Committing to the future. Everything under control: With testo Saveris TM, measurement data are under control everywhere.

Transcription

1 Committing to the future Everything under control: With testo Saveris TM, measurement data are under control everywhere.

2 Unlimited data monitoring. Whether stationary or mobile. The data monitoring system testo Saveris measures the temperature and humidity values of sensitive goods and products in the environment, in processes and during transport. The easy-to-use measurement system delivers safety and savings in time and costs thanks to automated measurement data recording. In stationary operation, the transfer of the measurement data takes place via wireless and/or Ethernet connection to a base station. This documents and monitors all measurement data. If limit values are exceeded, a whole range of different alarm options, such as SMS/ alarm or alarm relay is available. Remote alarms can even be given when the system is not connected to a running PC. 2

3 If measurement parameters are documented during transport, the driver receives all necessary information and alarms from a Cockpit Unit in the driver s cabin. Documentation and monitoring takes place via wireless probes, the timeconsuming installation of wired sensors in the truck is unnecessary. At the same time, the possibility of printing out measurement values at the handover of goods, using an infrared printer, also exists. All data recorded, whether stationary or on the road, are centrally stored in a software. At the same time, Saveris allows the comprehensive analysis and evaluation of all recorded measurement data. With testo Saveris, all measurement data are under control, whether stationary or on the road. 3

4 Overview of application areas Monitoring of processes in the pharmaceutical industry In the pharmaceutical industry, high demands are placed on the recording and monitoring of quality parameters. Constant documentation during the production, storage and transportation of temperature-sensitive products such as medicines, blood products or cell cultures has long been considered an absolute must. testo Saveris automates the central documentation of measurement data as well as the safe monitoring of refrigerated and deep-freeze rooms, incubators and climate cabinets. At the same time, the system allows the uninterrupted recording of measurement data, even during the transport of temperature or humidity-critical products such as medicaments or vaccines. This means testo Saveris offers the optimum control of production and storage, via transport, up to delivery. The comprehensive alarm management allows fast alarming if limit values are violated. Thanks to a combination of wireless and/or Ethernet probes, the system is optimum for many different applications in the pharmaceutical industry. It goes without saying that the data monitoring system testo Saveris meets the requirements of 21 CFR Part 11. 4

5 Monitoring of the building climate When monitoring the building climate, stable ambient conditions are especially necessary in museums and archives in order to protect sensitive and expensive objects. During transportation, valuable goods must be constantly monitored. testo Saveris automates the central recording of all climate data, stationary as well as during transport. By issuing alarms when limit values are exceeded, testo Saveris protects valuable inventory from undesired temperature or humidity influences at all times. The radio probe can be flexibly attached to locations without the effort of routing cables. Monitoring of processes in research and development, laboratories and hospitals Research and development areas as well as laboratories and hospitals are responsible for the recording of ambient and process data in order to monitor sensitive products or machines. However, the monitoring of temperature and humidity-critical goods during transport is also crucial for a high standard of quality. testo Saveris carries out the central documentation of the measurement series, for stationary as well as for transport applications. testo Saveris thus guarantees the simple and ure monitoring of climate and process data in air conditioning chambers, refrigerators, drying chambers, test benches or blood banks. If critical values are to be monitored during transport, testo Saveris offers the optimum solution. 5

6 Overview of application areas Monitoring the foodstuff cooling chain Compliance with predefined temperature values is a decisive factor for quality in food production and is important for complying with legal hygiene standards. However, the decisive factor is the uninterrupted monitoring of the cold chain during production, storage, and above all, during transport. Only this uninterrupted monitoring provides a final guarantee that the quality and freshness of the products can be certified. testo Saveris automates not only the monitoring of the ambient and production temperatures during production and storage, but also of defined temperature limit values during transport. The installation of wireless probes in delivery vehicles makes the complicated wiring of the driver s cabin unnecessary. Alarms are issued whenever the limit values are exceeded. The measurement data from stationary and transport applications are saved centrally in a database and are accessible at any time. All measurement values are under control! testo Saveris conforms to the EN standard. 6

7 Monitoring in production, transport and storage in industry In industry, a number of quality data must be recorded and monitored in the production, storage and transport of products. testo Saveris automates the documentation of these data and alarms when limit values are exceeded. Products and processes are thus guaranteed at a high level of quality. testo Saveris is ideal for use in the monitoring and documentation of ambient and temperature data in production areas, storerooms, refrigerators and climate cabinets. At the same time, testo Saveris allows the uninterrupted recording of measurement parameters during the transport of sensitive products. The most varied applications, stationary as well as in transport, are optimally covered by testo Saveris radio probes and/or Ethernet probes. 7

