National Quality Supervision and Test Center for Furniture (Guangdong) Test Report

Size: px
Start display at page:

Download "National Quality Supervision and Test Center for Furniture (Guangdong) Test Report"

Transcription

1 National Quality Supervision and Test Center for Furniture (Guangdong) Page 1 of 6 Sample Description Sofa Manufactured Date Trademark Voucher No. Q Inspected Entity Bai Lai Mei Furniture Factory, Shunde District, Test Type Sampling test Longjiang Township, Foshan City Applicant Bai Lai Mei Furniture Factory, Shunde District, Sample Quantity 1 piece Longjiang Township, Foshan City Manufacturer Bai Lai Mei Furniture Sampling Base 30 pieces Factory, Shunde District, Longjiang Township, Foshan City Sampling Place The Warehouse of the Factory Sampling Date April 20,2010 Sampling Entity National Quality Supervision and Test Center for Furniture (Guangdong) Tested Date May 18, 2010 Sample character and State Ref. Documents for the Test Test Conclusion: Good QB/T <<Soft furniture, Sofa>> (qualified product) 18 items were tested in this sampling test. All tested items were found to meet the requir of the standards. Issued by National Quality Supervision and Test Center for Furniture (Guangdong) (Stamped) Remarks No copy of this report is valid without original red stamp of testing body. The annual equilibrium moisture content(emc)in the area where the product is produced (Guangdong) is 15.9%. Approved by Zhang Lingqi Checked by Jianhua He Tested by Jie Li Desheng East Road, Daliang New Urban Area, Shunde District, Foshan City, Guangdong Province Tel: Fax: Website:

2 National Quality Supervision and Test Center for Furniture (Guangdong) Page 2 of 6 Serial No. Tested Item Requir by the Standards Unit Type of item Test result Conclusi on 1 Main Single: 480 mm Basic 560 dimensions Width of front part Double: of seat Triple: Depth of seat: Basic 550 Height of front part of seat: general 428 Height of backrest: 600 general Shape symry Seat surface symry Diagonal length(distance) 1000; allowable differential value 8 Diagonal length(distance) >1000; allowable differential value 10 mm general Backrest symry Symry of same type of armrest Diagonal length(distance) 1000; allowable differential value 8 Diagonal length(distance) >1000; allowable differential value 10 Diagonal length(distance) 1000; allowable differential value 8 Diagonal length(distance) >1000; allowable differential value qualified peripheral symry difference in thickness Foot stability Deviation of Unevenness(non-planeness) of sofa feet in contact with ground surface 2.0 mm General 0.60 qualified 4 Internal wooden part requirement s 1) Timber with insect erosion (encroachment) should not be used to create internal wooden parts. 2) any wooden part should not have a mildly decayed sections more than 15% of its surface area. 3) When the depth of decay is larger than 25% of the thickness of the material, that material should not be used to create internal wooden parts. 4) Degree of the natural twill on the pressure position should not be more than 20%. 5) -eme nts qualified

3 5 External wooden part requirement s Timber with mild cracks and knots will affect the strength of the structure, hence should not be used. 6) Timber with tree skin should not be used. The species of the wood used should actually be the same as indicated on the labels. For the materials used in exterior wooden parts: 1) Timber of coniferous trees and broad leaf species should not be used together on glue-joint materials. 2) The color and texture of the wooden materials used should be similar. Materials with the following defects should not be used to create exterior wooden parts: 1) wood materials with throughput cracks 2) wood materials with insect erosions. 3) decayed wood materials 4) wood materials with dead knots 5) wood materials with resin cysts. 6)degummed artificial board. 1) The width of knot should not be more than 1/3 of the width of the material. 2) The diaer of the knot should not be more than 12 mm. 3) The degree of the natural twill on the pressure positions should not be more than 20%. Front view should not reveal any 1) cracks 2) lack of edge. The cracks and lack of edge should be repaired on the side view Basic general* Basic Basic Basic general Desheng East Road, Daliang New Urban Area, Shunde District, Foshan City, Guangdong Province Tel: Fax: Website:

4 National Quality Supervision and Test Center for Furniture (Guangdong) Page 3 of 6 Serial Tested Item Requir by the Standards Unit Type of Test Conclusion No. item result 6 Timber The moisture content of the wooden % Basic 14.4 moisture content materials used in the product should not be larger than the annual equilibrium moisture content (EMC)in the area where the product is produced( which is 15.9% in Guangdong area) 7 Safety and hygienic requiremen ts for bedding materials Bedding materials such as common hemp felt (cloth), palm felt, cotton felt, cotton (or chemical) wadding: 1) should be dry; 2) should not be decayed and should not have a stinky odor; 3) should not have such impurities as dirt, sands and al materials inside; 4) should not have visible health hazards such as Arthropoda and cockroach eggs Basic Requir 8 Requireme nts for foamed plastics Apparent Density (Volume) rebound resilience Seat surface: 25 Kg /cubic re Class C 35 % Classifie d Basic compression permanent deformation(ten sion test) Class C 10.0 % Classifie d Requireme nts of surface materials The rubbing fastness on the color of leather The rubbing fastness on the color of textile products The rubbing fastness on the color of artificial leather Dry friction 4 Class Basic Dry friction Moist friction Dry friction 4 Moist friction Adhesive 2.5 N/10mm Basic fastness of the leather coating 10 Wooden Parts made of artificial boards should Basic

5 part requiremen ts 11 Requireme nts for the appearance of surface materials have edge banding (encapsulating), which should be smooth and should not have any degumming(adhesive failure). The exterior wooden pieces should be smooth and even, without any 1) dent, 2) shecter lines, 3) timber crumble, 4) against grain(cross grain), and 5) groove. 1) The exterior wooden pieces should be evenly chamfered; 2) The round angles and arcs of the exterior wooden pieces should be even and symrical; 3) The exterior wooden pieces should be well-shaped and smooth. The exterior wooden pieces should have a good workmanship, and 1) should be symrical as designed; 2) should have no defects such as tool marks and sanding marks. The interior wooden pieces should be processed with planning and grossly polished general* general* general* general Requir The surface materials should look clean Basic Requir On the textile materials: 1) fuzzes should be to the same direction on the same section of the suede; 2) There should be no significant difference in color; 3) There should be no flaw general* The leather and artificial leather surface materials should have: 1) no apparent difference in color, 2) no cracks, and 3) no damage Basic Requir Desheng East Road, Daliang New Urban Area, Shunde District, Foshan City, Guangdong Province Tel: Fax: Website:

