The Technical Legacy of the CEMA Engineering Conference

Size: px
Start display at page:

Download "The Technical Legacy of the CEMA Engineering Conference"

Transcription

1 The CEMA Engineering Conference meets each June. Its purpose is to develop, and keep relevant, the technical documents that support the needs of the Conveying Industry. It has been doing so since The following pages summarize most, if not all, of the technical products that it has developed in support of the needs of the Conveying Industry Members attending the upcoming Engineering Conference will continue to preserve and enhance that proud legacy.

2 Developed and Maintained by the General Bulk Handling Section Members CEMA STANDARD No. 102, "CONVEYOR TERMS & DEFINITIONS" When the Conveyor Equipment Manufacturers Association (CEMA) was formed in 1933, one of the first things they discovered that there were no common terms and agreed upon definitions for any equipment or products in the industry. It took them eight years to develop the first edition, just in time for World War II. The common terms and definitions were influential in helping standardize the conveying and other material handling activities in the war mobilization and in the industrial expansion after World War II. They have since been adopted for use nationally and internationally and have contributed to the common worldwide language of the global material handling and distribution system we enjoy today. This standard has indeed made a difference. CEMA BROCHURE No. 201, "SAFETY LABEL BROCHURE" This document was developed to begin the CEMA Standardized Safety Label Program. Danger, Warning, and Caution Safety Labels were developed to identify known potential hazards associated with human operation in and around conveying equipment. It also includes Safety Label Placement Guidelines for guidance on what labels, and where, to apply on specific equipment. BULK BELT CONVEYORS "BELT CONVEYORS FOR BULK MATERIALS", Sixth Edition This book is considered by many to be the belt conveyor industry basic handbook. It details subject areas critical to selecting bulk handling belt conveyors. Contains photographs of equipment, including line drawings, formulas, and easy to use tables. This manual is written for the experienced engineer, the recent graduate, consultants, professionals, and all who must design or approve projects involving the handling of bulk materials with belt conveyor systems. CEMA STANDARD No. 550, "CLASSIFICATION AND DEFINITIONS OF BULK MATERIALS" Presents materials classifications with physical characteristics of each, hazards that affect conveyability, along with suggested test procedures to aid the establishment of criteria for selection of conveying machinery and ancillary equipment. CONVEYOR INSTALLATION STANDARDS FOR BELT CONVEYORS HANDLING BULK MATERIALS This book outlines minimum installation standards for installation of bulk conveyors and provides suggestions for meeting or exceeding these standards. Bulk Belt Conveyors BH 1 CEMA SAFETY BEST PRACTICE 001 Design and Safe Application of Conveyor Crossovers for Unit Handling Conveyors Free Download CEMA TECHNICAL REPORT Noise Considerations for Conveyor System Design and Application Free Download

3 BULK BELT CONVEYOR ACCESSORIES CEMA STANDARD No. 575, "BULK MATERIAL BELT CONVEYOR IMPACT BED CRADLE Selection and Dimensions" Dimensional standards and selection guidelines for Impact Beds/Cradles to insure that they are dimensionally compatible with the most current version of CEMA Standard No 502, "Bulk Material Belt Conveyor Troughing and Return Idlers Selection and Dimensions." Bulk Belt Conveyor Accessories BH 2 IDLERS CEMA STANDARD No. 502 "BULK MATERIAL BELT CONVEYOR TROUGHING AND RETURN IDLERS Selection and Dimensions" This book provides dimensional standards and selection guidelines for 20 degree, 35 degree, and 45 degree troughing idlers and return rollers, 10 degree and 15 degree vee returns. Newest items include addition of CEMA Class "F" Idlers. PULLEYS CEMA STANDARD No. B105.1, "SPECIFICATIONS FOR WELDED STEEL CONVEYOR PULLEYS WITH COMPRESSION TYPE HUBS" These pulleys have a continuous rim and two end discs, each with a compression type hub to provide a clamp fit on the shaft. This ANSI/CEMA Standard provides recommended load ratings, dimensional information, and criteria for selection of welded steel conveyor pulleys with compression type hubs. CEMA STANDARD No , "SPECIFICATIONS FOR WELDED STEEL WING PULLEYS" Welded steel wing pulleys have a number of steel wing plates that extend radially from the longitudinal axis of two compression type hub assemblies and are equally spaced about the pulley circumference. This ANSI/CEMA Standard provides recommended load ratings, dimensional information, and criteria for selection of welded steel wing pulleys. Bulk Conveyors, Bulk Conveyor Accessories See Above. Additional Guidelines: Pneumatic Conveying Rotary Valve PN 1 Pressure Tanks PN 2 Pneumatic Fans PN 3

4 Developed and Maintained by the Screw Conveyor Section Members CEMA STANDARD No. 102, "CONVEYOR TERMS & DEFINITIONS" When the Conveyor Equipment Manufacturers Association (CEMA) was formed in 1933, one of the first things they discovered that there were no common terms and agreed upon definitions for any equipment or products in the industry. It took them eight years to develop the first edition, just in time for World War II. The common terms and definitions were influential in helping standardize the conveying and other material handling activities in the war mobilization and in the industrial expansion after World War II. They have since been adopted for use nationally and internationally and have contributed to the common worldwide language of the global material handling and distribution system we enjoy today. This standard has indeed made a difference. CEMA BROCHURE No. 201, "SAFETY LABEL BROCHURE" This document was developed to begin the CEMA Standardized Safety Label Program. Danger, Warning, and Caution Safety Labels were developed to identify known potential hazards associated with human operation in and around conveying equipment. It also includes Safety Label Placement Guidelines for guidance on what labels, and where, to apply on specific equipment. SCREW CONVEYORS CEMA STANDARD No. 300, "SCREW CONVEYOR DIMENSIONAL STANDARDS" This book consists of a series of 34 recommended dimensional standards for major screw conveyor components. Included are tables for troughs, trough ends and covers, screws (helicoid, sectional flight, cut flight, cut and folded flight, ribbon flight), plain discharge spouts. CEMA STANDARD No. 350, "SCREW CONVEYORS" This is a book of acceptable engineering and application practice as compiled by engineers of leading screw conveyor manufacturing companies based on the experience of many years. The book is profusely illustrated and contains much tabular data on conveyor selection and handling characteristics of the materials ordinarily handled in screw conveyors. Attention is given to horizontal, inclined, vertical and a number of special types of screw conveyors, both for straight handling and for processing. CEMA STANDARD , "VARIABLE FREQUENCY DRIVE SELECTION FOR SCREW FEEDERS" Free Download This document provides consensus best practices for the following procedures: Procedure for Calculating Demand Horsepower for Screw Feeders and Procedure for Procedure for Determining Inverter Size for Screw Feeders (Standard is based on 230/460 volt, 3 phase motors), as well as Other Factors to Consider. CEMA A/V Number 6 "SCREW CONVEYOR, DRAG CONVEYOR, AND BUCKET ELEVATOR SAFETY CD". This CD describes key safety practices people should adhere to when working with and around Screw Conveyors, Drag Conveyors, and Bucket Elevators. It also includes CEMA Safety Label Placement Guidelines, the handout WARNING AND SAFETY REMINDERS FOR SCREW, DRAG, AND BUCKET ELEVATOR CONVEYORS, a printable version of the Screw Conveyor Safety Poster, and other information.

