HT 230 A 24. Motorspindel Motor Spindle Broche à moteur. Technische Spezifikation. Technical Specification Spécification technique OUT.
|
|
- Jeffery Sharp
- 8 years ago
- Views:
Transcription
1 c r = 400 N/µm c a = 320 N/µm statisch static statique Vorspannung mit Federn Preload with Springs Précontrainte avec ressorts IN OUT mit Wasserkühlung with Water cooling à l eau mit intensiver Lagerkühlung with intensive Ball Bearing cooling intensif des roulements KW ØD D = 70 mm KW = 25 KW = Kontaktwinkel KW = Contact Angle KW = angle de contact IN OUT mit intensiver Statorkühlung with intensive Stator cooling intensif du stator Oel Oil Huile Oel-Luft Hochdruck- Minimalschmiersystem High Pressure Oil-Air min. Lubrication System Système de graissage airhuile à haute pression Fett Grease Graisse Option P Dauergeschmierte Fettkugellager Permanent Greased Lubrication Lubrification par graissage permanent Option K DIN HSK-A63 Werkzeugsysteme Tooling Systems Système d outillage...\data_sheets\motor_spindles\hf_230\230a24\ts-ht230a24.doc 1 / Juni 2014 / fm
2 (Option F) Flanschausführung(en) Flange Version(s) Version(s) avec flasque Spindelzeichnung und/oder Flansch Option F Spindle Drawing and/or Flange Option F Dessin de la broche et/ou flasque Option F Spindelzeichnung Spindle Drawing Dessin de la broche Verkaufszeichnung Sales Drawing Dessin de vente Spindelgewicht: Spindle Weight: Poids de la broche: kg Option H hydraulische Löseeinheit Unclamp Unit hydraulic Unité de desserage hydraulique Option Leistung und Drehmoment Power and Torque Puissance et couple Leistungs-/Drehmomentdiagramme oder Motorenübersicht Power-/Torque-Diagrams or Summery of Motors Diagrammes de puissance et couple ou caractéristiques des moteurs Option Asynchron- oder Synchronmotoren, Thermistor: KTY, PTC oder je nach Wunsch Asynchronous- or Synchronous Motors, Thermistor: KTY, PTC or your wish Moteur asynchrone ou synchrone, thermistance KTY, PTC ou autre sur demande Thermistoren Thermistors Thermistances...\Data_Sheets\Motor_Spindles\HF_230\230A24\TS-HT230A24.doc 2 / Juni 2014 / fm
3 1 Werkzeugwechselsensor 1 ATC Sensor 1 capteur de position du changeur d outils Position mit Sensor with Sensor avec capteur mit Kolbenpositionsüberwachung Piston Position Control Contrôle de position du piston Temperatursensor am Kugellager vorne Temperature Sensor on the Front Bearing Capteur de température du roulement avant Temperatursensoren Temperature Sensors de températ. Vibrationssensor Vibration Sensor Capteur de vibration Bürste Brush Brosse Mit Antistatikbürsten With Anti Static Brushes Avec des brosses antistatiques Temperatursensor am Kugellager hinten Temperature Sensor on the Rear Bearing Capteur de température du roulement arrière Temperatursensoren Temperature Sensors de températ. Datenlogger mit Vibrationssensor und digitalen Temperatursensoren Data Logger with Vibration Sensor and digital Temperatur Sensor Enregistreur de données avec capteur de vibrations et de température...\data_sheets\motor_spindles\hf_230\230a24\ts-ht230a24.doc 3 / Juni 2014 / fm
4 s Längenwachstumsmessung: Messung der axialen Versetzung der Welle durch mechanische Verlagerung und Wärmeverluste zur Kompensation auf einer CNC- Steuerung; ±10 V; <5 µm genau Shaft Displacement Measurement: Measuring of the axial displacement of the spindle shaft due to mechanical movement to compensate over the CNC signal; ±10 V; <5 µm Compensation de la dilatation : Mesure de la dilatation mécanique et thermique de l arbre, compensation dans la CN dans la relation de <5 µm par un signal ±10 V Option V Eingebauter Mini-Encoder mit Sinussignalen 1.0 V PP, für Vektorbetrieb und orientiertem Spindelstopp. Andere Signalformen auf Anfrage. Build-in Mini-Encoder with sinusoidal wave signal 1.0 V PP, for vector drive and oriented spindle stop. Other signals in request. Système vectoriel pour positionnement angulaire de l arbre par encodeur avec signal sinusoïdal 1.0 V PP. Autre forme de signal sur demande. Konusreinigung CL Cleaning CL Nettoyage de cône CL AS Sperrluft AS Air Seal AS Surpression d air AS CL Spritzdüsen TCW1 Nozzles TCW1 Buses d arrosage TCW1...\Data_Sheets\Motor_Spindles\HF_230\230A24\TS-HT230A24.doc 4 / Juni 2014 / fm
