Test Method Unit Average result

Transcription

1 SEMI-SYNTHETIC is an advanced engine oil on a synthetic base, specially designed for the lubrication of four stroke petrol and diesel, including diesel engines with direct injection, such as Common Rail, HDI, CDI, etc. The use of components of very high quality shows this oil has a high fluidity low temperature and a stable viscosity at high temperature. Its low ash formulation is associated with a high resistance to aging. meets the following specifications: ACEA A3/B3 API SL/CF VW / MB APPLICATIONS : This oil is used for the majority of petrol engines and diesel engines, both with normal suction as supercharged. It is especially recommended for diesel engines with direct injection. The excellent viscosity can be used all year round. TYPICAL CHARACTERISTICS : Test Method Unit Average result SAE-class Density at 15 C D4052 kg/m Viscosity at 40 C D445 cst 91 Viscosity at 100 C D445 cst 13,7 Viscosity at -25 C D5293 cp 6700 Viscosity index D Flash point COC D92 C 220 Pour point D6892 C -39 TBN D2896 gkoh/kg 8,2 Sulfaatasgehalte D874 massa % 1,0 We reserve the right to alter the general characteristics of our products in order to let our customers benefit of the latest technical evolutions. TECHNO CAR PRODUCTS Zadelmakersstraat 22, 8601 WH Sneek HOLLAND Tel.: +31 (

2 SEMI-SYNTHETIC Safety Data Sheet according to Regulation (EC No. 453/2010 Revision date: 30/12/2011 Supersedes: 11/08/2011 Version: 7.0 SECTION 1: Identification of the substance/mixture and of the company/undertaking 1.1. Product identifier Product form Product name. : Mixture : SEMI-SYNTHETIC Product group : Blend 1.2. Relevant identified uses of the substance or mixture and uses advised against Relevant identified uses Main use category Industrial/Professional use spec. Function or use category : Industrial use,professional use,consumer use : Non-dispersive use Used in closed systems : Lubricants and additives Uses advised against 1.3. Details of the supplier of the safety data sheet TECHNO CAR PRODUCTS Zadelmakersstraat WH Sneek HOLLAND T 0031 ( SECTION 2: Hazards identification 2.1. Classification of the substance or mixture Classification according to Directive 67/548/EEC or 1999/45/EC Not classified Adverse physicochemical, human health and environmental effects 2.2. Label elements Labelling according to Directive 67/548/EEC or 1999/45/EC No labelling applicable 2.3. Other hazards SECTION 3: Composition/information on ingredients 3.1. Substances Not applicable 3.2. Mixtures Name Product identifier % Classification according to Directive 67/548/EEC Zinc dialkyl dithiophosphate (CAS No ,5-1,5 Xi; N; R /53 (EC index no Organomolybdenum amide 0,1-0,75 N; R51/53 Name Product identifier % Classification according to Regulation (EC No. 1272/2008 [CLP] Zinc dialkyl dithiophosphate (CAS No (EC index no ,5-1,5 Eye Dam. 1, H318 Skin Irrit. 2, H315 Aquatic Chronic 2, H411 Organomolybdenum amide 0,1-0,75 Aquatic Chronic 2, H411 Full text of R-, H- and EUH-phrases: see section 16. 1/5

3 according to Regulation (EC No. 453/2010 SECTION 4: First aid measures 4.1. Description of first aid measures First-aid measures after inhalation First-aid measures after skin contact First-aid measures after eye contact First-aid measures after ingestion : Not expected to require first aid measures. : Wash skin with mild soap and water Most important symptoms and effects, both acute and delayed Symptoms/injuries after inhalation Symptoms/injuries after skin contact Symptoms/injuries after eye contact Symptoms/injuries after ingestion : In case of eye contact, immediately rinse with clean water for minutes. : Do not induce vomiting. Rinse mouth. Get immediate medical advice/attention Indication of any immediate medical attention and special treatment needed SECTION 5: Firefighting measures 5.1. Extinguishing media Suitable extinguishing media Unsuitable extinguishing media 5.2. Special hazards arising from the substance or mixture Reactivity 5.3. Advice for firefighters Precautionary measures fire Firefighting instructions Protection during firefighting SECTION 6: Accidental release measures : Not expected to present a significant inhalation hazard under anticipated conditions of normal use. : Not expected to present a significant skin hazard under anticipated conditions of normal use. : Not expected to present a significant eye contact hazard under anticipated conditions of normal use. : Not expected to present a significant ingestion hazard under anticipated conditions of normal use. : Water fog. Foam. Powder. Dry chemical. : Do not use a heavy water stream. : None under normal conditions. : Exercise caution when fighting any chemical fire. : Use water spray or fog for cooling exposed containers Personal precautions, protective equipment and emergency procedures For non-emergency personnel Protective equipment For emergency responders Protective equipment 6.2. Environmental precautions : Do not enter fire area without proper protective equipment, including respiratory protection. : Wear suitable protective clothing and gloves. : Wear suitable protective clothing and gloves. Prevent entry to sewers and public waters. Notify authorities if product enters sewers or public waters Methods and material for containment and cleaning up For containment Methods for cleaning up Other information 6.4. Reference to other sections SECTION 7: Handling and storage 7.1. Precautions for safe handling Precautions for safe handling Handling temperature : < 40 C Hygiene measures 7.2. Conditions for safe storage, including any incompatibilities Storage temperature : < 40 C Storage area 7.3. Specific end use(s : Impound and recover large spill by mixing it with inert granular solids. : Detergent. Take up liquid spill into absorbent material sand, saw dust, kieselguhr. : Spill area may be slippery. Use suitable disposal containers. : Avoid all unnecessary exposure. Both local exhaust and general room ventilation are usually required. : Wash hands and other exposed areas with mild soap and water before eat, drink or smoke and when leaving work. : Store in dry, cool, well-ventilated area. 2/5

