Seminar Seite 1 von 10

Size: px
Start display at page:

Download "Seminar Seite 1 von 10"

Transcription

1 Seminar Seite 1 von 10 CISCO - Implementing Cisco IP Routing (ROUTE) Dauer: 5 Tage Kosten: 2.490,00 EUR (pro Person / zzgl. MwSt) Ziele: Der Kurs Implementing Cisco IP Routing (ROUTE) vermittelt den Teilnehmern das Wissen um die Implementierung von komplexen LAN und WAN Lösungen mit verschiedensten Routingprotokollen zu planen, zu konfigurieren und zu verifizieren. Der Kurs behandelt zudem die Konfiguration von sicheren Routinglösungen um Zweigstellen und mobile Nutzer anzubinden. Der Kurs bereitet die Teilnehmer auf die CCNP Zertifizierung vor. Inhalte: Module 1: Planning Routing Services to Requirements Plan and document the configuration and verification of routing protocols and its optimization in enterprise networks. Lesson 1: Assessing Complex Enterprise Network Requirements This lesson describes the converged network requirements of various network and networked applications within the Cisco network architectures. This will result in the ability to identify information that must be collected when filling out an implementation plan. This ability includes being able to meet these objectives: Defining Cisco network models Understanding traffic conditions in a converged network Understanding Cisco SONA framework Understanding routing and routing protocols Lesson 2: Common Maintenance Processes and Procedures This lesson describes the requirements of the enterprise network, implementation plan and documentation of implementation process, and its results. This ability includes Create an implementation plan Define the implementation plan tasks Develop the implementation plan documentation Create an implementation plan example Lesson 3: Lab 1-1 Debrief This lesson explains gathering of network requirements and required data. You will be able to create implementation plan, verify, and document the whole process. This ability includes Describe the lab topology and identify the implementation and verification tasks

2 Seminar Seite 2 von 10 Lab Lab 1-1: Assess skills for implementing complex networks Module 2: Implementing an EIGRP based Solution Identify the technologies, components, and metrics of EIGRP to implement and verify EIGRP routing in diverse, largescale internetworks based on requirements. Lesson 1: Planning Routing Implementations with EIGRP This lesson describes the components and metrics of EIGRP, how EIGRP selects routes between routers in diverse, large-scale internetworks, the implementation plan creation process, and basic EIGRP configuration. This ability includes Understanding EIGRP Capabilities and Attributes Understanding EIGRP Operation and Metrics Planning and Documenting for EIGRP Implementing Basic EIGRP Lesson 2: Implementing and Verifying Basic EIGRP for the Enterprise LAN Architecture This lesson describes how to verify and implement EIGRP routing. This ability includes Verifying EIGRP Routes for IPv4 Verifying EIGRP Operation for IPv4 Using the Passive-Interface Command with EIGRP Advertising an IP Default-Network in EIGRP Determining Summary Boundaries Utilizing Manual Route Summarization Lesson 3: Lab 2-1 Debrief This lesson explains how to configure and verify EIGRP operations. This ability includes Identify the implementation and verification tasks for basic EIGRP configuration and how to influence the EIGRP path selection Lesson 4: Configuring and Verifying EIGRP for the Enterprise WAN Architecture This lesson describes, recognizes, and deploys EIGRP operation over various WAN technologies and be able to scale the operation with load balancing and proper bandwidth utilization. This ability includes Configuring and verifying EIGRP over Frame Relay and on a Physical Interface Configuring and verifying EIGRP over Multipoint Sub-Interfaces Configuring and verifying EIGRP over Point-to-Point Sub-Interfaces Implementing Load Balancing Across Equal-Metric Paths Implementing Load Balancing Across Unequal-Metric Paths Determining EIGRP Bandwidth use Across WAN Links

3 Seminar Seite 3 von 10 Implementing EIGRP over Layer 2 and Layer 3 MPLS VPN Lesson 5: Lab 2-2 Debrief This lesson explains how to configure and verify EIGRP circuit emulation and Frame Relay operations. This ability includes being able to meet these objectives: Identify the implementation and verification tasks for basic EIGRP configuration and how to influence the EIGRP path selection Lesson 6: Implementing and Verifying EIGRP Authentication This lesson describes how to implement and verify authentication in an EIGRP network. This ability includes being able to meet these objectives: Determining Router Authentication for EIGRP Determining MD5 Authentication for EIGRP Implementing MD5 Authentication for EIGRP Verifying MD5 Authentication for EIGRP Lesson 7: Lab 2-3 Debrief This lesson explains how to configure and verify EIGRP Authentication. This ability includes Identify the implementation and verification tasks for EIGRP authentication over LAN and WAN interfaces Lesson 8: Advanced EIGRP Features in an Enterprise Network This lesson describes how to implement advanced EIGRP features in an Enterprise Network by applying the planned implementation processes using correct Cisco IOS commands and applications as well as verify that the configuration was correctly implemented. This ability includes Defining scalability in large networks Understanding EIGRP Queries Defining SIA connections in EIGRP Understanding EIGRP stub routers Lesson 9: Lab 2-4 Debrief This lesson explains how to implement and troubleshoot EIGRP operations to solve EIGRP adjacency and limited connectivity. This ability includes Identify the implementation, verification, and troubleshooting tasks for EIGRP operations to solve adjacency and connectivity issues Labs: Lab 2-1: Configure and verify EIGRP operations Lab 2-2: Configure and verify EIGRP circuit emulation, and Frame Relay operations

4 Seminar Seite 4 von 10 Lab 2-3: Configure and verify EIGRP Authentication Lab 2-4: Implement and Verify EIGRP operations Module 3: Implementing a Scalable Multiarea Network OSPF Based Solution Identify, analyze, and match OSPF multiarea routing functions and benefits for routing efficiencies in network operations in order to implement and verify OSPF routing in a complex enterprise network. Lesson 1: Planning Routing Implementations with OSPF as Scalable Routing Protocol This lesson explains link state protocols, components and metrics of OSPF, how OSPF operates, and the implementation plan creation process. This ability includes being able to meet these objectives: Determining Link-State Routing Protocols Determining OSPF Area Structure Determining OSPF Adjacency Database Calculating the OSPF Metric Determining Link-State Data Structures Maintaining Link-State Sequence Numbers Planning for OSPF Implementation Lesson 2: How OSPF Packet Processes Work This lesson explains how information flows between routers to maintain OSPF links and which packets are used. This ability includes Determining OSPF Packet Types Establishing OSPF Neighbor Adjacencies Exchanging and Synchronizing LSDB s Maintaining Network Routes Verifying Packet Flow Lesson 3: Improving Routing Performance in a Complex Enterprise Network This lesson describes the features of various OSPF network architectures. This ability includes being able to meet these objectives: Introducing OSPF Network Types Determining Adjacency Behavior in Point-to-Point Links Determining Adjacency behavior in a Broadcast Network Determining Adjacency Behavior in a Metro Ethernet and EoMPLS Network Determining Adjacency Behavior in MPLS networks Selecting a DR and BDR Implementing OSPF over Different Frame Relay Implementations Implementing OSPF over Frame Relay NBMA Using Sub-Interfaces in OSPF over Frame-Relay Implementing OSPF over a Point-to-Point Frame-Relay Network Implementing OSPF over a Point-to-Multipoint Frame-Relay Network