5 Drehdurchführung: Kühlung durch das Spindelzentrum ( bis 80bar) Rotary Union: Cooling through the Spindle Center ( up to 80bar) Joint tournant: Arrosage par le centre de la broche (standard jusqu à 80bar) Drehdurchführungen für Kühlschmiermittel, Öl, Luft, Minimal-Mengenschmierung Rotary Unions for Coolant Lubrication, Oil, Air, Minimal Quantity Lubrication Joint tournant pour liquide de refroidissement, huile, air, air-huile à graissage mini. Minimalmengen- Schmierung (1-kanalig) Minimal Quantity Lubrication (1 Channel) Air-huile à graissage minimum (1 canal) Minimalmengen- Schmierung (2-kanalig) Minimal Quantity Lubrication (2 Channels) Air-huile à graissage minimum (2 canaux)...\data_sheets\motor_spindles\hf_230\230a24\ts-ht230a24.doc 5 / Juni 2014 / fm
BIG POWER! Large FEC-50 FTARH 50. Grande puissance - Grosser Leistung SLIM LINE POWER. Spindle Extention. Spindle Speeder
Large Grande puissance - Grosser FEC-50 Manual and NC controlled Manual or automatic tool change 30 to 100 2000 kg 100 FTARH 50 BIG POWER! Manual and NC controlled 32 515 kg 1'500 3'000 30 to 50 SLIM LINE
More informationECO 80 PRODUCT DESCRIPTION FEATURES. Power output S1 100% Adjustable air nozzle. Liquid cooling. Minimalmengenschmierung MMS retrofit
A PRODUCT DESCRIPTION Power output S6 40% Power output S1 100% Rotation speed Diameter Spindlehousing Spindle interface 3.0 kw 2.5 kw to 40.000 rpm 80 mm Stainless steel HSK - E25 FEATURES Adjustable air
More informationCAD 302.02.10.1 SK 30 1 10 (ER 16) 100 32 302.02.16.1 SK 30 2 16 (ER 25) 100 42 302.02.20.1 SK 30 2 20 (ER 32) 100 50
Spannfutter für Spannzangen DIN 6499 (ISO 15488) System ER Collet chucks for collets DIN 6499 (ISO 15488) ER-system Mandrins à pinces pour pinces DIN 6499 (ISO 15488) système ER Verwendung: Zur Aufnahme
More informationSiemens AG 2009. Spindle solutions. Spindle motors and motor spindles for every requirement. Brochure October 2009. Motors. Answers for industry.
Spindle solutions Spindle motors and motor spindles for every requirement Brochure October 2009 Motors Answers for industry. The right spindle solution for any task The function, performance and accuracy
More informationDutchi Motors. Series DMA2. Power is our commodity, the world is our market! ATEX 100A Ex II3D, ATEX 100A Ex II3G,
Dutchi Motors Series DMA2 EFF 1 EFF 2 Power is our commodity, the world is our market! ATEX 100A Ex II3D, ATEX 100A Ex II3G, Zone 2 EEx na II T3 IP55 Zone 22 T125 C IP55 CE EFF 1 EFF 2 ATEX 100A Ex II3G,
More informationPCI SCEMM PCI SCEMM Introduction
PCI SCEMM PCI SCEMM Introduction Copyright Process Conception Ingeniérie 0 Agenda 1 2 3 4 5 PCI Introduction clé en main/turnkey Solution UGV/HMC Machines spéciales/s.p.m. Services Copyright Process Conception
More informationMachining Spindles for belt drive and direct driven 25060310 Catalog 25060310 Index Spindle specification 4-6 TSA - External taper style 7 TSI - Internal taper style 8 TSP - Cylindric pilot with face clamping
More informationT-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5. www.thomsonlinear.com
T-Series Precision Linear Actuators Installation and Service Manual DW110353GB-1018 - EDITION 5 www.thomsonlinear.com Version History Edition Number Edition Date Reason for Revision 1 2004 First edition
More informationSPINDLE PROGRAMME MILLING MILLING SPINDLES BEST SELECTION. WEISS Spindeltechnologie GmbH A Siemens Company
SPINDLE PROGRAMME MILLING MILLING SPINDLES BEST SELECTION WEISS Spindeltechnologie GmbH A Siemens Company GSS GLOBAL SPINDLE SOLUTIONS MILLING SPINDLES MILLING FOR EVERY APPLICATION MORE THAN 1,000 DRIVE
More information[ means: Save time, money and space! MAXXMILL 500. Vertical milling center for 5-side machining
