Desigo PX Automation system for HVAC and building services

Transcription

1 Desigo PX Automation system for HVAC and building services System overview Version 5.1_SP and later Building Technologies

2 Desigo PX Automation system for HVAC and building services Version 5.1_SP and later System overview CM110756en_ / 30 Siemens Building Automation Desigo PX Automation system for HVAC and building services - System description CM110756en_

3 Table of contents Desigo PX: the scalable automation system... 4 Modular design for universal application... 4 BACnet communications for maximum openness... 4 Made-to-measure operator units... 5 A family of programmable automation stations... 5 Scope for phased expansion... 5 Monitoring, operation and display... 6 Alarm management... 6 General alarm mechanisms... 6 Automatic information for the plant operator:... 6 Overview of plant faults... 7 Alarm functions... 7 Safety aspects... 7 Alarm visualization... 8 Displaying the plant status... 8 Monitoring the plant with trend functions... 9 Global data... 9 Scheduler/Calendar day programs (for each switching routine) Exception programs Calendar Data access rights Access levels Remote management Operation at the automation level Desigo Touch and Web PXM20 network operator units PXM10 operator unit QAX room operator units Web operation with PX-WEB A family of programmable automation stations The compact automation stations Automation stations modular series PXC..D Desigo TX-I/O modules Overview of TX-I/O modules Desigo tools Desigo Xworks Plus Programming with D-MAP Proven application solutions Phased expansion to meet growing needs Expansion with the Desigo Insight management station Expansion with the Desigo RX room automation system Standard applications Integration into the Desigo PX automation level Integration of third-party products Flexible topology Table of contents / 30

4 Desigo PX: the scalable automation system The Desigo PX automation system meets all the requirements associated with the control and monitoring of heating, ventilation, air conditioning systems and other building services. The most striking features of Desigo PX are the scalability of the system with its programmable automation stations and graded range of operator units, and the system's openness. PXM40 PXM50 PXM20-E BACnet /IP PXG3.L PXG3.W100 BACnet / LonTalk PPS2 TXS1.12F10 TX OPEN PXX-L11 PXX-L12 PXX-PBUS TXM1... PX OPEN QAX... PXC50-E.D PXC100-E.D PXC200-E.D PXA40-T PXA40-W0 PXA40-W1 PXA40-W2 TXM1... TX-I/O-Module TXI1.OPEN PXC...-E.D Modular PXC50-E.D PXC100-E.D PXC200-E.D P-Bus TXS1.12F10 PXA40-RS... TXS1.EF10 TXM1... DC 24 V (max. 64 BE) Third-party Geräte / Systeme RXC... Third-party RXB... Third-party KNX Third-party Geräte / Systeme The Desigo PX automation system with operator units Modular design for universal application With its modular design, Desigo PX can be adapted to specific requirements and needs, making cost-effective DDC technology a possibility even in small HVAC systems. Investment costs are limited to those system components that are actually needed. This innovative approach allows phased expansion of Desigo PX into a building automation and control system as and when required. BACnet communications for maximum openness Desigo PX sets new standards in relation to present and future communications technologies. The use of BACnet /LonTalk or BACnet/IP underlines the openness of our systems and our utilization of the latest communications technologies. BACnet opens up the system, to allow easy integration of systems and components from third-party manufacturers. 4 / 30 3BDesigo PX: the scalable automation system

5 Made-to-measure operator units The various operator units in the Desigo PX range more than satisfy all the various requirements in terms of location and function. Web client PXM10 and PXM20 operator units The plant can be monitored and operated from a Web client via a Web controller. In the event of a fault, the Web controller transmits SMS messages and allows remote diagnostics via Web client. The PXM10 and PXM20 operator units, which can be optimized for different categories of user (e.g. resident engineer), offer users an easy means of checking the operation of the building services plant or of modifying the comprehensive time schedules to take account of changes in occupancy. Touch panels PXM40 (10.1") and PXM50 (15.6") Unique operator interface, optimized for touch operation. Clear structuring of operating functions and navigation provide for easy and efficient operation. A family of programmable automation stations PXC automation stations The D-MAP programming language With the PXC family of programmable automation stations, Desigo PX offers maximum flexibility in the control and monitoring of building services systems. Comprehensive system functions such as alarm management, time scheduling and trend data storage cover all the requirements associated with the operation of a building. The distributed automation stations, available in two categories, operate autonomously. Communication is via the open BACnet protocol. Professional software tools are available for engineering and other processing of the automation stations. The starting point for the engineering of the program functions is the range of userfriendly application blocks and function blocks in the new programming language D-MAP (Desigo Modular Application Programming). D-MAP is optimized for building services applications and is based on the IEC 1131 standard. The graphical user interface of the software tools ensures an efficient approach. Scope for phased expansion The Desigo PX automation system can be expanded step by step into a full building automation and control system. Desigo Insight Desigo RXC / thirdparty products: Integration via System- Controller Ethernet/IP LAN backbone The Desigo Insight management station offers convenient multi-user operation system wide. It can be connected to Desigo PX via Ethernet/IP, LonTalk / LONWORKS or by modem. Desigo RXC room controllers can be integrated seamlessly into the automation level via the system controllers. Third-party subsystems, such as fire detection systems, intruder protection, lighting or refrigeration plant, can be integrated simply and cost-effectively into Desigo PX. All parts of the plant can be interconnected via router and Ethernet/IP LAN. The automation stations also communicate directly on Ethernet/IP, allowing costeffective use of the existing IT infrastructure for Desigo PX. 3BDesigo PX: the scalable automation system / 30

