Equipment Repairs Policy. Warranty Replacement Scheme. EMEA Business Partners
|
|
- Kory McKinney
- 8 years ago
- Views:
Transcription
1 Equipment Repairs Policy And Warranty Replacement Scheme For EMEA Business Partners Issue 4.2 March 2014 Page 1 of 23
2 Contents 1. Warranty Terms... 3 Limited Warranty Product Warranty and Repair Arrangements... 4 Summary... 4 Warranty Replacement Scheme for In-Warranty Failures... 5 Out of Box Failures... 7 Chargeable Out of Warranty Repairs Returns Procedure Process for In-Warranty Returns Process for Out of Box Failure Replacement Process Flow Chart Returns Process Flow Chart Returns Process Flow Chart Process for Out Of Warranty Repair Fixed Price Process for Out Of Warranty Repair No Fixed Price European Repair Centre (ERC) Shipping Address / Contacts Carriage & Shipping Shipping Packaging Insurance Invoicing Technical Support Turnaround Time ERC Measurement of Turnaround Time (TAT) Priority of Work Quality Accreditation Objectives Escalation Process Further Escalation Complaints Procedure Document Control Issue Date Status Issue 0.x May 2011 Drafts for checking Issue 1.x June 2011 Internal circulation Issue 2 August 2011 First Issue Issue 3 February 2012 Updated contact names on P22 Issue 4 August 2012 Minor changes to Warranty of Repairs section on Page 9 Issue 4.1 October 2012 Clarifications of procedures for chargeable repairs Issue 4.2 March 2014 Replace MyRMA with RMA request. Replace contact for further escalation Page 2 of 23
3 1. Warranty Terms Limited Warranty This warranty specifies Tyco Security Products sole obligation for American Dynamics, Software House and Kantech branded products and EMEA Business Partners exclusive remedy with respect to the Products. Under the Warranty Replacement Scheme operated in EMEA, Tyco Security Products will repair or provide a comparable replacement for any merchandise proved defective in material or workmanship for the period after the date of shipment defined in our published EMEA Price List except as noted below: Continuous operation of any motors, belts, gear heads or gears due to auto-pan or similar modes of operation on dome cameras and similar products is outside the scope of this warranty and is specifically excluded. Tyco Security Products shall provide warranty on all replacement parts and repairs (original fault) for the remaining portion of the original warranty period. This warranty shall not apply to appearance or accessory items (except furnished external power supplies) including but not limited to antennas, knobs, cabinets, dust covers, connecting cables or user replaceable items such as lamps and fuses. This warranty becomes void in the event the serial numbers are altered, defaced or removed. This warranty shall not in any event extend or apply to repairs or replacements necessitated by any cause beyond the control of Tyco Security Products including but not limited to improper installation, incorrect power supplies, voltage fluctuations, lightning or induced electrical surges, misuse, neglect, lack of proper maintenance, unauthorised interference, attempted repairs whether or not authorised, modifications to either hardware or software, damage resulting from the use of non-approved parts or supplies not purchased from Tyco Security Products, wear and tear, accident, civil unrest, riot, Force Majeure or Acts of God. In such cases Tyco Security Products reserves the right to make a surcharge for the repair or decline to attempt to repair any product affected. Tyco Security Products shall in no event be liable for any incidental, consequential or other direct or indirect loss or damages whether foreseeable or unforeseeable suffered by the Business Partner or any of its customers or their employees or agents or any other person arising out of or in connection with this agreement or with the sale, use, design or performance of any product. Tyco Security Products takes no responsibility whatsoever for any Business Partner or customer data or images contained within any unit returned for repair/replacement. All claims for parts allegedly defective under this warranty shall be submitted together with the model and serial number of the products from which the part was taken, the date of sale and such further information as we may require from time to time. Tyco Security Products shall have no liability in respect of any claim. The Business Partner shall not deduct from any payment due to Tyco Security Products any amount or credits in respect of any returned material or parts, warranty claims, invoicing discrepancies or otherwise without our prior written approval. In the event that the Business Partner considers it advisable to make adjustments with their respective customer on its own responsibility, under this warranty or otherwise, adjustments will not be binding upon Tyco Security Products unless and until approved in writing by Tyco Security Products. Tyco Security Products makes no warranty of any kind (except of title) either expressed or implied including without limitation any warranty of merchantability or fitness for any particular purpose as to any products or information furnished to the Business Partner in connection with this agreement except as expressly provided for in this limited warranty. The Limited Warranty does not in any way affect statutory rights. Page 3 of 23
4 2. Product Warranty and Repair Arrangements Summary Product failures may be categorised as: In-Warranty Failure This applies to qualifying products which are deemed to have failed within their specified Warranty period. Out of Box Failure Special provisions for Out of Box failure apply to qualifying products which fail on initial power up or during commissioning, normally within 30 days of shipment from Tyco. Out of Warranty Repairs Tyco Security Products operates a repairs service and will wherever possible offer a fixed price for the repair of products which are no longer covered by warranty. Warranty periods vary for individual items and are published in the EMEA Business Partner Price List. The warranty period for products not manufactured by Tyco Security Products shall be in accordance with the warranty terms of the respective manufacturer. Faulty items must be returned to Tyco Security Products using the correct Returns Procedure as detailed in Section 3 of this document. Where a replacement item has been supplied by Tyco under this process, credit will only be issued for the returned item once it is confirmed as a genuine warranty/out of Box failure. Where no replacement item has been supplied, no credit will be issued and the item will be repaired and returned to the business partner as detailed later in this document. Full details of Tyco Security Products Warranty and Repair Arrangements are contained in the following pages. Page 4 of 23
5 Warranty Replacement Scheme for In-Warranty Failures Any qualifying product failing within its specified warranty period will be classed as an In- Warranty failure. In the event that a product is deemed to have fallen outside the specified warranty period defined by its date of manufacture and where there is credible and documented evidence to demonstrate the end user has had ownership for a lesser period Tyco Security Products may at their discretion treat the product as being in warranty. Any previous warranty terms which can be proven to still be applicable will be honoured. Under the Warranty Replacement Scheme, Business Partners may purchase a Warranty Replacement for a listed product which has failed within the warranty period. Warranty Replacement items are ordered using standard product part number(s) under the Warranty Replacement Scheme at the Business Partner s usual price and are subject to all normal delivery terms. All normal Terms and Conditions including cancellation terms apply to orders placed for Warranty Replacement items. Faulty items must be returned to Tyco Security Products using the returns process detailed in Section 3 of this document. Business Partners can only receive a credit for a failed product once it has been returned and is confirmed by Tyco Security Products as being a true In-Warranty failure. Product Returns When making a Return, it is important for a Business Partner to detail within RMA request if they have purchased a Warranty Replacement item. If