[ E[M]CONOMY] means: Save time, money and space! MAXXMILL 500 Vertical milling center for 5-side machining MAXXMILL 500 MAXXMILL 500 is the ideal vertical milling center for the for the 5-axis operation
More informationSpécifications techniques
www.farpi.com FARPI-FRANCE 06/2015 V1.20 Spécifications techniques - Petit Tonnage de J35AD à J180AD All Electric Servo Drive Injecon Molding Machine FARPI-FRANCE Z.I. le Chanay -BP 3-69720 SAINT BONNET
More informationCNC Vertical Machining Center Alpha-Center HD Heavy cast iron design, precise guideways, high-performance gear designed for heavy machining
CNC Vertical Machining Center Alpha-Center HD Heavy cast iron design, precise guideways, high-performance gear designed for heavy machining Optional spindle package: 31 kw maximum power 870 Nm max. torque
More informationANDERSON Square bale wrapper 580SB and 780SB
Part Manual ANDERSON Square bale wrapper 580SB and 780SB 6 Février 006 Visit our website at www.anderson-machineries.com Part manual index The main frame The tow bar 3 The tandems and the axles 4 The dumping
More informationQuick Reference Catalog
Gearboxes Turrets Y-Axis Rotary Tools Tool Discs B-Axis Quick Reference Catalog WWW.BARUFFALDI.IT TB Servo Turret SERVO MOTOR TURRETS TB-type turrets rotate thanks to a BRUSHLESS SERVO MOTOR controlled
More informationIP40 or IP64 (EN 60529) Protection class housing. IP50 (IP65 optional) (EN 60529) Minimum length of mountig
Through hollow shaft Ø 5 bis 4 mm Outside diameter only 76 mm Easy installation by means of clamping ring front or rear Operating temperature up to 00 C Applications: motors, printing machines, lifts NUMBER
More informationMOTEUR / ENGINE COMMISSION INTERNATIONALE DE KARTING FIA FICHE TECHNIQUE D AGRÉMENT APPROVAL TECHNICAL FORM 01/FM/09 FORMULE MONDIALE / WORLD FORMULA
FICHE TECHNIQUE D AGRÉMENT APPROVAL TECHNICAL FORM Agrément N COMMISSION INTERNATIONALE DE KARTING FIA MOTEUR / ENGINE FORMULE MONDIALE / WORLD FORMULA Constructeur Manufacturer BRIGGS & STRATTON Marque
More informationVentilation Ventilation
Aérateur de toit Roof ventilator Blanc / White Gris / Grey - 121.40.420 - Matière / Material ABS Autogire - Aérateur mécanique monté sur 2 roulements à billes - Livré avec sa grille intérieure en polycarbonate
More informationTechnical Information. Hydrostatic Spindles. Hydrostatik by Hyprostatik. Innovative Spindle Concepts
Technical Information Hydrostatic Spindles Hydrostatik by Hyprostatik Innovative Spindle Concepts 2 Table of contents 1. Advantages and disadvantages of hydrostatic spindles 4 1.1 Advantages of hydrostatic
More informationMOTEUR / ENGINE TM K9-ES
ENGINE SPECIFICATIONS MOTEUR / ENGINE TM K9-ES Constructeur Manufacturer TM RACING ITALY Marque Make TM RACING Modèle Model K9-ES Type d admission Inlet type REED VALVE Nombre de pages Number of pages
More informationDriven Toolholders for SAUTER Turrets
Driven Toolholders for SAUTER Turrets Manufacturer of Precision Tools since 1974 INNOVATION PRECISION INDIVIDUALITY QUALITY SERVICE Table of Contents Type Page Driven Toolholders DIN 5482 - Disc-type Turrets
More informationSCP 012-130 ISO. Other advantages: SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics.
SCP 012-130 ISO is a series of piston pumps with a fixed displacement for mobile and stationary hydraulics. SCP 012-130 ISO covers the entire displacement range 12-130 cmᶟ rev. at a maximum pressure of
More informationMechanical Cylinders
Mechanical Cylinders 1 Wormgear 2 Spherical plain bearings 3 Motor flange, IEC-norm 4 Lubricator 5 Air vent 6 Spindle nut 7 Trapezoidal spindle 8 Cylinder tube 9 Piston tube 10 Sealing 11 Wiper 12 Rotation
More informationNomenclature Trémie / Hopper - Parts list
Nomenclature Trémie / Hopper - Parts list 1 18272 Pilon / Pusher 2 18153 Bague d articulation couvercle jeu x5 / Lid hinge ring set x5 3 4259 Came / Cam 4 Axe fouloir / voir s3 / Press shaft / see s5 5
More informationExtremely compact in size to allow direct flange-mounting on vehicle engine or gearbox PTOs.