6 Monitoring, operation and display Alarm management An important factor for the efficient operation of plant is the alarm management system, which ensures early identification of problems in the plant and initiates automatic strategies to help prevent any resulting damage. General alarm mechanisms Desigo PX is based on the BACnet standard. With three types of alarm, Simple, Basic and Extended, the method of handling and acknowledging alarms can be matched to the plant technology. The alarm message is accompanied by vital information which helps the building occupant to locate the cause of the fault. Additional information in text form is automatically added to the alarm message. Alarms are identified with a date and time stamp. Technical staff can see exactly where the alarm originated in which plant, which aggregate and which component. Automatic information for the plant operator: Many building services installations are not continuously monitored by technical staff. This is why Desigo PX automatically transmits alarm messages to a predefined address. Alarm pop-up on PXM20 Alarm message to SMS receiver 6 / 30 4BMonitoring, operation and display

7 Overview of plant faults The plant operator can use the Alarm Viewer function to display all active alarms and their current status. Alarm Viewer in PXM20 Alarm Viewer via PX-WEB Web operation Alarm Viewer in PXM40/50 Alarm functions Simple alarm Basic alarm Extended alarm The standard "Simple" alarm triggers certain reactions in the automation station, e.g. equipment is switched off, valves are opened, etc. At the same time, the alarm message is transferred to the specified target operator units and output devices. There is no need for the alarm to be acknowledged by the customer; however, the display or the pop-up window of the operator unit can be deleted. "Basic" alarms are used for important alarms which require the operator to check the cause manually. When an alarm occurs, the automation station triggers the appropriate reactions, such as automatic switch-off, opening of valves, etc. The alarm message is simultaneously saved and transmitted to display units such as local operator units or management stations, as defined in the alarm distribution system. The alarm must be acknowledged. The "Extended" alarms, for safety functions, are an expansion of the basic alarm function. With these alarms, the operator must not only acknowledge the incoming alarm but also, after checking the cause of the alarm and clearing the fault, reset the alarm to return the plant to normal operation. This alarm mechanism offers double security and is especially suitable for safetycritical plant. Safety aspects To avoid the loss of alarms in transit, all transmitted alarms are monitored for transfer and receipt. Any information about faulty transmissions is saved. 4BMonitoring, operation and display / 30

8 Alarm visualization When an alarm is displayed, the user can see the relevant information at a glance. The display format is uniform throughout the system. Displaying the plant status The building operator can obtain an overview of the status of the building services plant at any time, in order to initiate any necessary actions. The overview includes the most important current values, plant status and setpoints. For a quick and simple overview, the building operator can quickly identify the current values in the building services plant from the list of the most important values, and can then initiate the required actions, based on the plant status displayed (e.g. OFF). Alternatively, the building operator can obtain the required information displayed directly in a plant graphic page, via a standard Web client and customer-specific or plant-specific overviews. These graphics-based overviews can also be easily created or customized by the operator. Overview of plant on PXM20 Project-specific plant graphics (overview) displayed on Desigo touch panels and web clients 8 / 30 4BMonitoring, operation and display

