Yao, Z.Yuan Machinability of TiAl Intermetallic Compounds T.Furusawa, A.Ichikawa, H.Hino, S.Tsuji, S.Koroyasu ix

6 MDS Study on the Effect of Cutting Edge Radius of Diamond Tools in Nanometric Cutting Process for Brittle Materials D.Li, S.Dong, Y.Liang, X.Luo, K. Cheng 294 An Attempt to Develop a Short Lasting Machinability Test for Steels J.C.Hamann, F.Meslin, Mactest Micro Surface Damage Detecting and Repairing System by Precise Micro Robots H.Aoyama, S.Miyamoto, R.Watanabe Effect of Minimal Quantities of Lubricant in Micro Milling JRS.Prakash, M.Rahman, A.S.Kumar, SC.Lim Development of MEMS IC Probe Card Utilizing Fritting Contact T.Itoh, K.Kataoka, T.Suga Simulation of WEDM Using Discharge Location Searching Algorithm F.Han, M.Kunieda, T.Sendai, Y.Imai Comparative Study of HSM and EDM in Injection Mould Manufacturing M.R.Alam, K.S.Lee, M.Rahman, Y.F.Zhang, Y.D.Li, K.S.Sankaran Net-Shaping via Aluminium Foaming Y.P.Kathuria Development of Warm Forming Technique to Produce Thin Wall Magnesium Components M.S.Yong, B.H.Hu, M.Enggalhardjo, C.M.Choy Gas Flow Characteristics in a Laser Cut Kerf H.Horisawa A New Method for Reduction of Residual Stress of Welded Joint Using Ultrasonic Vibrational Load S.Aoki, S.Hirai, T.Nishimura, T.Hiroi Three-dimensional Microcasting H.Noguchi, M.Murakawa x

7 Improvement of Properties of SiC Mirror Surface Epitaxially Grown on Silicon Substrate A.Kakuta, K.Hashimoto, N.Moronuki, Y.Furukawa 354 Part II Grinding / polishing / ultra-precision machining Precision Grinding of Micro Aspherical Surface H.Suzuki, O.Horiuchi, H.Shibutani, T.Higuchi Mirror Grinding of Silicon Wafer with Silica EPD Pellets T.Fukazawa, N.Fuwa, J.Ikeno, H.Shibutani, O.Horiuchi, H.Suzuki New Fabrication Process of Deep Paraboloidal Mirror by Combination of ELID-Grinding and Electro-forming Techniques for Laman Spectroscopy Instrument H.Ohmori, J.Guo, W.Lin, T.Matsuzawa, S.Morita, H.Sato, H.Tashiro 371 A Study on the Surface Integrity of Single Crystal Silicon Ground by CIFB-diamond Wheels (ELID) and Resin-bonded Diamond Wheels C.L.Chao, K.J.Ma, D.S.Liu, S.C.Sheu, Y.S.Lin, H.Y.Lin A Study on Scratch Reduction Using the Sonic Dispersion of CMP Slurry S.H.Cho, H.J.Kim, H.Y.Kim, K.J.Kim, H.D.Jeong A Study on the Chemical Mechanical Micro Machining (C3M) of Silicon S.C.Jeong, J.M.Park, H.D.Jeong 386 Development of a Lapping Film Utilizing Agglomerative Superfine Silica Abrasives for Edge Finishing of a Silicon Wafer T.Enomoto, Y.Tani, K.Orii Cryogenic Polishing Method of Optical Materials F.Zhang, R.Han, Y.Liu, S.Pei Characteristics of Small Rotary Tool in Polishing of Fused Silica C.Liu, T.Kasai, H.Ohmori, W.Lin Development of Electrostrictive Polyurethane(PU) Films and its Characterization E-S Jeong, H-S Park, H-D Jeong, N-J Jo xi

8 Precision Machining of Future Silicon Wafers F.Klocke, D.Pähler High Speed Grinding Performance and Material Removal Mechanism of Silicon Nitride H.Huang, L.Yin Precision Manufacturing of Micro Moulding Tools of Glass and Sintered Carbide H.W.Hoffmeister, A.Wenda An Experimental Study on Bore Honing Operation - Influence of Unequal Over-run on Geometrical Error - J.Akbari Investigations Regarding the Operating Range of Ultra Thin Grinding Wheels on AlTiC H.H.Gatzen, C.Morsbach, GM.Jones Errors Analysis of Ball-Headed Wheel Discharge Dressing and Study on Grinding Experiments in Ultra-precision Aspheric Grinding System M.Chen, S.Dong, F.Zhang, D.Li Simulation on High Integrity Surface Generation of 300 Si Wafer with Fixed-Abrasive Solution K.Sagawa, H.Eda, L.Zhou, J.Shimizu Effect of Wheel Revolutional Speed on Striped Pattern on Surfaces Finished by High-Speed Reciprocation Grinding N.Yoshihara, T.Kuriyagawa, K.Syoji Mechanisms for the Formation of Glossy Workpiece Surface in Grinding and Polishing of Natural Stones H.Huang, X.Xu, H.Xu Mechanical Properties and Grinding Characteristics of High Purity Polycrystalline CBN Grits Y.Ichida, Y.Morimoto, R.Sato, M.Saijo, T.Koinuma Influence of Cutting Edge Wear on Ductile-mode Grinding of Fine Ceramics with Coarse Grain Size Diamond Wheel H.Yasui, Y.Hiraki, M.Sakata, M.Tsurusaki, Y.Murayama, S.Sakamoto 461 xii

9 Study on Internal Grinding of Small Bore - Influence of Bearing Characteristics on Grinding Accuracy - K.Yamauchi, J.Takagi A Basic Study on Profile Grinding with ELID H.Shindo, H.Ohmori, T.Kasai Grinding Characteristics of Cemented Carbide Concave Mirror by Desk-top Type 4-Axes Machine "TRIDER-X" with ELID System Y.Uehara, H.Ohmori, Y.Yamagata, S.Moriyasu, S.Morita, K.Yoshikawa, M.Asami, T.Miura Finish Surface Grinding of Titanium Alloys Z.Yuan, B.Zhu, Z.Lu, F.Zhang Flattening of Micro-Functional Parts by ELID Lap Grinding N.Itoh, H.Ohmori, Y.Yamagata, S.Moriyasu, T.Kasai Development of Small Tool by Micro Fabrication System Applying ELID Grinding Technique Y.Uehara, H.Ohmori, Y.Yamagata, S.Moriyasu, W.Lin, K-I Kumakura, S-Y Morita, T.Shimizu, T.Sasaki Effect of Polishing Pads in Finishing of Large Optical Elements W.Lin, H.Ohmori, Y.Yamagata, S.Moriyasu, C.Liu,, T.Kasai Effects of Changes in Fluid Composition on Magnetorheological Finishing (MRF) of Glasses and Crystals S.D.Jacobs, S.R.Arrasmith, I.A.Kozhinova, S.R.Gorodkin, L.L.Gregg, H.J.Romanofsky, T.D.BishopII, A.B.Shorey, W.I.Kordonski 501 Study of Magnetic Abrasive Finishing Process Using Pulsed Finishing Pressure and Its Processing Characteristics S.Yin, T.Shinmura Chain Forming Process of Magnetic Brush Development System Used in Laser Printer N.Nakayama, H.Kawamoto, M.Yamaguchi, J.Wiphut xiii

