CURRICULUM VITA OF DR. RAMAZAN KAHRAMAN

Size: px
Start display at page:

Download "CURRICULUM VITA OF DR. RAMAZAN KAHRAMAN"

Transcription

1 CURRICULUM VITA OF DR. RAMAZAN KAHRAMAN Head of the College of Engineering Requirements Unit Professor, Chemical Engineering Department Qatar University, P.O. Box 2713, Doha, Qatar. Tel: / 4125 Mobile: Fax: Research Areas Materials Science and Engineering (Composite Materials, Polymer Technology, Corrosion, Mechanical Properties) and Transport Phenomena. Degrees Ph.D., Chemical Engineering, Montana State University, Bozeman, Montana, USA, March Supporting Courses in Mechanical Engineering. GPA: 4.0/4.0 M.Sc., Chemical Engineering, Montana State University, Bozeman, Montana, USA, March GPA: 3.88/4.0 B.Sc., Chemical Engineering, Middle East Technical University, Ankara, Turkey, July Graduated with High Honors standing and ranked first in class. Theses M.Sc. Thesis (1988): Auger Electron Spectroscopic Study of the Oxidation of Oxygen- Saturated Polycrystalline Zirconium Ph.D. Thesis (1993): Influence of Fiber-Matrix Interphase on High Temperature Behavior of Glass-Ceramic Matrix Composites Employment History 2/2008-present Head, College of Engineering Requirements Unit, Qatar University, Qatar. 9/2007-present Professor, Chemical Engineering, Qatar University, Qatar. 6/2006-8/2007 Professor, Chemical Engineering, King Fahd University of Petroleum & Minerals (KFUPM), Saudi Arabia. 11/1999-5/2006 Associate Professor, Chemical Engineering, KFUPM, Saudi Arabia. 9/ /1999 Assistant Professor, Chemical Engineering, KFUPM, Saudi Arabia. 9/1986-2/1993 Research Assistant, Chemical Engineering, Montana State University, USA. 6/1984-8/1984 Summer Practical Trainee, Kutahya Fertilizer Plant, Turkey. Courses Taught Taught 11 undergraduate and 3 graduate courses at different levels and areas of specialization including Introduction to Chemical Engineering, Thermodynamics, Fluid Mechanics, Heat Transfer, Mass Transfer, Corrosion, Polymer Technology, Materials Evaluation and Selection, Introduction to Gas Engineering and Integrated Design Course. 1

2 Selected List of Funded Research Projects Al-Nassar, Y. N., Kahraman, R. and Zughbi, H. D., Numerical and Experimental Investigations of Phase Change in Two- and Three- Dimensional Bounded Objects, KFUPM Grant, Project No: ME/NUMERICAL/184, USD 139,000/-, 22/2/ /2/2000. Abu-Sharkh, B., Kahraman, R., Hamid, H. and Ali, S. A., Preparation, Characterization and Testing of Polypropylene-Palm Fiber Composites, KACST (King Abdulaziz City for Science & Technology) Grant, Project No: ARP 18-14, USD 225,000/-, 1/3/2000-4/3/2003. Kahraman, R., Saricimen, H., Al-Zahrani, M. M. and Al-Dulaijan, S. U., Inhibition of Reinforcing Steel Corrosion under Atmospheric Condition, KACST Grant, Project No: ARP 19-10, USD 120,000/-, 1/8/1421 (28/10/2000)-1/10/1424 (25/11/2003). Sleem-ur-Rahman, Kahraman, R. and Abul-Hamayel, M. A., Corrosion Protection of Steel by Catalyzed Polypyrrole Films, KFUPM Grant, Project No: CHE/C- PROTECTION/227, USD 105,000/-, 1/9/ /8/2004. Kahraman, R. and Sunar, M., Effects of Moisture Sorption and the Filler Content on the Mechanical Performance of Metal Joints Bonded by Aluminum Filled Epoxy, SABIC Research Grant, Project No: SAB-2003/12, USD 15,750/-, 1/4/2003-1/10/2004. Kahraman, R. and Abu-Sharkh, B., Water Adsorption Behavior of Palm/Polypropylene Composites, SABIC Grant, Project No: SAB-2004/22, USD 16,000/-, 1/6/ /11/2005. Kahraman, R., Sunar, M. and Abdul Aleem, B. J., A Study on Environmental Degradation of Aluminum Joints Bonded by Rubber-Modified and Aluminum-Filled Epoxy Adhesive, SABIC Research Grant, Project No: SAB-2006/15, USD 20,400/-, 1/9/ /2/2008. Kahraman, R. and Alfantazi, A., "Effect of Heat Treatment Type on Corrosion Resistance of Mild Steel in a Salt Solution", Senior Student Project Grant, Funded by Qatar University, QAR 22,000/-, AlMa'adeed, M., Hodzic, A. and Kahraman, R., "Utilization of Recycled Polymers in Qatar", QSTP RN Grant, USD 1,945,580.-, 1/6/ /12/2012. Selected Refereed Journal Publications Kahraman, R., Mandell, J. F. and Deibert, M. C., High Temperature Mechanical Behavior of Multidirectional Nicalon/CAS-II Composite, Journal of Materials Science, 30, (1995). Kahraman, R. and Mandell, J. F., Influence of Fiber-Matrix Bond Strength on the Performance of Nicalon/CAS-II Composite, Journal of Composite Materials, 30(8), (1996). Kahraman, R., Mandell, J. F. and Deibert, M. C., High Temperature Transverse Fracture Toughness of Nicalon Fiber Reinforced CAS-II Glass-Ceramic Matrix Composite, Journal of the American Ceramic Society, 80(7), (1997). Khan, K., Kahraman, R., Hamad, E., Ali, S. and Hamid, S., Studies on a Terephthalic Acid and Dihydroxydiphenyl Sulfone Liquid Crystalline Copolymer and Its Composites with Different Thermoplastics, Journal of Applied Polymer Science, 64, (1997). Yilbas, B. S., Coban, A., Kahraman, R. and Khaled, M. M., Hydrogen Embrittlement of Ti-6Al-4V Alloy with Surface Modification by TiN Coating, International Journal of Hydrogen Energy, 23(6), (1998). 2

