Core will be accepted for surcharge credit based on our identification, subject to our normal core quality acceptance criteria and eligibility.

Transcription

1 Back in box REMY DISTRIBUTOR INSTALLER BOX Back in box, protecting your returns. Benefits: 1. Easy to manage and follow-up administratively. 2. You are sure that you get the correct core back from your customer. 3. The quality of the core is better protected. CORE BOX REMY DISTRIBUTOR INSTALLER Core will be accepted for surcharge credit based on our identification, subject to our normal core quality acceptance criteria and eligibility. Graphics used in this scheme are for illustration only, the process is valid for all product groups.

2 Core return policy CORE ACCEPTANCE CRITERIA NO CREDIT OK IN A REMY BOX NOT IN A BOX IN ANOTHER BOX PN ELIGIBILITY OK * * OK CREDIT CORE BANK OE NR. ON CORE CORRESPONDS TO SALES PN ON THE BOX (INCL. ALTERNATIVES) OK OK GROUP ELIGIBILITY Acceptance Criteria As stated in catalogues and on core criteria poster, based on the Remy Core Acceptance Criteria Eligibility: based on 24 months rolling 1. Part number level For each part number, the number of returned cores cannot exceed the number of purchased units 2. Group level Within each product group, the number of returned cores cannot exceed the number of purchased units Alternatives Correspondence between the OE number on the core and the sales part number on the box will not only be checked in a direct way but also through alternative families. Core bank Surcharge will be credited if eligibility becomes positive within 24 months. Credit Normal surcharge will be credited for remanufactured units, with potential deductions (e.g. missing fan) as described in the Remy Core Acceptance Criteria Important additional information: For accepted warranty or finished goods returns relating to an approved stock order by Remy, the eligibility will not be reduced if the stock return relates to units outside the 24 months period. Transportation to Remy will be organized and paid by Remy providing full pallet quantities Remy is entitled to modify the core prices in accordance with the market. Returned cores will be credited at the invoiced prices per PN. The total number of cores returned exceeding the number of goods purchased within one calendar year require Remy s authorization. Remy is not obliged to take back core upon the termination of business relationship. * at Remy s discretion

3 Core acceptance procedure Starters and Alternators CORE OE N O ON CORE LISTED IN CORE ACCEPTANCE GUIDE* NO REMY LABEL ON THE CORE (BARCODE) NO YES YES REFUSED CORE ACCEPTANCE CRITERIA OK CREDIT CORE WILL BE REFUSED WHEN: broken / damaged burned / blocked dismantled corrosion no surcharge partnumber incomplete CORE WILL BE CREDITED FOR ALTERNATORS WITH REDUCTION OF 5,00 EURO WHEN: missing fan missing pulley * EXCEL file will be ready in the near future

4 Core Acceptance Criteria Starters and Alternators To allow us to remanufacture your units, please follow the acceptance criteria when returning your core. Your core part will not be credited whenever the following defaults occur: Broken / Damaged Burned / Blocked ALTERNATOR STARTER ALTERNATOR STARTER Dismantled / Incomplete Corrosion ALTERNATOR STARTER ALTERNATOR STARTER

5 Where to find the OE-reference Where to find the OE-reference A B A B xxxxx xxxxx C xxxxx xxxxx xxxxx E C D E D O.E.M. reference Replaced by STARTER ALTERNATOR Position Example Position Example BOSCH (BO) E B DAIHATSU E B DELCO-REMY (DR) D 165( ) A 033(930830) DUCELLIER (DU) VALEO (VA) D 6216, C 7577, FEMSA (FE) D/E MTS12-47 C/D/E ALS12X-76 FIAT (FI) B/E B/A FORD D 71BB LB B 81AB AC HITACHI (HI) D S A/E LR HONDA B E PB2-004 ISKRA (IS) B AZF3-519 B AAK1181 LUCAS (LU) D/E LRS 415 B/C LRA 396 MARELLI (MM) B/E B/C/E MANDO (MD) E AB MAZDA B/E F A E MITSUBISHI (MI) B/E M2T30581/MD B/C/E A5T10271 MOTOROLA (MO) B/C 9AL2679K NIPPON DENSO (ND) E B NISSAN (NI) B/D M8100 A/E H7206 PAL (PA) B PARIS RHONE (PR) VALEO (VA) D D8E63 B/C A13N135 TOYOTA E E SEV MARCHAL (SEV) VALEO (VA) B/C FORD (VISTEON) E Any and all references to manufacturer names and numbers are used for cross-reference purposes only and no claim is made as to the origin of manufacture for said products.

6 Examples of how to recognize an original part

7 Core Acceptance Criteria Steering Racks To allow us to remanufacture your units, please follow the acceptance criteria when returning your core. Your core part will not be accepted whenever the following defaults occur: Damaged casing / casting Holes / parts damaged Splines / Threads damaged Distorted component Rusty rack bar Missing parts Scrap yard burn offs Tie rods bent Accident damage

8 Core Acceptance Criteria Steering Pumps To allow us to remanufacture your units, please follow the acceptance criteria when returning your core. Your core part will not be accepted whenever the following defaults occur: Damaged casing Damaged hub Severely oxidised Pipe broken Mounting hole damaged Pulley damaged Pipe damaged Terminals missing only electrical steering pumps

9 Core Acceptance Criteria Brake Calipers To allow us to remanufacture your units, please follow the acceptance criteria when returning your core. Your core part will not be accepted whenever the following defaults occur: Cracked core Distorted hole Broken lugs Damaged threads Hole in core Severely worn

10 Core Acceptance Criteria Ignition Distributors To allow us to remanufacture your units, please follow the acceptance criteria when returning your core. Your core part will not be accepted whenever the following defaults occur: Dismantled Unit Broken shaft Broken lug Damaged casting Broken housing Damaged casing / hole Bracket damaged