1 Windows Vista: Connecting to the wireless network at Hood College Please ensure your computer meets the following criteria in order to successfully make a connection to this network: n capable Network Adapter Latest manufacturer drivers for the Network Adapter Step 1: Right click the Network menu item in the start menu and select Properties. Alternatively you can also right click on the network icon in the applications tray and select Network and Sharing Center or click on the Wireless networks are available bubble that appears in the same application tray area.
2 *If you don't see Network menu item please do the following: Click Start, click Control Panel, then select under the Network and Internet icon the link for View network status and tasks. Select under the Network and Internet icon the link for View network status and tasks.
3 Step 2: Click the Manage network connections link. Step 3: Right click your Wireless Network Connection icon and Enable your wireless radio if it is turned off, then right click the Wireless Network Connection icon again and select Properties.
4 Step 4: Under the General or Networking tab, click on Internet Protocol Version 4 (TCP/IPv4) and select Properties.
5 Step 5: In the window that opens, Select Obtain an IP address automatically. Also select Obtain DNS server address automatically. Click the Advanced button. Select and remove all WINS addresses (if any) from the WINS address in order of use box. Select the Default radio button (Use NetBIOS settings from the DHCP server) in the NetBIOS Setting section, click OK or Close. Close the remaining open windows by clicking OK or Close.
6 Step 6: Go to the Network and Sharing Center and select Manage wireless networks from the choices on the left.
7 Step 7: From the Manage wireless networks screen, choose the Add option. Step 8: Select the Manually create a network profile option:
8 Step 9: Enter in the following information (information is case sensitive) to the fileds listed below and then click on the Next button to continue. Network Name: Security Type: Encryption type: WPA2-Enterprise AES
10 Step 11: Under the Connection tab, verify that Connect automatically when this network is in range is selected. Select the Security tab and under Choose a network authentication method, verify that the Protected EAP (PEAP) is selected and that the Remember my credentials for this connection each time I m logged on box is selected. Select the Settings button next. Wireless Network Properties Wireless Network Properties
11 Step 12: On the Protected EAP Properties window, uncheck the Validate server certificate box and select the Enable Fast Reconnect box under Select Authentication Method area. Additionally select the Configure button for Secured password (EAP-MSCHAP v2) and uncheck the box in the window that reads Automatically use my Windows logon name and password (and domain if any). Click on the OK buttons to close and save your settings. Click on the Advanced settings button and under the 802.1X settings tab select the check box for Specify authentication mode and select User or computer authentication. Click OK and then OK again. Wireless Network Porperties
12 Step 13: Locate from the network icon in the applications tray and check the Connect automatically check box and then click Connect
13 Step 14: A popup window will appear once connected to Click on the popup window to authenticate. Additional information is needed to connect to Enter in your Pergola account credentials as supplied by the college then click on OK. A screen indicating that you have successfully connected to will appear next. Connecting to
NF3ADV VoIP Setup Guide (for TPG) Configuring your NF3ADV for TPG VoIP The following steps will take you through the process of setting up your VoIP connection. This guide assumes that the NF3ADV already
NF1Adv VOIP Setup Guide (for Pennytel) Configuring your NF1Adv for VOIP Service The following steps will take you through the process of setting up your VOIP connection. Step 1: Checking Computer Network
INTRODUCTION... 2 Windows 7... 2 Windows 8... 7 Mac OS X... 11 Ubuntu... 15 Advanced routing... 18 Windows... 18 Mac OS X... 18 Ubuntu... 18 Updated: Juha Jokinen Page (1/18) INTRODUCTION This is a guide
1. How to check if a network card is installed Locate the My Computer icon, found either on the Start menu or the desktop Right click on the My Computer icon and select Properties from the grey box that
Windows 2003 / Enhanced Configuring Internet Authentication Service on Microsoft Windows 2003 Server Introduction This technote describes how to setup the Internet Authentication service (IAS) on a Microsoft
POWER A/C Adapter 4 3 2 1 PHONE 2 PHONE 1 LINE 2.0 Setup Network 2.1 Click on the Start button on the bottom left hand corner, and then choose Control Panel. ZyXEL VoIP 2602HWL - Setup guide Contents 1.
