Spherical Roller Thrust Bearings

Size: px
Start display at page:

Download "Spherical Roller Thrust Bearings"

Transcription

1 Spherical Roller Thrust Bearings

2 High Capacity and Quiet Operation Spherical Roller Thrust Bearings EX Type 1

3 High Capacity Using large rollers results in higher Dynamic Load Rating. Quiet Operation Improving internal parts quality, NACHI achieves lower noise level and 50% reductions in vibration. Operating Temperature The newly developed standard heat stablization treatment process allows NACHI EX-Type Spherical Roller Thrust Bearings to be used under high operating temperature with minimal dimensional changes. Low Heat Generation NACHI developed the R-shaped pressed steel cage, which maximizes lubrication flow. The new cage helps reduce heat generation and extends the permissible speed

4 High Capacity and Quiet Operation Spherical Roller Thrust Bearings EX Type Greater load carrying capacity To obtain maximum capacity of basic dynamic carrying load in the dimensionally restricted section, the diameter, quantity and effective length of roller has been maximized. The stress is distributed equally along the contact areas of outer ring/roller and inner ring /roller due to a optimized internal design. Due to the above improvements, bearing life has been increased by 1.5~.0 times that of NACHI conventional E-Type. Achievement of Quiet Operation Improving internal parts quality, NACHI achieves lower noise level and 50% reductions in vibration. EX-Type Conventional E-Type Vibration Level Conventional E-Type EX-Type

5 Low heat generation even during the high speed operation In order to maximize a lubrication flow, NACHI developed R shape pressed steel cage. Most of the heat generated is caused by the sliding motion between inner ring flange and roller end at high speed operation. NACHI analyzes this critical area by using Hertz & Lubrication theory and have optimized the design to reduce heat build up. Due to the above improvements, the heat generation of EX-Type bearings can be reduced by over 10% and the permissible speed can be extended by over 10% compared with the conventional design. High Speed Rotating Test The above test results show that the high speed capability of EX-series bearings have improved. 00 Temperature Rise of Outer Ring ( C) NACHI EX Conv. Design 1 Conv. Design Fa=7kN Fa=.7kN

6 High Capacity and Quiet Operation Spherical Roller Thrust Bearings EX Type C d 1 Dynamic equivalent axial load d Pa=Fa+1.Fr r Static equivalent axial load Poa=Fa+.7Fr d b1 where, Fa : Axial load Fr : Radial load r D 1 d a Fr However = < 0.55 must be Fa satisfied D In case of applied radial load, not exceed 50% of axial load. B B1 A T r a 0 d b r a D a 900EX Series 1N=0.10kgf Bearing No. 917EX 918EX 90EX 9EX 9EX 96EX 98EX 9EX d Boundary dimensions (mm) D T r (min) Basic dynamic load rating Ca (N) Basic static load rating Coa (N) Grease lubrication Oil lubrication 900EX Series 5 Bearing No. 91EX 91EX 91EX 915EX 916EX 917EX 918EX 90EX 9EX 9EX 96EX 98EX 90EX 9EX d Boundary dimensions (mm) r (min) Note: For heavy load application, da should be large enough to support the shaft washer rib. D T Basic dynamic load rating Ca (N) 50,000 10,000 90,000 55, ,000 60, , ,000 1,060,000 1,10,000 1,00,000 1,10,000 1,60,000 1,80,000 Basic static load rating Coa (N) 915,000 1,110,000 1,50,000 1,70,000 1,60,000 1,810,000,080,000,50,000,150,000,750,000,00,000,50,000 5,150,000 5,750,000 Grease lubrication 1,800 1,700 1,600 1,600 1,500 1,00 1,00 1, Oil lubrication,800,700,00,00,100,000 1,900 1,700 1,500 1,00 1,00 1,00 1,100 1,000

7 Because there are many sliding surfaces in Spherical Roller Thrust Bearings (cage-to-guide-sleeve and roller-ends-to-rib), oil lubricant (not grease) should be used. Aligning angle Maximum permissible misalignment angle is about The safty-facter "So" must be over. Minimum axial load To prevent damage caused by sliding motion between the rollers and raceway, spherical roller thrust bearings must be subjected to a load more than the minimum load, Fa min. Fa min= Coa 1000 d 1 D 1 B B 1 C A Abutment and fillet dimensions (mm) da (min) Da ra Spacer dimensions (mm) db1 db Mass (kg) Bearing No. 917EX 918EX 90EX 9EX 9EX 96EX 98EX 9EX d D 1 B B 1 C A Abutment and fillet dimensions (mm) da (min) Da ra Spacer dimensions (mm) db db Mass (kg) Bearing No. 91EX 91EX 91EX 915EX 916EX 917EX 918EX 90EX 9EX 9EX 96EX 98EX 90EX 9EX 6

