Teradata Managed Server for Cabinet and Server, Models 4X5, 4X7, and 6X7 Product and Site Preparation Guide B K September 2011

Transcription

1 Teradata Managed Server for Cabinet and Server, Models 4X5, 4X7, and 6X7 Product and Site Preparation Guide B K September 2011

2 The product or products described in this book are licensed products of Teradata Corporation or its affiliates. Teradata, BYNET, DBC/1012, DecisionCast, DecisionFlow, DecisionPoint, Eye logo design, InfoWise, Meta Warehouse, MyCommerce, SeeChain, SeeCommerce, SeeRisk, Teradata Decision Experts, Teradata Source Experts, WebAnalyst, and You ve Never Seen Your Business Like This Before are trademarks or registered trademarks of Teradata Corporation or its affiliates. Adaptec and SCSISelect are trademarks or registered trademarks of Adaptec, Inc. AMD Opteron and Opteron are trademarks of Advanced Micro Devices, Inc. EMC, PowerPath, SRDF, and Symmetrix are registered trademarks of EMC Corporation. Hewlett-Packard and HP are registered trademarks of Hewlett-Packard Company. Intel, Pentium, and XEON are registered trademarks of Intel Corporation. IBM, CICS, RACF, Tivoli, and z/os are registered trademarks of International Business Machines Corporation. Linux is a registered trademark of Linus Torvalds. LSI is a registered trademark of LSI Corporation. Microsoft, Active Directory, Windows, Windows NT, and Windows Server are registered trademarks of Microsoft Corporation in the United States and other countries. NetVault is a trademark or registered trademark of Quest Software, Inc. in the United States and/or other countries. Novell and SUSE are registered trademarks of Novell, Inc., in the United States and other countries. Oracle, Java, and Solaris are registered trademarks of Oracle and/or its affiliates. Oracle GoldenGate is a trademark of Oracle. QLogic and SANbox are trademarks or registered trademarks of QLogic Corporation. SAS and SAS/C are trademarks or registered trademarks of SAS Institute Inc. SPARC is a registered trademark of SPARC International, Inc. Symantec, NetBackup, and VERITAS are trademarks or registered trademarks of Symantec Corporation or its affiliates in the United States and other countries. Unicode is a registered trademark of Unicode, Inc. in the United States and other countries. UNIX is a registered trademark of The Open Group in the United States and other countries. Other product and company names mentioned herein may be the trademarks of their respective owners. The information contained in this document is provided on an as-is basis, without warranty of any kind, either express or implied, including the implied warranties of merchantability, fitness for a particular purpose, or non-infringement. Some jurisdictions do not allow the exclusion of implied warranties, so the above exclusion may not apply to you. In no event will Teradata Corporation be liable for any indirect, direct, special, incidental, or consequential damages, including lost profits or lost savings, even if expressly advised of the possibility of such damages. The information contained in this document may contain references or cross-references to features, functions, products, or services that are not announced or available in your country. Such references do not imply that Teradata Corporation intends to announce such features, functions, products, or services in your country. Please consult your local Teradata Corporation representative for those features, functions, products, or services available in your country. Information contained in this document may contain technical inaccuracies or typographical errors. Information may be changed or updated without notice. Teradata Corporation may also make improvements or changes in the products or services described in this information at any time without notice. To maintain the quality of our products and services, we would like your comments on the accuracy, clarity, organization, and value of this document. Please teradata-books@lists.teradata.com Any comments or materials (collectively referred to as Feedback ) sent to Teradata Corporation will be deemed non-confidential. Teradata Corporation will have no obligation of any kind with respect to Feedback and will be free to use, reproduce, disclose, exhibit, display, transform, create derivative works of, and distribute the Feedback and derivative works thereof without limitation on a royalty-free basis. Further, Teradata Corporation will be free to use any ideas, concepts, know-how, or techniques contained in such Feedback for any purpose whatsoever, including developing, manufacturing, or marketing products or services incorporating Feedback. Copyright 2011 by Teradata Corporation. All Rights Reserved.

3 NOTICE This is a contractual document. It contains important warnings and confers important legal rights and obligations. You are advised to read it carefully. It is the responsibility of the customer to assure that all installation preparations are complete and in compliance with Teradata Corporation specifications and requirements and all applicable national, state, or local codes, regulations, and laws. SITE PREPARATION This document contains the information necessary for the preparation of a site conforming to Teradata Corporation specifications. It is very important that the site complies with the requirements specified in this document because, once the equipment has been installed, deficiencies in site preparation or the problems caused by these deficiencies are much more difficult to detect and correct. Failure to comply with these requirements or take proper steps to protect equipment against risks identified in this document may cause serious damage to the equipment and to the customer's business. In addition to the need to comply with the requirements specified, electrical wiring and mechanical systems must also comply with all relevant codes, laws, and regulations. It is important that the site be prepared by a customer or his agent who is fully conversant with the special requirements of electronic equipment. The responsibility for ensuring that the site is prepared in compliance with this document remains with the customer. For information and guidance purposes only, a list is provided, in general terms, of these matters for which the customer is responsible. This list is not intended to be comprehensive, and in no way modifies, alters, or limits the responsibility of the customer for all aspects of adequate site preparation. Teradata staff will be available to answer questions relating to the contents of this document, except where: The customer has been notified that a full or partial consultant service is available and/or that Teradata will be willing to undertake a preliminary or final site survey, and The customer shall have entered into a formal contract with Teradata for provision of the same. No comment, suggestion, or advice offered or not offered about preparation of the site, nor any inspection of the site whether before or after preparation, is to be taken as approval of the location of the site and equipment, or of its preparation, and Teradata will not be liable in respect of any comment, suggestion, or advice given by its staff, or in respect of any failure to give advice. Problems caused by a customer s failure to meet any of the site prep requirements may result in Teradata: Charging the customer for additional services, Reclassifying a reported problem priority, and/or Being relieved of the obligation to perform services. Finally, only the customer can know the full extent of damage which may be caused to his business by reason of failure of equipment which is to be installed. For this reason it is the customer's responsibility to ascertain the extent of any such possible damage to his existing or planned business, and to effect full insurance in respect of it. CUSTOMER RESPONSIBILITIES The customer must do or provide the following: When required by Teradata, provide the Teradata customer service representative with appropriate drawings that indicate: Location of the equipment Site wiring (power and signal, paths and lengths) Location of other equipment capable of generating electrical noise, electromagnetic interference, heat, etc. Make building alterations necessary to meet wiring and other site requirements. Provide and install all communications cables, wall jacks, special connectors, and associated hardware. Make sure all applicable codes, regulations, and laws (including, but not limited to, electrical, building, safety, and health) are met. Provide and install auxiliary power or other equipment as required. Make sure the environmental requirements of the system/unit are met. Provide floor coverings and environmental systems that limit or control static electricity build-up and discharge.

