Specifications for Online Real Time Mission Data Logging & Retrieval System

Transcription

1 Specifications for Online Real Time Mission Data Logging & Retrieval System Introduction: DRDL is planning to implement unified storage solution (SAN and NAS capability) with storage scalable to at least 144 drives. This will be used by intranet activity like, storing of database, file data, application data, web & data etc. with 24/7 operational. It is planned for unified storage solution with no single point of failure & with SAN & NAS functionality within the same storage array. Tape Library will be used for having one more copy of the data. Proposed tape library to have inbuilt redundancy like tape drive, power supply. The solution is to provide management facility with front touch screen operational panel & remote management. SAN switches and FC HBAs will be used for servers to storage connectivity. Proposed STORAGE solution should be from the major vendors like IBM, HP, EMC, Fujitsu and NetApp or equivalent. Proposed BACKUP Hardware solution should be from the major vendors like IBM, HP, DELL, TANDBURG and Overland Storage or equivalent. Proposed BACKUP software solution should be from the major vendors like IBM -Tivoli, HP - Openview and DELL Netvault or equivalent. Proposed SAN Switches should to be from the major vendors like Cisco and Brocade or equivalent. One onsite engineer has to placed for 1 year at DRDL to maintain storage, storage connectivity, regular backups and administration. Computer Storage S. No. Feature Description 1 Primary Storage 1 no 1 Storage Controller 2 Cache required 3 Protocols Supported 4 Storage Capacity The Storage system must have at least two controllers running in an active-active mode with automatic failover to each other in case of one controller failure. The system should have 12 GB cache across the two controllers with an ability to protect data on cache if the system fails and it results into controller failure. The cache on the storage should have 72 hrs or more battery backup. The storage shall support FCP, iscsi, NFS and CIFS protocols for use with different applications. Any hardware/software required for this functionality shall be supplied along with it in No Single Point Of Failure mode. The storage shall support FC/SAS and SATA based disks simultaneously. The storage shall be supplied with 10.4 TB of net usable data capacity with 8TB on 1 TB SATA HDDs and 2.4TB on 600GB 15K RPM SAS disks, after removing the drives 1/13

2 9 5 6 Front-End & Back- End connectivity RAID configuration required for (a) Parity/Mirror, (b) hot spares. The storage should have Fiber Channel protocol to operate at 8Gbps for front-end connectivity. The system should have 8 x 1Gbps Ethernet connectivity for hosts. The Controller should have SAS Ports for connectivity to disks. The system should support RAID 1, 4/5, RAID1+0/RAID6 or equivalent.the RAID implementation on the storage will be such that it is able to protect against two drives failing in the same RAID Group simultaneously. 7 Storage Scalability The storage should be scalable to at least 144 drives. 8 Hot spare disks Storage built-in functionality 10 Clones The number of hot spares should be as per the best practices of the vendor. However there should be a provision for minimum of 2 global hot spare disks for SAS and minimum of 2 global hot spare disks for SATA. The storage shall have the ability to expand LUNS/Volumes on the storage online and instantly.the storage should support 500 Volumes per controller The storage shall have the ability to create logical volumes without physical capacity being available or in other words system should allow over-provisioning of the capacity. The license required for the same shall be supplied for the maximum supported capacity of the offered storage model. The storage shall support quality of service by allocating system resource priority on the corresponding LUNS/Volumes through priority allocation or by use of cache partitioning The storage shall support logical partitioning of controllers in future such that each partition appears as a separate storage in itself. The storage shall support standard storage (SAN & NAS) security features and igroup. System should have redundant hot swappable components like controllers, disks, power supplies, fans etc.storage should supply with Rack mountable Kit and Indian Power Cords. The storage shall support creation of snapshots. This is for use in development environment, for running reports and for DR drills. 2/13

3 13 11 Compliance Ready 12 Point-in-times images/snapshots Disaster Recovery Support 14 Licensing 15 Upgradeability/ Investment Protection 16 Management The storage solution should offer functionality for 100% tamperproof and legally presentable data. Any additional hardware or software that is required for the same shall be supplied in No Single Point Of Failure mode. Licensing for this solution will have to be provided for the complete supported capacity of the system The storage should have the requisite licenses to create instant, online and consistent point-in-time images. The storage support creation of minimum 200 snapshots/point-in-time-images per volume. The license proposed should be for the complete supported capacity of the system The solution shall have FC-IP converters either built-in or supplied separately in redundant/no Single Point Of Failure mode for both Primary as well as BCP site. The solution shall support and have enabled sync, semi-sync and Asynchronous replication on it for the full supported capacity of the system for all the protocols specified above. The solution shall support replication in cascade, one to many and many-to-one mode. The replication solution on storage shall support failover to BCP/DR storage and failback as and when required. The failover to the DR site shall be controlled from the Storage manage GUI and should include the functionality to execute any custom post-processing scripts to make sure the complete process is automated. It should be possible to run DR Drills and reports on the system when operating as DR storage without interrupting the ongoing replication. Any additional capacity required for the same shall be provided with the offer. All the licenses on the storage system must be provided for an entire capacity supported by the system from day one. The proposed system should be field upgradeable to a higher model in the family through data-in-place upgrades without requiring forklift upgrade and without requiring replacement of the disk shelves. Easy to use single GUI based console and web enabled administration interface for configuration, storage management. 3/13

