Understanding ACD and SMDR

Size: px
Start display at page:

Download "Understanding ACD and SMDR"

Transcription

1 Understanding ACD and SMDR If your contact center uses Customer Interaction Solutions and the Mitel SX-2000 or 3300 ICP, all data used in reports and real-time monitors are generated from two PBX data streams. The two streams are referred to as the Station Message Detail Recording (SMDR) stream and the Automatic Call Distributor (ACD) Real-time events stream. Each stream connects the Contact Center Management Enterprise Server to the PBX using a serial com port or a TCP/IP network connection. Each stream is generated independently and has its own set of control attributes within the PBX. The only similarity between the two streams is the Answered ACD Queue Calls record, which is generated for both the SMDR and ACD streams when an ACD call is answered, depending on PBX programming. SMDR StreamThe SX-2000 and 3300 ICP have two classes of SMDR records: External SMDR (generated when a PBX trunk is involved in the call) and Internal SMDR (generated when there are no trunks involved in the call). Each sub-stream is governed by separate configuration options programmed on the PBX and must be enabled to send data to the Enterprise Server. External SMDR recordsthe following is an example of an External SMDR record: 01/14 09:24 00:00:59 T P T 1405 Where, 01/14 is the date the caller contacted your contact center09:24 is the time the call originated 00:00:59 is the amount of time the agent spoke with the caller before transferring the callt201 is the number of the trunk that the caller dialed in to003 is the time to answer for the agent (not the time spent in queue)p001 is the reporting number of the ACD path queue the call was queued to 100 is the reporting number of the agent group1011 is the ID of the agent who first answered the callt is the transferred call identifier1405 is the ID of the agent whom the call was transferred tothis means that an outside caller dialed in to the contact center on Trunk 201, on January 14th at 9:24 AM. The call was queued to the ACD Path Queue 1 (shown as P001), queuedto Agent Group 100, and answered by Agent 1011 after 3 seconds waiting in queue. The agent who answered the call talked to the customer for 59 seconds before transferring the call to Agent Internal SMDR recordsthe following is an example of an Internal SMDR record: 01/14 07:20 00:00: I 7015 Where, 1/14 is the date the call was made07:20 is the time the call originated00:00:10 is the length of the call6979 is the extension that the call was made from002 is the time to answer for the agent (not the time spent in queue)6515 is the dialable number of the ACD queue the call was made toi is the internal call identifier7015 is the ID of the agent who answered the callthis means that on January 14th at 7:20 AM, internal Extension 6979 dialed the ACDQueue P001 with dialable number The call was answered by Agent 7015 after 2 seconds of wait time. The two parties talked for 10 seconds. There was no external caller

2 involved in this call. An External SMDR record is generated by the PBX when 1. A call is completed (i.e. when all parties involved in the call have hung up). This can be either an answered or abandoned call. 2. A call is transferred 3. An Account Code is entered 4. A call is interflowed from the ACD queue to a new destination 5. A call is requeued back to the ACD queue by an agent who did not answer the call 6. A call is Queue Unavailable and routed to another answering point An Internal SMDR record is generated by the PBX when 1. A call is completed (i.e. when all parties involved in the call have hung up) between two devices on the PBX (extensions or agents), with no outside parties (trunks) involved in the call 2. The call is an internal answered call only 3. Calls to ACD queues report based on the dialable number of the queue, not the reporting number as found in the External SMDR records. 4. All parties in the call have their Class of Services set to enable SMDR Internal recording 5. The PBX has the Internal SMDR option enabled. An SMDR record will only be sent to the Contact Center Management Enterprise Server in the previously mentioned conditions, when 1. All parties involved in each call segment have their PBX Class of Service set to record SMDR calls (incoming and outgoing) 2. The SMDR Options on the PBX have been set to record incoming, outgoing, and internal calls 3. The SMDR Options have been set to generate new SMDR records for each transferred segment of a call Common problems in SMDR stream configuration1. Class of Service forms in the PBX(s) have not been enabled with SMDR recording. Calls that involve these devices will not send SMDR records to the Contact Center Management Enterprise Server. 2. Agent IDs and extension are programmed to be longer than 4 digits (for example, Agent ID 50567) but the Extended digit length option is not enabled on the SMDR Options Assignment form. This will truncate the SMDR record to 4 digits which will cause real-time and reporting errors. 3. The contact center is receiving calls from internal sources (other extensions in the PBX) but does not have the Internal SMDR option enabled in the SMDR Options form of the PBX and/or does not have the Class of Service form Record Internal SMDR option enabled. ACD Real-time events streamthe ACD Real-time events data stream provides event based

3 information on what ACD extensions (as defined in the PBX) are doing and provides a summary of the Queue Realtime statistics every 15 seconds. ACD Real-time events stream queue statisticsif the path or agent group has the Real-time events option enabled on the PBX, the PBX will generate a summary of the path queue and agent group queue stats (for example, calls waiting in queue, longest waiting caller, and available agents) every 15 seconds, however Contact Center Management makes use of the Path Queue event only. NOTE: This event can be delayed by up to 15 seconds. When you are looking at thequeue Now monitor in Contact Center Client, note that the On ACD column is directly mapped to this event and signifies the number of agents logged on and available. This statistic is updated every 15 seconds. The Agent by Position and Agents by Time statistics are updated when an agent changes state, so the statistics in these monitors are considered accurate to the second, and could appear to be out of sync with the Queue Now column until the next event update. The Agent events sub-stream of the ACD Real-time events stream generates a record when an ACD extension (regardless of whether an agent is logged in to an extension), changes their state, causing a monitor to display the changed state of the agent. ACD Real-time events are generated when 1. An agent logs in/out of an extension 2. An agent sets/removes a Make Busy reason code 3. An agent sets/removes DND 4. An agent answers a call from an ACD path queue 5. An agent enters/leaves the Work Timer state at the end of an ACD path queue call 6. An agent answers an incoming call that did not come from an ACD queue 7. An agent makes an internal/external outbound call (the event is not generated until the call is answered) 8. An agent puts any of these calls on hard hold (red button hold) 9. A call on hard hold is answered or abandoned 10. An agent completes a call and becomes idle The ACD Real-time event stream allows Contact Center Management to map the agent state (for example, Idle, On ACD, Outgoing, Incoming, Unavailable, and Logged in). The ACD Real-time event stream and the SMDR stream have certain records generated by the same action (for example, agent answering an ACD call, agent on an outbound call, agent answering an incoming call). ACD Real-time events can be generated when there is no accompanying SMDR record, for example, when logging in/out or setting Make Busy Reason Codes. The ACD Real-time event stream is not controlled by any PBX options, with the exception of the This Extension can have an ACD Agent option. SMDR records can be generated when there is no accompanying ACD Real-time event,