4 AC POWER LINE TRANSIENT PROTECTION In the process of power distribution, transient electrical energy (including, but not limited to, lightning strikes, intermittent short circuits, and switching transients) can be introduced on to power lines. Such transient energy can be very damaging to electronic hardware and can also cause data corruption. Under these circumstances, Teradata Corporation recommends the use of AC power transient suppressors and data (communication) line transient suppressors. Such protective devices are intended to guard against power and data line transients that can result in hardware damage and various system or program errors. Improvement of any deficiencies in power quality is a customer responsibility. Malfunction and/or component failure as a result of power quality problems are/is not covered by Teradata Maintenance Agreement. Teradata Corporation accepts no liability for any such occurrence nor for its consequences. DATA LINE TRANSIENT PROTECTION The nature of the transient phenomenon may extend to the data communication lines connected to this equipment. It is the responsibility of the customer to install and connect a data line transient suppression system to correct or prevent any deficiencies. Malfunction and/or component failure as a result of data quality problems are/is not covered by the Teradata Maintenance Agreement. Teradata Corporation accepts no liability for any such occurrence or for its consequences.

5 Table of Contents Preface...13 Purpose...13 Audience...13 Prerequisites...13 Revision History...13 Additional Information...13 Chapter 1: Product Information...15 Product Description...15 Cabinet Features Summary...15 Single-Purpose Cabinet Descriptions...18 Cabinet Conventions for Single-Purpose Cabinets...18 BAR Configurations...19 BAR Interconnect...19 TMS Configurations (Viewpoint, SAS, TMSM, Data Mover, Load Server, Unity)...21 Channel Server and ECS Configurations...22 SWS Configurations...23 Multiple-Purpose Cabinet Descriptions...24 Cabinet Conventions for Multiple-Purpose Cabinets...24 Multiple-Purpose Cabinet Configurations...26 Teradata Managed Server Feature Summaries...27 Base Models 405, 407, Viewpoint Models 415, SAS Models 425, Teradata Multi-System Manager (TMSM) Models 435, Data Mover Models 445, BAR Models 455, Load Server Models 465, Unity Model SWS Models 45, Server Management Network Topology...37 Product Statements...38 Regulatory Compliance...38 Declaration of Conformity Product and Site Preparation Guide 5

6 Table of Contents CTick Supplier's Declaration of Conformity China Declaration Certificate...42 China Declaration Certificate (continued)...43 Electromagnetic Compatibility Notices...44 Disclaimer...45 Cautions and Warnings...45 Proper Cooling and Airflow...45 Grounding...45 Rack Stabilization...45 Power On/Off...46 Hazardous Electrical Conditions...46 Electromagnetic Fields and Electrical Noise...46 Input Supply...46 Cabinet Power...46 Chapter 2: Site Preparation Summary...47 Site Preparation Task List...47 Appendix A: Physical Specifications for Site Planning...51 Dimensions for Cabinet: 24 x 43 Inch Rack...51 Cabinet Footprint and Clearances: 24 x 43 Inch Rack...52 Weight and Floor Loading...54 Site Floor and Ceiling Height Specifications...55 Floor Layouts...56 Hardware Placement Guidelines for Raised Floor...56 Hardware Placement Guidelines for Non-Raised Floor...57 Floor Map Tool...58 Cables...58 Cable Management...58 Network Cables and Hardware...59 HCA FICON Cables and Connectors...59 HCA ESCON Cables and Connectors...59 Available Cable Lengths...60 Delivery and Installation...61 Shipping Dimensions and Weights...61 Moving and Handling Guidelines...61 Installation Overview Product and Site Preparation Guide

7 Table of Contents About Environmental Stabilization...62 Seismic Bracing for a Teradata Cabinet...63 Appendix B: Site Power Distribution Planning...65 AC Input Power Distribution...65 Dual AC Concept...65 Site Wiring Options for Dual AC...65 Separate Power Sources...65 Separate Circuit Breaker Panels...66 Two Site UPSs...66 System Load Configurations...66 Site Wiring for System Integrity...66 Input Power Plugs and Receptacles...67 About Grounding...67 Emergency Power Off (EPO)...68 Appendix C: Site Environmental Planning...69 Objectives of Site Environmental Control and Preparation...69 Environmental Requirements...69 Power Consumption...70 Power Measurements for TMS Cabinets at 200V (Japan)...70 Measured Power at 200V for a Fully Configured TMS Cabinet with Two NEMA L6-30P AC Boxes...70 Measured Power at 200V for a Partially Configured TMS Cabinet with Two NEMA L6-30P AC Boxes...71 Power Measurements for TMS Cabinets at 208V (United States and Canada)...72 Measured Power at 208V for a Fully Configured TMS Cabinet with Two NEMA L6-30P AC Boxes...72 Measured Power at 208V for a Partially Configured TMS Cabinet with Two NEMA L6-30P AC Boxes...73 Power Measurements for TMS Cabinets at 230V (Europe)...74 Measured Power at 230V for a Fully Configured TMS Cabinet with Two IEC AC Boxes...74 Measured Power at 230V for a Partially Configured TMS Cabinet with Two IEC AC Boxes...75 System Thermal Report...76 Pre-Installation Environmental Planning Flow Chart...77 Cooling Considerations for Installation Site...78 About Cooling Capacity Planning...78 Disclaimer...78 Product and Site Preparation Guide 7

8 Table of Contents About Cold and Hot Aisles in Floor Layout...78 About Aisle Pitch and Tile Cutouts...79 Best Practices in Floor Layout...80 How to Measure Environmental Elements...83 Environmental Measurement Instruments...83 About Measuring Temperature and Humidity...84 About Measuring Airflow...85 Measuring Air Flow Rate Using an Air Flow Meter and Handmade Air Capture Hood...85 Evaluating Environmental Elements Before and After an Installation...86 Evaluating Air Flow...87 Evaluating Temperature and Humidity...88 About Environmental Contaminants Product and Site Preparation Guide

9 List of Figures Figure 1: Teradata Managed Server Cabinet Configuration - BAR Single-Purpose...19 Figure 2: 2:1 TPA-Node-to-BAR Server Ratio with 2+1 Clique...20 Figure 3: Teradata Managed Server Cabinet Configuration - TMS Single-Purpose...21 Figure 4: Teradata Managed Server Cabinet Configuration - Channel Server and ECS Single-Purpose...22 Figure 5: Teradata Managed Server Cabinet Configuration - SWS Single-Purpose...23 Figure 6: Teradata Managed Server Cabinet Configuration - Multiple-Purpose...26 Figure 7: Teradata Managed Server Cabinet - Server Management Network Topology...37 Figure 8: Cabinet HWD Dimensions: 24 x 43 Inch Rack...51 Figure 9: Footprint and Minimum Clearances for One Cabinet...53 Figure 10: Footprint and Minimum Clearances for Four Ganged Cabinets...54 Figure 11: Recommended Front-to-Front Hardware Placement on Raised Floor...56 Figure 12: Recommended Raised Floor Layout for Optimum Cooling and Airflow...56 Figure 13: Overhead Cold Air Delivery System in Non-Raised Floor Environment...58 Figure 14: Installation Overview...62 Figure 15: Seismic Bracing Tie-Down Points...63 Figure 16: Site Planning Flow Chart...77 Figure 17: Aisle Pitch and Tile Cutout Size/Location...79 Figure 18: Vented Tile Proximity to CRAC (computer room air conditioning)...80 Figure 19: Cabinet Proximity to CRAC...80 Figure 20: Vented Tile Placement in Aisles...80 Figure 21: Cabinet Orientation and Cold Aisle Width...81 Figure 22: Hot Cabinet Distance from CRAC...81 Figure 23: Tile Cutouts...81 Figure 24: Length of Cabinet Rows...82 Figure 25: Dropped Ceiling Return Vent Placement...82 Figure 26: Teradata and EMC Storage Cabinets in Same Site...82 Figure 27: CRAC Placement in Relation to Cabinet Rows...83 Figure 28: Cabinet Placement Adjacent to Walls...83 Figure 29: Temperature and Humidity Measurement Locations Outside Cabinet...84 Figure 30: Handmade Air Capture Hood and Measurement Locations...86 Figure 31: Floor Tiles with Low and High Opening Percentages...89 Product and Site Preparation Guide 9

