CE MARK TECHNICAL FILE

Transcription

1 CE MARK TECHNICAL FILE of WLAN ABG MINIPCI Model DCMA-81;CM10;VZA-82 Contains: 1. Declaration of Conformity 2. ETSI EN or/& ETSI EN test report 3. ETSI EN and ETSI EN EN /AS/NZS test report 5. EN /AS/NZS test report 6. Certificate of EN Block Diagram and Schematics 8. Users manual

2 Page 1 of 2 Report No. ISL-06LR003E328, 06LR003E489 Declaration of Conformity Name of Responsible Party: Wistron Neweb Corporation Address of Responsible Party: No. 10-1, Li-hsin Road 1, Science-based Industrial Park,Hsinchu 300, Taiwan, R. O. C. Declares that product: Model: Assembled by: Address: WLAN ABG MINIPCI DCMA-81;CM10;VZA-82 Same as above Same as above Conformed to the R&TTE Directive 99/5/EC as attested by conformity with the following harmonized standards: ETSI EN V1.6.1: ERM; wideband transmission systems; data transmission equipment operating in the 2.4Ghz ISM band and using spread spectrum modulation techniques. ETSI EN V1.2.3: BRAN; 5Ghz high performance RLAN. ETSI EN V1.4.1 and ETSI EN V1.2.1: ERM; EMC standard for radio equipment and service; specific conditions for wideband data and HIPERLAN equipment. Standard Description Results Criteria EN : 1995/A1: 1998/A2: 2001 AS/NZS : 2002 EN : 2002/A1: 2002 AS/NZS : 1999 EN : 1995/A1: 2001/A2: 2001 AS/NZS : 1999 EN : 1995/A1: 2001 AS/NZS : 1999 EN : 1996/A1: 2001 AS/NZS : 1999 Electrostatic Discharge Pass B Radio-Frequency, Electromagnetic Field Pass Electrical Fast Transient/Burst Pass B Surge Pass B Conductive Disturbance Pass A A <to be continued>

3 EN : 1994/A1: 2001 AS/NZS : 1999 Page 2 of 2 Report No. ISL-06LR003E328, 06LR003E489 Standard Description Results Criteria Voltage Dips / Short Interruption and Voltage Variation 30% in 10ms Pass B 60% in 100ms Pass C >95% in 5000ms Pass C EN55022:1998/A1:2000; AS/NZS CISPR 22: 2002: Limits and methods of measurement of Radio Interference characteristics of Information Technology Equipment. EN55022:1998/A1:2000; AS/NZS CISPR 22: 2002 EN55022:1998/A1:2000; AS/NZS CISPR 22: 2002 EN : 2000 AS/NZS : 2003 EN : 1995/A1: 2001 AS/NZS : 1998 Standard Description Results Criteria Conductive Test Pass B Radiated Test NA Not Applicable Standard Description Results Limits for harmonics current emissions Limits for voltage fluctuations and flicker in low-voltage supply systems. Conforms to the Low Voltage Directive 73/23/EEC as attested by conformity with the following harmonized standard: EN : st ED.: Safety of Information Technology Equipment Including electrical business equipment We, Wistron Neweb Corporation, hereby declare that the equipment bearing the trade name and model number specified above was tested conforming to the applicable Rules under the most accurate measurement standards possible, and that all the necessary steps have been taken and are in force to assure that production units of the same equipment will continue to comply with the requirements. Pass Pass Edward Yeh Wistron Neweb Corporation Date: 2006/03/03