4 for example, agents entering Account Codes, agents transferring calls to other answering points, calls Interflowing, calls Overflowing, calls abandoning, etc. ACD Real-time events can also be generated when there is no accompanying SMDR record, if 1. The call is internal and the SMDR option for Internal SMDR is not enabled 2. The call is transferred and the SMDR option Report All Transfers is not enabled 3. The call involves one or more parties that do not have the Class of Service option in the PBX set to record SMDR records. How data streams are usedthe SMDR stream provides the data for almost all of the Contact Center Management reports, with the exception of Agent and Agent Group Event by Period reports. The SMDR data stream provides statistics for historical reports and real-time monitors. It provides statistics for the following devices 1. Trunks All data 2. Queues All data, with the exception of Current Calls Waiting, Longest Waiting Caller, and Agents On (which come from the ACD Real-time events stream) 3. Account Codes All data 4. DNIS All data 5. ANI All data 6. Extensions All data 7. Agents/Employees All historical reports, with the exception of Agent/Employee by Period reports (which come from the ACD Real-time events stream). All agent monitors come from the ACD Real-time event stream. Understanding the time element SMDR data is credited toall SMDR derived statistics are credited to the 15 minute interval that the call or call segment originated during. This method of crediting can be misleading if you do not understand that the calls are credited in this manner. For example, if an ACD queue call starts at 07:59 and continues for 65 minutes, this call will credit the ACD queue with 65 minutes of talk time in the interval 07:45 to 07:59. That is, in a 15 minute interval, a single call will account for 65 minutes of queue talk time. The reason for crediting calls in this manner is to support ErlangC traffic calculations. Therefore, there is no point in examining a call being spread over multiple 15 minute increments in a report when the call derives from the SMDR stream, as the data will not make sense. Understanding the time element ACD data is credited toagent event data is used to build Agent Event by Period reports. You can identify these reports easily as the top of the report shows the data derived from the ACD Real-time event stream (for example, Logout date/time, Total shift time, Idle time, ACD true talk time, etc). Agent information that is stored in the database is credited to the start time of the shift or the time that the agent logged in at. When you run a report for an Agent Event by Period report, the report will display all agent shifts for the day(s) you selected. An agent that

5 logs in at 07:59 and works an eight hour shift will have a single record generated in to the Contact Center Management database. The record that is generated will be credited to the day they logged in and will have a start time that falls within the 07:45 to 07:59 interval. The difference between calls and agent statethe SMDR-based reports and statistics are events that originate when a caller initiates a call. The call can be handled by multiple queues and agents within the contact center. An external call that arrives on a trunk can be offered to several queues and agents as the call is routed and transferred around the contact center. The trunk sees this as a single call but the call will be credited to every device it passed through. For example, a call arrives on Trunk 209, is queued to Path 001 (Customer Service), queued to Agent Group 100, and answered by Agent 5000, who talks for two minutes. The call is then transferred to Path 002 (Order Tracking), queued to Agent Group 101, and answered by Agent 6000 who completes the call. Contact Center Management will credit all parties and devices involved in the call, and will record the talk time of each party and device involved in the call. Therefore, if you were to blindly add all call pegs from all devices in the call, you would have counted 5 calls. It is important to understand how call routing is being handled by the PBX in order to properly interpret report statistics. The reports which are based on agent state statistics are meant to detail what an agent accomplished during their shift. The main statistic being presented is theses reports is the amount of time an agent is in different states when they could have been answering calls. These statistics provide managers with answers to their most important questions, for instance, how long an agent was logged in to a queue and what agent states the agent was set to during this time (for example, ACD talk time, Make Busy, DND, Work Timer, Idle, Inbound personal, Outgoing call, Holding calls, etc.). Agent reports from the SMDR stream, such as Agent Performance reports, report on agent calls from the SMDR stream and are credited to the same interval logic as queue statistics. These two different reports on agent productivity are fundamentally different. Agent information from the SMDR stream can have multiple calls credited to an agent ID, as an agent with multiple extensions can handle multiple calls at once. Agent information from the ACD Real-time event stream displays the state of an agent and will only allow an agent to be in one state at a time. SMDR call information for an agent is related to the soft or hard set telephone, whereas ACD Real-time event information is related to what the agent is doing. If an agent is handling multiple calls at once, Contact Center Management will credit the Agent Event by Period statistic to the time of the active call, so that an agent can never be set to a state for longer than they were logged in. Troubleshooting frequently encountered problems1. Your contact center has agents and queues that are servicing internal callers, for example, an IT department or help desk. When you compare Agent Performance reports to Agent Event by Period reports for the same agents and period, the ACD

