Allscripts Enterprise EHR CMT User Guide Test Cases

Size: px
Start display at page:

Download "Allscripts Enterprise EHR 11.2. CMT User Guide Test Cases"

Transcription

1 Allscripts Enterprise EHR 11.2 CMT User Guide Test Cases Copyright 2010 Allscripts-Misys

2 Copyright 2010 Allscripts-Misys Healthcare Solutions, Inc. This document is the confidential property of Allscripts-Misys Healthcare Solutions, Inc. It is furnished under an agreement with Allscripts-Misys Healthcare Solutions, Inc. and may only be used in accordance with the terms of that agreement. The use of this document is restricted to customers of Allscripts-Misys Healthcare Solutions, Inc. and their employees. The user of this document agrees to protect the Allscripts-Misys Healthcare Solutions, Inc. proprietary rights as expressed herein. The user further agrees not to permit access to this document by any person for any purpose other than as an aid in the use of the associated system. In no case will this document be examined for the purpose of copying any portion of the system described herein or to design another system to accomplish similar results. This document or portions of it may not be copied without written permission from Allscripts-Misys Healthcare Solutions, Inc. The information in this document is subject to change without notice. The names and associated patient data used in this documentation are fictional and do not represent any real person living or otherwise. Any similarities to actual people are coincidental. CPT copyright 2009 American Medical Association. All rights reserved. Fee schedules, relative value units, conversion factors and/or related components are not assigned by the AMA, are not part of CPT, and the AMA is not recommending their use. The AMA does not directly or indirectly practice medicine or dispense medical services. The AMA assumes no liability for data contained or not contained herein. CPT is a registered trademark of the American Medical Association. International Statistical Classification of Diseases and Related Health Problems (ICD) is copyright 2009 World Health Organization (WHO). Microsoft Excel and Microsoft Word are either registered trademarks or trademarks of Microsoft Corporation in the United States and/or other countries. Allscripts Enterprise EHR CMT User Guide.doc

3 Table of Contents Chapter 1. Test List Validate that activities done on the selected server depending on the date entered in Start Date field are Validate that only new legacy images which are undated and original Medicomp images that were delivered with Allscripts EEHR V11 are from the selected database when Show Legacy Graphics is checked Validate that the Cancellation of Move forms when Go back search button is clicked Validate that the desktop view is copied from source to target server when Go button is clicked Plan: Test : Validate that the desktop view is deleted from target database server when checkbox next to view is selected in right column and Go is clicked Validate that the display of Message Clinical Desktops were not updated since Overwrite was not checked when Check here to overwrite any clinical desktops that have identical names checkbox is not checked Validate that the images are and updated on the source server and not updated on the target server, when Check for updated images Validate that the Inactive details and symptom forms are in selected database with Form, Form UID, Detail Form, Symptom, Original name from XML,WK ID and Comments are when Check detail forms & symptom forms is checked Validate that the Inactive graphics or hotspots are in selected database with Form, Form UID, Graphic and Hotspot and comments are when Check Graphics & hotspots is checked Validate that the list of all note input templates and associated note forms are when Go button is clicked Validate that the missing Note Input Templates that contains forms that are missing detail or symptom forms in the selected database are with Template ID, Template, Form UID, Form, Missing Detail Form, Missing Symptom, WK ID Validate that the new note input templates along with note forms are from the selected database when Show Note Templates and Show Note forms used in Templates are checked Validate that the new note input templates are from the selected database when Show Note Templates is checked Validate the note forms are where are modified on both source server and target server having same originating IDs but different Form IDs, when Check for updated note forms that have a locally edited version on the target Validate that the note forms are where version of note form on the source server is updated and version of note form is not updated on the target server, when Check for updated note forms that have an unchanged version on the target Validate that the note forms are which exist on the source server and also which does not have corresponding form on the target server, when Check for New note forms that have no previous version on the target Validate that the note forms with subforms are copied when Move Forms button is clicked Validate that the only new entries are copied to the target server and existing entries are not modified or updated when Go button is clicked Validate that the only new images are from the selected database when Show Graphics is checked Validate that the only new note forms are from the selected database when Show Note forms is checked Validate that the only new symptom forms are from the selected database when Show Symptom forms is checked Validate that the only note forms are but not symptom forms which are changed after a specified date when date is entered in Show only items modified after field Validate that the subforms that currently exist only in Source server are with a radio button when next button is clicked...46 Allscripts Enterprise EHR CMT User Guide.doc