3 Kahraman, R., Khan, K. A., Ali, S. A., Hamid, S. H. and Sahin, A. Z., A Study of the Effect of Polystyrene Sulfonation on the Performance of Terephthaloyl Chloride- Dihydroxydiphenyl Sulfone Copolymer/Polystyrene System, Journal of Materials Engineering and Performance, 7, (1998). Yilbas, B. S., Khaled, M. M., Kahraman, R., Qutub, A., Khan, Z. and Ourfelli, M., The Corrosion Behavior of TiN Coated and Uncoated Incoley 800 Alloy, Journal of Materials Engineering and Performance, 7(6), (1998). Demirel, Y. and Kahraman, R., Entropy Generation in a Rectangular Packed Bed with Wall Region Effect, International J. of Heat and Mass Transfer, 42(13), (1999). Demirel, Y. and Kahraman, R., Thermodynamic Analysis of Convective Heat Transfer in an Annular Packed Bed, International Journal of Heat and Fluid Flow, 21, (2000). Kahraman, R., Inhibition of Atmospheric Corrosion of Reinforcing Steel by Sodium Benzoate Treatment, ASM Journal of Materials Engineering and Performance, 11, (2002). Kahraman, R., Al-Mathami, A. A., Saricimen, H., Abbas, N. and Rahman, S. U., A Study of Corrosion Control of Carbon Steel Using Inhibitors in a Simulated Environment, Anti-Corrosion Methods and Materials, 49:5, (2002). Al-Mathami, A., Saricimen, H., Kahraman, R., Al-Zahrani, M. and Al-Dulaijan, S. Inhibition of Atmospheric Corrosion of Mild Steel by Sodium Dihydrogen Orthophosphate Treatment, Anti-Corrosion Methods and Materials, 51:1, (2004). Abu-Sharkh, B. F., Kahraman, R., Abbasi, S. H. and Hussein, I. A., The Effect of Epolene E-43 as a Compatibilizer on the Mechanical Properties of Palm Fiber- Polypropylene Composites, Journal of Applied Polymer Science, 92, (2004). Al-Harthi, M., Kahraman, R., Yilbas, B., Sunar. M. and Abdul Aleem B. J., Influence of Water Immersion on the Single-Lap Shear Strength of Aluminum Joints Bonded with Aluminum Powder Filled Epoxy Adhesive, Journal of Adhesion Science and Technology, 18:15-16, (2004). Kahraman, R., Abbasi, S. and Abu-Sharkh, B., Influence of Epolene G-3003 as a Coupling Agent on the Mechanical Behavior of Palm Fiber-Polypropylene Composites, International Journal of Polymeric Materials, 54, (2005). Kahraman, R. and Al-Harthi, M., Moisture Diffusion into Aluminum Powder Filled Epoxy Adhesive in NaCl Solutions, International Journal of Adhesion & Adhesives, 25, (2005). Kahraman, R., A Study on Durability of Metal Joints Bonded with Aluminum Powder Filled Epoxy Adhesive, Materials Science and Technology, 21:2, (2005). Kahraman, R. and Abu-Sharkh, B., Moisture Absorption Behavior of Palm/Polypropylene Composites in Distilled Water and Sea Water, International Journal of Polymeric Materials, 56, (2007). Kahraman, R., Louhlin, K. and Al-Harthi, M., Concentration Dependence of Moisture Diffusivity in Aluminum Particle Filled Epoxy Adhesive in Salt Solutions, The Journal of Adhesion, 83, (2007). Malaibari, Z., Kahraman, R., Saricimen, H., and Quddus, A. Investigation of Atmospheric Corrosion of Mild Steel after Treatment by Several Inhibitor Solutions, Corrosion Engineering, Science and Technology, 42:2, (2007). Al-Harthi, M., Loughlin, K. and Kahraman*, R., Moisture Diffusion into Epoxy Adhesive: Testing and Modeling, Adsorption, 13, (2007). 3

4 Kahraman, R. and Abu-Sharkh, B., Moisture Diffusion into Palm/Polypropylene Composites in Sodium Chloride Solutions, Journal of Applied Polymer Science, 106:4, (2007). Kahraman, R., Sunar, M. and Yilbas, B., Influence of Adhesive Thickness and Filler Content on the Mechanical Performance of Aluminum Single-Lap Joints Bonded with Aluminum Powder Filled Epoxy Adhesive, Journal of Materials Processing Technology, 205, (2008). Arshad, M., Kahraman, R., Sahin, A. and Ben-Mansour, R., "Second Law Analysis of Compressible Flow through a Diffuser Subjected to Constant Wall Temperature", International Journal of Exergy, 7:1, (2010). And additional 23 journal publications, 30 fully refereed conference publications in proceedings and 10 abstract refereed conference presentations. Student Supervision 10 MS. Thesis Supervision, 12 MS. Thesis Committee Memberships, 80 Co-op Projects, 4 Design Projects, 2 Graduation Research Project, Evaluation of 30 Summer Training Reports. Conference Organization Involved with organization of various conferences: International Petroleum Technology Conference, Doha, Qatar, December 7-9, 2009, Second International Conference on Engineering Education & Training, Kuwait, April 9-11, 2007, Twelfth International Conference on Composites/Nano Engineering, Spain, August 1-6, 2005 and 6 more. Membership in Editorial Boards Associate editor of The Journal of Engineering Research (TJER), 9/2005-present. Technical editor of the theme issue Polymers and Plastics of the Arabian Journal for Science and Engineering, Volume 27, Number 1C (2002). University, Departmental and Public Service Head of the College Requirements Unit (CRU) since February CRU is responsible for managing the college requirement courses. The specific tasks of the unit include: Coordination between different departments and interfacing with the College of Arts and Science (CAS), Timetable and scheduling for the College of Engineering requirement courses, Overall assessment and dissemination, Periodical review and revision of the syllabi of the college requirement courses, Making recommendations for recruitments and lab developments (when needed), Students advising and orientations, ABET criteria implementation. Chairman of the committees Committee for ABET (Accreditation Board for Engineering and Technology) Evaluation, Curriculum Committee, Planning Committee, Scheduling Committee, Materials Research Group, Program Assessment Team and various other ad hoc committees. Member of the committees Recruitment Committee, Quality Assurance Committee, Graduate Committee, Continuing Education Committee, Laboratory & Safety Committee, Promotion Committee, Thermal Research Group, Committee on the Development of Multidisciplinary Undergraduate Program on Materials Science and Engineering, Program Assessment Team for the Academic Program of the Mechanical 4

5 Engineering Department, University Housing Committee, Special Functions Committee, various ad hoc committees and member of soccer, basketball and volleyball teams. 10 short courses in the areas of Process Fluid Flow, Polymer Science and Engineering, Rheology and Polymer Processing and Fundamentals of Corrosion, 8 technical seminars within Qatar and outside, organization of 3 conferences and chair of sessions in 5 conferences. Honors and Awards College of Engineering Sciences Distinguished Service Award, KFUPM, 2004 and Excellence in Teaching Award, KFUPM, Silver medal from KACST (King Abdulaziz City for Science and Technology) for the project Inhibition of Reinforcing Steel Corrosion under Atmospheric Condition, College of Engineering Sciences Funded Projects Award, KFUPM, Distinguished Researcher Award, KFUPM, President of Chemical Engineering Graduate Students, MSU, 9/1988-2/1993. Ranked first in class, Middle East Technical University, 9/1982-7/1986. and various certificates of recognition/appreciation. 5

