Together, we create value BZL MIG/MAG. B.L.Metál Hungária Kft Budapest, Vágóhíd u. 55. Telefon: Fax:

Size: px
Start display at page:

Download "Together, we create value BZL MIG/MAG. B.L.Metál Hungária Kft. 1201 Budapest, Vágóhíd u. 55. Telefon: +36 1 283 3614 Fax: +36 1 287 8047"

Transcription

1 Together, we create value BZ MIG/MAG 20 Budapest, Vágóhíd u. 55. Telefon: Fax: Web:

2 TORCH 5 EN Műszaki adatok Hűtés típusa Teljesítmény 60% Huzal mérete éghűtés 400Amp 80Amp CO 2,300Amp,50Amp MIX mm mm ICV Gas nozzle Ø 2mm Contact tip Ø 0.8mmE-CU/M6X25 Torch head 5 with fitting Gas diffuser 5AK Spring 5AK Hexagonal fitting Plastic Body MIG handle Blue/Grip Trigger Screw M3X0 Joint for 5 Coaxial cable Housing for handle Back box Screw M4X6 Adaptor nut Euro central adaptor body/air cooling iner nut Brass terminal Ø 2.0X4.0mm 0.3 Teflon liner Ø 4.0X.m Blue Blue liner Ø mm Spanner for MIG torches ICT ICT20-36 ICT Budapest, Vágóhíd u. 55. MIG 5AK torch euro adaptor /spring pins MIG 5AK torch euro adaptor /spring pins MIG 5AK torch euro adaptor/sping pins

3 TORCH 24 EN Műszaki adatok Hűtés típusa Teljesítmény 60% Huzal mérete éghűtés 400Amp 250Amp CO 2,220Amp,300Amp MIX mm mm ICV080 IHJ002 IFT0882 Gas nozzle Ø 2.m Contact tip Ø.0mmE-CU/M6X25 Contact tip holder 24KD M6X26mm White ceramic gas diffuser 24KD Torch head 24 MIG handle Blue/Grip Trigger Screw M3X0 Joint for MIG handle Spring for cable support Coaxial cable Back box 2. 3 Housing for handle Screw M4X6 Adaptor nut Euro central adaptor body/air cooling iner nut Brass terminal Ø 2.0X4.0mm 0.3 IIC060 Teflon liner Ø 2.0X4.0mm Red Red liner Ø.0-.2mm Spanner for MIG torches ICT ICT26-36 ICT MIG 24KD torch euro adaptor /spring pins MIG 24KD torch euro adaptor /spring pins MIG 24KD torch euro adaptor /spring pins 20 Budapest, Vágóhíd u

4 TORCH 25 EN Műszaki adatok Hűtés típusa Teljesítmény 60% Huzal mérete éghűtés 400Amp 230Amp CO 2,300Amp,200Amp MIX mm mm ICV080 IHJ002 IFT0882 Gas nozzle Ø m Contact tip Ø.0mmE-CU/M6X28 Gas diffuser M6X Torch head 25AK Spring 25AK Plastic Body MIG handle Blue/Grip Trigger Screw M3X0 Joint for MIG handle Spring for cable support Coaxial cable Back box 2. Housing for handle Screw M4X6 Adaptor nut Euro central adaptor body/air cooling iner nut Brass terminal Ø 2.0X4.0mm 0.3 Teflon liner Ø 2.0X4.0mm Red Red liner Ø.0-.2mm Spanner for MIG torches ICT ICT27-36 ICT MIG 25AK torch euro adaptor /spring pins MIG 25AK torch euro adaptor /spring pins MIG 25AK torch euro adaptor /spring pins 20 Budapest, Vágóhíd u

5 TORCH 36 EN Műszaki adatok Hűtés típusa Teljesítmény 60% Huzal mérete éghűtés 400Amp 340Amp CO 2,300Amp MIX mm ICV080 IHJ002 IFT Gas nozzle Ø 6mm Contact tip Ø.2mmE-CU/M6X28 Contact tip holder M6X32mm White ceramic gas diffuser Torch head 36KD MIG handle Blue/Grip Trigger Screw M3X0 Joint for MIG handle Spring for cable support Coaxial cable Back box 2. 3 Housing for handle Screw M4X6 Adaptor nut Euro central adaptor body/air cooling iner nut Brass terminal Ø 3.0X4.m 0.3 Teflon liner Ø 3.0X4.m Yellow Yellow liner Ø.2-.6mm Spanner for MIG torches ICT28-36 ICT2-36 ICT Budapest, Vágóhíd u. 55. MIG 36KD torch euro adaptor/spring pins MIG 36KD torch euro adaptor/spring pins MIG 36KD torch euro adaptor/spring pins 4

6 TORCH 240 EN Műszaki adatok Hűtés típusa Teljesítmény 00% Huzal mérete Vízhűtés 400Amp 300Amp CO 2,300Amp,270Amp MIX mm mm Gas nozzle Ø 2.m Contact tip Ø.0mmE-CU/M6X25 Contact tip holder M6X26mm White ceramic gas diffuser Torch head ICV080 IHJ002 IHJ0027 IFT0822 IHJ0306 IHJ0308 MIG handle Blue/Grip Trigger Screw M3X0 Joint for MIG handle Housing Ring/Inside Spring for cable support Cable assenbly 40D-50D Clamp Ø.5 Clamp Ø 8.7 Quick connector water Ø 6mm Back box for water cooled Hose support for water cooled rear box Screw M4X6 Adaptor nut/blue Euro central adaptor body/water cooling iner nut Output water tube M5X8mm 0.8m red Plastic support for water cooling connector /red Plastic support for water cooling connector /blue Brass terminal Ø 2.0X4.0mm 0.3 Teflon liner Ø 2.0X4.0mm Red Steel liner Ø.0-.2mm Spanner for MIG torches ICH ICH25-36 ICH Budapest, Vágóhíd u. 55. MIG 240 torch euro adaptor/spring pins MIG 240 torch euro adaptor/spring pins MIG 240 torch euro adaptor/spring pins 5

7 TORCH 400/500 EN Műszaki adatok 400 Hűtés típusa Teljesítmény 00% Huzal mérete Vízhűtés 500Amp 400Amp CO CO 2 2,450Amp,350Amp,300Amp MIX mm mm Műszaki adatok Hűtés típusa Teljesítmény 00% Huzal mérete Vízhűtés 500Amp CO 2,450Amp MIX.0-.6mm ICV080 IHJ002 IHJ0027 IFT0822 IHJ0306 IHJ0308 Gas nozzle Ø 6mm Contact tip Ø.2mmE-CU/M8X30 White ceramic gas diffuser 40D-50D Contact tip holder M8X2m Torch head Torch head 50D Torch head 40D MIG handle Blue/Grip Trigger Screw M3X0 Joint for MIG handle Housing Ring/Inside Spring for cable support Cable assenbly 40D-50D Clamp Ø.5 Clamp Ø 8.7 Quick connector water Ø 6mm Hose support for water cooled rear box Screw M4X6 Back box for water cooled Adaptor nut/blue Euro central adaptor body/water cooling iner nut Output water tube M5X8mm 0.8m red Plastic support for water cooling connector /red Plastic support for water cooling connector /blue Brass terminal Ø 3.0X4.m 0.3 Teflon liner Ø 3.0X4.m Yellow Steel liner Ø.2-.6mm Spanner for MIG torches Insulator 40D-50D 20 Budapest, Vágóhíd u MIG 40D torch euro adaptor/spring pins MIG 40D torch euro adaptor/spring pins MIG 40D torch euro adaptor/spring pins MIG 50D torch euro adaptor/spring pins MIG 50D torch euro adaptor/spring pins MIG 50D torch euro adaptor/spring pins 6

8 AKATRÉSZEK FRONIUS A 2300/AW ICZ Torch head A ICI Torch head A IZH Insulator Φ 6.x3. 4 ICF Contact tip holder A ICU Contact tip 6 IZF Retaining sleeve 7 ICS Gas Nozzle Φ 7/ Φ 20x ICS Gas Nozzle Φ 2/ Φ 20x66.5 ICS Gas Nozzle Φ 0/ Φ 20x ICS Gas Nozzle Φ 2/ Φ 20x Budapest, Vágóhíd u