4 1.24. Validate that the symptom forms are where version of note form on the source server is updated and version of symptom form is not updated on the target server, when Check for updated symptom forms that have an unchanged version on the target Validate that the symptom forms are where are modified on both source server and target server having same originating IDs but different Form IDs, when Check for updated Symptom forms that have a locally edited version on the target Validate that the symptom forms are which exist on the source server and also which does not have corresponding form on the target server, when Check for New symptom forms that have no previous version on the target Validate that the target desktop view is overwritten by the versions from source database when Check here to overwrite any clinical desktops that have identical names checkbox is checked Validate that wild card search is allowed in Search for all items with names like checkbox Plan: Test : Validate the copying of OID and RID Validate the new note input templates along with note forms, symptom forms, images, and legacy images are from selected database when all the checkboxes are checked Validate the presence of Is this what you want to do checkbox Verify that the list includes Note Input Template name, the specialties with which it is associated, and ID number for the template Verify the display of Clinical Desktop views in Source and Target data base servers in left and right columns respectively Verify the presence of Check for missing Note form Components in Content Category drop down Verify the presence of Display New Note Catalog in Content Category drop down Verify the presence of Display Recent Activity in Content Category drop down Verify the presence of Move Clinical Desktops in Content Category drop down Verify the presence of Move Note Forms in Content Category drop down Verify the presence of Move Note Templates in Content Category drop down Verify the presence of Move OID & RID in Content Category drop down Verify the presence of Search for all items with names like option when Move Note Forms is selected in Content Category drop down Verify the presence of Update existing note forms that are referenced within templates Checkbox and by default it is checked...74 Allscripts Enterprise EHR CMT User Guide.doc

5 Chapter 1. Test List 1.1. Validate that activities done on the selected server depending on the date entered in Start Date field are. : Verify the presence of Display Recent Activity in Content Category drop down. Display Recent Activity Content Category should be in Content Category drop down. Allscripts Enterprise EHR CMT User Guide.doc

6 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Display Recent Activity Content Category from the Drop down The Display Recent Activity Content Category is in the Content category field. 3 Enter any valid date in Start date field in the format mm/dd/yyyy. Entered date should be in start date field. 4 Select Source server radio button. Source server radio button is selected. 5 Click on Go button. Activities done in source server after the entered date should be. 6 Select target server radio button. Target server radio button is selected. 7 Click on Go button. Activities done in target server after the entered date should be. Allscripts Enterprise EHR CMT User Guide.doc

7 1.2. Validate that only new legacy images which are undated and original Medicomp images that were delivered with Allscripts EEHR V11 are from the selected database when Show Legacy Graphics is checked. : Validate that that only new legacy images which are undated, original Medicomp images that were delivered with Allscripts EEHR V11 are from the selected database when Show Legacy Graphics is checked. Only new legacy images which are undated and original Medicomp images that were delivered with Allscripts EEHR V11 are from the selected database when Show Legacy Graphics is checked. Allscripts Enterprise EHR CMT User Guide.doc

8 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Display New Note Catalog Content Category from the Drop down The Display New Note Catalog Content Category is in the Content category field. 3 Select Source from Display New Note catalog from which server? Radio list. Source radio button should be selected. 4 Select Show Legacy Graphics? check box. Show Legacy Graphics? check box should be selected. 5 Click on Go button. Only legacy images which are undated, original Medicomp images that were delivered with Allscripts EEHR V11 are from Source server should be. 6 Select target from Display New Note catalog from which server? radio list. Target radio button should be selected. 7 Repeat the steps 3, 4 and 5. Only legacy images which are undated, original Medicomp images that were delivered with Allscripts EEHR V11 are from Target server should be. Allscripts Enterprise EHR CMT User Guide.doc

9 1.3. Validate that the Cancellation of Move forms when Go back search button is clicked : Validate that the Cancellation of Move forms when Go back search button is clicked. Create a note form with sub forms in Note Admin in EEHR Source sever. Transfer of forms is cancelled when Go back search button is clicked. Allscripts Enterprise EHR CMT User Guide.doc