9 Monitoring the plant with trend functions To check the dynamic response of the building services plant, trend functions are provided which the user can set up as required, to monitor critical equipment or to log relevant data for further processing. To do this, the user simply defines which data points are to be monitored and how frequently. The trend functions can also be combined with other system functions. Trend logging can be stopped, for example, at a predefined time or when an alarm event occurs. The logged data is available for analysis at a later date. With the PXM20, the user has a simple means of logging up to five data series and displaying them, two at a time, in graph form. Trend data can be transferred to Desigo Insight. Checking the dynamic response of the plant using the PXM40/50 or a Web client Global data Every automation station contains all the data necessary for stand-alone operation. The same applies to shared data such as date/time or calendar information which is identical for several or all automation stations. To avoid having to update changes in parameter settings separately in each automation station, the shared data is treated as "global data" and handled centrally. 4BMonitoring, operation and display / 30

10 Scheduler/Calendar The time control of procedures and processes is one of the daily basic functions of a building automation and control system. Ventilation, heating, air conditioning, lighting, door locks etc, are controlled on the basis of opening times and working hours in buildings such as offices, banks, restaurants, department stores and schools. Scheduler programs ensure that lights are switched off automatically at the end of the working day, and that the temperature setpoint in the building is reduced at night. These schedulers can also be used to ensure that offices are not airconditioned during public and works holidays, and that plant is not kept running for longer than necessary. All scheduler programs are directly saved and processed locally at the automation level. Thus full synchronization of individual processes is ensured at all times. Optimum scheduling helps save energy and extend the life of the plant. In practice, building operators do not exploit this potential to the full, because the time scheduling in their systems is too complex and lacking in clarity. The Desigo operator units display ergonomically designed time schedules which are easy to use. 7-day program on the PXM20 Calendar on the PXM20 7-day program / calendar on the PXM40/50 7-day programs (for each switching routine) Time-switching profiles over seven days. Ten switching operations possible per day possible (1-minute resolution). Three different output signals digital (on/off); multi-state (e.g. off - stage I - stage II), analog (e.g. 21 C). 10 / 30 4BMonitoring, operation and display

11 Exception programs Date, exception and holiday programs to override the 7-day program A maximum of 20 exception profiles, each consisting of 10 switch times Entry of special recurrent exception programs, Example: for a shopping center which remains open until 2000 hours every 3rd Saturday in the month. Overview of all plant parts controlled by this 7-day program. Calendar Display of dates for control of exception profiles. The scheduler programs and calendar are based on the BACnet standard. Data access rights Access rights provide the convenience of filtering information according to the individual user requirements. This means, for example, that the resident engineer or service engineer only has access to the information actually needed to do the job. A distinction can also be made between read access and write access. Certain users may be able to read a value but not modify it, while other users may have extended access rights, enabling them both to read and to modify values. Information to which a user has no access is not displayed to that user on the PXM20 operator unit. Access levels Within the system there are four basic categories of access, ideally matched to individual user groups. The more experienced the users, the greater the amount of information to which they have read and write access. These access rights can, however, be modified at any time to suit a specific project. Up to seven access levels can be defined. The basic rule is that users with a given access level have access to all values at their own level and at all access levels below their own. Remote management The Desigo system allows the remote management of building services plant, both from a Web client and with the Desigo Insight management station. The following functions are supported: Remote fault and maintenance alarms Remote monitoring and operation of all plant Overview and modification of 7-day programs, calendars and setpoints Modification of operating parameters 4BMonitoring, operation and display / 30

12 Operation at the automation level Desigo Touch and Web The PXG3.W100 web interface is the central access point to operate the automation level. It allows for simultaneous operation via different operator units and supports both connection of Desigo touch panels PXM40 / PXM50 as well as access via devices using the standard web browser. The Desigo touch panels PXM40 / PXM50 are intended for mounting in control panel doors. They are used together with the PXG3.W100 web interface. They allow for intuitive operation of several Desigo PX automation stations as well as permanent monitoring of technical installations in buildings. TCP/IP is used for communicaton. Web interface PXG3.W100 Touch panel PXM40 (10.1") / PXM50 (5.6") Schedule Trend Web interface PXG3.W100 Intuitive operation and monitoring of several plants or Desigo PX automation stations Restricted view of plant level as an option Login/Logoff function Simple plant overview without user login possible Graphical plant operation Alarm list for alarm monitoring List of favorites with text-based operation of freely selectable data points Graphically adjustable scheduler Graphical display of Trend objects (Offline Trend) Local settings (e.g. languages) Optimized interface for Desigo touch panel PXM40 / PXM50 for local plant operation and monitoring 12 / 30 4BMonitoring, operation and display