5 Seminar Seite 5 von 10 Lesson 4: Configuring and Verifying OSPF Routing This lesson explains how to configure OSPF single-area and multiarea routing as well as several advanced features. This ability includes Initializing Single-Area and Multi-Area OSPF Activating OSPF within a Router in Single-Area and Multi-Area Defining the Router ID Verifying OSPF Operations Identifying LSA Types within the LSDB Limiting Adjacencies in OSPF with the Passive-Interface Command Defining Design limitations of OSPF Defining OSPF Virtual Links and solving the non-contiguous Area Problem Changing the Cost Metric Lesson 5: Lab 3-1 Debrief This lesson describes how to implement and verify OSPF to improve routing performance. This ability includes Identify the implementation, verification and troubleshooting tasks for OSPF operations over LAN and WAN interfaces with different frame relay WAN segment representations Lesson 6: Lab 3-2 Debrief This lesson describes how to implement and verify OSPF multiarea routing. Additionally manipulation of cost, router ID and routing updates is used to optimize the OSPF implementation. This ability includes being able to meet these objectives: Identify the implementation, verification and troubleshooting tasks for OSPF operations in multiarea over LAN and WAN interfaces with different frame relay WAN segment representations Lesson 7: Configuring and Verifying OSPF Route Summarization This lesson describes the procedure for configuring OSPF route summarization for interarea and external routes. This ability includes Determining OSPF Route Summarization Implementing OSPF Route Summarization Identifying the Benefits of a Default Route in OSPF Using a Default Route in OSPF Lesson 8: Lab 3-3 Debrief This lesson describes how to implement and verify OSPF route summarization for interarea and external routes. This ability includes being able to meet these objectives: Identify the implementation, verification, and troubleshooting tasks for OSPF route summarization for interarea and external routes

6 Seminar Seite 6 von 10 Lesson 9: Configuring and Verifying OSPF Special Area Types This lesson describes how to implement and verify OSPF area parameters, including stub, totally stubby, NSSA, and backbone. This ability includes Determining OSPF Area Types Defining and Implementing a Stub Area Defining and Implementing a Totally Stubby Area Interpreting Routing Tables for OSPF Area Types Defining and Implementing a Not-So-Stubby-Area and Totally-NSSA Area in OSPF Verifying All OSPF Area Types Lesson 10: Lab 3-4 Debrief This lesson describes how to implement and verify OSPF special area types. This ability includes Identify the implementation and verification tasks for implementing the OSPF special area types including stub, totally-stub, and totally not-so-stubby (NSSA) area Lesson 11: Configuring and Verifying OSPF Authentication This lesson describes how to implement authentication in an OSPF network. This ability includes being able to meet these objectives: Determining Types of OSPF Authentication Implementing Simple Password Authentication for OSPF Configuring MD5 Authentication for OSPF Troubleshooting Authentication for OSPF Lesson 12: Lab 3-5 Debrief This lesson describes how to implement and verify OSPF authentication. This ability includes Identify the implementation and verification tasks for implementing the OSPF authentication Labs: Lab 3-1: Configure and verify OSPF to improve routing performance Lab 3-2: Implement and verify OSPF multiarea routing Lab 3-3: Configure and verify OSPF route summarization for interarea and external routes Lab 3-4: Configure and verify OSPF special area types Lab 3-5: Configure and verify OSPF Authentication Module 4: Implement an IPv4-based Redistribution Solution Implement and verify a redistribution solution in a multi-protocol network that uses IOS features to control path selection and loop free topology according to a given network design and requirements.

7 Seminar Seite 7 von 10 Lesson 1: Assessing Network Routing Performance and Security Issues This lesson explains prefix-lists, distribute-lists and route-maps and how to use them to filter and control routing update traffic. This ability includes Determining Common Network Performance Issues Identifying How Distribution Lists Work Using Distribution-Lists to Control Routing Updates Identifying How Prefix Lists Work Using a Prefix-List to Control Routing Updates Identifying How Route-Map s Work Using Route-Map s to Control Routing Updates Using Route-Map s to Filter Routes Suppressing Routing Updates using Passive-Interface Lesson 2: Operating a Network Using Multiple IP Routing Protocols This lesson explains what route redistribution is and why it may be necessary. This ability includes being able to meet these objectives: Describing a Complex Routing Network Defining Route Redistribution Determining Default Metrics for Redistributed Routes Determining where to Redistribute Identifying Caveats of Redistribution Lesson 3: Configuring and verifying Route Redistribution This lesson explains how to configure route redistribution between multiple IP routing protocols. This ability includes Defining The Examples of Redistribution Defining The Administrative Distance Attribute Defining Route Redistribution using Administrative Distance Identifying The Impact of using Admin Distance for Route Manipulation Identifying The Redistribution using Route-Maps Describing The Route Redistribution using Route-Maps Lesson 4: Lab 4-1 Debrief This lesson describes how to configure redistribution between multiple routing protocols as well as implement filtering of routes. This ability includes Identify the implementation and verification tasks for implementing the redistribution between OSPF and EIGRP and OSPF and RIPv2 protocols Lab: Lab 4-1: Configure route redistribution between multiple IP routing protocols Module 5: Implementing Path Control Evaluate common network performance issues

8 Seminar Seite 8 von 10 and identify the tools needed to provide a layer 3 path control that uses IOS features to control the path. Lesson 1: Assessing Path Control Network Performance Issues This lesson explains common network performance issues caused by inefficient path control selection and identify what resources are needed to best provide a path control as well as implementation and verification of PBR. This ability includes Assessing Path Control Network Performance Using Filters to Determine Path Selection Using PBR to Determine Path Selection Configuring and Verifying PBR Configuring and verifying PBR Operations on a Cisco Router Lesson 2: Lab 5-1 Debrief This lesson explains destination based forwarding and configures path control using PBR tool. This ability includes Identify the implementation and verification tasks for manipulating the path for a selection of the packets traveling across the network Lesson 3: References to additional Path Control in E-Learning This lesson explains Preview the E-Learning products to teach creating Path Control through additional methods. This ability includes Implement Path Control by Other Methods Lab: Lab 5-1: Configure and verify Path Control between multiple IP routing protocols Module 6: Connecting an Enterprise Network to ISP Networks Implement and verify a layer 3 solution using BGP to connect an enterprise network to a service provider. Lesson 1: Planning the Enterprise-to-ISP Connection This lesson justifies the components and methods used to connect an enterprise network to an ISP. This ability includes being able to meet these objectives: Connecting enterprise networks to an ISP Exchanging routing updates with an ISP Understanding connection types to an ISP Lesson 2: Advantages of Using BGP This lesson explains how to match BGP functionality to advantages and to the benefits of using BGP to connect an enterprise network to ISPs. This ability includes Determining How To Use BGP to Connect to an ISP Understanding BGP Multihoming Options Configuring BGP Routing Between Autonomous Systems