8 Main Office: Shiodome Sumitomo Bldg. 17F, 1-9- Higashi-Shinbashi, Minato-ku, Tokyo , JAPAN Phone: Fax URL: Overseas Sales Companies NACHI AMERICA INC. HEADQUARTERS Twenty-Three Mile Road, Macomb, Michigan, 80, U.S.A. Phone: Fax URL: INDIANA BRANCH 715 Pushville Road, Greenwood, Indiana, 61, U.S.A. Phone: Fax WEST COAST BRANCH 165 E. AIondra Blvd. Cerritos, California, 9070, U.S.A. Phone: Fax MIAMI BRANCH-LATIN AMERICA DIV. 15 N.W. 107th Ave., Doral, Florida, 17, U.S.A. Phone: /0059/60 Fax ATLANTA OFFICE Six Concourse Parkway, Suite 995 Atlanta, GA 08, U.S.A. Phone: Fax NACHI ROBOTIC SYSTEMS INC. 85 Roethel Drive, Novi, Michigan, 875,U.S.A. Phone: Fax URL: NACHI CANADA INC. 89 Courtland Ave., Unit No., Concord, Ontario, LK T, CANADA Phone: Fax URL: NACHI MEXICANA, S.A. DE C.V. Gral. Mariano Arista No.5, Local 5, Col. Argentina C.P. 110, Mexico D.F. MEXICO Phone: Fax NACHI EUROPE GmbH Bischofstrasse 99, 7809, Krefeld, GERMANY Phone: +9-(0) Fax. +9-(0) URL: SPAIN BRANCH Av. Alberto Alcocer 8, 1-A, 806, Madrid, SPAIN Phone: +-(0) Fax. +-(0) BARCELONA OFFICE Josep Tarradellas, 58, 1-5, 0809 Barcerona, SPAIN Phone: +-(0) Fax. +-(0) CZECH BRANCH Mostni 7, kolin, 800, CZECH Phone: Fax U.K. BRANCH Unit 7, Junction Six Industrial Estate, Electric Avenue, Birmingham B6 7JJ, U.K. Phone: +-(0) Fax. +-(0) NACHI-FUJIKOSHI CORP. ITALY REPRESENTATIVE OFFICE Via delle Lame 75, piano-interno 8 01, Bologna, ITALY Phone: Fax NACHI-FUJIKOSHI CORP. THAILAND REPRESENTATIVE OFFICE Chai-ho Wongwaiwat Bldg. 889 Srinakarin Road, Samutprakarn, THAILAND 1070 Phone: ~ Fax NACHI SINGAPORE PTE. LTD. No. Joo Koon Way, Jurong Town, Singapore 689, SINGAPORE Phone: Fax VIETNAM OFFICE Room 1608, 16/F Saigon Tower 9 Le Duan Street, District 1, Ho Chi Minh City, VIETNAM Phone: Fax FUJIKOSHI-NACHI (MALAYSIA) SDN. BHD. No.17, Jalan USJ 1/, 760 UEP Subang Jaya, Selangor Darul Ehsan, MALAYSIA Phone: +60-(0) Fax. +60-(0) P.T.NACHI INDONESIA JI.H.R.Rasuna Said Kav.X-O Kuningan,Jakarta 1950, INDONESIA Phone: Fax NACHI PILIPINAS INDUSTRIES, INC. 1st Avenue, Manalac Compound, Sta. Maria Industrial Estate, Bagumbayan, Taguig, Metro Manila, PHILIPPINES Phone: +6-(0) Fax. +6-(0)-88-6 MANILA OFFICE Km East Service Road, Capang Muntinlupa, City Metro Manila, PHILIPPINES Phone: +6-(0) Fax. +6-(0) NACHI (SHANGHAI) CO., LTD. Rm No.160, Ocean Towers No. 550, Yanan Road.E. Huangpu District, Shanghai 00001, CHINA Phone: +86-(0) Fax. +86-(0) NACHI-FUJIKOSHI CORP. TAIPEI REPRESENTATIVE OFFICE F No.76, Sec, Chung Ching N. Road, Taipei, TAIWAN Phone: +886-(0) Fax (0) NACHI-FUJIKOSHI CORP. KOREA REPRESENTATIVE OFFICE F Dongsan Bldg. 76-, Sungsu GA-DONG Sungdong-Ku. Seoul 1-1, KOREA Phone: +8-(0)-69-5 Fax. +8-(0)-69-6 NACHI (AUSTRALIA) PTY. LTD. Unit 1, -9 South Street, Rydalmere, N.S.W, 116, AUSTRALIA Phone: +61-(0) Fax. +61-(0) URL: Overseas Manufacturing Companies NACHI TECHNOLOGY INC. 71 Pushville Road, Greenwood, Indiana, 61,U.S.A. Phone: Fax URL: NACHI MACHINING TECHNOLOGY CO Twenty-three Mile Road, Macomb, Michigan, 80, U.S.A. Phone: Fax URL: NACHI BRASIL LTDA. Avenida João XX III, No.0, Jardim São Pedro, Mogi das Cruzes, S.P., BRAZIL, CEP Phone: Fax URL: NACHl INDUSTRIAL, S.A. Poligono Industrial, El Montalvo, Parcelas 7 y 75, 7080 Salamanca, SPAIN Phone: +-(0) Fax. +-(0) NACHI CZECH S.R.O Prumyslova 7, 0 01 Louny, CZECH Phone: Fax NACHI TECHNOLOGY (THAILAND) CO., LTD. /16 M,, Rojana Industrial Estate Nongbua, Ban Khai, Rayong, 110, THAILAND Phone: Fax NACHI INDUSTRIES PTE. LTD. No. Joo Koon Way, Jurong Town, Singapore 689, SINGAPORE Phone: Fax URL: NACHI C.Y. CORP. No.109, Kao Young North Rd, Lung-Tan Hsin, Tao-Yuan Hsien, TAIWAN Phone: +886-(0)-7l-7651 Fax (0) DONGGUAN NACHI C.Y. CORPORATION Dangyong Village, Hongmei Town Dongguan City, Guangdong, CHINA Phone: +86-(0) Fax. +86-(0) SHANGHAI NACHI BEARINGS CO., LTD. 58, Fengmao Rd. Malu Town, Jiading, Shanghai, CHINA Phone: +86-(0) Fax. +86-(0) DAESUNG-NACHI HYDRAULICS CO., LTD. 89-, Yousan-Dong, Yangsan-Si Kyungnam , KOREA Phone: +8-(0) ~ Fax. +8-(0) The appearance and specifications may be changed without prior notice if required to improve performance. Every care has been taken to ensure the accuracy of the information contained in this catalog but no liability can be accepted for any errors or omissions. CATALOG NO. B10E Printed in Japan 006..V-MIZUNO

DuPont Freon REFRIGERANTS

DuPont Freon REFRIGERANTS DuPont Freon REFRIGERANTS Technical Information T-12 SI Thermodynamic Properties of DuPont Freon 12 (R-12) Refrigerant Thermodynamic Properties of DuPont Freon 12 (R12) SI Units Tables of the thermodynamic

More information

NSK representative office Manila tel: 02-759-6246

NSK representative office Manila tel: 02-759-6246 Worldwide Sales Offices NSK Ltd.-Headquarters, Tokyo, Japan www.nsk.com Americas & Europe Department tel: 03-3779-7120 Asia Marketing & Sales Department tel: 03-3779-7121 Africa South Africa: NSK South

More information

Silicon Planar Zener Diode for Surge Absorption and Stabilizer

Silicon Planar Zener Diode for Surge Absorption and Stabilizer Silicon Planar Zener Diode for Surge Absorption and Stabilizer Features These diodes are delivered taped. Ultra small Resin Package (URP) is suitable for surface mount design. Ordering Information REJ3G1512-2