9 AKATRÉSZEK FRONIUS A 3000/AW ICZ Torch head A ICI Torch head AW IZH Insulator Φ 4/ Φ 6.x3(A3000) 4 IZH Insulator Φ 4/ Φ 6.x(AW4000) 5 ICF Contact tip holder M8x.25/SW4x28 6 ICU Contact tip 7 IZF Retaining sleeve (A3000/AW4000) 8 ICS Gas Nozzle Φ / Φ 22x67 ICS Gas Nozzle Φ 5/ Φ 22x67 0 ICS Gas Nozzle Φ 3/ Φ 22x65 ICS Gas Nozzle Φ 7/ Φ 22x67 2 ICS Gas Nozzle Φ 3/ Φ 22x67 20 Budapest, Vágóhíd u

10 AKATRÉSZEK FRONIUS A 4000/AW ICZ Torch head A ICI Torch head AW IZH Insulator Φ 4./ Φ 2x6(A4000) 4 IZH Insulator Φ 5/ Φ 2x0(AW5000) 5 ICF Contact tip holder M0x.25/SW3x32 6 ICU Contact tip 7 ICF White ceramic gas diffuser 8 IZF Retaining sleeve (A4000/AW5000) ICS Gas Nozzle Φ 7/ Φ 25x7.3 0 ICS Gas Nozzle Φ 5/ Φ 25x7.3 ICS Gas Nozzle Φ 7/ Φ 25x ICS Gas Nozzle Φ 20/ Φ 25x7.3 3 ICS Gas Nozzle Φ 7/ Φ 25x Budapest, Vágóhíd u. 55.

11 ÁRAMÁTADÓK BINZE, PANASONIC M6 25 -Al Cu-Cr-Zr Φ6 M6 28 Φ M8 30 Φ0 45 -Al Cu-Cr-Zr -Al Cu-Cr-Zr M6 -Al Cu-Cr-Zr Φ.0A.2A 20 Budapest, Vágóhíd u

12 ÁRAMÁTADÓK SUITABE FOR TWECO BERNARD ESAB INCON MIER SAF TREGASKISS INTERCHANGEABE AT REQUEST M6X /4-28 Code Wire ICU H-35 Φ0. " 25.m ICU Φ0.6 ICU Φ0.8 ICU Φ0..47" 37.m ICU H-40 Φ.0 ICU H-45 Φ.2 ICU H-52 Φ.3 ICU Φ.0 ICU H-6 Φ.6 6.m-/4" ICU Φ.2 ICU H-564 Φ2.0 M6X ICU AH-364 Φ.2 7.0mm-0.283" ICU AH-6 Φ.6 " 25.m ICU H-30 Φ0.8 ICU H-35 Φ0. ICU H-40 Φ.0 /4-28 ICU H-45 Φ.2 ICU HT-35 Φ0. 7.0mm-0.28" M6X " 25.m Code Wire ICU T-23 Φ0.6 ICU T-30 Φ0.8 ICU T-35 Φ0..47" 37.m 7.0mm-0.283" ICU HT-40 Φ.0 ICU HT-45 Φ.2 ICU HT-52 Φ.3 ICU HT-6 Φ.6 ICU HT-564 Φ2.0 6.m-/4" ICU T-40 Φ.0 ICU T-45 Φ.2 5/6-24 ICU H35 Φ0. ICU H45 Φ.2 ICU H52 Φ.4 /4-28 ICU Φ0.6 ICU Φ0.8 2" 50.8mm ICU H6 Φ.6 ICU H564 Φ2.0 ICU Φ0. ICU H332 Φ2.4 -/2" 38mm ICU Φ.0 ICU Φ.2 ICU H764 Φ2.8 ICU Φ.3 ICU Φ.6 8.7mm-/32" ICU Φ2.0 6.m-/4" ICU A-364 Φ.2 ICU A-6 Φ.6 5/6-24 ICU HFC35 Φ0. /4-28 ICU HFC45 Φ.2 ICU HFC52 Φ.3 -/2" 38mm 6.m-/4" ICU T-23 Φ0.6 ICU T-30 Φ0.8 ICU T-35 Φ0. ICU T-40 Φ.0 ICU T-45 Φ.2 ICU T-52 Φ.3 ICU T-6 Φ.6-5/8" 4.m 8.7mm-/32" ICU HFC6 Φ.6 ICU HFC564 Φ2.0 ICU HFC332 Φ2.4 ICU HFC764 Φ2.8 ICU HFC8 Φ3.2 ICU AHFC364 Φ.2 A ICU AHFC6 Φ.6 A 20 Budapest, Vágóhíd u. 55.

13 GÁZTEREŐK BINZE MIG Φ8 Φ Gas nozzle Ø.m Gas nozzle Ø 2mm Gas nozzle Ø 6mm Spot welding gas nozzle Ø 6mm Tapered gas nozzle Ø m MIG 24/240 Gas nozzle Ø 7mm Gas nozzle Ø 2.m Gas nozzle Ø 0mm Φ20 Spot welding gas nozzle MIG Gas nozzle Ø mm Gas nozzle Ø m Gas nozzle Ø 8mm Φ22 Φ Tapered gas nozzle Ø mm Tapered gas nozzle Ø m Spot welding gas nozzle Ø 8mm MIG 26/400/ Gas nozzle Ø 6mm/40D-50D Φ24 Gas nozzle Ø m/40d-50d Gas nozzle Ø mm/40d-50d Adjusted tapered nozzle Ø m/40d-50d Spot welding gas nozzle Ø 20mm/40D -50D MIG Gas nozzle Ø 2mm/36KD Φ24 Gas nozzle Ø 6mm/36KD Gas nozzle Ø mm/36kd Spot welding gas nozzle Ø 20mm/36KD 20 Budapest, Vágóhíd u

14 GÁZTEREŐK BINZE MIG 40KD 0 ICS Gas nozzle Φ 8mm 40KD 0 Φ26 ICS Gas nozzle Φ 2mm 40KD ICS Gas nozzle Φ m 40KD 0 0 SUITABE FOR MIG MAXI 53.5 ICS000 MC 0006 Gas nozzle Φ m MAXI50 0 Φ20 ICS0002 MC 0007 Spot Welding Gas Nozzle ICS0005 MC 0005 Gas nozzle Φ mm MAXI ICS0003 MC 0008 Gas nozzle Φ mm MAXI250 0 ICS0004 MC 000 Gas nozzle Φ m MAXI250 0 Φ24 ICS0060 MC 000 Gas Nozzle Φ 6m ICS0673 MC 028 Gas nozzle Φ 8mm MAXI250 ICS0674 MC 02 Tapered Gas Nozzle Φ ICS0066 MC 00 Gas nozzle Φ 6mm MAXI350 ICS0067 MC 002 Gas nozzle Φ 8mm MAXI Φ28 ICS0068 MC 003 Gas nozzle Φ 20mm MAXI350 ICS0743 MC 028 Nozzle Φ m Budapest, Vágóhíd u

15 DIFFÚZOROK ÉS KÖZDARABOK BINZE BZ MIG/MAG MIG 24/240 White plastic gas diffuser White ceramic gas diffuser Contact tip holder M6 ICF083 Red silicon gas diffuser MIG M6 M8 Gas diffuser M6X Gas diffuser M8X MIG 26 Cont act tip hol der M6X22mm Cont act tip hol der M8X22mm White plastic gas diffuser 22 M6 M8 2 White ceramic gas diffuser Black plastic gas diffuser MIG 36 White plastic gas diffuser Black plastic gas diffuser White ceramic gas diffuser Cont act tip holder M6X28mm 28 M6 M Cont act tip holder M8X28mm Cont act tip holder M6X32mm Cont act tip holder M8X32mm MIG 40KD MIG 40KD ICU Contact tip holder 40K D/M8/4m ICU Contact tip holder 40K D/M8/47mm ICF White plastic gas diffuser 40KD M8 ICF White ceramic gas diffuser 40KD 20 Budapest, Vágóhíd u

16 DIFFÚZOROK ÉS KÖZDARABOK BINZE MIG 400/500 Contact tip holder M8X2m/40D-50D White plastic gas diffuser Black plastic gas diffuser Contact tip holder M6X2m M6 M8 Contact tip holder M6X2mm Contact tip holder M8X2mm White cerami c gas diffuser Contact tip holder M8X2m/COPPER Contact tip holder M8X2mm/COPPER SUITABE FOR TWECO Típus Kép TW 6XThd MX.5Thd -23/32" 4m M0X.5Thd ICF Diffuser /4-28Thd /2-3Thd 2" 50.8mm 3/8-24Thd ICF Diffuser (used with 32 insulator) TW2 /4-28Thd /4-28Thd /2-3Thd 2" 50.8mm 3/8-24Thd /6-8Thd 3/8-24Thd 2-/4" 57mm ICF0073 ICF FN Diffuser (used with 23series nozzles or 34A) Diffuser TW3-TW4 /4-28Thd -/4" 3.7mm 3/8-24Thd ICF A Diffuser 5/6-24Thd -3/8" 7/6-20Thd ICF Diffuser TW5 5/6-24Thd -3/8" 7/6-20Thd ICF007 55SW Diffuser 5/6-24Thd -3/8" 7/6-20Thd ICF H Diffuser 20 Budapest, Vágóhíd u