5 SAFETY LABELS, PLACEMENT GUIDELINES, SAFETY POSTERS, SAFETY VIDEO These items form the basis of a coherent and comprehensive industry standard conveyor safety program that identifies standard hazards associated with conveyor equipment as it is shipped from the factory. Other hazards may exist where the equipment is installed. Those are to be identified by the user. Drag Conveyors SC 1 Screw Conveyors SC 2 Vertical Screw Conveyors SC 3 Bucket Conveyors SC 4 CEMA SAFETY POSTERS These Free, Downloadable, Safety Posters have been developed around twelve safety tips and are coordinated with the messages and icons on the CEMA Safety Labels and Placement Guidelines. Screw Conveyor Safety Poster Bucket Elevator Safety Poster WARNING AND SAFETY REMINDERS FOR SCREW, DRAG, AND BUCKET ELEVATORS This document is a standardized list of safety reminders, cautions, warnings, and best practices associated with safe operation at or near these conveyors. It was drawn from the various safety inserts that member manufacturers were using. It was designed as an industry standard insert to be downloaded and printed by each manufacturer and shipped with each conveyor as an industry wide standard safety practice. Free Download

6 Developed and Maintained by the Unit Handling Conveying Section Members CEMA STANDARD No. 102, "CONVEYOR TERMS & DEFINITIONS" When the Conveyor Equipment Manufacturers Association was formed in 1933, one of the first things they discovered was that there were no common terms and agreed upon definitions for any equipment or products in the industry. It took them eight years to develop the first edition, just in time for World War II. The common terms and definitions were influential in helping standardize the conveying and other material handling activities in the war mobilization and in the industrial expansion after World War II. They have since been adopted for use nationally and internationally and have contributed to the common worldwide language of the global material handling and distribution system we enjoy today. CEMA BROCHURE No. 201, "SAFETY LABEL BROCHURE" This document was developed to begin the CEMA Standardized Safety Label Program. Danger, Warning, and Caution Safety Labels were developed to identify known potential hazards associated with human operation in and around conveying equipment. It also includes Safety Label Placement Guidelines for guidance on what labels, and where, to apply on specific equipment. CEMA APPLICATION GUIDE FOR UNIT HANDLING CONVEYORS This 570 page book was completed in 2009 after four years of collaboration among CEMA member companies. It is the only in depth guide in the world for design details and application guidance for Unit Handling Conveyors. It contains information on all Unit Handling Conveyors, Pallets, Cartons, Totes, Monorail, Etc., as well as common components and accessories. It incorporates some of the content of CEMA's Unit Handling Conveyor Standards. CEMA STANDARD No. 401, "ROLLER CONVEYORS NON POWERED" This is the first in a series of standards applying to unit handling conveyors. It establishes recommended engineering and application practice for this type of equipment, offers a uniform nomenclature and certain dimensional standards. CEMA STANDARD No. 402, "BELT CONVEYORS" This standard establishes recommended design and application engineering practice for unit handling belt conveyors. It includes uniform nomenclature and certain dimensional standards. CEMA STANDARD No. 403, "BELT DRIVEN LIVE ROLLER CONVEYORS" This standard establishes recommended design and application engineering practice for this popular type of conveyor. CEMA STANDARD No. 404, "CHAIN DRIVEN LIVE ROLLER CONVEYORS" This standard establishes recommended design and application engineering practice for a second form of live roller conveyor. CEMA STANDARD No. 405, "SLAT CONVEYORS" This standard proposes certain minimum standards for use in the design and application of unit handling slat conveyors. Formulas and tables are included to aid the engineer. CEMA STANDARD No. 406, "LINESHAFT DRIVEN LIVE ROLLER CONVEYORS" This standard establishes recommended minimum standards for use in manufacturing and applying lineshaft live roll conveyors.

7 CEMA STANDARD No. 601, "OVERHEAD TROLLEY CHAIN CONVEYORS" This standard represents a consensus of trolley conveyor manufacturers established dimensions for x 348, x 458, and x 678 rivetless chains, vertical and horizontal bolt trolleys, trolley attachments, roller turn rollers, roller turns and traction wheel turns. CEMA SAFETY BEST PRACTICE 001 Design and Safe Application of Conveyor Crossovers for Unit Handling Conveyors Self explanatory Free Download CEMA SAFETY BEST PRACTICE 002 E Stop Application Guide for Unit and Bulk Belt Conveyors Self explanatory Free Download CEMA TECHNICAL REPORT Noise Considerations for Conveyor System Design and Application Self explanatory Free Download SAFETY LABELS, PLACEMENT GUIDELINES, SAFETY POSTERS, SAFETY VIDEO These form the basis of a coherent and comprehensive industry standard conveyor safety program that identifies standard hazards associated with conveyor equipment as it is shipped from the factory. Other hazards may exist where the equipment is installed. Those are to be identified by the user. Roller & Wheel Conveyor (Non Powered UH 1 U End Driven Belt Conveyors UH 2 Center Driven Belt Conveyors UH 3 Belt Driven Live Roller Conveyors UH 4 Chain Driven Live Roller Conveyors UH 5 Slat Conveyors UH 6 Lineshaft Conveyors UH 7 Palletizers PL 1 CEMA SAFETY POSTERS Free, Downloadable Safety Posters have been developed around twelve safety tips and are coordinated with the messages and icons on the CEMA Safety Labels. Package Conveyor Safety Posters Baggage Handling Conveyor Safety Posters CEMA A/V Number 4 "SAFETY GUIDELINES FOR UNIT HANDLING CONVEYORS" DVD This 11 minute DVD provides 12 safety rules and lessons for safer operation and maintenance of unit handling conveyors. The lessons are tied to the, free for download, CEMA Unit Handling Safety Posters and Unit Handling Safety Label Placement Guidelines. CONVEYOR CHAINS CONVEYOR CHAIN FACT SHEET , "CRITICAL PIN REDUCING FATIGUE FAILURES" Free Download CONVEYOR CHAIN FACT SHEET , "ENGINEERING CLASS AND ROLLER CHAINS There is a difference" Free Download CONVEYOR CHAIN FACT SHEET , "COMMON SENSE FACTS ABOUT CHAIN DESIGN, MAINTENANCE AND USES" Free Download