4 No. 65, Ku Dai Keng St., Hsichih, Taipei 221, R.O. C. Tel: FAX: No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325, Taiwan, R.O.C. Tel: FAX: Certificate Test Report No.: 06LR003E328 ; 06LR003E489 Date: 2006/03/03 Product Name: WLAN ABG MINIPCI Model Number(s): DCMA-81;CM10;VZA-82 Responsible Party Wistron Neweb Corporation Address: No. 10-1, Li-hsin Road 1, Science-based Industrial Park,Hsinchu 300,, Taiwan, R. O. C. Contact Person: Edward Yeh We,, hereby certify that: The device bearing the trade name and model specified above has been shown to comply with the applicable technical standards as indicated in the measurement report and was tested in accordance with the measurement procedures specified in R&TTE Directive 99/5/EC. The device was passed the test performed according to : ETSI EN V1.6.1: ERM; wideband transmission systems; data transmission equipment operating in the 2.4Ghz ISM band and using spread spectrum modulation techniques. ETSI EN V1.2.3: BRAN; 5Ghz high performance RLAN. ETSI EN V1.4.1 and ETSI EN V1.2.1: ERM; EMC standard for radio equipment and service; specific conditions for wideband data and HIPERLAN equipment. EN : 1995/A1: 1998/A2: 2001 EN : 1996/A1: 2001 AS/NZS : 2002 AS/NZS : 1999 EN : 1995/A1: EN : 2002/A1: /A2: 2001 AS/NZS : 1999 AS/NZS : 1999 EN : 1995/A1: 2001 AS/NZS : 1999 EN : 1994/A1: 2001 AS/NZS : 1999 EN55022:1998/A1:2000; AS/NZS CISPR 22: 2002: Limits and methods of measurement of Radio Interference characteristics of Information Technology Equipment -- Conductive Test EN : 2000/AS/NZS : 2003: Limits for harmonics current emissions. EN : 1995/A1: 2001/ AS/NZS : 1998: Limits for voltage fluctuations and flicker in low-voltage supply systems. I attest to the accuracy of data and all measurements reported herein were performed by me or were made under my supervision and are correct to the best of my knowledge and belief. I assume full responsibility for the completeness of these measurements and vouch for the qualifications of all persons taking them Eddy Hsiung/Director

5 ETSI EN & ETSI EN EN / HARMONICS EN / VOLTAGE FLUCTUATIONS TEST REPORT of Product Name WLAN ABG MINIPCI Model DCMA-81;CM10;VZA-82 (Brand: Wistron Neweb) Applied by: Wistron Neweb Corporation No. 10-1, Li-hsin Road 1, Science-based Industrial Park,Hsinchu 300, Taiwan, R. O. C. Test Performed by: (NVLAP Lab. Code: ) (V) Lung-Tan LAB NEMKO:ELA 113B No. 120, Lane 180, San Ho Tsuen, Hsin Ho Rd. Lung-Tan Hsiang, Tao Yuan County 325 Taiwan, R.O.C Tel:(03) Fax:(03) Issue Date: 2006/03/03 T10-R9-7

6 -i- Contents of Report 1. General Certification of Accuracy of Test Data Summary Operation Environment Test Standards Description of Support Equipment Software for Controlling Support Unit...7 I/O Cable Condition of EUT and Support Units Description of Equipment Under Test Emission Test Power Main Port Conducted Emissions Configuration and Procedure EUT Configuration Test Procedure EMI Receiver/Spectrum Analyzer Configuration (for the frequencies tested) General Power Main Port Conducted Test Configuration Test Data: Harmonics test Voltage Fluctuations test Immunity Test Electrostatic discharge (ESD) immunity test Radio-Frequency, Electromagnetic Field immunity test Electrical Fast transient/burst immunity test Surge immunity test Immunity to Conductive Disturbance Power Frequency Magnetic field immunity test Voltage Dips, Short Interruption and Voltage Variation immunity test Test Equipment List Software for Controlling Spectrum/Receiver and Calculating Test Data Photographs Photo of ESD measurement Photo of RF Field Strength Susceptibility Measurement Photo of Electrical Fast Transient/Burst measurement Photo of Surge measurement Photo of Conductive Measurement Photo of Magnetic field measurement Photo of Voltage Dips measurement Photo of Harmonics and Voltage Fluctuations Appendix: Photographs of EUT Please refer to the File of ISL-06LR003P...34

7 -1-1. General 1.1 Certification of Accuracy of Test Data Standards: Please refer to 2.2 Equipment Tested: WLAN ABG MINIPCI Model: DCMA-81;CM10;VZA-82 Applied by Wistron Neweb Corporation Sample received Date: 2006/01/20 Final test Date : 2006/03/01 Test Site: LT Test Site Test Result PASS Report Engineer: Daphne Liu Test Engineer: Jerry Chiou Approve & Signature Eddy Hsiung/Director Test results given in this report apply only to the specific sample(s) tested under stated test conditions. This report shall not be reproduced other than in full without the explicit written consent of ISL. This report totally contains 36 pages, including 1 cover page, 1 contents page, and 34 pages for the test description. This report must not be use to claim product endorsement by NVLA, NIST, any agency of the federal government. This test report accurately contains the test results of the above standards at the time of the test. The results in this report apply only to the sample(s) tested. This test report shall not be reproduced except in full, without the written approval of International Standards Laboratory.