TXV - Presentation pumps with Load Sensing control variable displacement piston pumps ADVANTAGES pumps are variable displacement with pressure-flow control called Load Sensing. They self-regulate to give
More informationPBZ Heavy. PBZ Heavy. CNC Gantry-Type Machining Center. Power - Performance - Precision. www.knuth-usa.com
CNC Gantry-Type Machining Center Power - Performance - Precision Travel X-axis up to 244 in Y-axis up to 126 in Z-axis up to 39 in Strong Machine bed, dual columns and fixed bridge ensure a rigid frame
More informationCNC Portal Milling Machine FZ 32. High Performance Milling Technology
CNC Portal Milling Machine FZ 32 High Performance Milling Technology FZ 32 HSC Portal Milling Machine with Overhead Gantry with upper moving portal high axial accelerations and perfect surface finishes
More information3-PHASE STEPPING MOTOR. VRDM 39x. Document: 100000116 Edition: d013, 2005.02
-PHASE STEPPING MOTOR VRDM 9x Edition: d, 5. Features common to all motor types Test voltage to DIN EN 64 part Insulation class F Run-out and perpendicularity to DIN 4955 N Paint: black RAL 95 Security
More informationDRS/A40-115-1.1M GRINDER. Q = Portata / Flow rate / Débit Modello l/min 75 120 180 225 240 270 Model m Modèle
DRS/A40-115-1.1M S.C. 07/13 DRS/A40-115-1.1M CURVE DI PRESTAZIONE PERFORMANCE CURVES COURBES DE PERFORMANCE TABELLA PRESTAZIONI PERFORMANCE TABLE TABLEAU DE PERFORMANCES Q = Portata / Flow rate / Débit
More informationEmmaco Uk P R E S S R E L E A S E AEROSPACE TOOLING MACHINED FASTER DUE TO 5-AXIS SPINDLE RETROFIT
Emmaco Uk P R E S S R E L E A S E AEROSPACE TOOLING MACHINED FASTER DUE TO 5-AXIS SPINDLE RETROFIT To increase the efficiency of aircraft tooling manufacture at its Dukinfield factory, near Manchester,
More informationLeading-edge technology for machine tools
Leading-edge technology for machine tools We combine five specialists in one Improving productivity and successfully distinguishing themselves from the competition are key objectives for machine tool
More informationCondensate water pump with neutralisation system
Pumps for fuel oil and gas boiler Condensate water pump with neutralisation system SK9E/FP8E débit obtenu (l/h) caractéristriques selon la fréquence réglée performances avec une hauteur d aspiration de
More information1) In the selection table find the motor speed suitable for your application.
Selection In the selection of Koolen vibration motors the physical properties of the products concerned play an important role. The correct value for the torque of Koolen vibration motors can often only
More informationRadial piston pumps type R and RG
Radial piston pumps type R and RG Operating pressure p max = 700 bar Delivery flow Q max = 91.2 lpm (at 1450 rpm) Geometric displacement V g max = 64.2 cm 3 /rev. 1. General Motor pumps and hydraulic power
More informationmotori asincroni trifase autofrenanti hand release may be added on request moteurs-frein asynchrones triphasés
AUTOFRENANTE motori autofrenanti a richiesta con sbloccaggio manuale asynchronous three hand release may be added on request moteurs-frein asynchrones triphasés sur demande avec déblocage manuel dreiphasige
More informationMachine de Soufflage defibre
Machine de Soufflage CABLE-JET Tube: 25 à 63 mm Câble Fibre Optique: 6 à 32 mm Description générale: La machine de soufflage parfois connu sous le nom de «câble jet», comprend une chambre d air pressurisé
More informationERSATZTEILE SPARE PARTS PIECES DE RECHANGE. Änderungen vorbehalten! Subject to change! Modifications réservées!
