1 D-RATS Training D-RATS Lesson schedule 1. Introduction (need for dedicated address and a WINLINK address) 2. SFARES Toolkit a. Situation (EOC, SAR, DOH, Skywarn, Public Service) b. Systems (Internet, VHF/UHF repeaters, HF, Winlink 2000 System) c. Software 3. D-RATS Installation and Configuration 4. CHAT 5. FILES 6. MESSAGES 7. MAP including Map Downloader 8. RF Segment with D-STAR radios 9. Trouble shooting 10. Resources
2 3. D-RATS installation and configuration (1 hour) D-RATS software free (http://www.d-rats.com) in Windows, Linux or MacOS D-RATS Operating Guide: D-RATS Operating Guide pdf Operating Guide Update: D-RATS_Operating_Guide_Addendum_ pdf Quick Set Up.pdf for basic settings to get started using D-RATS Latest D-RATS release: Daily Build for Linux, MAC and Windows at: Configurations: o D-RATS configuration Part I Rev 1.doc o D-RATS configuration Part II Rev 1.doc Note: You don t need to be a ham to use D-RATS on the Internet. However, you do need to be a ham to use D-RATS if you use D-RATS and the Radio Frequency Segment (connect D-RATS to a radio).
3 4. CHAT Window [Tab] Main Area Where real time text is exchanged with all stations Received and transmitted text displayed in different colors and includes the port name and time stamp. (Colors can be adjusted in Preferences > Appearance) Text can be selected, copied and pasted into other applications. Likewise, text can be pasted into the [typing box] from other applications. Stations Pane (Area right side of the window) Displays call signs heard and the time since last heard in parentheses Hover mouse over a call sign to display their status and status message Blue means Online, Orange means Unattended Right click mouse on a call sign to display a context sensitive menu of additional operations. Ping: Check the status of a station Test Connectivity: Test quality of path to an RF station (important for RF Segment) Request Position: Get the location of a station to be displayed on the map. Get version: Request version of D-RATS Request mail check: Check if a station is holding mail for you Status Pane What other users see when they hover their mouse over your call sign Use the drop-down arrow to set your status as Online or Unattended
4 Type short message to be displayed with your status on the second line This is the text that appears in parentheses (as above) CHAT Window [Tab](continued) Port Selection Use the drop down arrow to select the port where text and QSTs are sent All enabled ports are monitored and can receive messages and file transfers, but text and QSTs only go out the selected port Quick Messages Allows storage of commonly used phrases when communicating via text Point and double-click on a message to send it Use buttons at right to add or remove Quick Messages QSTs Various types of bulletins can be sent periodically, May contain: a string of text, the contents of a text file, your current position, the position of a station or static location in the map window, the current temperature at an airport, or an RSS or CAP feed Use the add button to create a new QST
5 CHAT Window [Tab](continued) Filters (3 types) Incoming chat text from all active ports goes to Main area in the chat window. For large amounts of activity, it may be desirable to sort incoming Chat text using Filters Filter strings used to parse incoming text and divert it into other areas in the chat window Filters (when established) appear as Tabs at the bottom of the Chat window Filter tabs may be dragged and dropped to change their order Add Filter Click Add Filter and enter a string of text. Any incoming Chat messages containing text matching the filter sent to the filter tab and not the main area. In the above example, any Chat message containing [QST] is sent to the filter Tab. Channels A variation on the filter concept allows you to create channels within the Chat window. Multiple stations with a similar task may be grouped together or communications with a specific location can be separated from the Main traffic area. Example: Any station may communicate directly with the EOC or the Hospital during a Search & Rescue operation. Private Chat The third version allows you create a private channel with another station
6 5. FILES Window [Tab] Transfer files from one station to another using D-STAR radio or the Internet Left side of the screen shows files in your local sharing folder (defined in Preferences>Path) Right side of the screen displays files in the remote stations sharing folder
7 FILES Window [Tab](continued) To transfer from an online station: Use the drop down arrows right side of screen to select a station and the port Click on connect button Remote stations file list will soon appear on the right side of the screen [Screen shows that I selected Port W5MPZ, Station W5MPZ-R, connect and files available on W5MPZ-R]
8 FILES Window [Tab](continued) To retrieve a file, highlight it and click download To send a file to the remote station, highlight a file in your local list and click upload Lower left windows shows the two D-RATS programs (yours and the remote) handshaking Be sure to click on the disconnect button when you are finished exchanging files with a station Note: Lower left window shows everything put into the Event Log Tab
9 FILES Window [Tab](continued) Event Log Tab is a list of all transactions that have taken place on the port or ports you are connected to. This is useful for troubleshooting and gaining knowledge about how D-RATS works behind the scenes. You can t edit or copy this screen.