RMA request does not show that a Warranty Replacement part was purchased, Tyco will not issue a credit and will repair and return the failed unit to the Business Partner. No credit will be issued once a repaired unit has been returned to a Business Partner. In the event that a Warranty Replacement has been ordered: Where the returned product is found to be in warranty and is deemed by Tyco Security Products or their approved European Repair Centre (ERC) to be a genuine warranty failure a full credit will be issued for the value of the Warranty Replacement item. Where the returned product is found to be in warranty but is deemed by Tyco Security Products or their approved ERC not to be faulty (no fault found) a partial credit will be issued. The value of the partial credit will be calculated as the value of the Warranty Replacement item less any inspection and shipping fees incurred by Tyco Security Products. Where the returned product is deemed by Tyco Security Products or their approved ERC to be warranty expired or warranty void no credit will be issued and Tyco Security Products reserves the right to levy reasonable charges to cover the inspection and shipping of the goods to and from their premises. If repair is possible, Tyco Security Products will offer a quotation for repair although no repairs will be affected until a formal Purchase Order has been received by Tyco in accordance with the guidelines laid out in the next sections. If Page 5 of 23
6 repair is not possible, or if repair is not required by the business partner, Tyco Security Products will either return the failed unit un-repaired, or dispose of the failed unit at the business partner s discretion. Note that charges for disposal may apply. Special order items are specifically excluded from the Warranty Replacement Scheme. Warranty of Replacement Item A Warranty Replacement product will be covered by the remaining balance of the warranty period defined in the published EMEA Business Partner Price List. Outline Returns Process for In-Warranty Failures Full details of the returns process can be found in Section 3 of this document. Page 6 of 23
7 Out of Box Failures Special provisions which allow a product to be classed as an Out of Box failure apply to any qualifying product which fails in warranty on initial power up or during commissioning. This normally applies to failures which occur within 30 days of shipment from a Tyco Security Products distribution centre. Where the product is part of a major project and a failure is discovered during final commissioning and it is more than 30 days after shipment from Tyco Security Products, Tyco Security Products may at their sole discretion and subject to supporting evidence extend the period for special provisions on a case by case basis. Under the special provisions, Business Partners may follow their normal process to order a new Advance Replacement item from Tyco Security Products. Advance Replacement items are ordered at the Business Partner s usual price and are subject to all normal delivery times. All normal Terms and Conditions including cancellation terms apply to orders placed for Advance Replacement items. Faulty items must be returned to Tyco Security Products using the returns process detailed in Section 3 of this document. Business Partners can only receive a credit for a failed product once it has been returned and is confirmed by Tyco Security Products as being a true Out of Box failure. Product Returns When making a Return, it is important for a Business Partner to detail within RMA request if they have purchased an Advance Replacement item. If RMA request does not show that an Advance Replacement part was purchased, Tyco will not issue a credit and will repair and return the failed unit to the Business Partner. No credit will be issued once a repaired unit has been returned to a Business Partner. Business Partners are at liberty to await Tyco Security Products confirmation of Out of Box failure prior to placing further orders. In the event that an Advance Replacement is ordered: Where the returned product is found to be in warranty and is deemed by Tyco Security Products or their approved European Repair Centre (ERC) to be a genuine out of box failure a full credit will be issued for the value of the Advance Replacement item. Where the returned product is found to be in warranty but is deemed by Tyco Security Products or their approved ERC not to be faulty (no fault found) no credit will be issued and the product will be returned to the Business Partner. Tyco Security Products reserves the right to levy reasonable charges to cover the inspection and shipping of the goods to and from their premises. Where the returned product is deemed by Tyco Security Products or their approved ERC to be warranty expired or warranty void no credit will be issued and Tyco Security Products Page 7 of 23
8 reserves the right to levy reasonable charges to cover the inspection and shipping of the goods to and from their premises. If repair is possible, Tyco Security Products will offer a quotation for repair although no repairs will be affected until a formal Purchase Order has been received by Tyco in accordance with the guidelines laid out in the next sections. If repair is not possible, or if repair is not required by the business partner, Tyco Security Products will either return the failed unit un-repaired, or dispose of the failed unit at the business partner s discretion. Note that charges for disposal may apply. Special order items are specifically excluded from the provisions for Out of Box Failure. Warranty of Replacement Item The Advance Replacement supplied in an Out of Box failure situation will be a brand new product so the full warranty will be applied as defined in the published EMEA Business Partner Price List. Returns Process for Out of Box Failures Full details of the returns process can be found in Section 3 of this document. Page 8 of 23
9 Chargeable Out of Warranty Repairs Tyco Security Products operates a repairs service and will wherever possible offer a fixed price for the repair of products which are no longer covered by warranty. The Price List for Fixed Price Repairs is available from your Regional Manager or from Customer Service. Where a product is not listed on the Fixed Price Repair List, it may be returned for inspection and a quotation will be provided if repair is considered to be viable although no repairs will be affected until a formal Purchase Order has been received by Tyco. Outline Returns Process for Chargeable Out of Warranty Repairs Full details of the returns process can be found in Section 3 of this document. Beyond Economical Repair (BER) For products which are no longer covered by warranty, Beyond Economical Repair (BER) is defined as: Units received with printed circuit boards or major electronic components missing. Units with major mechanical or major component damage. In the event that Tyco Security Products deems a product to be Beyond Economical Repair, Tyco Security Products will notify the Business Partner. The Business Partner will need to decide whether to scrap the goods or have them returned. A charge to cover investigation and shipping will be levied for all returned products which are no longer covered by warranty and are subsequently deemed to be Beyond Economical Repair. Charges may also be levied for disposal of unwanted items. Warranty of Repair Where products which are no longer covered by their original warranty are returned to Tyco for chargeable repairs, the European Repair Centre will provide six months warranty on all repair work undertaken. This warranty only covers the repair undertaken and does not extend the overall product warranty. In order to claim under the repair warranty, the item will need to be returned by submitting an RMA request. Additionally, we will need: The faulty product in accordance with RMA Customer Instruction procedure, SRB A detailed report of the fault or symptom must be provided within RMA template. Optionally, a Failure Report Sheet (or similar) which describes the failure symptom may be returned with the physical product Details of the previous repair carried out, if applicable. Details of the previous RMA reference number, if applicable. Page 9 of 23