ERSATZTEILE SPARE PARTS PIECES DE RECHANGE Condair FF2 Änderungen vorbehalten! Subject to change! Modifications réservées! Pos. Artikel Typ Art.-/SAP-Nr. 2545761 DE/EN/FR 1006 Pumpeneinheit / Pump unit
More informationLight, robust, versatile
Light, robust, versatile The aluminium tube union Aluminium tube unions with the SERTO principle Union nut AW 6082 blue anodised lubricated Union body AW 6082 colourless anodised unlubricated Compression
More informationDocument Number TD- 002 Reviewed By Technical Director Drafted By. National Technical Commissioner V1-12 01 15 Immediate
Technical Document No. TD- 002 Technical Regulations for KF2 Document Number TD- 002 Reviewed By Technical Director Drafted By Version Implementation Date National Technical Commissioner V1-12 01 15 Immediate
More informationPersonnalisez votre intérieur avec les revêtements imprimés ALYOS design
Plafond tendu à froid ALYOS technology ALYOS technology vous propose un ensemble de solutions techniques pour vos intérieurs. Spécialiste dans le domaine du plafond tendu, nous avons conçu et développé
More informationMeasuring thermal drift of machine tools
Measuring thermal drift of machine tools dr.ir. G.H.J. Florussen 19 th November 2015, Precisiebeurs, Veldhoven IBS Precision Engineering bv, Esp 201, 5633 AD Eindhoven Tel : + 31 (0)40 290 1270, Fax +
More informationSTATIC STIFFNESS ANALYSIS OF HIGH FREQUENCY MILLING SPINDLE
STATIC STIFFNESS ANALYSIS OF HIGH FREQUENCY MILLING SPINDLE Anandkumar Telang Assistant.Professor, Mechanical Engg Department, BKIT, Bhalki, Karnataka, India Abstract Compared with conventional spindles,
More informationFlygt N-Pumps 3085, 3102 & 3127. For reliable and efficient wastewater handling
Flygt N-Pumps 3085, 3102 & 3127 For reliable and efficient wastewater handling The Concept Flygt N-Pump series Reduced pumping efficiency, high energy and maintenance costs shouldn t be a fact of life
More informationLinear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors
20000 Linear modules Lifting units Rotary modules Grip modules Inductive proximity switches Plug connectors 23000 22000 21000 20000 09000 08000 07000 06000 05000 04000 03000 02000 01000 823 Notes 824 Technical
More informationHow To Simulate A Hydrostatic Displacement Unit
O&P 10 2005 Simulation of hydrostatic displacement units 1 Using modern CAE tools to simulate hydrostatic displacement units Dipl.-Ing. Michael Deeken Institute of Fluid Power Drives and Controls (IFAS)
More informationX30 125cc RL-C TaG FEATURES - CARACTERISTIQUES. Cylinder volume Volume du cylindre. 123.67 cm³. Bore Alésage. 54 mm
X30 125cc RL-C TaG FEATURES - CARACTERISTIQUES Cylinder volume Volume du cylindre 123.67 cm³ Bore Alésage 54 mm Max. theoretical bore Alésage théorique max. 54.28 mm Stroke Course 54 mm Cooling system
More informationTool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014. 0414/Rö
Tool Holder Catalog INDEX ABC VDI 25 LL3602.30051-10.04.2014 0414/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due to errors
More informationTool Turrets and Tool Discs
Our other products Automatic Tool Changer Chucking Cylinders Tool Discs Indexing Tables Tool Turrets and Tool Discs Pragati Automation Pvt. Ltd. 1, IV Phase, 11th Cross, Peenya Industrial Area Bangalore
More informationTurbine Flow Sensor Series VTR
Turbine Flow Sensor Series VTR SIKA Turbine Flow Sensor Series VTR Extra robust, impressively precise SIKA s VTR turbine flow sensor allows you to determine precisely, dependably and easily the flow rates
More informationTHE USE OF INERTIA SIMULATION IN BRAKE DYNAMOMETER TESTING UTILISATION DE LA SIMULATION D'INERTIE DANS LES DYNAMOMÈTRES DE FREINS
THE USE OF INERTIA SIMULATION IN BRAKE DYNAMOMETER TESTING UTILISATION DE LA SIMULATION D'INERTIE DANS LES DYNAMOMÈTRES DE FREINS James K. THOMPSON, Ph D, PE, Aaron MARKS, and Denis RHODE Link Engineering
More informationPART II DYNOMAX INFORMATION
PART I SPINDLE FACTS 1. Introduction... 2 2. Precision Spindle Design... 3 2.1 List of Major Components... 3 2.2 Basic Spindle Styles... 3 Belt and Gear Driven Spindle Design...3 Integral Motor-Spindle
More informationSpecifications for Volkswagen Industrial Engine
Volkswagen 1 industrial engine Specifications for Volkswagen Industrial Engine AFD 1.9 ltr. TDI diesel engine EURO 2 Volkswagen AG, Wolfsburg Volkswagen AG reserves the right to introduce amendments or
More informationDMU 75 / 95 monoblock
www.dmgmori.com Five-axis universal milling machines DMU 75 / 95 monoblock High tech as standard Five-axis simultaneous machining at the best price. DMU 75 / 95 monoblock Top features for five-axis simultaneous
More informationStandard cleaning nozzles
Kanalreinigungs- Düsen Standard cleaning nozzles Buses de nettoyage Hergestellt aus verschleissfestem, gehärtetem Stahl, ausgerüstet mit Vorstrahl-Einsatz oder Blindstopfen (austauschbar). gegen hinten,
More informationPressure relief valves Size 6
Pressure relief valves Size 6 direct controlled Interface to DIN 24 340 and ISO 6264 PN [p max. ] = bar 750400.06.0.06 Description (standard units) Design The pressure relief valves of Type D B C 6 are
More informationHIGH SPEED SPINDLE MOTORS
DATA SHEET HM / HT and ES Ranges HIGH SPEED SPINDLE MOTORS Manual and Automatic Tool Change Compact, high speed, asynchronous motors with power ratings from 0.65 to 18 designed to provide long term reliability
More informationJet Propulsion System