More information

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN IWAKI MAGNETIC DRIVE PUMPS Patent & Pat.Pend. JAPAN / U.S.A. / EU / CHINA / TAIWAN Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made

More information

ZKL Bearings for Railway Rolling Stock

ZKL Bearings for Railway Rolling Stock 2 ZKL Bearings for Railway Rolling Stock ZKL Bearings for Railway Rolling Stock Railway industry is a very prospective sector worldwide and therefore ZKL pays particular attention to bearings for railway

More information

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA

IWAKI MAGNETIC DRIVE PUMPS MDM. Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA IWAKI MAGNETIC DRIVE PUMPS Patent JAPAN / U.S.A. / TAIWAN / EU / CHINA Magnetic drive process pump resistant to dry run damage The Series of Magnetic drive process pumps have wetted parts made of fluororesin.

More information

Sales contacts by country A - B

Sales contacts by country A - B Sales contacts by country A - B Angola +33 1 41 35 32 64 rm.lubmarine-order@total.com Australia Brazil TOTAL LUBRICANTS USA, INC. 5 North Stiles Street LINDEN NJ +507 6619 86 09 (Commercial issues) Argentina

More information

Max. Allowable Load / Runout for motor shaft

Max. Allowable Load / Runout for motor shaft Max. Allowable Load / Runout for motor shaft 1 2 3 HIGH TORQUE, LOW VIBRATION AND LOW NOISE 4 5 HIGH TORQUE, LOW VIBRATION AND LOW NOISE 6 7 HIGH TORQUE, LOW VIBRATION AND LOW NOISE 8 9 HIGH TORQUE, LOW

More information

Rod End General Catalog

Rod End General Catalog General Catalog A Product Descriptions Features and Types... A23-2 Features of the... A23-2 Features... A23-2 Types of the... A23-3 Types and Features... A23-3 Point of Selection... A23-5 Selecting a...

More information

DuPont Suva REFRIGERANTS. Using the Pressure Enthalpy Diagram. The PH Diagram

DuPont Suva REFRIGERANTS. Using the Pressure Enthalpy Diagram. The PH Diagram DuPont Suva REFRIGERANTS Technical Information Using the Pressure Enthalpy Diagram The PH Diagram This paper is for general purpose information only. For detailed engineering data always refer to specific

More information

Cross-Roller Ring Series

Cross-Roller Ring Series Cross-Roller Ring Series Compact, Highly Rigid Swivel Bearings Achieving a Superb Rotation Accuracy For details, visit THK at www.thk.com Product information is updated regularly on the THK website. CATALOG

More information

Eaton Heat Containment System (HCS) Chimney. Installation Guide

Eaton Heat Containment System (HCS) Chimney. Installation Guide Eaton Heat Containment System (HCS) Chimney Installation Guide Copyright 2011 Eaton Corporation, Worcester, MA, USA. All rights reserved. Information in this document is subject to change without notice.

More information

Customer Service Documentation. Support and Escalation Contacts by Country

Customer Service Documentation. Support and Escalation Contacts by Country Support and Escalation Contacts by Country V 1.16 April 23 2015 Note: Information in this document is subject to change without notice. Oracle makes no warranty of any kind with regard to this material,

More information

CERTIFICATE ISO/TS 16949:2009. STMicroelectronics Tours. DEKRA Certification GmbH certifies that the company

CERTIFICATE ISO/TS 16949:2009. STMicroelectronics Tours. DEKRA Certification GmbH certifies that the company CERTIFICATE ISO/TS 16949:2009 DEKRA Certification GmbH certifies that the company STMicroelectronics Tours Scope of certification: Design and manufacturing of semiconductor products With 7.3 Product Development.

More information

Self-aligning ball bearings

Self-aligning ball bearings Self-aligning ball bearings Designs... 470 Basic design... 470 Sealed bearings... 470 Bearings with an extended inner ring... 472 Bearings on sleeves... 473 Self-aligning ball bearing kits... 474 Appropriate

More information

Accuracy counts! SENSORS WITH ANALOG OUTPUT

Accuracy counts! SENSORS WITH ANALOG OUTPUT Accuracy counts! SENSORS WITH ANALOG OUTPUT OTHER APPLICATIONS: KEY ADVANTAGES: Distance measurement Positioning Profile detection Deformation monitoring Vibration monitoring Process monitoring Detection

More information

Remote Desktop Connection

Remote Desktop Connection Technical Note Remote Desktop Connection MS2690A/MS2691A/MS2692A Signal Analyzer Technical Note - Remote Desktop Connection - Anritsu Corporation March 2009 (1.00) Slide 1 Displaying Anritsu Instrument

More information

Customer Impact Report: Paperless Billing and Payment Programs

Customer Impact Report: Paperless Billing and Payment Programs Customer Impact Report: Paperless Billing and Payment Programs L. DENNIS SMITH, DIRECTOR CARL LEPPER, INDUSTRY ANALYST A Special Report by J.D. Power July 2013 A Global Marketing Information Company jdpower.com

More information

Special Rolling Bearings

Special Rolling Bearings Special Rolling Bearings Special Rolling Bearings KINEX produces, except a large number of types and sizes of standardized rolling bearings of both basic and modified designs presented in the preceding

More information

Regional Strategies 82/90

Regional Strategies 82/90 Regional Strategies 82/90 Global Operations NTT Com Group has subsidiaries and offices in 85 cities in 30 countries/regions except Japan, which connect networks to more than 150 countries around the world.