17 HUZAVEZETŐK BINZE 0.8 IIC0065 IIC008 IIC005 IIC007 IIC mm IIC0064 IIC0070 IIC0077 IIC02 IIC0275 IIC IIC0265 IIC Budapest, Vágóhíd u

18 HUZAVEZETŐK BINZE IIC0500 IIC0560 IIC m IIC IIC0577 IIC057 IIC mm mm IIC000 IIC060 IIC m IIC m IIC008 SUITABE FOR PAN IIC0088 Black mm.0-.2mm.0 IIC008 3.m 4.m 5.m 500m IIC055 IIC0552 IIC0553 IIC mm IIC050 IIC Budapest, Vágóhíd u

19 HUZAVEZETŐK TWECO Amp (in/m) Huzal 5 (4.6m) IIC (0.6) 60A 5 (4.6m) IIC (0.8-0.) 5 (4.6m) IIC (.0-.2) 5 (4.6m) IIC (0.6) A (3.) IIC (0.8-0.) 5 (4.6m) IIC (0.8-0.) (3.) IIC (0.-.2) 5 (4.6m) IIC (0.-.2) (3.) IIC /6 (.3-.6) A 5 (4.6m) IIC /6 (.3-.6) (3.) IIC /64 (2.0) 60A 5 (4.6m) IIC /64 (2.0) 5 (4.6m) IIC /32 (2.4) A A 5 (4.6m) IIC (0.-.2) 5 (4.6m) IIC /6 (.3-.6) 5 (4.6m) IIC /64 (2.0) 5 (4.6m) IIC /32 (2.4) A Amp (in/m) Huzal 60A A 0 () IIC080 35TF (0.8-0.) 0 () IIC086 35TF /64 (.0-.2) 5 (4.6m) IIC087 42N /64 (0.8-.2) 5 (4.6m) IIC088 44N /64 (0.8-.2) 5 (4.6m) IIC08 44N-6-5 /6 (.6) A 5 (4.6m) IIC N /64 (0.8-.2) A 5 (4.6m) IIC08 45N-6-5 /6 (.6) 20 Budapest, Vágóhíd u

20 KÁBEEK EURO TYPE 5AK 24-25KD ICN0663 ICN0676 ICN0677 ICN0664 ICN067 ICN KD 36KD ICN066 ICN067 ICN06 ICN0670 ICN0672 ICN KD ICN06 ICN065 ICN06 PAN TYPE PAN80 PAN350 ICN00 ICN06 ICN07 ICN088 ICN08 ICN085 PAN500 EURO TYPE Water cooled cable 240/400/500 ICN08 ICN082 ICN083 ICD0067 ICD0068 ICD006 Power cable Gas tube IKT0064 IKT0070 IKT0076 IKH0030 IKH0036 IKH0037 Wire conduit Control wire IKH0027 IKH0028 IKH002 IHQ IHQ IHQ Water inlet tube Rubber tube IKH002 IKH0022 IKH0023 ICK0705 ICK070 ICK Budapest, Vágóhíd u. 55.

21 GYORSCSATAKOZÓK BZ MIG/MAG Quick connector Ø 6mm Red Quick connector Ø 6mm Blue Quick connector Ø 6mm Quick connector Ø 8mm Red Quick connector Ø 8mm Blue Quick connector Ø 8mm Quick connector Ø 0mm Quick connector M2X.5 Quick connector M4X Quick connector /4G Quick connector 3/8G Quick connector M2X Quick connector /8G Red Quick connector /8G Blue Quick connector /8G Quick connector Ø 6mm Quick connector Ø 8mm 20 Budapest, Vágóhíd u

22 ADAPTEREK ITC000 ITC006 ITC007 ITG6000 ITG6005 ITG600 ITG0006 ITB0055 ITB0058 ITB0600 IHJ0063 IHJ0070 IHJ007 IHJ0078 IHJ0072 Euro centra l adaptor body/sprin g pins/with Nut Water euro central adaptor body/spring pins/with Nut Euro central adaptor/water/tynos/sprin g pin Eur o central ada ptor femal er/machi ne side- axial Euro central adaptor femaler radial Mini euro central adaptor fdmale-axial Current clamp 6mm Central adaptor female machine side Mini central ada ptor femal e machi ne side Eur o central ada ptor femal e machi ne side Eur o central ada ptor femal e machi ne side Mini euro centra l adaptor female machine side Gun plug nut/plastic nut Plastic housing Gun plug nut Gun plug nut BZ type Gun plug nut new blue Gun plug nut new red Gun plug nut new orange Gun plug nut/bz type/brass screw Back box hole Back box hole Back box hole/water Plastic housing/mini Back box hole/water Spring pin with wire and insulator for air cooling Spring pin with wire and insul ator for water cool ing Control wire with pin/0.m² /800mm Blue wired hose Φ 5 8mm Red wired hose Φ 5 8mm Black wired hose Φ 5 8mm PU tube Φ 6 8mm/high tempreture Clamp Φ 7.0mm Clamp Φ 8.7mm Clamp Φ 0.m Clamp Φ.m ITG000 IHJ0645 IHQ0200 IHQ0207 IHJ006 IHJ0703 IHQ0778 IKH0070 IHJ0780 IHJ0763 IKH0075 more clamps at request ITC4006 IHJ0772 IFT0735 IFT0737 IFT0734 IFT Budapest, Vágóhíd u

23 TÖMŐK-CSÖVEK EPDM tube Φ 45 47mm/ Black EPDM tube Φ 3 3m/ Black EPDM tube Φ 35 37mm/ Black EPDM tube Φ 6 8mm/ Black EPDM tube Φ 20 22mm/ Black EPDM tube Φ 2mm/ Black EPDM tube Φ 26 28mm/ Black EPDM tube Φ 24 26mm/ Black EPDM tube Φ 6 20mm/ Black EPDM tub e Φ 4 6. m/black EPDM tube Φ m/Black EPDM tub e Φ 0.5 m/black EPDM tube Φ m/Black EPDM tube Φ.7 5.7mm/Black EPDM tube Φ 4 7mm/Black EPDM tube Φ 5 0mm/Black Rube tube Φ 22 2 m/black Rube tube Φ 25 28m m/black Rube tube Φ 28 m/black Rube tube Φ 40 4 m/black Rube tube Φ 5 5 m/black EPDM tube Φ 5 8mm/Black EPDM tube Φ 5 8mm/Blue EPDM tube Φ 0 m/ Black EPDM tube Φ 5 8mm/Red EPDM tube Φ m/black Silicon tube Φ m/white Silicon tube Φ 5 8mm/white Silicon tube Φ 0 5 mm/white Silicon tube Φ 6 mm/white PU tube Φ 4 6mm/black PU tube Φ 4 6mm/high TEMP./blue PU tube Φ 6 8mm/black PU tube Φ 6 8mm/high TEMP./blue PVC tube Φ 20 22mm/Black PVC tube Φ 26 28mm/Black PVC tube Φ 24 26mm/Black EPDM tube Φ 6 mm/black EPDM tube Φ 0 m /Black EPD M tube Φ 8.5 m /Black PVC tube Φ 0.5 m/grey PVC tube Φ m/Grey PVC wired hose Φ 5 8m m/black PVC wired hos e Φ 5 8mm /Blue PVC wired hose Φ 5 8mm/ Red nylon tube Φ 8 6mm/Black eather hose Φ 2mm =800mm/black eather hose Φ 24 26mm =800mm/black 20 Budapest, Vágóhíd u

MIG/MAG. Spare Parts List 2.0 / V1. www.binzel-abicor.com

MIG/MAG. Spare Parts List 2.0 / V1. www.binzel-abicor.com T E C H N O L O G Y F O R T H E W E L D E R S W O R L D. MIG/MAG Spare Parts List 2.0 / V1 www.binzel-abicor.com Copyright Copyright Alle Texte, Bilder, Zeichnungen und sonstige in der Gesamtpreisliste