10 Part III Machine / element / measurement Invited paper: Precision Machine Tools M.Weck, R.Hilbing, C.Peschke Effects of Bearing Surface Geometries on the Inclination Stiffness of Aerostatic Thrust Bearings S.Ohishi, K.Tanaka, T.Masada Development of a Three Axes Travelling Column Ultraprecision Milling Machine A.Herrero, R.Bueno Development of Hydrostatic Bearings with Groove Structures M.Weck, J.Hennig, M.Winterschladen Assessment of Thermophysical Properties at Design Stage of Machine Tool Structure with Thermal Symmetricity M.Okabe, H.Sakamoto, S.Shimizu Concrete-Based Constrained Layer Damping E.Bamberg, A.H.Slocum Effects of Manufacturing Errors on the Accuracy for TRR-XY Hybrid PKM T-H Chang, S-L Chen, M-H Hsei Effect of Static Stiffness of Grinding Systems on a Generating Mechanism of Workpiece Geometrical Accuracy H-S Lee, Y.Uchida Development of a New Reseatable Mechanism with High Accurate Positioning Reproducibility S.Koga, N.Nishioki Compensation of Periodic Errors by Gain Tuning in Multi-Probe Sensors I.Godler, T.Ninomiya xiv

11 Precision Positioning of a Surface Motor-Driven XY a Surface Encoder W.Gao, T.Nakada, S.Kiyono Stage Using 569 Feedforward Tracking Controller Design Based on a Limited Bandwidth Desired Model L.Wang, F.Zhang, B.Su Fuzzy-PID Hybrid Vibration Control of Slide Carriage of Ultraprecision Machine Tool D.Shen, W.Jiachun, L.Dan Invited paper: Nanometrology - The Frontier of Precision R.J.Hocken Development of Ultraprecision 5-Axis Machine Tool Equipped with Elliptical Vibration Cutting Device T.Moriwaki, E.Shamoto, K.Tanaka, M.Matsuo, M.Osada Development of On-machine Profile Measuring System with Contact-type Probe S.Moriyasu, S.Morita, Y.Yamagata, H.Ohmori, W.Lin, J.Kato, I.Yamaguchi An Instrument to Measure the Stiffness of MEMS Mechanisms J.Qiu, J.Sihler, J.Li, V.Sturgeon, M.Smith, A.Slocum Development of X-ray Stepper with High Overlay Accuracy for 100-nm LSI Lithography M.Fukuda, H.Morita, T.Haga, M.Suzuki, H.Tsuyuzaki, A.Shibayama, S.Ishihara, H.Aoyama, S.Mitsui, T.Taguchi, Y.Matsui 604 Wide Range Capacitive Gap Sensor with Reproducible Nano-meterorder Resolution N.Ishikawa, N.Nishioki Design and Development of Multi-Function Sensor Using a Group of Micro Cantilevers K.Uchiyama, N.Moronuki xv

12 A Tool to Estimate the Adhesive Forces between Microcomponents Among each other and between Microcomponents and Grippers or Magazines J.Hesselbach, C.Graf High Precision Collimation Using Talbot Interferometry S.Haramaki, S.Yokozeki, A.Hayashi, H.Suzuki A Novel Approach for Simultaneous Measurement of the Linear Guide way Errors of a Machine Tool with a Volumetric Optical Encoder U.Mueller, Y.Kagawa, K.Yamazaki, J.Braasch Evaluation of Stages of Nano-CMM M.Fujiwara, A.Yamaguchi, K.Takamasu, S.Ozono Evaluation Method of Thermal Displacement of Machine Tools S.Shimizu, N.Imai Taut Wire Straightedge Reversal Artifact J.G.Salsbury, R.J.Hocken Automated System for Three-Dimensional Roughness Testing J.Rudzitis, J.Krizbergs, M.Skurba Development of Micro-roughness Measuring Probe Using Longitudinal Tapping Mode by Ultrasonic Vibration Sensor A.Saitoh, K.Hidaka, T.Yamagiwa, K.Nishimura Effects of Surface Roughness of Si Substrate and Pt-C Multilayer Coated Film on X-Ray Reflectivity Y.Namba, K.Zushi, T.Tanaka, K.Yamashita, Y.Tawara, T.Okajima Detection of Surface Defects on Steel Ball in Bearing Production Process Using a Capacitive Sensor : Performace of Prototype System T.Matsuda, M.Sato, T.Yata, A.Kakimoto Advanced 3D-Measuring Techniques for Quality Control of Cutting Inserts J.Leopold, I.Inasaki Autonomous Profiling Measurement of Two Dimensional Section FormsUsing Small-sized Ultrasonic Probe K.Matsuki, K.Hidaka xvi

13 Interferometry with Null Optics for Testing Aspherical Surfaces at 1nm Accuracy T.Gemma, S.Nakayama, H.Ichikawa, T.Yamamoto, Y.Fukuda, T.Onuki, T.Umeda 679 Analysis of Defects on Filmed Wafer -Evaluation of CMP Defect Detection Schemes Using Computer Simulation(BEM)- T.Ha, T.Miyoshi, Y.Takaya, S.Takahashi 684 Palmtop Pantograph Mechanism with Large-Deflective Hinges for Miniature Surface Mount Systems M.Horie, T.Uchida, D.Kamiya 689 Dynamics of Pin Electrode in Pin-To-Plate Gas Discharge System Used for Ozone-less Charger in Laser Printer H.Kawamoto, K.Takasaki, H.Yasuda, N.Kumagai 694 Effects of Part Flexibility on Dynamic Behaviors of Machine Systems with Clearances in the Joints Y.Wuyong, J.Linhong,J.Dewen 699 Analysis of Feed Drive System of X-Y Table Considering the Friction Q.Sun, X.Mei, M.Tsutsumi 704 Rotational Accuracy and Positioning Resolution of an Air-bearing Spindle with Active Inherent Restrictors H.Mizumoto, S.Arii, M.Yabuya 709 Precision Control of Radial Magnetic Bearing X.Zhang, T.Shinshi, L.Li, K-B Choi, A.Shimokohbe 714 The Effects of Joint Clearance on the Motion Precision of the Machines J.Xiaohong, J.Linhong, J.Dewen, Z.Jichuan 719 Tool Trajectory Error for Table-tilting Machines Y-R Hwang, M-C Ho 724 Automated Calibration for Assembly Device Installation Based on Plug & Produce Concept H.Kikuchi, Y.Maeda, M.Sugi, T.Arai 729 xvii