More information

Cylindrical Roller Bearings. High axial load carrying capacity due to optimized rib contact

Cylindrical Roller Bearings. High axial load carrying capacity due to optimized rib contact Cylindrical Roller Bearings High axial load carrying capacity due to optimized rib contact Our Product Range Full complement INA cylindrical roller bearings + FAG cylindrical roller bearings with cages

More information

SECO-CAPTO TOOLHOLDING FOR MAZAK MACHINES

SECO-CAPTO TOOLHOLDING FOR MAZAK MACHINES SECO-CAPTO TOOLHOLDING FOR MAZAK MACHINES OUR EXTENSIVE RANGE Seco Tools are very pleased to launch its first Seco-Capto tool holding catalogue. We have worked in close partnership with Craftsman Tools

More information

NOMURA SINGAPORE LIMITED

NOMURA SINGAPORE LIMITED NOMURA SINGAPORE LIMITED Key Events in Nomura's History 1925 Nomura Holdings, Inc. (formerly known as The Nomura Securities Co., Ltd.) founded in Osaka by Tokushichi Nomura II 1927 Nomura opens an office

More information

INVOICE MAILING ADDRESS

INVOICE MAILING ADDRESS New Legal Entity Name (effective Feb 1, 2015) Invoice To Address Country VAT Number DUNS Number Help-line number Functional Mailbox Trinseo Belgium BVBA Trinseo Deutschland Anlagengesellschaft mbh Trinseo

More information

POWER TRANSMISSION LEADING BY INNOVATION CENTAFLEX -R HIGHLY FLEXIBLE COUPLINGS FOR HEAVY DUTY APPLICATIONS WWW.CENTA.INFO/CF-R CATALOG CF-RS-E-05-08

POWER TRANSMISSION LEADING BY INNOVATION CENTAFLEX -R HIGHLY FLEXIBLE COUPLINGS FOR HEAVY DUTY APPLICATIONS WWW.CENTA.INFO/CF-R CATALOG CF-RS-E-05-08 POWER TRANSMISSION LEADING BY INNOVATION CENTAFLEX -R HIGHLY FLEXIBLE COUPLINGS FOR HEAVY DUTY APPLICATIONS WWW.CENTA.INFO/CF-R CATALOG CF-RS-E-05-08 CENTAFLEX -R Design The CENTAFLEX-R is a simple robust

More information

METROLOGIC INSTRUMENTS, INC. MS1690 Focus Area Imaging Bar Code Scanner Supplemental Configuration Guide

METROLOGIC INSTRUMENTS, INC. MS1690 Focus Area Imaging Bar Code Scanner Supplemental Configuration Guide METROLOGIC INSTRUMENTS, INC. MS1690 Focus Area Imaging Bar Code Scanner Supplemental Configuration Guide Copyright 2005 by Metrologic Instruments, Inc. All rights reserved. No part of this work may be

More information

PM 2 GRUNDFOS INSTRUCTIONS

PM 2 GRUNDFOS INSTRUCTIONS PM GRUNDFOS INSTRUCTIS Max. m. (default) Max. t amb Min. 0 C P start =. bar (default) Max. 0 bar ( ) Min..9 bar (0.9 ) (default) bar Max. t liq Min. 0 C l / = max. 0 A 4 60 6 7 6. bar + 0.. bar + 0. =.

More information

Technical Data. 7. Bearing Fits. 7.1 Interference. 7.2 Calculation of interference F B LLLLLLLLL( A-54

Technical Data. 7. Bearing Fits. 7.1 Interference. 7.2 Calculation of interference F B LLLLLLLLL( A-54 Technical Data 7. Bearing Fits 7.1 Interference For rolling s the rings are fixed on the or in the housing so that slip or movement does not occur between the mated surface during operation or under. This

More information

FEATURES PRODUCT SERIES IP5000/IP5100 HIGH PERFORMANCE POSITIONER COMPACT AND LIGHTWEIGHT RESISTANT TO HOSTILE ENVIRONMENTS DESIGNED TO IP55, NEMA 4

FEATURES PRODUCT SERIES IP5000/IP5100 HIGH PERFORMANCE POSITIONER COMPACT AND LIGHTWEIGHT RESISTANT TO HOSTILE ENVIRONMENTS DESIGNED TO IP55, NEMA 4 PRODUCT FEATURES SERIES IP5000/IP5100 HIGH PERFORMANCE POSITIONER COMPACT AND LIGHTWEIGHT RESISTANT TO HOSTILE ENVIRONMENTS Cross section of the exhaust system. Employs the combination of the check valve

More information

PS-SEAL PTFE based high performance seal

PS-SEAL PTFE based high performance seal PS-SEAL PTFE based high performance seal Advancing the Science of Sealing Advancing the Science of Sealing Table of content PS-SEAL 3 PS-SEAL STANDARD Standard seal in stock 4 PS-SEAL NON-STANDARD Customized

More information

Capabilities Overview

Capabilities Overview SERVICES AND SOLUTIONS Capabilities Overview Asset Management and Optimization Engineering and Technical Services Education and Training Aftermarket Parts and Services Experience In Motion SERVICES AND

More information

Machines. Single Drum Rollers ASC 30/50.

Machines. Single Drum Rollers ASC 30/50. Machines Single Drum Rollers ASC 30/50 www.ammann-group.com ASC 30/50 The basic concept An articulated roller has to fulfil very different applications. Ideal compaction results need to be achieved in

More information

2013.10.1,500 2nd

2013.10.1,500 2nd http://www.aisin.com 203.0.,500 2nd 0 02 Jun., 2002 Mar. 9, 992 Mar. 24, 988 Jul., 99 Jul. 3, 200 Sep., 986 Jun., 949 Dec. 0, 945 May 5, 969 Sep. 30, 953 Mar. 8, 945 Feb. 8, 943 Mar. 29, 943 Aug. 3, 965

More information

FACT SHEET Global Direct Selling

FACT SHEET Global Direct Selling Global 2011 Global Retail Sales: USD $153,727 million Global Sales Force The 91.5 million Direct Sellers who represent companies around the world are: 3 2 16% 9% 2% 3% 2% 3% 2% 3% Care 42% 2% 56% 3% 2

More information

VT-S730. Omron's 3D-SJI For Efficient Manufacturing of High-quality Products. Best Quality @ the Minimum Q cost! PCB Inspection System VT-S730 NEW

VT-S730. Omron's 3D-SJI For Efficient Manufacturing of High-quality Products. Best Quality @ the Minimum Q cost! PCB Inspection System VT-S730 NEW NEW PCB Omron's 3D-SJI For Efficient Manufacturing of High-quality Products STABLE INSPECTION Best Quality @ the Minimum Q cost! VERTICAL START UP Omron's 3D-SJI * * Solder Joint Inspection For Efficient