Towards Achieving ABET s Substantial Equivalency Recognition in Department of Chemical Engineering at a non-us institution

Towards Achieving ABET s Substantial Equivalency Recognition in Department of Chemical Engineering at a non-us institution Towards Achieving ABET s Substantial Equivalency Recognition in Department of Chemical Engineering at a non-us institution Majeed S. Jassim (speaker) Department of Chemical Engineering University of Bahrain

More information

Chemical Engineering - CHEN

Chemical Engineering - CHEN Auburn University 1 Chemical Engineering - CHEN Courses CHEN 2100 PRINCIPLES OF CHEMICAL ENGINEERING (4) LEC. 3. LAB. 3. Pr. (CHEM 1110 or CHEM 1117 or CHEM 1030) and (MATH 1610 or MATH 1613 or MATH 1617

More information

Curriculum Vitae ACADEMIC QUALIFICATIONS

Curriculum Vitae ACADEMIC QUALIFICATIONS Curriculum Vitae Name: Ghaithan Ahmad Al-Muntasheri E-mail: g.a.al-muntasheri@tudelft.nl Delft University of Technology Tel: 0031-15-278-81365 (office) Stevinweg 1 0031-62-01-53864 (mobile) 2628 CN Delft

More information

CURRICULUM VITAE. Donghyun Shin EDUCATION: RESEARCH INTERESTS: PROFESSIONAL EXPERIENCE:

CURRICULUM VITAE. Donghyun Shin EDUCATION: RESEARCH INTERESTS: PROFESSIONAL EXPERIENCE: CURRICULUM VITAE EDUCATION: Donghyun Shin Department of Mechanical and Aerospace Engineering The University of Texas at Arlington, Arlington, TX 76019 Tel: (817) 272-9336; Email: shin@uta.edu; Fax: (817)

More information

A Career in Knowledge Transfer & Project Management

A Career in Knowledge Transfer & Project Management A Career in Knowledge Transfer & Project Management Dr Matthew Thornton Project Manager, NetComposites 27 November 2013 Outline of this presentation: 1995 2001: The undergraduate years! 2001 2005: The

More information

SALT SPRAY AND IMMERSION CORROSION TESTING OF PM STAINLESS STEEL MATERIALS. W. Brian James Hoeganaes Corporation. Cinnaminson, NJ 08077

SALT SPRAY AND IMMERSION CORROSION TESTING OF PM STAINLESS STEEL MATERIALS. W. Brian James Hoeganaes Corporation. Cinnaminson, NJ 08077 SALT SPRAY AND IMMERSION CORROSION TESTING OF PM STAINLESS STEEL MATERIALS W. Brian James Hoeganaes Corporation Cinnaminson, NJ 08077 Leander F. Pease III Powder-Tech Associates Inc. Andover, MA 01845

More information

College of Engineering Mechanical Engineering Depart. rtment. Saudi Arabia Ministry of Higher Education Qassim University Deanship of Graduate Studies

College of Engineering Mechanical Engineering Depart. rtment. Saudi Arabia Ministry of Higher Education Qassim University Deanship of Graduate Studies Saudi Arabia Ministry of Higher Education Qassim University Deanship of Graduate Studies College of Engineering Mechanical Engineering Depart rtment Master of Science in Mechanical Engineering Mechanical

More information

ADVANCED COMPUTATIONAL TOOLS FOR EDUCATION IN CHEMICAL AND BIOMEDICAL ENGINEERING ANALYSIS

ADVANCED COMPUTATIONAL TOOLS FOR EDUCATION IN CHEMICAL AND BIOMEDICAL ENGINEERING ANALYSIS ADVANCED COMPUTATIONAL TOOLS FOR EDUCATION IN CHEMICAL AND BIOMEDICAL ENGINEERING ANALYSIS Proposal for the FSU Student Technology Fee Proposal Program Submitted by Department of Chemical and Biomedical

More information

Introduction to materials science and engineering. structures and properties of materials. Materials Engineering

Introduction to materials science and engineering. structures and properties of materials. Materials Engineering .Materials Science o The discipline of investigating the relationships that exist between the structures and properties of materials. Materials Engineering o The discipline of designing or engineering

More information

1.1 PERSONAL Name: Muhammad S. Vohra E-mail: vohra@kfupm.edu.sa

1.1 PERSONAL Name: Muhammad S. Vohra E-mail: vohra@kfupm.edu.sa 1. SUMMARY OF EXPERIENCE RECORD 1.1 PERSONAL Name: Muhammad S. Vohra E-mail: vohra@kfupm.edu.sa 1.2 EDUCATION Ph.D. Civil Engineering, University of Maryland, USA (1998) Option: Environmental Engineering.

More information

Characterization of Polymers Using TGA

Characterization of Polymers Using TGA application note Characterization of Polymers Using TGA W.J. Sichina, Marketing Manager Introduction Thermogravimetric analysis (TGA) is one of the members of the family of thermal analysis techniques

More information

STRUCTURAL VACUUM INSULATION PANELS

STRUCTURAL VACUUM INSULATION PANELS STRUCTURAL VACUUM INSULATION PANELS Musgrave D., President Thermal Visions, Inc., 83 Stonehenge Dr., Granville, Ohio 43023, U.S.A. Phone: 1-740-973-3671, Fax 1-740-587-4025 dwight.musgrave@thermalvisions.com

More information

Peter M. Stork, Ph.D.