6 talk times for the Agent Event by Period report are significantly greater. The most likely cause of this problem is that you do not have Internal SMDR enabled on the PBX and/or the Class of Service for the agent or the callers do not have Internal SMDR enabled. 2. Your contact center has a queue that services internal callers, but you do not see any abandoned calls or interflowed calls for the specified queue. You have confirmed that Internal SMDR options are enabled. The most likely cause for this problem is that the Internal SMDR stream only generates SMDR records when a call is answered, and no records are generated for calls that are abandoned, interflowed, or transferred. 3. The number of Account Code entries credited to an agent does not equal what the agent says they entered. The most likely causes of this problem are that the SMDR options are not enabled for Account Codes or agents are not entering Account Codes while talking to customers. Account Codes will only be tagged if entered while a call is active. 4. An Agent by Period report shows all 0 s for an agent ID but the Agent Event by Period report for the same agent ID shows a full set of data. The most likely cause of this problem is the agent ID s are longer than 4 digits, but the SMDR option for Extended digit length is not enabled. As a result, the SMDR record has the agent ID truncated to 4 digits and Contact Center Management cannot match the SMDR record to the agent ID. 5. The number of calls to a path does not equal the number of calls answered by the corresponding agent group. The most likely cause of this problem is that agents are transferring or conferencing ACD calls. In this situation, SMDR will generate one peg to the queue but multiple pegs to the agents (one for the agent transferring the call and one for the agent who received the call). Last Modified By: ademski, Tuesday, July 20, Saturday, February 12, 2011

Glossary TASKE Call Center Management Tools Version 7.0. A caller terminates the call before an agent can answer.

Glossary TASKE Call Center Management Tools Version 7.0. A caller terminates the call before an agent can answer. Glossary of Terms Term Abandoned Call ABSBH Account Code ACD ACD Call ACD Call Center ACD Queue ACD Record ACD Search Agent Agent Group Agent Identifier Agent Report Definition A caller terminates the

More information

Basic ACD Planning. Agent Skill Group Planner ACD. Overflow Time

Basic ACD Planning. Agent Skill Group Planner ACD. Overflow Time Basic ACD Planning Agent Skill Group Planner The Agent Skill Group Planner assists in planning the distribution of workload between agent skill groups. Using the information collected from customer requirements

More information

UNITY CALL CENTER REPORTING. Version 1.0

UNITY CALL CENTER REPORTING. Version 1.0 UNITY CALL CENTER REPORTING Version 1.0 Contents Introduction... 3 Accessing the Reports... 3 Abandoned Call Report... 4 Settings:... 4 Report:... 5 Agent Activity Detail Report... 6 Settings:... 6 Report:...

More information

Enterprise Automatic Call Distribution

Enterprise Automatic Call Distribution DATA SHEET MITEL Enterprise Automatic Call Distribution Powerful and Scalable Virtual ACD Solution Ensuring the Business Continuity Enterprises Expect The Mitel Automatic Call Distribution platform offers

More information

ACD Terms and Definitions

ACD Terms and Definitions ACD Terms and Definitions There are four different types of information on the telephone activity of your call center: Agent data, Queue data, CDN data and Trunk data. A data item (such as Accepted Calls)

More information

Arc Enterprise. Supervisor Text Reports. Version 5.1.x

Arc Enterprise. Supervisor Text Reports. Version 5.1.x Arc Enterprise Supervisor Text Reports Version 5.1.x 2003-2011 Arc Solutions (International) Ltd. All rights reserved No part of this documentation may be reproduced in any form or by any means or used

More information

GNAV Pro User Guide TABLE OF CONTENTS

GNAV Pro User Guide TABLE OF CONTENTS GNAV PRO USER S GUIDE For support or suggestions for this guide: University IT 585-275-2000 UnivITHelp@rochester.edu Revised September 2015 TABLE OF CONTENTS About this Guide... 1 Support... 1 Logging

More information

Questions to ask clients prior to setting up a call center

Questions to ask clients prior to setting up a call center Questions to ask clients prior to setting up a call center Is this an inbound or outbound call center? How many total agents do you have? Are there multiple shifts? If so, how many agents per shift? How

More information

The following reference lineup was used in our verification testing for Version 6.0.1.0:

The following reference lineup was used in our verification testing for Version 6.0.1.0: Article ID: 51647 Last Review: September 13th, 2012 Release notes for 6.0.1 This is the list of all items for 6.0.1, released on Friday, September 14th, 2012. For more information, you can visit Mitel

More information

Supervisors. Quick Reference Guide

Supervisors. Quick Reference Guide Avaya Aura Contact Center 6 Supervisors Quick Reference Guide AACC6 1.0.2 4.2012 Avaya Aura Contact Center 6 Supervisors Quick Reference Guide Overview The Avaya Aura Contact Center 6 Administration tool

More information

ACD Manual. Version 3.1 for SV8100 R8

ACD Manual. Version 3.1 for SV8100 R8 ACD Manual Version 3.1 for SV8100 R8 September 2012 Contents What is ACD?... 4 Setting up ACD for the First Time... 5 Using PC Pro Wizards... 5 Determining When Calls can be delivered to ACD Groups...

More information

Technical Configuration Notes

Technical Configuration Notes MITEL SIP CoE Technical Configuration Notes Configure MCD for use with OpenIP SIP Trunking service SIP CoE 11-4940-00186 NOTICE The information contained in this document is believed to be accurate in

More information

MiCloud Contact Center

MiCloud Contact Center MiCloud Contact Center Integrated Tools for Managing and Reporting Contact Center Performance MiCloud Contact Center provides companies the sophisticated yet easy-to-use tools they need to manage, measure

More information

Hosted Voice Product Training Automatic Call Distributor (ACD)

Hosted Voice Product Training Automatic Call Distributor (ACD) Hosted Voice Product Training Automatic Call Distributor (ACD) 1 Agenda 1. Customer Resource Center 2. Logging In 3. Main Screen 4. Search Calls 5. Download Reports 6. Queues 8. Monitor 9. Whisper 10.