More information

Management Policies of Nippon Express. March 2007

Management Policies of Nippon Express. March 2007 Management Policies of Nippon Express March 2007 1. Our Group's Business Framework 1. Our Group's Business Framework Nippon Express Group Overseas Japan Asia-Oceania Europe Americas Domestic transport

More information

MTA1 CAN, M1 10Prog CAN, AT1CAN, AT1 CoarseFine CAN, M1, AT1, AT1 CoarseFine, RA 12, RA 23, RA T1, FS 002 CAN, FS 002

MTA1 CAN, M1 10Prog CAN, AT1CAN, AT1 CoarseFine CAN, M1, AT1, AT1 CoarseFine, RA 12, RA 23, RA T1, FS 002 CAN, FS 002 GB MTA1 CAN, M1 10Prog CAN, AT1CAN, AT1 CoarseFine CAN, M1, AT1, AT1 CoarseFine, RA 12, RA 23, RA T1, FS 002 CAN, FS 002 Instruction manual 0459 576 101 GB 090129 Valid for serial no. 506 -xxx -xxxx, 719

More information

VSL GC ANCHORAGE TECHNOLOGY GC ANCHORAGES

VSL GC ANCHORAGE TECHNOLOGY GC ANCHORAGES VSL GC ANCHORAGE TECHNOLOGY GC ANCHORAGES Technical Data Characteristics Applications VSL S LATEST FOR POST-TENSIONING Meets ETAG with proven materials PT-PLUS duct system for enhanced corrosion protection

More information

Always Following the Sun

Always Following the Sun DLR Always Following the Sun Bearing solutions for tracking systems Photovoltaic & Solar Thermal Systems Photovoltaic and solar thermal systems: Improved performance with tracking systems with high-precision

More information

MOLECULAR DRAG PUMPS MDP SERIES

MOLECULAR DRAG PUMPS MDP SERIES MOLECULAR DRAG PUMPS MDP SERIES MOLECULAR DRAG PUMPS MDP SERIES If you need: to replace a rotary vane pump with a dry pump for an application at 10-3 a turbopump that can operate up to 10 a pump that can

More information

Construction (2) Characteristics (2) Rail Type (2) Carriage Type (3) Description of Specification (4) Accuracy Grade (5) Preload Grade (6)

Construction (2) Characteristics (2) Rail Type (2) Carriage Type (3) Description of Specification (4) Accuracy Grade (5) Preload Grade (6) Contents Construction (2) Characteristics (2) Rail Type (2) Carriage Type (3) Description of Specification (4) Accuracy Grade (5) Preload Grade (6) Dust Proof (7) Dimensions of Tapped-hole Rails (8) Rail

More information

DODGE USAF 200/300 Direct Mount Pillow Block Bearings

DODGE USAF 200/300 Direct Mount Pillow Block Bearings DODGE USAF 200/300 Direct Mount Pillow Block Bearings These instructions must be read thoroughly before installation or operation. WARNING: To ensure that drive is not unexpectedly started, turn off and

More information

FAG Mechanical Extractors Technical Information

FAG Mechanical Extractors Technical Information FAG Mechanical Extractors Technical Information A Member of the Schaeffler Group FAG Mechanical Extractors Application Programme Application of extractors Small rolling bearings with bore diameters of

More information

SERIES. LINEAR SERVO DRIVE Linear YASKAWA IRON-CORE FW SGLFW IRON-CORE TW SGLTW SERVO DRIVER SERVOPACK TYPE SGDH LITERATURE NO. KAE-S800-39.

SERIES. LINEAR SERVO DRIVE Linear YASKAWA IRON-CORE FW SGLFW IRON-CORE TW SGLTW SERVO DRIVER SERVOPACK TYPE SGDH LITERATURE NO. KAE-S800-39. LINEAR SERVO DRIVE Linear SERIES LINEAR SERVOMOTOR TYPE CORELESS GWSGLGW IRON-CORE FWSGLFW IRON-CORE TWSGLTW SERVO DRIVERSERVOPACKTYPE SGDH YASKAWA Certified for ISO9001 and ISO14001 JQA-0422 JQA-EM0202

More information

Foreign Taxes Paid and Foreign Source Income INTECH Global Income Managed Volatility Fund

Foreign Taxes Paid and Foreign Source Income INTECH Global Income Managed Volatility Fund Income INTECH Global Income Managed Volatility Fund Australia 0.0066 0.0375 Austria 0.0045 0.0014 Belgium 0.0461 0.0138 Bermuda 0.0000 0.0059 Canada 0.0919 0.0275 Cayman Islands 0.0000 0.0044 China 0.0000

More information

Bank of America Merrill Lynch Banking & Financial Services Conference

Bank of America Merrill Lynch Banking & Financial Services Conference Bank of America Merrill Lynch Banking & Financial Services Conference Manuel Medina Mora Chairman of the Global Consumer Banking Council November 17, 2010 Consumer Banking in Citicorp Agenda Our Business

More information

Certificate of Registration

Certificate of Registration Certificate of Registration Personal Information Management System BS 10012:2009 This is to certify that: SAP SE Dietmar-Hopp-Allee 16 and SAP Deutschland SE & Co. KG Hasso-Plattner-Ring 7 Holds certificate

More information

"Certificate Applicant" means an individual or organization that requests the issuance of a Certificate by a Certification Authority.

Certificate Applicant means an individual or organization that requests the issuance of a Certificate by a Certification Authority. Trend Micro Relying Party Agreement YOU MUST READ THIS RELYING PARTY AGREEMENT ("AGREEMENT") BEFORE RELYING ON ANY IDENTITY INFORMATION IN A TREND MICRO SSL CERTIFICATE, VALIDATING A TREND MICRO SSL CERTIFICATE,

More information

P R E S S R E L E A S E

P R E S S R E L E A S E P R E S S R E L E A S E Contact: Robert McGrath 212.984.8267 robert.mcgrath@cbre.com Corey Mirman 212.984.6542 corey.mirman@cbre.com LONDON IS WORLD S MOST EXPENSIVE OFFICE MARKET FOR SECOND STRAIGHT YEAR

More information

SST 2. Soft starting tool 2. Instruction manual

SST 2. Soft starting tool 2. Instruction manual SST 2 Soft starting tool 2 Instruction manual 0740 800 174 090909 Introduction.................................................................... 3 Connections to / from SST 2.....................................................