10 6. MESSAGES Window [Tab] Prior to using the MESSAGES tab, you must configure your Outgoing and Accounts. After doing so, you should confirm that POP is enabled in your Gmail Account. To do so, log into your Gmail account, go to Settings>Forwarding and POP/IMAP and check that POP is enabled. Where all pre-formatted messages are sent and received Looks like and functions as client software User can exchange pre-formatted messages with: Other D-RATS users; Internet servers; and WinLink 2000 System (WL2K) RMS stations or CMS servers. To send and receive internet , you must enter incoming and outgoing server information in Preferences window D-RATS only sends and receives plain text, and does not support HTML based For this reason you should set up an account just for use with D-RATS, e.g.
11 MESSAGES Window [Tab](continued) Other D-RATS users using New>memo (Informal Memo form) o Sends a memo to another online Station Fill in Form with final destination Call sign Note: One can Send, Save (goes into the Draft box), Send via or Print (shows on screen) Remember, you don t need to be a ham to use D-RATS to send a memo
12 MESSAGES Window [Tab](continued) Other D-RATS users Used Send so memo will stay in the Outbox until W5SAF comes online on W5MPZ
13 SEND via Note: Send via calls up the Enter destination window In the following Window, I have selected W5SAF (online in the Station Panel). The sent by Send via will first go to the Destination station (e.g. W5SAF) by the designated port. The designated port must have already identified the sender station in Preferences> access to enable reception of the . Since the messages is an , the destination station will see the message in his/her Outbox and can then send via his/her internet server. If the Port wasn t to a RATflector (via the internet) but rather a radio (a connected D-STAR), then Send via allows a bridge by the RF segment over areas with internet outage.
14 MESSAGES Window [Tab](continued) Internet address using New> ( Message) o Sends an to the SMTP server defined in your Preferences>Network>Outgoing (e.g. SMTP.GMAIL.COM) o Note: you can only have one Outgoing server defined but many Preferences>Network> Accounts (e.g. POP3.GMAIL.COM) Fill in Form with final destination address
15 MESSAGES Window [Tab](continued) Internet address Used Send so appears in the Outbox and then disappears (has been sent) Can be seen in the Sent box
16 MESSAGES Window [Tab](continued) WinLink 2000 System (WL2K) RMS stations or CMS servers using New> ( Message) o Sends an to the WL2K server defined in your Preferences>Messages Note: You must have a registered WL2K address, e.g. Note: So you must be a ham o In order for D-RATS to know this is a WL2K and not a normal , you must preface the address with WL2K:
17 Winlink 2000 (WL2K) is a worldwide system of volunteer sysops, radio stations and network assets supporting by radio, with non-commercial links to internet . The system provides valuable service to emergency communicators and to licensed radio operators without access to the internet. You must hold an Amateur Radio license or be a member of a supported organization or agency to use the Winlink 2000 system. Usage and software is free for all who qualify. This is the RMS Express Window for N4VIP using Telnet WL2K.