14 Calibration of 2-DOF Parallel Mechanism O.Sato, M.Hiraki, K.Takamasu, S.Ozono 734 Development of a Calibration Equipment Using Laser Interferometer Combining a Variable Length Vacuum Cell - Structure and Measurement - H.Masuda, Y.Kuriyama, H.Sakai, M.Ueda 739 Development of Calibration Equipment Using Laser Interferometer Combining a Variable Length Vacuum Cell - Control and Application - H.Oozeki, S.Kiyotani, M.Ogihara 744 A Measurement Force Estimation Method of Tapping Stylus K.Takahashi, M.Hayase, T.Hatsuzawa 749 Investigation of the Plastic Deformation and Fracture of Carbon Nanotubes K.J.Ma, C.L.Chao, C.W.Tang, K.H.Chen, L.C.Chen 754 Molecular Dynamics Simulation on Dependence of Atomic-Scale Stick- Slip Phenomenon upon Probe Tip Shape J.Shimizu, H.Eda, L.Zhou 759 Tool Wear Monitoring in Milling Process with Laser Scan Micrometer T.Matsumura, T.Murayama, E.Usui 764 Study on a Modified Concave Filter for Multi-Oscillating Modalities Compensation in Ultra-Precision Machine Tool B.Su, L.Wang, S.Dong 769 New Practical Control of Point-To-Point Positioning Systems : Robustness Evaluation Wahyudi, K.Sato, A.Shimokohbe 774 The Research of an Intelligent Open CNC System J.Zhang, L.Wang, S.Li, F.Zhang 779 Robot Intelligence Augmented by Information Technology S.Sakakibara 784 xviii

15 Standard API for Open-Architecture CNC and it s Application to HMI and Operation Monitoring S.Ueno, M.Mitsuishi, K.Muto, S.Takata Development of Large Ultraprecision Mirror Surface Grinding System with ELID K.Katahira, H.Ohmori, M.Anzai, Y.Yamagata, A.Makinouchi, S.Moriyasu, W.Lin Development of a New Measurement System for Straightness Error by a Heterodyne Interferometer with a Grating S.Asano, T.Goto, H.Tanimura, K.Mitsui Development of Measuring System Equipped with Wire Probe to Measure Fine Contour Shape of Penetrated Specimen H.Obara, M.Tsuji, T. Ohsumi, M.Hatano Development of Ultra Precision Long End Standard Installing Vacuumed Optical Path Laser Interferometer Y.Kuriyama, J.Ishikawa, M.Ueda, Y.Yokoyama Flatness Measurement System Using Fizeau Type Solid Interferometer with High Speed Acquiring Multi-phase Interferograms and Highly Effective Error Decreasing Algorithm K.Kawasaki, Y.Ueshima, N.Mitsutani, H.Haino Proposal of Absolute Length Measuring Machine by Combining Crystalline Lattice Scale and Laser Interferometry P.Rerkkumsup, M.Aketagawa, K.Takada, T.Takagi, T.Watanabe, S.Sadakata Evaluation of Acceleration and Deceleration Profile of Velocity and a New Design Method Using Gaussian Distribution Curve M.Ogihara, Y.Zhang, H.Oozeki, Y.Kuriyama Thermal and Mechanical FEA (Finite Element Analysis) of Wafer Heating for EB Stepper S.Takahashi, Y.Miki, K.Morita, N.Hirayanagi, T.Fujiwara, M.Tateishi, K.Maeno xix

16 Part IV Manufacturing system / CAD / CAM Modeling of Machining Process Planning based on Inverse Form- Shaping Function F.Tanaka, N.Toyama, T.Kishinami Easy Construction of 3D Model from 2D Information Y.Urabe, H.Aoyama Virtual Reality for NC-programming H.K.Tönshoff, N.Rackow Development and Estimation of Case Retrieval Model For Machining Knowledge Support System on Machine Design Y.Fukushima, S.Nagasawa Integrated Process Planning and Production Control -A Flexible Approach Using Co-operative Agent Systems- H.K.Tönshoff, P.-O.Woelk, O.Herzog, I.J.Timm Dynamic Job Shop Scheduling Using a Neural Network: Multistage Training and Selection of Input Information T.Eguchi, F.Oba, S.Toyooka An Organizational Concept for Manufacturing of High Precision Products W.Eversheim, I.Fricker, M.Koschig, N.Michalas Considering Feature Interactions for the Development of a Process Planning System H. Muljadi, K.Ando, M.Ogawa, T.Sakurai Strategic Product Development Decision-making Based on Optimization Incorporating the QFD Method M.Yoshimura, K.Izui Development of a Logistic Operating Curve for an Entire Manufacturing Department -Logistic Process Operating Curve (LPOC) H-P Wiendahl, M.Schneider Fixturing Feature for Determining Optimum Clamping Points: Concept of Fixturing Feature and Its Application to 2-D and 3-D Workpiece Models I.Zaitsu, H.Aoyama, T.Aoyama 887 xx

17 Feature-Based Fixture Planning for Workpieces T.Inoue, I.Inasaki Simulation of Manufacturing System Design for Uncertain Market Conditions H.Fujimoto, A.Ahmed Construction of Master Model from 3D Scanned Data Using Recursive Subdivision Scheme B-Y Ren, I.Hagiwara, Q-X Meng A Study on Knowledge Engineering for Equipment Design and Production S.Takeo, N.Kurochi, S.Tsuchiya, H.Nakamura Life Cycle Support of Mechanical Products Using Network Agent M.Suzuki, K.Sakaguchi, H.Hiraoka Aesthetic Design Based on Kansei Language M.Ota, H.Aoyama A Design Review and Redesign System for NURBS Models with a Haptic Device H.Takahashi Free-form Surface Manufacture for TRR-XY Hybrid Parallel Link Machine Tool T.H.Chang, S.L.Chen, C.A.Kang, K.W.Chen Manufacturing Process Control Based on the Delta Operator T.Aoki Assembly Reliability Evaluation Method (AREM) T.Suzuki, T.Ohashi, M.Asano Maintenance Support System Equipped with Monitoring Function T.Tateno, M.Igoshi Development of Software Platform for Realizing the Dynamic Reconstruction of Software Applications of Manufacturing Systems T.Satake, A.Hayashi, G.Zhang xxi

18 Mechatronic Service and Investigation on the Example of a Forming and Milling Machine J.Hamann, H-P Tröndle Gaussian-Based Free Form Deformation and its Application to Fashion Design N.Yoshida, M.Usui, K.Kitajima A Proposal of Assembly Model Framework Specialized for Unified Parametrics S.Sanami, N.Yoshida, K.Kitajima Precision Machining of Thin-Walled Workpiece by NC Compensating Deflection N.He, K.Wu, Z.Wang, C.Jiang, D.Zuo Index of Contributors 973 xxii

CIRP Encyclopedia of Production Engineering

CIRP Encyclopedia of Production Engineering The International Academy for Production Engineering Luc Laperriere Gunther Reinhart Editors CIRP Encyclopedia of Production Engineering Volume 1 A-H With 1145 Figures and 85 Tables ^ Springer Reference

More information

Lapping and Polishing Basics

Lapping and Polishing Basics Lapping and Polishing Basics Applications Laboratory Report 54 Lapping and Polishing 1.0: Introduction Lapping and polishing is a process by which material is precisely removed from a workpiece (or specimen)

More information

Instrument and Control Systems Laboratory 1 (0-3) Laboratory experiments on topics covered in instrument and control systems.