8 -2-2. Summary 2.1 Operation Environment Power supply: AC 230 V / 50 Hz 2.2 Test Standards The immunity tests which this report describes were conducted by an independent electromagnetic compatibility consultant, in accordance with the ETSI EN V1.2.3: BRAN; 5Ghz high performance RLAN. ETSI EN V1.4.1 and ETSI EN V1.2.1: ERM; EMC standard for radio equipment and service; specific conditions for wideband data and HIPERLAN equipment. Standard Description Results Criteria EN : 1995/A1: 1998/A2: 2001 AS/NZS : 2002 EN : 2002/A1: 2002 AS/NZS : 1999 EN : 1995/A1: 2001/A2: 2001 AS/NZS : 1999 EN : 1995/A1: 2001 AS/NZS : 1999 EN : 1996/A1: 2001 AS/NZS : 1999 EN : 1994/A1: 2001 AS/NZS : 1999 Electrostatic Discharge Pass B Radio-Frequency, Electromagnetic Field Pass Electrical Fast Transient/Burst Pass B Surge Pass B Conductive Disturbance Pass A Voltage Dips / Short Interruption and Voltage Variation 30% in 10ms Pass B 60% in 100ms Pass C >95% in 5000ms Pass C EN55022:1998/A1:2000; AS/NZS CISPR 22: 2002: Limits and methods of measurement of Radio Interference characteristics of Information Technology Equipment. EN55022:1998/A1:2000; AS/NZS CISPR 22: 2002 EN55022:1998/A1:2000; AS/NZS CISPR 22: 2002 EN : 2000 AS/NZS : 2003 EN : 1995/A1: 2001 AS/NZS : 1998 Standard Description Results Criteria Conductive Test Pass B Radiated Test NA Not Applicable Standard Description Results Limits for harmonics current emissions Limits for voltage fluctuations and flicker in low-voltage supply systems. A Pass Pass

9 Description of Support Equipment Support Unit 1. Description Acer Wireless LAN/Broadband/ISDN Router Model 914I Serial Number N/A AC-AC Adaptor OEM (Model: AA-091ABM) 2-pin Power Cord Non-shielded, Detachable Support Unit 2. Description: Model: Serial Number: A/C Adapter: DSUB In: DVI In: S-Video In: Power Cord: FCC ID: Support Unit 3. Description: Model Number: Serial Number: Power Supply Type: Power Cord: FCC ID: Support Unit 4. Description: Model Number: Serial Number: Power Supply Type: Power Cord: FCC ID: Support Unit 5. Description: Model Number: Serial Number: Power Supply Type: Power Cord: FCC ID: DELL LCD Monitor 2000FP N/A DELL (Model: ADP-70EB) One 15 Pins One Pins One7 Pins Non-shielded, Detachable (Comply with FCC DOC) SONY Memory Stick Card MSA-4A 4MB N/A N/A N/A N/A (Comply with FCC DOC) KOREA SmartMedia Card K9S2808V0B-SSB0 16MB N/A N/A N/A N/A (Comply with FCC DOC) CompactFlash Card SDCFB 32MB N/A N/A N/A N/A (Comply with FCC DOC)