18 7. MAP including Map Downloader Map Downloader o Must define Map Storage Path (Preferences>Paths) o Must run Map Downloader one time Enter your latitude, longitude and max zoom 15, then Start Download takes a long time and puts maps into your Map Storage Path Map (View, Map), drag as wide as possible and height to your screen Note: Stations (My station N4VIP) selected with zoom 15
19 Map (continued) SFARES QTHs (all the QTHs for SFARES members) selected and zoom 10 Key NM SAR Ham Repeaters selected and zoom 8
20 Map (continued) Key NM SAR ham repeaters selected, zoom 8 and mouse hovering over Farmington ARES repeater Note: Info State Police Dist 10
21 Summary Map provides positional awareness and information. Can see where all online stations are and can see where resources are.
22 Map (continued) D-RATS can import ".csv" files containing static lists of positional information (i.e.: Hospitals, Repeater Sites, EOCs, etc) that can be displayed on the D-RATS Map. See D-RATS Creating Static Overlays.pdf for instructions View of Key NM SAR Ham Repeaters.csv
23 Map (continued) Can export Map (print, save image)
24 8. RF Segment with D-STAR radios First, need to add a new Radio in Preferences, click Add then (Use D-RATS Part IV for D-STAR setup V2.DOC COM port should be a number 4 or less! Baud rate should be 4800 for ID-31A, 9600 for 2820 and 880H. COM port can be seen in Device Manager, use orange cable connection between computer and D-STAR radio
25 Check enabled for ICOM (or however you labeled it) Click Save (only enable the radio for initial checkout)
26 D-Star radio must have low-speed data settings. For example, GPS must be turned off since the lowspeed data goes into the same frames as GPS. Chapter 4 in the ID-31A Advanced Instructions show the various menu settings required for low-speed data transmission. For other D-Star radio, search your manual for low-speed data. For the ID-31A, the settings are: Set the GPS SELECT option to OFF, (MENU > GPS > GPS Set > GPS Select, OFF) Set the GPS OUT option to OFF, (MENU > GPS > GPS Set > GPS Out, OFF) Set the GPS TX Mode option to OFF,(MENU > GPS > GPS TX Mode, OFF) Configure the serial data communication software as follows. Port : The COM port number which is used by the ID-31A/E. Baud rate : 4800 bps Data : 8 bit Parity : None Stop : 1 bit Flow control : Xon/Xoff Function > DATA SPEED > 4800 For the ICOM 880H, the settings for low-speed data are: GPS Tx Off DATATx AUTO MENU (R&S) > GPS > (P&S), GPS Tx OFF MENU > (P&S) > DV SET > MONI (R&S) > DATATx > MONI > AUTO > MONI > MENU Where R&S means rotate the left dial and select, P&S means push the left dial and select.
27 RF Segment with D-STAR radios (continued) Now must setup D-STAR radio For initial checkout, use Simplex a. Pick a repeater frequency and then change offset to (remember to reset after checkout) b. Set power output to Low or SLOW. Test with only one radio CHAT>Right Click Station Pane>Clear All Right Click Station Pane>Ping All Stations (should see your radio transmit) If radio transmits, proper setup Test with two radios and D-RATS (perform on both radios) CHAT>Right Click Station Pane>Clear All Right Click Station Pane>Ping All Stations on both (should see both radios transmit) Should see other stations call sign in Station Pane but not yours (never yours) If both Station Panes show other station, RF Segment now established
28 RF Segment with D-STAR radios (continued) NOTE: WHEN IN THE RF SEGMENT AND USING A D-STAR RADIO, YOU MUST BE A HAM AND CALL SIGN IN D-RATS MUST BE REGISTERED! IN SIMPLEX, IT WILL WORK WITHOUT A CORRECT CALL SIGN BUT YOU ARE VIOLATING FCC RULES. TO USE A REPEATER OR REFLECTOR, CALL SIGN MUST BE REGISTERED AT ONE (AND ONLY ONE) D-STAR REPEATER. ONCE REGISTERED IN A D-STAR REPEATER, THE US TRUST SYSTEM VERIFIES THAT YOUR CALL SIGN IS LEGITITMATE BEFORE ALLOWING YOUR D-STAR RADIO TO TRANSMIT THROUGH ANY REPEATER OR THROUGH A REPEATER AND INTO A D-STAR GATEWAY, I.E. INTO THE INTERNET. Once RF Segment established, you can do anything in the RF Segment you can do via internet, i.e. CHAT, FILES, MESSAGES. However, you must have a good RF link. To check RF link between two stations, you should select the Call Sign in the Station Pane, right click and Test Connectivity.