More information

TBi Industries. MIG / MAG Welding torches TBi Expert 0. 1

TBi Industries. MIG / MAG Welding torches TBi Expert 0. 1 TBi Industries MIG / MAG Welding torches TBi Expert 1 0. 1 CONTENTS. TBi Expert Gas cooled torches TBi 150 Classic Series 60% (10 min.) Mix : 150 A CO 2 : 180 A Ø 0.6-1.0 mm Water cooled torches TBi 240

More information

TBi Industries. MIG / MAG Welding torches TBi Expert 0. 1

TBi Industries. MIG / MAG Welding torches TBi Expert 0. 1 TBi Industries MIG / MAG Welding torches TBi Expert 1 0. 1 Gas cooled torches CONTENTS. TBi Expert TBi 150 Expert Classic Series 60% (10 min.) Mix : 150 A CO 2 : 180 A Ø 0.6-1.0 mm Water cooled torches

More information

TECHNICAL GUIDE. For Self-Shielded Guns - 300, 400 and 500 amp SAFETY AND WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL DATA OPTIONS

TECHNICAL GUIDE. For Self-Shielded Guns - 300, 400 and 500 amp SAFETY AND WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL DATA OPTIONS TECHNICAL GUIDE For Self-Shielded Guns - 300, 400 and 500 amp SAFETY AND WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL DATA OPTIONS EXPLODED VIEW & PARTS LIST TROUBLESHOOTING ORDERING INFORMATION

More information

Açıklama IK-45 Hava Soğutmalı Torç. Air Cooled Torch 12-13

Açıklama IK-45 Hava Soğutmalı Torç. Air Cooled Torch 12-13 Açıklama IK-15 Hava Soğutmalı Torç IK-24 Hava Soğutmalı Torç IK-25 Hava Soğutmalı Torç IK-26 Hava Soğutmalı Torç IK-36 Hava Soğutmalı Torç IK-38 Hava Soğutmalı Torç IK-45 Hava Soğutmalı Torç IK-24 Otomasyon

More information

Robot Welding Torch System

Robot Welding Torch System T e C H N O L O G y f O R T H e W e L d e R s W O R L d. Robot Welding Torch System W W Robot welding torch system... The universal MIG/MAG-torch system for robot welding: A new interface and cable assembly

More information

ESAB MIG/MAG Robot packages Yaskawa Motoman

ESAB MIG/MAG Robot packages Yaskawa Motoman ESAB MIG/MAG Robot packages Yaskawa Motoman MA 1400 & 1900 with Aristo W8 2 Anybus Devicenet Processes used in robotic welding include: MIG/MAG MIG/MAG pulse MIG/MAG SuperPulse Short arc / pulse Pulse

More information

FE/MMT/PMT/WS MIG/MAG welding gun range

FE/MMT/PMT/WS MIG/MAG welding gun range High quality materials and effective design Key features The best combination of weight and balance ensures welding craftsmen comfortably deliver their skill weld after weld. Choose from a wide range of

More information

Magnum 250L, 250L FM & 250 SP Gun & Cable

Magnum 250L, 250L FM & 250 SP Gun & Cable P-0-H RETURN TO MAIN INDEX P-0-H PARTS LIST FOR Magnum 50L, 50L FM & 50 SP Gun & Cable MAGNUM 50L, 50L FM & 50 SP GUN & CABLE Part Numbers Part Numbers Part Numbers Part Numbers P-0-H. Magnum 50L FM 4

More information

CutMaster 82. 6.04 Major External Replacement Parts

CutMaster 82. 6.04 Major External Replacement Parts CutMaster 8 6.0 Major External Replacement Parts Item # Qty Description Catalog # Cover with labels 9-08 Base Enclosure Assembly 9-08 Tube, roll handle 9-0 Front Panel 9-07 Rear Panel 9-00 Art # A-080

More information

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK

MODEL 565E - 22 TON AIR/HYDRAULIC AXLE JACK 1 565AKHU HYDRAULIC 1.22 O-RING - 2 REQUIRED UNIT 1.23 O-RING COMPLETE 1.24 TEFLON O-RING 2 REQUIRED 1.3 EXTENSION SCREW 1.3A SPRING PIN 1.4 SPRING SUPPORT 1.5 SCREW BUSHING 1.6 Y SHAPE SEAL RING 1.7 HEAD

More information

Centricut plasma torches and consumables for ESAB

Centricut plasma torches and consumables for ESAB plasma torches and consumables for ESAB Contents Plasma Product is available for the following major OEM brands AMADA ESAB Kaliburn KJELLBERG KOIKE KOMATSU LINCOLN THERMAL DYNAMICS WHITNEY WIEDEMANN HT,

More information

CutMaster 102. 6.04 Major External Replacement Parts

CutMaster 102. 6.04 Major External Replacement Parts CutMaster 0 6.04 Major External Replacement Parts Item # Qty Description Catalog # Cover with labels 9-08 Base Enclosure Assembly 9-086 Tube, roll handle 9-0 4 Front Panel 9-087 Rear Panel 9-00 4 Art #

More information

www.vamatec.be lassen en lasmateriaal

www.vamatec.be lassen en lasmateriaal www.vamatec.be lassen en lasmateriaal 8 www.vamatec.be NEW BZL Pro-Grip tm Features and Benefits Swan Necks High temperature resistant insulation materials reducing the risk of shorting Durable and Robust

More information

TECHNICAL GUIDE. For TOUGH GUN G1 Series Robotic Air-Cooled MIG Guns 500 amp SAFETY & WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE

TECHNICAL GUIDE. For TOUGH GUN G1 Series Robotic Air-Cooled MIG Guns 500 amp SAFETY & WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL GUIDE For TOUGH GUN G1 Series Robotic Air-Cooled MIG Guns 500 amp SAFETY & WARRANTY INFORMATION INSTALLATION MAINTENANCE GUIDE TECHNICAL DATA OPTIONS EXPLODED VIEW & PARTS LIST TROUBLESHOOTING

More information

THE WHOLE WORLD OF GAS SAFETY ENGINEERING. MINISPRAYJET Flame spraying gun

THE WHOLE WORLD OF GAS SAFETY ENGINEERING. MINISPRAYJET Flame spraying gun MINISPRAYJET MINISPRAYJET Flame spraying gun MINISPRAYJET A compact and light weight flame spraying gun Flame spraying gun thermal spraying with powder using oxy-fuel gas flame. Function and safety are

More information

TECHNICAL GUIDE. TOUGH GUN Robotic Torch System For the FANUC ARC Solution Arm

TECHNICAL GUIDE. TOUGH GUN Robotic Torch System For the FANUC ARC Solution Arm TECHNICAL GUIDE TOUGH GUN Robotic Torch System For the FANUC ARC Solution Arm INSTALLATION GOOSENECK OPTIONS MAINTENANCE SPECIFICATIONS TROUBLE SHOOTING OPTIONS PARTS BREAKDOWN Certified ISO 9001 :2000.

More information

5-Other arc welding WELDING TOOLS AND ACCESSORIES

5-Other arc welding WELDING TOOLS AND ACCESSORIES WELDING TOOLS AND ACCESSORIES -Other arc welding ARC WELDING OTHER Cables and connectors... 80 to 81 Clamps... 82 to 83 Magnetic ground clamps... 84 to 8 Hammers / brushes... 86 Miscellaneous... 87 Accessories...

More information

For Models 347SM, 407SM, 507SM INSTALLATION, OPERATIONS AND REPLACEMENT PARTS MANUAL

For Models 347SM, 407SM, 507SM INSTALLATION, OPERATIONS AND REPLACEMENT PARTS MANUAL Air-Cooled Smoke Extraction Semi-Automatic MIG Torches For Models 347SM, 407SM, 507SM INSTALLATION, OPERATIONS AND REPLACEMENT PARTS MANUAL 0 TABLE OF CONTENTS INTRODUCTION/WARRANTY... 1 GENERAL SAFETY...

More information

TORCH SYSTEM PAGE PT-15 /PT-15XL PCM-8,ESP-300,ESP-400,ESP-600,ESP-1000... 2,3 PT-19XLS /PT-19XL ESP-200/300/400/600/1000,PCM8XL,PCM150/1500...