10 Support Unit 6. Description: Model Number: Serial Number: Power Supply Type: Power Cord: FCC ID: Support Unit 7. Description: Vendor: Model:: Serial No.: Power Supply Type: Power Line: Support Unit 8. Description: Vendor: Model: Serial No.: Power Supply Type: Power Line: Support Unit 9. Description: Vendor: Model: Serial No.: Power Supply Type: Power Line: Support Unit 10. Description: Vendor: Model:: Serial No.: Power Supply Type: Power Line: Support Unit 11. Description: Vendor: Model:: Serial No.: Power Supply Type: Power Line: -4- HAGIWARA SD Card HPC-SD64M 64MB N/A N/A N/A N/A (Comply with FCC DOC) Speaker acer M1118B NA None None USB Keyboard acer KU-0355 R31310 None None USB Mouse acer M-UVACR1 LZC422024C4 None None PS/2 Keyboard acer KB-2971 NA None None PS/2 Mouse acer M-SBJ96 NA None None

11 Support Unit 12. Description: External Hard Disk Case Manufacturer : TeraSys Model Number: F12-UF Serial Number NA Power Supply Type: YHI(Model:YS-1015U12) 1394 Port: one 6-Pins USB: one 4-Pins Power In: one Power Cable: Non-shielded, Detachable, (Can Dismantle) -5-

12 Support Unit 13. Description: Personal Computer Condition: Pre-Production Model: Veriton 6800;Aspire E600 Serial Number: N/A Housing: Foxconn(Model: H401) Power Supply: FSP (Model: FSP300-60THA(1PF)) ( V,3.5A,50Hz) Hard Disk Driver(S-ATA): Seagate (Model: ST AS) 250GB or Floppy Driver: Panasonic (Model: JU-256A048PC) DDR:(0ption) DDRII-400 Infineon 1GB (Model: HYS64T128020HU-5-A)*4 Combo Liteon (Model: SOHC-5232K) Modem Card: Liteon (Model: D-1156I#/A1A) VGA Card: Leadtek (Model: LTK LR2A22 GF6600) PS2 Connector: two 6-pin USB 2.0 Connector: eight 4-pin 1394 Connector: one 6-pin VGA Port: one 15-pin Parallel Port: one 25-pin Serial Port: one 9-pin LAN Port: one 8-pin(10/100/1000Mbps) Microphone Port: two Speaker Out Port: five Line In Port: one 7-in-1 Memory Card Reader: KYE (Model:ID03)(For Veriton 6800) SD/MMC Socket: one CF Socket: one SM/XD Socket: one MS Socket: one Power cord: Non-shielded, Detachable FSB&Speed & CPU FSB Speed CPU 800MHz 200 MHz Pentium GHz -6-

13 Software for Controlling Support Unit Test programs exercising various part of EUT were used. The programs were executed as follows: 1. Read/Write to the disk. 2. Running BurnIn.exe to send signal to the earphone. 3. Receive signal from Microphone through Microphone Port. 4. Receive signal from Radio through Audio In Port. 5. Running BurnIn.exe to send signal to the printer. 6. Running BurnIn.exe to send signal to Modem. 7. Running BurnIn.exe to send H to TV. 8. Running BurnIn.exe to send H to D-SUB Monitor. 9. Running BurnIn.exe to send H to LCD Monitor. 10. Running BurnIn.exe to Read/Write CardReader. 11. Running Hypertrm.exe to send signal to Server through Modem Card. 12. Running BurnIn.exe to send signal to Server through LAN port. 13. Running BurnIn.exe to read/write external CardReader through USB signal Cable. 14. Repeat the above steps. Filename Issued Date LAN BurnIn.exe 2003/2/21 Telephone Hypertrm.exe 2001/6/8 LCD Monitor BurnIn.exe 2003/2/21 D-SUB Monitor BurnIn.exe 2003/2/21 TV BurnIn.exe 2003/2/21 Modem BurnIn.exe 2003/2/21 Printer BurnIn.exe 2003/2/21 LCD Monitor BurnIn.exe 2003/2/21 DVD-ROM BurnIn.exe 2003/2/21 CardReader BurnIn.exe 2003/2/21