More information

Customer Interaction Solutions

Customer Interaction Solutions FEATURE MATRIX MITEL Customer Interaction Solutions A Highly Flexible, Two-tiered Offering Mitel Customer Interaction Solutions consists of Mitel Contact Center Enterprise Edition and Mitel Contact Center

More information

Hosted VoIP Phone System. Admin Portal User Guide for. Call Center Administration

Hosted VoIP Phone System. Admin Portal User Guide for. Call Center Administration Hosted VoIP Phone System Admin Portal User Guide for Call Center Administration Contents 1 About this Guide... 4 2 Accessing the Hosted VoIP Phone System Administration Portal... 5 3 Hosted VoIP Phone

More information

Contact Center Solutions A Highly Flexible, Two-Tiered Offering

Contact Center Solutions A Highly Flexible, Two-Tiered Offering feature matrix Mitel Solutions A Highly Flexible, Two-Tiered Offering Mitel Solutions consist of Mitel Enterprise Edition and Mitel. Whether you run a large, multi-site corporation or a high volume, dynamic

More information

Access Cloud Call Center Features

Access Cloud Call Center Features Access Cloud Call Center Features General Operational Features Queue Addressing/DNIS support - Assign full DN or Extension to queue - Assign multiple DNIS per Queue Assign Agents to queues - Assign to

More information

Contact Center Solutions

Contact Center Solutions 1256_7964-Contact Center Solutions_Layout 1 2/17/11 10:51 AM Page 1 FEATURE MATRIX MITEL Contact Center Solutions A Highly Flexible, Two-Tiered Offering Mitel Contact Center Solutions consist of Mitel

More information

Call Center Metrics: Glossary of Terms

Call Center Metrics: Glossary of Terms Call Center Metrics: Glossary of Terms A. abandoned call. A call or other type of contact that has been offered into a communications network or telephone system but is terminated by the person originating

More information

Automatic Call Distribution (ACD) AGENT USER GUIDE. 76-110-0430/E Release 5 Issue 1

Automatic Call Distribution (ACD) AGENT USER GUIDE. 76-110-0430/E Release 5 Issue 1 Automatic Call Distribution (ACD) AGENT USER GUIDE 76-110-0430/E Release 5 Issue 1 76-110-0430/E Release 5 Issue 1 Automatic Call Distribution (ACD) AGENT USER MANUAL Telrad Telecommunications Inc. Woodbury,

More information

Contact Center. Admin and Subscriber User Guide

Contact Center. Admin and Subscriber User Guide Contact Center Admin and Subscriber User Guide 11/12/2014 Table of Contents Configure Contact Center... 1 Queue Profile Setup... 1 Group Policies...1 Configure Basic Contact Center Settings... 6 Configure

More information

ACD Queues List Definitions. The ACD Queue list provides a summary about all available ACD Queues in a given VirtualPBX.

ACD Queues List Definitions. The ACD Queue list provides a summary about all available ACD Queues in a given VirtualPBX. ACD Queues Depending on how your VirtualPBX is used, callers might contact your company to obtain sales information, product support, status on a service requests, or similar tasks without knowledge of

More information

N-Focus Basic User Guide. March 2011 Version 4.1.2

N-Focus Basic User Guide. March 2011 Version 4.1.2 N-Focus Basic User Guide March 2011 Version 4.1.2 Table of Contents N-Focus Overview...4 Configuration...5 Overview...5 PBX Information...5 Connections...7 Connecting through a C-LAN card...7 Connecting

More information

Getting Started Guide

Getting Started Guide Getting Started Guide Version 4 January 9, 2004 1 Contents Installing 6110 Contact Center Management If you need help.......................................................... 1 Before installing Enterprise

More information

OVERVIEW TXCALLS FOR ACD

OVERVIEW TXCALLS FOR ACD OVERVIEW Good communication is a key asset for any business. At TX/communications Canada Inc., we know how important it is to have fast, efficient call processing. So whether the calls you receive are

More information

FEATURE MATRIX. Contact Center Business Edition is the right solution for contact centers that:

FEATURE MATRIX. Contact Center Business Edition is the right solution for contact centers that: FEATURE MATRIX Solutions A Highly Flexible, Two-Tiered Offering Mitel Solutions consist of Mitel Enterprise Edition and Mitel Contact Center Business Edition. Whether you run a large, multi-site corporation

More information

ShoreTel Enterprise Contact Center 8 Report Data Fields

ShoreTel Enterprise Contact Center 8 Report Data Fields ShoreTel Enterprise Contact Center 8 Report Data ields May, 2013 Legal Notices Document and Software Copyrights Copyright 1998-2013 by ShoreTel Inc., Sunnyvale, California, USA. All rights reserved. Printed

More information

Advanced Customer Education Presentation NEC SV9100 Contact Advanced Customer Education Document

Advanced Customer Education Presentation NEC SV9100 Contact Advanced Customer Education Document Advanced Customer Education Presentation NEC SV9100 Contact Advanced Customer Education Document In this course you will learn about the Contact Center features and applications. This document is designed

More information

MITEL MiCONTACT CENTER

MITEL MiCONTACT CENTER BROCHURE MITEL MiCONTACT CENTER A HIGHLY FLEXIBLE, TWO-TIERED OFFERING Mitel Mi Business consists of Mi Business Edition and Mi Enterprise Edition. Enterprise Edition is available in several different

More information

With 360 Cloud VoIP, your company will benefit from more advanced features:

With 360 Cloud VoIP, your company will benefit from more advanced features: Voice over IP (VoIP) has emerged as the new leader in cost-effective standards based communications. 360 Cloud VoIP enables customers have the benefits of an Enterprise PBX for a fraction of the cost of

More information

MITEL SIP CoE. Technical. Configuration Notes. Configure MCD 4.1 for use with SKYPE SIP Trunking. SIP CoE 10-4940-00120

MITEL SIP CoE. Technical. Configuration Notes. Configure MCD 4.1 for use with SKYPE SIP Trunking. SIP CoE 10-4940-00120 MITEL SIP CoE Technical Configuration Notes Configure MCD 4.1 for use with SKYPE SIP Trunking SIP CoE 10-4940-00120 NOTICE The information contained in this document is believed to be accurate in all respects

More information

Call centre definitions

Call centre definitions Call centre definitions Abandoned calls Cross selling Logged on time Speed of answer Absence CTI Lost calls Status ACD DDI LWT Talk time Adherence Erlang Message Unavailable AHT FRE Offered calls Utilisation