9 Seminar Seite 9 von 10 Identifying Path-Vector Functionality Identifying Features of BGP Lesson 3: Comparing the Functions and Uses of EBGP and IBGP This lesson explains how to compare and contrast the requirements for establishing EBGP to IBGP neighbor relationships. This ability includes Defining BGP Neighbor Relationships Establishing External BGP Neighbor Relationships Establishing Internal BGP Neighbor Relationships Lesson 4: Configuring and Verifying Basic BGP Operations This lesson explains how to implement BGP operations by receiving an enterprise network and ISP specifications for connection. This ability includes Identifying specifications for Implementing BGP Establishing Internal and External BGP Neighbors Determining How To Shut Down a BGP Neighbor Understanding BGP Configuration Considerations Identifying BGP Neighbor States Implementing Authentication in BGP Creating an Example of Activating Basic BGP Configuring BGP Verification Lesson 5: Lab 6-1 Debrief This lesson explains lab topology, configuration of BGP operations, create checkpoints for configuration, and verification, as well as find alternative solutions. This ability includes Compare your solution, findings, and action log against a set of checkpoints provided by the instructor and identify common and alternative solutions Consolidate the lessons learned during the review discussions into a set of best practice methods and commands to aid you in future troubleshooting procedures Lesson 6: BGP Attributes and Path Selection Process This lesson explains how to configure and verify BGP operations in a multihomed environment using the BGP attributes and route maps to control the path selection for all BGP routes from the router. This ability includes Determining the BGP Path Selection Identifying The Characteristics of BGP Attributes for Path Selection and Path Manipulation Configuring Filtering of BGP Routing Updates Lesson 7: Lab 6-2 Debrief This lesson explains lab topology, configuring of BGP path manipulation using local preference and MED BGP attributes, creation of checkpoints for configuration, and verification as well as alternative solutions. This ability includes being able to meet these objectives:

10 Seminar Seite 10 von 10 Identify the implementation and verification tasks to establish BGP adjacency in the network and manipulate the BGP path using local preference and MED BGP attributes Lesson 8: References to Training on IPv6 and Branch Office/Remote Workers in E- Learning This lesson explains Preview the E-Learning products to teach creating Path Control through additional methods. This ability includes Implement path control by other methods Kontakt: Alexandra Gruber,

Example: Advertised Distance (AD) Example: Feasible Distance (FD) Example: Successor and Feasible Successor Example: Successor and Feasible Successor

Example: Advertised Distance (AD) Example: Feasible Distance (FD) Example: Successor and Feasible Successor Example: Successor and Feasible Successor 642-902 Route: Implementing Cisco IP Routing Course Introduction Course Introduction Module 01 - Planning Routing Services Lesson: Assessing Complex Enterprise Network Requirements Cisco Enterprise Architectures

More information

Seminar Seite 1 von 10

Seminar Seite 1 von 10 Seminar Seite 1 von 10 CISCO - Troubleshooting and Maintaining Cisco IP Networks (TSHOOT) Dauer: 5 Tage Kosten: 2.490,00 EUR (pro Person / zzgl. MwSt) Ziele: Der Kurs Implementing Cisco Switched Networks

More information

Textbook Required: Cisco Networking Academy Program CCNP: Building Scalable Internetworks v5.0 Lab Manual.

Textbook Required: Cisco Networking Academy Program CCNP: Building Scalable Internetworks v5.0 Lab Manual. Course: NET 251 Building Scalable Internetworks Credits: 3 Textbook Required: Cisco Networking Academy Program CCNP: Building Scalable Internetworks v5.0 Lab Manual. Course Description: In this course,

More information

IMPLEMENTING CISCO IP ROUTING V2.0 (ROUTE)

IMPLEMENTING CISCO IP ROUTING V2.0 (ROUTE) IMPLEMENTING CISCO IP ROUTING V2.0 (ROUTE) COURSE OVERVIEW: Implementing Cisco IP Routing (ROUTE) v2.0 is an instructor-led five day training course developed to help students prepare for Cisco CCNP _

More information

Cisco Certified Network Professional - Routing & Switching

Cisco Certified Network Professional - Routing & Switching Cisco Certified Network Professional - Routing & Switching Information Course Price 5,265 No. Vouchers: Course Code 0 Vouchers CCNP-RS No. Courses: 3 1/9 Implementing Cisco IP Routing Information Length:

More information

CCNP ROUTE 642-902. Official Certification Guide. Wendell Odom, CCIE No. 1624. Cisco Press. Indianapolis, IN 46240. 800 East 96th Street

CCNP ROUTE 642-902. Official Certification Guide. Wendell Odom, CCIE No. 1624. Cisco Press. Indianapolis, IN 46240. 800 East 96th Street CCNP ROUTE 642-902 Official Certification Guide Wendell Odom, CCIE No. 1624 Cisco Press 800 East 96th Street Indianapolis, IN 46240 IX Contents Foreword xxiv Introduction xxv Part I Perspectives on Network

More information

Cisco CCNP 642 901 Optimizing Converged Cisco Networks (ONT)

Cisco CCNP 642 901 Optimizing Converged Cisco Networks (ONT) Cisco CCNP 642 901 Optimizing Converged Cisco Networks (ONT) Course Number: 642 901 Length: 5 Day(s) Certification Exam This course will help you prepare for the following exams: Cisco CCNP Exam 642 901:

More information

200-101: Interconnecting Cisco Networking Devices Part 2 v2.0 (ICND2)

200-101: Interconnecting Cisco Networking Devices Part 2 v2.0 (ICND2) 200-101: Interconnecting Cisco Networking Devices Part 2 v2.0 (ICND2) Course Overview This course provides students with the knowledge and skills to successfully install, operate, and troubleshoot a small

More information

Interconnecting Cisco Networking Devices, Part 2 Course ICND2 v2.0; 5 Days, Instructor-led