14 I/O Cable Condition of EUT and Support Units Description Path Cable Length Cable Type Connector Type Monitor Data Cable 1394 Signal Cable*1 USB Speaker signal Cable USB Speaker signal Cable USB Keyboard signal Cable USB Mouse signal Cable PS/2 Mouse signal Cable PS/2 Keyboard signal Cable VIVO signal Cable FM Signal Cable Coaxial Cable LCD Monitor to EUT DVI Port External HDD to EUT 1394 Port USB Speaker to PC USB port USB Speaker to PC Line out port USB Keyboard to PC USB Port USB Mouse to PC USB Port PS/2 Mouse to PC PS/2 Mouse Port PS/2 Keyboard to PC PS/2 Keyboard Port To Tuner Card s VI Port with dummy To Tuner Card s FM Port with dummy To Tuner Card s TV Port with dummy 1.5M Shielded, Detachable Metal Head 1.5M Shielded, Detachable Metal Head 1.5M Non-shielded, Un-detachable 1.5M Non-shielded, Un-detachable Metal Head Plastics Head 1.8M Shielded, Un-detachable Metal Head 1.8M Shielded, Un-detachable Metal Head 1.8M Shielded, Un-detachable 1.8M Shielded, Un-detachable 1.8M Shielded, Un-detachable 2M 1M Shielded, Un-detachable Shielded, Un-detachable Metal Head Metal Head Metal Head Metal Head Metal Head

15 Description of Equipment Under Test EUT Description: WLAN ABG MINIPCI Model No.: DCMA-81;CM10;VZA-82 Brand: WNC Frequency Range a: 5150~5350 MHz, 5470~5725 MHz Frequency Range b/g: 2400~ MHz Support channel: a 19 Channels b/g 13 Channels Modulation Skill: a Normal mode OFDM (6 Mbps 54 Mbps) b DBPSK(1Mbps), DQPSK(2Mbps), CCK(5.5/11Mbps) g Normal mode OFDM (6M - 54Mbps) Antennas Type: Antenna Connected: Antenna peak Gain: Power Type of LAN module: SMA Dual Band Antenna, P/N: F1B made by LONG CHU ELECTRONICS CO., LTD. The antenna is connected to the RF connector of the PCB through a short reverse SMA cable. 2.2 dbi (11b/g), 3.53 dbi (11a) 3.3V DC from Notebook PC The channel and the operation frequency of b / g mode were listed below: Channel Frequency(MHz) Channel Frequency(MHz)

16 -10- The channel and the operation frequency of a Normal Mode is listed below: Channel Frequency (MHz) Channel Frequency (MHz)

17 Emission Test 3.1 Power Main Port Conducted Emissions Configuration and Procedure EUT Configuration The EUT was set up on the non-conductive table that is 1.0 by 1.5 meter, 80cm above ground. The wall was 40cm to the rear of the EUT. Power to the EUT was provided through the LISN. The impedance vs. frequency characteristic of the LISN is complied with the limit of standards used. Both lines (neutral and hot) were connected to the LISN in series at testing. A coaxial-type connector which provides one 50 ohms impedance termination was connected to the test instrument. The excess length of the power cord was folded back and forth at the center of the lead to form a bundle 30cm to 40cm in length. Any changes made to the configuration or modifications made to EUT during testing, are noted in the following test record. If EUT has an extra auxiliary AC outlet which can provide power to an external monitor, all measurements will be made with the monitor power from EUT-mounted AC outlet and then from floor-mounted AC outlet Test Procedure The system was set up as described above, with the EMI diagnostic software running. The main power line conducted EMI tests were run on both hot and neutral conductors of the power cord and the results were recorded. The effect of varying the position of the interface cables has been investigated to find the configuration that produces maximum emission. At the frequencies where the peak values of the emissions were higher than 6dß below the applicable limits, the emissions were also measured with the quasi-peak detectors. At the frequencies where the quasi-peak values of the emissions were higher than 6dß below the applicable average limits, the emissions were also measured with the average detectors. The highest emissions were analyzed in details by operating the spectrum analyzer in fixed tuned mode to determine the nature of the emissions and to provide information which could be useful in reducing their amplitude EMI Receiver/Spectrum Analyzer Configuration (for the frequencies tested) Frequency Range: 150KHz--30MHz Detector Function: Quasi-Peak / Average Mode Resolution Bandwidth: 9KHz

18 General Power Main Port Conducted Test Configuration 40 cm EUT 50Ω Non-Conducted Table 50Ω AE CDN 80 cm LISN LISN Metal Ground Plane Filter Filter Printer Control PC Receiver