6 National Quality Supervision and Test Center for Furniture (Guangdong) Page 4 of 6 Serial Tested Item Requir by the Standards Unit Type of Test Conclusion No. item result 12 Requir Sewing threads on the surface should general* Requir for sewing and coating not have any 1) slip stitch and float stitch, and 2) broken and loose stitch. No loose end of thread should be found. Embedded threads should be smooth general and straight, and even and symrical at the arcs. 1) The exterior clinch nails should be in a well-aligned manner, with a balanced distance in between. 2) The clinch nails should not be loose and falling-off. 3) The clinch nails should not have been hammered too flatly and their paint shouldn t be peeling general* ) The coating of the surface should be general* Requir smooth and without wrinkles. 2) The coating of surface should have even tightness, without apparent slacking. 3) The intended wrinkles for artistic appealing should be symrical and even. 13 Sound of friction 14 Safety requir 15 Requir for exterior al parts Pressing with fingers on the seat surface and the backrest should not result in any unusual noise of friction and crash between the al parts There should not be any sharp al parts piercing out of the seat surface and backrest surface in normal use. There should be no cutting edge and burrs in the spaces between the seat surface and the armrests or the backrest. External al parts should have no cutting edge and burrs. Ovality(out-of -roundness) If the diaer of the al pipes at the bending locations is 25, the allowance for Ovality is 2.0. mm general

7 16 Requir for the appearance of decorative surface If the diaer of the al pipes at the bending locations is >25, the allowance for Ovality is 2.5 The arcs in the bending locations should be smooth and consistent. The riveting points of al parts should be well-shaped and smooth, without any apparent hammer marks. There should not be any slip riveting or loose riveting. The welded locations of al parts should not have any 1) slag 2) blow hole(pore), 3) overlapped welding beading, 4) visible welding wire stick tip, 5) biting edge and splash, 6) al run-out/ burn-off. The visible seams of al tubes should have 1) no crack and incomplete/missing welding, and 2) no apparent overlapping of welds. The welded points of al parts should not have 1) incomplete and 2) missing welding. The coating of baking varnish and plastic spraying should not have 1) apparent sagging, 2) roughness and bump, 3) wrinkle and 4) overspray. Electroplated coating should not have and 1) burn mark, 2) pin-hole, 3) scratch, and 4) burr. Decorative surface of coating should have no apparent difference in color, no crack and no peeling-off. The electroplate coating should not have insufficient coverage or rust general general basic general* Requir basic general* general* Requir Desheng East Road, Daliang New Urban Area, Shunde District, Foshan City, Guangdong Province Tel: Fax: Website:

8 National Quality Supervision and Test Center for Furniture (Guangdong) Page 5 of 6 Serial Tested Item Requir by the Standards Unit Type of Test Conclusion No. item result 16 Requir The coating of paint should have no general* for the appearance of decorative surface 1)apparent sags, 2) pin-holes, 3) wrinkling and inflation, 4) dust deposits and granules of impurity, 5) apparent defects such as brush marks, 6) apparent difference in color. The coating of paint (lacquer) film basic should have no 1) insufficient coverage, 2) apparent bubbles, 3) peeling and cracks. 17 Requir Metal accessories should fit each general Requir for al part other, and be installed tightly. installation 18 Anti-stain requirement 19 Mechanical Properties No bolt is missing to the anchoring spurs (except the optional/alternative holes). Connecting screws/parts should not be missing general Requir Movable parts should move easily general Internal accessories such as al components and all types Metal parts should have been processed with a high degree of anti-rust treatment. of springs The durability of sofa seat and backrest Metal parts should have no rust Class C requir should be. The test should reveal that: The surface material of the sofa seat and backrest should be intact. The seams should have no cracks and loose threads. The cushioning material should not be general Requir Classified Require ments

9 dislocated or damaged. The springs should not be lean, loose and broken. The elastic webbing should not be broken and damaged. The frame should not have any permanent loosing or breakage. The relaxing amount of backrest The residual relaxing amount of backrest The relaxing amount of armrests The residual relaxing amount of armrests Amount of compression 2 º general º general 0.2 Single 20 general mm Multiple (including double) 20 Single sofa 10 mm general Multiple (including double) 5 a 55 mm general 75.0 C Desheng East Road, Daliang New Urban Area, Shunde District, Foshan City, Guangdong Province Tel: Fax: Website:

10 National Quality Supervision and Test Center for Furniture Applicant s Address 9 Shalong Road Xiantang Village, Longjiang Township, Shunde District, Foshan City (Guangdong) Address where tests were conducted ( if different to this lab) Page 6 of 6 Description of tested sample snake springs, elastic bandages, al feet, artificial leather surface coating A description of the sampling procedure A description of the use of non-standard hods Exceptions, supplement to Deviations Test result and assessment by classification Test environment and status Sub-contracted items and the subcontractor Notes Comments and explanations Desheng East Road, Daliang New Urban Area, Shunde District, Foshan City, Guangdong Province Tel: Fax: Website:

11 Logos of : MA Z Ilac-MRA CNAS Test CNAS L0153 AL (2009) State Verification Supervision # (298) Sample Distribution: Sofa Inspected Entity: Test Type: Bai Lai Mei Furniture Factory, Shunde District, Longjiang Township, Foshan City Sampling National Quality Supervision and Test Center for Furniture (Guangdong) 05/18/1010

12 Plant quarantine certificate (out of province) Lin ( ) Test # No Shipping Xiaojun Liu (Tianmen, Hubei) unit and address Undertaker Xiaojun Liu ID numnber Phone Receiver Shunde, Guangdong and address Origin of plant or plant product Validation period Name of plant or plant product ChinaWingnut (It is intentionally kept blank below ) Tianmen Municipality, Hubei Province Via to Shunde District, Foshan City, Guangdong Province From June 30, 2010 to July 3, 2010 Name of product (or Type of materials) Wooden boards Specifications Unit Amount Notes Cubic ers 60.8 Comments: No harmful living things were found in the above listed plant or plant product to be shipped, as specified by the Quarantine Requir for the Forestry Industry of both the province where the product is originated, and the province of destination, and the Supplemental Requir for Quarantine for the Forestry Industry by the Province of destination. The product is hereby approved for inter-province shipment. Requesting Agency: The Quarantine Station for the Prevention and Treatment of Forest Pests and Diseases, Hubei Province (Stamp ) Signing agency: The Quarantine Station for the Prevention and Treatment of Forest Pests and Diseases, Tianmen Municipality, Hubei Province (Stamp ) By: the signature of quarantine specialist Note: This certificate is void without the stamp of the Provincial Plant Quarantine Agency of the province where the product is originated (or the stamp of the local Plant Quarantine Agency which conducts the quarantine as sub-contracted by the provincial plant quarantine agency), and the signature of the quarantine specialist. 2. This certificate will be void if transferred, changed and repeatedly used. 3) Each carrying lorry( ship) should have a certificate, which will be valid throughout the trip.