ZHAW Wireless LAN Operating system: Windows 7 How to connect your mobile device to the ZHAW Wireless LAN (WLAN). Configuring the ZHAW WLAN. Page Connecting to the ZHAW WLAN. Page 8 Connecting to the ZHAW
AKOYA INSTALLATION TECHNICAL REQUIREMENTS INTERNET EXPLORER CONFIGURATION FOR AKOYA.NET 1. TURN OFF UAC SETTINGS Before making the following changes in Internet Explorer, you must be a local administrator
Using Web Services for scanning on your network (Windows Vista SP2 or greater, Windows 7 and Windows 8) The Web Services protocol allows Windows Vista (SP2 or greater), Windows 7 and Windows 8 users to
Diamond II v2.3 Service Pack 4 Installation Manual P/N 460987001B ISS 26APR11 Copyright Disclaimer Trademarks and patents Intended use Software license agreement FCC compliance Certification and compliance
This guide provides step by step instructions for using the IMF elibrary Data - area. In this guide, you ll learn how to: Access your favorite and recently used data reports. Make sure you receive email
Enabling Integrated Windows Authentication For CitectSCADA Web Client Applies To: CitectSCADA 6.xx and 7.xx VijeoCitect 6.xx and 7.xx Summary: What is the difference between Basic Authentication and Windows
Acronis Backup & Recovery 11 Quick Start Guide Applies to the following editions: Advanced Server Virtual Edition Advanced Server SBS Edition Advanced Workstation Server for Linux Server for Windows Workstation
FLX VoIP Registering with Cisco UCM Date: May 15 th, 2012 This technical note gives a detailed description on how to register a Revolabs FLX conference phone with a Cisco Unified Communications Manager
Technology Business Solutions Online Backup Manager 1. Go to the TBS OBM Software Registration Page Click the TBS Logo Under the select an account type choose the PRO version. Page1 of7 2.) Create a new
This guide is intended to help you troubleshoot problems connecting a wireless device to the Gogo Biz network. TABLE OF CONTENTS Windows Operating System... 3 Blackberry... 5 Android... 6 Apple Macbook...
Outlook E-Mail Step 1: Open and Configure Outlook 1. Click the Microsoft Button in the lower left task bar 2. Select All Programs 3. Select Microsoft Office 4. Select Microsoft Outlook 5. Follow the Start
Improving the lives of women and girls through programs leading to social and economic empowerment. SOROPTIMIST INTERNATIONAL OF THE AMERICAS Guide to Migrating Your Outlook.com Club Email & Contacts to
Chapter 6 Using Network Monitoring Tools This chapter describes how to use the maintenance features of your RangeMax Dual Band Wireless-N Router WNDR3300. You can access these features by selecting the
COX BUSINESS ONLINE BACKUP Quick start Guide www.cox.com Services and features not available in all areas and package options vary by market. Rates and speeds vary by market. Number of users and network
Migrating From Bobcat Mail To Google Apps (Using Microsoft Outlook and Google Apps Sync) This document is intended for those users moving from WVWC s Bobcat Mail system to the new Google Apps mail system
NEFSIS TRAINING SERIES Nefsis Dedicated Server version 5.2.0.XXX (DRAFT Document) Requirements and Implementation Guide (Rev5-113009) REQUIREMENTS AND INSTALLATION OF THE NEFSIS DEDICATED SERVER Nefsis
USER CONFERENCE 2011 SAN FRANCISCO APRIL 26 29 Running MarkLogic in the Cloud DEVELOPER LOUNGE LAB Table of Contents UNIT 1: Lab description... 3 Pre-requisites:... 3 UNIT 2: Launching an instance on EC2...