8 testo Saveris system overview Data monitoring for uninterrupted checks testo Saveris TM wireless probe Probe versions with internal and external temperature and humidity sensors allow the adaptation to every application. The radio probes are available with or without a display as an option. Current measurement data, the battery status and the quality of the radio link are shown on the display. testo Saveris TM router The radio link can be improved or lengthened in poor structural conditions by using a router. Several routers can of course be used in the testo Saveris system. At the same time, the serial switching of up to 3 routers V 2.0 offers highest flexibility in the wireless range. testo Saveris TM converter Through the connection of a converter to an Ethernet jack, the signal of a radio probe can be converted into an Ethernet signal. This combines the flexible connection of the radio probe with the use of the existing Ethernet even over long transmission paths. testo Saveris TM router V 2.0 testo Saveris TM converter V 2.0 Ethernet testo Saveris TM wireless probe testo Saveris TM analog coupler (Ethernet) testo Saveris TM analog coupler (wireless) Humidity transmitters testo Saveris radio probe testo Saveris Ethernet probe testo Saveris TM analog coupler The two versions of the analog coupler (wireless / Ethernet) allow the inclusion of other measurement parameters into the testo Saveris monitoring system, by integrating all measurement transmitters with standarized current/voltage interfaces, e. g. 4 to 20 ma or 0 to 10 V. Humidity transmitters testo 6651/6681/6351/6381 The two versions of the analog coupler (wireless / Ethernet) allow the inclusion of other measurement parameters into the testo Saveris monitoring system, by integrating all measurement transmitters with standarized current/voltage interfaces, e. g. 4 to 20 ma or 0 to 10 V. 8

9 testo Saveris TM Base The base is the heart of testo Saveris and can save 40,000 readings per measurement channel independently of the PC. This corresponds to around one year of memory capacity at a measuring rate of 15 minutes. The system data and alarms are visible via the display of the Saveris base. testo Saveris TM software The testo Saveris software offers simple operation and an intuitive user interface. The Saveris software is available in three different versions: as the basic version SBE (Small Business Edition), the PROF (Professional) software version with diverse additional options, or as the CFR version. The CFR software fulfils the requirements of the FDA s 21 CFR Part 11 and is thus validatable. Ethernet USB or Ethernet testo Saveris TM Software testo Saveris TM Base Ethernet testo Saveris TM Control unit testo Saveris TM Ethernet probe Control unit testo Saveris TM Ethernet probe In addition to the radio probes, probes can be used that are directly connected to the Ethernet. The existing LAN infrastructure can be used through this. This allows the data transfer from the probe to the base, even over long distances. testo Saveris TM extender By connecting a Saveris Extender, the wireless signal of a transport probe is converted into an Ethernet signal. The data transfer from wireless probe to Extender takes place automatically when sufficient wireless connection is present. testo Saveris TM Cockpit Unit The Saveris Cockpit Unit displays all measurement values to the driver uninterruptedly during transport. If limit values are violated, the driver is immediately warned. Alternatively, the complete data recording can be printed out at the handover site of the goods using the Testo printer on the Cockpit Unit. 9

10 testo Saveris software 1 Installation made easy Connect Saveris base to mains. The probes can now be logged on at the base: They are switched on in series and automatically identified by the base. The Saveris base is connected to the PC via USB or Ethernet. The software is installed on the PC with help from the installation wizard. The system is ready for configuration: Probe name, limit values, measuring cycles and alarms can be adapted to the individual measuring tasks. 2 Clear and always up-to-date The measurement data can always be shown as a graphic or table. Various probes can be compiled into groups. Logical units by measurement task are thus formed. The measurement data view over days, weeks or months is freely definable. The integrated calendar offers practical assistance here. Daily report Cold storage house zone: Hourly mean values on Time C freezer 1 %RH cold room 1 C refrigerator C drinks C freezer 2 C freezer 3 C freezer 4 3 Automated documentation Form and time of the reporting are predefined once. The creation and saving of reports as a PDF file now takes place automatically in accordance with the set conditions. The files are therefore ready to be printed at any time. Total maximum value Total mean value Total minimum value 10