Instrument and Control Systems Laboratory 1 (0-3) Laboratory experiments on topics covered in instrument and control systems. 01211231 Conventional and Computer-Controlled Machines 3 (3-0) Prerequisite : 01208281 Conventional machine for tools: turning, drilling, tapping, milling, grinding, cutting, punching, boring and bending;

More information

Machining. (Reading: Chap 8 in Kalpakjian and Schmid)

Machining. (Reading: Chap 8 in Kalpakjian and Schmid) Machining (Reading: Chap 8 in Kalpakjian and Schmid) Outline Chip formation during machining Force and power requirement Mechanisms of tool wear and fatigue Types and properties of cutting-tool materials

More information

Machine Tools for High Performance Machining

Machine Tools for High Performance Machining L.N. Lopez de Lacalle A. Lamikiz Editors Machine Tools for High Performance Machining Springer Content Contributors xix 1 Machine Tools for Removal Processes: A General View 1 L. Norberto Lopez de Lacalle

More information

Cutting Tool Geometries

Cutting Tool Geometries Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of the shapes, angles, and other geometric aspects of single-point and

More information

Concurrent Manufacturing Activities Engineering Materials

Concurrent Manufacturing Activities Engineering Materials Mechatronics Technology Dr. Jinming Zhou Outline Overview of manufacturing technology - 1 Overview of manufacturing technology - 2 CNC machine Intelligent machining Home work Division of materials and

More information

TABLE OF CONTENTS CHAPTER TITLE PAGE ACKNOWLEDGEMENTS LIST OF SYMBOLS / ABBREVIATIONS

TABLE OF CONTENTS CHAPTER TITLE PAGE ACKNOWLEDGEMENTS LIST OF SYMBOLS / ABBREVIATIONS vii TABLE OF CONTENTS CHAPTER TITLE PAGE DECLARATION DEDICATION ACKNOWLEDGEMENTS ABSTRACT ABSTRAK TABLE OF CONTENTS LIST OF TABLES LIST OF FIGURES LIST OF SYMBOLS / ABBREVIATIONS LIST OF APPENDICES ii

More information

4. GRINDING MACHINE. 4.1 Introduction. 4.2 Types of grinding machines Rough grinding machines Precision grinding machines

4. GRINDING MACHINE. 4.1 Introduction. 4.2 Types of grinding machines Rough grinding machines Precision grinding machines 4.1 Introduction 4. GRINDING MACHINE Grinding is a metal cutting operation like any other process of machining removing metal in comparatively smaller volume. The cutting tool used is an abrasive wheel

More information

III. Design for lifetime performance and reliability. About the book

III. Design for lifetime performance and reliability. About the book Design for lifetime performance and reliability III About the book The objective of this book is to provide guidelines for engineers helping them to improve machine lifetime performance and reliability.

More information

ACKNOWLEDGMENTS. This work would not have been possible without the advice and support of many

ACKNOWLEDGMENTS. This work would not have been possible without the advice and support of many ACKNOWLEDGMENTS This work would not have been possible without the advice and support of many people. First, and foremost, I would like to thank my advisor Dr. John Patten for providing me the opportunity

More information

High speed machining and conventional die and mould machining

High speed machining and conventional die and mould machining High speed machining and conventional die and mould machining Reprint from HSM - High Speed Machining There are a lot of questions about HSM today and many different, more or less complicated, definitions

More information

MIKRON HPM 1150U HPM 1350U

MIKRON HPM 1150U HPM 1350U MIKRON HPM 1150U HPM 1350U High performance milling versus high speed milling - the one cannot replace the other! While with high speed milling the objective is to create as much surface on the workpiece

More information

INTERTECH 2006. EDM Technology To cut PCD Materials. Presented by. Eric Ostini Product Manager +GF+ Agie Charmilles Group

INTERTECH 2006. EDM Technology To cut PCD Materials. Presented by. Eric Ostini Product Manager +GF+ Agie Charmilles Group INTERTECH 2006 EDM Technology To cut PCD Materials Presented by Eric Ostini Product Manager Agie Charmilles Group +GF+ Outline Goal of the presentation What is PCD PCD applications that commonly used Wire

More information

Comparison of Bearings --- For the Bearing Choosing of High-speed Spindle Design. Xiaofan Xie. Dept. of Mechanical Engineering, University of Utah

Comparison of Bearings --- For the Bearing Choosing of High-speed Spindle Design. Xiaofan Xie. Dept. of Mechanical Engineering, University of Utah Comparison of Bearings --- For the Bearing Choosing of High-speed Spindle Design Xiaofan Xie Dept. of Mechanical Engineering, University of Utah ABSTRACT: Bearing is the most important part of my project

More information

Chop Saws and Grinders

Chop Saws and Grinders Chop Saws and Grinders 1. CHOP SAW 1.0 Function of the Chop Saw Chop saws are used to create a rough, initial abrasive cut in a desired material. In principle, a chop saw is an electrically powered motor

More information

Abrasive Waterjet Cutting Application and Capability

Abrasive Waterjet Cutting Application and Capability Abrasive Waterjet Cutting Application and Capability Introduction Abrasive waterjet cutting is gaining popularity as a means for cutting a wide variety of materials. Ease of programming and the jet s ability

More information

HSS high speed steel drills, diameter mm, included angle 120 degree

HSS high speed steel drills, diameter mm, included angle 120 degree Deep hole drilling Tampere University of Technology Heikki Tikka Hole making and drilling is typical machining operation, which can be done with different machine tools like lathe, drilling machine and

More information

Understanding Manufacturing. Manufacturing Processes. Understanding Manufacturing. Understanding Manufacturing. Understanding Manufacturing

Understanding Manufacturing. Manufacturing Processes. Understanding Manufacturing. Understanding Manufacturing. Understanding Manufacturing Manufacturing Processes Chapter 8 Manufacturing involves making products from raw materials by various processes, machinery, and operations Manufacturing has the important function of adding value Manufacturing

More information

Dynamic Characterization of a Micro-machining Spindle. Byron Knapp and Dave Arneson

Dynamic Characterization of a Micro-machining Spindle. Byron Knapp and Dave Arneson Dynamic Characterization of a Micro-machining Spindle ICOMM 2014 No. Byron Knapp and Dave Arneson Professional Instruments Company, Hopkins, Minnesota, USA Abstract Ultra-precision micro-machining processes

More information

Grinding, lapping, polishing, EDM, laser cut, water jest, etc.

Grinding, lapping, polishing, EDM, laser cut, water jest, etc. Grinding, lapping, polishing, EDM, laser cut, water jest, etc. Grinding is an abrasive machining process that uses a grinding wheel as the cutting tool. Aluminum oxide, silicon carbide, diamond, and cubic

More information

April 26 th, Page 1. A Hitachi Group Company. Copyright 2016 All Rights Reserved

April 26 th, Page 1. A Hitachi Group Company. Copyright 2016 All Rights Reserved April 26 th, 2016 Page 1 About HTMF Key Information: AS 9100 & ISO 9001 Certified Primary NAICS Codes: 332710, 332999, 333511 Cage Code: 79N81 D&B: 969818025 Capability Statement: HI-TECH Machine & Fabrication

More information

Phenomenological aspects of a modified fragmentation of the ground material

Phenomenological aspects of a modified fragmentation of the ground material Phenomenological aspects of a modified fragmentation of the ground material Lucjan Dabrowski, Mieczyslaw Marciniak Warsaw University of Technology, Warsaw, Poland Summary: The main point of this paper

More information

MECHANICAL & INDUSTRIAL CERAMICS

MECHANICAL & INDUSTRIAL CERAMICS MECHANICAL & INDUSTRIAL CERAMICS ASSEMBLY PRODUCTS AUTOMOTIVE PARTS Gas turbine parts The gas turbine, clean in energy consumption and superior in thermal efficiency is being heralded as the leading

More information

Mechanical Manufacturing Process

Mechanical Manufacturing Process Mechanical Manufacturing Process Yao-Joe Yang ( ) National Taiwan University OUTLINE Material Manufacturing processes 1 Materials in Manufacturing Most engineering materials can be classified into one

More information

Abrasive-Flow Machining

Abrasive-Flow Machining 1 Polishing Using Magnetic Fields Figure 25.30 Schematic illustration of polishing of balls and rollers using magnetic fields. (a) Magnetic float polishing of ceramic balls. (b) Magnetic-field-assisted

More information

Micromachining with UV Laser Markers

Micromachining with UV Laser Markers White Paper Micromachining with UV Laser Markers David Gillen, Blueacre Technology David Gillen, Blueacre Technology Laser Marking technology has come a long way from simply identifying parts with logos

More information

Grade Selection... Coated Grades / CVD... Coated Grades / PVD... Cermet... PCBN (T-CBN)... PCD (T-DIA)... Ceramics...