TORCH SYSTEM PAGE PT-15 /PT-15XL PCM-8,ESP-300,ESP-400,ESP-600,ESP-1000... 2,3 PT-19XLS /PT-19XL ESP-200/300/400/600/1000,PCM8XL,PCM150/1500... TORCH SYSTEM PAGE PT-15 /PT-15XL PCM-8,ESP-300,ESP-400,ESP-600,ESP-1000... 2,3 PT-19XLS /PT-19XL ESP-200/300/400/600/1000,PCM8XL,PCM150/1500... 4,5 PT-600 ESP200/400/600C/1000.PCM8XL,PCM150/1500... 6 PT-17A

More information

Cables. Accessories. For Force, Torque and Strain Sensors

Cables. Accessories. For Force, Torque and Strain Sensors Accessories Cables For Force, Torque and Strain Sensors Charge mode, high impedance piezoelectric measurement demands highly insulated coaxial cables and connectors to ensure an insulation resistance greater

More information

OVEN PARTS For Models:GSC308PJB05, GSC308PJQ05, GSC308PJT05, GSC308PJS05 (Black) (White) (Biscuit) (Black Stainless)

OVEN PARTS For Models:GSC308PJB05, GSC308PJQ05, GSC308PJT05, GSC308PJS05 (Black) (White) (Biscuit) (Black Stainless) OVEN PARTS 30" BUILT IN ELECTRIC COMBO SENSOR/SC (GOLD LINE) 3 05 Litho In U.S.A. (cre) 1 Part No. Rev.A OVEN PARTS 1 Literature Parts 4455994 Installation Instructions Use & Care Guide 8300346 Microwave

More information

VBRC410 : 001 - MAIN ASSY [1/8]

VBRC410 : 001 - MAIN ASSY [1/8] VBRC410 : 001 - MAIN ASSY [1/8] Page 1 of 16 VBRC410 : 001 - MAIN ASSY [1/8] Ref # Part Number Qty. Description 1 PW300304 LARGE END CAPS 2 PW300305 SUB TO PW300349 - MINI BRACKET/TUBE ASSEMBLY-CHRO 3

More information

IVECO SCANIA VOLVO MERCEDES

IVECO SCANIA VOLVO MERCEDES IVECO SCANIA VOLVO MERCEDES PART NO. Description PART NO. DESCRIPTION PART NO. DESCRIPTION PART NO. DESCRIPTION 4610504 SILICONE HOSE 0084027 SILICONE HOSE 230191 HOSE ASSY 000 501 00 82 TURBO HOSE 4610505

More information

Laser diffuse reflection light scanner with background suppression. Dimensioned drawing

Laser diffuse reflection light scanner with background suppression. Dimensioned drawing Specifications and description HRTL 3B Laser diffuse reflection light scanner with background suppression Dimensioned drawing We reserve the right to make changes DS_HRTL3B_en.fm en 01-2010/12 50114049

More information

GRS tacho. 1.GRS tachograph service parts

GRS tacho. 1.GRS tachograph service parts 1311 1311 exchange, rebuild and used on request 1314 1314 exchange, rebuild and used on request 1318 1318 exchange, rebuild, used on request 1319 1319 exchange, rebuild and used on request 1324 1324 exchange,

More information

gastroparts WTYCZKI I KONEKTORKI Części zamienne do urządzeń: KAWA www.gastroparts.pl www.gastroparts.pl GASTROPARTS Sp. J.

gastroparts WTYCZKI I KONEKTORKI Części zamienne do urządzeń: KAWA www.gastroparts.pl www.gastroparts.pl GASTROPARTS Sp. J. www.gastroparts.pl gastroparts KAWA Części zamienne do urządzeń: WTYCZKI I KONEKTORKI GASTROPARTS Sp. J. Klonowica 7 87-00 Toruń tel. +48 6 67 00 68 fax +48 6 67 00 67 gastroparts@gastroparts.pl www.gastroparts.pl

More information

Electromagnetic pump designation GOTEC

Electromagnetic pump designation GOTEC Electromagnetic pump designation GOTEC E T S 21 - E : In beginning of the designation for all pumps based on the Electromagnetic principle. 1 T : means the complete square motor (coil + metallic frame

More information

Cable Plug acc. to DIN EN 175301-803, Form A

Cable Plug acc. to DIN EN 175301-803, Form A Cable Plug acc. to DIN EN 175301-803, Form A Complete program Contact form 18 mm Also available with LED indicator Optional 4-pin version for pressure switch or impulse valves respectively Versions with

More information

OVEN PARTS For Models:GMC305PDB07, GMC305PDQ07, GMC305PDT07, GMC305PDS07 (Black) (White) (Biscuit) (S.Steel)

OVEN PARTS For Models:GMC305PDB07, GMC305PDQ07, GMC305PDT07, GMC305PDS07 (Black) (White) (Biscuit) (S.Steel) OVEN PARTS 30" BUILT IN ELECTRIC COMBO SENSOR/SC (GOLD LINE) 7 03 Litho In U.S.A. (cre) 1 Part No. OVEN PARTS NOTE: The screws and nuts required to attach a part are listed immediately following that part.

More information

PAM Connectors. PAM Bayonet Connectors

PAM Connectors. PAM Bayonet Connectors PAM Bayonet Tel : 33 (0)1 60 84 21 40 Fax : 33 (0)1 60 84 43 81 info@bernier.tm.fr www.bernier.tm.fr Overview Miniature audio connectors with bayonet locking system, equipped with 07 or 10 contacts, and

More information

OVEN PARTS For Models:RBS305PDB16, RBS305PDQ16, RBS305PDT16, RBS305PDS16 (Black) (Designer White) (Biscuit) (S.Steel)

OVEN PARTS For Models:RBS305PDB16, RBS305PDQ16, RBS305PDT16, RBS305PDS16 (Black) (Designer White) (Biscuit) (S.Steel) OVEN PARTS 30" BUILT IN ELECTRIC OVEN SELF CLEAN 10 04 Litho in U.S.A.(cre) 1 Part No. OVEN PARTS 1 Literature Parts LIT8300654 Installation Instructions LIT8300772 Use & Care Guide (Oven) LIT8301758 Tech

More information

AEC 200-4D DIRECT CONNECT SOLID STATE SPOOL GUN OPERATION AND PARTS MANUAL DIRECT CONNECTS TO: MILLER & PROFAX CV POWER SOURCES

AEC 200-4D DIRECT CONNECT SOLID STATE SPOOL GUN OPERATION AND PARTS MANUAL DIRECT CONNECTS TO: MILLER & PROFAX CV POWER SOURCES AEC 200-4D DIRECT CONNECT SOLID STATE SPOOL GUN OPERATION AND PARTS MANUAL DIRECT CONNECTS TO: MILLER & PROFAX CV POWER SOURCES FOR CONSTANT VOLTAGE POWER SOURCES ONLY 00144OG050809 P.O. BOX 898 PEARLAND,

More information

SMD Rework Station TABLE OF CONTENTS

SMD Rework Station TABLE OF CONTENTS SMD Rework Station Thank you for purchasing the Hakko 50B SMD Rework Station. The Hakko 50B is designed to solder and desolder surface mounted devices with hot air. Please read this manual before operating

More information

DESIGNED TO WORK BY WELDERS, FOR WELDERS.

DESIGNED TO WORK BY WELDERS, FOR WELDERS. DESIGNED TO WORK BY WELDERS, FOR WELDERS. A distinctive design in form, colour and ergonomics TRANSLAS AND FORCE the only Dutch manufacturer of welding torches and related products who produce their products

More information

125 DUKE EU 2011 SPARE PARTS MANUAL: CHASSIS ENGLISH ART.NO.: 3CF8003K4EN

125 DUKE EU 2011 SPARE PARTS MANUAL: CHASSIS ENGLISH ART.NO.: 3CF8003K4EN SPARE PARTS MANUAL: CHASSIS ART.NO.: 3CF8003K4EN ENGLISH INDEX FRONT FORK, TRIPLE CLAMP HANDLEBAR, CONTROLS FRAME SIDE / CENTER STAND 3x 4x 5x 6x SHOCK ABSORBER SWING ARM EXHAUST SYSTEM AIR FILTER 7x

More information

VE13P-EU. Model: VE13. Lista Części Polish

VE13P-EU. Model: VE13. Lista Części Polish Model: VE13 Lista Części Polish Spis Treści Handle 3 Base 5 Wiring - Wear and Tear parts 7 DF100-A Foam Generator art no. 50000055 9 RECOMMENDED SPARE PARTS 13 Handle VE02 3 Handle VE02 4 Poz Numer katalogowy

More information

Quick Connect Boxes Inside Gloveboxes

Quick Connect Boxes Inside Gloveboxes ULC Series Junction Boxes Quick Connect Boxes Inside Gloveboxes The ULC quick connect junction boxes are the essential elements to optimize the cabling inside gloveboxes. Large range Designed for nuclear