Peter M. Stork, Ph.D. Curriculum Vitae Peter M. Stork, Ph.D. 4837 Steeler Blvd., Pittsburgh, PA 15213 Home: (412) 555-4567 Office: (412) 555-2982 E-mail: pstork@pitt.edu OBJECTIVE Seeking high-profile teaching and research

More information

Introduction to Metallography

Introduction to Metallography Introduction to Metallography Metallography has been described as both a science and an art. Traditionally, metallography has been the study of the microscopic structure of metals and alloys using optical

More information

Adhesion of Coatings

Adhesion of Coatings Adhesion of Coatings J. Baghdachi, Ph.D. Coatings Research Institute Eastern Michigan University (734) 487-3192 Freshpaint@aol.com jamil.baghdachi@emich.edu Outline: What is adhesion Factors affecting

More information

Tool Design and Concurrent Engineering using Rapid Tooling Construction Methods

Tool Design and Concurrent Engineering using Rapid Tooling Construction Methods Section Number 3563 Tool Design and Concurrent Engineering using Rapid Tooling Construction Methods Nicole Hoekstra Engineering Technology Department Western Washington University Abstract Prior to rapid

More information

COMPOSITE MATERIALS. Asst. Prof. Dr. Ayşe KALEMTAŞ

COMPOSITE MATERIALS. Asst. Prof. Dr. Ayşe KALEMTAŞ COMPOSITE MATERIALS Office Hours: Tuesday, 16:30-17:30 akalemtas@mu.edu.tr, akalemtas@gmail.com Phone: +90 252 211 19 17 Metallurgical and Materials Engineering Department ISSUES TO ADDRESS Classification

More information

Assessment of Mercury Storage Containers

Assessment of Mercury Storage Containers Assessment of Mercury Storage Containers S. J. Pawel Corrosion Science and Technology Group Oak Ridge National Laboratory October 2009 Outline of Assessment 1. Review Compatibility of Mild Steel and Stainless

More information

Curriculum Vitae Gerard J. F. Ring, Ph.D.

Curriculum Vitae Gerard J. F. Ring, Ph.D. Curriculum Vitae Gerard J. F. Ring, Ph.D. HIGHLIGHTS Holds a B.S. degree in Chemistry/Biology from the State University of New York at Albany, and M.S. and Ph.D. degrees from the Institute of Paper Chemistry.

More information

Dr. Ali Abadi Chapter 5: Chemical Effect Materials Properties. What is corrosion?

Dr. Ali Abadi Chapter 5: Chemical Effect Materials Properties. What is corrosion? Dr. Ali Abadi Chapter 5: Chemical Effect Materials Properties (Corrosion) Introduction 1 By the end of this tutorial, you should have an understanding of: relative susceptibility of different metals to

More information

2012 AIAA SDM Wind Energy Session

2012 AIAA SDM Wind Energy Session 2012 AIAA SDM Wind Energy Session Performance of Composite Materials Subjected to Salt Water Environments David Miller 1, John F. Mandell 2, Daniel D. Samborsky 2, Bernadette A. Hernandez-Sanchez 3 and

More information

DEVELOPMENTS IN SPRAY APPLIED COATINGS FOR THE PROTECTION OF PROCESS VESSELS

DEVELOPMENTS IN SPRAY APPLIED COATINGS FOR THE PROTECTION OF PROCESS VESSELS DEVELOPMENTS IN SPRAY APPLIED COATINGS FOR THE PROTECTION OF PROCESS VESSELS Presented By : Mr. Ron Campbell Senior Vice President Belzona Asia Pacific NACE Jubail Meeting October 2009 Protective Coatings

More information

SCHOOL OF ENGINEERING & APPLIED SCIENCE MIAMI UNIVERSITY 2008-2009

SCHOOL OF ENGINEERING & APPLIED SCIENCE MIAMI UNIVERSITY 2008-2009 PAPER SCIENCE & ENGINEERING BACCALAUREATE PROGRAM This program leads to the degree, Bachelor of Science in Paper Science & Engineering (Accredited by the Engineering Accreditation Commission of ABET) SCHOOL

More information

White Paper. Stop bearing corrosion before it starts Richard Burgess, Les Miller and David VanLangevelde, Kaydon Bearings

White Paper. Stop bearing corrosion before it starts Richard Burgess, Les Miller and David VanLangevelde, Kaydon Bearings Stop bearing corrosion before it starts Richard Burgess, Les Miller and David VanLangevelde, Kaydon Bearings Corrosion is the natural enemy of a rolling element bearing, and a sneaky enemy at that. When

More information

Materials and Structures. Indian Institute of Technology Kanpur

Materials and Structures. Indian Institute of Technology Kanpur Introduction to Composite Materials and Structures Nachiketa Tiwari Indian Institute of Technology Kanpur Lecture 13 Other Manufacturing Methods for Composites Composite Fabrication Using Preformed Molding

More information

Specifying the Correct Enclosure Material

Specifying the Correct Enclosure Material Specifying the Correct Enclosure Material Step : Identify environmental chemicals: Will the enclosure be placed in a washdown environment? Will the enclosure be located indoors or outdoors? Indoors Outdoors

More information

Development of an innovative bio-based structural adhesive

Development of an innovative bio-based structural adhesive Development of an innovative bio-based structural adhesive Blanca Palomo, R&D Engineer blanca.palomo@rescoll.fr RESCOLL Independent research company located in Pessac (33) specialized in technologic innovation

More information

Composite Materials. Mary P. Shafer. Fabric Development, Inc. Quakertown, PA 18951

Composite Materials. Mary P. Shafer. Fabric Development, Inc. Quakertown, PA 18951 Composite Materials Mary P. Shafer Fabric Development, Inc. Quakertown, PA 18951 Composite Material Two inherently different materials that when combined together produce a material with properties that

More information

Curriculum Vitae. Personal Details. Permanent Address. Name: Hussein Abdel-Hafez Abdel-Rahman Mohamed

Curriculum Vitae. Personal Details. Permanent Address. Name: Hussein Abdel-Hafez Abdel-Rahman Mohamed Curriculum Vitae Personal Details Name: Hussein Abdel-Hafez Abdel-Rahman Mohamed Qualification: Ph.D. Degree Date of Birth: 23/6/1970 Place of Birth: Sohag, Egypt Nationality: Egyptian Marital Status:

More information

ME349 Engineering Design Projects

ME349 Engineering Design Projects ME349 Engineering Design Projects Introduction to Materials Selection The Material Selection Problem Design of an engineering component involves three interrelated problems: (i) selecting a material, (ii)

More information

The mode I interlaminar fracture toughness of carbon fiber/epoxy resin composite with freezing after water absorption

The mode I interlaminar fracture toughness of carbon fiber/epoxy resin composite with freezing after water absorption High Performance and Optimum Design of Structures and Materials 327 The mode I interlaminar fracture toughness of carbon fiber/epoxy resin composite with freezing after water absorption H. Katogi & K.