Interconnecting Cisco Networking Devices, Part 2 Course ICND2 v2.0; 5 Days, Instructor-led Interconnecting Cisco Networking Devices, Part 2 Course ICND2 v2.0; 5 Days, Instructor-led Course Description The Interconnecting Cisco Networking Devices, Part 2 (ICND2) v2.0 course provides entry-level

More information

INTERCONNECTING CISCO NETWORKING DEVICES PART 2 V2.0 (ICND 2)

INTERCONNECTING CISCO NETWORKING DEVICES PART 2 V2.0 (ICND 2) INTERCONNECTING CISCO NETWORKING DEVICES PART 2 V2.0 (ICND 2) COURSE OVERVIEW: The Interconnecting Cisco Networking Devices, Part 2 (ICND2) v2.0 course provides entry-level network administrators, network

More information

Cisco Discovery 3: Introducing Routing and Switching in the Enterprise 157.8 hours teaching time

Cisco Discovery 3: Introducing Routing and Switching in the Enterprise 157.8 hours teaching time Essential Curriculum Computer Networking II Cisco Discovery 3: Introducing Routing and Switching in the Enterprise 157.8 hours teaching time Chapter 1 Networking in the Enterprise-------------------------------------------------

More information

Course Contents CCNP (CISco certified network professional)

Course Contents CCNP (CISco certified network professional) Course Contents CCNP (CISco certified network professional) CCNP Route (642-902) EIGRP Chapter: EIGRP Overview and Neighbor Relationships EIGRP Neighborships Neighborship over WANs EIGRP Topology, Routes,

More information

Interconnecting Cisco Networking Devices, Part 2 **Part of CCNA Route/Switch**

Interconnecting Cisco Networking Devices, Part 2 **Part of CCNA Route/Switch** Course: Interconnecting Cisco Networking Devices, Part 2 Duration: 5 Day Hands-On Lab & Lecture Course Price: $ 3,295.00 Learning Credits: 33 Certification: CCNA Route/Switch Description: The Interconnecting

More information

Understanding Route Redistribution & Filtering

Understanding Route Redistribution & Filtering Understanding Route Redistribution & Filtering When to Redistribute and Filter PAN-OS 5.0 Revision B 2013, Palo Alto Networks, Inc. www.paloaltonetworks.com Contents Overview... 3 Route Redistribution......

More information

Interconnecting Multiple OSPF Areas

Interconnecting Multiple OSPF Areas C H A P T E R 4 Interconnecting Multiple OSPF Areas This chapter introduces readers to the use, operation, configuration, and verification of Open Shortest Path First (OSPF) in multiple areas. After completing

More information

Date Submitted: 2-1-2014. Course Number: 9110

Date Submitted: 2-1-2014. Course Number: 9110 Date Submitted: 2-1-2014 Course Title: Advanced IPv6 Migration Course Number: 9110 Pricing & Length Classroom: 4 days, (onsite and public offering) Course Description: This advanced, hands-on course covers

More information

IP Routing Configuring RIP, OSPF, BGP, and PBR

IP Routing Configuring RIP, OSPF, BGP, and PBR 13 IP Routing Configuring RIP, OSPF, BGP, and PBR Contents Overview..................................................... 13-6 Routing Protocols.......................................... 13-6 Dynamic Routing

More information

Interconnecting Cisco Networking Devices: Accelerated Course CCNAX v2.0; 5 Days, Instructor-led

Interconnecting Cisco Networking Devices: Accelerated Course CCNAX v2.0; 5 Days, Instructor-led Interconnecting Cisco Networking Devices: Accelerated Course CCNAX v2.0; 5 Days, Instructor-led Course Description Interconnecting Cisco Networking Devices: Accelerated (CCNAX) v2.0 is a 60-hour instructor-led

More information

Transitioning to BGP. ISP Workshops. Last updated 24 April 2013

Transitioning to BGP. ISP Workshops. Last updated 24 April 2013 Transitioning to BGP ISP Workshops Last updated 24 April 2013 1 Scaling the network How to get out of carrying all prefixes in IGP 2 Why use BGP rather than IGP? p IGP has Limitations: n The more routing

More information

COURSE AGENDA. Lessons - CCNA. CCNA & CCNP - Online Course Agenda. Lesson 1: Internetworking. Lesson 2: Fundamentals of Networking

COURSE AGENDA. Lessons - CCNA. CCNA & CCNP - Online Course Agenda. Lesson 1: Internetworking. Lesson 2: Fundamentals of Networking COURSE AGENDA CCNA & CCNP - Online Course Agenda Lessons - CCNA Lesson 1: Internetworking Internetworking models OSI Model Discuss the OSI Reference Model and its layers Purpose and function of different

More information

Link-State Routing Protocols

Link-State Routing Protocols Link-State Routing Protocols Malin Bornhager Halmstad University Session Number 2002, Svenska-CNAP Halmstad University 1 Objectives Link-state routing protocol Single-area OSPF concepts Single-area OSPF

More information

"Charting the Course...

Charting the Course... Description "Charting the Course... Course Summary Interconnecting Cisco Networking Devices: Accelerated (CCNAX), is a course consisting of ICND1 and ICND2 content in its entirety, but with the content

More information

640-816: Interconnecting Cisco Networking Devices Part 2 v1.1

640-816: Interconnecting Cisco Networking Devices Part 2 v1.1 640-816: Interconnecting Cisco Networking Devices Part 2 v1.1 Course Introduction Course Introduction Chapter 01 - Small Network Implementation Introducing the Review Lab Cisco IOS User Interface Functions

More information

Module 12 Multihoming to the Same ISP

Module 12 Multihoming to the Same ISP Module 12 Multihoming to the Same ISP Objective: To investigate various methods for multihoming onto the same upstream s backbone Prerequisites: Module 11 and Multihoming Presentation The following will

More information

Interconnecting Cisco Networking Devices Part 2

Interconnecting Cisco Networking Devices Part 2 Interconnecting Cisco Networking Devices Part 2 Course Number: ICND2 Length: 5 Day(s) Certification Exam This course will help you prepare for the following exam: 640 816: ICND2 Course Overview This course

More information

CCNP CISCO CERTIFIED NETWORK PROFESSIONAL LAB MANUAL

CCNP CISCO CERTIFIED NETWORK PROFESSIONAL LAB MANUAL CCNP CISCO CERTIFIED NETWORK PROFESSIONAL LAB MANUAL VER 2.0 Page 1 of 315 ACKNOWLEDGEMENT We can write a 1000 page book, but we can t find enough words to describe the credit Mr. Siddiq Ahmed deserves

More information

Using the Border Gateway Protocol for Interdomain Routing

Using the Border Gateway Protocol for Interdomain Routing CHAPTER 12 Using the Border Gateway Protocol for Interdomain Routing The Border Gateway Protocol (BGP), defined in RFC 1771, provides loop-free interdomain routing between autonomous systems. (An autonomous