4 according to Regulation (EC No. 453/2010 SECTION 8: Exposure controls/personal protection 8.1. Control parameters Additional information 8.2. Exposure controls Personal protective equipment : 5 mg/m3 for oil mists (TWA, 8h-workday recommended, based upon the ACGIH TLV (Analysis according to US NIOSH Method 5026, NIOSH Manual of Analytical Methods, 3rd Edition. : Safety glasses. Gloves. Hand protection Skin and body protection Respiratory protection : Wear suitable gloves resistant to chemical penetration. : No special clothing/skin protection equipment is recommended under normal conditions of use. : No special respiratory protection equipment is recommended under normal conditions of use with adequate ventilation. SECTION 9: Physical and chemical properties 9.1. Information on basic physical and chemical properties Physical state : Liquid Appearance : Oily liquid. Colour : Yellow-brown. Odour : Characteristic. Odour threshold ph Melting point Solidification point Boiling point Flash point : > 200 ASTM D92 Relative evaporation rate (butylacetate=1 Flammability (solid, gas Explosive limits Vapour pressure Relative vapour density at 20 C Relative density Density : 872 C Solubility : Slightly soluble, the product remains on the water surface. Log Pow Log Kow Self ignition temperature Decomposition temperature Viscosity, kinematic : C Viscosity, dynamic Explosive properties Oxidising properties 9.2. Other information SECTION 10: Stability and reactivity Reactivity None under normal conditions Chemical stability Stable under normal conditions Possibility of hazardous reactions None under normal conditions Conditions to avoid No data available. 3/5

5 according to Regulation (EC No. 453/ Incompatible materials Strong oxidizers. acids. Bases Hazardous decomposition products None under normal conditions. SECTION 11: Toxicological information Information on toxicological effects Acute toxicity Irritation Corrosivity Sensitisation Repeated dose toxicity Carcinogenicity Mutagenicity Reproductive toxicity SECTION 12: Ecological information Toxicity Persistence and degradability SEMI-SYNTHETIC Persistence and degradability Not soluble in water, so only minimally biodegradable Bioaccumulative potential Mobility in soil Results of PBT and vpvb assessment Other adverse effects SECTION 13: Disposal considerations Waste treatment methods Additional information : Dispose in a safe manner in accordance with local/national regulations. SECTION 14: Transport information No dangerous good in sense of transport regulations. SECTION 15: Regulatory information Safety, health and environmental regulations/legislation specific for the substance or mixture EU-Regulations No Annex XVII restrictions Contains no REACH candidate substance National regulations Chemical safety assessment SECTION 16: Other information Other information : The information in this SDS was obtained from sources which we believe are reliable. However, the information is provided without any warranty, express or implied, regarding its correctness. The conditions or methods of handling, storage, use or disposal of the product are beyond our control and may be beyond our knowledge. For this and other reasons, we do not assume responsibility and expressly disclaim liability for loss, damage or expense arising out of or in any way connected with the handling, storage, use or disposal of the product. This MSDS was prepared and is to be used only for this product. If the product is used as a component in another product, this MSDS information may not be applicable. 4/5

6 according to Regulation (EC No. 453/2010 Full text of R-, H- and EUH-phrases: Aquatic Chronic 2 Hazardous to the aquatic environment - Chronic Hazard Category 2 Eye Dam. 1 Serious eye damage/eye irritation Category 1 Skin Irrit. 2 skin corrosion/irritation Category 2 H315 Causes skin irritation H318 Causes serious eye damage H411 Toxic to aquatic life with long lasting effects R51/53 Toxic to aquatic organisms, may cause long-term adverse effects in the aquatic environment. N Dangerous for the environment Xi Irritant SDS EU (REACH Annex II This information is based on our current knowledge and is intended to describe the product for the purposes of health, safety and environmental requirements only. It should not therefore be construed as guaranteeing any specific property of the product. 5/5