4 17 OS support 17 Warranty & SLA Support for industry-leading Operating System platforms including: LINUX, Microsoft Windows, HP-UX, SUN Solaris, IBM-AIX, etc. It shall support connecting hosts over fiber channel and iscsi and shall be supplied with any Multipathing software if required with the solution. The Hardware and software quoted should have 1 year support along with upgrade and updates. 24X7 Support with 4 hours parts delivery SLA. Ethernet Layer2 Switch 2 Qty S.NO. Specification 1 Connectivity & performance 1a 2410/100/1000 Gigabit Ethernet port 1b 4 no s 1G SFP ports for Uplink 1c 1d 1e 1f 1g 1h Should support at least 176Gbps Switching bandwidth and 88Gbps Forwarding bandwidth Switch should support packet forwarding rate at least 41 mpps Should support MTU 9198 Bytes 64MB Flash memory & 128 MB DRAM Memory Should support optional dedicated Flex stacking module for ease of operation and simple configuration Should support 384 IPv4 MAC security ACEs 2 General Specification support 2a Support 255 Vlans 2b 2c 2d 2e 2f 2g 2h 2i 2j Should support N+1 Redundancy ( master + member switches ) using dedicated stack Port Flex stacking should allow minimum 4 switches in a single stack with 20Gbps module throughput Dynamic Host Configuration Protocol (DHCP) auto configuration of multiple switches through a boot server Should support separate VLAN for data & voice Should support advance security features like Private VLANs, Multi domain authentication, MAC Address notification, STRG and IGMP filtering Should support switch-port auto recovery features for automatically reactivate the disabled link should support Up to 64 aggregate or individual polices on Gigabit Ethernet port Should support STP, PVST & PVRST+(Rapid Per-VLAN spanning tree Plus) High-availability features Should support 802.1Q VLAN standard Should support Dynamic trunking protocol for facilitates dynamic trunking 4/13

5 2k 2l 2m 2n 2o configuration across all switch ports Any change in the VLAN configuration shall be propagated to all switches automatically using the central switch VLAN configuration Should support Port Aggregation Protocol (PAgP) to automates the creation of Ether Channel groups to link to another switch, router, or server Should provide IP SLA feature to analyze IP service levels for IP applications and services by using active traffic monitoring (the generation of traffic in a continuous, reliable, and predictable manner) for measuring network performance VLAN Trunking Protocol (VTP) pruning to limit bandwidth consumption on VTP trunks by flooding broadcast traffic only on trunk links required to reach the destination devices. Should supply Indian Power Cords & Rail Kit SAN Switch S.no Description Qty 1 SAN Switch (8G FC SAN Switch) 2 nos. 2 8x8GB FC ports 2 Nos. 3 Hot code activation 4 Height: 1U 5 Hardware features: Single Fixed Power Supply Fixed Redundant Fans Single Switch FRU Rack-Mount Kit Optional 6 Software features: Web Tools Advanced Zoning Full Fabric (FF) Enhanced Group Management (EGM) 7 ISL Trunking: Frame-based trunking with up to eight 8 Gbps ports per ISL trunk with optional license; up to 64 Gbps per ISL trunk (8 ports 8 Gbps [data rate]) Exchange-based load balancing across ISLs with DPS included in Fabric OS 8 Aggregate bandwidth: 192 Gbps: 24 ports 8 Gbps (data rate) 9 Maximum fabric latency: 700 ns with no contention, cut-through routing at 8 Gbps 10 Maximum frame size: 2112-byte payload 11 Frame buffers: 5/13