More information

MDT5N25 & MTD5N40 SERVICE PARTS

MDT5N25 & MTD5N40 SERVICE PARTS MDTN & MTDN0 SERVICE PARTS This parts list contains the service parts and wiring diagrams for this model. Check the model number of the machine requiring the parts to be sure that this is the correct parts

More information

400 Series - Mini USB Buccaneer

400 Series - Mini USB Buccaneer IP68 Sealed IP68 rated USB V2.0 performance Plug and play capability Shielded system Overmoulded cables Screw coupling PCB versions Dust and waterproof to EN60529 Data rates up to 480Mbs Hot pluggable,

More information

ASSORTMENTS. Imperial Drawer Assortments Your Key to Efficient Maintenance and Repair. Ready To Get Organized? Imperial Drawer Assortments:

ASSORTMENTS. Imperial Drawer Assortments Your Key to Efficient Maintenance and Repair. Ready To Get Organized? Imperial Drawer Assortments: Imperial Drawer Assortments Your Key to Efficient Maintenance and Repair. Overall Drawer Size 18" W x 3" H x 12" D Imperial Drawer Assortments: 1. Contain the most popular sizes and styles. 2. Each part

More information

Foam Unit PROFOAM-R USER GUIDE

Foam Unit PROFOAM-R USER GUIDE Tous droits réservés Foam Unit PROFOAM-R Service / Site : QUAL / France Référence : 009 Version : V.0.0 Date version : 07/07/0 Page : /9 USER GUIDE WALL Foam unit PROFOAM-R - Installation Montage des buses

More information

FANG 24T, 26T and 28T -EU

FANG 24T, 26T and 28T -EU Model: FANG 24T FANG 26T FANG 28T Lista Części Polish Spis Treści Solution tank 3 Recovery tank 5 Brush lift - Drive 7 Brush - Pad Drive 9 Solution Control 11 Brush skirt 13 Control housing 15 Squeegee

More information

SHOT BLAST CABINET MODEL NO: CSB20B

SHOT BLAST CABINET MODEL NO: CSB20B SHOT BLAST CABINET MODEL NO: CSB20B PART NO: 7640110 USER INSTRUCTIONS GC0216 INTRODUCTION Thank you for purchasing this CLARKE Shot Blast Cabinet which is designed for professional workshop use. Before

More information

A&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS

A&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS A&A CORVETTE PERFORMANCE C6 BOOST & FUEL GAUGE INSTALLATION INSTRUCTIONS 1. Check your gauges before you take them out of the packaging to make sure they are at 0 (zero) psi for both boost and fuel pressure.

More information

VIBIEMME DOMOBAR JUNIOR 2B SPLIT-VIEW DIAGRAM AND SPARE-PARTS LIST

VIBIEMME DOMOBAR JUNIOR 2B SPLIT-VIEW DIAGRAM AND SPARE-PARTS LIST VIBIEMME DOMOBAR JUNIOR 2B SPLIT-VIEW DIAGRAM AND SPARE-PARTS LIST www.kaffemekka.dk BODYWORK Pos Description Mfr Part No 1 DRAWER HANDLE AND LID - MANCASCOPKIR 2 DOMO.SUPER JUNIOR INOX FRONT PANEL FOR

More information

User s Manual. BNC Mini-High Res, 75 Ohm Termination Kit Connector Installation Guide (60-073-01)

User s Manual. BNC Mini-High Res, 75 Ohm Termination Kit Connector Installation Guide (60-073-01) User s Manual BNC Mini-High Res, 75 Ohm Termination Kit Connector Installation Guide (60-073-01) BNC Termination Kit Instructions This document is a compilation of Extron s instructions, together with

More information

www.jinda-china.com JD15-3001 A:3.5mm mono plug to 2 3.5mm mono jacks B:3.5mm mono plug to 2 3.5mm stereo jacks JD15-3002 A:3.

www.jinda-china.com JD15-3001 A:3.5mm mono plug to 2 3.5mm mono jacks B:3.5mm mono plug to 2 3.5mm stereo jacks JD15-3002 A:3. CONTENT AUDIO ADAPTOR AUDIO ADAPTOR 1-6 JD15-3001 A:3.5mm mono plug to 2 s B:3.5mm mono plug to 2 s JD15-3008 A: to 2 s B: to 2 s JD15-3015 3.5mm mono plug to 2 s 2.5/3.5/6.35MM PLUGS 7-10 JD15-3002 A:

More information

INSTALL INSTRUCTIONS KK-C-HVAC-1 HVAC UNIT 2003-2014 CHEVROLET/GMC VANS FOR

INSTALL INSTRUCTIONS KK-C-HVAC-1 HVAC UNIT 2003-2014 CHEVROLET/GMC VANS FOR INSTALL INSTRUCTIONS KK-C-HVAC-1 HVAC UNIT 2003-2014 CHEVROLET/GMC VANS FOR (For NEW 2007 ALL WHITE KWIK-KITS ONLY) Warning do not attempt to install A/C units unless you are experienced with servicing

More information

SPECIFICATION FOR SYNERGIC MIG / MAG WELDING MACHINE

SPECIFICATION FOR SYNERGIC MIG / MAG WELDING MACHINE SPECIFICATION FOR SYNERGIC MIG / MAG WELDING MACHINE 1.0 APPLICATION Synergic MIG / MAG welding machine will be used for spatter free and heavy duty welding of Carbon Steel, Alloy Steel, Stainless Steel,

More information

SC351. Model: SC351 NIL. Part List US-English

SC351. Model: SC351 NIL. Part List US-English Model: NIL Part List US-English Table of Contents GENERAL VIEW 3 COVER AND TANKS 5 FRAME SYST 7 HANDLE SUPPORT SYST 9 HANDLE SYST 12 MOTOR AND DECK SYST 15 BRUSH DECK SYST 17 ACCESSORIES 19 WIRING DIAGRAM

More information

Common Components for: (Procenter / Elevance / Elevance Continental-Style / International (Whip) Delivery Systems)

Common Components for: (Procenter / Elevance / Elevance Continental-Style / International (Whip) Delivery Systems) Common Components for: (Procenter / Elevance / Elevance Continental-Style / International (Whip) Delivery Systems) Connectors & Plugs Umbilicals Common Tubing Handpiece Tubing Index for Procenter Units

More information

ILLUMINATION OPTIONS PANEL & C. 3.0max. page 66. page 66. page 66. page 66 0.8-1.6. page 66 0.8-3.0. page 66

ILLUMINATION OPTIONS PANEL & C. 3.0max. page 66. page 66. page 66. page 66 0.8-1.6. page 66 0.8-3.0. page 66 Colours and voltages: Neon Available with Red, Amber, Green or Clear lenses 00/30V (marked 0V), 200/250V (marked 230V) ED - Red, Yellow, Green, Blue, hite /2.2V Resistors for other voltages available.

More information

VE17 DSP. Model: VE-17DS. Lista Części Polish

VE17 DSP. Model: VE-17DS. Lista Części Polish Model: VE-17DS Lista Części Polish Spis Treści Handle 3 Base 5 Wiring - Wear and Tear parts 7 DF100-A Foam Generator art no. 50000055 9 Handle VE02 3 Handle VE02 4 Poz Numer katalogowy Iloś Opis 1 VF40104EU

More information

Transport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com.

Transport & Automotive CATALOGUE. March 2011. Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au. www.tubefit.com. Transport & Automotive CATALOGUE Customer Service Phone: 1800 777 299 Fax: 1800 065 321 Email:sales@tubefit.com.au March 2011 www.tubefit.com.au Page 1 4 6 9 12 14 16 17 19 20 22 23 24 26 28 29 31 33 Index

More information

Kempact 251R, 253R, 323R, 181A, 251A, 253A, 323A, 253RMV, 253AMV, 323RMV, 323AMV EN DA DE ES FI FR IT NL NO PL PT RU SV ZH.