29 RF Segment with D-STAR radios (continued) Click Start, 10 packets are sent and received and at the end of 10 you will receive a percentage. 70% is OK, 80% is better and 100% is a very good link. 80% or better should allow the RF segment to function properly.
30 9. Trouble shooting 1. General a. The D-RATS download is for a 32 bit Windows operating system. If your Windows operating system is 64 bits, you must install a 64 bit version of lzhuf_1.exe in your Program Files\D-RATS\libexec folder. The 64 bit version is 30K big while the 32 bit version is 29K. 2. CHAT a. Nothing in the Station Pane i. check Preferences to ensure you have checked the correct Radio ii. check lower left CHAT pull down to see that you have selected the correct Radio iii. Right click in Station Pane to Ping All Stations iv. If nothing above works, check to see if you are connected to Internet b. Other stations not receiving your sent Chats i. Check that you are sending to the correct Radio, check lower left pull down c. Don t see chats in Main Window i. Check for filter or channel window, remove filter if necessary 3. FILES a. Don t see your list of shared files, check Preferences to be sure File Transfer Path is defined b. Don t see a list of shared files for other station, check Port and Station Name show in upper right pull downs and that you have connected 4. MESSAGES a. FOR ALL TROUBLES WITH MESSAGES, FIRST CHECK THAT YOU CAN SEND OUT AN TO YOURSELF (GOES TO OUTBOX) AND RECEIVE IT BACK (GOES INTO INBOX). IF THIS DOESN T WORK, NOTHING WILL b. ALSO CHECK THAT YOU ENTERED YOUR CALL SIGN IN ACCESS IN PREFERENCES c. Messages sit in the Outbox but don t go out, check that you have entered correct name and password for SMTP (Outgoing in Preferences) d. Nothing appears in the INBOX when you are certain traffic has been sent to you, check that you have entered correct name and password for POP ( Accounts in Preferences) e. WL2K messages don t leave the Outbox, check that you prefaced with WL2K: 5. MAPS a. No Data appears when you use the Map Function, have you made your initial Map Download? b. Overlays that you have created or are using don t show, ensure that the Overlay is checked in the lower left pane. 6. RF Segment Low speed data communications o GPS must be turned off (there are several settings depending on ICOM model) o Data TX must be Auto (NOT PTT) Test connectivity, 80% or better between stations is necessary
31 10. Resources 1. D-RATS Training Farmington.DOC 2. Gmail accounts for D-RATS.TXT 3. WINLINK accounts for D-RATS.TXT 4. D-RATS_Operating_Guide_Addendum_ PDF 5. showing up in you Outbox in D-RATS.DOC 6. D-RATS&GmailIV.PDF 7. D-RATS configuration Part I Rev 1.DOC 8. D-RATS configuration Part II Rev 1.DOC 9. Key NM SAR Ham Repeaters.CSV 10. D-RATS Creating Static Overlays.PDF 11. D-RATS Installing spelling support.pdf 12. D-RATS_and_packet_radio-The_Third_Way.PDF 13. D-RATS_Basic_ _Procedures.PDF 14. D-RATS_operating_guide_0.3.3.PDF 15. D-RATS Part IV for D-STAR setup V2.DOC
A Communications Tool for D-STAR And much more The Big Picture D-RATS is a communications tool that allows stations to communicate via D-STAR radios using low speed data (DV data mode), Packet Radio and
Alden Oyer, AG5S Santa Fe ARES Assistant Emergency Coordinator For Don Hinsman, N4VIP ARES District Emergency Coordinator 1 ARES MOTIVATION During EOC and SAR Comm activations, need voice and digital modes
BASIC WINLINK 2000 TRAINING GUIDE Lewis Thompson W5IFQ, AAR6UK June 26, 2009 CONTENTS Introduction... 3 About Winlink 2000... 3 Required Equipment... 3 Setting Up Airmail Step by Step...5 Connecting to
User Manual Document Management System Version 1.0 1 of 23 Table of Contents 1. Introduction... 4 2. Objective... 4 3. Login to E-Governance System... 4 4. Document Management System (DMS) in E-Governance
IMAP and SMTP Setup in Email Clients Configuring an Email Client for IMAP Configuring an Email Client for the SMTP Server Overview Internet Message Access Protocol (IMAP), or a remote connection through