10 3. Returns Procedure Process for In-Warranty Returns The step by step process covering In-Warranty returns is: Business Partner contacts Customer Services making it known that they have a product which has failed In-Warranty and places an order for a Warranty Replacement part. Note that all normal Terms and Conditions, including cancellation terms apply. Customer Services will need details of the failed unit, including the original purchase order number and may require additional information such as Technical Support Case Numbers, Serial Numbers and MAC Addresses. Customer Service will advise based on the date of supply whether the equipment believed to have failed is covered under warranty. This only confirms the original supply date and doesn t mean that Tyco Security Products accepts the product is a genuine warranty failure. The product must be returned using the RMA request for full evaluation. If a Warranty Replacement item is ordered, Customer Services will dispatch the Warranty Replacement product. Supply of a Warranty Replacement part is subject to normal delivery timescales and charges. Warranty Replacements are supplied without ancillary products (except for furnished external power supplies). On receipt of the Warranty Replacement product the Business Partner may need to work with Technical Support to arrange the transfer of any software licenses to their replacement unit. It is imperative that the Business Partner has transferred any software licenses from the suspected failed unit before it is returned to Tyco Security Products for full evaluation. The failed unit should be carefully repacked into its original shipping carton for return. If the original packing is no longer available, then the shipping carton from the Warranty Replacement product should be used. Only furnished external PSUs (i.e. those originally supplied with the product) should be returned. Ancillary items, accessories and cables, etc. should not be returned. Business Partner should fully complete an Returns Material Authorisation (RMA) request and ship goods to Tyco Security Products European Repair Centre (ERC) when RMA is provided. Shipments to the ERC must be fully in accordance with the instructions laid out within the RMA request template. Further details can be found in the instruction document SRB RMA Customer Instructions. Business Partner ships the goods to the appropriate ERC in line with the carriage and shipping instructions below. The RMA will be updated and deemed as Closed once the unit has been agreed as faulty and credit issued, or if the item is no fault found, or warranty void. Page 10 of 23
11 Process for Out of Box Failure The step by step process covering Out of Box failures is: Business Partner contacts Customer Services making it known that they have a product which will be covered by the Special Provisions for an Out of Box Failure and places an order for a new Advance Replacement part making it known this is an Advance Replacement for an Out of Box Failure. Note that all normal Terms and Conditions, including cancellation terms apply. Customer Services will need details of the failed unit, including the original purchase order number and may require additional information such as Technical Support Case Numbers, Serial Numbers and MAC Addresses. Customer Service will advise based on the date of supply whether the equipment believed to have failed is covered under the special provisions for Out of Box failure. This only confirms the original supply date and doesn t mean that Tyco Security Products accepts the product is a genuine warranty failure. The product must be returned using the RMA request for full evaluation. If an Advance Replacement item is ordered, Customer Services will dispatch the Advance Replacement product. Supply of an Advance Replacement part is subject to normal delivery timescales and charges. On receipt of the Advance Replacement product the Business Partner may need to work with Technical Support to arrange the transfer of any software licenses to their Advance Replacement unit. It is imperative that the Business Partner has transferred any software licenses from the suspected failed unit before it is returned to Tyco Security Products for full evaluation. The failed unit should be carefully repacked into its original shipping carton for return. If the original packing is no longer available, then the shipping carton from the Advance Replacement product should be used. All parts which accompanied the failed unit, e.g. manuals, PSUs, cables, etc. must be returned. Business Partner should fully complete an Returns Material Authorisation (RMA) request and ship goods to Tyco Security Products European Repair Centre (ERC) when RMA is provided. Shipments to the ERC must be fully in accordance with the instructions laid out within the RMA request template. Further details can be found in the instruction document SRB RMA Customer Instructions. Business Partner ships the goods to the appropriate ERC in line with the carriage and shipping instructions below. The RMA will be updated and deemed as Closed once the unit has been agreed as faulty and credit issued, or if the item is no fault found, or warranty void. Page 11 of 23
12 Replacement Process Flow Chart Business Partner Advise Customer Service of product failure Customer Service Request Original PO # of failed item. May also need Serial # & Tech Supp Case # for applicable products Customer Service Is a replacement product being ordered? No Refer Business Partner to RMA Process for In Warranty items and Out of Warranty Repairs Customer Service Is the claim within the Warranty Period? No Refer Business Partner to RMA Process for Out of Warranty Repairs Out of Box Failure? No Service Stock Available? Distribution Centre Business Partner No Ships replacement to Business Partner Returns faulty unit See next page New stock available? No Customer Service Offer Fast-Track Repair No Is unit Obsolete? Backwards compatible unit available? Customer Service Offers backwards compatible replacement from New Stock or Service Stock No Page 12 of 23
13 Returns Process Flow Chart Business Partner Request RMA Must cross reference original Purchase Order or Tyco Sales Order # on RMA Business Partner Ships faulty unit back to local DC Distribution Centre Distribution Centre Distribution Centre Receive, visually inspect to validate warranty. Confirm Serial # on unit matches S5 Order Notify Heathrow Customer Service of any discrepancy Update Business Partner Is the item covered by Warranty? No Distribution Centre Notify Business Partner of Warranty Void: No Credit Business Partner Decide whether to: 1. Dispose of failed item 2. Return Un-Repaired 3. Chargeable Repair Did Tyco or ARC Confirm the unit is Faulty? No (No Fault Found) Was this classed as Out of Box Failure? No Customer Service Release Full/Partial credit to Business Partner Was a new Advance Replacement supplied? N o Distribution Centre Notify no fault found. Inspection/shipping charge may apply No Was a Warranty Replacement supplied? Distribution Centre Distribution Centre Notify no fault found. Item will be returned. Inspection/shipping charge may apply Notify no fault found. Inspection/shipping charge may be deducted from credit Page 13 of 23
14 Process for Out Of Warranty Repair Fixed Price The step by step process covering Out of Warranty product failures where a fixed price repair is requested is: Business Partner should fully complete an Returns Material Authorisation (RMA) request ship goods to Tyco Security Products European Repair Centre (ERC) when RMA is provided. Shipments to the ERC must be fully in accordance with the instructions laid out within the RMA request template. Further details can be found in the instruction document SRB RMA Customer Instructions. In order to for the repair to proceed, the Business Partner should provide a formal Purchase Order detailing their Order Number, and the value stated on the Fixed Price Repair Price List. The detail added to the RMA must include details of the Business Partner Purchase Order (PO) Number. The formal Purchase Order must also be forwarded via E Mail to the same ERC which the faulty goods were sent to. Business Partner PO details should be E Mailed to: o tfsuk.service@tycoint.com (for Business Partners in and Ireland) o tfseu.service@tycoint.com (for Business Partners in Continental Europe, Middle East and Africa) Note that without both the Purchase Order number and the formal copy of the Purchase Order, we will be unable to proceed with any repair and will have to place the RMA on hold. The failed unit should be carefully packed into a suitable shipping carton for return. If the original packing is no longer available, alternative packaging should be used. Only furnished external PSUs (i.e. those originally supplied with the product) should be returned. Ancillary items, accessories and cables, etc. should not be returned. Business Partner ships the goods to the appropriate ERC in line with the carriage and shipping instructions below. At the end of the process, the unit will be returned to the Business Partner. Note that Tyco Security Products may levy reasonable fees to cover inspection and shipping costs. The RMA will be updated and deemed as closed once the unit has been agreed as faulty and credit issued, or if the item is no fault found, or warranty void. Page 14 of 23