10 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Move Note Forms Content Category from the Drop down The Move Note Forms Content Category is in the Content category field. 3 Verify the presence of "Search for all items with names like:" check box. "Search for all items with names like:" check box should be present. 4 Enter text with wild card % in "Search for all items with names like: " Checkbox Entered criteria should be. 5 Select "Check for New note forms that have no previous version on the target" check box Check for New note forms that have no previous version on the target checkbox should be selected. 6 Click on Go button. Note form created as per condition should be in search results. 7 Select the note form in search results. Selected note form should be selected. 8 Validate that the subforms that currently exist only in Source server are with a radio button when next button is clicked. Subforms that currently exist only in Source server are with a radio button when next button is clicked. 9 Click on Go back search button. Transfer of Note forms /subforms should not happen. Allscripts Enterprise EHR CMT User Guide.doc

11 1.4. Validate that the desktop view is copied from source to target server when Go button is clicked. : Validate that the desktop view is copied from source to target server when Go button is clicked. Desktop view is copied from source to target server when Go button is clicked. s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Move Clinical Desktops Content Category from the drop down The Move Clinical Desktops Content Category is in the Content category field. 3 Verify the display of Clinical Desktop views in Source and Target data base servers in left and right columns respectively. Clinical Desktop views in Source and Target data base servers in left and right columns are respectively. 4 Select the desired Desktop View from Source Server in left column. Desktop view is selected in left column. 5 Validate that the desktop view is copied from source to target server when Go button is clicked. Desktop View selected in 4 should be copied to target server in right column. Allscripts Enterprise EHR CMT User Guide.doc

12 1.5. Plan: Test : Validate that the desktop view is deleted from target database server when checkbox next to view is selected in right column and Go is clicked : Validate that the desktop view is deleted from target database server when checkbox next to view is selected in right column and Go is clicked. Desktop view is deleted from target database server when checkbox next to view is selected in right column and Go is clicked. Allscripts Enterprise EHR CMT User Guide.doc

13 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Move Clinical Desktops Content Category from the drop down. The Move Clinical Desktops Content Category is in the Content category field. 3 Verify the display of Clinical Desktop views in Source and Target data base servers in left and right columns respectively. Clinical Desktop views in Source and Target data base servers in left and right columns are respectively. 4 Select the desired Desktop View from target server in right column. Desktop view is selected in right column. 5 Validate that the desktop view is deleted from target database server when checkbox next to view is selected in right column and Go is clicked. Desktop View selected in 4 should be deleted from target server in right column. Allscripts Enterprise EHR CMT User Guide.doc

14 1.6. Validate that the display of Message Clinical Desktops were not updated since Overwrite was not checked when Check here to overwrite any clinical desktops that have identical names checkbox is not checked. : Validate that the display of Message Clinical Desktops were not updated since Overwrite was not checked when Check here to overwrite any clinical desktops that have identical names checkbox is not checked. 1. Login to EEHR (Source Database server) as twadmin. 2. Click on WorkDef Admin VTB and Workspace Definitions HTB. 3. Select the any Desktop View and Click on Add/Edit Desktop View. 4. Modify the view and save. "Clinical Desktops were not updated since Overwrite was not checked" Message is when Check here to overwrite any clinical desktops that have identical names checkbox is not checked. Allscripts Enterprise EHR CMT User Guide.doc

15 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Move Clinical Desktops Content Category from the Drop down The Move Clinical Desktops Content Category is in the Content category field. 3 Verify the display of Clinical Desktop views in Source and Target data base servers in left and right columns respectively. Clinical Desktop views in Source and Target data base servers in left and right columns are respectively. 4 Select the Desktop View as per the precondition from Source Server in left column. Desktop view is selected in left column. 5 Click on Go button. Desktop View selected in 4 should be copied in target server in right column. 6 Login to EEHR (target Database server) as a provider. User should be logged in EEHR. 7 Click on Chart VTB and Clinical Desktop HTB. Select Patient Dialog should be. 8 Search and select any patient. Patient should be selected and in banner. 9 Select the desktop view selected n 4. Modifications done on desktop view in Source sever should not be reflected in target server. Allscripts Enterprise EHR CMT User Guide.doc

16 1.7. Validate that the images are and updated on the source server and not updated on the target server when Check for updated images : Validate that the images are which is updated on the source server and not updated on the target server when Check for updated images. 1. Create a Symptom form in Note Admin in EEHR Source sever. 2. Transfer the Symptom form from Source server to target server. 3. Modify the Symptom form created in in EEHR Source server. Images are which is updated on the source server and not updated on the target server, when Check for updated images. Allscripts Enterprise EHR CMT User Guide.doc