User Guide- i.mail enhancement Configure POP/IMAP access using Outlook and Windows Mail Firstly, you need to enable POP/IMAP on your i.mail account: 1. Log into your i.mail account via web 2. Click Mail
Shentel (Shentel.net) Email Quick Start Guide Your new webmail is now powered by Contents If you are forwarding your Shentel.net email to a third party address...2 If you use an email program other than
PRESENTATION FOR INTEGRATION OF GOOGLE APPS EMAIL ACCOUNTS WITH MS OUTLOOK We Welcome You to Guidelines for Integrating Google Apps Email Accounts with MS Outlook 2003 3/10/2008 Ashi Avalon - Integration
Thomas G. Broxholm Setting Up Outlook Mail Accounts Outlook Open the Windows Control Panel and double click on the Mail icon. Note! For 64 bit Windows users. The mail icon could be found inside a folder
Webmail Instruction Guide This document is setup to guide your through the use of the many features of our Webmail system. You may either visit www.safeaccess.com or webmail.safeaccess.com to login with
Using SSH Secure Shell Client for FTP The SSH Secure Shell for Workstations Windows client application features this secure file transfer protocol that s easy to use. Access the SSH Secure FTP by double-clicking
Outlook Express Open up Outlook Express From the Menu Bar Tools to Accounts - Click on Mail Tab Click on mail.btconline.net mail (default) Click on Properties button Click on the General tab User Information
How to move email to your new @students.ecu.edu account with MAC Mail 1. Open Mail, and then do one of the following: If you've never set up any e mail accounts using Mail, the Welcome to Mail page appears.
How to Set Up Your Email Account Contents Outlook 2002 (Office XP)... 3 Outlook 2003 (Office 2003)... 6 Outlook 2007 (Office 2007)... 10 Outlook 2010 (Office 2010)... 14 Outlook Account Setup Page 2 HOW
User's Guide Using RFDBManager For 433 MHz / 2.4 GHz RF Version 1.23.01 Copyright Notice Copyright 2005 Syntech Information Company Limited. All rights reserved The software contains proprietary information
Atlantic Broadband s free Webmail service makes it easy to read and send email using just a web browser from any computer. This quick reference guide will help you get the most out of Webmail with useful
efiletexas.gov Review Queue User Guide EFS-TF-200-3194 v.4 February 2014 Copyright and Confidentiality Copyright 2014 Tyler Technologies, Inc. All rights reserved. All documentation, source programs, object
Creating Acrobat Forms Acrobat 9 Professional Acrobat forms typically have an origin from another program, like Word, Illustrator, Publisher etc. Doesn t matter. You design the form in another application
KRAMER ELECTRONICS LTD. USER GUIDE Ethernet Configuration Guide (Lantronix) P/N: 2900-300321 Rev 6 Contents 1 Connecting to the Kramer Device via the Ethernet Port 1 1.1 Connecting the Ethernet Port Directly
USING YOUR GMAIL ACCOUNT FOR SCRUBBING YOUR REGULAR EMAIL OF SPAM Beginners Kaffee Klatch Presented by Bill Wilkinson The Gmail spam filter is highly acclaimed by many experts in the security and privacy
To Set Up Your E-mail Account in Microsoft Outlook 2003 1. Open Microsoft Outlook 03 3. On the E-mail Accounts wizard window, select Add a new e-mail account, and then click Next. 4. For your server type,
507-214-1000 This information is provided for informational purposes only. The following guide will show you how to set up email in various email programs. The Basic Email settings for all email addresses
Using Webmail Technical Manual: User Guide Webmail is supported in the following browsers: Windows Internet Explorer 6, Internet Explorer 7, Firefox 2, and Firefox 3 Mac OSX Safari 2, Safari 3, Firefox
1 Email Update Instructions Contents Email Client Settings The Basics... 3 Outlook 2013... 4 Outlook 2007... 6 Outlook Express... 7 Windows Mail... 8 Thunderbird 3... 9 Apple Mail... 10 Apple Mail 8.2...