13 PXM40 / PXM50 operating unit Compact design with low mounting depth, for mounting in control panel doors High-resolution TFT color display in wide screen format Capacitive touch screen LED background lighting, dimmable Optimized for local priority operation of the Desigo building automation and control panel LED to indicate alarms when the screen is inactive Assisted commissioning by means of a wizard Remote access to the touch panel via VNC No additional mounting materials required Full screen view no access to operating system functions Type summary PXM40 Desigo touch panel 10.1" PXM50 Desigo touch panel 15.6" PXM20 network operator units The PXM20 and PXM20-E network-compatible operator units allows full operation of all Desigo PX automation stations connected to a BACnet network. As a BACnet client, the PXM20/20-E automatically reads the data from the Desigo PX automation stations. It is therefore always up to date and can be replaced while the system is in operation. The operator unit has a high-resolution illuminated display for graphics and text, keys for operation, and a common alarm indicator with an audible signal. The operator unit can be mounted remotely for compact and modular automation stations in the control panel door. The clearly arranged function buttons and fast access buttons ensure correct operation, even by inexperienced users. PXM20 operator unit Time scheduler Alarm overview Online trend Graphic display of the heating curve 4BMonitoring, operation and display / 30

14 PXM20 / PXM20-E operator functions Alarm monitoring with acknowledgement and visual and audible alarm indication. Data point display and operation of all measured values, setpoints, plant states, operating states and parameters. Graphics-based display and operation of time schedules, exception calendar, online-trend and heating curve. User-friendly guidance through the plant functions. Favorites, configurable overview of main values in the plant. Multilevel access protection. Type summary PXM20 PXM20-E Operator unit for the automation level. Communication via LonTalk Operator unit for the automation level. Communication via IP PXM10 operator unit The PXM10 operator terminal allows full local operation of a Desigo PXC automation station. The unit incorporates user-friendly "one-button" operation and a high-quality display panel. The PXM10 can be installed remotely in a control panel door to operate compact and modular automation stations, or it can be plugged directly into a modular automation station. PXM10 operator unit Display of setpoints and actual values Alarm display Scheduler PXM10 operator functions Display of measured values, setpoints, plant states and operating modes Setpoint adjustment where required Visual alarm display Alarm display with scope for acknowledgement Graphics-based display of time schedules 14 / 30 4BMonitoring, operation and display

15 QAX room operator units Up to five bus-compatible QAX... room devices can be connected to the PPS2 bus of a compact series automation station. (Exception: only one QAX84.1/PPS2 per PPS2). The various options include. Digital display options Status display Plant switching functions QAX30.1 QAX31.1 QAX32.1 QAX33.1 QAX34.1 QAX84.1/PPS2 2) Function overview QAX30.1 QAX31.1 QAX32.1 QAX33.1 QAX34.1 QAX34.3 3) QAX84.1/ PPS2 2) Room temperature sensor Setpoint correction Operating mode switch Fan speed switch LCD display for room temperature, setpoint adjustment and operating mode 2) Flush-mounted room unit 3) One unit per PXC 4BMonitoring, operation and display / 30

16 Web operation with PX-WEB With its integrated Internet technology, the embedded Web server allows full plant option of the automation station using standard Web browsers. The Web server is integrated into the modular automation station PXC00/50/100/200-E.D using the option module PXA40-W.. PXC00/50/100/200.E-D with pluged-in option module PXA40-W.. Operate and monitor via Web client Main functions of PX-WEB: Operation via Web browser or mobile clients (mobile phone, PocketPC or PDA). Simple plug-and-play functions; no engineering needed. User-friendly guidance through the plant functions. Full access to all measured values, setpoints, plant and operating states, and parameters. Comprehensive data point operation and setpoint entry using clear text. Alarm management via SMS (to specified telephone number) or by . Operation of time schedules, exception calendar and heating curve graphs. Reading of trend data, with the facility to export data to Microsoft Excel for evaluation purposes. Collation of main values via Favorites. Support of multiple level access protection. Additional graphics-based display of plant easy to create and modify. Modem and Ethernet version available. Plant operation Alarm overview PX-WEB type summary PXC0/50/100/200-E.D + PX40-W1 Access with Web server via IP, alarms via SMS and , generic Web functions / operation on all connected Desigo PX automation stations of a BACnet network PXC00/50/100/200-E.D + PX40-W0 / W2 Access with Web server via IP, alarms via SMS and , graphical Web functions/operation on all connected automation stations (for PXA..-W0) or on all Desigo PX automation stations of a BACnet network (for PXA..-W2) 16 / 30 4BMonitoring, operation and display