10 List of Figures 10 Product and Site Preparation Guide

11 List of Tables Table 1: Site Preparation Task List...47 Table 2: 24 x 43 Inch Rack Cabinet HWD Dimensions...52 Table 3: Weight and Floor Loading for Equipment in System...55 Table 4: Available Cable Lengths for Discrete Cables...60 Table 5: Crated Cabinet Dimensions and Weights...61 Table 6: Power Plugs/Receptacles for Canada, Colombia, El Salvador, Japan, Mexico, Nicaragua, Panama, South Korea, Taiwan, United States, and Venezuela...67 Table 7: Power Plugs/Receptacles for Most Countries Other Than Canada, Colombia, El Salvador, Japan, Mexico, Nicaragua, Panama, South Korea, Taiwan, United States, and Venezuela *...67 Table 8: Environmental Specifications...69 Table 9: NEMA AC Boxes, 4 Operational Cords, 200V - Fully Configured Cabinet...70 Table 10: NEMA AC Boxes, Degraded Operation on Two Orange Cords, 200V - Fully Configured Cabinet...71 Table 11: NEMA AC Boxes, Degraded Operation on Two Blue Cords, 200V - Fully Configured Cabinet...71 Table 12: NEMA AC Boxes, 4 Operational Cords, 200V - Cabinet with Chassis 1 to 8, plus 16, 17 and Table 13: NEMA AC Boxes, Degraded Operation on Two Orange Cords, 200V - Cabinet with Chassis 1 to 8, plus 16, 17 and Table 14: NEMA AC Boxes, Degraded Operation on Two Blue Cords, 200V - Cabinet with Chassis 1 to 8, plus 16, 17 and Table 15: NEMA AC Boxes, 4 Operational Cords, 208V - Fully Configured Cabinet...72 Table 16: NEMA AC Boxes, Degraded Operation on Two Orange Cords, 208V - Fully Configured Cabinet...73 Table 17: NEMA AC Boxes, Degraded Operation on Two Blue Cords, 208V - Fully Configured Cabinet...73 Table 18: NEMA AC Boxes, 4 Operational Cords, 208V - Cabinet with Chassis 1 to 8, plus 16, 17 and Table 19: NEMA AC Boxes, Degraded Operation on Two Orange Cords, 208V - Cabinet with Chassis 1 to 8, plus 16, 17 and Table 20: NEMA AC Boxes, Degraded Operation on Two Blue Cords, 208V - Cabinet with Chassis 1 to 8, plus 16, 17 and Table 21: IEC AC Boxes, 2 Operational Cords, 230V - Fully Configured Cabinet...74 Table 22: IEC AC Boxes, Degraded Operation on One Orange Cord, 230V - Fully Configured Cabinet...74 Table 23: IEC AC Boxes, Degraded Operation on One Blue Cord, 230V - Fully Configured Cabinet...75 Product and Site Preparation Guide 11

12 List of Tables Table 24: IEC AC Boxes, 2 Operational Cords, 230V - Cabinet with Chassis 1 to 8, plus 16, 17 and Table 25: IEC AC Boxes, Degraded Operation on One Orange Cord, 230V - Cabinet with Chassis 1 to 8, plus 16, 17 and Table 26: IEC AC Boxes, Degraded Operation on One Blue Cord, 230V - Cabinet with Chassis 1 to 8, plus 16, 17 and Product and Site Preparation Guide

13 Preface Purpose The purpose of this guide is to introduce and define the system architecture and components, and to describe the requirements for preparing a site to receive and install the system. Audience The audience includes, but is not limited to: Customer system administrators and facilities personnel Teradata installation, service, and support personnel Prerequisites You should have access to, or be familiar with, the following: Standard industry terminology System networking protocol Local installation practices for large computer systems Heating, ventilating, and air-conditioning (HVAC) terminology and practices Revision History Date September 2011 January 2011 Description Added the Virtualized Management Server (VMS), BYNET BYA32S switches, Dell R710 Extended Channel Solution (ECS), and Dell R710 channel server Initial release Note: This document replaces the Teradata Managed Server Cabinet for Model 4X5 Product and Site Preparation Guide (B ). Additional Information Product and Site Preparation Guide 13

14 Preface Additional Information Updates and supplementary information are available online index.cfm isupr.cfm Internet site for product, service, resource, support, and other customer information Internet site for published Teradata customer documentation Intranet site for published Teradata service documentation Section of the intranet site for Teradata service documentation specific to software installation and upgrade information Intranet site linking to Teradata software server 14 Product and Site Preparation Guide

15 CHAPTER 1 Product Information Product Description A Teradata Managed Server cabinet (Class 9211) can be added to Teradata platforms. A Teradata Managed Server can be added to processing cabinets and processing/storage cabinets in designated locations in Teradata platforms. This section presents product information about the Teradata Managed Server cabinet and server hardware. Cabinet Features Summary The following table outlines the components that can be installed in the Teradata Managed Server cabinet for models 4X5, 4X7, and 6X7. Feature Teradata Managed Server Feature Description Dell R710 server, for solution offerings that are peripheral to Teradata processing, including: BAR TMS Viewpoint SAS TMSM Data Mover Load Server Unity Features common to all Teradata managed servers: Onboard connectivity to the server management network Not connected to the BYNET network DVD+/-RW ROM SATA internal drive Adapter slots: Two PCIe x4-link Gen 2 expansion slots, full-height (slots 1 and 2) Two PCIe x8-link Gen 2 expansion slots, full-height (slots 3 and 4) 870W redundant power supply with Y-cord For feature summaries specific to each Teradata managed server model (including information about processors, memory, disk drives, and adapters), see Teradata Managed Server Feature Summaries. Product and Site Preparation Guide 15