11 Small Business Edition (SBE), Professional (PROF) and CFR version Now more flexible with Professional software 4 The PROF (Professional) software version offers interesting additional functions beyond the attractive standard functions of the basic version SBE, e.g.: Client-server concept: The measurement data can be monitored by various PCs integrated into the network. Photographs of machines or rooms can be saved as a picture. The respective measurement values are shown directly at the position of the probe in the room or at the machine in these. The link between the location and the measurement value is thus very easily visualized (fig. 4). A comprehensive alarm management offers the option of alarming more than two people at the same time or in succession. Depending on the day of the week or the time, it is possible to choose whether the alarm is given as an or an SMS. Tour planning with calendar management allows a clear presentation of planned and completed transports. 21 C 48 %RH 41 C 22 %RH 26 C 38 %RH Validatable CFR software 5 The CFR software fulfils the requirements of the FDA s 21 CFR Part 11 and is thus validatable. Overview of software features SBE PROF CFR Diagrams / tables / Alarm overview / PDF reports Calendar management Presentation of probe groups Alarm dispatch ( , SMS, relay) Comprehensive alarm management in stationary operation Automated update of measurement data ( Online mode ) in stationary operation Measurement data on background photo of measruement sites Integration in network (client-server) Tour planning with calendar management Allocation of access rights for stationary and mobile probe groups Search function for tours Configuration of print text Diagrams / tables with identification of start and stop of tour 21 CFR Part 11 compliant (validatable) Electronic signature Audit trail Allocation of access rights on 3 user levels SBE software, incl. USB connecting cable base-pc PROF software, incl. USB connecting cable base-pc Overview of application areas Saveris software Stationary operation Mobile operation Stationary and mobile operation SBE PROF CFR CFR software, incl. Ethernet connecting cable base-pc

12 testo Saveris Base The base is the heart of testo Saveris and can save 40,000 readings per measurement channel independently of the PC. The system data and alarms are visible via the display of the Saveris base. Display for showing alarms and system data Large data memory Issue of alarms via LED/relay SMS alarm (optional) Emergency battery integrated Up to 150 probes can be connected Connection option via USB or Ethernet Technical data Ordering data Memory Dimensions Weight Protection class Housing material Radio frequency Power supply (absolutely necessary) Rech. batt. Oper. temp. Storage temp. Display Interfaces Connectable radio probe Alarm relay GSM module Set up 40,000 values per channel (total max values) 225 x 150 x 49 mm approx g IP42 Die-cast zinc/plastic 868 MHz 6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw terminals, power consumption 4 W Li-ion battery (for data back-up and for emergency SMS with failure of the power supply) -10 to +50 C -40 to +60 C graphical display, 4 control keys USB, radio, Ethernet max. 15 probes can be directly connected via radio interface, max. 150 total via radio / Router / Converter / Ethernet / Extender max. 450 channels max. 1 A, max. 30 W, max. 60/25 V DC/AC, NC or NO contact 850/900/1800/1900 MHz not valid for Japan and South Korea Table base and wall bracket included 868 MHz Saveris base, radio frequency 868 MHz Note on the radio frequencies 868 MHz 868 MHz: EU countries and certain other countries (e.g. CH, CN, NOR) Country list at Saveris base, radio frequency 868 MHz, GSM module integrated (for SMS alarm) No mains units or antennas with magnetic base are contained in this ordering data. 12

13 testo Saveris Cockpit Unit The Saveris Cockpit Unit displays all measurement values to the driver without interruption during transport. If limit values are violated, the driver is immediately warned. Alternatively, the complete data recording can be printed out at the handover site of the goods using an infrared printer on the Cockpit Unit. Display for showing alarms and system data Large data memory Alarms via LED Printout of readings using infrared printer Emergency battery integrated Up to 8 probes can be connected Wireless, USB and infrared interfaces Technical data Ordering data Memory Dimensions Weight Protection class Housing material Radio frequency Power supply (absolutely necessary) Oper. temp. Storage temp. Display Interfaces Connectable radio probe Attachment max readings approx. 150 x 90x 40 mm approx. 210 g IP40 Plastic 868 MHz Mini USB cable incl. adapter 12/24 V DC -30 to +65 C -40 to +85 C graphical display, 4 control keys Wireless, USB, infrared up to 2 zones of 4 wireless probes each. max. 32 channels Sucker pad with telescope function 868 MHz Saveris Cockpit Unit