Manual piston sampler...m 11

Manual piston sampler...m 11 SAMPLING Manual piston sampler...m 11 Screw sampler...prec 22...PREC 100 Slide sampler...pr 55 Rotative screw sampler...prv Piston sampler...p 11 Sampler on belt conveyor...pba Rotating cup sampler...pgr

More information

Cement Processing Overview. Power Transmission Products & Solutions for Cement Processing

Cement Processing Overview. Power Transmission Products & Solutions for Cement Processing Cement Processing Overview Power Transmission Products & Solutions for Cement Processing Choose Rexnord to help you produce tomorrow s cement today. From specification and installation to field monitoring

More information

IBC Tote Containment Sumps

IBC Tote Containment Sumps IBC Tote Containment Sumps DENIOS Provides More Models- and More Variety of IBC Totes Sumps than any other Manufacturer Painted, Galvanized, Stainless Steel, and Poly models available Models provide storage

More information

DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR'S OFFICE GENERAL INDUSTRY SAFETY STANDARDS

DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR'S OFFICE GENERAL INDUSTRY SAFETY STANDARDS MIOSHA-STD-1114 (10/15) 10 Pages For further information Ph: 517-284-7740 www.michigan.gov/mioshastandards DEPARTMENT OF LICENSING AND REGULATORY AFFAIRS DIRECTOR'S OFFICE GENERAL INDUSTRY SAFETY STANDARDS

More information

BAGGAGE HANDLING SYSTEMS. Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 -

BAGGAGE HANDLING SYSTEMS. Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 - BAGGAGE HANDLING SYSTEMS Trastecnica S.p.A. Handling Baggage Systems Edition 2002 - Rev. 00-1 - TECHNICAL SPECIFICS INDEX Check-in with one conveyor 4 Scales 6 Belt Conveyors 8 Take away 9 Feeder and Belt

More information

UFO 1 FOLDER INDEX A2 FOLDING MACHINE TYPE 10060 LIST NO DESCRIPTION PAGE 10101M Main Assembly - Mechanical 2 10201M Main Roller Assembly 4 16101M Upper & Lower Perforator Shaft Assembly 6 12701M Primary

More information

ATS Overhead Table Shelf System INSTRUCTION MANUAL

ATS Overhead Table Shelf System INSTRUCTION MANUAL ATS Overhead Table Shelf System INSTRUCTION MANUAL ATS Overhead Table Shelf System Instruction Manual Warranty Newport Corporation warrants this product to be free of defects in material and workmanship

More information

AESCO/MADSEN. Self-Erect Silos by AESCO/MADSEN

AESCO/MADSEN. Self-Erect Silos by AESCO/MADSEN AESCO/MADSEN Self-Erect Silos by AESCO/MADSEN AESCO/MADSEN manufactures two self-erecting silos called the WM-Series. The WM-50 has a 50-ton silo and the WM-80 has an 80-ton. The WM Series comes complete

More information

Product catalogue, pipe and sewer cleaning systems

Product catalogue, pipe and sewer cleaning systems Product catalogue, pipe and sewer cleaning systems Nozzles Rotorjet trolley Hose reels Cleaning devices www.hammelmann.com Contents (Navigation via Bookmarks) Rotorjet trolley Rotary joints, spray pipes

More information

PaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842

PaLLe t trucks Lifting carts t r g in t if L 2435 6815 6836 6856 6842 l i f t i n g c a r t s Lifting carts The prograe for lifting, transporting and storage From the classical forklift trolley to the machine lifter, from furniture dollies to a chassis with 24 tons load

More information

CONVEYING TECHNOLOGY LOADING TECHNOLOGY PALLETIZING TECHNOLOGY PACKAGING TECHNOLOGY SORTATION AND DISTRIBUTION SYSTEMS.

CONVEYING TECHNOLOGY LOADING TECHNOLOGY PALLETIZING TECHNOLOGY PACKAGING TECHNOLOGY SORTATION AND DISTRIBUTION SYSTEMS. CONVEYING TECHNOLOGY LOADING TECHNOLOGY PALLETIZING TECHNOLOGY PACKAGING TECHNOLOGY SORTATION AND DISTRIBUTION SYSTEMS BEUMER paketpac BEUMER paketpac flat film method Palletless packaging according to

More information

Equipment Information

Equipment Information 3002A Equipment Information INDEX: DESCRIPTION AND KEY FEATURES LAYOUT NOMINAL TECHNICAL DATA CONFIGURATION Sealed Air GmbH Customer Systems Center D4 Park 4 CH-6039 Root-Längenbold Telephone: +41 (0)

More information

Pallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification

Pallet Jack. OWNER S MANUAL Model MH1230. Important Safety Instructions Assembly Instructions Parts and Hardware Identification OWNER S MANUAL Model MH1230 Important Safety Instructions Assembly Instructions Parts and Hardware Identification Pallet Jack CAUTION: Read, understand and follow ALL instructions before using this product

More information

ASPHALT PLANT, NOMINAL PRODUCTION OF 160 T/H, IN

ASPHALT PLANT, NOMINAL PRODUCTION OF 160 T/H, IN ASPHALT PLANT, NOMINAL PRODUCTION OF 160 T/H, IN Equipments are designed to reach the nominal production based in the following standard : - 3% aggregate moisture ; - sea level operation ; - aggregate

More information

Design and Analysis of Screw Conveyor at Inlet of Ash/Dust Conditioner

Design and Analysis of Screw Conveyor at Inlet of Ash/Dust Conditioner Design and Analysis of Screw Conveyor at Inlet of Ash/Dust Conditioner Mayur M. Wable 1, Vijay K. Kurkute 2 1 M.Tech Scholar, 2 Assistant Professor, BVUCOE, Pune, India Abstract The Screw conveyors are

More information

COMMERCIAL GAS DRYER

COMMERCIAL GAS DRYER COMMERCIAL GAS DRYER MODELS CGM2941TQ0 CGM2941TQ1 07 08 Litho in U.S.A. (LT)(mek) c 2008 WHIRLPOOL CORPORATION Part No. Rev. B BULKHEAD PARTS (White) (White) 2 BULKHEAD PARTS 1 Literature Parts 8563800

More information

Conveying Systems. Efficient and reliable.