Surface Decoration. Design techniques used to put on the surface of the pottery. Slip Oxides Glaze Embossed Incised Wax on wet Altered from the wheel

Surface Decoration. Design techniques used to put on the surface of the pottery. Slip Oxides Glaze Embossed Incised Wax on wet Altered from the wheel Surface Decoration Design techniques used to put on the surface of the pottery. Slip Oxides Glaze Embossed Incised Wax on wet Altered from the wheel Slip How to apply slip Colored slip is intended to add

More information

SPECIFICATION Aluminum Module Frames. Allowed anodization before fabrication for clear frames.

SPECIFICATION Aluminum Module Frames. Allowed anodization before fabrication for clear frames. SPECIFICATION Allowed anodization before fabrication for clear frames. Page 2 of 9 1. SCOPE 1.1. This document provides general requirements for aluminum frames used in the assembly of photovoltaic modules.

More information

GENERAL TRADING TERMS (GTT) RMC by EUROSURFACES

GENERAL TRADING TERMS (GTT) RMC by EUROSURFACES GENERAL TRADING TERMS (GTT) RMC by EUROSURFACES PART I GENERAL COMMERCIAL CONDITIONS FOR THE SALE OF AGGLOMERATED STONE RMC by EUROSURFACES Manufacturer: Product Brand: EUROSURFACES PORTUGAL S.A. RMC Rua

More information

Replacement Window Installation Guide Non-Impact & Impact Resistant Windows without Nailing Fin

Replacement Window Installation Guide Non-Impact & Impact Resistant Windows without Nailing Fin Replacement Window Installation Guide Non-Impact & Impact Resistant Windows without Nailing Fin americancraftsmanwindows.com Project Requirements: Failure to follow these instructions may void product

More information

Euro Oak Installation

Euro Oak Installation STYLE TIMBER FLOOR Bring your life in style Euro Oak Installation Before Starting Installation Your floor has been manufactured with the best possible care. However we would still advise you to check the

More information

SCENIC VIEW SV 10 SECTION 08 87 13 SOLAR CONTROL FILMS

SCENIC VIEW SV 10 SECTION 08 87 13 SOLAR CONTROL FILMS PART 1 GENERAL SCENIC VIEW SV 10 SECTION 08 87 13 SOLAR CONTROL FILMS 1.1 SUMMARY A. Optically clear dual reflective, neutral sputtered and aluminum metallized polyester film for solar control. 1.2 RELATED

More information

The Manitoba Water Services Board SECTION 027110 Standard Construction Specifications September 2013 Page 1 of 12

The Manitoba Water Services Board SECTION 027110 Standard Construction Specifications September 2013 Page 1 of 12 September 2013 Page 1 of 12 Part 1 General 1.1 DESCRIPTION OF WORK.1 The work shall consist of the supply and construction of a chain link fence, barb wire fences or mesh fences as shown on the Plans or

More information

SEWING MAINTENANCE CHECKLIST

SEWING MAINTENANCE CHECKLIST SEWING MAINTENANCE CHECKLIST Many Retail, Brand-name Marketing, Mail Order and Sourcing Companies are visiting existing and potential Contractor sewing facilities and evaluating their sewing capabilities

More information

Basement Window Installation Guide Hopper and Sliding

Basement Window Installation Guide Hopper and Sliding Basement Window Installation Guide Hopper and Sliding americancraftsmanwindows.com Project Requirements: Installation must comply with all applicable building codes. Existing window frame, wall and weatherresistant

More information

INSTALLATION INSTRUCTIONS for Vinyl Windows with Integral Nailing Fin (JII001)

INSTALLATION INSTRUCTIONS for Vinyl Windows with Integral Nailing Fin (JII001) Thank you for selecting JELD-WEN products. Attached are JELD-WEN s recommended installation instructions for Vinyl windows with an integral nailing fin. While the use of these installation instructions

More information

How to Build Your Own CornHole Game

How to Build Your Own CornHole Game How to Build Your Own CornHole Game DIMENSIONS Here is a diagram with the basic measurements for the Cornhole board game. SUPPLIES 1/2 thick sheet of plywood one 4 x4 or two 2 x4 s 8 long 2 4 s (4) 4 1/2

More information

Minor Cracks in Horizontal Surfaces

Minor Cracks in Horizontal Surfaces Cracks, chips and broken or flaking areas in concrete are not only unsightly, they can lead to further deterioration of the surface. The result is a costly replacement project as opposed to a simple repair.

More information

Grand Mesa Plus LAMINATE - WIRE BRUSHED. GAGVGM81012A Prairie. GAGVGM80012NA Colorado. GAGVGM84012A Pecan Rustic. GAGVGM85012A Saddle Walnut

Grand Mesa Plus LAMINATE - WIRE BRUSHED. GAGVGM81012A Prairie. GAGVGM80012NA Colorado. GAGVGM84012A Pecan Rustic. GAGVGM85012A Saddle Walnut MARCH 2015 Grand Mesa Plus LAMINATE - WIRE BRUSHED Specifications 12.3mm 6.5 wide x 47-13/16 long 19.42 sf/ctn 48 ctn/plt Triple Plate Embossing Wire Brushed Texture Micro-Bevel & Waxed Edges Warranty

More information

07 21 19 Guide Specification STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM

07 21 19 Guide Specification STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM 07 21 19 STAYFLEX CORROSION CONTROL AND THERMAL INSULATION SYSTEM 7819 Broadview Road Cleveland, OH 44131 800-522-4522 February, 2011 SPEC NOTE: This guide specification is intended for use when specifying

More information

Designed for comfort and built to last.