17 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Move Note Forms Content Category from the Drop down The Move Note Forms Content Category is in the Content category field. 3 Verify the presence of "Search for all items with names like:" Checkbox. "Search for all items with names like:" Checkbox should be present. 4 Enter text with wild card % in "Search for all items with names like:" checkbox Entered criteria should be. 5 Select "Check for updated Symptom forms that have an unchanged version on the target" checkbox Check for updated Symptom forms that have an unchanged version on the target checkbox should be selected. 6 Click on Go button. Symptom form created as per Precondition 3 should be in search results. Allscripts Enterprise EHR CMT User Guide.doc

18 1.8. Validate that the Inactive details and symptom forms are in selected database with Form, Form UID, Detail Form, Symptom, Original name from XML,WK ID and Comments are when Check detail forms & symptom forms is checked : Validate that the Inactive and missing details and symptom forms are in selected database with Form, Form UID, Detail Form, Symptom, Original name from XML, WK ID and Comments are when Check detail forms & symptom forms is checked. Inactive and missing details and symptom forms are in selected database with Form, Form UID, Detail Form, Symptom, Original name from XML, WK ID and Comments should be when Check detail forms & symptom forms is checked. Allscripts Enterprise EHR CMT User Guide.doc

19 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Check for missing Note form Components Content Category from the drop down Check for missing Note form Components Content Category is in the Content category field. 3 Validate that the Inactive and missing details and symptom forms are in selected database with Form, Form UID, Detail Form, Symptom, Original name from XML, WK ID and Comments are when Check detail forms & symptom forms is checked. Inactive and missing details and symptom forms are in selected database with Form, Form UID, Detail Form, Symptom, Original name from XML,WK ID and Comments should be when Check detail forms & symptom forms is checked. Allscripts Enterprise EHR CMT User Guide.doc

20 1.9. Validate that the Inactive graphics or hotspots are in selected database with Form, Form UID, Graphic and Hotspot and comments are when Check Graphics & hotspots is checked : Validate that the Inactive and missing graphics or hotspots are in selected database with Form, Form UID, Graphic and Hotspot and comments are when Check Graphics & hotspots is checked. Inactive and missing graphics or hotspots are in selected database with Form, Form UID, Graphic and Hotspot and comments are when Check Graphics & hotspots is checked. Allscripts Enterprise EHR CMT User Guide.doc

21 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Check for missing Note form Components Content Category from the drop down Check for missing Note form Components Content Category is in the Content category field. 3 Validate that the Inactive and missing graphics or hotspots are in selected database with Form, Form UID, Graphic and Hotspot and comments are when Check Graphics & hotspots is checked. Inactive and missing graphics or hotspots are in selected database with Form, Form UID, Graphic and Hotspot and comments should be when Check Graphics & hotspots is checked. Allscripts Enterprise EHR CMT User Guide.doc

22 1.10. Validate that the list of all note input templates and associated note forms are when Go button is clicked : Validate that the list of all note input templates and associated note forms are when Go button is clicked. List of all note input templates and associated note forms are when Go button is clicked. s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Move Note Templates Content Category from the drop down The Move Note Templates Content Category is in the Content category field. 3 Validate that the list of all note input templates and associated note forms are when Go button is clicked. List of all note input templates and associated note forms are when Go button is clicked. Allscripts Enterprise EHR CMT User Guide.doc

23 1.11. Validate that the missing Note Input Templates that contains forms that are missing detail or symptom forms in the selected database are with Template ID, Template, Form UID, Form, Missing Detail Form, Missing Symptom, WK ID : Validate that the Inactive and missing details and symptom forms are in selected database with Form, Form UID, Detail Form, Symptom, Original name from XML,WK ID and Comments are when Check detail forms & symptom forms is checked. Inactive and missing details and symptom forms are in selected database with Form, Form UID, Detail Form, Symptom, Original name from XML, WK ID and Comments should be when Check detail forms & symptom forms is checked. Allscripts Enterprise EHR CMT User Guide.doc

24 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Check for missing Note form Components Content Category from the drop down Check for missing Note form Components Content Category is in the Content category field. 3 Validate that the missing Note Input Templates that contains forms that are missing detail or symptom forms in the selected database are with Template ID, Template, Form UID, Form, Missing Detail Form, Missing Symptom, WK ID and Comments when Check Note Input Templates is checked. Missing Note Input Templates that contains forms that are missing detail or symptom forms in the selected database should be with Template ID, Template, Form UID, Form, Missing Detail Form, Missing Symptom, WK ID and Comments when Check Note Input Templates is checked. Allscripts Enterprise EHR CMT User Guide.doc