17 A family of programmable automation stations There are two series of automation stations in the range: compact and modular. The essential difference between the two series is the flexibility of their data point mix, This strategy ensures optimum adaptability to customer requirements and to the building services plant. A family of programmable automation stations PX automation stations Modular PXC...D Compact PXC... PX system controllers PXC00...D with PXX-L.. PXC001.D, PXC001-E.D PXC001.D, PXC001-E.D with PXA40-RS.. HMl automation level Web client x x x x PXM20 x x x x x PXM10 x x x QAX3... x System functions (BACnet) Alarms x x x x x Time schedules x x x x x Trend x x x x x I/O with value objects x x x x x Programming with D-MAP x x x x x I/O subsystem Island bus Direct connection of I/Os LONWORKS KNX KNX, Modbus, M-Bus, SCL Additional functions Grouping x 5BA family of programmable automation stations / 30

18 The compact automation stations The mounting technique and the fixed configuration of integrated I/Os in the compact series automation stations make them ideal for control of small and distributed plant. The I/Os in these automation stations can be adapted to various types of signal. The automation stations are installed in the control panel. The operator units are connected to BACnet, PPS bus or HMI connection. Automation station PXC22-E.D Plant size I/O: UIO DI DO BACnet/LonTalk PXC12.D PXC22.D PXC36.D BACnet/IP PXC12-E.D PXC22-E.D PXC36-E.D Input and output options UIO Universal inputs, which can be connected to Passive (LG-Ni 1000) and active (DC 0 10 V) sensor elements Binary volt-free contacts, for signaling functions Counters (20 Hz) DI DO Analog outputs for the connection of V actuators Via the program structure, some of the UIOs can also be programmed as binary switch functions and connected to 24 V/20 ma loads (PXC12/22..D: 4 UIOs; PXC36: 6 UIOs) Binary inputs for signaling functions. AC 230 V / 2A relay outputs for binary control. Up to 5 QAX3 room units can be connected to all compact series automation stations. 18 / 30 5BA family of programmable automation stations

19 Automation stations modular series PXC..D The modular series PXC..D automation stations with its free I/O configuration and DIN compliant construction are optimized for panel assembly. It primarily controls and monitors larger items of plant. The flexible TX-I/O modular product range for signaling, measuring, metering, switching and positioning can be seamlessly connect to the automation station. The I/O modules with local manual controls on the module housing provide the plant operator with simple manual operation of the plant directly in the control panel. This local manual control is automatically transmitted as a remote/local signal to the automation station and associated operator units. In an emergency, they operate independently of the automation station, providing stand-alone emergency operation. PXC50/100/200..D modular automation station with connected TX-IO modules Automation stations Automation station overview Connection of TX I/O modules via island bus up to52 data points up to 200 data points More than 200 data points BACnet/LonTalk PXC50.D PXC100.D PXC200.D BACnet/IP PXC50-E.D PXC100-E.D PXC200-E.D System controllers The LonWorks system controllers allow you to connect LonWorks devices such as Desigo RXC room controllers and third-party devices. Overview of system controllers LonWorks PXC00.D System controller with BACnet/LonTalk communication PXC00-E.D System controller with BACnet/IP communcation The automation stations / system controllers supplement room automation with the functions grouping, scheduling, trending, alarming and mapping data points on both BACnet/IP and BACnet/LonTalk. 5BA family of programmable automation stations / 30

20 Option modules The option modules for automation stations assume additional functions such as PX-WEB or remote management together with Desigo Insight. Option modules for automation stations PXC00/50/100/200.D PXA40-T Option module for remote management. Option module overview for automation stations PXC50/100/200-E.D PXA40-T PXA40-W0 PXA40-W1 PXA40-W2 Option module for remote management. PX-WEB option module for IP, remote management, SMS, 1) and alarming with graphics-based Web functions 1) for the automation station fitted with the module. PX-WEB option module for IP, remote management, SMS 1) and alarming with graphics-based Web functions 1) for all automation stations connected to a BACnet network. PX-WEB option module for IP, remote management, SMS 1) and alarming with graphics-based Web functions 1) for all automation stations connected to a BACnet network. 1) One communication type only: Either Desigo Insight PTP or WEB PPP Extension modules The PXX-Lxx extension modules allow connection of LonWorks devices such as Desigo RXC room controllers and third-party devices to the system controller LONWORKS, PXC00 D, as well as to the PXC50/100/200 D automation stations. Extension module overview PXX-L11 PXX-L12 Extension module for up to 60 LONWORKS devices / RXC room controllers (With PXC50...D: up to 10 LONWORKS devices) Extension module for up to 120 LONWORKS devices / RXC room controllers (With PXC50...D: up to 10 LONWORKS devices) The PXX-PBUS extension module allows connection of existing PTM-I/O modules to the PXC50/100/200 D automation stations, which is an optimized solution for the migration of legacy VISONIK and UNIGYR systems. Extension module overview PXX-PBUS Extension module for the integration of PTM-I/O modules together with PXC50 D up to 52 IOs together with PXC100 D up to 200 IOs together with PXC200 D up to 350 IOs 20 / 30 5BA family of programmable automation stations