14 testo Saveris components: Router, Converter and Extender The radio link can be improved or lengthened in poor structural conditions by using a router. Several routers can of course be used in the testo Saveris system. At the same time, the serial switching of up to 3 routers V 2.0 offers highest flexibility in the wireless range. Through the connection of a converter to an Ethernet jack, the signal of a radio probe can be converted into an Ethernet signal. This combines the flexible connection of the radio probe with the use of the existing Ethernet even over long transmission paths. By connecting an Extender, the wireless signal of a transport probe is converted into an Ethernet signal. The data transfer from probe to Extender takes place automatically when sufficient wireless connection is present. Radio Radio Radio Radio Radio Ethernet Ethernet Ethernet Saveris Router V 1.0 Saveris Router V 2.0 Saveris Converter V 1.0 Saveris Converter V 2.0 Saveris Extender Use for Saveris Base Firmware Version V 1.X for Saveris Base Firmware Version V 2.X for Saveris Base Firmware Version V 1.X for all Saveris Base Firmware versions for wireless probes with Firmware Version V 2.X for Saveris Base Firmware Version V 2.X Dimensions Weight Power supply approx. 180 g 6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw terminals, power consumption approx. 85 x 100 x 38 mm approx. 190 g 6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw terminals, PoE, power consumption Oper. temp. Storage temp. Housing material Protection class Interfaces Connectable radio probe Router cascading Wall holder -20 to +50 C -40 to +60 C Plastic IP54 Radio Radio, Ethernet max. 5 max. 15 max. 100 No Yes included 868 MHz Versions Saveris router, V 1.0,868 MHz, radio transmission medium Saveris router, V 2.0,868 MHz, radio transmission medium Saveris Cverter V 1.0, 868 MHz, converts the radio transmission medium to Ethernet Saveris Cverter V 2.0, 868 MHz, converts the radio transmission medium to Ethernet Saveris Extender 868 MHz, converts the radio transmission medium to Ethernet No mains units are contained in this ordering data. 14

15 testo Saveris : Accessories Power supply Spare batteries for radio probes (4 x AA alkali manganese mignon batteries) Spare batteries for radio probes for operation below -10 C (4 x Energizer L91 Photo lithium) International mains unit V AC / 6.3 V DC; for mains operation or battery charging in intrument Mains unit (top-hat rail mounting) 90 to 264 VAC / 24 VDC (2.5 A) Mains unit (desktop) 110 to 240 VAC / 24 VDC (350 ma) Miscellaneous 1 Magnetic foot aerial (dual band) with 3 m cable, for Base with GSM module (not suitable for USA, Canada, Chile, Argentina, Mexico) 2 Antenna with magnetic foot (quad band) for Base with GSM module Alarm module (optical + audible), connectable to Base alarm relay, Ø 70 x 164 mm, 24 V AC/DC / 320 ma, permanent light: rot, permanent tone: buzzer approx. 2.4 khz (mains unit required) ID-No /1 1 Magnetic foot aerial (dual band) 2 Programming adapter (from Mini DIN to USB) for Ethernet probes, Converters and Extenders (necessary if no DHCP server available) Saveris protective housing for protection from high-pressure cleaning and impact, IP 69 K suitable for wireless probes T1 / T1D / T2 / T2D Testo fast printer with wireless infrared interface, 1 roll of thermal paper and 4 mignon batteries for printing out readings out on Saveris Cockpit Unit Alarm module (visual + acoustic), can be connected to base alarm relay Software SBE software, incl. USB connecting cable base-pc PROF software, incl. USB connecting cable base-pc CFR software, incl. Ethernet connecting cable base-pc Saveris adjustment software incl. connection cable to wireless and Ethernet probes Calibration certificates ISO temperature calibration certificate; temperature probe; calibration points -8 C, 0 C, +40 C; per channel/instrument (suitable for Saveris T1/T2) ISO temperature calibration certificate; temperature probe; calibration points -18 C, 0 C, +60 C; per channel/instrument (suitable for Saveris T1/T2) DAkkS temperature calibration certificate*; temperature probe; calibration points -20 C, 0 C, +60 C; per channel/instrument (suitable for Saveris T1/T2) ISO humidity calibration certificate; humidity probe; calibration points 11.3 % RH and 75.3 % RH at +25 C/+77 F; per channel/instrument DAkkS humidity calibration certificate*; humidity probe; calibration points 11.3 % RH and 75.3 % RH at +25 C/+77 F; per channel/instrument *Successor organization of the DKD Saveris protective housing 4 Testo fast printer 15