Grade Selection... Coated Grades / CVD... Coated Grades / PVD... Cermet... PCBN (T-CBN)... PCD (T-DIA)... Ceramics... Products Grade Selection... Coated / CVD... Coated / PVD... Cermet... PCBN (T-CBN)... PCD (T-DIA)... Ceramics... Uncoated Cemented Carbides... Ultra fine Grain Cemented Carbides... -2-4 -6-8 -0-2 - -4-5

More information

RAPID PROTOTYPING. Principles and Applications. RAFIQ NOORANI, Ph.D. Professor of Mechanical Engineering Loyola Marymount University Los Angeles, CA

RAPID PROTOTYPING. Principles and Applications. RAFIQ NOORANI, Ph.D. Professor of Mechanical Engineering Loyola Marymount University Los Angeles, CA RAPID PROTOTYPING Principles and Applications RAFIQ NOORANI, Ph.D. Professor of Mechanical Engineering Loyola Marymount University Los Angeles, CA WILEY JOHN WILEY & SONS, INC. CONTENTS Preface Acknowledgments

More information

5. DIMENSIONS, TOLERANCES AND SURFACE. 5.1 Dimension, Tolerances and Related Attributes 5.2 Surfaces 5.3 Effect of Manufacturing Processes

5. DIMENSIONS, TOLERANCES AND SURFACE. 5.1 Dimension, Tolerances and Related Attributes 5.2 Surfaces 5.3 Effect of Manufacturing Processes 5. DIMENSIONS, TOLERANCES AND SURFACE 5.1 Dimension, Tolerances and Related Attributes 5.2 Surfaces 5.3 Effect of Manufacturing Processes Introduction Dimensions the sizes and geometric features of a component

More information

TechCut 4 Precision Low Speed Saw

TechCut 4 Precision Low Speed Saw Product Brochure TechCut 4 Precision Low Speed Saw 3" - 6" Blade Range Digital Speed Display 1-Micron Sample Indexing Spring-Loaded Dressing Stick Attachment All Aluminum & Stainless Steel Construction

More information

NetShape - MIM. Metal Injection Molding Design Guide. NetShape Technologies - MIM Phone: 440-248-5456 31005 Solon Road FAX: 440-248-5807

NetShape - MIM. Metal Injection Molding Design Guide. NetShape Technologies - MIM Phone: 440-248-5456 31005 Solon Road FAX: 440-248-5807 Metal Injection Molding Design Guide NetShape Technologies - MIM Phone: 440-248-5456 31005 Solon Road FAX: 440-248-5807 Solon, OH 44139 solutions@netshapetech.com 1 Frequently Asked Questions Page What

More information

Preface Light Microscopy X-ray Diffraction Methods

Preface Light Microscopy X-ray Diffraction Methods Preface xi 1 Light Microscopy 1 1.1 Optical Principles 1 1.1.1 Image Formation 1 1.1.2 Resolution 3 1.1.3 Depth of Field 5 1.1.4 Aberrations 6 1.2 Instrumentation 8 1.2.1 Illumination System 9 1.2.2 Objective

More information

Lecture10. Non-traditional processes

Lecture10. Non-traditional processes 1 Lecture10. Non-traditional processes This chapter describes a few of manufacturing processes that were developed relatively recently namely in the last 50 years or so. Therefore these are sometimes called

More information

Ceramic processing. The higher performance of ceramics is the result of strict control ol of purity, composition, microstructure and processing.

Ceramic processing. The higher performance of ceramics is the result of strict control ol of purity, composition, microstructure and processing. Ceramic processing The higher performance of ceramics is the result of strict control ol of purity, composition, microstructure and processing. Because of their inherent brittleness, ceramics cannot be

More information

Manufacturing Processes for Engineering Materials

Manufacturing Processes for Engineering Materials Manufacturing Processes for Engineering Materials FIFTH EDITION In SI Units Serope Kalpakjian Illinois Institute of Technology, Chicago, Illinois Steven R. Schmid University of Notre Dame, Notre Dame,

More information

* This work is an official contribution of the National Institute of Standards and Technology and

* This work is an official contribution of the National Institute of Standards and Technology and Variability in the Geometric Accuracy of Additively Manufactured Test Parts A.L. Cooke and J.A. Soons National Institute of Standards and Technology * Gaithersburg, MD, USA Abstract This paper describes

More information

Milling & Machining Centers

Milling & Machining Centers Training Objective After watching the program and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will

More information

MOLDS FOR CASTING VEHICLE PARTS

MOLDS FOR CASTING VEHICLE PARTS MOLDS FOR CASTING VEHICLE PARTS N. Zaimović-Uzunović, University of Sarajevo, Faculty of Mechanical Engineering in Zenica I. Karabegović, University of Bihać, Technical Faculty in Bihać D. Ćurić, Foundry

More information

3D laser removal and texturing in a new dimension

3D laser removal and texturing in a new dimension www.dmgmori.com LASERTEC 45 Shape 3D material removal by laser Laser texturing LASERTEC 45 Shape 3D laser removal and texturing in a new dimension LASERTEC LASERTEC 45 Shape: High-precision 3D laser removal

More information

:: fast. precise. clean GRAPHITE MACHINING USING HIGH TECHNOLOGY CNC MILLING.

:: fast. precise. clean GRAPHITE MACHINING USING HIGH TECHNOLOGY CNC MILLING. :: fast. precise. clean GRAPHITE MACHINING USING HIGH TECHNOLOGY CNC MILLING. made in Germany Welcome to the world of imes-icore. Productivity and economy redefined! Customers continually de- THE FREE

More information

UNIT 1 INTRODUCTION TO NC MACHINE TOOLS

UNIT 1 INTRODUCTION TO NC MACHINE TOOLS UNIT 1 INTRODUCTION TO NC MACHINE TOOLS Structure 1.1 Introduction Objectives 1.2 NC Machines 1.2.1 Types of NC Machine 1.2.2 Controlled Axes 1.2.3 Basic Components of NC Machines 1.2.4 Problems with Conventional

More information

INTRODUCTION UNDERSTANDING THE PRODUCT ABRASIVE TYPES

INTRODUCTION UNDERSTANDING THE PRODUCT ABRASIVE TYPES INTRODUCTION From standard aluminum oxide bench wheels to premium ceramic abrasive surface grinding wheels, Norton offers high performance abrasive solutions that can maximise productivity in virtually

More information

CUTTING TOOL TECHNOLOGY. 1. Tool life 2. Tool Materials 3. Tool Geometry 4. Cutting fluids