25 1.12. Validate that the new note input templates along with note forms are from the selected database when Show Note Templates and Show Note forms used in Templates are checked : Validate that the new note input templates along with note forms are from the selected database when Show Note Templates and Show Note forms used in Templates are checked. new note input templates along with note forms are from the selected database when Show Note Templates and Show Note forms used in Templates are checked. Allscripts Enterprise EHR CMT User Guide.doc

26 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Display New Note Catalog Content Category from the drop down The Display New Note Catalog Content Category is in the Content category field. 3 Select Source from Display New Note catalog from which server? radio list. Source radio button should be selected. 4 Select Show Note Templates? checkbox. Show Note Templates? checkbox should be selected. 5 Select Show Note forms used in Templates? checkbox. Show Note forms used in Templates? checkbox should be selected. 6 Click on Go button. New Note Templates along with Note forms from Source server should be. 7 Select target from Display New Note catalog from which server? radio list. Target radio button should be selected. 8 Repeat steps 4, 5, and 6. New Note Templates along with Note forms from Target server should be. Allscripts Enterprise EHR CMT User Guide.doc

27 1.13. Validate that the new note input templates are from the selected database when Show Note Templates is checked. : Validate that the new note input templates are from the selected database when Show Note Templates is checked. new note input templates are from the selected database when Show Note Templates is checked. Allscripts Enterprise EHR CMT User Guide.doc

28 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Display New Note Catalog Content Category from the drop down The Display New Note Catalog Content Category is in the Content category field. 3 Select Source from Display New Note catalog from which server? radio list. Source radio button should be selected. 4 Select Show Note Templates? checkbox. Show Note Templates? checkbox should be selected. 5 Click on Go button. New Note Templates from Source server should be. 6 Select target from Display New Note catalog from which server? radio list. Target radio button should be selected. 7 Repeat steps 4 and 5. New Note Templates from Target server should be. Allscripts Enterprise EHR CMT User Guide.doc

29 1.14. Validate the note forms are where are modified on both source server and target server having same originating IDs but different Form IDs, when Check for updated note forms that have a locally edited version on the target : Validate that the note forms are where are modified on both source server and target server having same originating IDs but different Form IDs, when Check for updated note forms that have a locally edited version on the target. 1. Create a note form in Note Admin in EEHR Source sever. 2. Transfer the note form from Source server to EEHR target server. 3. Modify the note form created in in EEHR target server. Note forms are where are modified on both source server and target server having same originating IDs but different Form IDs, when Check for updated note forms that have a locally edited version on the target. Allscripts Enterprise EHR CMT User Guide.doc

30 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Move Note Forms Content Category from the drop down The Move Note Forms Content Category is in the Content category field. 3 Verify the presence of "Search for all items with names like:" checkbox. "Search for all items with names like:" checkbox should be present. 4 Enter text with wild card % in "Search for all items with names like:" checkbox Entered criteria should be. 5 Select "Check for updated note forms that have a locally edited version on the target" checkbox Check for updated note forms that have a locally edited version on the target checkbox should be selected. 6 Click on Go button. Note form created as per Precondition 3 should be in search results. Allscripts Enterprise EHR CMT User Guide.doc

31 1.15. Validate that the note forms are where version of note form on the source server is updated and version of note form is not updated on the target server, when Check for updated note forms that have an unchanged version on the target : Validate that the note forms are where version of note form on the source server is updated and version of note form is not updated on the target server, when Check for updated note forms that have an unchanged version on the target. 1. Create a note form in Note Admin in EEHR Source sever. 2. Transfer the note form from Source server to target server. 3. Modify the note form created in in EEHR Source server. Note forms are where version of note form on the source server is updated and version of note form is not updated on the target server, when Check for updated note forms that have an unchanged version on the target. Allscripts Enterprise EHR CMT User Guide.doc