19 Test Data: Table Power Line Conducted Emissions (Hot) Temperature (C): 18 Humidity (%): 56 Frequency LISN Loss Cable Loss QP Corrct. QP Limit QP Margin AVE Corrct. AVE Limit AVE Margin MHz (db) (db) Amp. (dbuv) (db) Amp. (dbuv) (db) (dbuv) (dbuv) * Note: Margin = Corrected Amplitude - Limit Corrected Amplitude = Receiver Reading + LISN Loss + Cable Loss A margin of -8dB means that the emission is 8dB below the limit

20 -14- Table Power Line Conducted Emissions (Neutral) Temperature (C): 18 Humidity (%): 56 Frequency LISN Loss Cable Loss QP Corrct. QP Limit QP Margin AVE Corrct. AVE Limit AVE Margin MHz (db) (db) Amp. (dbuv) (db) Amp. (dbuv) (db) (dbuv) (dbuv) * Note: Margin = Corrected Amplitude - Limit Corrected Amplitude = Receiver Reading + LISN Loss + Cable Loss A margin of -8dB means that the emission is 8dB below the limit

21 Harmonics test Port: AC mains Active Input Power: >75W Basic Standard: EN /AS/NZS Test Procedure Test Duration: Class: (details referred to Sec 2.2) refer to ISL QA T04-S43 2.5min D Test Procedure The EUT is supplied in series with shunts or current transformers from a source having the same nominal voltage and frequency as the rated supply voltage and frequency of the EUT. The EUT is configured to its rated current with additional resistive load when the testing is performed. Equipment having more than one rated voltage shall be tested at the rated voltage producing the highest harmonics as compared with the limits. Result Performance of EUT complies with the given specification.

22 Test Data -16- Standard Maximum Maximum Mean Mean Standard Standard Pass (P) Harmonic Limit Value Value Value Value Deviation Deviation or Number (A rms) (A rms) (% Limit) (A rms) (% Limit) (A rms) (% Limit) Fail (F)

23 -17-

24 Voltage Fluctuations test Port: AC mains Basic Standard: EN /AS/ AS/NZS Test Procedure Observation period: (details referred to Sec 2.2) refer to ISL QA T04-S44 For Pst 10min For Plt 2 hours Test Procedure The EUT is supplied in series with reference impedance from a power source with the voltage and frequency as the nominal supply voltage and frequency of the EUT. Result Performance of EUT complies with the given specification.

25 Test Data -19- Observation period: short time ( 10 min) Final Test Summary: Dmax: 0.0 Pst: 0.07 P_0.1: 0.01 Dc: 0.0 Plt: 0.07 P_1s: 0.01 Dt: 0.00 Plt Threshold: 0.65 P_3s: 0.01 P_10s: 0.01 P_50s: 0.01 Observation period: long time ( 2 hours) Final Test Summary: Dmax: 0.0 Pst: 0.07 P_0.1: 0.01 Dc: 0.0 Plt: 0.07 P_1s: 0.01 Dt: 0.00 Plt Threshold: 0.65 P_3s: 0.01 P_10s: 0.01 P_50s: 0.01

26 Immunity Test 4.1 Electrostatic discharge (ESD) immunity test Port: Enclosure Basic Standard: EN / AS/NZS (details referred to Sec 2.2) Test Level: Air +/- 2 kv, +/- 4 kv, +/- 8 kv Contact +/- 2 kv, +/- 4 kv Criteria: B Temperature: 14 degree C Humidity: 60% Selected Test Point Air: discharges were applied to slots, aperture or insulating surfaces. 10 single air discharges were applied to each selected points. Contact: Total 200 points minimum were to the selected contact points. Indirect Contact Points: 25 discharges were applied to center of one edge of VCP and each EUT side of HCP with 10 cm away from EUT. Test Setup EUT is 1m from the wall and other metallic structure. When Battery test mode is needed, a cable with one 470KΩ resister at two rare ends is connected from metallic part of EUT and screwed to HCP. For battery test mode 10cm VCP: 0.5m x 0.5m 470KΩ 470K 80cm EUT 0.5mm insulation HCP: 1.6m x 0.8m Non-Metallic Table 470KΩ Ground reference Plane Test Result Performance of EUT complies with the given specification.