CUTTING TOOL TECHNOLOGY. 1. Tool life 2. Tool Materials 3. Tool Geometry 4. Cutting fluids CUTTING TOOL TECHNOLOGY 1. Tool life 2. Tool Materials 3. Tool Geometry 4. Cutting fluids 1 Introduction Machining is accomplished by cutting tools. Cutting tools undergo high force and temperature and

More information

: PRECISION GRINDING PRACTICE (Surface grinding, Cylindrical grinding and Centreless grinding)

: PRECISION GRINDING PRACTICE (Surface grinding, Cylindrical grinding and Centreless grinding) : PRECISION GRINDING PRACTICE (Surface grinding, Cylindrical grinding and Centreless grinding) COURSE S.NO. : 9.01 COURSE CONTENT Principles of grinding process, grinding accuracies and finish and grinding

More information

Consumables Accessories

Consumables Accessories Consumables Accessories Index Lapping / Polishing Lapping plates / Polishing plates / Supporting plates.... 3 Dressing rings... 4 Pressure plates 4 Ceramic pellets. 4 Rubber pads..... 5 Felt pads.... 5

More information

Adaptive Machining for High Precision Fabrication

Adaptive Machining for High Precision Fabrication Adaptive Machining for High Precision Fabrication Radu Pavel, Ph.D. Chief Technology Officer Slide 1 of 35 Outline 1. About OPTIS 2. How does Adaptive Machining work? 3. The Benefits of Adaptive Machining

More information

Cutting Tool Materials

Cutting Tool Materials Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of cutting tool metallurgy and specific tool applications for various

More information

Mechanical properties can be permanently altered by either thermal or mechanical treatment. Those properties include:

Mechanical properties can be permanently altered by either thermal or mechanical treatment. Those properties include: Training Objective After watching the program and reviewing this printed material, the viewer will become familiar with further aspects of tool design by exploring the materials used in toolmaking. Tool

More information

Lecture 22: Integrated circuit fabrication

Lecture 22: Integrated circuit fabrication Lecture 22: Integrated circuit fabrication Contents 1 Introduction 1 2 Layering 4 3 Patterning 7 4 Doping 8 4.1 Thermal diffusion......................... 10 4.2 Ion implantation.........................

More information

8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles

8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles 8.1 HPC for improved efficiency on standard machine tools by using new fluid-driven spindles A. Schubert 1, O. Harpaz 2, B. Books 2, U. Eckert 1, R. Wertheim 1 1 Fraunhofer IWU, Reichenhainer Str. 88,

More information

Module 5 Abrasive Processes (Grinding) Version 2 ME, IIT Kharagpur

Module 5 Abrasive Processes (Grinding) Version 2 ME, IIT Kharagpur Module 5 brasive Processes (Grinding) Lesson 29 lassification of grinding machines and their uses Instructional Objectives t the end of this lesson the students would be able to: (i) (ii) (iii) recognise

More information

GF Machining Solutions. System 3R. Transformer

GF Machining Solutions. System 3R. Transformer GF Machining Solutions System 3R Transformer Swedish design and quality 2 System 3R Transformer Contents Scalable Automation Customer-specific Solutions Standardized modules WSM WorkShopManager Customer

More information

Understanding the Wire EDM Process

Understanding the Wire EDM Process 5 Understanding the Wire EDM Process 69 Accuracy and Tolerances Wire EDM is extremely accurate. Many machines move in increments of 40 millionths of an inch (.00004") (.001 mm), some in 10 millionths of

More information

Miniaturizing Flexible Circuits for use in Medical Electronics. Nate Kreutter 3M

Miniaturizing Flexible Circuits for use in Medical Electronics. Nate Kreutter 3M Miniaturizing Flexible Circuits for use in Medical Electronics Nate Kreutter 3M Drivers for Medical Miniaturization Market Drivers for Increased use of Medical Electronics Aging Population Early Detection

More information

Alternative Linear Motion Systems. Iron Core Linear Motors

Alternative Linear Motion Systems. Iron Core Linear Motors Alternative Linear Motion Systems ME EN 7960 Precision Machine Design Topic 5 ME EN 7960 Precision Machine Design Alternative Linear Motion Systems 5-1 Iron Core Linear Motors Provide actuation forces

More information

Electrical Discharge Machining

Electrical Discharge Machining Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of electrical discharge machining, or EDM, principles and capabilities.

More information

Welcome at the Kugler Group

Welcome at the Kugler Group Welcome at the Kugler Group Mission statement Kugler is among the leading companies in the development and manufacture of ultra-precision machines and related optical and mechanical precision parts. 1

More information

Because of the many types of drilling tools and methods, the tool choice is determined by a number of factors, including:

Because of the many types of drilling tools and methods, the tool choice is determined by a number of factors, including: Training Objective After watching the program and reviewing this printed material, the viewer will gain knowledge and understanding of the basics of the drills and machines used in a variety of holemaking

More information

Milling and Machining Center Basics

Milling and Machining Center Basics Training Objectives After watching the video and reviewing this printed material, the viewer will gain knowledge and understanding of basic milling theories and procedures. In addition, the viewer will

More information

DIESEL EFFECT PROBLEM SOLVING DURING INJECTION MOULDING

DIESEL EFFECT PROBLEM SOLVING DURING INJECTION MOULDING RESEARCH PAPERS FACULTY OF MATERIALS SCIENCE AND TECHNOLOGY IN TRNAVA SLOVAK UNIVERSITY OF TECHNOLOGY IN BRATISLAVA 2014 Volume 22, Special Number DIESEL EFFECT PROBLEM SOLVING DURING INJECTION MOULDING

More information

New trends of laser processing within the process chain of hotforming

New trends of laser processing within the process chain of hotforming 11.04.2013 Hannover Messe New trends of laser processing within the process chain of hotforming TRUMPF Laser- und Systemtechnik GmbH Johannes Bührle Industry Management Automotive Introduction We are a

More information

Introduction to CNCMachining. Krishanu Biswas Department of Materials and Metallurgical Engineering IIT Kanpur

Introduction to CNCMachining. Krishanu Biswas Department of Materials and Metallurgical Engineering IIT Kanpur Introduction to CNCMachining Krishanu Biswas Department of Materials and Metallurgical Engineering IIT Kanpur CNC Machines What is a CNC Machine? CNC : Computer and Numeric Control Conventionally, an operator

More information

Presentation on CNC MACHINES. By: Hafiz Muhammad Rizwan

Presentation on CNC MACHINES. By: Hafiz Muhammad Rizwan Presentation on CNC MACHINES By: Hafiz Muhammad Rizwan WELCOME CNC Machines What is a CNC Machine? CNC : Computer Numerical Control Conventionally, an operator decides and adjusts various machines parameters

More information

RAPID PROTOTYPING. Learning Objectives: By the end of the lecture the student should be able to: Explain the fundamentals of Rapid Prototyping

RAPID PROTOTYPING. Learning Objectives: By the end of the lecture the student should be able to: Explain the fundamentals of Rapid Prototyping RAPID PROTOTYPING Learning Objectives: By the end of the lecture the student should be able to: Explain the fundamentals of Rapid Prototyping Outline and explain differences of Rapid Prototyping Technologies

More information

Position Sensors MicroSense, LLC

Position Sensors MicroSense, LLC Understanding Capacitive Position Sensors 2011 MicroSense, LLC Table of Contents 1. Introduction to Capacitive Sensors... 3 1.1 Characteristics of Capacitive Sensors... 3 1.1.1 Non Contact... 3 1.1.2 High

More information

Conductivity of silicon can be changed several orders of magnitude by introducing impurity atoms in silicon crystal lattice.