More information

Mohammed F. Alzahrani, CFA

Mohammed F. Alzahrani, CFA CURRICULUM VITAE Mohammed F. Alzahrani, CFA Department of Finance & Economics College of Industrial Management King Fahd University of Petroleum & Mineral Dhahran 31261, Saudi Arabia Building #24 Room

More information

Plastics and Polymer Business. Properties enhancement for Plastics

Plastics and Polymer Business. Properties enhancement for Plastics News Letter Vol. 18, issue October-December, 2012 Hyperdispersants and Coupling Agents for Thermoplastics and Thermosets Solplus, Ircolplus and Solsperse hyperdispersants and coupling agents have been

More information

Solidification, Crystallization & Glass Transition

Solidification, Crystallization & Glass Transition Solidification, Crystallization & Glass Transition Cooling the Melt solidification Crystallization versus Formation of Glass Parameters related to the formaton of glass Effect of cooling rate Glass transition

More information

Combination well done

Combination well done Combination well done Zinc rich primers with micaceous iron oxide. Libuse Hochmannová. Micaceous iron oxide (MIO) is widespread in protective coatings due to its outstanding anticorrosive properties. A

More information

Thermal Analysis Option

Thermal Analysis Option Thermal Analysis Option The TGA-Sorption System is available in two versions. Each consists of a thermoanalyzer, a humidity generator, and an interface. In the simpler version, the humidified gas produced

More information

PRODUCT DATA SHEET SP-4888 DAMP SURFACE COATING

PRODUCT DATA SHEET SP-4888 DAMP SURFACE COATING DESCRIPTION: ADVANTAGES: USES: APPLICATION: SP-4888 Damp Surface Coating is a two-component epoxy coating developed specifically for application on wet or damp steel surfaces. In addition, it may be applied

More information

Tableting Punch Performance Can Be Improved With Precision Coatings

Tableting Punch Performance Can Be Improved With Precision Coatings Tableting Punch Performance Can Be Improved With Precision Coatings by Arnold H. Deutchman, Ph. D. Director of Research and Development (614) 873-4529 X 114 adeutchman@beamalloy.net Mr. Dale C. Natoli

More information

Pipeline Engineering Capabilities and Initiatives at the University of Calgary

Pipeline Engineering Capabilities and Initiatives at the University of Calgary Pipeline Engineering Capabilities and Initiatives at the University of Calgary Dr. Frank Cheng Professor Canada Research Chair in Pipeline Engineering Mechanical and Manufacturing Engineering Schulich

More information

New Developments in Adhesive Resins for Oriented Barrier // PP Film Applications. Development Center Materials Lab.

New Developments in Adhesive Resins for Oriented Barrier // PP Film Applications. Development Center Materials Lab. New Developments in Adhesive Resins for Oriented Barrier // PP Film Applications Development Center Materials Lab. HIROTAKA UOSAKI Contents 1. Characteristics of Adhesive Resins 2. New Developments in

More information

Article 510 CORROSION PROTECTION Adopted by the CGA Board of Directors on October 14, 2006

Article 510 CORROSION PROTECTION Adopted by the CGA Board of Directors on October 14, 2006 California Groundwater Association An NGWA Affiliate State PO Box 14369 * Santa Rosa * CA 95402 707-578-4408; FAX: 707-546-4906; email: wellguy@groundh2o.org Article 510 CORROSION PROTECTION Adopted by

More information

Assoc. Prof. Dr. M. Aylin DELİORMANLI

Assoc. Prof. Dr. M. Aylin DELİORMANLI Assoc. Prof. Dr. M. Aylin DELİORMANLI EDUCATION Degree University Department / Program Undergrad Ege University Chemical Engineering 99 99 M.S. Izmir Institute of Tech. Materials Science and Engineering

More information

CORROSION AND CORROSION PROTECTION. A short introduction course by Roy Johnsen, Professor NTNU

CORROSION AND CORROSION PROTECTION. A short introduction course by Roy Johnsen, Professor NTNU 1 CORROSION AND CORROSION PROTECTION A short introduction course by Roy Johnsen, Professor NTNU 2 WHO IS ROY? Siv.ing. NTH 1979 Dr.ing. NTH 1984 Scientist SINTEF 1981-1985 Research Manager Statoil 1985-1991

More information

Composite Design Fundamentals. David Richardson

Composite Design Fundamentals. David Richardson Composite Design Fundamentals David Richardson Contents A review of the fundamental characteristics of composites Stiffness and Strength Anisotropic Role of fibre, matrix and interface Composite failure

More information

CURRICULUM VITAE. Vassilia L. Ninni Associate Professor Department of Business Administration Athens University of Economics and Business

CURRICULUM VITAE. Vassilia L. Ninni Associate Professor Department of Business Administration Athens University of Economics and Business CURRICULUM VITAE Vassilia L. Ninni Associate Professor Department of Business Administration Athens University of Economics and Business Athens 2010 CURRICULUM VITAE 1. Personal Information Name: Vassilia

More information

Chemical Engineering Graduate Student Handbook Texas A&M University at Qatar

Chemical Engineering Graduate Student Handbook Texas A&M University at Qatar Chemical Engineering Graduate Student Handbook Texas A&M University at Qatar Revised & Approved CHEN Faculty Dec 5 2012 Chemical Engineering Program Texas A&M Engineering Building, Education City PO Box

More information

SOLVING SECONDARY CONTAINMENT PROBLEMS

SOLVING SECONDARY CONTAINMENT PROBLEMS SOLVING SECONDARY CONTAINMENT PROBLEMS CEILCOTE CORROSION CONTROL PRODUCTS Leadership in Corrosion Problem Solving CEILCOTE As the pioneer and technological leader in polymer linings, coatings and flooring

More information

EVALUATION OF THE PERFORMANCE OF THE PROTECTIVE SURFACE COATINGS FOR CONCRETE

EVALUATION OF THE PERFORMANCE OF THE PROTECTIVE SURFACE COATINGS FOR CONCRETE EVALUATION OF THE PERFORMANCE OF THE PROTECTIVE SFE COATINGS FOR CONCRETE Haimoon CHEONG * Hwangu YU *2 Taesong AHN *3 Byunghwan OH *4 ABSTRT: Chloride penetration into concrete is the main cause of the

More information

CURRICULUM VITAE. September, 2015

CURRICULUM VITAE. September, 2015 CURRICULUM VITAE September, 2015 C1. Personal Information Asaad AbdulRahman Nayyef Alani Department of Computer Science,, Sultan Qaboos University, P.O. Box 36, Al-Khoudh 123, Muscat, Sultanate of Oman,

More information

Unit 2: Matter Properties and Changes

Unit 2: Matter Properties and Changes Unit 2: Matter Properties and Changes CHEMISTRY August 29, 2007 1 Brainteaser Define physical and chemical change (in your own words). Is this picture of a physical or a chemical change? Explain your reasoning

More information

Mechanical Engineering PhD / MASc / MEng

Mechanical Engineering PhD / MASc / MEng Mechanical Engineering PhD / MASc / MEng School of Graduate Studies w w w.r yerson.ca/graduate Mechanical Engineering PhD / MASc / MEng School of Graduate Studies w w w.r yerson.ca/graduate ii Ryerson

More information

GRADUATE COUNCIL CURRICULUM REPORT #5A, February 2014. Change in pre-requisites to Graduate standing in HDF or permission of instructor.