Designed for comfort and built to last. Designed for comfort and built to last. Inter IKEA Systems B.V. 2015 Whether we work in an office or at home, many of us spend the majority of the day at a desk. A comfortable workspace is therefore essential

More information

Mold Preventing I nterior System

Mold Preventing I nterior System interior insulation and renovation boards A system of components that have been designed to work perfectly together to repair damage caused by mold. The system consists of boards, insulation wedges, reveal

More information

How to Install Hardwood Flooring Over a Sub Floor

How to Install Hardwood Flooring Over a Sub Floor How to Install Hardwood Flooring Over a Sub Floor Installation Preparation Instructions Read the entire instructions before starting your project. 1) INSPECT EACH PLANK (see fig. a) Wood is a natural product

More information

Sun Windows General Information Sun New Construction Window Installation Instructions

Sun Windows General Information Sun New Construction Window Installation Instructions Sun Windows General Information Section 1 G F H H H A. Apply Weather Resistive Barrier B. Apply Sill Flashing Tape C. Place Waterproof Sill Shims D. Caulk Back of Nail Fin Sides & Top, Set Window, Fasten

More information

NAPCA BULLETIN 18-99 APPLICATION PROCEDURES FOR CONCRETE WEIGHT COATING APPLIED BY THE COMPRESSION METHOD TO STEEL PIPE

NAPCA BULLETIN 18-99 APPLICATION PROCEDURES FOR CONCRETE WEIGHT COATING APPLIED BY THE COMPRESSION METHOD TO STEEL PIPE NAPCA BULLETIN 18-99 APPLICATION PROCEDURES FOR CONCRETE WEIGHT COATING APPLIED BY THE COMPRESSION METHOD TO STEEL PIPE GENERAL a. These specifications may be used in whole or in part by any party without

More information

Active and Passive Sash Replacement

Active and Passive Sash Replacement for Andersen Gliding Windows Read all instructions carefully before attempting this procedure. If you have any questions about your ability to complete the procedure, call Andersen at 1-888-888-7020 for

More information

Premium Nixalite All Stainless Steel Bird Barrier Spikes Includes specifications for: Premium Nixalite Models S, H and W and Mounting Hardware.

Premium Nixalite All Stainless Steel Bird Barrier Spikes Includes specifications for: Premium Nixalite Models S, H and W and Mounting Hardware. Three-Part Specifications - Copyright 2014 - Nixalite of America Inc Premium Nixalite All Stainless Steel Bird Barrier Spikes Includes specifications for: Premium Nixalite Models S, H and W and Mounting

More information

Portable Ladder Safety

Portable Ladder Safety Portable Ladder Safety Agenda Importance of Ladder Safety An Approved Ladder Controlling Hazards Inspecting the Ladder Set Up Use Importance of Ladder Safety Any fall can be serious, and a fall from the

More information

Colorado State University. Durrell Center Roof Repair

Colorado State University. Durrell Center Roof Repair Colorado State University Durrell Center Roof Repair SPECIFICATION: POLYURETHANE FOAM ROOFING l.0 GENERAL REQUIREMENTS The successful application of a polyurethane foam roofing system is dependent upon

More information

INTERGOVERNMENTAL STANDARD GOST 3916.1-96

INTERGOVERNMENTAL STANDARD GOST 3916.1-96 INTERGOVERNMENTAL STANDARD GOST 3916.1-96 Plywood with outer layers of deciduous veneer for general use. Contents DESCRIPTION GENERAL USE PWOOD CLASSIFICATION AND DIMENSIONS( table1,2) TECHICAL REQUIREMENTS

More information

7. Installation. installation 7.1.1. CAST-IN WINDOW SYSTEM 7.1. INSTALLATION OF WINDOW MAIN FRAME

7. Installation. installation 7.1.1. CAST-IN WINDOW SYSTEM 7.1. INSTALLATION OF WINDOW MAIN FRAME 7. Installation Window involves the fixing of window frame at an earlier construction stage and subsequent of the window sashes. This is a highly workmanship dependent process. Only trained and approved

More information

1.02 DESCRIPTION A. This Section specifies furnishing and installing Cast in Place Detectable/Tactile Warning Surface tiles where indicated.

1.02 DESCRIPTION A. This Section specifies furnishing and installing Cast in Place Detectable/Tactile Warning Surface tiles where indicated. CAST IN PLACE DETECTABLE/TACTILE WARNING SURFACE TILE PART 1 GENERAL 1.01 RELATED DOCUMENTS A. Drawings and general provisions of Contract, including General and Special Conditions and Division 1 Specifications

More information

Model # 940P-V6. Page 1 of 11

Model # 940P-V6. Page 1 of 11 Model # 940P-V6 Page 1 of 11 Page 2 of 11 WARRANTY & TERMS WARRANTY: 5 Year Limited Warranty on Thermoplastic coated elements. Ultra Play guarantees all items for one full year to be free of defects in

More information

Barewood Octagon and Elongated Windows Installation Instructions

Barewood Octagon and Elongated Windows Installation Instructions Step-by-step instructions to a beautiful window. Measuring and Installation of your new window from Century Specialty Windows couldn't be easier with our step-by-step instructions. Quality, function and

More information

Natural Thin Stone Veneer

Natural Thin Stone Veneer Natural Thin Stone Veneer Until recently, if a project called for the natural look of stone but could not support its weight or thickness, the options were limited to manufactured imitation stone. More

More information

Columbia flooring will resist fading from exposure to sunlight or artificial light.

Columbia flooring will resist fading from exposure to sunlight or artificial light. LIMITED LIFETIME WARRANTY AND MAINTENANCE FOR RESIDENTIAL USE Columbia is so confident in the design and durability of our Columbia flooring products and accessories, that we back them with a Limited Lifetime

More information

Structural Failures Cost Lives and Time

Structural Failures Cost Lives and Time Structural Failures Cost Lives and Time Recent failures of storage bins, silos and other structures highlight the need to increase awareness of hazards associated with these structures. Since 2010, one

More information

BRIDGE FIELD PAINTING, REPAINTING, 412 AND PAINT RESIDUE CONTAINMENT. A. Field Painting, Bridge Repainting and Residue Containment:

BRIDGE FIELD PAINTING, REPAINTING, 412 AND PAINT RESIDUE CONTAINMENT. A. Field Painting, Bridge Repainting and Residue Containment: 412.1 DESCRIPTION BRIDGE FIELD PAINTING, REPAINTING, 412 This specification contains the requirements for the removal, containment, and disposal of existing paint on steel surfaces, preparing the steel

More information

Convertible Crib and Changer (M668)

Convertible Crib and Changer (M668) Model No.: M668 PO #: Serial #: Convertible Crib and Changer (M668) THIS PRODUCT IS NOT INTENDED FOR INSTITUTIONAL OR COMMERCIAL USE. If you have any questions or missing parts, please contact us. DO NOT

More information

POWERSANDING WOOD BOWLS by John Franklin

POWERSANDING WOOD BOWLS by John Franklin POWERSANDING WOOD BOWLS by John Franklin We have all been taught to consider sanding a less than desirable function when turning wood. Although skill with your tools will normally reduce the need to do