Conductivity of silicon can be changed several orders of magnitude by introducing impurity atoms in silicon crystal lattice. CMOS Processing Technology Silicon: a semiconductor with resistance between that of conductor and an insulator. Conductivity of silicon can be changed several orders of magnitude by introducing impurity

More information

ELECTRICAL DISCHARGE MACHINING

ELECTRICAL DISCHARGE MACHINING ELECTRICAL DISCHARGE MACHINING MATERIALS SCIENCE AND TECHNOLOGY II PRESENTATION ASENA DENİZ DEMİRCAN UFUK OKUMUŞ SEMA AŞIK WHAT IS EDM? Electrical Discharge Machining Used on hard metals works with electrically

More information

1. Photon Beam Damage and Charging at Solid Surfaces John H. Thomas III

1. Photon Beam Damage and Charging at Solid Surfaces John H. Thomas III 1. Photon Beam Damage and Charging at Solid Surfaces John H. Thomas III 1. Introduction............................. 2. Electrostatic Charging of Samples in Photoemission Experiments............................

More information

Stationary Diamond Dressers, PCD/PCBN Tools & Wear Parts

Stationary Diamond Dressers, PCD/PCBN Tools & Wear Parts www.wendtindia.com Precision Stationary Diamond Dressers, PCD/PCBN Tools & Wear Parts Wendt provides the comprehensive range of dressing solutions for truing and dressing applications. It manufactures

More information

CNC Portal Milling Machine FZ 32. High Performance Milling Technology

CNC Portal Milling Machine FZ 32. High Performance Milling Technology CNC Portal Milling Machine FZ 32 High Performance Milling Technology FZ 32 HSC Portal Milling Machine with Overhead Gantry with upper moving portal high axial accelerations and perfect surface finishes

More information

KNOCK OUT NAK80 INTRODUCING PLASTIC MOLDS RUBBER MOLDS JIGS & FIXTURES PRESS DIES. 40 HRC Pre-Hardened High Performance High Precision Mold Steel

KNOCK OUT NAK80 INTRODUCING PLASTIC MOLDS RUBBER MOLDS JIGS & FIXTURES PRESS DIES. 40 HRC Pre-Hardened High Performance High Precision Mold Steel INTRODUCING NAK80 40 HRC Pre-Hardened High Performance High Precision Mold Steel KNOCK OUT THE COMPETITION PLASTIC MOLDS RUBBER MOLDS JIGS & FIXTURES PRESS DIES Features: Machines up to 20 percent faster

More information

Overview 內 容 快 速 原 型 科 技 中 心 服 務 激 光 抄 數 原 理 快 速 原 型 技 術 鈦 金 屬 鑄 造 於 其 產 品 開 發 之 應 用 激 光 焊 接 技 術 快 速 原 型 一 站 式 個 案 研 究 參 觀 快 速 原 型 科 技 中 心

Overview 內 容 快 速 原 型 科 技 中 心 服 務 激 光 抄 數 原 理 快 速 原 型 技 術 鈦 金 屬 鑄 造 於 其 產 品 開 發 之 應 用 激 光 焊 接 技 術 快 速 原 型 一 站 式 個 案 研 究 參 觀 快 速 原 型 科 技 中 心 Overview 內 容 快 速 原 型 科 技 中 心 服 務 激 光 抄 數 原 理 快 速 原 型 技 術 鈦 金 屬 鑄 造 於 其 產 品 開 發 之 應 用 激 光 焊 接 技 術 快 速 原 型 一 站 式 個 案 研 究 參 觀 快 速 原 型 科 技 中 心 Technology Integrated Product Development Cycle Product Design

More information

FINISHING OF SUS 304 STAINLESS STEEL BENT TUBES USING MAGNETIC ABRASIVE FINISHING

FINISHING OF SUS 304 STAINLESS STEEL BENT TUBES USING MAGNETIC ABRASIVE FINISHING FINISHING OF SUS 304 STAINLESS STEEL BENT TUBES USING MAGNETIC ABRASIVE FINISHING Parmvir Singh Kang 1, Dr. Lakhvir Singh 2, Jagdeep Singh Gill 3 1 Department of Mechanical Engineering, Chandigarh Engineering

More information

Coating Technology: Evaporation Vs Sputtering

Coating Technology: Evaporation Vs Sputtering Satisloh Italy S.r.l. Coating Technology: Evaporation Vs Sputtering Gianni Monaco, PhD R&D project manager, Satisloh Italy 04.04.2016 V1 The aim of this document is to provide basic technical information

More information

Module - 3 Advanced Machining Processes Lecture - 13 Equipment and Process Parameters in LBM

Module - 3 Advanced Machining Processes Lecture - 13 Equipment and Process Parameters in LBM Advanced Manufacturing Processes Prof. Dr. Apurbba Kumar Sharma Department of Mechanical and Industrial Engineering Indian Institute of Technology, Roorkee Module - 3 Advanced Machining Processes Lecture

More information

CNC MILLING TECHNOLOGY FOR THE JEWELER- AND GOLDSMITH HANDCRAFT:

CNC MILLING TECHNOLOGY FOR THE JEWELER- AND GOLDSMITH HANDCRAFT: :: precise. individual. economic. CNC MILLING TECHNOLOGY FOR THE JEWELER- AND GOLDSMITH HANDCRAFT: made in Germany Welcome to the world of imes-icore. Productivity and economy redefined! imes-icore is

More information

Allison Rae Paramount Industries Rhode Island School of Design ID 87. Prototyping Overview

Allison Rae Paramount Industries Rhode Island School of Design ID 87. Prototyping Overview Allison Rae Paramount Industries Rhode Island School of Design ID 87 Prototyping Overview Prototyping for Mechanical Parts Paramount Industries Started as prototyping vendor, then added: Industrial Design

More information

Plug-n-play. electrical contact system eases medical device design INSIDE: September Page 21

Plug-n-play. electrical contact system eases medical device design INSIDE: September Page 21 September 2010 www.designworldonline.com INSIDE: >> SOLAR POWER: Advanced Motion Control Adds Efficiency to Solar Manufacturing Processes PAGE 42 >> MOTION CONTROL: Encoders for the Nanotech World PAGE

More information

FRAUNHOFER INSTITUTE FOR MACHINE TOOLS AND FORMING TECHNOLOGY IWU HYBRID MACHINING PROCESSES IN CUTTING TECHNOLOGY

FRAUNHOFER INSTITUTE FOR MACHINE TOOLS AND FORMING TECHNOLOGY IWU HYBRID MACHINING PROCESSES IN CUTTING TECHNOLOGY FRAUNHOFER INSTITUTE FOR MACHINE TOOLS AND FORMING TECHNOLOGY IWU HYBRID MACHINING PROCESSES IN CUTTING TECHNOLOGY VIBRATION-SUPERIMPOSED MACHINING Hybrid Machining Processes Principle Process Variants

More information

Flex Circuit Design and Manufacture.