16 testo Saveris components: Radio probe Probe versions with internal and external temperature sensors and with humidity sensors allow the adaptation to every application. The radio probes are available with or without a display as an option. Current measurement data, the battery status and the quality of the radio link are shown on the display. internal 81 mm internal 81 mm C / F TC external 81 mm TC external 81 mm Pt 100 external Radio Probe type Saveris T1 Radio probe with internal Saveris T2 Radio probe with external probe connection and internal, door contact Saveris T3 2-channel radio probe with 2 external TC probe connections (TC characteristics can be selected) Saveris Pt Radio probe with 1 external Pt100 probe connection Internal sensor External probe Measuring range Accuracy Resolution Probe type Measuring range (instrument) Accuracy (instrument) Resolution (instrument) Connection -35 to +50 C ± 0.4 C (-25 to +50 C) ±0.8 C (remaining meas. range) 0.1 C -35 to +50 C ± 0.4 C (-25 to +50 C) ±0.8 C (remaining meas. range) 0.1 C -50 to +150 C ± 0.2 C (-25 to +70 C) ±0.4 C (remaining meas. range) 0.1 C via Mini DIN socket, Door contact connection cable included in delivery (1.80 m) TC Type K -195 to C TC type T TC Type J -100 to +750 C TC type S -200 to +400 C 0 to C ±0.5 C or 0.5% of reading) 0.1 C / TC Type S 1 C 2 TCs via TC socket, max. difference in potential 2 V Pt to +600 C at 25 C ± 0.1 C (0 to +60 C) ±0.2 C (-100 to +200 C) ±0.5 C (remaining meas. range) 0.01 C 1 Pt100 via mini-din socket Dimensions (housing): Weight Battery life (Type: 4 x AA) Housing material Protection class Radio frequency Meas. cycle Memory Conformity with standards Oper. temp. Storage temp. Display (optional) Transmission distance Wall holder 80 x 85 x 38 mm approx. 240 g Battery life 3 years at +25 C; 3 years with Energizer L91 Photo lithium batteries for freezer applications Plastic IP68 IP MHz / 2.4 GHz Standard 15 min, can be set from 1 min up to 24 h readings DIN EN to +50 C -20 to +50 C -40 to +55 C 2-line LCD; 7 segments with symbols approx. 300 m free field at a frequency of 868 MHz, approx. 100 m free field at a frequency of 2.4 GHz included IP68 Versions Version without display Saveris T * 868 MHz Version with display Saveris T1 D * Saveris T * Saveris T2 D * Saveris T * SaverisT3 D * Saveris Pt * Saveris Pt D * The AA alkali manganese mignon batteries ( ) are contained in this ordering data (excepting analog coupler). Saveris probes are delivered with a calibration protocol of the works adjustment data. Calibration certificates must be ordered separately. * The Saveris Converter V 2.0 (order no ) is required for integration of Saveris wireless probes into systems with Base firmware V 1.X For more information please contact your Testo partner. 16

17 testo Saveris components: Radio probe % RH C / F and %RH % RH % RH ma V ma and V external internal external internal Radio Saveris H2 D Humidity radio probe Saveris H3 Humidity radio probe Saveris H4 D Radio probe with 1 external humidity probe connection Saveris U1 Radio probe with current/voltage input Probe type Humidity sensor 1 channel: Current/voltage input Internal sensor Measuring range Accuracy -20 to +50 C ± 0.5 C %RH ±3 % RH 2-wire: ma 4-wire: 0/ ma, 0 to 1/5/10 V, load: max. 160 W at 24 V DC Current ±0.03 ma / 0.75 µa Voltage 0 to 1 V ±1.5 mv/39 µv Voltage 0 to 5 V ±7.5 mv / 0.17 mv Voltage 0 to 10 V ±15 mv / 0,34 mv ±0.02% of m.v./k deviating from nominal temperature 22 C External probe Resolution Probe type Meas. range (instrument) -20 to +50 C Accuracy (instrument) ± 0.5 C Humidity sensor 0 to +100 %RH ** to 90 %RH: ±2 % RH > 90 %RH: ±3 % RH 0.1 C 0.1 C / 0.1 Ctd -20 to +70 Humidity sensor 0 to +100 %RH ** ± 0.2 C see probes Resolution (instrument) Connection 0.1 C fixed stump probe 0,1%/0.1 Ctd 0.1 C 0,1%/0.1 Ctd 1 x external humidity probe Mini DIN socket 2/4-wire current/voltage input Service interface Mini DIN for adjustment Dimensions (housing): Weight Battery life (Type: 4 x AA) Housing material Protection class Radio frequency Meas. cycle Memory Oper. temp. Storage temp. Display (optional) Transmission distance Wall holder 85 x 100 x 38 mm approx. 256 g IP54 80 x 85 x 38 mm approx. 245 g Batery life 3 years at +25 C; 3 years with Energizer L91 Photo lithium batteries for freezer applications Plastic IP42 IP MHz / 2.4 GHz Standard 15 min, can be set from 1 min up to 24 h readings -20 to +50 C -40 to +55 C 2-line LCD; 7 segments with symbols approx. 300 m free field at a frequency of 868 MHz, approx. 100 m free field at a frequency of 2.4 GHz included approx. 85 x 100 x 38 mm approx. 240 g Supply: Mains unit 6.3 V DC, 2 to 30 V DC max. 25 V AC (no display) Versions Version without display 868 MHz Version with display Saveris H2 D * Saveris H * Saveris H3 D * Saveris H4 D * Saveris U * The AA alkali manganese mignon batteries ( ) are contained in this ordering data (excepting analog coupler). Saveris probes are delivered with a calibration protocol of the works adjustment data. Calibration certificates must be ordered separately. * The Saveris Converter V 2.0 (order no ) is required for integration of Saveris wireless probes into systems with Base firmware V 1.X For more information please contact your Testo partner. ** not for continuous high-humidity applications 17