15 Process for Out Of Warranty Repair No Fixed Price The step by step process covering Out of Warranty product failures where a fixed price repair is requested and Tyco Security Products does not publish a fixed price is: Business Partner should fully complete an Returns Material Authorisation (RMA) request and ship goods to Tyco Security Products European Repair Centre (ERC) when RMA is provided. Shipments to the ERC must be fully in accordance with the instructions laid out within the RMA request template. Further details can be found in the instruction document SRB RMA Customer Instructions. The RMA request should request a quotation for a repair. The failed unit should be carefully packed into a suitable shipping carton for return. If the original packing is no longer available, alternative packaging should be used. Only furnished external PSUs (i.e. those originally supplied with the product) should be returned. Ancillary items, accessories and cables, etc. should not be returned. Business Partner ships the goods to the appropriate ERC in line with the carriage and shipping instructions below. The ERC will examine the goods and provide a fixed price quotation for approval. Business Partner should respond within five working days to accept or reject the quotation. If the Business Partner wishes to accept the quotation and have the goods repaired, the Business Partner must provide a formal Purchase Order detailing their Order Number, the value and any Reference supplied with Tyco s quotation. The formal Purchase Order must also be forwarded via E Mail to the same ERC which the faulty goods were sent to. The relevant ERC will update the RMA with the Business Partner Purchase Order (PO) Number. Business Partner PO details should be E Mailed to: o tfsuk.service@tycoint.com (for Business Partners in and Ireland) o tfseu.service@tycoint.com (for Business Partners in Continental Europe, Middle East and Africa) Note that without both the Purchase Order number and the formal copy of the Purchase Order, we will be unable to proceed with any repair and will place the RMA on hold. At the end of the process, the unit will be returned to the Business Partner. Note that Tyco Security Products may levy reasonable fees to cover inspection and shipping costs. The RMA will be updated and deemed as closed once the unit has been agreed as faulty and credit issued, or if the item is no fault found, or warranty void. Page 15 of 23
16 4. European Repair Centre (ERC) All In-Warranty and Out of Warranty product returns should be shipped directly to the respective ERC. Shipping Address / Contacts For Business Partners located in UK & Ireland: Tyco Security Products Service & Repair Department Letchworth Distribution Centre Dunhams Lane, Letchworth, SG6 1BE Hertfordshire, Direct phone: +44 (0) Hours: 8:30 to 16:30 GMT tfsuk.service@tycoint.com For Business Partners located in all other EMEA Countries: Tyco Security Products Service & Repair Department Echt Distribution Centre Voltaweg 20, 6101XK Echt, The Netherlands Direct phone: +31 (0) Hours: 8:00 to 16:00 CET tfseu.service@tycoint.com Following repair, the unit will be shipped directly back to the Business Partner from the ERC. The ERC only handles units being returned for repair or warranty claims. Page 16 of 23
17 5. Carriage & Shipping Shipping Shipping to the ERC is at your cost using Inco Term DAP (Delivery At Place) Refer to Service & Repair Bulletin EU-SRB Shipping Documentation. Return shipping of repaired items from the ERC to you is at our cost using Incoterm DAP (Delivery At Place). Packaging It is the responsibility of the Business Partner to ensure any returns are adequately packaged to project against damage during shipment to the ERC. Wherever possible the original packaging should be used for returns. For Out of Box Failure and Warranty Replacement claims, the original packaging must be used for a valid claim to be accepted. Insurance Return shipping from the ERC includes insurance against damage theft or loss. This liability is limited to the replacement equipment only. It is the responsibility of our Business Partner to insure goods in transit against damage, theft or loss for all shipments to the ERC. Business Partner Shipping - Any resulting or consequential damage (e.g. if the original failure is no longer visible due to the damage) is not covered under warranty and will be subject to a separate quotation. Page 17 of 23
18 6. Invoicing Any invoicing or credit related queries should be directed to our Customer Services team: For Business Partners located in all EMEA Countries: Customer Service Tyco International 282 Bath Road, Heathrow, UB7 0DQ EMEA Business Partners Customer Services E Mail: custserviceheathrow@tycoint.com Tel: +44 (0) Fax: +44 (0) Page 18 of 23
19 7. Technical Support The EMEA Technical Support Centre will need to be contacted if you need to transfer software licenses or SSAs to a replacement product. All technical support enquiries should be directed to: For Business Partners located in all EMEA Countries: Tyco Security Products - Technical Support Department Echt Distribution Centre Voltaweg XK Echt The Netherlands Hours: 8am to 6pm CET Toll Free: +800 CALLTYCO or ( ) or Direct: Technical Post-Sales Enquiries: emea.support@tycoint.com Technical Pre-Sales Enquiries: emea.presales@tycoint.com Technical Training Enquiries: emea.training@tycoint.com Local Direct Dial Numbers: UK ( ) and ( ) France ( ) and ( ) Spain ( ) and ( ) Germany ( ) Italy ( ) Belgium ( ) Bahrain Greece Russia Turkey United Arab Emirates Page 19 of 23
20 8. Turnaround Time ERC Measurement of Turnaround Time (TAT) With the exception of repairs with no fixed price, the target for Repair and Warranty Credit is 20 working days from point of receipt at the ERC to despatch from the ERC. For repairs with no fixed price, the target repair turnaround time will commence once the repair quotation has been approved in the form of a Purchase Order. Priority of Work Returns and repairs are normally managed on a FIFO (First In, First Out) basis however prioritisation can be requested at any time and all requests will be fully considered in context of operating the repairs scheme to deliver an acceptable service level to all Business Partners. Page 20 of 23
21 9. Quality Accreditation European Repair Centres are ISO9001:2008 and ISO9002 accredited. Objectives All servicing will be made to Good Commercial Standards. Any problems found will be diagnosed and where possible repaired. With the exception of Intellex, software installed on all units repaired will be upgraded to the latest version possible (for that unit). For Intellex, software versions are not normally updated to avoid possible compatibility issues with other system components. Instead the latest patches for the version of software installed on the Intellex will be applied. The ERC will provide a Failure Report Sheet with all repair returns. All units will be tested after servicing has been completed and where applicable additional soak testing will be undertaken. Serviced units will be cleaned as far as possible to ensure that they are cosmetically acceptable, however, it must be noted that this is NOT a refurbishment process. Page 21 of 23