This repair manual is valid for the following jet pump variants: 0333_ 0 V3 007 3. 033_ 0 V 007 3. 0380_ 3 V 007 3. 0335_ 3 V 007 3. 033_ 66 V 008. 0338_ 66 V 008. Table of Contents Before you begin working
More informationPosition Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series
Position Transducers with Restoring Spring 10, 25, 50, 75, 100 mm TR, TRS Series Special features long life 100 x 10 6 movements outstanding linearity up to ±0.075% choice of plug or cable connection DIN
More informationQ&A Session for Advanced Ball Screws 102: Troubleshooting for Design Engineers
Q&A Session for Advanced Ball Screws 102: Troubleshooting for Design Engineers Topic: Noise Q: Is there a way to predict/calculate noise on a ball screw? A: No, there is no way to calculate the noise of
More informationMINEX -S. Magnetic coupling. You will find continuously updated data in our online catalogue at www.ktr.com
MINEX - 171 Table of contents NEW MINEX - 171 Coupling description 173 Technical description 174 s A 22/4 to B 60/8 with containment shroud made of stainless steel 175 s A 75/10 to F 250/38 with containment
More informationTable of contents CAT DISC 25. Mower
Mower CAT DISC 25 ( Type PTM 370 : +.. 01001 ) Excerpt from operating manual Nr. 0370B00C.pdf Table of contents Swath Discs... 13 Swath Boards... 13 Safety points... 14 General maintenance hints... 14
More informationSense it! Connect it! Bus it! Solve it! EncoderS
Sense it! Connect it! Bus it! Solve it! EncoderS Incremental encoders Incremental encoders use electrical pulses to measure rotation speed or position. The dual-channel incremental encoders of the Ri series,
More informationRotary Joints Solutions for safe transfer of fluids
Rotary Joints Solutions for safe transfer of fluids Rotary Joints for Machine Tools Rotary Joints for Machine Tools Rotary joints are required in practically all industries to transfer fluids from stationary
More informationkymanual or Automatic - it s your Choice
. kymanual or Automatic - it s your Choice ky LKB Automatic or Manual Butterfly Valve Application LKB is a sanitary automatically or manually operated butterfly valve for use in stainless steel pipe systems.
More informationSystem Expertise for Machine Tools
System Expertise for Machine Tools LTi gives you a competitive edge Increased productivity and the ability to gain a vital competitive edge are among the key benefits of LTi drive and control solutions
More informationTool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014. 0214/Rö
Tool Holder Catalog TRAUB TNX 65/42 VDI 30 HSK 40 142856-21.02.2014 0214/Rö Disclaimer The illustrations in this documents may deviate from the delivered product. We reserve the right to make changes due
More informationSur 1 Bit bit n 4 bit n 3 bit n 2 bit n 1 bit n 4 bit n 3 bit n 2 bit n 1 bit n 4 bit n 3 bit n 2 bit n 1
Si on a 1 QUARTET Si on a 2 QUARTETS QUARTET Faible Poids QUARTET Fort Poids QUARTET Faible Poids Sur 1 Bit bit n 4 bit n 3 bit n 2 bit n 1 bit n 4 bit n 3 bit n 2 bit n 1 bit n 4 bit n 3 bit n 2 bit n
More informationAPPENDIX / ANHANG / ANNEXE ALPHA ALTERNATOR DIMENSIONS, INSTALLATION DRAWINGS AND CHARACTERISTICS
APPENDIX / ANHANG / ANNEXE ALPHA ALTERNATOR DIMENSIONS, INSTALLATION DRAWINGS AND CHARACTERISTICS MASTERVOLT Snijdersbergweg 93, 1105 AN Amsterdam The Netherlands Tel.: +31-20-3422100 Fax.: +31-20-6971006
More informationPos. Qty. Article Descripiton Price /
Offer 1 1 Vertical CNC-machining centre Mill 800 40 tools Partly refurbished pre-owned machine Delivered 2003 Weight approx. 7000 kg Machine-No. 220-52 Column moving machining centre with fixed table NC
More informationUltra Live Center RN. Clamping tools for clamping on machine tools. NEIDLEIN revolving ultra live centers type RN ensure: Type RN with morse taper
Ultra Live Center RN Type RN with morse taper NEIDLEIN ultra live centers are designed for employment in turning, grinding and other production machines. Owing to the application of bearing and the stable
More informationSJT / SJM / SJP Large Vertical Pumps
SJT / SJM / SJP Large Vertical Pumps The Heart of Your Process SJT, SJM, SJP Large Vertical Pumps Product Overview SJT Turbine Ns 1800 < 5000 nq 35 < 110 SJM Mixed Flow Ns 5800 < 8300 nq 113 < 161 SJP
More informationBoWex SD, SD1 and SD2 Operating-/Assembly Instructions
D-807 Rheine 0111 E 1 curved-tooth gear couplings are flexible shaft connections. They are able to compensate for shaft displacement caused by, as an example, inaccuracies in production, heat expansion,
More informationSIRIUX. SINGLE AND DOUBLE HIGH EFFICIENCY CIRCULATORS Heating Air-conditioning OPERATING LIMITS APPLICATIONS. 28 m 3 /h* Heads up to: Flows up to:
OPERATING LIMITS Flows up to: m /h* Heads up to: m C Max operating pressure: bars Temperature range: - à + C Max ambient temperature: + C ND of orifices: à * m /h: parallel operation SIRIUX SINGLE AND
More informationTorque motors. direct drive technology
Torque motors direct drive technology Why Direct Drive Motors? Fast and effective Direct-drive technology in mechanical engineering is defined as the use of actuators which transfer their power directly
More informationA10VSO Nominal size 18 see RD 92712 A10VSO Nominal size 28...140 see RD 92711
A10VO Nominal size 18 see RD 92712 A10VO Nominal size 28...140 see RD 92711 The variable displacement axial piston pump A10VO in swashplate design was designed for hydrostatic drives in open circuits.