Exchange 2010 Outlook Profile/POP/IMAP/SMTP Setup Guide September, 2013 Exchange 2010 Outlook Profile/POP/IMAP/SMTP Setup Guide i Contents Exchange 2010 Outlook Profile Configuration... 1 Outlook Profile
TM SECURITY SYSTEM MANAGEMENT SOFTWARE FOR WINDOWS Quick Start Instructions Introduction WinLoad for Windows was developed to simplify and speed up the task of programming Paradox control panels. Remote
SMS Database System Quick Start [Version 1.0.3] Warning ICP DAS Inc., LTD. assumes no liability for damages consequent to the use of this product. ICP DAS Inc., LTD. reserves the right to change this manual
SETTING UP YOUR REMOTE DESKTOP This section will assist you in setting you Remote Desktop Connection. This will allow you to create an icon for easy access to your virtual desktop. DISCLAIMER: All images
Connecting Microsoft Outlook Express to an POP3 server. Pre-requisites: That the MPDS terminal is already connected to the Internet as described in other integration documents, Microsoft Outlook is Installed,
Create Mail Profiles for Gmail, Yahoo or Hotmail Accounts for Outlook Windows 1 Create Mail Profiles Firstly select the start menu and open control Panel. In the control panel window select Mail (32-bit)
405-375-0786 1-800-375-8903 www.pldi.net HIGH-SPEED INTERNET Connection and Windows Mail Set Up for Windows Vista Users Page 1 Form # PLD 475 01-10 1. To set up a Pioneer High-Speed Internet connection
Table of Contents Chapter 1. User Interface Overview...5 Chapter 2. Installation...6 2.1 Beginning Installation...6 2.2 Starting the CMS software...10 2.3 Starting it from the Start menu...10 2.4 Starting
idvr-pro Viewer Software for Mac User Manual ver 0.1 1 Contents 1. Introduction... Error! Bookmark not defined. 1.1 Summary... Error! Bookmark not defined. 2. Install... Error! Bookmark not defined. 2.1
For getting started with Ham Radio Sound Card digital modes. Jeffrey Kopcak K8JTK Table of Contents Introduction... 3 Program versions... 3 Resources... 3 SignaLink... 3 Rigblaster... 3 Configuration...