More information

Link-OS Printer Operating System Syslog AppNote 2456935.546169 October 5, 2014

Link-OS Printer Operating System Syslog AppNote 2456935.546169 October 5, 2014 Link-OS Printer Operating System Syslog AppNote 2456935.546169 October 5, 2014 INTRODUCTION Syslog is an industry standard device management system for message logging. For a general understanding of syslog,

More information

ZKL- ZRL Praha, a.s. MANUFACTURER OF BALL BEARINGS

ZKL- ZRL Praha, a.s. MANUFACTURER OF BALL BEARINGS ZKL- ZRL Praha, a.s. MANUFACTURER OF BALL BEARINGS CATALOG OF BEARINGS Contents Introduction... 3 Technical Section... 4 Single Row Ball Bearings... 4 Self-Aligning Ball Bearings... 4 Special Ball Bearings...

More information

Measures to Prevent Infringement of Intellectual Property Rights. Initiatives for Strengthening Business Continuity Capabilities

Measures to Prevent Infringement of Intellectual Property Rights. Initiatives for Strengthening Business Continuity Capabilities Measures to Prevent Infringement of Intellectual Property Rights As part of our intellectual property activities, we employ a system to monitor other companies' patents on a daily basis to prevent any

More information

Stainless Linear Motion Rolling Guide series

Stainless Linear Motion Rolling Guide series products are avaiable from: MARYLAND METRICS phones: (410)358-3130 (800)638-1830 faxes: (410)358-3142 (800)872-9329 P.O.Box 261 Owings Mills, MD 21117 USA URL: http://mdmetric.com E-mail: sales@mdmetric.com

More information

be carried out to determine whether the housing connecting bolts and the mounting bolts are still suitable. Torque

be carried out to determine whether the housing connecting bolts and the mounting bolts are still suitable. Torque SD Plummer Block Housings SD Series 31.. + 30.. housings are split plummer blocks for spherical roller bearings with adapter sleeves. They are fitted with labyrinth seals. Housings for shaft ends are supplied

More information

Dimensions Abutment and fillet dimensions Calculation factors

Dimensions Abutment and fillet dimensions Calculation factors C a C a r a r a Da da d a D a r a Dimensions Abutment and fillet dimensions Calculation factors d d 2 D 1 r 1,2 1) s 1 1) s 2 d a d a D a D a 2) C a r a k 1 k 2 ~ ~ min ~ ~ min max min max min max mm mm

More information

Bearing designation is created by numerical and letter symbols indicating the type, size and design of the bearing, see the scheme.

Bearing designation is created by numerical and letter symbols indicating the type, size and design of the bearing, see the scheme. 2.2 Designation Bearing designation is created by numerical and letter symbols indicating the type, size and design of the bearing, see the scheme. In the basic design the bearings are designated by a

More information

1) REMOTE ACCESS TECHNICAL ASSISTANCE FROM APPLE (AS DESCRIBED BELOW UNDER THE HEADING Apple entity by Region/Country of Purchase )

1) REMOTE ACCESS TECHNICAL ASSISTANCE FROM APPLE (AS DESCRIBED BELOW UNDER THE HEADING Apple entity by Region/Country of Purchase ) Terms of Service Americas: REMOTE ACCESS TECHNICAL ASSISTANCE FROM APPLE (AS DESCRIBED BELOW UNDER THE HEADING Apple entity by Region/Country of Purchase ) IS PROVIDED ON THE FOLLOWING BASIS: 1. APPLE

More information

FAG Hydraulic nuts. Technical Product Information

FAG Hydraulic nuts. Technical Product Information FAG Hydraulic nuts Technical Product Information Contents Application 2 Design 2 Design variants 3 Pressure generators, connectors 4 Dimension tables for FAG hydraulic nuts (metric) 6 Dimension tables

More information

For New Technology Network. Steel Manufacturing Machinery Product Guide Book

For New Technology Network. Steel Manufacturing Machinery Product Guide Book For New Technology Network R Steel Manufacturing Machinery Product Guide Book Ecological / Economical proposals from NTN NTN products exhibit benefits at various locations. Steel manufacturing equipment

More information

7.3 Fit selection. Inner ring: Rotating. Outer ring: Stationary. Inner ring: Stationary. Outer ring: Rotating. Inner ring: Stationary

7.3 Fit selection. Inner ring: Rotating. Outer ring: Stationary. Inner ring: Stationary. Outer ring: Rotating. Inner ring: Stationary 7. Bearing Fits 7. Fitting For rolling s, inner and outer rings are fixed on the or in the housing so that relative movement does not occur between fitting surfaces during operation or under. This relative

More information

TECHNO ASSOCIE Corporate Profile

TECHNO ASSOCIE Corporate Profile TECHNO ASSOCIE Corporate Profile Message from the President Focus Both Globally and Locally in Order to Promptly and Accurately Respond to Customer Needs Based on its Corporate Philosophy, the Techno Associe

More information

Always Beside You, Make All Customers Satisfied

Always Beside You, Make All Customers Satisfied Always Beside You, Make All Customers Satisfied Beijing Shenyang Xi an Qingdao Chengdu Wuhan Shanghai Guangzhou Xiamen Branch Offices Distribution Customer Service Center Distribution OMRON INDUSTRIAL

More information

Tax Efficient Supply Chain Management Services

Tax Efficient Supply Chain Management Services ASIA PACIFIC Tax Efficient Supply Chain Management Services Helping Global Companies Achieve Enterprise-wide Efficiencies TAX 2008 KPMG International. KPMG International is a Swiss cooperative. Member

More information

CNC TURRET PUNCH PRESSES STRIPPIT P-SERIES

CNC TURRET PUNCH PRESSES STRIPPIT P-SERIES CNC TURRET PUNCH PRESSES STRIPPIT P-SERIES S T R I P P I T P - S E R I E S Efficient & Productive L VD Strippit s P-Series CNC turret punch presses offer a high level of efficiency and productivity in

More information

THERMAL ANALYSIS. Measurement for Transition Heat of Plastics. - According to JIS K 7121-1987 -

THERMAL ANALYSIS. Measurement for Transition Heat of Plastics. - According to JIS K 7121-1987 - Page 1 of 7 THERMAL ANALYSIS T91 Measurement for Transition Heat of Plastics - According to JIS K 7121-1987 - Heat characteristics of high polymers, such as transition and decomposition, are measured by

More information

Roxtec EzEntry TM. Seals for cabinets and enclosures Designed to simplify cable sealing. We Seal Your World

Roxtec EzEntry TM. Seals for cabinets and enclosures Designed to simplify cable sealing. We Seal Your World Roxtec EzEntry TM Seals for cabinets and enclosures Designed to simplify cable sealing We Seal Your World Cable entries made easy The new Roxtec EzEntry TM makes cable sealing easy. You can install and

More information

SQS herewith certifies that the company named below has a management system which meets the requirements of the normative base specified below.