More informationVARIABLE DISPLACEMENT AXIAL PISTON PUMPS. For truck applications
VARIABLE DISPLACEMENT AXIAL PISTON PUMPS For truck applications TVP FEATURES Variable displacement axial piston pumps swash plate design ideally suited for open circuit truck applications. The compact
More informationTable of Contents. Overview 1. Pump Disassembly 2. Control Disassembly / Reassembly 7. Pump Reassembly 13. Adjustment Procedures DR Control 19
Table of Contents Overview 1 Pump Disassembly 2 Control Disassembly / Reassembly 7 Pump Reassembly 13 Adjustment Procedures DR Control 19 Adjustment Procedures DRG Control 20 Adjustment Procedures DFR
More informationCNC MILLING MACHINE TROUBLE SHOOTING. 1. Trouble Shooting. No Trouble Solution. 1.Check the air pressure
CNC MILLING MACHINE TROUBLE SHOOTING 1. Trouble Shooting No Trouble Solution 1 Tool magazine( (Umbrella type) Noise for tool changing Can t change the tool Tool number in chaos Tool magazine keep rotation
More informationL I V E T O O L F O R O K U M A
L I V E T O O L F O R O K U M A The Way to Success [Heimatec headquarters-germany] Heimatec is an international manufacturing company headquartered in Renchen, Germany. Heimatec s 40,000 square foot facility,
More informationDUGARD. Machine Tools Since 1939. Dugard 700L Series Heavy Duty CNC Lathes. www.dugard.com
DUGARD Machine Tools Since 1939 Dugard 700L Series Heavy Duty CNC Lathes www.dugard.com Dugard 700L Heavy Duty CNC Lathe 2000, 3000 or 4000mm bed length Designed for easy and convenient operation The concave
More informationHighly flexible couplings
Construction and operation 8.03.00 Instructions for installation 8.03.00 Types of stress 8.04.00 Diagrams for static deformation of the coupling ring 8.05.00 Coupling size 8.07.00 Examples of combinations
More informationdesign guide nightlife flair
design guide 04 nightlife flair design guide 04 nightlife flair de Tauchen sie ein in das pulsierende en experience the vibrancy of nightlife in fr Plongez vous dans la nuit agitée des nachtleben der großstadt
More informationCNC Machine Control Unit
NC Hardware a NC Hardware CNC Machine Control Unit Servo Drive Control Hydraulic Servo Drive Hydraulic power supply unit Servo valve Servo amplifiers Hydraulic motor Hydraulic Servo Valve Hydraulic Servo
More informationPure Efficiency. C.C.I.A.A.: N REA. 0195268 Cod. Fiscale e P. IVA: 00483230173 Capitale Sociale versato 100.000,00
Pure Efficiency. The need to significantly reduce the production costs to remain competitive on the global market and the requirement to control and lessen the environmental impact of all activities are
More informationRPT SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS 426 2.98 23.01
SIGMA PUMPY HRANICE ROTARY LOBE DISPLACEMENT PUMPS RPT SIGMA PUMPY HRANICE, s.r.o. Tovární 605, 753 01 Hranice, Czech Republic tel.: +4 581 661 111, fax: +4 581 602 587 Email: sigmahra@sigmahra.cz 426
More informationKTS 840-960 - 1080. Technical catalogue. Catalogo tecnico Technischer Katalog
Technical catalogue Catalogo tecnico Technischer Katalog rev.0-15/01/2015 Selector vacuum - pressure Selettore Vuoto - Pressione Wähler von Vakuum/Druck Kit Aluminum Final Air Filter Kit filtro aria alluminio
More informationCDX. EBARA PUMPS EUROPE S.p.A. CENTRIFUGAL PUMPS. Page - CONTENTS 100
CONTENTS Page - CONTENTS 100 - SPECIFICATIONS 200 SELECTION CHARTS 201 PERFORMANCE CHART 70 202 PERFORMANCE CHART 90 203 PERFORMANCE CHART 120 204 PERFORMANCE CHART 200 205 - CONSTRUCTIONS 300 SECTIONAL
More informationSTAR Linear Bushings and Shafts Supplement RE 83 117/2001-08. Linear Motion and Assembly Technologies
STAR Linear Bushings and Shafts Supplement RE 83 117/2001-08 Linear Motion and Assembly Technologies STAR Linear Motion Technology Ball Rail Systems Standard Ball Rail Systems Ball Rail Systems with Aluminum