32 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Move Note Forms Content Category from the drop down The Move Note Forms Content Category is in the Content category field. 3 Verify the presence of "Search for all items with names like:" checkbox. "Search for all items with names like:" checkbox should be present. 4 Enter text with wild card % in "Search for all items with names like:" checkbox Entered criteria should be. 5 Select "Check for updated note forms that have an unchanged version on the target" checkbox Check for updated note forms that have an unchanged version on the target checkbox should be selected. 6 Click on Go button. Note form created as per Precondition 3 should be in search results. Allscripts Enterprise EHR CMT User Guide.doc

33 1.16. Validate that the note forms are which exist on the source server and also which does not have corresponding form on the target server, when Check for New note forms that have no previous version on the target : Validate that the note forms are which exist on the source server and also which does not have corresponding form on the target server, when Check for New note forms that have no previous version on the target Create a note form in Note Admin in EEHR Source sever. Note forms are which exist on the source server and also which does not have corresponding form on the target server, when Check for New note forms that have no previous version on the target Allscripts Enterprise EHR CMT User Guide.doc

34 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Move Note Forms Content Category from the drop down The Move Note Forms Content Category is in the Content category field. 3 Verify the presence of "Search for all items with names like:" checkbox. "Search for all items with names like:" checkbox should be present. 4 Enter text with wild card % in "Search for all items with names like:" checkbox Entered criteria should be. 5 Select "Check for New note forms that have no previous version on the target" checkbox Check for New note forms that have no previous version on the target checkbox should be selected. 6 Click on Go button. Note form created as per condition should be in search results. Allscripts Enterprise EHR CMT User Guide.doc

35 1.17. Validate that the note forms with subforms are copied when Move Forms button is clicked : Validate that the note forms with subforms are copied when Move Forms button is clicked Create a note form with subforms in Note Admin in EEHR Source sever. Note forms with subforms are copied when Move Forms button is clicked. Allscripts Enterprise EHR CMT User Guide.doc

36 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Move Note Forms Content Category from the drop down The Move Note Forms Content Category is in the Content category field. 3 Verify the presence of "Search for all items with names like:" checkbox. "Search for all items with names like:" checkbox should be present. 4 Enter text with wild card % in "Search for all items with names like:" checkbox Entered criteria should be. 5 Select "Check for New note forms that have no previous version on the target" checkbox Check for New note forms that have no previous version on the target checkbox should be selected. 6 Click on Go button. Note form created as per condition should be in search results. 7 Select the note form in search results. Selected note form should be selected. 8 Validate that the subforms that currently exist only in Source server are with a radio button when next button is clicked. Subforms that currently exist only in Source server are with a radio button when next button is clicked. 9 Validate that the note forms with subforms are copied when Move Forms button is clicked. Note forms with subforms should be copied when Move Forms button is clicked. Allscripts Enterprise EHR CMT User Guide.doc

37 1.18. Validate that the only new entries are copied to the target server and existing entries are not modified or updated when Go button is clicked : Validate that the only new entries are copied to the target server and existing entries are not modified or updated when Go button is clicked. Create an OID and RID in EEHR Source Server. Only new entries are copied to the target server and existing entries are not modified or updated when Go button is clicked. s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Move OID & RID Content Category from the drop down The Move OID & RID Content Category is in the Content category field. 3 Select the Is this what you want to do check box. Is this what you want to do check box should be selected. 4 Validate that the only new entries (as per precondition) are copied to the target server and existing entries are not modified or updated when the Go button is clicked. Only new entries (as per precondition) are copied to the target server and existing entries are not modified or updated when the Go button is clicked. Allscripts Enterprise EHR CMT User Guide.doc

38 1.19. Validate that the only new images are from the selected database when Show Graphics is checked : Validate that the only new images are from the selected database when Show Graphics is checked. only new images are from the selected database when Show Graphics is checked. Allscripts Enterprise EHR CMT User Guide.doc

39 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Display New Note Catalog Content Category from the drop down The Display New Note Catalog Content Category is in the Content category field. 3 Select Source from Display New Note catalog from which server? radio list. Source radio button should be selected. 4 Select Show Graphics? Checkbox. Show Graphics? checkbox should be selected. 5 Click on Go button. New images from Source server should be. 6 Select target from Display New Note catalog from which server? radio list. Target radio button should be selected. 7 Repeat steps 3, 4, and 5. New images from Target server should be. Allscripts Enterprise EHR CMT User Guide.doc

40 1.20. Validate that the only new note forms are from the selected database when Show Note forms is checked. : Validate that the only new note forms are from the selected database when Show Note forms is checked. only new note forms are from the selected database when Show Note forms is checked. Allscripts Enterprise EHR CMT User Guide.doc