GRADUATE COUNCIL CURRICULUM REPORT #5A, February 2014. Change in pre-requisites to Graduate standing in HDF or permission of instructor. GRADUATE COUNCIL CURRICULUM REPORT #5A, February 2014 I. 500/600-level courses Changes: 1) College of Human Sciences and Services Human Development and Family Studies HDF 536 Family Dynamics and Health

More information

PEKK Thermoplastic Polymer

PEKK Thermoplastic Polymer T E C H N I C A L D A T A S H E E T PEKK THERMOPLASTIC POLYMER PEKK Thermoplastic Polymer DESCRIPTION Cytec Engineered Materials PEKK composites consist of a matrix of poly(etherketoneketone) polymer with

More information

CORROSION PROTECTION METHODS OF STRUCTURAL STEEL AGAINST ATMOSPHERIC CORROSION

CORROSION PROTECTION METHODS OF STRUCTURAL STEEL AGAINST ATMOSPHERIC CORROSION CORROSION PROTECTION METHODS OF STRUCTURAL STEEL AGAINST ATMOSPHERIC CORROSION E. Daflou a, E. Rakanta b, *G. Batis c a Chemical Engineer, Chemical Engineering School, Section of Materials Science and

More information

: Married, father of 31 years old son and 21 years old daughter

: Married, father of 31 years old son and 21 years old daughter CURRICULUM VITAE Name Date of Birth Place of Birth Nationality Marital Status : Abdurrazak Öncü : July 5th1955 : Kırıkkale, : Turkish : Married, father of 31 years old son and 21 years old daughter EDUCATION

More information

About KFUPM History & Location Campus Life Graduate Studies Ranking Research Activities Scholarship Opportunities for MS and PhD Students

About KFUPM History & Location Campus Life Graduate Studies Ranking Research Activities Scholarship Opportunities for MS and PhD Students Outline About KFUPM History & Location Campus Life Graduate Studies Ranking Research Activities Scholarship Opportunities for MS and PhD Students History and Location History Established in 1963 in a small

More information

DEPARTMENT OF DEFENSE ALLIED NATIONS TECHNICAL CORROSION CONFERENCE. November 15-19, 2015 Pittsburgh, PA, USA. Technical Program

DEPARTMENT OF DEFENSE ALLIED NATIONS TECHNICAL CORROSION CONFERENCE. November 15-19, 2015 Pittsburgh, PA, USA. Technical Program DEPARTMENT OF DEFENSE ALLIED NATIONS TECHNICAL CORROSION CONFERENCE November 15-19, 2015 Pittsburgh, PA, USA Technical Program Corrosion Policy Track: Topic: Corrosion Management T.S. NAVAIR Corrosion

More information

PolyCoil Heat Exchangers

PolyCoil Heat Exchangers PolyCoil Heat Exchangers WWW.POLYCOIL.EU 1 PolyCoil Heat Exchangers The PolyCoil heat exchanger is a revolutionary polymeric heat exchanger that was developed by CTI together with DuPont after years of

More information

The referenced Texas Essential Knowledge and Skills (TEKS) are from TEA Chemistry and TEA Integrated Physics and Chemistry.

The referenced Texas Essential Knowledge and Skills (TEKS) are from TEA Chemistry and TEA Integrated Physics and Chemistry. Texas University Interscholastic League Contest Event: Science (Chemistry) The contest challenges students to read widely in chemistry, to understand the significance of experiments rather than to recall

More information

EXAMPLE EXERCISE 4.1 Change of Physical State

EXAMPLE EXERCISE 4.1 Change of Physical State EXAMPLE EXERCISE 4.1 Change of Physical State State the term that applies to each of the following changes of physical state: (a) Snow changes from a solid to a liquid. (b) Gasoline changes from a liquid

More information

Distance Learning Program

Distance Learning Program Distance Learning Program Leading To Master of Engineering or Master of Science In Mechanical Engineering Typical Course Presentation Format Program Description Clarkson University currently offers a Distance

More information

Çankırı Karatekin University, Çankırı, Turkey. Lecturer of Refrigeration and Air Conditioning Engineering Technology Program of College

Çankırı Karatekin University, Çankırı, Turkey. Lecturer of Refrigeration and Air Conditioning Engineering Technology Program of College E UROPEAN CURRICULUM VITAE FORMAT PERSONAL INFORMATION Name ARSLAN Kamil (Asst. Prof. Dr.) Address Çankırı Karatekin University, Technical and Business College, 18200, Cankiri, TURKEY Telephone +90 376

More information

WHITE PAPER. LubrisenseTM. The Chemistry and Physics of Grease The Advantages of Grease

WHITE PAPER. LubrisenseTM. The Chemistry and Physics of Grease The Advantages of Grease WHITE PAPER 2004 01 LubrisenseTM The Chemistry and Physics of Grease The Advantages of Grease The Chemistry and Physics of Grease The Fundamental Grease Formulation The science of lubrication focuses on

More information

Chemical Engineering: undergraduate course contents

Chemical Engineering: undergraduate course contents Chemical Engineering: undergraduate course contents 2016-17 1 Chemical Engineering course contents This document gives information on the course structure and contents to potential undergraduate applicants

More information

RESEARCH INTERESTS. EDUCATION Sep. 2009 May 2014

RESEARCH INTERESTS. EDUCATION Sep. 2009 May 2014 Saleh Nasser Juma Al-Saadi, Ph.D. Current Address Department of Civil & Architectural Engineering, College of Engineering, Sultan Qaboos University, P.O. Box 33, Al-Khod 123, Muscat, Sultanate of Oman,

More information

Metal Migration on Electric Circuit Boards

Metal Migration on Electric Circuit Boards Three Bond Technical News Issued December 1, 1986 16 Metal Migration on Electric Circuit Boards 1. Introduction Today, many mechanical parts such as those used on electronic circuit boards are made to

More information

Technical Bulletin 1301. Talc in Plastics

Technical Bulletin 1301. Talc in Plastics Technical Bulletin 131 Talc in Plastics Contents Introduction Benefits of Talc in Polypropylene Compounds 1. Stiffness (E-Modulus) 2. Thermal Conductivity 3. Nucleation 4. Impact Strength 5. Deflection

More information

Corrosion Inhibitors in Antifreeze Coolants

Corrosion Inhibitors in Antifreeze Coolants 44th International Petroleum Conference, Bratislava, Slovak Republic, September 21-22, 2009 Corrosion Inhibitors in Antifreeze Coolants Bratislava 2009. 09. 22. Bálint Szilágyi Product development engineer