21 Desigo TX-I/O modules Desigo TX-I/O modules, which provide the interface to the devices at the field level, the sensors and actuators. They communicate with connected Desigo PX modular automation stations and can be interconnected in application-specific configurations. A space-saving, flexible product range of compact TX-I/O modules is available for signalling, measuring, metering, switching and positioning. The I/O module system is DIN compliant in design and optimized for panel mounting and supports decentralized, remote module installations. The TX-I/O modules have LEDs or optional LCD displays with signal and warning display programs to indicate the state of the plant and can be manually or emergency operated depending on the module type. The integrated isolating-terminals facilitate the hardware test carried out during commissioning. The combination of Desigo TX-I/O modules with proven PTM modules within a plant is also possible without a problem. For the user, the advantages of the Desigo TX-I/O modules are as follows: Integrated isolating-terminal feature. Integrated manual controls (optional). Integrated diagnostics functions with LED and optional LCD display. Optimized for HVAC actuators and sensors. DIN compliant construction optimized for panel mounting. Self-connecting bus connection for the easiest possible assembly. Lean, flexible product range for optimized logistics. Clear text module labeling. Tool support for configuration, diagnostics and function test. Third-party integration with Desigo TX Open modules for Modbus, M-bus meters and variable speed drives (Siemens SED2). Desigo TX-I/O modules with integrated isolating terminals and optional manual operation You can integrate third-party integration, for example, pumps (GRUNDFOS, WILO), compact air conditioning units (MENERGA), M-bus meters, and variable speed drives in a decentralized and economic manner. Access to the following information is available, for example, when pumps are connected: Control operating mode Setpoint adjustment Fault and status codes Delivery head Power Speed 6BDesigo TX-I/O modules / 30

22 Overview of TX-I/O modules Type TXM1.8D TXM1.16D TXM1.8U TXM1.8U-ML TXM1.8X TXM1.8X-ML TXM1.6R TXM1.6R-M TXM1.8P TXM1.6RL TXM1.8T Total number of inputs/outputs Functionality Local override LCD panel 3 color I/O status LED Green I/O status LED Digital inputs (DI) N/O or N/C Signal pulse Counter 10 Hz (with debouncing) 1 8 1) Counter 25 Hz (no debouncing) Analog inputs (AI) LG-Ni1000 Pt1000 / Ohm T1 NTC 10K / 100K DC V Ohm ma / ma Pt100 4-wire Analog outputs (AO) DC V ma 5 8 1) 5 8 1) Digital outputs (DO) Permanent contact on/off Permanent contact 4-stage 3-position output Pulse on/off, 3-stage Multistate Triac Permanent contact Triac Pulse (3-stage) Triac Pulse witdth modulation Blinds control Permanent contact, bistable 1) Implementation on these I/O points 22 / 30 6BDesigo TX-I/O modules

23 Desigo tools Professional software tools and a wide range of proven application blocks are available for engineering and processing the automation stations. Desigo Xworks Plus The engineering tool Desigo Xworks Plus offers user-friendly software tool that are easy to use and geared to technical processing of customer projects. They include planning, configuration, commissioning and final adjustment of the automation station with the associated program. A variety of report functions are available for documentation purposes. Thanks to its intuitive design of Desigo Xworks Plus, makes it easy to begin working with the time without time-consuming training. Various processes are consistently supported depending on whether you are working with standardized Desigo application libraries or setup the program using data points. Flexible programming Moreover, Desigo Xworks Plus provides tools that flexibly program, together with the Desigo application library, individual solutions as well as parameterization and commissioning. The CFC Editor is used as a basis for this work. Data exchange is continous for distributed work on various user groups within the project. Data only needs to be entered once and is always consistent. Functions for project management are available such as creating and archiving projects as well as check in/out of project data for commissioning. As a comprehensive engineering tool, Desigo Xworks Plus also establishes network topology, integrates third-party systems up to the planning of room automation systems. At the same time Desigo Xworks Plus supports the interaction with standard room automation LNS tools as well. 7BDesigo tools / 30