Conveying Systems. Efficient and reliable. Conveying Systems. Efficient and reliable. High-performance technology. Innovative solutions. Grain terminal Grain collection point Reliable high-performance conveying systems are a key contributor to

More information

Belt and Roller Conveyor for boxes and containers

Belt and Roller Conveyor for boxes and containers logiss srl 38068 Rovereto (TN) Italy Viale del Lavoro, 16/E (ZI) Tel. +39 0464 401121 Fax. +39 0464 423077 Mail technical@logiss.eu Web Belt and Roller Conveyor for boxes and containers A wide range of

More information

Construction Management

Construction Management Construction Management Engineering / Manufacturing / Project Management / Field Services Planning, coordination and control of dry bulk plant construction projects from concept to completion. Team consists

More information

6 inch A-Arm Lift Kit WARNING: 16-018/16-019. installation instructions. will fit CLUB CAR DS. included:

6 inch A-Arm Lift Kit WARNING: 16-018/16-019. installation instructions. will fit CLUB CAR DS. included: Revised May 205 6-08/6-09 6 inch A-Arm Lift Kit will fit CLUB CAR DS installation instructions included: Rear Lift Blocks Main Suspension Assembly Spindles A-Arms Rear Shock Mounting Plates U-Bolts WARNING:

More information

The Back Saver. Ergonomic Lifting Guide For Roll Handling

The Back Saver. Ergonomic Lifting Guide For Roll Handling The Back Saver Ergonomic Lifting Guide For Roll Handling Since 1990, Alum-a-lift has conceived, designed, developed and manufactured ergonomic lifting devices; Devices to lift, lower, move, position and

More information

Vision Engravers and Routers PRE-Installation Guide. 2015 Vision Engraving & Routing Systems

Vision Engravers and Routers PRE-Installation Guide. 2015 Vision Engraving & Routing Systems Vision Engravers and Routers PRE-Installation Guide Revised: 8/19/2015 Vision Engravers and Routers PRE-Installation Guide All rights reserved. No parts of this work may be reproduced in any form or by

More information

Keep materials moving

Keep materials moving Keep materials moving Cartons, totes, pallets, components and finished goods can travel for miles on conveyor through manufacturing facilities, warehouses and distribution centers. Here s a look at the

More information

Products & Solutions L3856

Products & Solutions L3856 Safety First Products & Solutions L3856 Problem visit martin-eng.com call 800-544-2947 email info@martin-eng.com Hazards Of Conveyors Conveyors are one of the best productivityenhancing tools available,

More information

mk Conveyor Technology

mk Conveyor Technology mk Conveyor Technology One construction kit many options Base Technology Profile Technology Conveyor Technology Factory Equipment Linear Motion Advantages of the mk modular system Everything comes from

More information

COMMERCIAL GAS DRYER

COMMERCIAL GAS DRYER COMMERCIAL GAS DRYER MODELS CGD8990XW0 4 12 Litho In U.S.A. (CMS) (psw) c 2012 WHIRLPOOL CORPORATION Part No. Rev. B TOP AND CONSOLE PARTS 2 TOP AND CONSOLE PARTS 1 Literature Parts W10184516 Installation

More information

BASIC INFORMATION RECORD

BASIC INFORMATION RECORD BASIC INFORMATION RECORD Legal name: Address: O.N.T. OFFICINE NASTRI TRASPORTATORI SpA Via Provinciale, 25-24040 LALLIO Bergamo - ITALY Telephone: +39 35 691085 / +39 35 201010 Telefax: +39 35 692382 Internet:

More information

Owner s Manual Gantry Cranes

Owner s Manual Gantry Cranes Owner s Manual Gantry Cranes Fixed Height Gantry Crane MODEL NUMBER: SERIAL NUMBER: CAPACITY IN TONS: Telescoping Gantry Crane Bushman AvonTec 262-790-4200, 800338-7810, Fax 262-790-4200 www.bushmanavontec.com

More information

Belt Conveyor System

Belt Conveyor System Belt Driven Conveyors the cost effective solution for transporting unit loads. Systems Handling Services range of powered belt conveyors is designed for applications where improved load control and speed

More information

1300 MAXTRAK SPECIFICATION

1300 MAXTRAK SPECIFICATION CONE CRUSHER Crusher type: Liners: Standard concave: Lubrication: Adjustment: Control: Concave options: 1300 Automax Crusher. Manganese steel alloy mantle and concave. Medium Coarse. Pumped system having

More information

COMMERCIAL GAS DRYER

COMMERCIAL GAS DRYER COMMERCIAL GAS DRYER MODELS CGM2751TQ0 (WHITE) CGM2751TQ1 (WHITE) 5 12 Litho in U.S.A. (CMS) (psw) c 2012 WHIRLPOOL CORPORATION Part No. W10119631 Rev. C TOP AND CONSOLE PARTS W10119631 2 TOP AND CONSOLE

More information

Product Data Sheets. Belt Conveyor System

Product Data Sheets. Belt Conveyor System Product Data Sheets Belt Conveyor System Belt Conveyor System Belt Driven Conveyors the cost effective solution for transporting unit loads. Texam Limited s range of powered belt conveyors is designed

More information

USED BUT NOT SHOWN: ITEMS 11-24.