27 Radio-Frequency, Electromagnetic Field immunity test Port: Enclosure Basic Standard: EN / AS/NZS (details referred to Sec 2.2) Test Level:: 3 V/m Modulation: AM 1KHz 80% Frequency range: 80 MHz~1 GHz 1400MHz~ 2000MHz Frequency Step: 1% of last step frequency Step time: 800 ms Polarization: Vertical and Horizontal EUT Azimuth Angle Criteria: A Temperature: 18 degree C Humidity: 63 % Test Setup The field sensor is placed at one calibration grid point to check the intensity of the established fields on both polarizations. EUT is adjusted to have each side of EUT face coincident with the calibration plane. A CCD camera and speakers are used to monitor the condition of EUT for the performance judgment. Test Result Performance of EUT complies with the given specification.

28 Electrical Fast transient/burst immunity test Port: AC mains Basic Standard: EN / AS/NZS (details referred to Sec 2.2) Test Level: AC Power Port: +/- 1 kv Rise Time: 5ns Hold Time: 50ns Repetition Frequency: 5KHz Criteria: B Temperature: 14 degree C Humidity: 60% Test Procedure The EUT was setup on a nonconductive table 0.8 m above a reference ground plane. Test Points Polarity Result Comment Line + N 60 sec - N 60 sec Neutral + N 60 sec - N 60 sec Ground + N 60 sec - N 60 sec Line to + N 60 sec Neutral - N 60 sec Line to + N 60 sec Ground - N 60 sec Neutral to + N 60 sec Ground - N 60 sec Line to Neutral + N 60 sec to Ground - N 60 sec Note: N means normal, the EUT function is correct during the test.

29 -23- Test Setup EUT is at least 50cm from the conductive structure. AC main: L<=1m EUT 0.5mm insulation support test generator 80cm Non-metallic table Capacitive coupling AE Metal Full Soldered Ground Plane 0.1m insulation support Test Result Performance of EUT complies with the given specification.

30 Surge immunity test Port: AC mains Basic Standard: EN / AS/NZS (details referred to Sec 2.2) Test Level: AC Power Port Line to Line: +/- 0.5 kv Line to Earth: +/- 0.5 kv, +/- 1 kv Rise Time: 1.2us Hold Time: 50us Repetition Rate: 30 second Angle: Criteria: B Temperature: 14 degree C Humidity: 60% Test Setup AC power supply and Voltage Supply to EUT To the Peripherals EUT To AC main Supply Non-Metallic / Non-Conducted Table Transient cm Metal Full Soldered Ground Plane Test Result Performance of EUT complies with the given specification.

31 Immunity to Conductive Disturbance Port: AC mains Basic Standard: EN / AS/NZS (details referred to Sec 2.2) Test Level:: 3 V Modulation: AM 1KHz 80% Frequency range: 0.15 MHz - 80MHz Frequency Step: 1% of last Frequency Step time: 1000 ms Criteria: A Temperature: 14 degree C Humidity: 60% Test Setup Test Generator To AC main 6d B CDN 10~30cm >3cm EUT 0.1 m support 50 CDN To AE Reference Ground Plane Test Result Performance of EUT complies with the given specification.

32 Power Frequency Magnetic field immunity test Port: Enclosure Basic Standard: EN / AS/NZS (details referred to Sec 2.2) Test Level: N/A Polarization: X, Y, Z Criteria: A Temperature: 14 degree C Humidity: 60% Test Setup <3M Induction Coil (1m x To AC To AC i EUT Insulation A E Metal Ground l Test Generator 80c Non-Metallic Metal Ground plane strip Ground Reference Plane Test Result NA

33 4.7 Voltage Dips, Short Interruption and Voltage Variation immunity test Port: AC mains Basic Standard: EN / AS/NZS (details referred to Sec 2.2) Test Level: Criteria: 30% for 10ms B Test Level: Criteria: 60% for 100ms C Test Level: Criteria: >95% for 5000ms C Phase: 0 ; 180 Test intervals: 3 times with 10s each Temperature: 14 degree C Humidity: 60% -27- Test Setup EUT AC supply EUT To AE To AC main Test Generator 80cm Non-Metallic Table Ground Reference Plane Test Result Performance of EUT complies with the given specification.