24 Programming with D-MAP The D-MAP programming language (Desigo Modular Application Programming) for Desigo PX ensures efficient programming and parameter setting for building services plant. D-MAP is optimized for building services applications. The control strategies required for and best suited to efficient operation are implemented using graphics-based data flow programming. Efficient engineering with blocks and compounds The project-specific HVAC applications are configured, programmed, commissioned and maintained using the CFC Editor. The CFC Editor is a graphics editor based on block and data flow techniques. Predefined and tested application programs are assembled to create compound structures (referred to simply as compounds ), and these are then made available in the libraries. Creating the CFC chart with the CFC Editor DMAP programming features The basic elements of D-MAP programming are blocks and "compounds" (compound functional units). These are stored in libraries. To create a D-MAP program, the blocks and compounds for the required functions are put together in the CFC Editor. This process involves creating instances (of blocks) or copies (of compounds) from the libraries The flow of data between blocks is programmed by interconnecting the "pins" (inputs and outputs) of various blocks 24 / 30 7BDesigo tools

25 Proven application solutions The broad range of Desigo application libraries cover individual customers needs with building automation and control applications in a comprehensive manner. All available solutions contain images of actual plant, aggregates and components in a structure which can be used equally for design engineering, control, operation and monitoring and display. You can lower operating costs in a sustainable way using energy optimizing Desigo applications saving energy resources and lowering CO2 emission in the process. Energy efficiency Safety and quality Comfort Operation and monitoring Flexibility Standardized, tested functions meet European standard EN15232 : 2007 Energy Efficiency in buildings Influence of Building Automation and Control and Building Management in the highest classes. Using the existing energy efficiency applications, you not only sustainably save the environment, but also lower building operating costs through the entire life cycle of the building. The application reflect decades of Siemens experience. Many of software applications were developed and extensively tested in real plants to maximize the safety and quality of the solutions. The application portfolio guarantees a high degree of protection for your investment All applications are created with a focus on maximizing the user s comfort. With their sophisticated control strategies and concepts, the applications offer a optimum balance between comfort and energy use. All applications are subject to a transparent operating concept to keep training costs to a minimum. The ease of operation is applied throughout the entire Desigo system and is provided to the customer when compiling the plants. We always pay special attention to ease of operation should operator interventions be required on the Desigo Insight management station or on the panel using the PXM10 / PXM20. Thanks to its consistent operating concept, operators are able to quickly initiate the proper measure; even during hectic situations. Desigo applications map real plants and are clearly structured. Multiple components form an aggregate with multiple aggregates forms a complete plant. Changes to the structures can be undertaken in a flexible manner during a project's engineering phase. Desigo applications thus fit into the overall expandable modular system, ensuring long-term cost-effectiveness. Energy efficiency Safety and quality Comfort p p Flexibility Operation and monitoring 8BProven application solutions / 30

26 Phased expansion to meet growing needs The Desigo PX automation system can be added to and expanded, so fulfilling the requirement for optimum flexibility. With its modular structure, the system can be adapted to buildings of any type and any size, with scope for phased investment, thereby ensuring long-term investment protection and optimum added value. Desigo WEB and Desigo Terminal Server enable in addition the access to the Managementstation via Web-Technologie. Expansion with the Desigo Insight management station The Desigo Insight management station offers convenient, system-wide multi-user operation, for control and monitoring of all the building services plant from any management station. With its modular structure, Desigo covers all levels of sophistication, from small buildings to large building complexes and geographically separate buildings. The Desigo Insight management station incorporates various user applications depending on requirements: Plant Viewer: graphics-based operation of the plant Trend Viewer: logging and display of measured values Alarm Viewer: display of alarm messages Log Viewer: logging of system events Time Scheduler: time schedulers for a wide range of switching routines Object Viewer: display and modification of data point values Alarm Router: transfer of alarm messages Report Viewer: Reports from present values Reaction Processor: Systemwide monitoring of processes with action by arrival of events Database Audit Viewer: Enhancement for auditing according to Pharma Standard Insight-Open: Integration of third-party systems Data analysis to identify strategies for optimized energy use Example of Plant Viewer 26 / 30 9BPhased expansion to meet growing needs