Outlook Express Open up Outlook Express From the Menu Bar Tools to Accounts - Click on Mail Tab Click on mail.nefcom.net (default) Click on Properties button Click on the General tab User Information E-mail
Versions Addressed: Microsoft Office Outlook 2010 Document Updated: 8/31/2012 Copyright 2012 Smarsh, Inc. All rights Purpose: This document will assist the end user in configuring Outlook 2010 to access
Let's Begin: Log In and Set Up Security Questions To start, you can log in from the ProMailSource home page. Sending an Encrypted/Unencrypted Message Every message you send through ProMailSource is automatically
Configuring Outlook 2016 for Windows This document assumes that you already have Outlook 2016 installed on your computer and you are ready to configure Outlook. Table of Contents Configuring Outlook 2016
Adobe Acrobat Professional X Part 3 - Creating Fillable Forms Preparing the Form Create the form in Word, including underlines, images and any other text you would like showing on the form. Convert the
Email -- Reading and Printing Email Checking for New Email By default, webmail checks for new email automatically. If you want to manually check for new email, click the Check Email button. Or, click the
Organizing and Managing Email Outlook provides several tools for managing email, including folders, rules, and categories. You can use these tools to help organize your email. Using folders Folders can
How to set mail account on Outlook Express to read and send mail (for CSA/CSD users) Your CSA/CSD account is also a mail service that enables you to get mail sent to email@example.com, read
Jim McKnight www.jimopi.net Thunderbird_Setup.lwp revised 12-11-2013 (Note1: Not all sections have been updated for the latest version of Thunderbird available at the time I verified that Section. Each
How to set up your Secure Email in Outlook 2010* This guide is for hosting clients who are hosting their email with us. If you are using a third party email, you should not use these instructions. 1. Open
Using Webmail Technical Manual: User Guide Webmail is supported in the following browsers: Windows Internet Explorer 6, Internet Explorer 7, Firefox 2, and Firefox 3 Mac OSX Safari 2, Safari 3, Firefox
APSCN VPN Instructions for VPN Setup on Windows and MAC OS Updated 8/18/2015 Windows 10 and Windows 8/8.1 Table of Contents APSCN VPN Settings for Windows 10... 2 1. Creating a VPN Connection... 2 2. Disconnecting
Novell ZENworks Asset Management 7.5 w w w. n o v e l l. c o m October 2006 USING THE WEB CONSOLE Table Of Contents Getting Started with ZENworks Asset Management Web Console... 1 How to Get Started...
Chapter 9 Monitoring System Performance This chapter describes the full set of system monitoring features of your ProSafe Dual WAN Gigabit Firewall with SSL & IPsec VPN. You can be alerted to important
CET442L Lab #2 IP Configuration and Network Traffic Analysis Lab Goals: In this lab you will plan and implement the IP configuration for the Windows server computers on your group s network. You will use
Using Webmail Technical Manual: User Guide The Webmail Window To save an attachment: 1. Click once on the attachment name. Or, if there are multiple attachments, click the Save icon to save all attachments
Contents Page Q. How do I access my email? Q. How do I change or reset a password for an email account? Q. How do I forward or redirect my messages to a different email address? Q. How do I set up an auto-reply
Neoteris IVE Integration Guide Published Date July 2015 The Secure Email Client upgrade option enables Neoteris IVE users to use standards based email clients to access corporate email from remote locations.
RSCCD REMOTE PORTAL The RSCCD Remote Portal allows employees to access their RSCCD Email (via Outlook Web Access), Department (Public) Folders, Personal (H Drive) Folder, and the District Intranet from
Standard Mailbox Email Software Setup Guide Standard Mailbox Setup Guide Setting up a Standard mailbox only takes a few minutes. You can set up any email software to receive email from your mailbox. This
Releasing blocked email in Data Security IN-TopicInfo:Topic 41101/ Updated: 02-May-2011 Applies To: Websense Data Security v7.1.x Websense Data Security v7.5.x Websense Data Security v7.6.x - v7.8x SMTP
MODEL ATC-2004 TCP/IP TO RS-232/422/485 CONVERTER User s Manual 1.1 Introduction The ATC-2004 is a 4 Port RS232/RS485 to TCP/IP converter integrated with a robust system and network management features