41 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Display New Note Catalog Content Category from the drop down The Display New Note Catalog Content Category is in the Content category field. 3 Select Source from Display New Note catalog from which server? radio list. Source radio button should be selected. 4 Select Show Note forms? checkbox. Show Note forms? checkbox should be selected. 5 Click on Go button. Note forms from Source server should be. 6 Select target from Display New Note catalog from which server? radio list. Target radio button should be selected. 7 Repeat steps 3, 4, and 5. Note forms from Target server should be. Allscripts Enterprise EHR CMT User Guide.doc

42 1.21. Validate that the only new symptom forms are from the selected database when Show Symptom forms is checked : Validate that the only new symptom forms are from the selected database when Show Symptom forms is checked. only new symptom forms are from the selected database when Show Note forms is checked. Allscripts Enterprise EHR CMT User Guide.doc

43 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Display New Note Catalog Content Category from the drop down The Display New Note Catalog Content Category is in the Content category field. 3 Select Source from Display New Note catalog from which server? radio list. Source radio button should be selected. 4 Select Show Symptom Forms? checkbox. Show Symptom Forms? checkbox should be selected. 5 Click on Go button. Symptom Forms from Source server should be. 6 Select target from Display New Note catalog from which server? radio list. Target radio button should be selected. 7 Repeat steps 3, 4, and 5. Symptom Forms from Target server should be. Allscripts Enterprise EHR CMT User Guide.doc

44 1.22. Validate that the only note forms are but not symptom forms which are changed after a specified date when date is entered in Show only items modified after field : Validate that the only note forms are but not symptom forms which are changed after a specified date when date is entered in "Show only items modified after:" field Note forms are but not symptom forms which are changed after a specified date when date is entered in "Show only items modified after:" field Allscripts Enterprise EHR CMT User Guide.doc

45 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Move Note Forms Content Category from the drop down The Move Note Forms Content Category is in the Content category field. 3 Verify the presence of "Search for all items with names like: " checkbox. "Search for all items with names like:" checkbox should be present. 4 Enter text with wild card % in "Search for all items with names like:" checkbox Entered criteria should be. 5 Select "Check for New note forms that have no previous version on the target" checkbox Check for New note forms that have no previous version on the target checkbox should be selected. 6 Enter any valid date in Show only items modified after: field in the format mm/dd/yyyy Entered date should be in "Show only items modified after:" field. 7 Click on Go button. Only Note forms without symptom forms based on entered criteria in 4, 5, and 6 should be in search results. Allscripts Enterprise EHR CMT User Guide.doc

46 1.23. Validate that the subforms that currently exist only in Source server are with a radio button when next button is clicked : Validate that the subforms that currently exist only in Source server are with a radio button when next button is clicked. Create a note form with subforms in Note Admin in EEHR Source sever. Subforms that currently exist only in Source server are with a radio button when next button is clicked. Allscripts Enterprise EHR CMT User Guide.doc

47 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Move Note Forms Content Category from the drop down The Move Note Forms Content Category is in the Content category field. 3 Verify the presence of "Search for all items with names like:" checkbox. "Search for all items with names like:" checkbox should be present. 4 Enter text with wild card % in "Search for all items with names like:" checkbox Entered criteria should be. 5 Select "Check for New note forms that have no previous version on the target" checkbox Check for New note forms that have no previous version on the target checkbox should be selected. 6 Click on Go button. Note form created as per condition should be in search results. 7 Select the note form in search results. Selected note form should be selected. 8 Validate that the subforms that currently exist only in Source server are with a radio button when next button is clicked. Subforms that currently exist only in Source server are with a radio button when next button is clicked. Allscripts Enterprise EHR CMT User Guide.doc

48 1.24. Validate that the symptom forms are where version of note form on the source server is updated and version of symptom form is not updated on the target server, when Check for updated symptom forms that have an unchanged version on the target : Validate that the symptom forms are where version of note form on the source server is updated and version of symptom form is not updated on the target server, when Check for updated symptom forms that have an unchanged version on the target. 1. Create a Symptom form in Note Admin in EEHR Source sever. 2. Transfer the Symptom form from Source server to target server. 3. Modify the Symptom form created in in EEHR Source server. Symptom forms are where version of note form on the source server is updated and version of symptom form is not updated on the target server, when Check for updated symptom forms that have an unchanged version on the target. Allscripts Enterprise EHR CMT User Guide.doc