6 700 dynamically allocated, 484 maximum per port 12 Classes of service: Class 2, C lass 3, C lass F (inter-switch frames) 13 Port types: FL_Port, F_Port, M_Port (Mirror Port), and E_Port; self-discovery based on switch type (U_Port); optional port type control Brocade Access Gateway mode: F_Port and NPIV-enabled N_Port 14 USB: 1 USB port for firmware download, support save, and configuration upload/download 15 Warranty: Comprehensive onsite warranty for 1 year from date of implementation 2 nos. 16 Should be supplied with Rail kits and Indian Power cords 2 nos. Backup Solution Hardware S.No Description Qty 1 Backup Solution 1 no a Tape Library: - 2 x LTO-5 SAS Drives - Should have at least 48 data cartridge slots - Should have iscsi, SAS or FC drive interface - 4U form factor - Simple web based remote Management - Should support LTO-3-060, LTO-3, LTO-4-120, LTO Tape Drive Technologies - Should be rack mountable - Should have password protected remote management capabilities - Should have the capability of dividing the library into two separate logical libraries, making it possible to share the library with different servers - Operating System Support to include AIX, Windows, Linux, HP-UX, Solaris and i5-os - The tape drives should have features for preventive diagnostic reporting for example: a) Isolation of failures b) For requesting a cleaner tape c) Marking a media as degraded d) Predictive Maintenance - Should have redundant power supplies and Indian standard power cords. - Library should be supplied with rack mount rail kits b 6GB SAS Card 2 nos. 6/13

7 c iscsi to SAS Bridge Controller Card, 1x single end to dual end cable 1 no. d LTO5 cleaning cartridges : Make: SONY/Fujitsu/HP 1 No e LTO5 Media Cartridges : Make: SONY/Fujitsu/HP 30 nos. f Warranty: Comprehensive onsite warranty for 1 year from date of implementation 1 no Backup Software Specification 1 The proposed backup solution should offer user friendly CPU independent Licensing for Backup server/clients/agents meaning no of CPU s configured on the servers should not have any bearing on the cost. All backup/restore administration must be controlled by a master server. 2 The master server must support Linux (x86 x64) operating systems. 3 Master system must maintain a database for all backup/restore meta-data and it should reconstruct against any corruption 4 Proposed solution must support Windows, Linux, Unix and Mac OS X operating systems. All client licenses offered should support heterogeneous operating systems. 5 The software must be based on Graphical User Interface (GUI) so that all backup servers can be managed centrally, regardless of location 6 The proposed backup solution must be able to support raw device backup on both Windows, and Linux. 7 The proposed backup solution must be able to support consolidated backup for file system data on all platforms. 8 The proposed backup solution should be modular in architecture, allowing for components to be added and removed without requiring the backup system to be shutdown. 9 The proposed backup solution shall support disk-based backup (Virtual Tape Library) solution. It should be part of proposed backup software itself, not a separate hardware or software solution. It should work independent of tape emulation. 10 Disk-based backup must provide all the functionalities of tape backup, i.e., adding devices, sharing devices, job schedule, backup retention, etc. 11 Disk-based backup solution must support Fibre Channel, SCSi and iscsi interfaces. It should also support NDMP, Lan-based as well as LAN-free backup. 12 The proposed backup solution should support automatic robotic/tape drive configuration. No scripting is required. 13 The proposed backup solution should have the ability to configure automated backups for specific days and weeks within a month. 14 The proposed Backup solution should be configured in such a fashion that no extra license for Client and media servers is required while moving from LAN to SAN based backup. 15 The proposed backup solution shall be offered with unlimited client server and Media server for SAN based backup and LAN based backup. 16 The proposed solution should support NDMP Backup as well as LAN-based and LANfree backup 7/13

8 17 The solution should support full 5-way NDMP backup 18 The proposed solution should support NDMP protocol 3 & 4 19 The proposed solution should support DAR (Direct Access Restore) Backup and Restore 20 The solution should have the ability to backup normal clients on Network to Tape Devices connected to NAS filers 21 The solution should dynamically support sharing of Tape Devices between NAS box/s, LAN and SAN hosts 22 The proposed solution must not warrant dedicating Tape Devices for NDMP backup 23 The solution must provide online backup facility for popular databases like Oracle, MS- SQL, MySQL, PostgreSQL on windows, Linux, and UNIX platforms 24 The solution must provide Automated Online as well as RMAN backup for Oracle database. It should provide Full, differential, and cumulative incremental backup while data is online with protection down to the data file level 25 The solution should support point-and-click complete recovery and point-in-time recovery based on time, SCN and log sequence number. It should be able to restore readonly files when needed as well as flexible restoration of complete databases, individual table spaces or individual data files should be available 26 Proposed solution must support at least 2TB of source volume with all the above features. 27 The proposed backup solution should support extensive reporting capabilities, like, Backup job completion, job failure, client status, historic jobs by date and size, media utilization, etc. 28 The proposed Backup solution should meet the following Media Management capabilities a. Allow tape library sharing among media servers b. Allow individual tape drive sharing among media servers and allow for reconfiguration without rebooting media servers c. Tape drive sharing must support both SCSI and Fiber based connections. 29 Tape media scanning should be quick and easy to perform to rebuild a lost index or reimport a tape with older backup data. 30 Backup Index /file catalogue should be able to be taken offline and then compressed. 31 Able to compress the index files automatically or by policy. 32 Able to import/scan the indexes using GUI X 7 support for 1 year Scope of Work: Assembling of the hardware accessories Rack mounting Connecting the Servers, SAN switches to the storage Array Connecting the storage array to internal network 8/13