More information

Salter Industries, Spiral Stair

Salter Industries, Spiral Stair Salter Industries, Spiral Stair Adjustable Stair Installation Instructions TOOLS NEEDED: 1. Electric drill with hex chuck and Phillips bit 2. Drill bits 1/8", 1/4", 3/16", 3/8" 3. Socket Set 4. Tape Measure

More information

State of Illinois Department Of Transportation CONSTRUCTION INSPECTOR S CHECKLIST FOR STORM SEWERS

State of Illinois Department Of Transportation CONSTRUCTION INSPECTOR S CHECKLIST FOR STORM SEWERS State of Illinois Department Of Transportation CONSTRUCTION INSPECTOR S CHECKLIST FOR STORM SEWERS While its use is not required, this checklist has been prepared to provide the field inspector a summary

More information

STAINING OF BUILDING PANELS FROM STEEL DEBRIS

STAINING OF BUILDING PANELS FROM STEEL DEBRIS BACKGROUND Technical TSB 4.1 Bulletin Construction STAINING OF BUILDING PANELS FROM STEEL DEBRIS TBP 2012.1 BACKGROUND Steel debris, when allowed to remain on a building following its construction, will

More information

Tundra Series Windows January 2016

Tundra Series Windows January 2016 Tundra Series Windows January 2016 New Construction Installation Instructions Nail Fin, J-Fin and Brickmold Aplications product. ATTENTION! Read and understand all installation instructions before installing

More information

BLACK JACK ALL WEATHER ROOF COATING

BLACK JACK ALL WEATHER ROOF COATING PAGE: 1 of 6 PRINT DATE: 16/09/2004 BLACK JACK ALL WEATHER ROOF COATING DESCRIPTION BLACK JACK ALL WEATHER ROOF COATING is a solvent based, full bodied black brushable compound with added fibres for reinforcement.

More information

FINGERPRINTING IS A SCIENCE - TAKE A SCIENTIFIC APPROACH

FINGERPRINTING IS A SCIENCE - TAKE A SCIENTIFIC APPROACH FINGERPRINTING IS A SCIENCE - TAKE A SCIENTIFIC APPROACH FINGERPRINT CLEAN HANDS ONLY DRY HANDS THOROUGHLY ROLL FINGERS FROM NAIL-TO-NAIL NOTE THE CORES AND DELTAS TAKE IMPRESSIONS IN CORRECT ORDER PRODUCE

More information

IHSS-N1 WELDED HONEYCOMB CORE SPECIFICATION. Generated: Sergiy Papyshev Engineering. Approved: Don Prysi Manufacturing. Approved: Merzuk Ramic Quality

IHSS-N1 WELDED HONEYCOMB CORE SPECIFICATION. Generated: Sergiy Papyshev Engineering. Approved: Don Prysi Manufacturing. Approved: Merzuk Ramic Quality IHSS-N1 WELDED HONEYCOMB CORE SPECIFICATION Generated: Sergiy Papyshev Engineering Approved: Don Prysi Manufacturing Approved: Merzuk Ramic Quality Approved: Steven Barnett Administrative DATE DATE DATE

More information

Autobody/Collision and Repair Technology/Technician CIP 47.0603 Task Grid

Autobody/Collision and Repair Technology/Technician CIP 47.0603 Task Grid 1 Secondary Task List 100 ORIENTATION 101 Identify opportunities in the auto body field. 102 Identify basic auto body construction. 103 Identify program rules and policies. 104 Identify government agencies

More information

INSTALLATION INSTRUCTION - INSTRUCCIONES DE INSTALACION FOR DOUBLE-HUNG VENT REPLACEMENT WINDOW

INSTALLATION INSTRUCTION - INSTRUCCIONES DE INSTALACION FOR DOUBLE-HUNG VENT REPLACEMENT WINDOW Vinyl Windows and Doors Manufactured by Pella Corporation INSTALLATION INSTRUCTION - INSTRUCCIONES DE INSTALACION FOR DOUBLE-HUNG VENT REPLACEMENT WINDOW Lea las instrucciones en español en el reverso.

More information

T R A N S F E R A B L E F U L LY

T R A N S F E R A B L E F U L LY HSTOPS A WALL OF WATER 22 FT. HIG! F U L LY T R A N S F E R A B L E RESISTS10 PSI ! 1 F U L LY T R A N S F E R A B L E HSTOPS A WALL OF WATER 22 FT. HIG RESISTS10 PSI Guaranteed To Stop Water Even Under

More information

PAAM COMMERCIAL PRIVATE LIMITED

PAAM COMMERCIAL PRIVATE LIMITED METAL PACKAGING We at Paam Group have been providing vast range of packaging products to our customers based on their preferences, needs and specifications. We provide all the materials required in metal

More information

FSP08 i mpr e ssi o n s

FSP08 i mpr e ssi o n s An introduction to tracks, footprints and plaster casts Shoeprints and tyre tracks can be very helpful to those investigating a crime. Prints can leave behind important pieces of information and even though

More information

EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS

EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS EXPANDED POLYSTYRENE (EPS) INSULATION BOARD SPECIFICATIONS 1. SCOPE 1.1 This specification covers the type, physical properties and dimensions of Expanded Polystyrene Insulation Board intended for use

More information

Assembly instructions: Seven A4-sized sheets. Paper craft: Four A4-sized sheets with 18 parts in all

Assembly instructions: Seven A4-sized sheets. Paper craft: Four A4-sized sheets with 18 parts in all Thank you for downloading this paper craft model of the Blakiston's Fish Owl. By matching the names and numbered parts in the instructions, you and your family can complete a paper craft model of this

More information

DIY CABINET REFACING INSTALLATION GUIDE

DIY CABINET REFACING INSTALLATION GUIDE DIY CABINET REFACING INSTALLATION GUIDE CABINET REFACING INSTALLATION Are you ready to reface your outdated cabinets? This guide will show you how to install your new Facelifters Cabinet Refacing Products

More information

Annex A. Specifications for. Patient's Chair, Waiting Area Chair, Doctor's Chair, & Staff's Chair

Annex A. Specifications for. Patient's Chair, Waiting Area Chair, Doctor's Chair, & Staff's Chair Annex A Specifications for Patient's Chair, Waiting Area Chair, Doctor's Chair, & Staff's Chair - Page 1 of 17 - 1. Functional Requirements 1.1 Patient's Chair 1.1.1. The unit intended for use in various