Kempact 251R, 253R, 323R, 181A, 251A, 253A, 323A, 253RMV, 253AMV, 323RMV, 323AMV EN DA DE ES FI FR IT NL NO PL PT RU SV ZH. Kempact 251R, 253R, 323R, 181A, 251A, 253A, 323A, 253RMV, 253AMV, 323RMV, 323AMV Operating manual Bruksanvisning Gebrauchsanweisung Manual de instrucciones Käyttöohje Manuel d utilisation Manuale d uso

More information

ATTIX 350, 360, 8 GALLON

ATTIX 350, 360, 8 GALLON Model: ATTIX 350-01 ATTIX 360-11 ATTIX 360-21 Part List English Table of Contents Cabinet 350-01, 8 GALLON 3 Cabinet 360-11, -21, 8 GALLON AS/E 5 Motor/ Filter 7 Container 9 Accessories 350 / 360 11 Accessories

More information

POSEIDON 2-29, 2-25 & 2-22 POSEIDON 2-29, 2-25 & 2-22 XT

POSEIDON 2-29, 2-25 & 2-22 POSEIDON 2-29, 2-25 & 2-22 XT POSEION 2-29, 2-25 & 2-22 POSEION 2-29, 2-25 & 2-22 XT Repair Manual Index A. Safety precautions 3 B. Technical data 4 C. Structure 5-6. Service / Repair 7-23 E. Tools 24 F. Function 25-26 G. Electric

More information

- power windows - alarm system - electric door mirror control - door warning light - central locking - seat memory

- power windows - alarm system - electric door mirror control - door warning light - central locking - seat memory Door Wiring Harness Plug Connections Binder -, Electrics Vehicle Type: (86) Model Year: 7 (V) Concern: Door wiring harness plug connections X11 / X12. Information: The rubber boot for the door connector

More information

Before installation it is important to know what parts you have and what the capabilities of these parts are.

Before installation it is important to know what parts you have and what the capabilities of these parts are. INSTALLATION GUIDE Before installation it is important to know what parts you have and what the capabilities of these parts are. The Recon XZT is the smallest and most powerful gauge of its kind. With

More information

STUD WELDING EQUIPMENT & ACCESSORIES CATALOG

STUD WELDING EQUIPMENT & ACCESSORIES CATALOG STUD WELDING EQUIPMENT & ACCESSORIES CATALOG WWW.PROWELDINTERNATIONAL.COM 129 COMMERCE DR LAGRANGE, OH. 44050 PHONE: (440)-355-6064 FAX: (440)-355-6474 07/01/02 CD WELDING SYSTEMS PART # LIST PRICE CD-212

More information

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves

4. Combi valves. 7. Fire hydrants. 8. Check valves. 9. Air valves 1. General company and product information 2. Flanged gate valves for water 3. Other gate valves for water 4. Combi valves 5. Service connection valves for water 6. Valves and fittings for gas 7. Fire

More information

OPERATING MANUAL. BAK Thermoplastic Welding Technology AG 1

OPERATING MANUAL. BAK Thermoplastic Welding Technology AG 1 OPERATING MANUAL BAK Thermoplastic Welding Technology AG 1 SAFETY Danger to life Unplug the tool before opening it as live components and connections are exposed. Danger of fire and explosion in case of

More information

BAND HEATERS. component parts

BAND HEATERS. component parts BAND HEATERS BAND HEATERS OVERVIEW WATTCO band heaters are the ideal solution for high watt densities and high operating temperature applications, especially for the plastics industry. The various types

More information

ReachFree ID Installation Instructions For Portal TI, Sentinel and C-Start. Unitec www.startwithunitec.com

ReachFree ID Installation Instructions For Portal TI, Sentinel and C-Start. Unitec www.startwithunitec.com ReachFree ID Installation Instructions For Portal TI, Sentinel and C-Start Unitec www.startwithunitec.com Proprietary Information and Materials of Unitec, Inc. Such proprietary information and materials

More information

INSTRUCTIONS FOR. Models: Supermig185 195/9. 0051 (2) 180900 SUPERMIG

INSTRUCTIONS FOR. Models: Supermig185 195/9. 0051 (2) 180900 SUPERMIG SUPERMIG INSTRUCTIONS FOR SUPERMIG WELDER Models: S U P E R M I G 185 S U P E R M I G 1 9 5/9 Supermig185 195/9. 0051 (2) 180900 p s SUPERMIG185, SUPERMIG195/9, Thank you for purchasing a Sealey Welder.

More information

Introduction to Fiber Optic Cables. Photoelectric Sensors. 2Photoelectric Sensors, Standard Sensors, Fiber optic cables. Please Note!

Introduction to Fiber Optic Cables. Photoelectric Sensors. 2Photoelectric Sensors, Standard Sensors, Fiber optic cables. Please Note! Photoelectric, Standard, optic cables Photoelectric Introduction to Optic s Optic Diffuse and Thru-Beam Mode In applications involving small targets or unfavorable conditions, fiber optic cables may be

More information

TRAILER CONNECTORS W I R I N G D I A G R A M S 2 3 4 S M A L L R O U N D C O N N E C T O R S 2 3 5 F L AT C O N N E C T O R S 2 3 6

TRAILER CONNECTORS W I R I N G D I A G R A M S 2 3 4 S M A L L R O U N D C O N N E C T O R S 2 3 5 F L AT C O N N E C T O R S 2 3 6 TRAILER CONNECTORS & SUZI COILS W I R I N G D I A G R A M S 4 S M A L L R O U N D C O N N E C T O R S F L AT C O N N E C T O R S L A R G E R O U N D C O N N E C T O R S 8 A D A P T O R S 9 H E A V Y -

More information

TW 300 S, TW 300 CAR, HOME CLEANER

TW 300 S, TW 300 CAR, HOME CLEANER Model: HOME CLEANER TW 300 TW 300 CAR Stykliste Dansk Indholdsfortegnelse HOME CLEANER - Tube, hose and lever 3 HOME CLEANER - Nozzles and bag 5 Cabinet 7 Vac motor 9 Carpet adaptor 11 Hand adaptor 13

More information

PARTS MANUAL EH12-2 ENGINE. Model. PUB-EP5713 Rev. 7/99

PARTS MANUAL EH12-2 ENGINE. Model. PUB-EP5713 Rev. 7/99 PARTS MANUAL Model EH12-2 ENGINE PUB-EP5713 Rev. 7/99 940 Lively Blvd. Wood Dale, IL 60191 Phone: 630-350-8200 Fax: 630-350-8212 e-mail: sales@robinamerica.com www.robinamerica.com Copyright 1999 Robin

More information

THE OLDAKER DIFFERENCE.

THE OLDAKER DIFFERENCE. THE OLDAKER DIFFERENCE. 506 THE NEEDLE TIP SAFETY SERIES THE REPLACEMENT SAFETY SERIES TAPERED STRAIN RELIEF NICKLE PLATED THREADED BRASS TIP MOLDED FLAME RETARDANT WITH SAFETY RING HEAVY DUTY WIRE 20,000

More information

79-93 HEAT. Hellion Power Systems 79-93 HeaT Kit Instructions

79-93 HEAT. Hellion Power Systems 79-93 HeaT Kit Instructions 79-93 HEAT Hellion Power Systems 79-93 HeaT Kit Instructions Hellion Power Systems 86-93 Turbocharger System Instalation Instructions Oil drain First steps 1. If you plan on replacing fuel pump, make sure

More information

Contents. Description Page Description Page

Contents. Description Page Description Page Contents Description Page Description Page Auger Housing Assembly 1 Muffler 18 Handle and Control Assembly 3 Fuel Tank r Assembly 19 Engine and Drive Assembly 5 Clutch Retarder 20 Cylinder Head 7 Retarder

More information

The Z-Bot Power Draw Bar

The Z-Bot Power Draw Bar The premier source of tooling, parts, and accessories for bench top machinists. The Z-Bot Power Draw Bar The Z-bot Power Draw Bar for mini mills is designed to work with the popular Tormach tooling system.

More information

Please read operating instructions carefully before use and keep for further reference.