More information

TELSTRA IP TELEPHONY STANDARD CALL CENTRE

TELSTRA IP TELEPHONY STANDARD CALL CENTRE TELSTRA IP TELEPHONY STANDARD CALL CENTRE REPORTING GUIDE Copyright Telstra Corporation Limited (ABN 33 051 775 556) 2014. All rights reserved. No part of this publication may be reproduced, stored in

More information

Call Center Statistics Web Monitor. Call Center Statistics Web Monitor

Call Center Statistics Web Monitor. Call Center Statistics Web Monitor Call Center Statistics Web Monitor Table of Contents Table of Contents...2 Introduction...3 Application Requirements...3 Starting the Call Center Web Monitor...4 The Call Center Web Monitor Screen...5

More information

FOR SHORETEL CHAMPION PARTNERS ShoreTel Contact Center Workgroups vs. ECC 9 GENERAL SYSTEM OVERVIEW

FOR SHORETEL CHAMPION PARTNERS ShoreTel Contact Center Workgroups vs. ECC 9 GENERAL SYSTEM OVERVIEW FOR SHORETEL CHAMPION PARTNERS ShoreTel Contact Center Workgroups vs. ECC 9 Features Targeted Solutions Workgroup GENERAL SYSTEM OVERVIEW Informal ACD Groups Enterprise Contact Center 9 Medium to Large

More information

ShoreTel Enterprise Contact Center 8 Report Data Fields

ShoreTel Enterprise Contact Center 8 Report Data Fields ShoreTel Enterprise Contact Center 8 Report Data ields November 2012 Legal Notices Document and Software Copyrights Copyright 1998-2012 by ShoreTel Inc., Sunnyvale, California, USA. All rights reserved.

More information

Logging In. Supervisor Set Up. Contents. No table of contents entries found.

Logging In. Supervisor Set Up. Contents. No table of contents entries found. Contents No table of contents entries found. Logging In Launch the Mysphere Call Center icon located on your desktop by double clicking it. Your log in screen will appear. (To create an icon on your desktop,

More information

Allworx Queuing and Automated Call Distribution Guide (Release 7.2.3.x)

Allworx Queuing and Automated Call Distribution Guide (Release 7.2.3.x) Allworx Queuing and Automated Call Distribution Guide (Release 7.2.3.x) No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic,

More information

CALL CENTER REPORTS GUIDE

CALL CENTER REPORTS GUIDE CALL CENTER REPORTS GUIDE RELEASE 18.0 DOCUMENT VERSION 2 BroadWorks Guide Copyright Notice Copyright 2011 BroadSoft, Inc. All rights reserved. Any technical documentation that is made available by BroadSoft,

More information

Hosted VoIP Feature Set

Hosted VoIP Feature Set Hosted VoIP Set AUTO ATTENDANTS Customer Portal Top Level Auto Attendant (Always On) Multiple Top Level Auto Attendants (Always on) Top Level Auto Attendant (Time Based) Sub-Level Auto Attendants Web based

More information

MITEL. Call Accounting

MITEL. Call Accounting MITEL Call Accounting User Guide Version 6.0.2 December 10, 2012 NOTICE The information contained in this document is believed to be accurate in all respects but is not warranted by Mitel Networks Corporation

More information

Allworx Queuing and Automated Call Distribution Guide (Release 7.1.0.x)

Allworx Queuing and Automated Call Distribution Guide (Release 7.1.0.x) Allworx Queuing and Automated Call Distribution Guide (Release 7.1.0.x) No part of this publication may be reproduced, stored in a retrieval system, or transmitted, in any form or by any means, electronic,

More information

HP EPICCenter Contact Center Software for VCX Solutions Series

HP EPICCenter Contact Center Software for VCX Solutions Series HP EPICCenter Contact Center Software for VCX Solutions Series Data sheet Product overview The HP EPICCenter Contact Center Software for VCX Solutions Series lets organizations offer their customers comprehensive

More information

HP EPICCenter Contact Center Software for VCX Solutions Overview

HP EPICCenter Contact Center Software for VCX Solutions Overview Overview Models HP EPIC 10-10-1 Base VCX Software Package HP EPIC 10-1 Base Upgrade VCX Software HP EPIC Agent Set of 5 Upgrade VCX Software HP EPICCenter for NBX-to-VCX Software Upgrade JE261A JE270A

More information

Auto Attendants. Call Management

Auto Attendants. Call Management Auto Attendants Customer Portal Top Level Auto Attendant (Always On) Multiple Top Level Auto Attendants (Always on) Top Level Auto Attendant (Time Based) Sub-Level Auto Attendants Web based user interface

More information

Chapter 1 prairiefyre Contact Center Solutions suite. About the 6110 CCM User Guide... 2

Chapter 1 prairiefyre Contact Center Solutions suite. About the 6110 CCM User Guide... 2 version 3.0 -XQH &RQWHQWV Chapter 1 prairiefyre Contact Center Solutions suite Features and benefits............................................ 2 Licencing.......................................................

More information

- Inbound/Outbound call blending. Agents are sent pre-loaded outgoing calls when no incoming

- Inbound/Outbound call blending. Agents are sent pre-loaded outgoing calls when no incoming VoiceGuide ACD Introduction VoiceGuide ACD system is included as part of VoiceGuide v7. Features: - Smart call routing to agents (skill based, algorithm based, etc) - In queue announcements. - Caller returns

More information

MITEL SIP CoE Technical. Configuration Note. Configure MCD for use with Thinktel SIP Trunking Service. SIP CoE 12-4940-00197

MITEL SIP CoE Technical. Configuration Note. Configure MCD for use with Thinktel SIP Trunking Service. SIP CoE 12-4940-00197 MITEL SIP CoE Technical Configuration Note Configure MCD for use with SIP Trunking Service SIP CoE NOTICE The information contained in this document is believed to be accurate in all respects but is not