i-stat TECHNICAL BULLETIN Configuring Wireless Settings in an i-stat 1 Wireless Analyzer Before configuring wireless settings, please enable the wireless functionality by referring to the Technical Bulletin
Mail Chimp Basics Mail Chimp is a web-based application that allows you to create newsletters and send them to others via email. While there are higher-level versions of Mail Chimp, the basic application
owncloud Configuration and Usage Guide This guide will assist you with configuring and using YSUʼs Cloud Data storage solution (owncloud). The setup instructions will include how to navigate the web interface,
MAC1028 June 2007 Getting Started with Thunderbird 2.0 For Macintosh OS X Author: John A. Montgomery Adapted to OS X by: Peter Lee Revised by Mitchell Ochi and Deanna Pasternak Introduction...1 POP and
Grapevine Mail User Guide Table of Contents Accessing Grapevine Mail...2 How to access the Mail portal... 2 How to login... 2 Grapevine Mail user guide... 5 Copying your contacts to the new Grapevine Mail
nctv.com Email Quick Start Guide Your new webmail is now powered by Contents If you are forwarding your nctv.com email to a third party address...2 If you use an email program other than Webmail from nctv.com..5
Using Remote Web Workplace Version 1.01 Remote web workplace allows you to access your Windows XP desktop through Small Business Server 2003 from a web browser. 1. Connect to the Internet in your remote
Outlook XP Email Only Table of Contents OUTLOOK XP EMAIL 5 HOW EMAIL WORKS: 5 POP AND SMTP: 5 TO SET UP THE POP AND SMTP ADDRESSES: 6 TO SET THE DELIVERY PROPERTY: 8 STARTING OUTLOOK: 10 THE OUTLOOK BAR:
Salmar Consulting Inc. Setting up Outlook Express to use Zimbra Marcel Gagné, February 2010 Here are the steps to configure Outlook Express for use with Salmar's Zimbra server. Open Outlook Express. Select
SECURITY SYSTEM MANAGEMENT SOFTWARE FOR WINDOWS WINLOAD MODEM SETUP The modem setup is a very important step in the connection process. If the modem setup is not properly completed communication between
Microsoft Outlook 2010 a. Open Outlook 2010. b. Click File i. Select Info. ii. Within Account Information, click Add Account. c. Within the Setup wizard select Manually configure server settings or additional
EasyMP Monitor Operation Guide Ver.4.53 2 Notations Used in This Guide The following table shows the symbols used in this manual, along with descriptions of what they mean. q s Indicates additional information
How To Configure Email Using Different Email Clients This document will show step by step instructions for setting up and updating email accounts using different Email Clients. Always remember to verify
Email Client Configuration Guide Table of Contents Email Configuration...3 Email settings...3 IMAP...3 POP...3 SMTP...3 Process Overview...5 Account set up wizards...5 Anatomy of an email address...5 Why
Center for Faculty Development and Support Gmail Overview Table of Contents Gmail Overview... 1 Overview... 3 Learning Objectives... 3 Access Gmail Account... 3 Compose Mail... 4 Read and Reply Mail...
MICROSOFT OUTLOOK 2011 GETTING STARTED AND HELP RESOURCES Lasted Edited: 2012-07-10 1 Introduction... 4 Getting Started... 4 Tour of the Outlook 2011 Interface... 4 Start Outlook 2011... 5 Configure E-mail
Email Set Up Instructions Email Support...1 Important Fist Steps for all Users...2 DO YOU KNOW YOUR USERNAME AND PASSWORD?...2 Install the Despaminator CompanyV Certificate...2 What is Your Mail Client?...2
Set up Outlook for your new student e mail with IMAP/POP3 settings 1. Open Outlook. The Account Settings dialog box will open the first time you open Outlook. If the Account Settings dialog box doesn't
EasyMP Monitor Operation Guide Ver.4.50 Notations Used in This Guide The following table shows the symbols used in this manual, along with descriptions of what they mean. Attention s Indicates procedures
Using TLS encryption with OS X Mail This guide assumes that you have already created an account in Mail. If you have not, you can use the new account wizard. The new account wizard is in the Accounts window
STAFF MAIL User Guide Please see the next page for an important note Important note: This user guide was written to support the use of the original Staffmail system. A newly rewritten version is in preparation
Outlook Connector Installation & Configuration groupwaresolution.net Hosted MS Exchange Alternative On Linux Page 1 of 5 DOWNLOAD Please download the connector installer msi file and save it to your computer.