27 Expansion with the Desigo RX room automation system Desigo RXC is a room automation system for room-by-room control of HVAC plant, lighting and blinds. The range consists of compact and modular room controllers and programmable room units which can be adapted to the functions in the rooms. Standard applications The proven standard applications ensure an ideal range of functions and optimum reliability. The downloadable applications can be adapted quickly and cost-effectively to any changes in room use. Individual standard applications can be commissioned efficiently with a clear and comprehensible software tool. The room controllers communicate with the Desigo room units and other LONMARK compatible devices via the standard LonTalk/LONWORKS or KNX S-Mode (EIB) bus system. Modular solution for HVAC, lighting and blinds Low-cost solution for radiators, chilled ceilings and VAV control Cost-efficient compact fancoil solutions Integration into the Desigo PX automation level The room automation system operates in stand-alone mode at the field level, but can also be integrated into the Desigo PX automation level via a system controller. In addition to this integration option (mapping between LonTalk or KNX S-Mode (EIB) and BACnet data points), the system controller also allows the following functions: Collection of room-group data for further processing at the automation level (energy demand etc.) Collection of data for monitoring and operation at the management level Alarm generation in the event of faults, or where process values are overwritten Scheduler program/calendar Trend monitoring of rooms Uniform operation at the automation level, using the PXM20 and/or Web client The integration of Desigo RXC into the automation level is done as follows: PXC00/50/100/200...D with PXX-L11 for 60 RXC room controllers PXC00/50/100/200...D with PXX-L12 for 120 RXC room controllers For the integration of Desigo RXB into the automation level, the following system controller is available: PXC001.D, PXC001-E.D 9BPhased expansion to meet growing needs / 30

28 Integration of third-party products Additional subsystems from third-party manufacturers, such as fire detection systems, intruder protection, lighting or refrigeration plant, can be integrated simply and cost-effectively into Desigo PX. The various integration options are as follows: via TX Open via PX Open system controller via standard BACnet communications (peer-to-peer) PX Open makes it possible to integrate third-party products which do not support BACnet, by converting all the data into standard BACnet objects. The result is a uniform, open system at the automation level, able to communicate with other automation stations and operator units. Field level and room controller Automation level Management level System controller LONWORKS LONWORKS LONWORKS RXC Third-party Room system controller Third-party system BACnet Sinteso Cerberus PRO PX KNX Synco 700 Standard controller Primary plants RXZ97.1/KNX Third-party system PXC50/100/200..D Modular TX-I/O modules QAX9.. EnOcean Room units Management station Desigo Insight Third-party system TX Open BACnet/LonTalk or BACnet/IP PXC...D compact Peer to peer communication via BACnet ev. adapter PX Open RS232 RS485 Modbus M-Bus Third-party system several protocolls 10756Z06en_01 ev. router SX Open OPC Drittsystem Integration of third-party products In conjunction with the system controller, the PX-Open platform adds the following BACnet functions to the subsystems of third-party manufacturers: Mapping of data points to BACnet Alarms Scheduler/Calendar Trend Peer-to-peer communications with other PX automation stations Uniform operation at the automation level, using the PXM20 and/or Web client 28 / 30 9BPhased expansion to meet growing needs

29 Flexible topology Various transport media can be used for communication between the system components of the Desigo PX system. In new buildings and in modernization projects, this ensures maximum flexibility with minimum investment. The key feature is the use, at both the management level and the automation level, of BACnet, the international standard protocol specifically optimized for building automation and control. The following media can be used for communication between the system components, so making optimum use of existing installations in and between buildings: LonTalk / LONWORKS Ethernet/IP RS232 PTP Further, in the event of expansion or extension, Ethernet/IP is easily introduced as a "backbone" for the system. Desigo Management station PXM20-E Operator unit PXM40 / 50 Desigo touch panel Web clients BACnet/IP 10756Z07en PXC...-E.D Compact PXC50/100/200-E.D Modular TX-I/O Modules PX KNX System PXG3.W100 Web interface PTM-I/O modules Third-party devices KNX S-mode / EIB or bus Desigo RXC Room controller Desigo RXB / RXL Room controller Synco 700 Standard controller Example of a building topology 29 / 30 9BPhased expansion to meet growing needs

30 Siemens Schweiz AG Building Technologies International Headquarters Gubelstrasse 22 CH-6301 Zug Tel Fax Siemens Schweiz AG Building Technologies Sennweidstrasse 47 CH-6312 Steinhausen Tel Fax The information in this document contains a general description of the available technical options, which may not apply in all cases. The required features should therefore be specified on a case-by-case basis at the time the contract is concluded.