More information

UCLA Communications Technology Services. Agent User Guide. for Electronic Business Sets. CTS Application Support Services

UCLA Communications Technology Services. Agent User Guide. for Electronic Business Sets. CTS Application Support Services UCLA Communications Technology Services Au to m at i c Call Distribution Agent User Guide for Electronic Business Sets Introduction Automatic Call Distribution (ACD) is an advanced call-processing product,

More information

OAISYS SIP Trunk Integration

OAISYS SIP Trunk Integration OAISYS SIP Trunk Integration 05/11/2011 Americas Headquarters OAISYS 7965 South Priest Drive, Suite 105 Tempe, AZ 85284 USA www.oaisys.com (480) 496-9040 OVERVIEW OAISYS introduces the ability to record

More information

Call centre solutions

Call centre solutions Call centre solutions Automatic call distribution Do you value your main asset? How often do your customers hang up? If your business cannot respond quickly, your customers will go to your competitors.

More information

MITEL SIP CoE. Technical. Configuration Notes. Configure the Mitel 3300 MCD 4.1 for use with Paetec Broadworks Softswitch. SIP CoE 08-4940-00035

MITEL SIP CoE. Technical. Configuration Notes. Configure the Mitel 3300 MCD 4.1 for use with Paetec Broadworks Softswitch. SIP CoE 08-4940-00035 MITEL SIP CoE Technical Configuration Notes Configure the Mitel 3300 MCD 4.1 for use with Broadworks Softswitch SIP CoE 08-4940-00035 NOTICE The information contained in this document is believed to be

More information

Report samples. Copyright Akixi Limited, All Rights Reserved

Report samples. Copyright Akixi Limited, All Rights Reserved Report samples Akixi 1000, the Dashboard On Your Business...2 Historical Call List...3 Where can I see details of each call made or received and search for specific calls by criteria?...3 Unreturned Lost

More information

Unified Contact Center

Unified Contact Center Unified Contact Center for Microsoft Lync Server 2010 & 2013 Qualified Contact Center Solution MaxACD Unified Contact Center for Microsoft Lync Server 2010 and 2013 With Microsoft Lync now being deployed

More information

Call Center - Supervisor Application User Manual

Call Center - Supervisor Application User Manual Forum 700 Call Center Supervisor Application User Manual Legal notice: Belgacom and the Belgacom logo are trademarks of Belgacom. All other trademarks are the property of their respective owners. The information

More information

AUTO ATTENDANTS CALL MANAGEMENT

AUTO ATTENDANTS CALL MANAGEMENT AUTO ATTENDANTS Customer Portal Top Level Auto Attendant (Always On) Multiple Top Level Auto Attendants (Always on) Top Level Auto Attendant (Time Based) Sub-Level Auto Attendants Web based user interface

More information

SIP Trunking using the Optimum Business SIP Trunk adaptor and the AltiGen Max1000 IP PBX version 6.7

SIP Trunking using the Optimum Business SIP Trunk adaptor and the AltiGen Max1000 IP PBX version 6.7 SIP Trunking using the Optimum Business SIP Trunk adaptor and the AltiGen Max1000 IP PBX version 6.7 Goal The purpose of this configuration guide is to describe the steps needed to configure the AltiGen

More information

Automatic Call Distribution (ACD)

Automatic Call Distribution (ACD) UNIVERGE SV8100 Issue 8.01 Automatic Call Distribution (ACD) Description Automatic Call Distribution (ACD) uniformly distributes calls among agents of a programmed ACD Group. When a call rings into an

More information

Hosted Business Class VoIP Features

Hosted Business Class VoIP Features Hosted Business Class VoIP s Customer Portal Web based user interface that allows users to configure their PBX, create call queues and groups, view call detail records and billing information, listen to

More information

Automatic Call Distribution (ACD) SYSTEM MANUAL

Automatic Call Distribution (ACD) SYSTEM MANUAL Automatic Call Distribution (ACD) SYSTEM MANUAL 76-110-0430/E Release 5 Issue 2 76-110-0430/E Release 5 Issue 2 Automatic Call Distribution (ACD) SYSTEM MANUAL Telrad Telecommunications Inc. Farmingdale,

More information

ACD 2000 Agent Guide for the Superset 4015

ACD 2000 Agent Guide for the Superset 4015 ACD 2000 Agent Guide for the Superset 4015 DUE TO THE DYNAMIC NATURE OF THE PRODUCT DESIGN, THE INFORMATION CONTAINED IN THIS DOCUMENT IS SUBJECT TO CHANGE WITHOUT NOTICE. MITEL CORPORATION, ITS AFFILIATES,

More information

Call Centre Solutions

Call Centre Solutions Call Centre Solutions When Every Call Matters Topics of Discussion What happens when a call arrives Panasonic s Call Distribution Methods What happens when all the members / agents are busy or not available

More information

White Paper Integration of TTY Calls into a Call Center Using the Placeholder Call Technique Updated: February 2007

White Paper Integration of TTY Calls into a Call Center Using the Placeholder Call Technique Updated: February 2007 Overview of Call Centers White Paper Integration of TTY Calls into a Call Center Using the Placeholder Call Technique Updated: February 2007 All organizations have a phone system, but a call center has

More information

A Highly Flexible, Two-Tiered Offering

A Highly Flexible, Two-Tiered Offering brochure MITEL MiCONTACT CENTER BUSINESS & ENTERPRISE EDITION A Highly Flexible, Two-Tiered Offering Mitel Mi Business and Enterprise Edition are designed for small-and-medium to enterprise-sized businesses

More information

MITEL SIP CoE. Technical. Configuration Note. Configure MCD for use with Intelepeer Service provider SIP Trunking. SIP CoE 14-4940-00313

MITEL SIP CoE. Technical. Configuration Note. Configure MCD for use with Intelepeer Service provider SIP Trunking. SIP CoE 14-4940-00313 MITEL SIP CoE Technical Configuration Note Configure MCD for use with Intelepeer Service provider SIP Trunking SIP CoE 14-4940-00313 NOTICE The information contained in this document is believed to be