More information

GregSowell.com. Mikrotik Routing

GregSowell.com. Mikrotik Routing Mikrotik Routing Static Dynamic Routing To Be Discussed RIP Quick Discussion OSPF BGP What is Routing Wikipedia has a very lengthy explanation http://en.wikipedia.org/wiki/routing In the context of this

More information

Cisco Networking Professional-6Months Project Based Training

Cisco Networking Professional-6Months Project Based Training Cisco Networking Professional-6Months Project Based Training Core Topics Cisco Certified Networking Associate (CCNA) 1. ICND1 2. ICND2 Cisco Certified Networking Professional (CCNP) 1. CCNP-ROUTE 2. CCNP-SWITCH

More information

Using OSPF in an MPLS VPN Environment

Using OSPF in an MPLS VPN Environment Using OSPF in an MPLS VPN Environment Overview This module introduces the interaction between multi-protocol Border Gateway Protocol (MP-BGP) running between Provider Edge routers (s) and Open Shortest

More information

ASM Educational Center (ASM) Est. 1992

ASM Educational Center (ASM) Est. 1992 Cisco CCNP Routing and Switching Certification Course outline ROUTE v2.0 - Implementing Cisco IP Routing Module 1: Basic Network and Routing Concepts Lesson 1: Differentiating Routing Protocols Lesson

More information

Troubleshooting and Maintaining Cisco IP Networks Volume 1

Troubleshooting and Maintaining Cisco IP Networks Volume 1 Troubleshooting and Maintaining Cisco IP Networks Volume 1 Course Introduction Learner Skills and Knowledge Course Goal and E Learning Goal and Course Flow Additional Cisco Glossary of Terms Your Training

More information

Cisco Certified Network Associate Exam. Operation of IP Data Networks. LAN Switching Technologies. IP addressing (IPv4 / IPv6)

Cisco Certified Network Associate Exam. Operation of IP Data Networks. LAN Switching Technologies. IP addressing (IPv4 / IPv6) Cisco Certified Network Associate Exam Exam Number 200-120 CCNA Associated Certifications CCNA Routing and Switching Operation of IP Data Networks Operation of IP Data Networks Recognize the purpose and

More information

OSPF Version 2 (RFC 2328) Describes Autonomous Systems (AS) topology. Propagated by flooding: Link State Advertisements (LSAs).

OSPF Version 2 (RFC 2328) Describes Autonomous Systems (AS) topology. Propagated by flooding: Link State Advertisements (LSAs). OSPF Version 2 (RFC 2328) Interior gateway protocol (IGP). Routers maintain link-state database. Describes Autonomous Systems (AS) topology. Propagated by flooding: Link State Advertisements (LSAs). Router

More information

MPLS VPN over mgre. Finding Feature Information. Prerequisites for MPLS VPN over mgre

MPLS VPN over mgre. Finding Feature Information. Prerequisites for MPLS VPN over mgre The feature overcomes the requirement that a carrier support multiprotocol label switching (MPLS) by allowing you to provide MPLS connectivity between networks that are connected by IP-only networks. This

More information

Table of Contents. Cisco How Does Load Balancing Work?

Table of Contents. Cisco How Does Load Balancing Work? Table of Contents How Does Load Balancing Work?...1 Document ID: 5212...1 Introduction...1 Prerequisites...1 Requirements...1 Components Used...1 Conventions...1 Load Balancing...1 Per Destination and

More information

Interconnecting Cisco Network Devices 1 Course, Class Outline

Interconnecting Cisco Network Devices 1 Course, Class Outline www.etidaho.com (208) 327-0768 Interconnecting Cisco Network Devices 1 Course, Class Outline 5 Days Interconnecting Cisco Networking Devices, Part 1 (ICND1) v2.0 is a five-day, instructorled training course

More information

Networking. Palo Alto Networks. PAN-OS Administrator s Guide Version 6.0. Copyright 2007-2015 Palo Alto Networks

Networking. Palo Alto Networks. PAN-OS Administrator s Guide Version 6.0. Copyright 2007-2015 Palo Alto Networks Networking Palo Alto Networks PAN-OS Administrator s Guide Version 6.0 Contact Information Corporate Headquarters: Palo Alto Networks 4401 Great America Parkway Santa Clara, CA 95054 www.paloaltonetworks.com/company/contact-us

More information

INTERCONNECTING CISCO NETWORK DEVICES PART 1 V2.0 (ICND 1)

INTERCONNECTING CISCO NETWORK DEVICES PART 1 V2.0 (ICND 1) INTERCONNECTING CISCO NETWORK DEVICES PART 1 V2.0 (ICND 1) COURSE OVERVIEW: Interconnecting Cisco Networking Devices, Part 1 (ICND1) v2.0 is a five-day, instructor-led training course that teaches learners

More information

CCNA 2 v5.0 Routing Protocols Final Exam Answers

CCNA 2 v5.0 Routing Protocols Final Exam Answers CCNA 2 v5.0 Routing Protocols Final Exam Answers 1 Refer to the exhibit. What can be concluded about network 192.168.1.0 in the R2 routing table? This network was learned through summary LSAs from an ABR.*

More information

Interconnecting Cisco Networking Devices: Accelerated (CCNAX) 2.0(80 Hs) 1-Interconnecting Cisco Networking Devices Part 1 (40 Hs)

Interconnecting Cisco Networking Devices: Accelerated (CCNAX) 2.0(80 Hs) 1-Interconnecting Cisco Networking Devices Part 1 (40 Hs) Interconnecting Cisco Networking Devices: Accelerated (CCNAX) 2.0(80 Hs) 1-Interconnecting Cisco Networking Devices Part 1 (40 Hs) 2-Interconnecting Cisco Networking Devices Part 2 (40 Hs) 1-Interconnecting

More information

Route Optimization. rek. 2005 Petr Grygarek, VSB-TU Ostrava, Routed and Switched Networks 1

Route Optimization. rek. 2005 Petr Grygarek, VSB-TU Ostrava, Routed and Switched Networks 1 Route Optimization (intra-as) Petr Grygárek rek 1 Goal of route optimization Static routing: More predictable and safer Dynamic routing: Automatically ally reacts on topology changes Lower administration

More information

Router and Routing Basics

Router and Routing Basics Router and Routing Basics Malin Bornhager Halmstad University Session Number 2002, Svenska-CNAP Halmstad University 1 Routing Protocols and Concepts CCNA2 Routing and packet forwarding Static routing Dynamic

More information

MPLS. Cisco MPLS. Cisco Router Challenge 227. MPLS Introduction. The most up-to-date version of this test is at: http://networksims.com/i01.