SQS herewith certifies that the company named below has a management system which meets the requirements of the normative base specified below. Certificate SQS herewith certifies that the company named below has a management system which meets the requirements of the normative base specified below. ISO 9001:2008 Certified area inclusive subsidiaries

More information

Schedule 2- List of Affiliates which have signed or are due to sign an agreement in the form of this Agreement (Intra-Group Agreement)

Schedule 2- List of Affiliates which have signed or are due to sign an agreement in the form of this Agreement (Intra-Group Agreement) Schedule 2- List of Affiliates which have signed or are due to sign an agreement in the form of this Agreement (Intra-Group Agreement) Name of Subsidiary Jurisdiction of Incorporation Administradora de

More information

Radial Insert Ball Bearings Housing Units. Our Expertise is Your Benefit. Schaeffler Group Industrial

Radial Insert Ball Bearings Housing Units. Our Expertise is Your Benefit. Schaeffler Group Industrial Radial Insert Ball Bearings Housing Units Our Expertise is Your Benefit Schaeffler Group Industrial A p p l i c a t i o n s Quality for every eventuality: Radial insert ball bearings in industry Radial

More information

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK

Schedule of Accreditation issued by United Kingdom Accreditation Service 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK 2 Pine Trees, Chertsey Lane, Staines-upon-Thames, TW18 3HR, UK ISO/IEC 17021:2011 to provide quality management systems Palace House 3 Cathedral Street London SE1 9DE United Kingdom Contact: Mr D P Koek

More information

NSK Product Lineup for Machine Tools

NSK Product Lineup for Machine Tools NSK Product Lineup for Machine Tools We have two general catalogs on Super Precision and Precision Machine Components available, which contain detailed information related to our bearings and linear products.

More information

ABB Power Electronics. Product Life Cycle Management Committed to operational reliability

ABB Power Electronics. Product Life Cycle Management Committed to operational reliability ABB Product Life Cycle Management Committed to operational reliability Optimized performance Experts supporting experts We are committed to the reliability of your operations. Which is why we make every

More information

Group Companies and Network

Group Companies and Network Annual Report 2009 By business segment as of March 31, 2009 Operations in Japan Corporate Financial Services Domestic Sales Administrative Headquarters Lending, Leasing, Other Financial Services Apr. 1964

More information

What have you got in mind?

What have you got in mind? What have you got in mind? Instituto Superior Técnico EIM10 Frederico Machado Jorge Maria João Almeida José Pedro Marques 10 de Fevereiro de 2010 2010 Towers Watson. All rights reserved. What to expect

More information

Caba3D. An Insight into Rolling Bearing Dynamics

Caba3D. An Insight into Rolling Bearing Dynamics Caba3D An Insight into Rolling Bearing Dynamics The Schaeffler Calculation Chain The perfect tools for systems with rolling bearings Commercial solutions: Finite element method multi-body simulation, etc.

More information

STATE OF GLOBAL E-COMMERCE REPORT (Preview) February 2013

STATE OF GLOBAL E-COMMERCE REPORT (Preview) February 2013 STATE OF GLOBAL E-COMMERCE REPORT (Preview) February 2013 THE E-COMMERCE REPORT WHAT IS THE E-COMMERCE REPORT? It is an annual investigation into the global uptake and impact of e- commerce. The report

More information

Software Tax Characterization Helpdesk Quarterly June 2008

Software Tax Characterization Helpdesk Quarterly June 2008 & McKenzie Software Tax Characterization Helpdesk Quarterly June 2008 Characterizing foreign software revenues is a complex challenge for large and small software firms alike. Variations in the rules around

More information

Environmental Chambers For Solar Panel Testing

Environmental Chambers For Solar Panel Testing Environmental Chambers For Solar Panel Testing ESPEC s Environmental Chambers Designed for Solar Panel Testing Solar panels need to pass environmental tests per IEC and/or UL requirements to prove their

More information

October 2007. Trust in Advertising. a global Nielsen

October 2007. Trust in Advertising. a global Nielsen October 2007 Trust in Advertising a global Nielsen consumer report Word-of-mouth the most powerful selling tool: Nielsen Survey Traditional Media Advertising Still More Credible Worldwide Than Ads on Search

More information

Batch coater For exceptional product quality

Batch coater For exceptional product quality Batch coater For exceptional product quality www.andritz.com/ft Batch coating system with or without vacuum potentially opens the door to the production of entirely new categories of products in the future.

More information

BROWN BROTHERS HARRIMAN (LUXEMBOURG) S.C.A. Wells Fargo (Lux) Worldwide Fund

BROWN BROTHERS HARRIMAN (LUXEMBOURG) S.C.A. Wells Fargo (Lux) Worldwide Fund Argen na CITIBANK, N.A. BUENOS AIRES BRANCH Australia Austria HSBC BANK AUSTRALIA LIMITED FOR THE HONGKONG AND SHANGHAI DEUTSCHE BANK AG, VIENNA BRANCH Belgium DEUTSCHE BANK AG, AMSTERDAM BRANCH Brazil

More information

Cerobear Spindle Bearings for Machine Tool Applications

Cerobear Spindle Bearings for Machine Tool Applications Cerobear Spindle Bearings for Machine Tool Applications Cerobear Spindle Bearings About CEROBEAR Committed to the abbreviation CEramic in ROlling BEARings, CEROBEAR GmbH is the renowned world leader in

More information

FAG Deep Groove Ball Bearings 6203-2RSR-M-P6-L38T-C3-S1

FAG Deep Groove Ball Bearings 6203-2RSR-M-P6-L38T-C3-S1 FAG Deep Groove Ball Bearings 6203-2RSR-M-P6-L38T-C3-S1 60 Extra Light 62 Light 63 Medium 64 Heavy Sealing & Shielding No Suffix Open Bearing C Generation C Design RSR Standard Rubber Seal (Contact) 2RSR

More information

SKF precision bearings

SKF precision bearings SKF precision bearings Contents Made by SKF stands for excellence. It symbolises our consistent endeavour to achieve total quality in everything we do. For those who use our products, Made by SKF implies

More information

To Protect Your Warranty, Use Only ENERPAC Hydraulic Oil.