22 10. Escalation Process For Business Partners in and Ireland: Michael Kasapi Manager Quality, Service & Repair - UK Office: +44 (0) Cell: +44(0) mkasapi@tycoint.com For Business Partners in Continental Europe, Middle East and Africa: Roland Ploemmen Manager Quality, Service & Repair - Continental Europe and MEA Office: +31 (0) Cell: +31 (0) rploemmen@tycoint.com Further Escalation Any further escalations can be directed to: David Stonehouse Operations Director Logistics & Distribution EMEA / Tyco Office: +44 (0) Cell: +44 (0) dstonehouse@tycoint.com Page 22 of 23
23 11. Complaints Procedure Product Quality Complaints should be made within an request. In addition, an should be sent to the relevant Quality teams informing them of the complaint. The subject line of the E Mail should read: Customer Complaint for... For Business Partners in and Ireland, please send the E Mail to:. tfsuk.quality@tycoint.com For Business Partners in Continental Europe, Middle East and Africa, please send the E Mail to: tfseu.quality@tycoint.com The Quality Team will: Log complaint in the complaint database Acknowledge receipt of complaint Issue complaint tracking number Handle returns related to the complaint Communicate corrective and preventative action(s) Close complaint in agreement with the Business Partner Page 23 of 23
Dual-Cool Notebook Cooler Pad. User s Manual
Dual-Cool Notebook Cooler Pad Model #: CF4500U User s Manual Rev. 060801 User s Record: To provide quality customer service and technical support, it is suggested that you keep the following information
More informationQualstar Technical Support
Qualstar Technical Support Effective January 1, 2015 Qualstar Announces New Three Tiered Service Program. Below are the key features of each support package available in Qualstar s three tiered service
More informationZebraCare On-Site Service Agreements in the UK and Ireland
ZebraCare On-Site Service Agreement Valid for customers in UK only ZebraCare On-Site Service Agreements in the UK and Ireland Product Description ZebraCare On-Site Service Agreements are annual maintenance
More informationTriton Systems of Delaware, LLC Warranty Statement / Return Policy
Triton Systems of Delaware, LLC Warranty Statement / Return Policy Triton Systems of Delaware, LLC 21405 B Street 866.7.TRITON TRITON WARRANTY STATEMENT 21405 B Street The Manufacturer warrants that the
More informationTC Electronic Extended Warranty Policy
TC Electronic Extended Warranty Policy Revision: February 27 th, 2013 OVERVIEW TC Electronic s standard New Product Limited Warranty covers hardware and provides Software maintenance (as described below)
More informationApogee ProCare Extended Warranty Agreement and Plan - US Residents Only. Apogee ProCare Apogee s Extended Support and Warranty Plan
Apogee ProCare Apogee s Extended Support and Warranty Plan Terms and Conditions Your Apogee ProCare Extended Support and Warranty Plan for the product(s) listed with your Authorization Code, is governed
More informationVOKERA (NEW) AFFINITY UK
VOKERA (NEW) AFFINITY UK TERMS & CONDITIONS 2015 1. The Vokèra Affinity Reward Programme (The Scheme) is being operated by Vokèra Limited, Borderlake House, Unit 7, Riverside Industrial Estate, London
More informationDescription of Services, Target Response Times and Customer Responsibilities:
MAINTENANCE AND SUPPORT SERVICE TERMS CloudShield s products are initially offered with a basic Standard Warranty when shipped from CloudShield. Standard Warranty provides that the (a) CloudShield Hardware
More informationUSB 2.0 4-Port Hub with USB Power Cable. User s Manual
USB 2.0 4-Port Hub with USB Power Cable Model: UH2500 User s Manual 251104-109159 Rev. 061107 User s Record: To provide quality customer service and technical support, it is suggested that you keep the
More informationCUSTOMER SERVICE SLA. Support, Product & Services. Support, Product & Services Page 1
Support, Product & Services Support, Product & Services Page 1 Copyright Notice 2015 Copyright SIMBERRY JSC. All rights reserved. The service and its related documentation are protected by copyright and
More informationService Policies for Europe, Middle East, and Africa Bosch Security Systems
Service Policies for Europe, Middle East, and Africa Bosch Security Systems 2 I Service Policies Service Policies I 3 Contents 1 Introduction 4 2 Overview of our service highlights 5 3 Key repair and exchange
More informationOptical Wireless Mouse. User s Manual
Optical Wireless Mouse Model : OM4000W User s Manual 110935-109154 Rev. 061101 User s Record: To provide quality customer service and technical support, it is suggested that you keep the following information
More informationBancTec Third Party Maintenance, Inc. PRINTER SERVICE CONTRACT
BancTec Third Party Maintenance, Inc. PRINTER SERVICE CONTRACT PLEASE TAKE THE TIME TO READ THE FOLLOWING TERMS AND CONDITIONS UNDER WHICH BANCTEC THIRD PARTY MAINTENANCE, INC. ( BTPM ) AGREES TO PROVIDE
More information1. INTERPRETATIONS AND DEFINITIONS Whenever used in this Agreement, the following terms shall have the meaning set out below:
Support and Maintenance Agreement For all CAE Healthcare Products Introduction to Your Support and Maintenance Services With the purchase of any brand new CAE Healthcare Product, customers are provided,
More informationExtended Warranty for Airconditioner Promotion 2014
Extended Warranty for Airconditioner Promotion 2014 Extended Warranty This Extended Warranty offer is only available on selected wall hung split system air conditioners with a 5 Year manufacturer s warranty
More informationValue Extended Warranty and Premium Extended Warranty. Terms and Conditions
Value Extended Warranty and Premium Extended Warranty Terms and Conditions Your Value Extended Warranty and Premium Extended Warranty (referred to herein as the Plan or Plans ) are governed by these Terms
More informationGenuine Acer Server Warranty Service
Congratulations on your purchase of this quality Acer Server product. Your warranty registration with Acer is essential to maintain a record of you. For Easy Registration Web: www.acer.com.au Phone 1300
More informationInfineon Technologies North America Corp. Terms and Conditions of Sale
Infineon Technologies North America Corp. Terms and Conditions of Sale 1. GENERAL 1.1 Contract Terms. These Terms and Conditions of Sale (the Agreement ) shall apply to any offer made by Infineon Technologies
More informationVPCCCare. Virtual PC Center Service Warranty Program
VPCCCare Virtual PC Center Service Warranty Program Proprietary Notice and Liability Disclaimer The information disclosed in this document, including all designs and related materials, is the valuable
More informationLimited Warranty for PV Modules
Limited Warranty for PV Modules Warranty Terms 2010 Standard PV Module Products ( Modules ) covered by this Limited Warranty for PV Modules ( Warranty ) are: JKMxxxM-72(xxx=170, 175, 180, 185, 190, 195,
More informationTriton Systems of Delaware, LLC. Warranty Statement
Triton Systems of Delaware, LLC 21405 B Street 866.7.TRITON Triton Systems of Delaware, LLC Warranty Statement TRITON WARRANTY STATEMENT The Manufacturer warrants that the products delivered to a distributor
More informationIRON SUPPORT SERVICES LICENSING AGREEMENT
IRON SUPPORT SERVICES LICENSING AGREEMENT A. AGREEMENT. The following are the terms and conditions under which Iron Systems, Inc. ( IRON) agrees to provide support to you ( Customer ) for certain network
More informationGeneral Terms and Conditions of Business
Zielmattenring 6 4563 Gerlafingen General Terms and Conditions of Business These General Terms and Conditions of Business apply to all business relations between montratec AG and the customer. Deviations
More informationCustomer Care Plan. Protection for your product purchase
Customer Care Plan Enjoy Protection for your product purchase Customer Care Plan is provided by Your Retailer, which has entered into a separate indemnity agreement with WFI Insurance Limited (WIL) trading
More informationTerms and Conditions of Sale
Broadberry Data Systems Limited ("The Company") Terms and Conditions of Sale 1. General a) Unless otherwise expressly agreed in writing by a Director (or authorised executive) of the Company all goods
More informationProduct exchange Plan
Product exchange Plan 24 Hour Customer Service See inside for full terms and conditions. Product exchange Plan Protection for your phone, peace of mind for you. Product exchange Plan Get a new PHone instantly