16 Chapter 1 Product Information Cabinet Features Summary Feature Feature Description Note: An optional USB transport drive is available for customers who require GSC to ship physical media back to Teradata. The kit number for the USB transport drive is A. The kit includes instructions for using the drive. CMIC Node Channel Server Extended Channel Solution (ECS) Intel SR2600 chassis, for server management of cabinet chassis within a collective for redundancy in systems that have only one CMIC in a platform cabinet: Single Intel quad core CPU 12 GB memory in 4 GB DIMMs One SAS drive with CMIC image Linux SLES 11 embedded Server Management Web (SMWeb) Services host Onboard connectivity to server management network; no adapters Intel SR2600 chassis or Dell R710 chassis, configured as dedicated server for interface between Teradata Database and IBM (or compatible) mainframe: Intel SR2600 chassis with: Single Intel quad core CPU 24 GB memory in 4 GB or 8 GB DIMMs Dell R710 chassis with: Single Intel quad core CPU 24 GB memory using 4 GB DIMMs Host channel adapters -- maximum three FICON and/or ESCON adapters (can mix types in same server) No disk array support Onboard connectivity to the server management network BYNET adapter connection to the BYNET network, no AMPs assigned Optional network communication adapter For information about HCA configuration, see the Host Channel Adapter Installation and Service Guide. Note: Although they are not installed at the factory, Intel SR2500 channel servers can be installed in a TMS cabinet at a customer site. Intel SR2600 chassis or Dell R710 chassis, configured as a dedicated server for interface between Teradata Database and IBM (or compatible) mainframe. Intel SR2600 chassis with: Single Intel quad core CPU 24 GB memory in 4 GB or 8 GB DIMMs Dell R710 chassis with: Single Intel quad core CPU 24 GB memory using 4 GB DIMMs Host channel adapters -- maximum three FICON and/or ESCON adapters (can mix types in same node) No disk array support Onboard connectivity to the server management network 16 Product and Site Preparation Guide

17 Chapter 1 Product Information Cabinet Features Summary Feature Feature Description Optional Ethernet network communication adapters -- maximum two adapters (can mix types in same server) For information about HCA configuration, see the Host Channel Adapter Installation and Service Guide. BYNET Interconnect Virtualized Management Server (VMS) Service Workstation (SWS) Redundant BYNET BYA32S switches can be housed in a TMS cabinet: BYA32S switches communicate with a maximum 16 database processing (TPA) nodes, plus an additional 16 nodes that are not database processing but can be BYNETconnected. The database processing (TPA) nodes connected to the BYA32S switches are housed in platform cabinets. A virtualized management server (VMS) is available in System VMS and Cabinet VMS configurations. The VMS can host the following virtual machines (VMs): CMIC -- The CMIC provides server management services for the system cabinets. SWS -- The SWS is the service entry for the system. The SWS VM can manage a system with up to 64 disk arrays. Viewpoint -- The Viewpoint VM manages only a single Teradata system. Each System VMS consists of: CMIC, SWS, and Viewpoint VMs Intel SR1625 chassis Two Intel 2.4 GHz quad-core CPUs 24 GB memory using 4 GB DIMMs Two 300 GB RAID 1 drives for boot/system operations Two 600 GB RAID 1 drives for Viewpoint data storage Onboard connectivity to server management network Onboard or adapter connectivity to customer network OS: Linux SLES 11 OS on VMS and CMIC VM Linux SLES 10 SP3 OS on SWS and Viewpoint VMs Each Cabinet VMS consists of: CMIC VM Intel SR1625 chassis One Intel 2.4 GHz quad-core CPUs 12 GB memory using 4 GB DIMMs Two 300 GB RAID 1 drives for boot/system operations Onboard connectivity to server management network Onboard or adapter connectivity to customer network Linux SLES 11 OS on VMS and CMIC VM Dell R710 workstation dedicated to Teradata system servicing and maintenance: Adapter connection to server management network Linux SLES 10 SP1 or SP3 operating system Product and Site Preparation Guide 17

18 Chapter 1 Product Information Single-Purpose Cabinet Descriptions Feature Feature Description Note: The level of service depends on the service agreement between Teradata and the customer. Note: Although Dell T610 SWS workstations are not installed in a TMS cabinet at the factory, Dell T610 SWSs can be installed in a TMS cabinet at a customer site. Switches Dell Gb 24-port Ethernet switches (one primary, one secondary for server management) Dell Gb 48-port Ethernet switches (number depends on BAR configuration) Blade G Gb 24-port Ethernet switches (number depends on BAR configuration) Brocade port Fibre Channel switch for use in BAR configurations Cable Management AC Power Cable harnesses for power, server management, and (optional) BAR administration. Spaces below BAR switches to accommodate BAR cabling Openings in cabinet sides near the rear of the rack to accommodate inter-rack cabling Two AC boxes of the same type per cabinet. Available AC box types: Two dual cord NEMA L6-30P three-wire AC boxes Two single cord IEC single phase AC boxes Single-Purpose Cabinet Descriptions Cabinet Conventions for Single-Purpose Cabinets The Teradata Managed Server cabinet can be configured as a single-purpose cabinet for BAR configurations, TMS applications (Viewpoint, SAS, TMSM, Data Mover, Load Server, Unity), channel servers and/or ECS servers, and Service Workstation(s) (for servicing and maintenance of a Teradata system). Note: In addition, the Teradata Managed Server cabinet can be configured for multiple uses. See Multiple-Purpose Cabinet Descriptions for the options available in multi-purpose cabinet builds. The placement of the hardware components in a single-purpose cabinet follows these general cabinet build conventions: Each chassis has a standard position in the cabinet, and is numbered from the bottom up. Chassis that are managed over the server management network have assigned chassis ID numbers. The chassis ID number identifies the chassis by position/type in the management interface. Unmanaged chassis are numbered by position for cabling purposes only. The numbers do not appear in the management interface as identification of the chassis. The general build sequence is from bottom up. Ethernet switches are loaded and accessible only from the rear of the cabinet. All other chassis are loaded from the front of the cabinet, and accessible from both front and rear. 18 Product and Site Preparation Guide

19 Chapter 1 Product Information Single-Purpose Cabinet Descriptions BAR Configurations Figure 1: Teradata Managed Server Cabinet Configuration - BAR Single-Purpose Maximum BAR configuration consists of one of the following: * 6 TMS BAR data servers with 6 48-port 1 Gbit switches Primary Server Mgmt Switch Secondary Server Mgmt Switch cabling Brocade 5100 FC Switch optional * 6 TMS BAR data servers with 3 24-port 10 Gbit switches and 3 48-port 1 Gbit switches Optional: * 48-port 1 Gbit admin and data switches in singlecabinet or small Teradata systems * BAR admin server in single-cabinet systems * 40-port Brocade Fibre Channel switch (24 ports active) Required: * TMS BAR admin server in multiple-cabinet Teradata systems BAR Data Server 1 Gb BAR Data Switch cabling BAR Data Server 1 Gb BAR Data Switch cabling BAR Data Server 1 Gb BAR Data Switch cabling one data building block one data building block one data building block * BAR admin switch if a BAR admin server is present 8 BAR Data Server one data building block The BAR data server-toswitch ratio (the data building block) depends on the BAR configuration. Data building blocks consist of 1-4 BAR data servers with 1-2 associated data switches (1 Gbit and/or 10 Gbit) Gb or 10 Gb BAR Data Switch cabling BAR Data Server 1 Gb or 10 Gb BAR Data Switch cabling BAR Data Server one data building block one data building block 3 1 Gb or 10 Gb BAR Data Switch 8 cabling 7 2 BAR Admin Server / BAR Data Server 6 5 optional 1 1 Gb BAR Admin Switch 4 # managed chassis # unmanaged chassis AC Box cabling AC Box Cabinet_0231 BAR Interconnect There are many possible cabinet interconnect configurations. The following configuration, a 2:1 TPA-node-to-BAR server ratio with 2+1 clique, is typical and provided as a guideline. Product and Site Preparation Guide 19