USED BUT NOT SHOWN: ITEMS 11-24. FO000900 - TABBING SYSTEM, MCS TABBER 2" Item Part Number Description Quantity 1 SM022604 Base Sub Assembly, MCS Tabber (2") 1 2 AF000512 Tabbing Head, MCS 2" 1 3 VC014001 Cable, Molded, DB25M-DB25F, 3

More information

LINEAR ACTUATORS. Linear Actuators. Linear Actuators. Linear Actuators are Actuators that creates motion in a straight line, as contrasted

LINEAR ACTUATORS. Linear Actuators. Linear Actuators. Linear Actuators are Actuators that creates motion in a straight line, as contrasted LINEAR ACTUATORS Linear Actuators Linear Actuators Linear Actuators are Actuators that creates motion in a straight line, as contrasted with circular motion of a conventional electric motor. Linear actuators

More information

1. Lay out 2 pieces of 7/8" tubing and mark for bending as shown. Remember that the bend is in the shaded area as shown below in Figure 1.

1. Lay out 2 pieces of 7/8 tubing and mark for bending as shown. Remember that the bend is in the shaded area as shown below in Figure 1. MINI BIKE PLANS Page 1 INTRODUCTION Before starting to build your Mini-Bike, be sure that you have all the parts shown on the material list. You will note that tubing has been used in the construction.

More information

PLM series Permanent load lifting magnets

PLM series Permanent load lifting magnets Lifting gear Load lifting magnets/chain hoists PLM series Permanent load lifting magnets Load-bearing capacity of up to 1 t depending on model despite light weight High standard of safety with simple lever

More information

ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013

ANSI APPROVED 04/11/2014 ANSI APPROVED 08/17/2011. 45 Reaffirmation ANSI APPROVED 02/28/2014. 45 Reaffirmation ANSI APPROVED 05/06/2013 STANDARDS STATUS REPORT As of November 4, 2015 Note: Dates in RED indicate the last action taken; Highlighted Items Indicate New/Open Items; Grey items have been closed Document TC Status Comments ASME

More information

ZIG-ZAG 2035 Continuous Overhead Power Chain Conveyor

ZIG-ZAG 2035 Continuous Overhead Power Chain Conveyor ZIG-ZAG 2035 Continuous Overhead Power Chain Conveyor 2 6 MINIMUM 3 6 MAXIMUM 5 4-3/4 1 6-1/2 1 0 TRAVEL TANGENT 2-0 STANDARD RADIUS 26-1/2 4 0 HARDWARE PACKAGE 53 A 19-3/4 42 A 9 1 2-11/16 6-3/16 17 ZIG-ZAG

More information

ROUGHNECK II Pumpless Drain

ROUGHNECK II Pumpless Drain SERVICE BULLETIN SB4027 Rev. I 1/11 For Used Oil Only ROUGHNECK II Pumpless Drain Model #4110-022 FOR USED OIL ONLY (Black) For Antifreeze Only Model #4110-023 FOR USED ANTIFREEZE ONLY (Green) Patent #

More information

DR ALL-TERRAIN FIELD and BRUSH MOWER

DR ALL-TERRAIN FIELD and BRUSH MOWER DR ALL-TERRAIN FIELD and BRUSH MOWER Parts List and Assembly Diagrams Important: Please read the Safety and Operating Instructions and the separate Engine Manufacturer s Owners Manual to become familiar

More information

CONVEYING TECHNOLOGY LOADING TECHNOLOGY PALLETIZING TECHNOLOGY PACKAGING TECHNOLOGY SORTATION AND DISTRIBUTION SYSTEMS

CONVEYING TECHNOLOGY LOADING TECHNOLOGY PALLETIZING TECHNOLOGY PACKAGING TECHNOLOGY SORTATION AND DISTRIBUTION SYSTEMS CONVEYING TECHNOLOGY LOADING TECHNOLOGY PALLETIZING TECHNOLOGY PACKAGING TECHNOLOGY SORTATION AND DISTRIBUTION SYSTEMS High capacity chain bucket elevators BEUMER CONVEYING TECHNOLOGY Bucket elevators

More information

2200 SERIES COMMON DRIVE PACKAGE Special Capabilities Specification Sheet

2200 SERIES COMMON DRIVE PACKAGE Special Capabilities Specification Sheet 975 Cottonwood Ave., PO Box 20, Hartland, Wisconsin 53029-0020, USA www.dorner.com info@dorner.com COMMON DRIVE CONVEYOR SETUP Up to (4) conveyors can be coupled together and driven from a single gearmotor.

More information

EXCAVATOR SAFETY TRAINING

EXCAVATOR SAFETY TRAINING EXCAVATOR SAFETY TRAINING INSPECTION CHECKLIST INSPECTION AREA INSPECTION RESULTS Sat. Unsat. N/A Comments Carrier & Car Body Rotation system Tracks Rollers Frame, welds, bolts Drive system Upper Structure

More information

Interactive Computer Based Courses

Interactive Computer Based Courses These SKF Self-Learning Tools (SLT) are a onestop interactive solution for students at various levels including the students of mechanical and other engineering streams. They eliminate the need to take

More information

MODEL G300 BRAKE BLEEDER

MODEL G300 BRAKE BLEEDER MODEL G300 BRAKE BLEEDER Installation, Operation & Repair Parts Information Branick Industries, Inc. 4245 Main Avenue P.O. Box 1937 Fargo, North Dakota 58103 REV060616 P/N: 81-0035G 1 THIS PAGE INTENTIONALLY

More information

all VAC LIFT ALL-VAC-LIFT Phone + 1.832.615.9110 4621 Redstart Street www.vac-lift.com Fax + 1.832.201.9101

all VAC LIFT ALL-VAC-LIFT Phone + 1.832.615.9110 4621 Redstart Street www.vac-lift.com Fax + 1.832.201.9101 ergonomic FORKLIFT vacuum ATTACHMENTs FOR ALL MATERIALS HANDLING FOR LIFTING METAL, WOOD, PLASTIC, STONE, CONCRETE, PAPER, AND MORE In Warehousing, Order Picking, Palletizing, Loading, Conveying, Production.

More information

Directive 2006/42/EC Classification of equipment used for lifting loads with lifting machinery

Directive 2006/42/EC Classification of equipment used for lifting loads with lifting machinery 1(7) Classification of equipment used for lifting loads with lifting machinery December 2009 This classification was approved by the Machinery ing Group as a basis for a consistent application of the term

More information

Valu Guide Sheaths. Valu Guide Inserts. Optional Valu Guide Inserts. Typical Properties of Valu Guide Rail. and Hardware.