More informationMEDION LIMITED WARRANTY Medion warrants that the product accompanied by this limited warranty is free from manufacturing defects in material or workmanship for a period of 12 months from the date of original
More informationGeneral Terms and Conditions of Sale and Delivery of Federatie Aandrijven en Automatiseren (Trading Companies)
General Terms and Conditions of Sale and Delivery of Federatie Aandrijven en Automatiseren (Trading Companies) Filed at the Registry of the Court of The Hague, the Netherlands, on 6 December 2011, under
More informationJeunesse European Generic Website Terms and Conditions of Supply
Jeunesse European Generic Website Terms and Conditions of Supply This page (together with the documents referred to on it) tells you the terms and conditions on which we supply any of the products ( Products
More informationPRICES ACCOUNT TERMS ECOMMERCE STORE
PRICES A) Goods are sold on Recommended Retail Price (RRP) less trade margin plus GST. B) All RRP on invoices are current at the date of dispatch, including GST. There is no obligation to comply with our
More informationEASY LED Oy General Terms of Sale
EASY LED Oy General Terms of Sale 1. Scope of application These General Terms of Sale (hereinafter referred to as the Terms ) shall be applied to the sale and supply of lighting products manufactured by
More informationxerox Xerox D95/D110/125/136 Warranty
xerox Xerox D95/D110/125/136 Warranty 2010 Xerox Corporation. All Rights Reserved. Unpublished rights reserved under the copyright laws of the United States. XEROX and XEROX and DESIGN, eclick, Page Pack
More informationYOUR RIGHTS UNDER THE AUSTRALIAN CONSUMER LAW
careplan MYER CARE PLAN Congratulations on purchasing Your new product and electing to protect Your product with the Myer Care Plan. The Myer Care Plan is supplied by Myer Pty Ltd (ABN 83 004 143 239)
More informationThe Difference is in the Detail AC Module Limited Warranty LGxxxA1C-B3
Perfect ACTM Module The Difference is in the Detail AC Module Limited Warranty LGxxxA1C-B3 LG SOLAR AC MODULE LIMITED WARRANTY The limited warranties specified below (hereinafter Limited Warranty ) apply
More informationTERMS AND CONDITIONS OF SALE. Quotations, Purchase Orders, Acknowledgements, Packing Lists/Slips, Invoices & Credits
Quotations, Purchase Orders, Acknowledgements, Packing Lists/Slips, Invoices & Credits All quotations of Seller ( Quotations ) and purchase orders of Buyer ( Purchase Orders ) shall be subject to these
More informationProduct and Services Agreement BT Conferencing Maintenance Service Schedule
Product and Services Agreement 1. DEFINITIONS The following definitions shall apply, in addition to those in the General Terms and Conditions of the PSA. Ancillary Devices BT Authorized Service Representative
More informationAssured Service Program Agreement
Assured Service Program Agreement Notebook, Tablet and All-in-One PC Part Numbers: ASP-1Y, ASP-3Y Product Covered The Assured Service Program Agreement ( Agreement or Service ) is applicable only to Toshiba
More informationBancTec, Inc. PRINTER SERVICE CONTRACT
BancTec, Inc. PRINTER SERVICE CONTRACT PLEASE TAKE THE TIME TO READ THE FOLLOWING TERMS AND CONDITIONS UNDER WHICH BANCTEC, INC. ( BancTec ) AGREES TO PROVIDE REPAIR SERVICES FOR YOUR DELL PRINTER. THIS
More information90-Day Limited Warranty
90-Day Limited Warranty idevices Customer Experience Team 888.313.7019 support@idevicesinc.com We offer a 90-day limited warranty for ishower manufacturing defects. The limited 90-day warranty period for
More informationService from the Start with Comprehensive Coverage for TETRA Terminals (Europe and Africa)
Service from the Start with Comprehensive Coverage for TETRA Terminals (Europe and Africa) Service from the Start with Comprehensive Coverage is a unique prepaid service that includes normal wear and tear,
More informationExtended Warranty and Service Agreements for Distributed Antenna System (DAS)
Extended Warranty and Service Agreements for Distributed Antenna System (DAS) TE s Distributed Antenna System (DAS) products are designed and manufactured to operate for many years. Customers can further
More informationQNX Software Systems or QSS means QNX Software Systems International Corporation.
INVOICE TERMS AND CONDITIONS OF SALE (QNX Software Systems designated below as "Seller") DEFINITIONS In these Terms: QNX Software Systems or QSS means QNX Software Systems International Corporation. "Software"
More informationPRECISION MICRODYNAMICS QUOTE / CONTRACT TERMS & CONDITIONS
1. General. All quotations furnished by Precision MicroDynamics Inc., ( PMDi ) or its authorized agents are solely for information of the party to whom the Quotation is addressed ( Buyer ). Any order resulting
More informationTERMS AND CONDITIONS 1 CONTRACT INFORMATION
SUMMARY These terms and conditions govern your purchase of SocketCare for the Covered Products and for the Contract Term as defined herein. SocketCare is a service program that provides for the repair
More informationProtection for your product purchase
Protection for your product purchase Easicare is provided by Bing Lee Electrics Pty Ltd, which has entered into a separate indemnity agreement with Wesfarmers General Insurance Limited (WGIL) ABN 24 000
More informationWarranty Terms. QLogic-provided cables, optics and other accessories are warranted for ninety (90) days from date of purchase.
Warranty Terms QLogic Corporation ("QLogic") provides the following warranties to the original purchaser of QLogic products from QLogic or, in the case of resale, to the initial end user customer (the
More informationEXTENDED WARRANTY PLAN AND SERVICE CONTRACT
INTEGRATED LISTENING SYSTEMS EXTENDED WARRANTY PLAN AND SERVICE CONTRACT 12- AND 24-MONTH PLANS How Consumer Rights Affect This Plan FOR CONSUMERS IN JURUSDICTIONS WHO HAVE THE BENEFIT OF CONSUMER PROTECTION
More informationDell s NBD Service incorporates the following standard support services plus on-site engineer support if necessary:
Dell s Next Business Day On-site Service Description ( NBD Service ) I. NBD Service Overview Next Business Day On-site Service includes, from the date of delivery, a support service designed to assist
More informationModule 1 - Hardware Acquisition and Installation TABLE OF CONTENTS. Version 3.0
1 Module 1 - Hardware Acquisition and Installation TABLE OF CONTENTS Version 3.0 1. AGREED TERMS AND INTERPRETATION... 2 2. SUPPLY OF HARDWARE... 2 3. ACQUISITION THROUGH A RESELLER... 4 4. AVAILABILITY
More informationSELLING TERMS AND CONDITIONS
SELLING TERMS AND CONDITIONS 1. The Agreement. All sales by Sterling Machinery, Inc., an Arkansas corporation (the Seller ) to the purchaser of Seller s Goods (the Buyer ) shall be governed by the following
More informationDeclaration of Conformity EMC Directive 89/336/EEC Manufacturer s Name: Manufacturer s Address: Moore Industries-International, Inc. 16650 Schoenborn Street North Hills, CA 91343-6196 USA Declares that
More informationNETGEAR Onsite Hardware Replacement Service Agreement Terms and Conditions
NETGEAR Onsite Hardware Replacement Service Agreement Terms and Conditions 1. Support Services: Subject to the terms and conditions of this Service Agreement (the Agreement ), NETGEAR, Inc. ( NETGEAR ),
More informationUK Order, Service & Delivery Guidelines
UK Order, Service & Delivery Guidelines Helping us to provide you with the service you expect from Apollo UK Order, Service & Delivery Guidelines Contents Getting your Order Right Page 3 Ordering Page
More information3D Printing Systems Extended Warranty Terms and Conditions
3D Printing Systems Extended Warranty Terms and Conditions This warranty is valid only for the Australian and New Zealand customers. In these terms and conditions We refer to the issuer of Your 3D Printing
More informationJigsaw24 Support Contract Terms & Conditions
Version 1.1 Jigsaw24 Support Contract Terms & Conditions These conditions together with the provisions of the Agreement or a Scope of Work (SOW) are the only contractual terms upon which Jigsaw Systems
More informationTERMS AND CONDITIONS
TERMS AND CONDITIONS 1. Definitions. Buyer means the person, corporation or other entity purchasing Products from Seller. Products means all goods and materials to be provided pursuant to this Sales Acknowledgment.