More information

THERMOPLASTIC COMPOSITE AIRCRAFT STRUCTURE REPAIR METHODOLOGY

THERMOPLASTIC COMPOSITE AIRCRAFT STRUCTURE REPAIR METHODOLOGY THERMOPLASTIC COMPOSITE AIRCRAFT STRUCTURE REPAIR METHODOLOGY On the stage of the repair project, repairing and operating the repaired object arises a number of issues in material science and technology

More information

INTRODUCTORY CHEMISTRY Concepts and Critical Thinking

INTRODUCTORY CHEMISTRY Concepts and Critical Thinking INTRODUCTORY CHEMISTRY Concepts and Critical Thinking Sixth Edition by Charles H. Corwin Chapter 13 Liquids and Solids by Christopher Hamaker 1 Chapter 13 Properties of Liquids Unlike gases, liquids do

More information

Lecture 4.1: Thermoplastics and Thermosets

Lecture 4.1: Thermoplastics and Thermosets Lecture 4.1: Thermoplastics and Thermosets The word plastic comes from the Greek word Plastikos, meaning able to be shaped and molded. Plastics can be broadly classified into two major groups on the basis

More information

POLYMER MODIFED DRY-MIX TILE ADHESIVES

POLYMER MODIFED DRY-MIX TILE ADHESIVES POLYMER MODIFED DRY-MIX TILE ADHESIVES Mr. Richard Zhang Wacker Polymer Material (Shanghai) Co., Ltd. Abstract: Modern ways to install ceramic tile is by so called thin-bed dry-mix tile adhesives. In order

More information

TRICON STEEL-CON. System Specifications

TRICON STEEL-CON. System Specifications TRICON STEEL-CON System Specifications Pipe Size Insulation Thickness Steel Conduit O.D. 1 1½ 6.63 2 1½ 8.63 3 2 10.75 4 2 10.75 6 2 14.00 8 2½ 16.00 10 2½ 18.00 12 2½ 20.00 Based on a minimum 3-6 burial

More information

Syllabus for F.4 Chemistry ( ) page 1 of 6 Sing Yin Secondary School Syllabus for Chemistry ( ) Form 4

Syllabus for F.4 Chemistry ( ) page 1 of 6 Sing Yin Secondary School Syllabus for Chemistry ( ) Form 4 Syllabus for F.4 Chemistry (2015-2016) page 1 of 6 Sing Yin Secondary School Syllabus for Chemistry (2015-2016) Form 4 AIMS AND OBJECTIVES According to the Curriculum Development Council, the broad aims

More information

Introduction to Aerospace Engineering

Introduction to Aerospace Engineering Introduction to Aerospace Engineering Lecture slides Challenge the future 1 Material types Metals, polymers, ceramics, composites Faculty of Aerospace Engineering 6-12-2011 Delft University of Technology

More information

EUROLAB 25 years. The role of metrology and testing to characterize materials and products. EUROLAB 25th Anniversary Seminar

EUROLAB 25 years. The role of metrology and testing to characterize materials and products. EUROLAB 25th Anniversary Seminar EUROLAB 25 years The role of metrology and testing to characterize materials and products April 9, 2015, Odense Danmark 1 Origin of Conformity Assessment The New Approach for the European Economic Community

More information

GATE Syllabus for Chemical Engineering

GATE Syllabus for Chemical Engineering 2017 YOUR CAREER QUEST ENDS HERE GATE Syllabus for Chemical Engineering Section 1: Engineering Mathematics Linear Algebra: 1. Matrix algebra, 2. Systems of linear equations, 3. Eigen values and eigenvectors.

More information

Preparation of a Carbon Fiber Reinforced Epoxy Composite and Increasing The Flight Performance For Radio Controlled Model Helicopters

Preparation of a Carbon Fiber Reinforced Epoxy Composite and Increasing The Flight Performance For Radio Controlled Model Helicopters Preparation of a Carbon Fiber Reinforced Epoxy Composite and Increasing The Flight Performance For Radio Controlled Model Helicopters B. Yesim BÜYÜKAKINCI 1 Tuğçe ÖZKENAR 2 Cem GÜLBAHAR 3 Abstract Composite-material

More information

Membrane operations for treatment of produced water

Membrane operations for treatment of produced water Membrane operations for treatment of produced water E. Drioli 1,2,3, 4, F. Macedonio 1, 2, Aamer Ali 2, Teresa Poerio 1, Essam El-Sayed 5, Mahmoud Abdel-Jawad 5 1 National Research Council - Institute

More information

Student Handbook Manufacturing Technology Program (MTP)-AS

Student Handbook Manufacturing Technology Program (MTP)-AS Royal Commission Yanbu Colleges and Institutes (RCYCI) Yanbu Industrial College (YIC) Department of Mechanical Engineering Technology (MET) Student Handbook Manufacturing Technology Program (MTP)-AS Student

More information

Galvannealed Coatings How do They Differ from Galvanized?

Galvannealed Coatings How do They Differ from Galvanized? GalvInfoNote 5 Galvannealed Coatings How do They Differ from Galvanized? Introduction The objective of this GalvInfoNote is to explain how a hot-dip galvannealed coating differs from a hot-dip galvanized

More information

Zirconium in Sulfuric Acid Pickling Applications

Zirconium in Sulfuric Acid Pickling Applications Zirconium in Sulfuric Acid Pickling Applications INTRODUCTION For more than 30 years, zirconium has been successfully used in hot sulfuric acid tanks for pickling steel. Zirconium is uniquely suited for

More information

THERMAL CONDUCTIVITY AND THERMAL EXPANSION COEFFICIENT OF GFRP COMPOSITE LAMINATES WITH FILLERS

THERMAL CONDUCTIVITY AND THERMAL EXPANSION COEFFICIENT OF GFRP COMPOSITE LAMINATES WITH FILLERS THERMAL CONDUCTIVITY AND THERMAL EXPANSION COEFFICIENT OF GFRP COMPOSITE LAMINATES WITH FILLERS K. Devendra $ and T. Rangaswamy & $ Asst. Professor, Dept. of Mech. Engineering, SKSVMACET, Laxmeshwar, KA,

More information

Additives for Aerosols Rust Preventives & Lubricants

Additives for Aerosols Rust Preventives & Lubricants Additives for Aerosols Rust Preventives & Lubricants Frank Kroto Global Technology Manager The Lubrizol Corporation 2006, all rights reserved Agenda Introductions Role of the additive supplier Rust Preventive

More information

About Hexapan Honeycomb

About Hexapan Honeycomb www.hexapan.com About Hexapan Honeycomb Our production is mainly HoneyComb Core and thermoplastic HoneyComb Sandwich panels. Our products with outstanding features such as lightness, high compressive