Valu Guide Sheaths. Valu Guide Inserts. Optional Valu Guide Inserts. Typical Properties of Valu Guide Rail. and Hardware. 14 gauge stainless steel The Original, Long Life Sanitary Guide Rail Valu Guide rail incorporates two outstanding materials: stainless steel and UHMW. The 14 ga. stainless steel sheath provides rigid streamlined

More information

BEUMER solutions for the

BEUMER solutions for the BEUMER solutions for the building materials industry Efficient. Safe. conveying & loading BEUMER solutions for the building materials industry 2 3 Family values, sustainable products, true pioneering spirit

More information

Loewe GK Installation and operating manual

Loewe GK Installation and operating manual SCHMIDT-KUPPLUNG GmbH Loewe GK Installation and operating manual Loewe GK Loewe GK: angular and radial displacement compensation combined with axial stiffness. The compact coupling combines angular and

More information

FLOORTEC R 680 B. Part List US-English. Model: FLOORTEC R 680 B

FLOORTEC R 680 B. Part List US-English. Model: FLOORTEC R 680 B Model: Part List US-English Table of Contents General view 3 Rotomolded assembly 5 Chassis assembly 7 Drive assembly 9 Steering assembly 11 Control pedals assembly 13 Waste container assembly 15 Filter

More information

TANK FABRICATION. Automated Solutions for Your Tank Fabrication Project. Bug-o Systems www.bugo.com

TANK FABRICATION. Automated Solutions for Your Tank Fabrication Project. Bug-o Systems www.bugo.com TANK FABRICATION Automated Solutions for Your Tank Fabrication Project. Bug-o Systems www.bugo.com BUG-O ALL TIME GIRTH WELDER Bug-o Systems offers the Automatic Girth Welder for tank fabrication applications.

More information

WARNING! Failure to follow these inspection procedures can cause personal injury and property damage.

WARNING! Failure to follow these inspection procedures can cause personal injury and property damage. GARDNER-DENVER TECHNICAL MANUAL CPTEN-136 07/03 Hoist Inspection and Maintenance Guide Inspection Record For: Hoist Model.: Hoist Serial.: WARNING! Failure to follow these inspection procedures can cause

More information

HANDLING SYSTEMS SOLUTION

HANDLING SYSTEMS SOLUTION AUTOMATED HANDLING CONTINUOUS HANDLING OF UNIT LOADS LA SOLUTION TRANSITIQUE HANDLING SYSTEMS SOLUTION PALLETS RANGE S pal /// RANGE FOR TRANSPORT OF PALLETS UP TO 1500 KG /// 3 STANDARD WIDTHS ADAPTED

More information

1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45

1/29/2008 DR50. Baja Motorsports Inc. P.O. Box 61150 Phoenix, AZ 85082 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 DR50 Toll Free: 888-863-2252 PART NUMBERS PRICES ARE SUBJECT TO CHANGE 1 of 45 CYLINDER & CYLINDER HEAD Part UPC Number Description Baja Description 1 DR50-001 842645074424 CYLINDER 1 1 2 DR50-002 842645074431

More information

Pipe Cutting and Beveling Clamshells

Pipe Cutting and Beveling Clamshells Pipe Cutting and Beveling Clamshells Who We Are One Company, Total Support, Complete Solutions For more than a century, Hydratight has provided world-class bolted joint solutions and continues to set international

More information

DRUM ROLLER. FAR-1, Article No. B69-6300-A DRUM CART FOR 200 LITER STEEL DRUMS. Model FK 1029-1 FK 1029-3 FK 1029-2 FK 1029-4

DRUM ROLLER. FAR-1, Article No. B69-6300-A DRUM CART FOR 200 LITER STEEL DRUMS. Model FK 1029-1 FK 1029-3 FK 1029-2 FK 1029-4 DRUM ROLLER Suitable for drums up to 200 liter capacity Made from fire-galvanized sheet steel ø 610 mm, with 4 polyamide swiveling castors ø 75 mm Model FAR-1: closed version with welded leak-proof base,

More information

Operating Instructions Hand pallet trucks HU Profi. Issue 08.2000

Operating Instructions Hand pallet trucks HU Profi. Issue 08.2000 Operating Instructions Hand pallet trucks HU Profi Issue 08.2000 Index 1 Introduction 1.1 Product description 1.2 General information on service and maintenance 1.3 Spare parts 1.4 Dimensions 2 Correct

More information

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com

DUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave

More information

Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8)

Number Wheeler P/N Description Set Rex P/N Notes 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 1 603500 Base 1 J001 2 603501 Support, Right 1 J002 3 603502 Support, Left 1 J003 4 600328 Nut (M8) 4 5 600130 Spring Washer (8mm) 4 6 600344 Roll Pin (M6x30) 4 7 600129 Socket Hd Cap Screw (M8x25) 4 8

More information

MODEL T10023 ACCESSORY KIT #1 FOR T10010/T10097 WET GRINDER

MODEL T10023 ACCESSORY KIT #1 FOR T10010/T10097 WET GRINDER MODEL T0023 ACCESSORY KIT # FOR T000/T0097 WET GRINDER INSTRUCTION SHEET Introduction The Model T0023 Accessory Kit # for the Model T000/T0097 Wet Grinder includes fixtures for sharpening small knives,

More information

Product and Process Solutions for Material Recovery Facilities and Recycling Centers

Product and Process Solutions for Material Recovery Facilities and Recycling Centers Product and Process Solutions for Material Recovery Facilities and Recycling Centers Quality Products, Proven Experience Whether you process 15 tons of recyclables per day, or 150, NEXGEN has the equipment

More information

CR25 Cable Roller Guide

CR25 Cable Roller Guide INSTRUCTION MANUAL CR25 Cable Roller Guide Read and understand all of the instructions and safety information in this manual before operating or servicing this tool. 52022071 2005 Greenlee Textron Inc.

More information

Rexroth. Spare parts list. Bosch Group. Part No.: R909401762 Designation: VERSTELLPUMPE A4V-125 HD

Rexroth. Spare parts list. Bosch Group. Part No.: R909401762 Designation: VERSTELLPUMPE A4V-125 HD : R909401762 : VERSTELLPUMPE A4V-125 HD *G* 1 R909400454 ROTARY GROUP L 2 R909414470 HYDRAULIC CONTROL L 3 R909080279 PORT PLATE WITH VALVES L 4 R909400395 INTERNAL GEAR PUMP L 6 R909401736 CONTROL MODULE

More information

Automated Material Handling and Storage Systems

Automated Material Handling and Storage Systems Automated Material Handling and Storage Systems How do we define automated material handling and storage systems? How do they work? What is automated guided vehicle systems? Automated Material Handling

More information

Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation

Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Instruction Manual 1052 Size 20 Actuator (F & G) Fisher 1052 Size 20 Diaphragm Rotary Actuator with F and G Mounting Adaptation Contents Introduction... 1 Scope of manual... 1 Description... 1 Specifications...

