The Glitch360Spi 3.0 rev b is a HiSpeed USB2 SPI programmer, it can use any existing protocols (SPI, JTAG, BitBang, etc )

Transcription

1 GLITCH360SPI 3.0 (rev b) MANUAL v1.9 FOR XBOX 360 FAT & SLIM This Manual will explain you how to install the Glitch360Spi 3.0 (rev b) on your xbox 360. For more information about the Reset Glitch Hack check our webpage The Glitch360Spi 3.0 rev b is a HiSpeed USB2 SPI programmer, it can use any existing protocols (SPI, JTAG, BitBang, etc ) If you want to use ergh, please follow this manual : ergh Manual for GLITCH360SPI 3.0 REV B Required Tools - Glitch360Spi 3.0 rev b - 1x Mini usb universal cable - Soldering iron 12/15w + soldering tin - Logiciel GSU - Logiciel GKU And of course one xbox 360 FAT or SLIM Wires install: SLIM: DO > J2C11 / CS > J2C12 / SK > J2C13 / DI > J2C14 / Z > J2C35 / X > J2C36 / 3,3v > J2C37 / GND > J2C312 PHAT: DO > J1D21 / CS > J1D22 / SK > J1D23 / DI > J1D24 / Z > J2B15 / X > J2B16 / 3,3v > J2B17 / GND > J2B112

2 SPI: Using the Glitch360Spi 3.0 rev b to dump your Xbox360 Nand. Using our software GSU, the Glitch360Spi 3.0 rev b can dump a 16MB nand in 65sec* It can dump any motherboard Nand including corona v1 (more information on corona v2 coming soon ). * Dump recorded on a 16MB nand on 64bit Windows Seven. The dump time may change depending on your operating system. Connecting your Glitch360Spi 3.0 to a Slim Xbox 360

3 Connecting your Glitch360Spi 3.0 to a FAT Xbox 360

4 Dual Activity LED Glitch360Spi 3.0 Flashing green light: Glitch360Spi 3.0 initializing Solid green light: Glitch360Spi 3.0 initialized / Job successfully completed... Flashing red light: Working Solid red light: Error (power, drivers, wires...) / Job aborted. Solid green light: your Glitch360Spi 3.0 is initialized!

5 Dumping your Xbox360 Motherbord Nand using GSU The Glitch360Spi 3.0 rev b is a HiSpeed USB 2 SPI programmer, it dumps a 16MB nand in 65sec* and is compatible with all existing protocols (SPI, JTAG, bitbang, etc...). The Glitch360Spi 3.0 rev b can easily be updated and is fully controlled by our software GSU! Your Xbox 360 must be powered (xbox360 turned off) and your Glitch360Spi 3.0 rev b connected to your computer. * Minimum time for dumping 16MB on Windows Seven 64bit. Dump time varies depending on your operating system. Note: download our software GSU here: Setup Windows Glitch360Shark Updater GSU buttons: Motherboard Nand: Allows you to manage your motherboard s nand Shark: Allows you to manage the Glitch360Shark nand Auto detect: This will automaticly detect your motherboard s nand and set the right size to dump Read: Read the selected nand Write: Write a nand file in the selected nand Write ECC: Write a.ecc file in the selected nand Erase: Erase the selected nand Dump size: Choose the dump size ( Mo) Nbr of dump: Number of dumps (1-10) Nand Checker: This will check if your nand is correct or not by using swizzy s Nand Dump Checker Check Shark: This will check if there is any bad block detected on Your Glitch360Shark Display Debug: If set to on this will display the full xell output into a window Auto Boot: if set to on this will automatically turns on your xbox 360 for accessing Xell. Boot Time: Green : Good 30sec) Orange : Medium 2min), you may review & optimize your modchip wiring Red : Bad 2min), you must review & optimize your modchip wiring

6 E-RGH: Using the Glitch360Spi 3.0 rev B to get CPU & DVD Keys This will allow you to get your CPUKey & DVDKey from any xbox 360 motherboard connected to your Glitch360Spi 3.0 without having to connect your xbox to your network or to your TV! (Great for Corona Motherboards) 1 Connect 2, 4 & E from the Glitch360Spi 3 rev b to your motherboard Trinity diagram Corona diagram

7 Fat motherboard diagram 2- Dump your motherboard, create your.ecc, flash your motherboard and install your glitch modchip (ex : Glitch360key) 3- Set Display Debug and Auto Boot as wanted then click on «Get CPU and DVD Keys» then follow the instructions 4- Use the buttons «CPU/DVD Key», «fuses», «KV» to save your files

8

9 JTAG: Using the Glitch360Spi 3.0 rev b to program any Glitch Modchip Using our second software GKU, the Glitch360Spi 3.0 rev b can easily program or update ANY Glitch Modchip (with Xilinx chip). 3 ways are offered QUICK PLUG, FFC Connector or soldering your Glitch Modchip to the Jtag Outputs Using the Quick Plug. Solder the Quick Plug connector (provided) on the Glitch360Spi 3.0 and simply plug in your Glitch Modchip then connect your Glitch360Spi 3.0 to your computer. This is a smart and fast way to program your Glitch Modchip (this works with most Modchips using a regular jtag connector) Using the FFC Connector (for Glitch360key). Connect the FFC flex wire between the Glitch360Spi 3.0 and your Glitch360Key. Connect your Glitch360Spi 3.0 to your computer. Using the 6x JTAG Outputs (if your Modchip doesn t have a JTAG connector). Connect your Gitch360Spi 3.0 and your Glitch Modchip using the provided colored wires (see picture below). Connect your Glitch360Spi 3.0 to your computer.

10 Programming your Glitch Modchip using GKU Note: Download our software GKU here: Setup Windows Glitch360Key Updater Your Modchip must be connected to the Glitch360Spi 3.0 and plugged to your computer by USB. Classic View Expert View GKU buttons: FAT SLIM: Choose your Xbox 360 Select a file/selection your motherboard: Select the Glitch Modchip firmware for your motherboard [...] : Allows you to open a personalized.svf file Timing optimization [ ] : Choose your RGH timing / Optimisation timing FLASH / UPDATE: Program your Glitch Modchip using the selected firmware Flash: Program your Glitch Modchip using the selected firmware Identify: Identify the current firmware of your Glitch Modchip Erase: Erase your Glitch Modchip : Detect Glitch360Spi 3.0 / Glitch360Prog device : More information about your Glitch Modchip

11 Copyrights Glitch360Team V1.9 Glitch360Spi 3.0 rev b Xbox 360 Fat & Slim Seb117, ZackWarrior, Elyot Made in FRANCE