More information

UCLA Communications Technology Services. Supervisor User Guide. for Electronic Business Sets. CTS Product Training

UCLA Communications Technology Services. Supervisor User Guide. for Electronic Business Sets. CTS Product Training UCLA Communications Technology Services Au to m at i c Call Distribution Supervisor User Guide for Electronic Business Sets Introduction Automatic Call Distribution (ACD) is an advanced call-processing

More information

SIP Trunking using Optimum Business SIP Trunk Adaptor and the Allworx 6x IP PBX 7.1.6.1

SIP Trunking using Optimum Business SIP Trunk Adaptor and the Allworx 6x IP PBX 7.1.6.1 ALLWORX SIP Trunking using Optimum Business SIP Trunk Adaptor and the Allworx 6x IP PBX 7.1.6.1 Goal The purpose of this configuration guide is to describe the steps needed to configure the Allworx 6x

More information

PRIMUS CALL CENTRE: AGENTS & SUPERVISOR GUIDE

PRIMUS CALL CENTRE: AGENTS & SUPERVISOR GUIDE PRIMUS CALL CENTRE: AGENTS & SUPERVISOR GUIDE PRIMUS BUSINESS SERVICES CALL CENTRE AGENT & SUPERVISOR USER GUIDE PRIMUSBUSINESS.CA 1 v1.2 20140512 TABLE OF CONTENTS 1 About This Document 6 1.1 Audience

More information

Automatic Call Distribution

Automatic Call Distribution Automatic Call Distribution Agent User Guide UCLA INFORMATION TECHNOLOGY SERVICES Introduction Automatic Call Distribution (ACD) is an advanced callprocessing product, offering dynamic call distribution.

More information

BCMS VU. BCMS Vu Training. Table of Contents

BCMS VU. BCMS Vu Training. Table of Contents BCMS Vu Training Table of Contents How the Definity Stores Data. Page 2 Real-Time Graphical Reports. Page 3 Real-Time Pie Chart Reports.. Page 5 Real-Time Text Reports.. Page 7 Time Trace Reports. Page

More information

8335 Guilford Road Suite H Columbia MD 21046 www.acctelecom.com 410.995.0101 888.226.2216

8335 Guilford Road Suite H Columbia MD 21046 www.acctelecom.com 410.995.0101 888.226.2216 8335 Guilford Road Suite H Columbia MD 21046 www.acctelecom.com 410.995.0101 888.226.2216 VoIP s Group: Auto Attendant Customer Portal Top Level Auto Attendant (Always On) Multiple Top Level Auto Attendants

More information

Exam Name: Contact Center RIS.6.0 Application Developer Exam Type: Nortel Exam Code: 920-167 Doc Type: Q & A with Explanations Total Questions: 60

Exam Name: Contact Center RIS.6.0 Application Developer Exam Type: Nortel Exam Code: 920-167 Doc Type: Q & A with Explanations Total Questions: 60 Question: 1 Company.com has Contact Center Manager Server Rls. 6.0. As standard practice when structuring the Master Script for Transfer, which action should be applied? A. Do NOT use separate section

More information

BroadWorks Call Center Guide

BroadWorks Call Center Guide BroadWorks Call Center Guide Table of Contents Log into Call Center Configuration Settings Page 3 Change Your Password... Page 3 Dashboard... Page 4 Agent View and Status... Page 5 Change Agent ACD State...

More information

Routing a Call. Properly route calls

Routing a Call. Properly route calls Routing a Call Understanding the call-routing process helps you set up the configuration of your system software and create effective scripts. Properly route calls, page 1 Route a call, page 2 Routing

More information

ShoreTel Workgroup Real-Time Monitor

ShoreTel Workgroup Real-Time Monitor SHORETEL PROFESSIONAL SERVICES ShoreTel Workgroup Real-Time Monitor User & Installation Guide Introduction... 3 ShoreTel Workgroup Monitor Client Application... 4 Main Window... 4 Configuration of Options...

More information

Category: ClearTrunk Hosted PBX Features

Category: ClearTrunk Hosted PBX Features Category: ClearTrunk Hosted PBX s Group: Auto Attendants Customer Portal Top Level Auto Attendant (Always On) Multiple Top Level Auto Attendants (Always on) Top Level Auto Attendant (Time Based) Sub-Level

More information

Vision Call Centre. SpliceCom. Britain s leading developer of telephone systems

Vision Call Centre. SpliceCom. Britain s leading developer of telephone systems Vision Call Centre SpliceCom Britain s leading developer of telephone systems Vision Call Centre Advanced inbound call centre app for increased business productivity whatever the size or requirement. Vision

More information

3300 IP Communications Platform

3300 IP Communications Platform MITEL 3300 IP Communications Platform ACD Agent/Supervisor Guide for the Mitel 5330/5340 IP Phones NOTICE The information contained in this document is believed to be accurate in all respects but is not

More information

SUPERVISOR USER GUIDE

SUPERVISOR USER GUIDE Automatic Call Distribution (ACD) SUPERVISOR USER GUIDE 76-110-0440/G Issue 1 Printed in Israel 76-110-0440/G, Issue 1 76-110-0440/G, Issue 1 Automatic Call Distribution (ACD) SUPERVISOR USER GUIDE Telrad

More information

BusinessPhone - Call Center Solutions

BusinessPhone - Call Center Solutions Your connection to the world BusinessPhone - Call Center Solutions 1 Why a Call Center? "... service is your most strategic competitive weapon in the fight to win and keep customers." (Harvard Business

More information

Nortel Contact Center/Symposium Report Library Catalog

Nortel Contact Center/Symposium Report Library Catalog 1 Agent Agent Activity By Supervisor - Daily Grouped by Supervisor then by agent. This report Timestamp, Logged In Time, Not Ready Time, ACD Talk Supervisor, Agent summarizes the daily agent activity for

More information

Automatic Call Distribution

Automatic Call Distribution Automatic Call Distribution Supervisor User Guide UCLA INFORMATION TECHNOLOGY SERVICES Introduction Automatic Call Distribution (ACD) is an advanced callprocessing product, offering dynamic call distribution.