More information

DESIGN AND SIZING OF SCREW FEEDERS. By Marco Bortolamasi Johannes Fottner

DESIGN AND SIZING OF SCREW FEEDERS. By Marco Bortolamasi Johannes Fottner DESIGN AND SIZING OF SCREW FEEDERS By Marco Bortolamasi Johannes Fottner International Congress for Particle Technology Abstract Screw devices and other systems. This paper is concerned with the design

More information

Selecting and Sizing Ball Screw Drives

Selecting and Sizing Ball Screw Drives Selecting and Sizing Ball Screw Drives Jeff G. Johnson, Product Engineer Thomson Industries, Inc. Wood Dale, IL 540-633-3549 www.thomsonlinear.com Thomson@thomsonlinear.com Fig 1: Ball screw drive is a

More information

CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY

CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY CHAPTER 7 PARTS LISTS, SCHEMATIC DIAGRAMS AND WARRANTY Parts List - Handlebar Assembly NOTE: Part numbers listed are available through MacKissic, Inc. Please add 916- prefix to the part number when ordering.

More information

LarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves

LarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves LarsLap model C for cutting, milling grinding and lapping seats and flanges on globe, safety and control valves As a rule, control and reduction valves of the globe type have an integrated plug that narrowly

More information

Free Examples of plant layout drawing

Free Examples of plant layout drawing Free layout examples; a wide variety of industrial layouts, within different facility types. Principles of plant layout and design will apply widely. Free Examples of plant layout drawing Principles of

More information

SECTION 23 34 13. A. Horsepower: Do not increase or decrease fan motor horsepower without written approval from Engineer.

SECTION 23 34 13. A. Horsepower: Do not increase or decrease fan motor horsepower without written approval from Engineer. PART 1 GENERAL SECTION 23 34 13 HVAC FANS 1.01 SUMMARY A. Section Includes: 1. Exhaust fans. 2. Transfer fans. B. Related Documents: 1. Drawings and general provisions of the Contract, including General

More information

Field Application Note

Field Application Note Field Application Note Reverse Dial Indicator Alignment RDIA Mis-alignment can be the most usual cause for unacceptable operation and high vibration levels. New facilities or new equipment installations

More information

VARIABLE CHAMBER BALER VEGA 170 HQ HD HD CUT SYSTEM

VARIABLE CHAMBER BALER VEGA 170 HQ HD HD CUT SYSTEM VARIABLE CHAMBER BALER THE RANGE Pick-up Two newly-designed pick-ups, both with large diameter helical conveyors placed in the external section of the rotor. This technical solution ensures uniform and

More information

Highly flexible couplings

Highly flexible couplings Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations

More information

5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no.

5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3. (Lowbed length approx. 14,000 mm) Technical Specification no. 5 axle Lowbed Semitrailer with Automatic Steering Model ST 70-93 L3 (Lowbed length approx. 14,000 mm) Technical Specification no. ST 70-93 L3 06/02 5 axle Lowbed Semitrailer with automatic steering Model

More information

SECTION 15140 - PIPE HANGERS AND SUPPORTS

SECTION 15140 - PIPE HANGERS AND SUPPORTS Part I - GENERAL 1.01 SECTION INCLUDES A. The work covered under this section consists of the furnishing of all necessary labor, supervision, materials, equipment, and services to completely execute the

More information

1-800-295-5510 uline.com SPECIFICATIONS

1-800-295-5510 uline.com SPECIFICATIONS H-1394, H-1395, H-1396 H-1397, H-3859, H-3860 π GRAVITY CONVEYOR 1-800-295-5510 uline.com SPECIFICATIONS Conveyor Bed Width In (mm) 18, 24, 30 (457, 610, 762) Load Capacity Per Linear Foot (305mm) Lbs

More information

COIL PAC. Subec AB, Sprängarvägen 16, 132 38 Saltsjö-Boo, Sweden, Tel.: +46 8 884633, Fax: +46 8 977658, e-mail: info@subec.se

COIL PAC. Subec AB, Sprängarvägen 16, 132 38 Saltsjö-Boo, Sweden, Tel.: +46 8 884633, Fax: +46 8 977658, e-mail: info@subec.se COIL PAC Subec AB, Sprängarvägen 16, 132 38 Saltsjö-Boo, Sweden, Tel.: +46 8 884633, Fax: +46 8 977658, e-mail: info@subec.se Description of the machine Coil Pac 240 und Coil Pac 400 are two types of

More information

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S

C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S C O N V E Y O R C O M P O N E N T S C H A I N S B E L T S B E A R I N G S January 2009 Issue 6 Valu Guide Brackets The Ultimate in Adjustability and Cost Savings Valu Guide brackets are part of a family

More information

Deluxe Welding Tool Chest

Deluxe Welding Tool Chest Item# 164782 OPERATOR S MANUAL Read carefully and understand RULES FOR SAFE OPERATION and instructions before operating. Failure to follow the safety rules and other basic safety precautions may result

More information

GEARS AND GEAR SYSTEMS

GEARS AND GEAR SYSTEMS This file aims to introducing basic concepts of gears and pulleys. Areas covered include spur gears, compound gears, chain drive, rack/pinion systems and pulley systems. GEARS AND GEAR SYSTEMS Gears can

More information

Cooking at the Speed of light!

Cooking at the Speed of light! Cooking at the Infrared Cooking & Colouring Infrabaker is a modular infrared continuous cooking system developed by Infrabaker International. The machine is designed to cook and/or put colour on a wide

More information

Using Design Accelerators in Autodesk Inventor

Using Design Accelerators in Autodesk Inventor Using Design Accelerators in Autodesk Inventor Ravi Akella Autodesk, Inc. Ales Ricar Autodesk, Inc. MA 201-3P Getting things in gear are easy with the Design Accelerators in Autodesk Inventor. Find out

More information

CENTRIFUGAL PUMP OVERVIEW Presented by Matt Prosoli Of Pumps Plus Inc.