Flex Circuit Design and Manufacture. Flex Circuit Design and Manufacture. Hawarden Industrial Park, Manor Lane, Deeside, Flintshire, CH5 3QZ Tel 01244 520510 Fax 01244 520721 Sales@merlincircuit.co.uk www.merlincircuit.co.uk Flex Circuit

More information

System Expertise for Machine Tools

System Expertise for Machine Tools System Expertise for Machine Tools LTi gives you a competitive edge Increased productivity and the ability to gain a vital competitive edge are among the key benefits of LTi drive and control solutions

More information

Rapid prototyping. CAD / lecture. October 5, 2010. TO&I Vermelding onderdeel organisatie

Rapid prototyping. CAD / lecture. October 5, 2010. TO&I Vermelding onderdeel organisatie 1 Rapid prototyping is: Rapid prototyping is an additive (layered) digital fabrication technology Layers of material are added forming the final 3d physical model The digital data of the virtual 3d model

More information

Rapid Prototyping. Training Objective

Rapid Prototyping. Training Objective Training Objective After watching the program and reviewing this printed material, the viewer will understand the principles and practical applications of Rapid Prototyping. Basic concepts are explained

More information

TruLaser Tube: Optimal tube. and. profile cutting. Machine Tools / Power Tools Laser Technology / Electronics Medical Technology

TruLaser Tube: Optimal tube. and. profile cutting. Machine Tools / Power Tools Laser Technology / Electronics Medical Technology TruLaser Tube: Optimal tube and profile cutting Machine Tools / Power Tools Laser Technology / Electronics Medical Technology Giving you the edge in laser tube processing. The TRUMPF Group ranks among

More information

Metallurgy Lab. Materials Science-MECH 2121 UNIVERSITY OF MAURITIUS FACULTY OF ENGINEERING MECHANICAL AND PRODUCTION ENGINEERING DEPARTMENT

Metallurgy Lab. Materials Science-MECH 2121 UNIVERSITY OF MAURITIUS FACULTY OF ENGINEERING MECHANICAL AND PRODUCTION ENGINEERING DEPARTMENT UNIVERSITY OF MAURITIUS FACULTY OF ENGINEERING MECHANICAL AND PRODUCTION ENGINEERING DEPARTMENT METALLURGY LAB. MATERIALS SCIENCE MODULE- MECH 2121 Prepared by S. Venkannah METALLOGRAPHY: Metallography

More information

Module 3 Machinability. Version 2 ME, IIT Kharagpur

Module 3 Machinability. Version 2 ME, IIT Kharagpur Module 3 Machinability Lesson 1 Cutting Tool Materials of common use Instructional Objectives At the end of this lesson, the students will be able to (i) Identify the needs and cite the chronological development

More information

Your Single Source For Custom Parts.

Your Single Source For Custom Parts. Stereolithography (SLA) Stereolithography prototypes are constructed from a liquid photopolymer that is selectively cured using an ultraviolet laser. 50 Well Specimen Tray Focus group and presentation

More information

Le nanotecnologie: dal Laboratorio al Mercato. Fabrizio Pirri Politecnico di Torino Istituto Italiano di Tecnologia

Le nanotecnologie: dal Laboratorio al Mercato. Fabrizio Pirri Politecnico di Torino Istituto Italiano di Tecnologia Le nanotecnologie: dal Laboratorio al Mercato Fabrizio Pirri Politecnico di Torino Istituto Italiano di Tecnologia Materials & Processes for micro nanotechnologies Laboratory http://www.polito.it/micronanotech

More information

Dr Marcin Adamiak marcin.adamiak. www.imiib.polsl.pl/

Dr Marcin Adamiak marcin.adamiak. www.imiib.polsl.pl/ FP7 NMP/INCO Brokerage Event Warsaw, 17-18 September 2009 Dr Marcin Adamiak marcin.adamiak adamiak@polsl.pl http://www.imiib.polsl.pl www.imiib.polsl.pl/ Institute of Engineering Materials and Biomaterials

More information

Leading-edge technology for machine tools

Leading-edge technology for machine tools Leading-edge technology for machine tools We combine five specialists in one Improving productivity and successfully distinguishing themselves from the competition are key objectives for machine tool

More information

CNC HARDWARE & TOOLING BASICS

CNC HARDWARE & TOOLING BASICS Computer Aided Manufacturing (CAM) CNC HARDWARE & TOOLING BASICS Assoc. Prof. Dr. Tamer S. Mahmoud 1. Parts of CNC Machine Tools Any CNC machine tool essentially consists of the following parts: Part Program,

More information

Three Key Elements of a Cutting Tool

Three Key Elements of a Cutting Tool End Mill Training Three Key Elements of a Cutting Tool Geometry Cutting Tool 3 Elements Needed in a Good Cutting Tool Well Balanced For Best Performance Only Good as the Weakest Link End Mill Terms A -

More information

Renishaw 2008. apply innovation TM. Calibrating 5-axis machines to improve part accuracy. 5Align

Renishaw 2008. apply innovation TM. Calibrating 5-axis machines to improve part accuracy. 5Align Calibrating 5-axis machines to improve part accuracy 5Align Productive Process Pyramid TM Understanding and tracking machine behaviour Process verification Thermal compensation In-cycle process control

More information

Automotive Applications of 3D Laser Scanning Introduction

Automotive Applications of 3D Laser Scanning Introduction Automotive Applications of 3D Laser Scanning Kyle Johnston, Ph.D., Metron Systems, Inc. 34935 SE Douglas Street, Suite 110, Snoqualmie, WA 98065 425-396-5577, www.metronsys.com 2002 Metron Systems, Inc

More information

The creation of tooling using the selective laser sintering process. Scott Schermer S.C. Johnson

The creation of tooling using the selective laser sintering process. Scott Schermer S.C. Johnson The creation of tooling using the selective laser sintering process Scott Schermer S.C. Johnson 1 TOOLING utilizing traditional rapid prototyping machines to produce metal inserts. 2 LaserForm ST-100?

More information

Excimer Laser Technology

Excimer Laser Technology D. Basting G. Marowsky (Eds.) Excimer Laser Technology With 257 Figures ^y Springer Contents 1 Introduction 1 1.1 Introductory Remarks 1 1.1.1 The Unique Microstructuring Capabilities of Excimer Lasers

More information

Encoders for Linear Motors in the Electronics Industry

Encoders for Linear Motors in the Electronics Industry Technical Information Encoders for Linear Motors in the Electronics Industry The semiconductor industry and automation technology increasingly require more precise and faster machines in order to satisfy

More information

Turning Grades. The best way to choose KORLOY turning inserts. Selection system. Application range of turning grades. Workpiece ISO.

Turning Grades. The best way to choose KORLOY turning inserts. Selection system. Application range of turning grades. Workpiece ISO. Auto Tools Cartridge External Holder Turning Inserts Turning C/B Turning Grades Turning The best way to choose ORLOY turning inserts Coated carbide Cermet Uncoated carbide N S H 01 10 20 30 40 50 10 20

More information

NX CAD/CAM 3-Axis Milling Foundation

NX CAD/CAM 3-Axis Milling Foundation CAD/CAM 3-Axis Milling Foundation NX CAM benefits Automated hole making capability speeds common processes Boundary-based cutting provides flexibility to cut on minimal geometry Solids-based cutting cuts

More information