More informationExtended Service Plan Agreement
Extended Service Plan Agreement 1. The Plan. This service contract governs the hardware services and technical support provided to you by Channel Master under the above- mentioned plans (each referred
More informationDevice Protection Plan Terms & Conditions
Fee Schedule. Device Protection Plan Terms & Conditions The Device Protection Plan is offered by ROGERS to both individual customers and enterprise customers. See your device protection kit (i.e. welcome
More informationc LIMITED COMPANY CREDIT APPLICATION FORM
c LIMITED COMPANY CREDIT APPLICATION FORM PLEASE ENCLOSE A SAMPLE COMPANY LETTER HEAD SKYLINE REF: WEB Tel: 020 8571 6128 www.skylineroofing.co.uk Company Name: Trading Name: (if different) Email address:
More informationWARRANTY CERTIFICATE
Effective Date WARRANTY CERTIFICATE EXTENDED LIMITED WARRANTY APsystems YC250, YC500 & YC1000 Microinverter Extension to 25 Years All APsystems YC250, YC500 & YC1000 Microinverters are covered by a 10
More informationHow To Sell A Computer To A Buyer
Standard Conditions of Sale 1.) Orders The terms and conditions for sale, delivery and payment as stipulated below apply exclusively to all deliveries to the Buyer made by the Seller. If the Buyer s order
More informationPURCHASE ORDER ACKNOWLEGMENT AND TERMS AND CONDITIONS
PURCHASE ORDER ACKNOWLEGMENT AND TERMS AND CONDITIONS 1. REJECTION OF ORDERS WITH CONTRADICTORY TERMS-All orders submitted by a buyer are subject to approval by an officer or other authorized official
More informationPRODUCT SUPPORT AND SOFTWARE MAINTENANCE AGREEMENT
PRODUCT SUPPORT AND SOFTWARE MAINTENANCE AGREEMENT This Product Support and Software Maintenance Agreement ( Support Agreement ) is between Gigamon Inc. ( Gigamon ) and customer ( Customer ) for the support
More informationd3technologies.com d3 4U v2.5 GETTING STARTED GUIDE
d3technologies.com d3 4U v2.5 GETTING STARTED GUIDE Index INDEX P 02 WELCOME P 03 WHAT S IN THE BOX? P 04 ACCESSORIES P 05 CABLES P 06 FIRST TIME SETUP P 07 MULTI-MACHINE SETUP P 08 d3 SUPPORT & TRAINING
More informationMaster Agreement Applicable to System Integration Services Furnished By KDDI America, Inc.
Master Agreement Applicable to System Integration Services Furnished By KDDI America, Inc. Page 1 of 9 THIS MASTER AGREEMENT FOR SYSTEM INTEGRATION SERVICE (the Agreement ) is made by and between KDDI
More informationFlexPlan Extended Warranty Service for Entegra & Release 9 Equipped Aircraft
FlexPlan Extended Warranty Service for Entegra & Release 9 Equipped Aircraft Introducing FlexPlan Extended Warranty Service Avidyne is committed to supporting its products for the long term and over the
More informationGeneral Terms and Conditions LEICA MICROSYSTEMS PTY LTD ACN 078 483 459 ABN 63 078 483 459 Unit 3, 112-118 Talavera Road North Ryde NSW 2113 Australia
General Terms and Conditions LEICA MICROSYSTEMS PTY LTD ACN 078 483 459 ABN 63 078 483 459 Unit 3, 112-118 Talavera Road North Ryde NSW 2113 Australia 1. Scope 1.1. All products are sold and Maintenance
More informationEPSON CoverPlus Conditions
EPSON CoverPlus Conditions 1. Definitions In these conditions : Registration is the process on the EPSON CoverPlus registration website by which, you input the activation number as purchased by (or otherwise
More informationPanini Maintenance Program My Vision X STANDARD WARRANTY-
Panini Maintenance Program My Vision X STANDARD WARRANTY- Panini warrants, to its customers, its authorized Resellers customers, and no others, that all My Vision X Branch Image Scanners ( My Vision X
More informationThese terms and conditions apply in addition to the standard warranty terms and conditions and shall always prevail in case of conflict.
data recovery service I for toshiba laptops Toshiba Data Recovery Service for Toshiba Laptops English SERVICE TERMS AND CONDITIONS 1 EN deutsch Mustertext XY Faccum ipis alisim consectem 3 DE EspaÑol Mustertext
More informationDell s European Collect and Return Service Description ( CAR Service )
Dell s European Collect and Return Service Description ( CAR Service ) I. CAR Service Overview European Collect and Return Service includes, from the date of delivery, a support service designed to assist
More informationService Policies for North America Bosch Security Systems
Service Policies for North America Bosch Security Systems 2 I Service Policies Service Policies I 3 Contents 1 Introduction 4 2 Overview of our service highlights 5 3 Key repair and exchange information
More informationROUSH PERFORMANCE - Limited Warranty
ROUSH PERFORMANCE - Limited Warranty ROUSH PARTS AND ACCESSORIES* WHO IS COVERED ROUSH's warranty obligations for ROUSH Parts and Accessories (individually and collectively Part(s) ) is limited to defects
More informationPay RIGHT AWAY Terms and Conditions
Pay RIGHT AWAY Terms and Conditions Pay RIGHT AWAY ( PRA ) is a mobile payments solution built, provisioned and managed by ingogo Limited ( ingogo ). PRA aims to improve businesses cash flow, streamline
More informationStatement of Work. Next Business Day LCD, Monitor & Television Exchange Service
Statement of Work Next Business Day LCD, Monitor & Television Exchange Service Next Business Day LCD, Monitor & Television Exchange Service Overview From the date of delivery, Next Business Day LCD, Monitor
More informationEquipment Maintenance Program Guide
www.tibco.com Equipment Maintenance Program Guide Global Headquarters 3307 Hillview Avenue Palo Alto, CA 94304 Tel: +1 650-846-1000 Toll Free: 1 800-420-8450 Fax: +1 650-846-1005 2015, TIBCO Software Inc.