18 testo Saveris components: Ethernet probes The existing LAN infrastructure can be used through the Ethernet probe. This allows the data transfer from the probe to the base, even over long distances. Ethernet probes have a display. external TC external C Pt 100 external Ethernet Saveris T1 E Saveris T4 E Saveris Pt E Ethernet probe with external probe connection 4-channel Ethernet probe with 4 external TC probe connections Ethernet probe with external Pt100 probe connection External probe Probe type Measuring range (instrument) Accuracy (instrument) Resolution (instrument) Connection Dimensions (housing): Weight Supply -50 to +150 C ± 0.2 C (-25 to +70 C) ±0.4 C (remaining meas. range) 0.1 C 1 via mini-din socket TC Type K TC Type J -195 to C -100 to +750 C TC type T TC type S -200 to +400 C 0 to C ±0.5 C or 0.5% of reading) 0.1 C / TC Type S 1 C 4 TCs via TC socket max. potential difference 50 V Pt to +600 C Mini-DIN service interface for adjustment is accessible externally approx. 85 x 100 x 38 mm approx. 220 g 6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw terminals, PoE Buffer battery Housing material Li-ion Plastic Protection class IP54 Meas. cycle 2 to 24 h Memory 6000 readings Oper. temp. -20 to +60 C Storage temp. -40 to +60 C Power consumption PoE Class 0 (typically 3 W) Display (optional) 2-line LCD; 7 segments with symbols Wall holder included Versions Saveris T1 E Saveris T4 E With display With display at 25 C ± 0.1 C (0 to +60 C) ±0.2 C (-100 to +200 C) ±0.5 C (remaining meas. range) 0.01 C 1 Pt100 via mini-din socket Saveris Pt E With display Saveris probes are delivered with a calibration protocol of the works adjustment data. Calibration certificates must be ordered separately. Mains units are not included in delivery. 18

19 testo Saveris components: Ethernet probes % RH % RH C / F and %RH % RH ma V ma and V external external external internal Ethernet Saveris H1 E Saveris H2 E Saveris H4 E Saveris U1 E Humidity Ethernet probe 1% Humidity Ethernet probe 2 % Ethernet probe with external humidity probe connection Radio probe with current/voltage input Internal sensor External probe Probe type Measuring range Accuracy Probe type Measuring range (instrument) Accuracy (instrument) Resolution (instrument) Connection Dimensions (housing): Weight Supply Buffer battery Housing material Protection class Meas. cycle Memory -20 to +70 ± 0.2 C (0 to +30 C) ±0.5 C (remaining meas. range) 0.1 C Humidity sensor 0 to 100 %RH* to 90 %RH: ±(1 %RH +0.7 % of m.v.) at +25 C > 90 %RH: ±(1.4 %RH +0.7 % of m.v.) at +25 C 0.1% / 0.1 Ctd -20 to +70 ± 0.2 C (0 to +30 C) ±0.5 C (remaining meas. range) 0.1 C Humidity sensor 0 to 100 %RH* to 90 %RH: ± 2 %RH > 90 %RH: ± 3 %RH -20 to +70 ± 0.2 C (-20 to +70 C) Humidity sensor 0 to 100 %RH* see external probes 0.1% / 0.1 Ctd 0.1 C 0.1%/0.1 Ctd 1 x external humidity probe Mini DIN socket Mini-DIN service interface for adjustment is accessible externally approx. 85 x 100 x 38 mm approx. 230 g approx. 254 g 6.3 V DC mains unit; alternatively via 24 V AC/DC plug-in/screw terminals, PoE Li-ion Plastic IP54 2 to 24 h readings Oper. temp. -20 to +60 C Storage temp. -40 to +60 C Power consumption PoE Class 0 (typically 3 W) Display (optional) 2-line LCD; 7 segments with symbols Wall holder included Versions Saveris H1 E Saveris H2 E Saveris H4 E With display With display With display channel: Current/voltage input 2-wire: ma 4-wire: 0/ ma, 0 to 1/5/10V, load: max. 160 W at 24 V DC Current ±0.03 ma / 0.75 µa Voltage 0 to 1 V ±1.5 mv / 39 µv Voltage 0 to 5 V ±7.5 mv / 0.17 mv Voltage 0 to 10 V ±15 mv / 0.34 mv ±0.02% of m.v./k deviating from nominal temperature 22 C 1 x 2/4-wire current/voltage input Saveris U1 E no display approx. 240 g no display Sintered caps for Saveris H1 E, H2 E and H2 D Ethernet probes Metal protective cap, Ø 12 mm for humidity probes, for measurement at flow velocities les than 10 m/s Stainless steel sintered filter, pore size 100 µm, sensor protection for dusty atmospheres or higher flow velocities, for measurement in high flow velocities or contaminated air Cap with wire fabric filter, Ø 12 mm Sintered PTFE filter, Ø 12 mm, for aggressive media, high-humidity applications (long-term measurements), high flow velocities) Testo saline pots for monitoring and humidity adjustment of humidity probes, 11.3% RH and 75.3% RH, incl. adapter for humidity probe, quick check or calibration of humidity probe Saveris probes are delivered with a calibration protocol of the works adjustment data. Calibration certificates must be ordered separately. Mains units are not included in delivery. *not for continuous high-humidity applications 19