More information

CERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011

CERTIFICATE NAME OF PRODUCT MANUFACTURER PRODUCT DESCRIPTION CERTIFICATION PROCEDURE. No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 CERTIFICATE NAME OF PRODUCT No VTT C-6044-10 Date of issue 11.10.2010, Updated July 1, 2011 H-CONTROL REFLEX+ reflective insulating vapour control layer for roof and wall applications MANUFACTURER ACTIS

More information

INSTALLATION RECOMMENDATIONS. Outdoor Rubber Tiles

INSTALLATION RECOMMENDATIONS. Outdoor Rubber Tiles INSTALLATION RECOMMENDATIONS Outdoor Rubber Tiles Prior to Installation: The Outdoor Rubber Tiles and accessory transition pieces intended for this installation have been shipped to you via a freight carrier

More information

WESTERN COOL ROOF SYSTEMS Sustainable - Energy Efficient FLUID APPLIED REINFORCED ROOF SYSTEM

WESTERN COOL ROOF SYSTEMS Sustainable - Energy Efficient FLUID APPLIED REINFORCED ROOF SYSTEM WESTERN COOL ROOF SYSTEMS Sustainable - Energy Efficient FLUID APPLIED REINFORCED ROOF SYSTEM SPECIFICATION NO. SMAA-2P-8xE UPGRADE SMOOTH SURFACE / CAP SHEET / SINGLE PLY 2 PLY POLYESTER REINFORCED ACRYLIC

More information

CEILING SYSTEMS. CI/SfB (35) Xy April 2006. [Between us, ideas become reality.] ULTIMA CANOPY. Data sheet. Acoustic performance meets High Design

CEILING SYSTEMS. CI/SfB (35) Xy April 2006. [Between us, ideas become reality.] ULTIMA CANOPY. Data sheet. Acoustic performance meets High Design CEILING SYSTEMS [Between us, ideas become reality.] CI/SfB (35) Xy April 2006 ULTIMA CANOPY Data sheet Acoustic performance meets High Design ULTIMA CANOPY Installation Instructions I. GENERAL 1. Product

More information

Installation Instructions Double-Hung, Single-Hung, Casement, Awning, Sliding, Picture & Shapes Non-Impact & Impact Resistant Nailing Fin Windows

Installation Instructions Double-Hung, Single-Hung, Casement, Awning, Sliding, Picture & Shapes Non-Impact & Impact Resistant Nailing Fin Windows Installation Instructions Double-Hung, Single-Hung, Casement, Awning, Sliding, Picture & Shapes Non-Impact & Impact Resistant Nailing Fin Windows americancraftsmanwindows.com Project Requirements: Read

More information

1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS

1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS By Denny Williams Photos by Denny Williams 1958-64 WINDOW CHANNEL, WEATHERSTRIP & WHISKER STRIP REPLACEMENT FOR 2-DOOR SEDANS Denny Williams - Technical Writer Denny is first and foremost a dyed-in-thewool

More information

Pigeon Spike Stainless Economy Bird Spikes Includes specifications for: Pigeon Spike Stainless models, hardware and surface cleaning.

Pigeon Spike Stainless Economy Bird Spikes Includes specifications for: Pigeon Spike Stainless models, hardware and surface cleaning. Three-Part Specifications - Copyright 2014 - Nixalite of America Inc Pigeon Spike Stainless Economy Bird Spikes Includes specifications for: Pigeon Spike Stainless models, hardware and surface cleaning.

More information

Brick Veneer Construction

Brick Veneer Construction Brick Veneer Construction Check list of suggested tools & support items Claw hammer Tape measure 3/4" [19 or 20] Wood chisel Wood or plastic shims Pry bar Utility knife Caulking and caulking gun Power

More information

Using This Guide. Recognizing a Bed Bug

Using This Guide. Recognizing a Bed Bug Using This Guide Bed bug infestations are increasingly common in the US. There are steps that can be taken to prevent bed bugs from infesting your home. When bed bugs are present, they can be safely controlled.

More information

GK Packing System Welding Instructions

GK Packing System Welding Instructions GK Packing System Welding Instructions Roxtec GmbH Neuer Höltigbaum 1-3, 22143 Hamburg GERMANY Tel +49 (040) 657398-0, Fax +49 (040) 657398-50 EMAIL info@de.roxtec.com, www.roxtec.de Welding instructions

More information

Choosing the Right Floor Protectors

Choosing the Right Floor Protectors Choosing the Right Floor Protectors You ve made the investment in new flooring for your home. So what can you do to help ensure your flooring stays looking like new? One of the biggest flooring maintenance

More information

TECHNICAL SPECIFICATION SERIES 8000 PRECAST CONCRETE

TECHNICAL SPECIFICATION SERIES 8000 PRECAST CONCRETE TECHNICAL SPECIFICATION SERIES 8000 PRECAST CONCRETE TECHNICAL SPECIFICATION PART 8000 - PRECAST CONCRETE TABLE OF CONTENTS Item Number Page 8100 PRECAST CONCRETE CONSTRUCTION - GENERAL 8-3 8101 General

More information

POLYURETHANE LINING AND COATING ON PIPE RAW WATER

POLYURETHANE LINING AND COATING ON PIPE RAW WATER POLYURETHANE LINING AND COATING ON PIPE RAW WATER PART 1 -- GENERAL 1.1 THE REQUIREMENT A. The CONTRACTOR shall provide pipe coating, complete and in place, in accordance with the Contract Documents. 1.2

More information

2. This is a close up of a typical area where the rocker is rusted out leaving holes under where the rocker moulding would be..

2. This is a close up of a typical area where the rocker is rusted out leaving holes under where the rocker moulding would be.. ROCKER PANELS 55,56,57 CHEVY REPLACEMENT Do not throw away any pieces when you first remove them. There are many supports that are not reproduced and will need to be used again. When disassembling try

More information

Product Information. Tel: 905.696.9900 x2426 or x2443 Fax: 905.696.9300 Email: sales@alusion.com

Product Information. Tel: 905.696.9900 x2426 or x2443 Fax: 905.696.9300 Email: sales@alusion.com Tel: 905.696.9900 x2426 or x2443 Fax: 905.696.9300 Email: sales@alusion.com Product Information 6320-2 Danville Rd. Mississauga, Ontario Canada L5T 2L7 TABLE OF CONTENTS Sheet Product Alusion Sheet Products.......................................................