More informationLIMITED WARRANTY. (i) repair the defective portion of the BlackBerry Device without charge to YOU with new or reconditioned parts;
LIMITED WARRANTY Additional Rights Under Consumer Laws. If YOU are a consumer YOU may have legal (statutory) rights that are in addition to those set out in this Limited Warranty (such as the consumer
More informationW.H. Software Maintenance and Technical Support Agreement
W.H. Software Maintenance and Technical Support Agreement 1. GENERAL TERMS 1.1. Definitions The following expressions shall have the following meanings: - "WHS" W.H Software Limited "Licensee" - the person,
More informationDolby Software Maintenance and Extended Warranty Policy for Select Cinema Products Revised as of August 1, 2013
Dolby Software Maintenance and Extended Warranty Policy for Select Cinema Products Revised as of August 1, 2013 Overview The Software Maintenance and Extended Warranty Policy applies only to the professional
More informationWIND Phone Protection Plan Terms and Conditions and Fee Schedule
WIND Phone Protection Plan Terms and Conditions and Fee Schedule The WIND Phone Protection Plan is offered by WIND Mobile as part of the following device support programs (which contain other support features
More informationWarranty Services Agreement
L505-0101-01 Warranty Services Agreement (November 2014) Page 1 of 4 Warranty Services Agreement Please read the following terms carefully. Lenovo (or a Lenovo Authorized Reseller) will provide services
More informationStandard and Extended Warranty Terms and Conditions Panasonic Computer Product Europe
Standard and Extended Warranty Terms and Conditions Panasonic Computer Product Europe Version 4.8 Table of Contents A. Introduction...3 A.1 Overview... 3 A.2 Goal... 3 A.3 Cardiff Service Centre Facilities
More informationASUS Warranty Information Form
ASUS Warranty Information Form Mr/Mrs./Ms/Miss: Telephone Number: Address: E-mail: Purchase Date: / / (DD/MM/YYYY) Dealer's Name: Dealer's Telephone Number: Dealer's Address: Serial Number Important: Please
More informationService Description XPS Next Business Day Onsite Service ( XPS NBD Service)
Service Description XPS Next Business Day Onsite Service ( XPS NBD Service) XPS NBD Service Overview XPS Next Business Day On-site Service includes, from the date of delivery, a support service designed
More informationCOMPLIANCE WITH LAWS, CODES, AND STANDARDS
All products furnished by Jinan Meide Casting Co. Ltd, shall be in accordance with the following terms and conditions unless otherwise agreed to in writing: ACCEPTANCE AND COMPLETE AGREEMENT Buyer s order
More informationSure Managed Networks Essential Level Support Service Terms & Conditions
Essential Level Support Service Description Sure s Support Service combines traditional maintenance and technical support services to support your Customer Premises Equipment. It enables enhanced service
More informationGeneral Terms and Conditions for Online Sales of TomTom Inc ( TomTom )
General Terms and Conditions for Online Sales of TomTom Inc ( TomTom ) 1) Scope a) These Terms and Conditions shall apply to all purchase orders submitted or to be submitted by you for any item, service
More informationSolarEdge Technologies Ltd.
SolarEdge Technologies Ltd. GENERAL TERMS AND CONDITIONS 1. General. This document, entitled General Terms and Conditions (referred to herein as the Agreement ), forms an integral part of the quotation
More informationExtended Warranty Cover
Extended Warranty Cover For increased protection at minimal cost To make a claim: Log onto www.nzclaim.com/thewarehouse or phone 0800 48 55 99 between 8.30am and 7.00pm Monday to Friday, excluding Public
More informationLimited Warranty Letter for BYD Photovoltaic Module
Limited Warranty Letter for BYD Photovoltaic Module BYD(Shangluo) Industrial Co., LTD ( BYD ) hereby provides this Limited Warranty ( Warranty ) with respect to certain types of its photovoltaic modules
More informationEPSON Preferred. Priority Technical Support. Toll-Free Phone Number. Security and Peace of Mind. On-Site Repair
EPSON Preferred SM Limited Warranty Program for the Epson Stylus Pro 24- and 44-inch Wide Format Printers Priority Technical Support Toll-Free Phone Number Security and Peace of Mind On-Site Repair CPD-24359
More informationQuick Installation Guide TK-209K TK-409K
Quick Installation Guide TK-209K TK-409K Table of of Contents Contents English... 1. Before You Start... 2. How to Connect... 3. Operation... 1 1 2 4 Troubleshooting... 5 Version 09.07.2006 1. Before You
More informationSell online - Terms and Conditions
Sell online - Terms and Conditions These terms and conditions ("Terms") govern the users ("you" or "your") use of the website ("Website") and your relationship with us (refer to the page Contact us for
More informationTelephone System Maintenance Information
Telephone System Maintenance Information Technical Maintenance & Telephone System Support from a trusted, local company 0800 849 4400 Telephone Engineer Group Telecom House, The Courtyard Gorsey Lane,
More informationFPO. LifeSize Assurance Maintenance Services. Description of Services. Table of Contents. LifeSize Assurance Maintenance Services 2
LifeSize Assurance Maintenance Services Description of Services FPO Table of Contents LifeSize Assurance Maintenance Services 2 Overview of LifeSize Limited Warranty 3 Customer Support Services 4-5 Software
More informationGENERAL CABLE COMPANY LTD. TERMS AND CONDITIONS OF SALE (Canada)
GENERAL CABLE COMPANY LTD. TERMS AND CONDITIONS OF SALE (Canada) 1. ACCEPTANCE. This is an offer for General Cable Company Ltd. ( Seller ) to sell the product(s) ( Goods ) offered by it to the party to
More information3800 Linear Series. Quick Start Guide
3800 Linear Series Quick Start Guide Note: Refer to your user s guide for information about cleaning your device. For localized language versions of this document, go to www.honeywell.com/aidc. Getting
More informationTerms & Conditions Verder B.V. (02031806) Filed at the Chamber of Commerce on 29-01-2015
Terms & Conditions Verder B.V. (02031806) Filed at the Chamber of Commerce on 29-01-2015 1. General 1.1 These terms and conditions use the following terms and definitions: Product: items, as well as services
More informationDICK DOES. Extended Warranty Cover. 405515_AU_Extended_Warranty_DL.indd 1
DICK DOES Extended Warranty Cover 405515_AU_Extended_Warranty_DL.indd 1 Key Features of Dick Smith Extended Warranty Congratulations on your new purchase. We are pleased that you have elected to protect
More information