9 Trunking of the network cards on storage & internal network ports Software installation & configuration RAID configuration LUN creation & Allocation Integration of whole hardware as per DRDL s need Assembling of Tape Library Accessories Rack Mounting of the Tape Library Connecting the Tape Library to SAN Switches Tape Drive Configuration Insertion of Tapes into respective slots with barcode labels HA Configuration in drives Installation into HP BL460C Servers and other Servers Failover configuration between Switches Connectivity between Tape Library to Switches Integration with DRDL Network Backup software installation and configuration Backup policy configuration Database agents installation and configuration Client agents installation and configuration Connectivity between backup server to Tape Library Demonstration of all backup features from the existing server, recovery and restoration of data from database as well as file system On-site Engineer should have the skills and minimum of 1 year experience in enterprise environment of maintaining the SAN/NAS Storage, Tape Library, Backup Software and trouble shooting Vendor has to give hands-on-training for 5 people on the supplied hardware and software at DRDL premises 9/13

10 Warrantee will start after successful implementation of supplied hardware and software Payment will be made only after successful installation, demonstration of all features, training, documentation of the total setup and roll out of the project Vendor s Responsibility Vendor should quote and supply reputed brand and latest technology of Computer Storage Solution Vendor should have experience in installation of 3 numbers of Computer Storage Solution with capacity of 100TB in Government and Public Sectors Vendor should provide Storage Engineer (L1) for one year to maintain the whole setup Vendor should submit AMC value for 2 nd and 3 rd year Vendor should provide training for the complete solution to the internal IT team Vendor should install, implement and document the proposed Computer Storage Solution as per DRDL instruction. Vendor should submit specification compliance sheet along with the offer Vendor should submit authorization letter from the OEM for this offer Acceptance Test Procedure (ATP) Storage S. No. Features Compliance (Yes/No) 1 Systems hardware/features will be verified against the tender specification 2 Vendor should install the supplied computer storage solution and integrate with existing infrastructure. Installed Firmware will be checked with latest release firmware. 3 Vendor should demonstrate the functionality of the storage solution like 10/13

11 RAID, Hot Spare, De-duplication, Thin provisioning and Snap shot 4 Vendor should demonstrate the performance monitoring of implemented solution 5 Vendor should demonstrate easy of using the single Web based GUI console for management of the entire Storage solution 6 Vendor should demonstrate Volume expansion on the fly Ethernet L2 Switch S. No. Features Compliance (Yes/No) 1 Systems hardware/features will be verified against the tender specification 2 Vendor should install the supplied Ethernet L2 Switch and integrate with existing network. Installed Firmware will be checked with latest release firmware. 3 Vendor should demonstrate CLI and GUI Capability of the Ethernet L2 Switch 4 Vendor should demonstrate the Ethernet switch features like VLAN, DHCP, Port Trunking, Port Aggregation, MAC Address Binding, STRG and IGMP SAN Switch S. No. Features Compliance (Yes/No) 11/13

12 1 Systems hardware/features will be verified against the tender specification 2 Vendor should install the supplied SAN Switch and integrate with existing Servers. Installed Firmware will be checked with latest release firmware. 3 Vendor should demonstrate CLI and GUI Capability of the SAN Switch 4 Vendor should demonstrate the software features like Web Tool, Advance Zoning, Full Fabric and Enhanced Group Management Tape Library Hardware S. No. Features Compliance (Yes/No) 1 Systems hardware/features will be verified against the tender specification 2 Vendor should install the supplied Tape Library Hardware and integrate with existing back up Servers. Installed Firmware will be checked with latest release firmware. Vendor should demonstrate the functionality of the Tape Library Hardware like - Logical Library and Password Protection 3 Vendor should demonstrate Web Based Remote Management capabilities 4 Vendor should demonstrate preventive diagnostic report Backup Software S. No. Features Compliance (Yes/No) 12/13

13 1 Backup Software features will be verified against the tender specification 2 Vendor should install the supplied Backup Software and integrate with existing back up Servers and Tape Library. 3 Vendor should demonstrate the functionality of the Backup Software features like - LAN Based and NDMP Backup 4 Vendor should demonstrate the functionality of the Backup Software features like - Full Backup, Incremental and Differential Backup 5 Vendor should demonstrate the functionality of the Backup Software features like - Capacity based Licensing 6 Vendor should demonstrate the functionality of the Backup Software facility for ORACLE, MSSQL and MySQL on Windows and Linux platform 7 Vendor should demonstrate GUI based interface for manageability of the Backup software 13/13