More information

SECTION 2 INTRODUCTION TO EXTREN

SECTION 2 INTRODUCTION TO EXTREN SECTION 2 INTRODUCTION TO EXTREN Look for this blue line in the left margin of the Design Manual documents. This line shows you where the latest update has been made. 2-1 (This page left blank intentionally)

More information

Innovations for LED. Geoff Gardner Global Marketing Manager LED Fabrication and Packaging Dow Corning Corporation

Innovations for LED. Geoff Gardner Global Marketing Manager LED Fabrication and Packaging Dow Corning Corporation 2012 Silicone Technology Innovations for LED Lighting i Challenges Geoff Gardner Global Marketing Manager LED Fabrication and Packaging g Dow Corning Corporation Silicone Technology Innovations for LED

More information

Electronic Materials able to detect, amplify and transmit electrical signals in a complex manner are light weight, compact and energy efficient

Electronic Materials able to detect, amplify and transmit electrical signals in a complex manner are light weight, compact and energy efficient CHAPTER 1 Knowledge and Comprehension Problems: 1.1 What are the main classes of engineering materials? Answer1.1: Metallic, polymeric, ceramic, composite, and electronic materials are the five main classes.

More information

Focus on superalloys as examples of high

Focus on superalloys as examples of high Hot Corrosion Focus on superalloys as examples of high temperature materials F. Petit, Hot Corrosion of Metals and Alloys, Oxidation of Metals 76 (2011) 1-21. Ref. Ch. 12 in Superalloys II Ch. 14 in Tien

More information

External Wrapping of Steel Riser Pipe. Case Study HJ3 CS200902

External Wrapping of Steel Riser Pipe. Case Study HJ3 CS200902 External Wrapping of Steel Riser Pipe Case Study HJ3 CS200902 Introduction Refineries process a wide variety of petroleum products. As part of the process, they rely on cooling towers, which recycle water

More information

DEEPSEALSM SERVICE SOLUTIONS

DEEPSEALSM SERVICE SOLUTIONS DEEP WATER CHEMICAL SOLUTIONS DEEPSEALSM SERVICE SOLUTIONS (DEEP SEA ENGINEERING ASSURANCE LEADERSHIP) Solving challenges. Deepwater Solutions from Multi-Chem ABOUT HALLIBURTON Founded in 1919, Halliburton

More information

UNIVERSITY OF MARIBOR FACULTY OF CHEMISTRY AND CHEMICAL ENGINEERING INFORMATION PACKAGE / INTERNATIONAL EXCHANGE STUDENTS' GUIDE 2016/2017.

UNIVERSITY OF MARIBOR FACULTY OF CHEMISTRY AND CHEMICAL ENGINEERING INFORMATION PACKAGE / INTERNATIONAL EXCHANGE STUDENTS' GUIDE 2016/2017. UNIVERSITY OF MARIBOR FACULTY OF CHEMISTRY AND CHEMICAL ENGINEERING INFORMATION PACKAGE / INTERNATIONAL EXCHANGE STUDENTS' GUIDE 2016/2017 Part II Information on study programmes A) General description

More information

HIGH PERFORMANCE THERMOPLASTIC COMPOSITE PROCESSING AND RECYCLING: FROM CRADLE TO CRADLE

HIGH PERFORMANCE THERMOPLASTIC COMPOSITE PROCESSING AND RECYCLING: FROM CRADLE TO CRADLE HIGH PERFORMANCE THERMOPLASTIC COMPOSITE PROCESSING AND RECYCLING: FROM CRADLE TO CRADLE MAXIME ROUX 1, NICOLAS EGUÉMANN, LIAN GIGER, CLEMENS DRANSFELD Fachhochschule Nordwestschweiz (FHNW), Institut für

More information

LAB SEVEN. Carbonate to Halide Conversion

LAB SEVEN. Carbonate to Halide Conversion Name Lab Partner(s) Section Date: Carbonate to Halide Conversion Objective The theoretical yield of the reaction product and the ratio of products to reactants will be predicted using the Law of Conservation

More information

Probably the greatest threat to softening resin is iron fouling. Cation resin will exchange ferrous iron Fe +2

Probably the greatest threat to softening resin is iron fouling. Cation resin will exchange ferrous iron Fe +2 Maintaining Ion Exchange Resin Based Systems by Michael C. Keller Sybron Chemicals Inc. Ion exchange resins use a process based upon ion selectivity. In this method, ions of greater preference will displace

More information

TEST LIST Relative Thermal Index (RTI) & Thermal Index (TI) for Materials

TEST LIST Relative Thermal Index (RTI) & Thermal Index (TI) for Materials TEST LIST Relative Thermal Index (RTI) & Thermal Index (TI) for Materials Relative Thermal Index & Thermal Index Tests ELTEK Labs conducts a wide range of thermal index tests to various industry standards.

More information

Fire-Damage or Freeze-Thaw of Strengthening Concrete Using Ultra High Performance Concrete

Fire-Damage or Freeze-Thaw of Strengthening Concrete Using Ultra High Performance Concrete Fire-Damage or Freeze-Thaw of Strengthening Concrete Using Ultra High Performance Concrete Ming-Gin Lee 1,a, Yi-Shuo Huang 1,b 1 Department of Construction Engineering, Chaoyang University of Technology,Taichung

More information

COMPATIBILITY OF PLASTIC WITH PHASE CHANGE MATERIALS (PCM)

COMPATIBILITY OF PLASTIC WITH PHASE CHANGE MATERIALS (PCM) COMPATIBILITY OF PLASTIC WITH PHASE CHANGE MATERIALS (PCM) C. Castellón 1, Ingrid Martorell 1, Inés Fernández 2, Albert Manich 3, L. F. Cabeza 1* 1 Centre GREA Innovació Concurrent Edifici CREA, Universitat

More information

Effect of Ni Content in a Low Alloy Steel on the High Temperature Oxide Scale Adherence

Effect of Ni Content in a Low Alloy Steel on the High Temperature Oxide Scale Adherence 52 China Steel Technical Report, Effect No. of Ni 21, Content pp. 52-58, in a Low (2008) Alloy Steel on the High Temperature Oxide Scale Adherence Effect of Ni Content in a Low Alloy Steel on the High

More information

Chemical Engineering Dual Degree Courses & Credits Distribution

Chemical Engineering Dual Degree Courses & Credits Distribution Chemical Engineering Dual Degree Courses & Credits Distribution Credits Distribution: UG Category Total Credits Basic Sciences 22 Engineering Arts and Science 18 Humanities and Social Sciences 1 Programme

More information