Please read operating instructions carefully before use and keep for further reference. GB OPERATING INSTRUCTIONS LEISTER Welding-Pen R Hot air tool Please read operating instructions carefully before use and keep for further reference. APPLICATION The LEISTER Welding-Pen R is a hot air tool

More information

Centricut plasma torches and consumables for Whitney

Centricut plasma torches and consumables for Whitney plasma torches and consumables for Whitney Contents Plasma Product is available for the following major OEM brands AMADA ESAB Kaliburn KJELLBERG KOIKE KOMATSU LINCOLN THERMAL DYNAMICS WHITNEY WIEDEMANN

More information

TECHNICAL INFORMATION

TECHNICAL INFORMATION TECHNICAL INFORMATION Models No. Description GN900 Cordless Clipped Head Framing Nailer CONCEPT AND MAIN APPLICATIONS Model GN900 is a cordless clipped head nailer developed for a wide range of framing

More information

209 216 218 217 213 218 207 208 213 R+M

209 216 218 217 213 218 207 208 213 R+M Spray guns 09 Create your individual Suttner spray gun 214 Create your individual Suttner vented handle 215 easyfarm365+ 193 easywash365+ handles by Suttner 212 easywash365+ lance swivels ST-345 by Suttner

More information

Arecont Vision H.264 Color or Day/Night SurroundVideo Series Installation Manual

Arecont Vision H.264 Color or Day/Night SurroundVideo Series Installation Manual 0 P a g e H.264 Color or Day/Night SurroundVideo Installation Manual Inside the box: A. Arecont Vision SurroundVideo camera B. Mounting template C. RJ45 female to female coupler D. Hex key E. Security

More information

SPARE PARTS LIST April 2005

SPARE PARTS LIST April 2005 MSP1000 Motor and pump SAM420 MSP1001 0-760mmHg Vacuum gauge MSP1002 24 Disposable bacterial Filters MSP1003 24 Disposable Hydrophobic Filters MSP1004 Pack 10 yellow vacuum connectors MSP1005 Vacuum control

More information

1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45

1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431

More information

RICAMBI FLECK WATERBOOK 2006-2007 - LISTINO GENERALE

RICAMBI FLECK WATERBOOK 2006-2007 - LISTINO GENERALE RICAMBI FLECK P/N 0 O'ring 560 CD 0 P/N 050 Grommet pass rod 20 2300/230/ 2350 P/N 060 Tube 3/8in (0,92 m) 0 P/N 086 Holding Nut M5 2300 0 P/N 0209-0 Quad Ring 560 CD 0 P/N 028 Microswitch 5 P/N 0220 Screw

More information

Technical drawings and specifications are available for these connectors. Please ask your Calrad sales representative for details.

Technical drawings and specifications are available for these connectors. Please ask your Calrad sales representative for details. 30-395 Open Circuit. 30-396 Closed Circuit. 2-Conductor 1/4 Phone Jack. 3/8 bushing. Mounts in.355 hole. 30-397 1 4" Phone Jack. Open Circuit 3-Conductor. 3/8" bushing. Mounts in.355 hole. 30-398 1 4"

More information

Machine needle shut-off nozzle type-a

Machine needle shut-off nozzle type-a Machine needle shut-off nozzle type-a spring operated Applications: Thermoplastics (not applicable for PVC) Shut-off mechanism: Operated with one axial high performance spring Index of contents Chapter

More information

Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge!

Parts Manual. TWIN 2 & 3 Parts & Accessories F210846R01. Your efficiency is our Challenge! Parts Manual TWIN 2 & 3 Parts & Accessories F210846R01 Your efficiency is our Challenge! All rights reserved. No part of this manual may be copied and/or published by means of printing, photocopying, microfilm

More information

RESERVDELSLISTA NORMFINISH DP14

RESERVDELSLISTA NORMFINISH DP14 1-A Glove L with lining 401100 1 pc 1-B Door L complete 400600 1 pc 1-C Main switch O-I 400101 1 pc 1-D START / STOP switch 400301 1 pc 1-E Fan motor 1,5 kw 400200 1 pc 1-F Gauge blast pressure 400400

More information

TOP AND CABINET PARTS

TOP AND CABINET PARTS TOP AND CABINET PARTS AUTOMATIC WASHER 9 06 Printed in U.S.A. (drd) 1 Part No. Rev. A TOP AND CABINET PARTS 1 Literature Parts 8182271 Use & Care Guide 8182277 Tech Sheet 8182614 Energy Guide 8182196 Quick

More information

Directory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02.

Directory chapter 02 - DIN Power (to 6 A) Types D, E, F, FM, 2F, F9, interface connectors I/U 02. 01. Technical characteristics types D and E... 02. Directory chapter 02 - () Types D, E, F, FM, 2F, F9, interface connectors I/U Page Technical characteristics types D and E.............................. 02.10 Type D connectors.................... 02.11

More information

ASSEMBLY MANUAL MATERIA 101. Revision 04

ASSEMBLY MANUAL MATERIA 101. Revision 04 ASSEMBLY MANUAL MATERIA 101 Revision 04 24 NOVEMBER 2014 00 INDEX 03 01 - Introduction 42 08 - Board wiring 05 06 07 07 07 08 02 - KIT Contents Parts list Box A Box B Box C Notes 46 49 09 - Calibration

More information

Document number RS-PRD-00130 Revision 05 Date 20/10/2009 Page 1/30

Document number RS-PRD-00130 Revision 05 Date 20/10/2009 Page 1/30 Date 20/10/2009 Page 1/30 1. Purpose This document describes the field replacement of the footscan plate cable for these models: 2m hi-end plate SN 11/5/xxx 2m pro plate SN 7/5/xxx 0.5m 2003 hi-end plate

More information

SERVICE SERVICE COMPACT MANUAL. Mod. 3000 92X Mod. 3000 93X Mod. 3000 94X. Part 2

SERVICE SERVICE COMPACT MANUAL. Mod. 3000 92X Mod. 3000 93X Mod. 3000 94X. Part 2 SERVICE COMPACT SERVICE 000 MANUAL Mod. 000 9X Mod. 000 9X Mod. 000 94X Part Forward This Service Handbook is intended to assist with servicing and fault-finding in Caravans and Motor Caravans equipped

More information

Parts and Accessories Installation Instructions

Parts and Accessories Installation Instructions Parts and Accessories Installation Instructions INFO 1 4 2 5 3 6 TONE SELET FM AM MODE MENU F 38 393 B Retrofit Kit On-board Monitor and Navigation System BMW 7 Series (E 38) These installation instructions

More information

Part Name/Description Part Number Quantity. Power Cable 4000950-5 1

Part Name/Description Part Number Quantity. Power Cable 4000950-5 1 Note: Indented items indicate parts included in an assembly listed above Part Name/Description Part Number Quantity Power Cable 4000950-5 1 Raven Harness Adapter Kit 4100525 1 Installation Instructions

More information

DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51

DR90. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 DR90 Toll Free: 888-863-2252 PART NUMBERS AND PRICES ARE SUBJECT TO CHANGE 1 of 51 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR90-001 842645048166 CYLINDER 1 1 2 DR90-002

More information

CHAPTER 5 PARTS. This chapter describes assemblies / subassemblies / parts considered replaceable at on-site field installation.

CHAPTER 5 PARTS. This chapter describes assemblies / subassemblies / parts considered replaceable at on-site field installation. CHAPTER 5 PARTS PARTS BY PICTORIAL This chapter describes assemblies / subassemblies / parts considered replaceable at on-site field installation. NOTE: The following is a breakdown description of the

More information

HIGH SPEED SPINDLE MOTORS

HIGH SPEED SPINDLE MOTORS DATA SHEET HM / HT and ES Ranges HIGH SPEED SPINDLE MOTORS Manual and Automatic Tool Change Compact, high speed, asynchronous motors with power ratings from 0.65 to 18 designed to provide long term reliability

More information

SAFETY VALVES SERIES 3030 EC Marking in conformity with 97/23/EC Directive (PED)

SAFETY VALVES SERIES 3030 EC Marking in conformity with 97/23/EC Directive (PED) SAFETY VALVES SERIES 3030 EC Marking in conformity with 97/23/EC Directive (PED) GENERAL DESCRIPTION Valves series 3030 are safety devices according to the definition given in Article 1, Point 2.1.3, 2

More information

Pipe Clamps and Accessories

Pipe Clamps and Accessories Products 4.0 Products 4.1 Connection options to pipe clamps with Triple-Thread Connector NT 3G (M16, M10, M8) 4.2 Connection options to pipe clamps with Triple-Thread Connector NT 3G (3/8", M12, M10) 4.3

More information

Operating Instructions for Plastic Flow Meter. Model: KSK

Operating Instructions for Plastic Flow Meter. Model: KSK Operating Instructions for Plastic Flow Meter Model: KSK 1. Contents 1. Contents... 2 2. Note... 3 3. Instrument Inspection... 3 4. Regulation Use... 3 5. Operating Principle... 4 6. Mechanical Connection...

More information

Extrusion Tooling Cleaning Procedure Manual

Extrusion Tooling Cleaning Procedure Manual Plastic Extrusion Tooling Specialists ph: 800.272.8878 Extrusion Tooling Cleaning Procedure Manual B&H TOOL COMPANY FIRST IN EXTRUSION TOOLING 285 Pawnee Street San Marcos, CA 92078 ph: 800.272.8878 fax:

More information