34 Test Equipment List Location Equipment Name Brand Model S/N Last Cal. Date Next Cal. Date EN61K-3-2/3 DC Burn-In Load -3 D-RAM DBS N/A N/A EN61K-3-2/3 Harmonic/Flicker HP 6842A 3531A /09/ /09/2006 Test System EN61K-4-2 Digital MicroLife HT-2126G /30/ /30/2006 Hygro-Thermometer EN61K-4-2 ESD Gun Schaffner NSG /08/ /08/2006 EN61K-4-3 BILOG Antenna 06 Schaffner CBL6112B 2754 N/A N/A EN61K-4-3 Amplifier AR 250W1000A N/A N/A 80Mz~1GHz 250W EN61K-4-3 Amplifier AR 60S1G N/A N/A 800MHz~3.0GHz 60W EN61K-4-3 Broadband coupler Amplifier DC N/A N/A 10K~220Mhz Research EN61K-4-3 Broadband Coupler Amplifier DC N/A N/A 80M~1GHz Research EN61K-4-3 Broadband Couplier Werlatone C N/A N/A 1~4GHz EN61K-4-3 Coaxial Cable Chmb Belden RG-8/U Chmb N/A N/A 04-3M M-2 EN61K-4-3 Signal Generator 03 Anritsu MG3642A /14/ /14/2007 EN61K-4-4 EFT Simulator NoiseKen FNS-103L 5079H /20/ /20/2006 EN61K-4-5 CDN Surge Kit 02 EMC-PARTN CDNKIT100 CDNKIT100 11/01/ /01/2007 ER 0T; DN-T1; DN-T2; CN-T1; CN-T EN61K-4-5 Transient EMC Partner Transient-100 TRA /01/ /01/ EN61K CDN FCC Inc. FCC &0211 N/A N/A ADAPTER KIT CDN 0 EN61K CDN FCC Inc. FCC &0211 N/A N/A ADAPTER KIT CDN 2 EN61K-4-6 CDN M2+M3 02 Frankonia M2+M3 A /12/ /12/2006 EN61K-4-6 CDN T2 04 FCC Inc. FCC-801-T /22/ /22/2006 EN61K-4-6 CDN T4 03 FCC Inc. FCC-801-T /22/ /22/2006 EN61K-4-6 Coaxial Cable N/A N/A 02-1 EN61K-4-6 Coaxial Cable N/A N/A

35 -29- Location Equipment Name Brand Model S/N Last Cal. Date Next Cal. Date EN61K-4-6 Conducted Immunity Frankonia CIT-10/75 102C /05/ /05/2006 Test System EN61K-4-6 EM-Clamp Schaffner KEMZ N/A N/A EN61K-4-6 Universal CDN KAL Frankonia KAL n/a N/A N/A Kit 02 EN61K-4-8 Clamp Meter Prova /15/ /15/2006 EN61K-4-8 Magnetic Field FCC F L N/A N/A Immunity Loop -1M EN61K-4-8 Magnetic Field Test FCC F G N/A N/A Generator -125A EN61K-4-11 Voltage Dip Simulator NoiseKen VDS-220B 5079D /20/ /20/ Software for Controlling Spectrum/Receiver and Calculating Test Data Test Item Filename Version Lung_Tan Conduction Tile.exe 2.3.B EN IEC1000.EXE 1.0F EN IEC1000.EXE 1.0F EN Tile.Exe 2.0.P EN EN Application Software 1.13.e EN N/A 2.0 EN N/A 2.0 EN Tracs.Exe 2.0 EN EN N/A N/A

36 Photographs 6.1 Photo of ESD measurement 6.2 Photo of RF Field Strength Susceptibility Measurement.

37 Photo of Electrical Fast Transient/Burst measurement 6.4 Photo of Surge measurement

38 6.5 Photo of Conductive Measurement Photo of Magnetic field measurement NA

39 6.7 Photo of Voltage Dips measurement Photo of Harmonics and Voltage Fluctuations

40 Appendix: Photographs of EUT Please refer to the File of ISL-06LR003P