20 Chapter 1 Product Information Single-Purpose Cabinet Descriptions Note: The solid lines around the cabinet in the figure below represent the cabinet boundary. Chassis inside the solid lines are in the cabinet. Figure 2: 2:1 TPA-Node-to-BAR Server Ratio with 2+1 Clique Node Node HSN 1 2 Node Node HSN 3 4 Node Node HSN 5 6 Node Node HSN 7 8 Node Node HSN 9 10 Node Node HSN Node 1 Node 2 HSN Node 3 Node 4 HSN Node 5 Node 6 HSN Node 7 Node 8 HSN Node 9 Node 1 0 HSN Node 1 1 Node 1 2 HSN CMIC 1 0 / S W B A R D a t a S W 1 B A R D a t a S W 2 B A R D a t a S W 3 B A R D a t a S W 4 B A R D a t a S W 5 B A R D a t a S W R a c k Ad m in SW To Admin SW s in other 9211 cabinets External Customer Network B A R S V R 1 B A R S V R 2 B A R S V R 3 B A R S V R 4 B A R S V R 5 B A R S V R 6 BAR Adm in FC A B A B A B Example; not representative D isk A rra y R o b o t ic s D isk A rra y D isk A rra y R o b o t ic s Disk Library Tape Library Disk Library Disk Library Tape Library Cabinet_ Product and Site Preparation Guide

21 Chapter 1 Product Information Single-Purpose Cabinet Descriptions TMS Configurations (Viewpoint, SAS, TMSM, Data Mover, Load Server, Unity) Figure 3: Teradata Managed Server Cabinet Configuration - TMS Single-Purpose Primary Server Mgmt Switch Secondary Server Mgmt Switch TMS TMS TMS TMS TMS TMS TMS TMS # managed chassis # unmanaged chassis AC Box AC Box Cabinet_0229 Product and Site Preparation Guide 21

22 Chapter 1 Product Information Single-Purpose Cabinet Descriptions Channel Server and ECS Configurations Figure 4: Teradata Managed Server Cabinet Configuration - Channel Server and ECS Single-Purpose Maximum configuration consists of one of the following: * 8 channel servers. Note: Intel SR2500 channel servers can be installed at a customer site Primary Server Mgmt Switch Secondary Server Mgmt Switch * 6 ECS servers. Note: If an ECS is installed, a KVM, CMIC, and SWS must also be installed. A CMIC and SWS can be installed in one of the locations indicated by an asterisk. A KVM must be installed in U space 20. This reduces the number of available server slots from 8 to 6. * A combination of channel servers and ECS servers to a maximum of * 14 * * 11 Channel / ECS Channel / ECS Channel / ECS * Channel / ECS * Channel / ECS * Channel / ECS * Channel / ECS * Channel / ECS # managed chassis # unmanaged chassis AC Box AC Box Cabinet_ Product and Site Preparation Guide

23 Chapter 1 Product Information Single-Purpose Cabinet Descriptions SWS Configurations Figure 5: Teradata Managed Server Cabinet Configuration - SWS Single-Purpose * Maximum configuration consists of the following: * 1 KVM * 3 SWSs or System VMSs in any combination. SWSs are managed or unmanaged. * 1 CMIC or 1 Cabinet VMS, but not both Primary Server Mgmt Switch Secondary Server Mgmt Switch Only 1 SWS or System VMS can be attached to the KVM. Additional SWSs and/or System VMSs are accessed through the SWS or System VMS attached to the KVM. 15 * 14 * SWS / CMIC Node / System VMS SWS / CMIC Node / System VMS * SWS / CMIC Node / System VMS * SWS / CMIC Node / System VMS KVM * SWS / CMIC Node / System VMS * SWS / CMIC Node / System VMS * SWS / CMIC Node / System VMS * SWS / CMIC Node / System VMS # managed chassis # unmanaged chassis AC Box AC Box Cabinet_0228 Product and Site Preparation Guide 23

24 Chapter 1 Product Information Multiple-Purpose Cabinet Descriptions Multiple-Purpose Cabinet Descriptions Cabinet Conventions for Multiple-Purpose Cabinets The Teradata Managed Server cabinet can be configured as a multiple-purpose cabinet that includes any combination of BAR configurations, TMS applications (Viewpoint, SAS, TMSM, Data Mover, Load Server, Unity), channel servers and/or ECS servers, and Service Workstation(s) (for servicing and maintenance of a Teradata system). The placement of the hardware components in a multiple-purpose cabinet follows these general cabinet build conventions: Each chassis has a standard position in the cabinet, and is numbered from the bottom up. Chassis that are managed over the server management network have assigned chassis ID numbers. The chassis ID number identifies the chassis by position/type in the server management interface. Unmanaged chassis are numbered by position for cabling purposes only. The numbers do not appear in the management interface as identification of the chassis. Ethernet switches are loaded and accessible only from the rear of the cabinet. All other chassis are loaded from the front of the cabinet, and accessible from both front and rear. The general build sequence is as follows: 1. If there is a KVM (maximum of 1), install in U If there is a System VMS, install in U If there are BYA32S switches, install in U25 and U If there is a BAR admin switch (maximum of 1), install in U4. 5. Install servers in the following order in the following pre-defined locations: a. a BAR admin server (maximum of 1): U5-6. b. BAR data servers (maximum of 6): U5-6, U9-10, U13-14, U17-18, U21-22, U25-26, and U c. SWSs and System VMSs (maximum of 3 in any combination): SWSs: U5-6, U9-10, U13-14, U17-18, U21-22, U25-26, U29-30, and U System VMSs: U5, U9, U13, U17, U21, U25, U29, U31. d. TMSs (maximum of 8): U5-6, U9-10, U13-14, U17-18, U21-22, U25-26, U29-30, and U e. Channel servers (maximum of 8): U5-6, U9-10, U13-14, U17-18, U21-22, U25-26, U29-30, and U f. ECS servers (maximum of 6): U5-6, U9-10, U13-14, U17-18, U21-22, U25-26, U29-30, and U Note: If an ECS is installed in the cabinet, a CMIC, SWS, and KVM must also be installed. This reduces the number of available server slots from 8 to 6. g. CMIC or Cabinet VMS (maximum of 1; both types cannot be installed in cabinet): CMIC: U5-6, U9-10, U13-14, U17-18, U21-22, U25-26, U29-30, and U Cabinet VMS: U5, U9, U13, U17, U21, U25, U29, and U Product and Site Preparation Guide

25 Chapter 1 Product Information Multiple-Purpose Cabinet Descriptions 6. If there are BAR data servers, install the associated BAR data switches in the following order in the following pre-defined locations: a. 10 Gb BAR data switches (maximum of 3): U8, U12, U16. b. 1 Gb BAR data switches (maximum of 6): U8, U12, U16, U20, U24 and U28. c. Fibre Channel switch (maximum of 1): U37. Product and Site Preparation Guide 25