20 testo Saveris accessories: External temperature probes Pt Plug-in probes 100 Robust, Pt100 stainless steel food probe (IP65) Penetration probe Pt100 with ribbon cable, cable length 2 m, IP 54 Illustration Meas. range Accuracy t mm Ø 4 mm Connection: Fixed cable extended 60 mm -50 to +400 C -50 to +180 C Class A (-50 to +300 C), Class B (rem. meas. range) Ø 5 mm Ø 3.6 mm Robust, watertight Pt100 immersion/penetration probe Class B (rem. meas. range) 114 mm 50 mm -50 to +400 C Class A (-50 to +300 C), Ø 5 mm Ø 3.7 mm Fixed cable extended Connection cable for unlimited Pt100 stationary probes with screw terminals (4-wire technology) mm Ø 3 mm 30 mm Class A TC Plug-in probes Illustration Meas. range Accuracy t99 Stationary probe with stainless steel sheath, TC Type K Robust air probe, TC Type K Penetration probe TC with ribbon cable, Type K, cable length 2 m, IP 54 Magnetic probe, adhesive power approx. 20 N, with magnets, for measurements on metal surfaces, TC type K Magnetic probe, adhesive power approx. 10 N, with magnets, for higher temperatures, for measurements on metal surfaces, TC type K Pipe wrap probe for pipe diameters from 5-65 mm, with exchangeable measuring head, measuring range briefly up to +280 C, TC type K Pipe wrap probe with Velcro tape, for measuring temperatures on pipes with diameters up to max. 120 mm, Tmax +120 C, TC type K 40 mm Ø 6 mm Connection: Fixed cable 1.9 m 115 mm Ø 4 mm Connection: Fixed cable 1.2 m 35 mm Fixed cable extended 75 mm Ø 20 mm Connection: Fixed cable 1.6 m 60 mm Ø 5 mm Ø 21 mm Connection: Fixed cable 1.2 m 395 mm 20 mm -50 to +205 C Class 2* to +170 C Class 2* to +400 C Class 2* -60 to +130 C Class 2* 5-50 to +120 C Class 1* Connection: Fixed cable 1.5 m Thermocouple with TC plug, flexible, length mm -50 to +400 C Class 2* mm, fibreglass, TC Type K Ø 1.5 mm Thermocouple with TC plug, flexible, length mm -50 to +400 C Class 2* mm, fibreglass, TC Type K Ø 1.5 mm Thermocouple with TC plug, flexible, length mm -50 to +250 C Class 2* mm, fibreglass, TC Type K Ø 1.5 mm Immersion measuring tip, flexible, TC type K 500 mm -200 to Class 1* Ø 1.5 mm C Immersion measuring tip, flexible, for measurements in air/exhaust gases (not suitable for mea mm C -200 to Class 1* surements in smelters Ø 3 mm 30 mm Ø 3.6 mm -60 to +400 C -40 to C Class 2* Class The specified accuracy class of the Saveris radio and Ethernet probe is achieved using these external probes. *Acc. to norm EN , the accuracy of Class 1 refers to -40 to C (Type K), Class 2 to -40 to C (Type K), Class 3 to -200 to +40 C (Type K). 20