To Protect Your Warranty, Use Only ENERPAC Hydraulic Oil. Repair Parts Sheet PA-133, 7001/PA-135/PA136 AIR HYDRAULIC PUMP L-1252 Rev. J 03/99 PA135 - For Date Codes Beginning with the Letter "A" PA133, 7001 & PA136 - For Date Codes Beginning with the Letter "C"

More information

Certificate of Registration

Certificate of Registration Certificate of Registration QUALITY MANAGEMENT SYSTEM - ISO 9001:2008 This is to certify that: 2200 West Salzburg Road P.O. Box 994 Holds Certificate No: FM 10734 and operates a Quality Management System

More information

MICRO HYDRO POWER GENERATING EQUIPMENT

MICRO HYDRO POWER GENERATING EQUIPMENT MICRO HYDRO POWER GENERATING EQUIPMENT TOSHIBA TOSHIBA ENGINEERING In general, specifications of hydroelectric power system vary depending upon the installation location. The hydro turbine and generator

More information

O-Ring Kit No. 9-9488 for XT-Series Torch. Installation Instructions. General Information. Parts Supplied. Procedure. Torch O-Ring Change.

O-Ring Kit No. 9-9488 for XT-Series Torch. Installation Instructions. General Information. Parts Supplied. Procedure. Torch O-Ring Change. O-Ring Kit No. 9-9488 for XT-Series Torch Original Publication Date: 2003 Manual no.: 0-4951 Revision Date: 5/05/2014 Revision: AJ General Information This kit is for use only with Victor Thermal Dynamics

More information

STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies

STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum

More information

Radial piston pumps type R and RG

Radial piston pumps type R and RG Radial piston pumps type R and RG Operating pressure p max = 700 bar Delivery flow Q max = 91.2 lpm (at 1450 rpm) Geometric displacement V g max = 64.2 cm 3 /rev. 1. General Motor pumps and hydraulic power

More information

PV Mounting System For Crystalline Solar Module THE POWER OF ASTRONERGY

PV Mounting System For Crystalline Solar Module THE POWER OF ASTRONERGY PV Mounting System For Crystalline Solar Module THE POWER OF ASTRONERGY Tile on-roof PV Mounting System Installation on tiles roof. Various quick roof hooks with different strength and structure are available.

More information

MX860850A. HSDPA Measurement Software. (For MS8608A Digital Mobile Radio Transmitter Tester) For Evaluation of HSDPA Transmission Systems

MX860850A. HSDPA Measurement Software. (For MS8608A Digital Mobile Radio Transmitter Tester) For Evaluation of HSDPA Transmission Systems MX860850A HSDPA Measurement Software (For MS8608A Digital Mobile Radio Transmitter Tester) For Evaluation of HSDPA Transmission Systems Supporting HSDPA (High Speed DownLink Packet Access) From R&D & Manufacturing

More information

Bearing Failure: Causes and Cures

Bearing Failure: Causes and Cures Bearing Failure: Causes and Cures bearing.ppt Page 1 Excessive loads usually cause premature fatigue. Tight fits, brinelling and improper preloading can also bring about early fatigue failure. The solution

More information

Performance 2015: Global Stock Markets

Performance 2015: Global Stock Markets Performance 21: Global Stock Markets November 12, 21 Dr. Edward Yardeni 16-972-7683 eyardeni@ Mali Quintana 48-664-1333 aquintana@ Please visit our sites at www. blog. thinking outside the box Table Of

More information

Contact Centre Integration Assessment

Contact Centre Integration Assessment Contact Centre Integration Assessment How well are your business objectives aligned with the right contact centre technologies? Knowing how the technology in your contact centre supports service delivery

More information

AMBIT ISLAMIC BANKING. Ambit Risk Management & Compliance

AMBIT ISLAMIC BANKING. Ambit Risk Management & Compliance AMBIT ISLAMIC BANKING Ambit Risk Management & Compliance AMBIT RISK MANAGEMENT & COMPLIANCE FOR ISLAMIC BANKING With Islamic banking growing at rapid rates, a new and highly competitive playing field has

More information

Brochure More information from http://www.researchandmarkets.com/reports/1339929/

Brochure More information from http://www.researchandmarkets.com/reports/1339929/ Brochure More information from http://www.researchandmarkets.com/reports/1339929/ The 2011 World Forecasts of Machine Tools That Remove Material by Laser or Light, Photon, Ultrasonic, Electro-Discharge,

More information

ANNEX TABLES Table 1. Revenue by ICT Type Revenue * Share to Total Revenues Growth Rate ICT Type 2004 2005 2004 2005 (in percent)

ANNEX TABLES Table 1. Revenue by ICT Type Revenue * Share to Total Revenues Growth Rate ICT Type 2004 2005 2004 2005 (in percent) ANNEX TABLES Table 1. Revenue by Revenue * Share to Revenues 2004 2005 2004 2005 Contact Centers 32,904.1 54,295.1 44.4 49.4 65.0 Medical Transcription 236.7 466.2 0.3 0.4 97.0 Animation 694.2 939.1 0.9

More information

Certificate. Hilti Aktiengesellschaft. 9494 Schaan Liechtenstein. According to appendix

Certificate. Hilti Aktiengesellschaft. 9494 Schaan Liechtenstein. According to appendix Certificate SQS herewith certifies that the company named below has a management system which meets the requirements of the standards specified below. Certified area According to appendix Field of activity

More information