CENTRIFUGAL PUMP OVERVIEW Presented by Matt Prosoli Of Pumps Plus Inc. CENTRIFUGAL PUMP OVERVIEW Presented by Matt Prosoli Of Pumps Plus Inc. 1 Centrifugal Pump- Definition Centrifugal Pump can be defined as a mechanical device used to transfer liquid of various types. As

More information

Heavy Duty Equipment Mechanic (Class Code 3743) Task List. Inspection and Diagnosis

Heavy Duty Equipment Mechanic (Class Code 3743) Task List. Inspection and Diagnosis Heavy Duty Equipment Mechanic (Class Code 3743) Task List Inspection and Diagnosis In order to verify complaints and determine malfunctions a Heavy Duty Mechanic: 1. Reads operators written trouble reports,

More information

FOR SALE: RECYCLING PLANT FOR. - Aluminum scrap - Light metals - WEEE - Mixed industrial waste BANO PREMAC 28-90 HYDRO. Single shaft shredder

FOR SALE: RECYCLING PLANT FOR. - Aluminum scrap - Light metals - WEEE - Mixed industrial waste BANO PREMAC 28-90 HYDRO. Single shaft shredder FOR SALE: RECYCLING PLANT FOR - Aluminum scrap - Light metals - WEEE - Mixed industrial waste BANO PREMAC 28-90 HYDRO Single shaft shredder Stationary, weight 40 ton Table of content Sale of BANO PREMAC

More information

Mini-ZT. Parts Manual. Models 915054-1540 915064-1534 915070-1534. 00462700 4/06 Printed in USA

Mini-ZT. Parts Manual. Models 915054-1540 915064-1534 915070-1534. 00462700 4/06 Printed in USA Mini-ZT Parts Manual Models 0-0 0-00 - 0000 /0 Printed in USA THE MANUAL Before you operate your unit, carefully and completely read manuals supplied with the unit. The contents will provide you with an

More information

MAXX-Mini Lift Portable Lift Table. MAXX-JACK Electric High Lift MAXX-JACK Pallet Truck. MAXX-Mobile Tilt & Lift

MAXX-Mini Lift Portable Lift Table. MAXX-JACK Electric High Lift MAXX-JACK Pallet Truck. MAXX-Mobile Tilt & Lift MAXX-Mini Lift Portable Lift Table MAXX-JACK Electric High Lift MAXX-JACK Pallet Truck MAXX-Mobile Tilt & Lift MAXX-MINI-Lift Tote & Platform Lift Electric MAXX-MOBILE SKID LIFTER Manual & Electric Lift

More information

REMOVAL AND INSTALLATION

REMOVAL AND INSTALLATION 303-01C-1 REMOVAL AND INSTALLATION Engine Body On Special Tool(s) Adapter For 303-D043 303-D043-02 or equivalent Special Tool(s) 303-01C-1 Turbocharger Lifting Bracket 303-1266 Wrench, Fan Clutch Nut 303-214

More information

&'( ,,( - 0&( .&( WMSD = Work Related Muscular Skeletal Disorder

&'( ,,( - 0&( .&( WMSD = Work Related Muscular Skeletal Disorder Lotsa pounds ! "!!!" #$% &'( )*+ 0&( )*+,,( - )*+.&( /) )*+ WMSD = Work Related Muscular Skeletal Disorder Source: SHARP technical report No. 40-6-2002 #$%+#! Source: American Society of Safety Engineers

More information

6720616592.00-1.SD. Flat roof. Rack Mounting. Installation instructions 6 720 647 036 (2010/11) AU

6720616592.00-1.SD. Flat roof. Rack Mounting. Installation instructions 6 720 647 036 (2010/11) AU 6720616592.00-1.SD Flat roof Rack Mounting AU Installation instructions 2 Contents AU Contents 1 Key to symbols and safety instructions....... 3 1.1 Explanation of symbols................ 3 1.2 Safety

More information

2,500 3,700 lb. Spring Axles

2,500 3,700 lb. Spring Axles Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle Open Utility Trailers Landscape Equipment Sport Utility motorcycle, quad and tri wheel

More information

POWERS Controls No. 4 Pneumatic Damper Actuator

POWERS Controls No. 4 Pneumatic Damper Actuator POWERS Controls No. 4 Pneumatic Damper Actuator Technical Instructions Document No. 155-032P25 AP 331-2 Actuator Assembly 331-2929 Typical Actuator Assembly 331-2904 Typical Actuator Assembly 331-3000

More information

6,100 7,000 lb. Spring Axles

6,100 7,000 lb. Spring Axles Typical Industries & Applications include: Recreational Vehicle Trailers Enclosed Trailers Cargo Vehicle Race Vehicle Open Utility Trailers Landscape Equipment Dump Trailers Construction Agricultural Equipment

More information

Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability

Rollers. from the UK s largest roller manufacturer. Quality Performance Reliability Rollers from the UK s largest roller manufacturer Quality Performance Reliability 42 Index Gravity Rollers Light to Medium Duty 4 Heavy Duty 5 Plastic Rollers 6 Stainless Steel Rollers 7 Grooved Rollers

More information

CoolWave r 2 Phase Control Board and Cable Replacement Kits

CoolWave r 2 Phase Control Board and Cable Replacement Kits Instruction Sheet P/N 1102452A CoolWave r 2 Phase Control Board and Cable Replacement Kits Two kits are available to replace the CoolWave 2 phase control board: S S Phase Control Board and Cable Kit (required

More information

2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure

2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure 2100 AD 015 0009 Mirror Elevator Ball Nut Replacement Procedure Derek Guenther 1/28/2015 Rev. Purpose The purpose of this document is to describe the procedure necessary to replace one of the ball nuts

More information

PBX Series Quick Fit Connector Bimetallic Steam Traps

PBX Series Quick Fit Connector Bimetallic Steam Traps 6262100/6 IM-P626-01 ST Issue 6 PBX Series Quick Fit Connector Bimetallic Steam Traps Installation and Maintenance Instructions 1. Safety information 2. General product information 3. Installation 4. Commissioning

More information

Roller Chain Coupling

Roller Chain Coupling Roller Chain Coupling Features 1. Simple structure A roller chain coupling consists of one duplex roller chain and two sprockets for a simplex chain. Handling is very simple as both the shafts (driving

More information