More information

MITEL MIVOICE BUSINESS

MITEL MIVOICE BUSINESS MITEL MIVOICE BUSINESS ACD AGENT/SUPERVISOR GUIDE FOR F THE MIVOICE 5330 AND 5340 IP PHONES NOTICE The information contained in this document is believed to be accurate in all respects but is not warranted

More information

AUTOMATIC CALL DISTRIBUTION (ACD) INSTALLATION MANUAL

AUTOMATIC CALL DISTRIBUTION (ACD) INSTALLATION MANUAL Notice Note that when converting this document from its original format to a.pdf file, some minor font and format changes may occur. When viewing and printing this document, we cannot guarantee that your

More information

Sample Reports - Version 9.0 Business Intelligence & Unified Communications Reporting

Sample Reports - Version 9.0 Business Intelligence & Unified Communications Reporting Sample Reports - Version 9.0 Business Intelligence & Unified Communications Reporting All information in this document is based upon product specifications available at the time of printing. ISI Telemanagement

More information

ACD System Administration Guide (Avaya) Presence Software

ACD System Administration Guide (Avaya) Presence Software ACD System Administration Guide (Avaya) Presence Software Version 9.2 Date: 09/2014 2 ACD System Administration Guide (Avaya) Contents 1. Outbound... services 3 Progressive,... Predictive 3 Preview...

More information

User Manual. Call Center - Supervisor Application

User Manual. Call Center - Supervisor Application User Manual Call Center - Supervisor Application Release 8.0 - September 2010 Legal notice: Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks

More information

Vision User Manual. Version 1.4 December 2012

Vision User Manual. Version 1.4 December 2012 Vision User Manual Version 1.4 December 2012 Document No. 013 Version No. v1.4/1212/6 Copyright SpliceCom Ltd SpliceCom Ltd The Hall Business Centre, Berry Lane Chorleywood, Herts WD3 5EX Tel: 01923 287700

More information

ANPI VIP Call Center. A Hosted Call Center Solution. User Guide

ANPI VIP Call Center. A Hosted Call Center Solution. User Guide ANPI VIP Call Center A Hosted Call Center Solution User Guide Table of Contents OVERVIEW 3 ANPI CALL CENTER USER TYPES 3 CALL CENTER SET-UP 4 Add a User 4 Edit User 6 Manage the Call Center 8 CALL CENTER

More information

Template 1 - Call Center

Template 1 - Call Center Template 1 - Call Center Basic story Description This is a normal call center, open during UVA official business hours (8AM-5PM, Monday through Friday), and closed after business hours and on weekends.

More information

Cisco WebView Reporting

Cisco WebView Reporting Data Sheet Cisco WebView Reporting Improving customer service in a resource-efficient manner is critical to the success of any contact center. To produce such operational excellence in their facilities,

More information

User Manual in English. Call Center 1.0-1.0 RC Elastix. For more information visit www.elastix.org

User Manual in English. Call Center 1.0-1.0 RC Elastix. For more information visit www.elastix.org User Manual in English Call Center 1.0-1.0 RC Elastix For more information visit www.elastix.org 1. Call Center This modules objective is to generate calls automatically to numbers that have been previously

More information

Understanding the Data Discrepancy between Different Cisco Unified CCX Reports

Understanding the Data Discrepancy between Different Cisco Unified CCX Reports Understanding the Data Discrepancy between Different Cisco Unified CC Reports Cisco Unified Contact Center Express (Unified CC) provides several reporting capabilities which includes several details of

More information

CHECKLIST FOR CDR INTEGRATIONS

CHECKLIST FOR CDR INTEGRATIONS CHECKLIST FOR CDR INTEGRATIONS HOW TO PREPARE CDR INTEGRATIONS This document is intended to provide an overview of the requirements for preparing and configuring CDR integrations for the CyberTech Recording

More information

Call Center Configuration Quick Reference Guide

Call Center Configuration Quick Reference Guide Call Center Configuration Quick Reference Guide Table of Contents About MegaPath Call Center... 2 How to Configure Your Call Center... 2 Voice Administration - Dashboard... 3 Name... 3 Settings... 4 Group

More information

Contents 1. Setting up your Phone Phone Setup Phone Usage 2. User Portal 3. Softphone for your computer 4. Faxing

Contents 1. Setting up your Phone Phone Setup Phone Usage 2. User Portal 3. Softphone for your computer 4. Faxing User Guide 1 Contents 1. Setting up your Phone Phone Setup Phone setup instructions Recording Voicemail Greeting and Voicemail Menu Testing tools Phone Usage Call Transfer, Call Forwarding and Do Not Disturb

More information

ACD REPORT SERVER GETTING STARTED...

ACD REPORT SERVER GETTING STARTED... Table of Contents OVERVIEW... 5 INTRODUCTION... 5 WHO CAN USE THE ACD REPORT SERVER?... 5 ACD REPORT SERVER KEY FEATURES... 5 ACD REPORT SERVER BENEFITS... 6 ACD REPORT SERVER ARCHITECTURE... 7 GENERAL

More information

managedip Hosted TDS Table of Contents Call Center Administrator Guide

managedip Hosted TDS Table of Contents Call Center Administrator Guide Table of Contents Setting up a Call Center Enterprise Settings... 1 Call Center Settings... 6 Agent Settings... 9 Assigning Users... 10 Call Center Features... 11 Directory Number Hunting... 12 Announcements

More information

Benefits Of Upgrading To The Latest CIX Processor

Benefits Of Upgrading To The Latest CIX Processor Benefits Of Upgrading To The Latest CIX Processor The Bits: This document is a reference to help you discover the benefits of selling existing Strata CIX system upgrading to release 4 processor: ACTU3A,

More information