More information

GUIDE TO WINDOW REPAIR & REPLACEMENT FOR HISTORIC PROPERTIES

GUIDE TO WINDOW REPAIR & REPLACEMENT FOR HISTORIC PROPERTIES Approved by City of Phoenix Historic Preservation Commission 8/15/2011 CITY OF PHOENIX PLANNING & DEVELOPMENT DEPARTMENT HISTORIC PRESERVATION OFFICE GUIDE TO WINDOW REPAIR & REPLACEMENT FOR HISTORIC PROPERTIES

More information

CHAPTER 6 ASPHALT ROLL ROOFING

CHAPTER 6 ASPHALT ROLL ROOFING CHAPTER 6 ASPHALT ROLL ROOFING Section I. DESCRIPTION AND GENERAL DISCUSSION 6.1.1 General 6.1.3 Mineral-Surfaced Asphalt roll roofing is roofing in sheet form Mineral-surfaced roll roofing is composed

More information

TOLL FREE: (866) 591-7792. E-Mail: techmail@vigoindustries.com. www.vigoindustries.com VANITY SPECIFICATIONS. VANITY COMPONENTS Model VG09042K1

TOLL FREE: (866) 591-7792. E-Mail: techmail@vigoindustries.com. www.vigoindustries.com VANITY SPECIFICATIONS. VANITY COMPONENTS Model VG09042K1 VANITY SPECIFICATIONS VANITY COMPONENTS Model VG09042K1 MODEL VG09042K1 FEATURES Freestanding cabinet Soft closing sliding cabinet drawer hardware White, single hole ceramic sink Cabinet ships assembled

More information

4) The relationship between caliper, height and root ball size shall meet the ANSI Z60.1 standard.

4) The relationship between caliper, height and root ball size shall meet the ANSI Z60.1 standard. 12. QUALITY ASSURANCE A. Source Quality Control 1. Ship landscape materials with certificates of inspection required by governing authorities. Comply with regulations applicable to landscape materials.

More information

Tools required by installer: Materials required by installer:

Tools required by installer: Materials required by installer: Installation Guidelines For Quaker Window Products Vinyl replacement product line (Single Hung, Double Hung, Sliding Window, Fixed Window, Casement, Awning, and Hopper) Installer: Read these instructions

More information

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta

PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification. 96 B. Riutta PIPING SYSTEM - ABRASIVE SLURRIES Engineering Standard Specification Number: 3503-11.2.610 Rev. 2 Rubber Lined Steel Pipe and Fittings Mechanically Coupled Plain End Type System Issued Revised Approved

More information

Notes. Material 1. Tools the employee is expected to operate

Notes. Material 1. Tools the employee is expected to operate OSHA Standard29 CFR 1910.211-.247, Subpart O, Machinery and Machine Guarding, and Subpart P, Hand and Portable-Powered Tools and other Hand- Held Equipment. Hand Tool Safety Preparation 1. Read Applicable

More information

Shower Walls and Tub Surrounds

Shower Walls and Tub Surrounds Reverso en español TEC Skill Set How-To Project Guide Shower Walls and Tub Surrounds 3 Steps to a Beautiful Tile Surface! 1. Prepare the surface 2. Set the tile 3. Grout and caulk H.B. Fuller Construction

More information

PanelTack. For the bonding of steni Colour type 7 façade panels. steni Colour 7. steni Colour 7

PanelTack. For the bonding of steni Colour type 7 façade panels. steni Colour 7. steni Colour 7 PanelTack For the bonding of steni type 7 façade panels Product Simson PanelTack is a moisture curing, highly elastic adhesive based on SMP (Silyl Modified Polymer). PanelTack is solvent- and isocyanate

More information

THE METALITH PERIMETER SECURITY SYSTEM INSTALLATION INSTRUCTIONS. Attention

THE METALITH PERIMETER SECURITY SYSTEM INSTALLATION INSTRUCTIONS. Attention THE METALITH PERIMETER SECURITY SYSTEM INSTALLATION INSTRUCTIONS Thank you purchasing the Metalith Perimeter Security System. The following document provides the manufacturer s recommendations for successful

More information

Fiberglas, Exterior Wall Thermal Insulation

Fiberglas, Exterior Wall Thermal Insulation PROJECT ENGINEER RESPONSIBILITY: This is a general specification guide, intended to be used by experienced construction professionals, in conjunction with good construction practice and professional judgment.

More information

STANDARD SPECIFICATIONS SECTION 02512 CLEANING AND LINING WATER MAINS

STANDARD SPECIFICATIONS SECTION 02512 CLEANING AND LINING WATER MAINS STANDARD SPECIFICATIONS SECTION 02512 CLEANING AND LINING WATER MAINS PART 1 GENERAL 1.1 DESCRIPTION A. Section includes requirements for cleaning and lining existing cast iron and ductile iron water mains

More information

12.1 Schlüter -KERDI-BOARD

12.1 Schlüter -KERDI-BOARD I n n o v a t i v e p r o f i l e s 12.1 Schlüter -KERDI-BOARD S u b s t r a t e U N I V E R S A L S T R U C T U R A L P A N E L, B O N D E D W A T E R P R O O F I N G Application and Function Schlüter

More information

AA Solar and Sun Power Plus

AA Solar and Sun Power Plus AA Solar and Sun Power Plus www.aasolar.co.nz www.sunpowerplus.co.nz -1- Contents Chapter Title Page 1 General information 3 2 Safety and Installer Responsibilities 4 3 Technical Specifications 5 4 Tools

More information

PREVENTATIVE MAINTENANCE

PREVENTATIVE MAINTENANCE PREVENTATIVE MAINTENANCE Good housekeeping is a must, and cannot be over-emphasized in today's world of safety-conscious regulations. A well-maintained and clean work environment results in more machine

More information

Triple Threat 3-in-1 Game Table 3 IN 1 GAME TABLE

Triple Threat 3-in-1 Game Table 3 IN 1 GAME TABLE NG0M Triple Threat 3-in- Game Table 3 IN GAME TABLE Thank 3 in Y Game Table Thank you for your purchase of our product. We work around the clock and around the globe to ensure that our products maintain

More information

Your guide to home maintenance. Flat Roofs

Your guide to home maintenance. Flat Roofs Your guide to home maintenance Flat Roofs Your guide to home maintenance is a series of information leaflets that gives you all the information you need to keep your home in tiptop condition. Flat Roofs

More information

1300 West Bartlett Road Elgin, Illinois 60120-7529 Phone: (847) 741-5370 Fax: (847) 622-7077. SUBJECT: Pelican NP and NS Cab Glass Replacement

1300 West Bartlett Road Elgin, Illinois 60120-7529 Phone: (847) 741-5370 Fax: (847) 622-7077. SUBJECT: Pelican NP and NS Cab Glass Replacement SERVICE BULLETIN Subsidiary of Federal Signal Corporation 1300 West Bartlett Road Elgin, Illinois 60120-7529 Phone: (847) 741-5370 Fax: (847) 622-7077 DATE: 08/07/2007 NUMBER: 0703146 SUBJECT: Pelican

More information

BUILDING MATERIALS, Wood, Laminated (Page 1 of 3) Viz.: Rafters; Arches; Beams; Joists; Timbers or Planks, structural or roof.