MPLS. Cisco MPLS. Cisco Router Challenge 227. MPLS Introduction. The most up-to-date version of this test is at: http://networksims.com/i01. MPLS Cisco MPLS MPLS Introduction The most up-to-date version of this test is at: http://networksims.com/i01.html Cisco Router Challenge 227 Outline This challenge involves basic frame-mode MPLS configuration.

More information

Welcome to Todd Lammle s CCNA Bootcamp

Welcome to Todd Lammle s CCNA Bootcamp Welcome to Todd Lammle s CCNA Bootcamp Todd Lammle Cisco Authorized CCNA Bootcamps are now available, delivered by CCSI instructor, and popular Sybex author Todd Lammle. Todd Lammle CCNA Training Boot

More information

Introduction about cisco company and its products (network devices) Tell about cisco offered courses and its salary benefits (ccna ccnp ccie )

Introduction about cisco company and its products (network devices) Tell about cisco offered courses and its salary benefits (ccna ccnp ccie ) CCNA Introduction about cisco company and its products (network devices) Tell about cisco offered courses and its salary benefits (ccna ccnp ccie ) Inform about ccna its basic course of networking Emergence

More information

OSPF Configuring Multi-Area OSPF

OSPF Configuring Multi-Area OSPF OSPF Configuring Multi-Area OSPF Objective In this lab configure a multiarea OSPF operation, interarea summarization, external route summarization, and default routing. Scenario International Travel Agency

More information

Border Gateway Protocol (BGP)

Border Gateway Protocol (BGP) Border Gateway Protocol (BGP) Petr Grygárek rek 1 Role of Autonomous Systems on the Internet 2 Autonomous systems Not possible to maintain complete Internet topology information on all routers big database,

More information

OSPF Routing Protocol

OSPF Routing Protocol OSPF Routing Protocol Contents Introduction Network Architecture Campus Design Architecture Building Block Design Server Farm Design Core Block Design WAN Design Architecture Protocol Design Campus Design

More information

100-101: Interconnecting Cisco Networking Devices Part 1 v2.0 (ICND1)

100-101: Interconnecting Cisco Networking Devices Part 1 v2.0 (ICND1) 100-101: Interconnecting Cisco Networking Devices Part 1 v2.0 (ICND1) Course Overview This course provides students with the knowledge and skills to implement and support a small switched and routed network.

More information

Chapter 1 Implement EIGRP operations... 2. Chapter 2 Implement multiarea OSPF operations... 18. Chapter 4 Implement Cisco IOS routing features...

Chapter 1 Implement EIGRP operations... 2. Chapter 2 Implement multiarea OSPF operations... 18. Chapter 4 Implement Cisco IOS routing features... Table of Contents Chapter 1... 2 94 106 Chapter 2 Implement multiarea OSPF operations... 18 96 120 Chapter 3 Describe integrated IS-IS... 30 97 130 Chapter 4 Implement Cisco IOS routing features... 48

More information

Configuring RIP. Overview. Routing Update Process CHAPTER

Configuring RIP. Overview. Routing Update Process CHAPTER CHAPTER 22 This chapter describes how to configure the ASA to route data, perform authentication, and redistribute routing information, using the Routing Information Protocol (RIP) routing protocol. This

More information

Implementing Cisco Service Provider Next-Generation Edge Network Services **Part of the CCNP Service Provider track**

Implementing Cisco Service Provider Next-Generation Edge Network Services **Part of the CCNP Service Provider track** Course: Duration: Price: $ 3,695.00 Learning Credits: 37 Certification: Implementing Cisco Service Provider Next-Generation Edge Network Services Implementing Cisco Service Provider Next-Generation Edge

More information

Description: Objective: Upon completing this course, the learner will be able to meet these overall objectives:

Description: Objective: Upon completing this course, the learner will be able to meet these overall objectives: Course: Building Cisco Service Provider Next-Generation Networks, Part 2 Duration: 5 Day Hands-On Lab & Lecture Course Price: $ 3,750.00 Learning Credits: 38 Description: The Building Cisco Service Provider

More information

Table of Contents. Cisco Configuring a Basic MPLS VPN

Table of Contents. Cisco Configuring a Basic MPLS VPN Table of Contents Configuring a Basic MPLS VPN...1 Introduction...1 Prerequisites...1 Requirements...1 Components Used...2 Related Products...2 Conventions...2 Configure...3 Network Diagram...3 Configuration

More information

CCIE R&S Lab Workbook Volume I Version 5.0

CCIE R&S Lab Workbook Volume I Version 5.0 Copyright Information, Inc. All rights reserved. The following publication, CCIE R&S Lab Workbook Volume I Version 5.0, was developed by Internetwork Expert, Inc. All rights reserved. No part of this publication

More information

Deploying OSPF for ISPs. OSPF Design. Agenda. Service Providers. SP Architecture. SP Architecture. OSPF Design in SP Networks

Deploying OSPF for ISPs. OSPF Design. Agenda. Service Providers. SP Architecture. SP Architecture. OSPF Design in SP Networks Agenda OSPF Design in SP Networks Deploying OSPF for ISPs Adding Networks in OSPF OSPF in IOS ISP/IXP 1 2 Service Providers OSPF Design As applicable to Service Provider Networks SP networks are divided

More information

Implementing Secured Converged Wide Area Networks (ISCW) Version 1.0

Implementing Secured Converged Wide Area Networks (ISCW) Version 1.0 COURSE OVERVIEW Implementing Secure Converged Wide Area Networks (ISCW) v1.0 is an advanced instructor-led course that introduces techniques and features that enable or enhance WAN and remote access solutions.

More information

PRASAD ATHUKURI Sreekavitha engineering info technology,kammam

PRASAD ATHUKURI Sreekavitha engineering info technology,kammam Multiprotocol Label Switching Layer 3 Virtual Private Networks with Open ShortestPath First protocol PRASAD ATHUKURI Sreekavitha engineering info technology,kammam Abstract This paper aims at implementing

More information

BSCI Chapter 1. 2006 Cisco Systems, Inc. All rights reserved.