More informationSITEMA PowerStroke. Technical Information TI-P11. 1 Function. 2 Applications. Mould Closing Devices series FSK. Contents
English translation of German original Technical Information TI-P11 SITEMA PowerStroke Mould Closing Devices series FS drive system for powerful forces on a short stroke hydraulic actuation closing force
More informationO-I DUBI PLANT FANS Quotation Spec Data & Specifications
TECHNICAL DATA O-I DUBI PLANT FANS Quotation Spec Data & Specifications 1 page for the global informations + 12 pages for the fans data Revision 2 end april Global informations: These fans are a replacement
More information- CONSTRUCTIONS 300 SECTIONAL VIEW 300 MECHANICAL SEAL 301 - DIMENSIONS AND WEIGHT 400 PUMP 400 PACKING 401
CONTENTS Page - SPECIFICATIONS 200 SELECTION CHART 201 TYPE KEY AND CURVE SPECIFICATIONS 202 PERFORMANCE CURVE 70 204 PERFORMANCE CURVE 90 205 PERFORMANCE CURVE 120 206 PERFORMANCE CURVE 200 207 - CONSTRUCTIONS
More informationWorkshop Compressors CLASSIC Series
www.kaeser.com Workshop Compressors CLASSIC Series Displacement: 210 to 40 l/min Pressure: 10 bar What do you expect from your CLASSIC workshop compressor? Quality results can be achieved only by using
More informationSpherical engine/generator-unit can boost electrical car dynamics
Spherical engine/generator-unit can boost electrical car dynamics Automobile: Cars run singely on battaries have a range of approx. 150 km. Electrical cars with "range-extender" have the same range as
More informationRoHS. Shock / vibration resistant. Magnetic field proof. Many variants
Sendix 5000 / 500 (Shaft / Hollow shaft) Push-Pull / RS4 ue to their sturdy bearing construction in Safety-ock esign, the Sendix 5000 and 500 offer high resistance against vibration and installation errors.
More informationReaction Torque Sensor
Force 1 1 N m up to 1 000 1 000 N m Type 9329A 9389A These easy to install piezoelectric reaction torque sensors are particularly suitable for measuring rapidly changing torques at non-rotating shafts.
More informationBac + 04 Licence en science commerciale, option marketing et communication. Degree in computer science, engineering or equivalent
L un de ces postes vous intéresse? Postulez sur djezzy@talents-network.com Communication Brand senior manager Bac + 04 Licence en science commerciale, option marketing et communication. 05 years minimum
More informationFixed displacement vane pumps
Fixed displacement vane pumps RE 1335/1.5 Replaces: 11.2 1/22 Types PVV and PVQ Nominal sizes 18 to 193 Series 1X Maximum operating pressure 21 bar Maximum displacement 18 to 193 cm 3 Doppelpumpe_d_ Double
More informationGAZELLE 60cc TaG - FREE
GAZELLE 60cc TaG - FREE FEATURES - CARACTERISTIQUES Cylinder volume Volume du cylindre 59.42 cm³ Bore Alésage 41.80 mm Max. theoretical bore Alésage théorique max. 42 mm Stroke Course 43.30 mm Cooling
More information218 Rosenberger Hochfrequenztechnik GmbH & Co. KG, Germany, Phone +49 (0)8684 18-0, info@rosenberger.de, www.rosenberger.com
coaxial connectors are reliable screw-on connectors with high degree of protectionand excellent intermodulation. Due to their mechanical stability and weather resistance connectors are suitable for outdoor
More informationAPPENDIX / ANHANG / ANNEXE
APPENDIX / ANHANG / ANNEXE ALPHA ALTERNATOR DIMENSIONS, INSTALLATION DRAWINGS AND CHARACTERISTICS MASTERVOLT Snijdersbergweg 93, 1105 AN Amsterdam The Netherlands Tel.: +31-20-3422100 Fax.: +31-20-6971006
More informationMachine tool optimization
Machine tool optimization SKF solutions for super-precision, productivity and sustainability The Power of Knowledge Engineering Run faster, longer, Machine tools: whether you are designing them or using
More information