BUILDING MATERIALS, Wood, Laminated (Page 1 of 3) Viz.: Rafters; Arches; Beams; Joists; Timbers or Planks, structural or roof. BUILDING MATERIALS, Wood, Laminated (Page 1 of 3) Viz.: Rafters; Arches; Beams; Joists; Timbers or Planks, structural or roof. 1155 & 4155 LCL: Applies to all freight in less than container load quantities.

More information

Technical Services. Product MM INCH Installation direction Seams treatment GTI CONNECT (interlocking)

Technical Services. Product MM INCH Installation direction Seams treatment GTI CONNECT (interlocking) INSTALLATION INSTRUCTIONS FOR GTI CONNECT TILES This document refers to the following products: Product MM INCH Installation direction Seams treatment GTI CONNECT (interlocking) 635 X 635 mm 25.5 x 25.5

More information

The Rhode Island 4-H Show Box. Introduction: Lumber:

The Rhode Island 4-H Show Box. Introduction: Lumber: The Rhode Island 4-H Show Box Introduction: An essential item for the 4-H Member planning a livestock project is an Equipment Show Box. The show box provides a neat and orderly storage space for the equipment

More information

Solar Mounting System

Solar Mounting System Xiamen Antai New Energy Tech.Co., Ltd Installation Manual Antai Rail Solar Mounting System (Flat Roof Solution) Version 1.1 Office Add: 508#, North Tower, Guangxia Building Huli Torch Hi-tech Zone, Xiamen,

More information

1.2.1 1.1.8 PRODUCTBLADEN GT ROCKPANEL STRUCTURE

1.2.1 1.1.8 PRODUCTBLADEN GT ROCKPANEL STRUCTURE 1..1 1.1.8 PRODUCTBLADEN SHEETS GT page 1 to 6 Rockpanel Structure is a very durable panel with a lightly textured finish, specially developed for use in cladding, fascia, soffit applications. The basic

More information

Parcel Packaging Guidelines

Parcel Packaging Guidelines Parcel Packaging Guidelines Packaging & Labeling Guidelines DX is committed to delivering your parcels with care. However, parcels are handled regularly, passing through many locations on the journey to

More information

Reflective Safety Products. Home Automotive Commercial

Reflective Safety Products. Home Automotive Commercial Reflective Safety Products Home Automotive Commercial Driveway Markers 2673 2689 2707 2706 2708 2661 2662 2690 12" Foot Spike 36" 46" 2673 12 Mini-Marker 6-Pack 2689, 2707 36 Driveway Marker 2706, 2708

More information

Passenger cars. www.vmf-fuhrparkmanagement.de

Passenger cars. www.vmf-fuhrparkmanagement.de EVALUATION CRITERIA The fair vehicle evaluation VMF www.vmf-fuhrparkmanagement.de LEGEND EVALUATION CRITERIA Looking back everything has run smoothly with The fair vehicle evaluation VMF Tires Wheel covers

More information

ENGLISH FORK GUIDE 2013

ENGLISH FORK GUIDE 2013 FORK GUIDE 2013 ENGLISH 1 With a brand which is synonymous with specialists in forest products handling attachments, BOLZONI AURAMO offers its expertise and market leading attachments for all requirements,

More information

Polishing Stainless Steel and Aluminum

Polishing Stainless Steel and Aluminum Polishing Stainless Steel and Aluminum Richard Widman This paper describes the process for restoring stainless steel and aluminum parts. While it is particularly aimed at car hobbyists, the process is

More information

Selecting Vinyl Flooring

Selecting Vinyl Flooring extension.usu.edu Smart Shopping for Home Furnishings Selecting Vinyl Flooring Dr. Leona Hawks Home Furnishings & Housing Specialist 1987 HI 03 Shopping for vinyl? There are many different varieties of

More information

Children s Furniture Projects

Children s Furniture Projects This is an excerpt from the book Children s Furniture Projects by Jeff Miller Copyright 2002 by The Taunton Press www.taunton.com CHILD S ROCKER KIDS ARE ALWAYS IN MOTION. It s not easy to get them even

More information

TASTECH SERVICES LTD. Manufacturer and Supplier of Equipment and Daily Living Aides to Hospitals, Resthomes, OT s and the General Public

TASTECH SERVICES LTD. Manufacturer and Supplier of Equipment and Daily Living Aides to Hospitals, Resthomes, OT s and the General Public TASTECH SERVICES LTD Manufacturer and Supplier of Equipment and Daily Living Aides to Hospitals, Resthomes, OT s and the General Public Issue One Phone (03) 343 2122 e.mail: info@tastechservices.co.nz

More information

Pole Lathe and Shave Horse Design

Pole Lathe and Shave Horse Design Pole Lathe and Shave Horse Design These pictures and accompanying words are Copyright Michael Hughes February 2002. They are not to be re-produced, in part or whole, without permission from the author.

More information

STAUN INTERNAL BEADLOCK TM IS IDEAL FOR USE WHEN COASTAL SAND DRIVING, DESERT SAND DRIVING, ROCK CLIMBING

STAUN INTERNAL BEADLOCK TM IS IDEAL FOR USE WHEN COASTAL SAND DRIVING, DESERT SAND DRIVING, ROCK CLIMBING STAUN INTERNAL BEADLOCK TM IS IDEAL FOR USE WHEN COASTAL SAND DRIVING, DESERT SAND DRIVING, ROCK CLIMBING & MUD DRIVING. installation 1 5 2 4 1) Locate position for the tube valve stem hole: The beadlock

More information

INSTRUCTIONS FOR COORDINATION SECTION 06651 SOLID SURFACE FABRICATIONS

INSTRUCTIONS FOR COORDINATION SECTION 06651 SOLID SURFACE FABRICATIONS INSTRUCTIONS FOR COORDINATION SECTION 06651 SOLID SURFACE FABRICATIONS 1. Paragraph 1.02 Provide solid surface countertops at sinks locations. Provide solid surface window sills at drywall framing walls.

More information