26 Chapter 1 Product Information Multiple-Purpose Cabinet Descriptions Multiple-Purpose Cabinet Configurations Figure 6: Teradata Managed Server Cabinet Configuration - Multiple-Purpose Servers and switches can be installed in the locations shown, in any combination, as long as the stated maximums are not exceeded: * Only 1 KVM switch can be installed. If installed, a 1 Gb BAR data switch cannot be installed in U space Primary Server Mgmt Switch Secondary Server Mgmt Switch cabling Brocade 5100 FC Switch * BYA32Ss are installed in U spaces 25 and 29. If BYA32Ss are installed, servers cannot be installed in U spaces 25-26, * TMS / SWS / VMS / Channel / ECS / CMIC * Only 1 CMIC or Cabinet VMS can be installed. 14 * BAR Data / TMS / SWS / VMS / Channel / ECS / CMIC / BYA32S Maximum of 3 SWSs or System VMSs, in any combination: * 1 SWS or System VMS is attached to the KVM * 1 Gb BAR Data Switch cabling BAR Data / TMS / SWS / VMS / Channel / ECS / CMIC / BYA32S * Additional SWSs and/or System VMSs are accessed through the SWS or System VMS attached to the KVM. * System or Cabinet VMSs are installed in the lowest-numbered U space of a slot. For example, U space 21. * Up to 6 ECSs can be installed. If BAR is included: * The BAR data server-to-switch ratio (the data building block) depends on the BAR configuration. Data building blocks consist of 1-4 BAR data servers with 1-2 associated data switches (1 Gb and/or 10 Gb). * The KVM is an unmanaged chassis * 9 * 8 * 7 6 * 5 4 * 1 Gb BAR Data Switch cabling BAR Data / TMS / SWS / VMS / Channel / ECS / CMIC KVM or 1 Gb BAR Data Switch cabling BAR Data / TMS / SWS / VMS / Channel / ECS / CMIC 1 Gb or 10 Gb BAR Data Switch cabling BAR Data / TMS / SWS / VMS / Channel / ECS / CMIC 1 Gb or 10 Gb BAR Data Switch cabling BAR Data / TMS / SWS / VMS / Channel / ECS / CMIC * The SWSs can be managed or unmanaged chassis. 3 2 * 1 Gb or 10 Gb BAR Data Switch cabling BAR Admin / BAR Data / TMS / VMS / SWS / Channel / ECS / CMIC # managed chassis # unmanaged chassis 1 1 Gb BAR Admin Switch AC Box cabling AC Box Cabinet_ Product and Site Preparation Guide

27 Chapter 1 Product Information Teradata Managed Server Feature Summaries Teradata Managed Server Feature Summaries Base Models 405, 407, 607 The following table outlines the features of the Teradata Managed Server 405, 407, and 607 base models. Other Teradata Managed Server configurations are based on these models. Model Feature Feature Description TMS Models 405L, 405W (Base 1) TMS Models 407L, 407W (Base 2) TMS Models 607L, 607W (Base 3) Processor Memory Disk drives Adapters Operating system Processor Memory Disk drives Adapters Operating system Processor Memory Disk drives Adapters Operating system One 2.4Ghz quad core Intel Xeon E5530 CPU, 8MB cache 12GB (three 4GB 1333 MHz DIMMs, DDR3) Two 3.5-inch 450GB SAS 15K RPM hard drives None 405L - SUSE Linux Enterprise Server 10 SP1, SP3 405W - Windows Server 2003 x64 One 2.4Ghz quad core Intel Xeon E5620 CPU, 12MB cache 12GB (three 4GB 1333 MHz DIMMs, DDR3) Two 3.5-inch 450GB SAS 15K RPM hard drives None 407L - SUSE Linux Enterprise Server 10 SP3 407W - Windows Server 2003 x64 Two 2.66Ghz six core Intel Xeon X5650 CPUs, 12MB cache 48GB (six 8GB 1333 MHz DIMMs, DDR3) Two 3.5-inch 450GB SAS 15K RPM hard drives None 607L - SUSE Linux Enterprise Server 10 SP3 607W - Windows Server 2003 x64 Viewpoint Models 415, 617 The following table outlines the features of the Teradata Managed Server 415 and 617 Viewpoint models. Model Feature Feature Description TMS Models 415, 415F (Viewpoint) Processor Two 2.4Ghz quad core Intel Xeon E5530 CPUs, 8MB cache Memory 24GB (six 4GB 1333 MHz DIMMs, DDR3) Disk drives Six 3.5-inch 450GB SAS 15K RPM hard drives Adapters Viewpoint model 415: Product and Site Preparation Guide 27

28 Chapter 1 Product Information Teradata Managed Server Feature Summaries Model Feature Feature Description Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) Viewpoint model 415F (optical): Intel PRO/1000 PF dual Gb Ethernet PCIe fiber adapter (full height, slot 1) Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) TMS Models 617, 617F, F (Viewpoint) Operating system Processor Memory Disk drives SUSE Linux Enterprise Server 10 SP1, SP3 Two 2.66Ghz six core Intel Xeon X5650 CPUs, 12MB cache 48GB (six 8GB 1333 MHz DIMMs, DDR3) Six 3.5-inch 450GB SAS 15K RPM hard drives Adapters Viewpoint model 617: Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) Viewpoint model 617F (optical): Intel PRO/1000 PF dual Gb Ethernet PCIe fiber adapter (full height, slot 1) Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) Viewpoint model F (optical): Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 1) Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) Operating system SUSE Linux Enterprise Server 10 SP3 SAS Models 425, 627 The following table outlines the features of the Teradata Managed Server 425 and 627 SAS models. Model Feature Feature Description TMS Model 425 (SAS) Processor Memory Disk drives Two 2.4 Ghz quad core Intel Xeon E5530 CPUs, 8M Cache 72GB (eighteen 4GB 1333MHz DIMMs, DDR3) Six 3.5-inch 450GB SAS 15K RPM hard drives Adapters Intel PRO 1000PT quad Gb Ethernet PCIe copper adapter (full height, slot 1) 28 Product and Site Preparation Guide

29 Chapter 1 Product Information Teradata Managed Server Feature Summaries Model Feature Feature Description Intel PRO 1000PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) TMS Models 627, F, 627-S, FS (SAS) Operating system Processor Memory Disk drives Adapters SAS model 627: SUSE Linux Enterprise Server 10 SP1, SP3 Two 2.66Ghz six core Intel Xeon X5650 CPUs, 12MB cache 96GB (twelve 8GB 1333MHz DIMMs, DDR3) Six 3.5-inch 450GB SAS 15K RPM hard drives Intel PRO 1000PT quad Gb Ethernet PCIe copper adapter (full height, slot 1) Intel PRO 1000PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) SAS model F (optical): Intel PRO 1000PT quad Gb Ethernet PCIe copper adapter (full height, slot 1) Intel PRO 1000PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 3) Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 4) SAS model 627-S (SAS): Intel PRO 1000PT quad Gb Ethernet PCIe copper adapter (full height, slot 1) Intel PRO 1000PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) LSI E quad 6Gbx4 SAS PCIe adapter (full height, slot 3) LSI E quad 6Gbx4 SAS PCIe adapter (full height, slot 4) SAS model FS (optical, SAS): Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 1) Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 2) LSI E quad 6Gbx4 SAS PCIe adapter (full height, slot 3) LSI E quad 6Gbx4 SAS PCIe adapter (full height, slot 4) Operating system SUSE Linux Enterprise Server 10 SP3 Product and Site Preparation Guide 29