21 testo Saveris accessories: External temperature and humidity probes Plug-in probes Illustration Meas. range Probe accuracy t99 Stump probe, IP mm Ø 3 mm -20 to +70 ± 0.2 C (-20 to +40 C) ±0.4 C (+40.1 to +70 C) Stationary probe with aluminium sleeve, IP mm -30 to +90 C ± 0.2 C (0 to +70 C) * Ø 6 mm ±0.5 C (remaining meas. range) 190 Connection: Fixed cable; Cable length: 2.4 m Accurate immersion/penetration probe, cable 40 mm -35 to +80 C ± 0.2 C (-25 to C) * length 6 m, IP 67 Ø 3 mm Ø 3 mm ±0.4 C (remaining meas. range) 5 Connection: Fixed cable; Cable length: 6 m Accurate immersion/penetration probe, cable 40 mm -35 to +80 C ± 0.2 C (-25 to C) * length 1,5 m, IP 67 Ø 3 mm Ø 3 mm ±0.4 C (remaining meas. range) Connection: Fixed cable; Cable length: 1.5 m Penetration probe with ribbon cable, cable length 2 m, IP 54 Wall surface temperature probe, e. g. for proof of structural damage in buildings 60 mm Ø 5 mm 30 mm 30 mm Ø 3.6 mm -40 to +125 C ±0.5 % of reading (+100 to +125 C) ±0.2 C (-25 to +80 C) ±0.4 C (remaining meas. range) 8-50 to +80 C ± 0.2 C (0 to +70 C) Connection: Fixed cable; Cable length: 3 m Stainless steel food probe (IP65) with PU 125 mm 15 mm -50 to +150 C 2) ±0.5 % of reading (+100 to +150 C) * line Ø 4 mm ±0.2 C (-25 to C) Ø 3 mm ±0.4 C (remaining meas. range) Connection: Fixed cable; Cable length: 1.6 m Watertight immersion/penetration probe 115 mm 50 mm -50 to +150 C ±0.5 % of reading (+100 to +150 C) Ø 5 mm ±0.2 C (-25 to C) Ø 4 mm ±0.4 C (remaining meas. range) Connection: Fixed cable extended Pipe wrap probe with Velcro tape for pipe diameters 300 mm -50 to +70 ± 0.2 C (-25 to +70 C) of up to max. 75 mm, Tmax. +75 C, ±0.4 C (-50 to C) Connection: Fixed cable; Cable length: 1.5 m % RH Plug-in probes Illustration Meas. range Accuracy Humidity / temperature probe 12 mm -20 to +70 C, ±0.3 C, ±2 %RH (2 to Ø 12 mm 0 to +100 %RH %RH) Humidity / temperature probe 4 mm Ø 4 mm 0 to +40 C, 0 to ±0.3 C, ±2 %RH (2 to %RH %RH) The specified accuracy class of the Saveris radio and Ethernet probe is achieved using these external probes. *Probe tested according to EN for suitability for the areas of transport and storage 2) Long-term measuring range to +125 C, briefly to +150 C or +140 C (2 minutes) 21

22 testo Saveris set All components can be assembled individually by you. However, you also have the option of ordering a testo Saveris set. This can be supplemented with individual components as required. Set: 868 MHz, consisting of base , 3 radio probes without display , mains unit for base and SBE software incl. USB cable Set / 868 MHz Adjustment All testo Saveris probes are of course adjusted in the factory, as confirmed by an adjustment report. You can perform further calibrations or adjustments either yourself on site, via a service provider or in a calibration laboratory. The separate Saveris adjustment software is available for this. After successful adjustment, the current adjustment data is stored in the probe. At the same time, the adjustment software and the Saveris software accept this data so that the adjustment histories are available. Radio and Ethernet probes are connected to a cable via the service interface for adjustment. If you do not wish to perform your own calibration, Testo is available as a service provider. Saveris adjustment software incl. connection cable to wireless and Ethernet probes

23 Service Testo is a manufacturer of measuring instruments and measuring systems with a global presence, with 27 international subsidiaries and representatives in numerous countries. Naturally, testo also offers you onsite service. For questions regarding testo Saveris TM, from installation to retrofitting further system components, please refer to your competent contact in your country. You can find an overview of the nearest service location at 23

24 /msp/Si/A/ Subject to change without notice.