BSCI Chapter 1. 2006 Cisco Systems, Inc. All rights reserved. BSCI Chapter 1 This lesson starts by introducing the network as the platform for the Information age. The Cisco vision i of the future Intelligent t Information Network (IIN) and the Service-Oriented Network

More information

DEGREE THESIS. Improving Network Performance by Implementing the Path Control Tools. Derick Kolle Nduge, Augustine Chika, Mohammednur Ibrahim

DEGREE THESIS. Improving Network Performance by Implementing the Path Control Tools. Derick Kolle Nduge, Augustine Chika, Mohammednur Ibrahim Network Design and Computer Management, 120 HP DEGREE THESIS Improving Network Performance by Implementing the Path Control Tools Derick Kolle Nduge, Augustine Chika, Mohammednur Ibrahim Network Project

More information

LAIKIPIA UNIVERSITY CISCO ACADEMY BRONCHURE

LAIKIPIA UNIVERSITY CISCO ACADEMY BRONCHURE CISCO COURSES LAIKIPIA UNIVERSITY CISCO ACADEMY BRONCHURE Cisco/CompTIA IT Essentials (PC Hardware and Software) The IT Essentials course provides hand-on training on computer hardware and software skills

More information

CCNA2 Chapter 11 Practice

CCNA2 Chapter 11 Practice CCNA2 Chapter 11 Practice Two neighbouring routers are configured for OSPF, but they have different hello and dead intervals. What will happen? They will become adjacent as long as they are configured

More information

Implementing Cisco MPLS

Implementing Cisco MPLS Implementing Cisco MPLS Course MPLS v2.3; 5 Days, Instructor-led Course Description This design document is for the refresh of the Implementing Cisco MPLS (MPLS) v2.3 instructor-led training (ILT) course,

More information

Border Gateway Protocol (BGP-4)

Border Gateway Protocol (BGP-4) Vanguard Applications Ware IP and LAN Feature Protocols Border Gateway Protocol (BGP-4) Notice 2008 Vanguard Networks 25 Forbes Blvd Foxboro, MA 02035 Phone: (508) 964 6200 Fax: (508) 543 0237 All rights

More information

ISOM3380 Advanced Network Management. Spring 2014 15. Course Description

ISOM3380 Advanced Network Management. Spring 2014 15. Course Description ISOM3380 Advanced Network Management Spring 2014 15 Course Description In an interconnected economy, management of network applications becomes increasingly important. This course helps students develop

More information

BGP Terminology, Concepts, and Operation. Chapter 6 2007 2010, Cisco Systems, Inc. All rights reserved. Cisco Public

BGP Terminology, Concepts, and Operation. Chapter 6 2007 2010, Cisco Systems, Inc. All rights reserved. Cisco Public BGP Terminology, Concepts, and Operation 1 IGP versus EGP Interior gateway protocol (IGP) A routing protocol operating within an Autonomous System (AS). RIP, OSPF, and EIGRP are IGPs. Exterior gateway

More information

IMPLEMENTING CISCO MPLS V2.3 (MPLS)

IMPLEMENTING CISCO MPLS V2.3 (MPLS) IMPLEMENTING CISCO MPLS V2.3 (MPLS) COURSE OVERVIEW: The course will enable learners to gather information from the technology basics to advanced VPN configuration. The focus of the course is on VPN technology

More information

Configuring Border Gateway Protocol in AOS for Releases Prior to 18.03.00/R10.1.0

Configuring Border Gateway Protocol in AOS for Releases Prior to 18.03.00/R10.1.0 61200860L1-29.4E March 2012 Configuration Guide Configuring Border Gateway Protocol in AOS for Releases Prior to 18.03.00/R10.1.0 This guide only addresses BGP in AOS data products using AOS firmware prior

More information

Route Discovery Protocols

Route Discovery Protocols Route Discovery Protocols Columbus, OH 43210 Jain@cse.ohio-State.Edu http://www.cse.ohio-state.edu/~jain/ 1 Overview Building Routing Tables Routing Information Protocol Version 1 (RIP V1) RIP V2 OSPF

More information

Designing Cisco Network Service Architectures ARCH v2.1; 5 Days, Instructor-led

Designing Cisco Network Service Architectures ARCH v2.1; 5 Days, Instructor-led Designing Cisco Network Service Architectures ARCH v2.1; 5 Days, Instructor-led Course Description The Designing Cisco Network Service Architectures (ARCH) v2.1 course is a five-day instructor-led course.

More information

Fireware How To Dynamic Routing

Fireware How To Dynamic Routing Fireware How To Dynamic Routing How do I configure my Firebox to use BGP? Introduction A routing protocol is the language a router speaks with other routers to share information about the status of network

More information

Routing with OSPF. Introduction

Routing with OSPF. Introduction Routing with OSPF Introduction The capabilities of an internet are largely determined by its routing protocol. An internet's scalability, its ability to quickly route around failures, and the consumption

More information

Monitoring Routing. Monitoring OSPF LSAs. Type 1 CHAPTER

Monitoring Routing. Monitoring OSPF LSAs. Type 1 CHAPTER 44 CHAPTER You can use ASDM to monitor OSPF LSAs, OSPF and EIGRP neighbors, and the routing table. To access the routing monitoring screens, go to Monitoring > Routing in the ASDM interface. This section

More information

Chapter 2 Lab 2-2, EIGRP Load Balancing

Chapter 2 Lab 2-2, EIGRP Load Balancing Chapter 2 Lab 2-2, EIGRP Load Balancing Topology Objectives Background Review a basic EIGRP configuration. Explore the EIGRP topology table. Identify successors, feasible successors, and feasible distances.

More information

s@lm@n Juniper Exam JN0-343 Juniper Networks Certified Internet Specialist (JNCIS-ENT) Version: 10.1 [ Total Questions: 498 ]

s@lm@n Juniper Exam JN0-343 Juniper Networks Certified Internet Specialist (JNCIS-ENT) Version: 10.1 [ Total Questions: 498 ] s@lm@n Juniper Exam JN0-343 Juniper Networks Certified Internet Specialist (JNCIS-ENT) Version: 10.1 [ Total Questions: 498 ] Topic 1, Volume A Question No : 1 - (Topic 1) How much overhead does the GRE

More information

Cisco 12 CCNA Certification

Cisco 12 CCNA Certification Cisco 12 CCNA Certification Application for Board Authorization of Courses District: Chilliwack School District 33 Developed by: John Murtha Date: May7, 2004 School: Sardis Secondary Principal: Bob Patterson

More information

Advanced BGP Policy. Advanced Topics

Advanced BGP Policy. Advanced Topics Advanced BGP Policy George Wu TCOM690 Advanced Topics Route redundancy Load balancing Routing Symmetry 1 Route Optimization Issues Redundancy provide multiple alternate paths usually multiple connections

More information

IOS NAT Load Balancing for Two ISP Connections

IOS NAT Load Balancing for Two ISP Connections IOS NAT Load Balancing for Two ISP Connections Document ID: 100658 Contents Introduction Prerequisites Requirements Components Used Conventions Configure Network Diagram Configurations Verify Troubleshoot

More information

IPv6 over MPLS VPN. Contents. Prerequisites. Document ID: 112085. Requirements

IPv6 over MPLS VPN. Contents. Prerequisites. Document ID: 112085. Requirements IPv6 over MPLS VPN Document ID: 112085 Contents Introduction Prerequisites Requirements Components Used Conventions Configure Network Diagram VRF Configuration Multiprotocol BGP (MP BGP) Configuration

More information

s@lm@n Cisco Exam 400-201 CCIE Service Provider Written Exam Version: 7.0 [ Total Questions: 107 ]

s@lm@n Cisco Exam 400-201 CCIE Service Provider Written Exam Version: 7.0 [ Total Questions: 107 ] s@lm@n Cisco Exam 400-201 CCIE Service Provider Written Exam Version: 7.0 [ Total Questions: 107 ] Cisco 400-201 : Practice Test Question No : 1 Which two frame types are correct when configuring T3 interfaces?