30 Chapter 1 Product Information Teradata Managed Server Feature Summaries Teradata Multi-System Manager (TMSM) Models 435, 637 The following table outlines the features of the Teradata Managed Server 435 and 637 TMSM models. Model Feature Feature Description TMS Model 435 (TMSM) TMS Models 637, C, F (TMSM) Processor Memory Disk drives Adapters Two 2.4 Ghz quad core Intel Xeon E5530 CPUs, 8M Cache 48GB (twelve 4GB 1333MHz DIMMs, DDR3) Six 3.5-inch 450GB SAS 15K RPM hard drives Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) Operating system SUSE Linux Enterprise Server 10 SP1, SP3 Processor Memory Disk drives Adapters TMSM model 637: Two 2.66Ghz six core Intel Xeon X5650 CPUs, 12MB cache 96GB (twelve 8GB 1333MHz DIMMs, DDR3) Six 3.5-inch 450GB SAS 15K RPM hard drives Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) TMSM model C: Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 3) Intel X520-DA2 dual 10 Gb Ethernet PCIe2 copper (full height, slot 4) TMSM model F (optical): Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 3) Operating system SUSE Linux Enterprise Server 10 SP3 Data Mover Models 445, 647 The following table outlines the features of the Teradata Managed Server 445 and 647 Data Mover models. Model Feature Feature Description TMS Model 445 (Data Mover) Processor Memory Disk drives Two 2.4 Ghz quad core Intel Xeon E5530 CPUs, 8M Cache 48GB (twelve 4GB 1333MHz DIMMs, DDR3) Six 3.5-inch 450GB SAS 15K RPM hard drives 30 Product and Site Preparation Guide

31 Chapter 1 Product Information Teradata Managed Server Feature Summaries Model Feature Feature Description Adapters Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 1) Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) Operating system SUSE Linux Enterprise Server 10 SP1, SP3 TMS Model 647, C, F (Data Mover) Processor Memory Disk drives Two 2.66Ghz six core Intel Xeon X5650 CPUs, 12MB cache 96GB (twelve 8GB 1333MHz DIMMs, DDR3) Six 3.5-inch 450GB SAS 15K RPM hard drives Adapters Data Mover model 647: Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 1) Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) Data Mover model C: Intel X520-DA2 dual 10 Gb Ethernet PCIe2 copper (full height, slot 2) Intel X520-DA2 dual 10 Gb Ethernet PCIe2 copper (full height, slot 3) Intel X520-DA2 dual 10 Gb Ethernet PCIe2 copper (full height, slot 4) Data Mover model F (optical): Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 2) Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 3) Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 4) Operating system SUSE Linux Enterprise Server 10 SP3 BAR Models 455, 457 The following table outlines the features of the Teradata Managed Server 455 and 457 BAR models. Model Feature Feature Description TMS Model 455A (BAR Admin) Processor Memory Disk drives One 2.4 Ghz quad core Intel Xeon E5530 CPU, 8M Cache 12GB (three 4GB 1333MHz DIMMs, DDR3) Two 3.5-inch 450GB SAS 15K RPM hard drives Product and Site Preparation Guide 31

32 Chapter 1 Product Information Teradata Managed Server Feature Summaries Model Feature Feature Description Adapters BAR admin model 455A: Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) QLogic QLE2462 dual 4Gb Fibre Channel PCIe adapter (full height, slot 4) TMS Model 455DF (BAR Data FC) TMS Models 455-DF-10C, 455-DF-10F (BAR Data) Operating system Processor Memory Disk drives Adapters Operating system Processor Memory Disk drives Adapters SUSE Linux Enterprise Server 10 SP1, SP3 One 2.4 Ghz quad core Intel Xeon E5530 CPU, 8M Cache 12GB (three 4GB 1333MHz DIMMs, DDR3) Two 3.5-inch 450GB SAS 15K RPM hard drives BAR data FC model 455DF: Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 1) Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 3) QLogic QLE2464 quad 4 Gb Fibre Channel PCIe adapter (full height, slot 4) SUSE Linux Enterprise Server 10 SP1, SP3 Two 2.4 Ghz quad core Intel Xeon E5530 CPUs, 8M Cache 24GB (six 4GB 1333MHz DIMMs, DDR3) Two 3.5-inch 450GB SAS 15K RPM hard drives BAR data model 455DF-10C: Intel X520-DA2 dual 10 Gb Ethernet PCIe copper adapter (full height, slot 1) Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) Intel X520-DA2 dual 10 Gb Ethernet PCIe copper adapter (full height, slot 3) QLogic QLE2464 quad 4 Gb Fibre Channel PCIe adapter (full height, slot 4) Model 455DF-10F BAR data server: Intel X520-SR2 quad 10 Gb Ethernet PCIe fiber adapter (full height, slot 1) Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) Intel X520-SR2 quad 10 Gb Ethernet PCIe copper adapter (full height, slot 3) QLogic QLE2464 quad 4 Gb Fibre Channel PCIe adapter (full height, slot 4) 32 Product and Site Preparation Guide

33 Chapter 1 Product Information Teradata Managed Server Feature Summaries Model Feature Feature Description TMS Model 457A (BAR Admin) Operating system Processor Memory Disk drives SUSE Linux Enterprise Server 10 SP1, SP3 One 2.4 Ghz quad core Intel Xeon E5620 CPU, 12MB Cache 12GB (three 4GB 1333MHz DIMMs, DDR3) Two 3.5-inch 450GB SAS 15K RPM hard drives Adapters BAR admin model 457A: Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) QLogic QLE2564 quad 8Gb Fibre Channel PCIe adapter (full height, slot 4) TMS Model 457DF (BAR Data FC) TMS Model 457DF-10C, 457DF-10F (BAR Data FC) Operating system Processor Memory Disk drives Adapters Operating system Processor Memory Disk drives Adapters SUSE Linux Enterprise Server 10 SP3 One 2.4 Ghz quad core Intel Xeon E5620 CPU, 12MB Cache 12GB (three 4GB 1333MHz DIMMs, DDR3) Two 3.5-inch 450GB SAS 15K RPM hard drives BAR data FC model 457DF: Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) QLogic QLE2564 quad 8Gb Fibre Channel PCIe adapter (full height, slot 4) SUSE Linux Enterprise Server 10 SP3 Two 2.4 Ghz quad core Intel Xeon E5620 CPUs, 12MB Cache 24GB (six 4GB 1333MHz DIMMs, DDR3) Two 3.5-inch 450GB SAS 15K RPM hard drives BAR data FC model 457DF-10C: Intel X520-DA2 dual 10 Gb Ethernet PCIe2 copper adapter (full height, slot 1) Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) Intel X520-DA2 dual 10 Gb Ethernet PCIe2 copper adapter (full height, slot 3) QLogic QLE2564 quad 8Gb Fibre Channel PCIe adapter (full height, slot 4) BAR data FC model 457DF-10F: Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 1) Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 3) Product and Site Preparation Guide 33

34 Chapter 1 Product Information Teradata Managed Server Feature Summaries Model Feature Feature Description QLogic QLE2564 quad 8Gb Fibre Channel PCIe adapter (full height, slot 4) TMS Models 457D-10C, 457D-10F (BAR Data) Operating system Processor Memory Disk drives Adapters Operating system SUSE Linux Enterprise Server 10 SP3 Two 2.4 Ghz quad core Intel Xeon E5620 CPUs, 12MB Cache 24GB (six 4GB 1333MHz DIMMs, DDR3) Two 3.5-inch 450GB SAS 15K RPM hard drives BAR data model 457D-10C: Intel X520-DA2 dual 10 Gb Ethernet PCIe2 copper adapter (full height, slot 1) Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) Intel X520-DA2 dual 10 Gb Ethernet PCIe2 copper adapter (full height, slot 3) Intel X520-DA2 dual 10 Gb Ethernet PCIe2 copper adapter (full height, slot 4) BAR data model 457D-10F: Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 1) Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 3) Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 4) SUSE Linux Enterprise Server 10 SP3 Load Server Models 465, 667 The following table outlines the features of the Teradata Managed Server 465 and 667 Load Server models. Model Feature Feature Description TMS Model 465 (Load Server) Processor Memory Disk drives Two 2.4 Ghz quad core Intel Xeon E5530 CPUs, 8M Cache 72GB (eighteen 4GB 1333MHz DIMMs, DDR3) Six 3.5-inch 450GB SAS 15K RPM hard drives Adapters Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 1) Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) 34 Product and Site Preparation Guide

35 Chapter 1 Product Information Teradata Managed Server Feature Summaries Model Feature Feature Description TMS Models 667, F, FS (Load Server) Operating system Processor Memory Disk drives SUSE Linux Enterprise Server 10 SP1, SP3 Two 2.66Ghz six core Intel Xeon X5650 CPUs, 12MB cache 96GB (twelve 8GB 1333MHz DIMMs, DDR3) Six 3.5-inch 450GB SAS 15K RPM hard drives Adapters Load Server model 667: Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 1) Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) Load Server model F: Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 1) Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 3) Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 4) Load Server model FS: Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 1) Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 2) LSI E quad 6Gbx4 SAS PCIe adapter (full height, slot 3) LSI E quad 6Gbx4 SAS PCIe adapter (full height, slot 4) Operating system SUSE Linux Enterprise Server 10 SP3 Unity Model 687 The following table outlines the features of the Teradata Managed Server 687 Unity models. Model Feature Feature Description TMS Model 687, C, F (Unity) Processor Two 2.66Ghz six core Intel Xeon X5650 CPUs, 12MB cache Memory 96GB (twelve 8GB 1333MHz DIMMs, DDR3) Disk drives Six 3.5-inch 450GB SAS 15K RPM hard drives Optical drive DVD RW SATA drive Adapters Unity model 687: Product and Site Preparation Guide 35

36 Chapter 1 Product Information Teradata Managed Server Feature Summaries Model Feature Feature Description Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 1) Intel PRO/1000 PT quad Gb Ethernet PCIe copper adapter (full height, slot 2) Unity model C: Intel X520-DA2 dual 10 Gb Ethernet PCIe2 copper (full height, slot 2) Intel X520-DA2 dual 10 Gb Ethernet PCIe2 copper (full height, slot 3) Intel X520-DA2 dual 10 Gb Ethernet PCIe2 copper (full height, slot 4) Unity model F (optical): Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 2) Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 3) Intel X520-SR2 dual 10 Gb Ethernet PCIe2 fiber adapter (full height, slot 4) Operating system SUSE Linux Enterprise Server 10 SP3 SWS Models 45, 47 The following table outlines the features of the SWS 45 and 47 models. Model Feature Feature Description SWS Model 45 SWS Model 47 Processor One 2.4 Ghz quad core Intel Xeon E5530 CPU, 8M Cache Memory 12GB (three 4GB 1333MHz DIMMs, DDR3) Disk drives Two 3.5-inch 450GB SAS 15K RPM hard drives Adapters --- Operating system SUSE Linux Enterprise Server 10 SP1 Processor One 2.4Ghz quad core Intel Xeon E5620 CPU, 12MB cache Memory 12GB (three 4GB 1333MHz DIMMs, DDR3) Disk drives Two 3.5-inch 450GB SAS 15K RPM hard drives Adapters --- Operating system SUSE Linux Enterprise Server 10 SP3 36 Product and Site Preparation Guide

37 Chapter 1 Product Information Server Management Network Topology Server Management Network Topology Figure 7: Teradata Managed Server Cabinet - Server Management Network Topology Primary Server Mgmt Switch Secondary Server Mgmt Switch cabling Brocade 5100 FC Switch * TMS / SWS / VMS / Channel / ECS / CMIC *The SWSs can be managed or unmanaged. If unmanaged,swss are not connected to the server management network. * * BAR Data / TMS / SWS / VMS / Channel / ECS / CMIC / BYA32S 1 Gb BAR Data Switch cabling BAR Data / TMS / SWS / VMS / Channel / ECS / CMIC / BYA32S *** *** ** The KVM is unmanaged. It is not connected to the server management network. * 1 Gb BAR Data Switch cabling BAR Data / TMS / SWS / VMS / Channel / ECS / CMIC ** KVM or 1 Gb BAR Data Switch cabling * BAR Data / TMS / SWS / VMS / Channel / ECS / CMIC 1 Gb or 10 Gb BAR Data Switch cabling *** BYA32S chassis are connected to the primary server management switch. BYA32S chassis do not have a connection to the secondary server management switch. * * BAR Data / TMS / SWS / VMS / Channel / ECS / CMIC 1 Gb or 10 Gb BAR Data Switch cabling BAR Data / TMS / SWS / VMS / Channel / ECS / CMIC 1 Gb or 10 Gb BAR Data Switch cabling * BAR Admin / BAR Data / TMS / VMS / SWS / Channel / ECS / CMIC 1 Gb BAR Admin Switch AC Box AC Box Cabinet_0288 The server management network enables overall system monitoring and control. Product and Site Preparation Guide 37

38 Chapter 1 Product Information Product Statements The server management network uses two 24-port Ethernet switches for the primary and secondary server management network connections. Each cabinet contains a primary and secondary Ethernet switch. Each managed chassis connects to the primary and secondary Ethernet switch in the cabinet. Each primary and secondary Ethernet switch in the cabinet connects to the server management network of the system. Note: For a more detailed description of the server management network as it pertains to the full system, see the appropriate Product and Site Preparation Guide. A fully-configured, multiple-purpose Teradata Managed Server cabinet is shown in the figure. Single-purpose cabinets and cabinets with fewer components retain the same cabling protocol. For port-to-port cabling, see the appropriate Hardware Installation Guide. Product Statements Regulatory Compliance Teradata platform cabinets comply with the following regulatory standards: Country/Region Emissions/Immunity Certification USA FCC CFR 47 - Part 15 (CISPR 22) European Union EMC Directive 2004/108/EC EN EN EN EN EN EN EN EN EN EN EN EN EN EN55022 EN Product and Site Preparation Guide

39 Chapter 1 Product Information Product Statements Country/Region Emissions/Immunity Certification CISPR 22 CISPR 24 Japan VCCI V-3/ (CISPR 22) Australia/New Zealand AS/NZS CISPR 22:2006 Product Safety ctuvus approval to UL /CAN/CSA 22.2 No CB Report to IEC with all national deviations Product and Site Preparation Guide 39

40 Chapter 1 Product Information Product Statements Declaration of Conformity 9211 The Teradata Managed Server Cabinet complies with the following standards for Electromagnetic Interference (EMI) and Susceptibility: 40 Product and Site Preparation Guide