More information

Disaster Recovery Design Ehab Ashary University of Colorado at Colorado Springs

Disaster Recovery Design Ehab Ashary University of Colorado at Colorado Springs Disaster Recovery Design Ehab Ashary University of Colorado at Colorado Springs As a head of the campus network department in the Deanship of Information Technology at King Abdulaziz University for more

More information

ICT Infrastructure & Network Management

ICT Infrastructure & Network Management Context ICT Infrastructure & Network Management Postgraduate Degree Programme Hogeschool-Universiteit Brussel 2014-2015 The HUB University College offers a wide range of postgraduate and other courses

More information

Chapter 6: Implementing a Border Gateway Protocol Solution for ISP Connectivity

Chapter 6: Implementing a Border Gateway Protocol Solution for ISP Connectivity : Implementing a Border Gateway Protocol Solution for ISP Connectivity CCNP ROUTE: Implementing IP Routing ROUTE v6 1 Objectives Describe basic BGP terminology and operation, including EBGP and IBGP. Configure

More information

ITRI CCL. IP Routing Primer. Paul C. Huang, Ph.D. ITRI / CCL / N300. CCL/N300; Paul Huang 1999/6/2 1

ITRI CCL. IP Routing Primer. Paul C. Huang, Ph.D. ITRI / CCL / N300. CCL/N300; Paul Huang 1999/6/2 1 IP Routing Primer Paul C. Huang, Ph.D. ITRI / / N300 /N300; Paul Huang 1999/6/2 1 Basic Addressing / Subnetting Class A 0 Network Host Host Host 127 networks / 16,777,216 hosts Class A natural mask 255.0.0.0

More information

BGP Support for IP Prefix Import from Global Table into a VRF Table

BGP Support for IP Prefix Import from Global Table into a VRF Table BGP Support for IP Prefix Import from Global Table into a VRF Table The BGP Support for IP Prefix Import from Global Table into a VRF Table feature introduces the capability to import IPv4 unicast prefixes

More information

IMPLEMENTING CISCO MPLS V3.0 (MPLS)

IMPLEMENTING CISCO MPLS V3.0 (MPLS) IMPLEMENTING CISCO MPLS V3.0 (MPLS) COURSE OVERVIEW: Multiprotocol Label Switching integrates the performance and traffic-management capabilities of data link Layer 2 with the scalability and flexibility

More information

ZXR10 5900/5200 Series

ZXR10 5900/5200 Series ZXR10 5900/5200 Series All Gigabit-Port Intelligent Routing Switch User Manual (IPv4 Routing Volume) Version 2.8.23.A ZTE CORPORATION ZTE Plaza, Keji Road South, Hi-Tech Industrial Park, Nanshan District,

More information

MPLS VPN Route Target Rewrite

MPLS VPN Route Target Rewrite The feature allows the replacement of route targets on incoming and outgoing Border Gateway Protocol (BGP) updates Typically, Autonomous System Border Routers (ASBRs) perform the replacement of route targets

More information

Introduction to Dynamic Routing Protocols

Introduction to Dynamic Routing Protocols CHAPTER 3 Introduction to Dynamic Routing Protocols Objectives Upon completion of this chapter, you should be able to answer the following questions: Can you describe the role of dynamic routing protocols

More information

Switching Basics and Intermediate Routing CCNA 3 Labs and Study Guide Allan Johnson

Switching Basics and Intermediate Routing CCNA 3 Labs and Study Guide Allan Johnson Switching Basics and Intermediate Routing CCNA 3 Labs and Allan Johnson Introduction Switching Basics and Intermediate Routing CCNA 3 Labs and s is a supplement to your classroom and laboratory experience

More information

Chapter 10 Link-State Routing Protocols

Chapter 10 Link-State Routing Protocols Chapter 10 Link-State Routing Protocols CCNA2-1 Chapter 10 Note for Instructors These presentations are the result of a collaboration among the instructors at St. Clair College in Windsor, Ontario. Thanks

More information

WANs and Routers. M.Sc. Aleksandra Kanevce M.Sc. Aleksandra Bogojeska

WANs and Routers. M.Sc. Aleksandra Kanevce M.Sc. Aleksandra Bogojeska WANs and Routers M.Sc. Aleksandra Kanevce M.Sc. Aleksandra Bogojeska 1 Introduction to WANs A WAN is a data communications network that spans a large geographic area such as a state, province, or country.

More information

IPv6 Fundamentals, Design and Deployment

IPv6 Fundamentals, Design and Deployment IPv6 Fundamentals, Design and Deployment Duration: 5 Days Course Code: IP6FD Version: 3.0 Delivery Method: Virtual Learning Overview: This five-day course provides network engineers and technicians who

More information

Layer 3 Routing User s Manual

Layer 3 Routing User s Manual User s Manual Second Edition, July 2011 www.moxa.com/product 2011 Moxa Inc. All rights reserved. User s Manual The software described in this manual is furnished under a license agreement and may be used

More information

- Route Filtering and Route-Maps -

- Route Filtering and Route-Maps - 1 Prefix-Lists - Route Filtering and Route-Maps - Prefix-lists are used to match routes as opposed to traffic. Two things are matched: The prefix (the network itself) The prefix-length (the length of the

More information

Interdomain Routing. Project Report

Interdomain Routing. Project Report Interdomain Routing Project Report Network Infrastructure improvement proposal To Company A Team 4: Zhang Li Bin Yang Md. Safiqul Islam Saurabh Arora Network Infrastructure Improvement Interdomain routing

More information

Configure ISDN Backup and VPN Connection

Configure ISDN Backup and VPN Connection Case Study 2 Configure ISDN Backup and VPN Connection Cisco Networking Academy Program CCNP 2: Remote Access v3.1 Objectives In this case study, the following concepts are covered: AAA authentication Multipoint

More information

Interconnecting Cisco Networking Devices, Part 1 (ICND1) v3.0

Interconnecting Cisco Networking Devices, Part 1 (ICND1) v3.0 Interconnecting Cisco Networking Devices, Part 1 (ICND1) v3.0 COURSE OVERVIEW: Interconnecting Cisco Networking Devices, Part 1 (ICND1) v3.0 is a five-day, instructor-led training course that teaches learners

More information