49 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Move Note Forms Content Category from the drop down The Move Note Forms Content Category is in the Content category field. 3 Verify the presence of "Search for all items with names like:" checkbox. "Search for all items with names like:" checkbox should be present. 4 Enter text with wild card % in "Search for all items with names like:" checkbox Entered criteria should be. 5 Select "Check for updated Symptom forms that have an unchanged version on the target" checkbox Check for updated Symptom forms that have an unchanged version on the target checkbox should be selected. 6 Click on Go button. Symptom form created as per Precondition 3 should be in search results. Allscripts Enterprise EHR CMT User Guide.doc

50 1.25. Validate that the symptom forms are where are modified on both source server and target server having same originating IDs but different Form IDs, when Check for updated Symptom forms that have a locally edited version on the target : Validate that the symptom forms are where are modified on both source server and target server having same originating IDs but different Form IDs, when Check for updated Symptom forms that have a locally edited version on the target. 1. Create a Symptom form in Note Admin in EEHR Source sever. 2. Transfer the Symptom form from Source server to EEHR target server. 3. Modify the Symptom form created in in EEHR target server. Symptom forms are where are modified on both source server and target server having same originating IDs but different Form IDs, when Check for updated Symptom forms that have a locally edited version on the target. Allscripts Enterprise EHR CMT User Guide.doc

51 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Move Note Forms Content Category from the drop down The Move Note Forms Content Category is in the Content category field. 3 Verify the presence of "Search for all items with names like:" checkbox. "Search for all items with names like:" checkbox should be present. 4 Enter text with wild card % in "Search for all items with names like:" checkbox Entered criteria should be. 5 Select "Check for updated Symptom forms that have a locally edited version on the target" checkbox Check for updated Symptom forms that have a locally edited version on the target checkbox should be selected. 6 Click on Go button. Symptom form created as per Precondition 3 should be in search results. Allscripts Enterprise EHR CMT User Guide.doc

52 1.26. Validate that the symptom forms are which exist on the source server and also which does not have corresponding form on the target server, when Check for New symptom forms that have no previous version on the target. : Validate that the symptom forms are which exist on the source server and also which does not have corresponding form on the target server, when Check for New symptom forms that have no previous version on the target. Create a Symptom form in Note Admin in EEHR Source sever. Symptom forms are which exist on the source server and also which does not have corresponding form on the target server, when Check for New symptom forms that have no previous version on the target. Allscripts Enterprise EHR CMT User Guide.doc

53 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Move Note Forms Content Category from the drop down The Move Note Forms Content Category is in the Content category field. 3 Verify the presence of "Search for all items with names like:" checkbox. "Search for all items with names like:" checkbox should be present. 4 Enter text with wild card % in "Search for all items with names like:" checkbox Entered criteria should be. 5 Select "Check for New Symptom forms that have no previous version on the target" checkbox Check for New Symptom forms that have no previous version on the target checkbox should be selected. 6 Click on Go button. Symptom form created as per condition should be in search results. Allscripts Enterprise EHR CMT User Guide.doc

54 1.27. Validate that the target desktop view is overwritten by the versions from source database when Check here to overwrite any clinical desktops that have identical names checkbox is checked. : Validate that the target desktop view is overwritten by the versions from source database when Check here to overwrite any clinical desktops that have identical names checkbox is checked. 1. Login to EEHR (Source Database server) as twadmin. 2. Click on WorkDef Admin VTB and Workspace Definitions HTB. 3. Select the any Desktop View and Click on Add/Edit Desktop View. 4. Modify the view and save. Target desktop view is overwritten by the versions from source database when Check here to overwrite any clinical desktops that have identical names checkbox is checked. Allscripts Enterprise EHR CMT User Guide.doc

55 s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button 2 Select the Move Clinical Desktops Content Category from the drop down The Move Clinical Desktops Content Category is in the Content category field. 3 Verify the display of Clinical Desktop views in Source and Target data base servers in left and right columns respectively. Clinical Desktop views in Source and Target data base servers in left and right columns are respectively. 4 Select the Desktop View as per the precondition from Source Server in left column. Desktop view is selected in left column. 5 Select "Check here to Overwrite any Clinical Desktops that have identical names" checkbox "Check here to Overwrite any Clinical Desktops that have identical names" should be selected. 6 Click on Go button. Desktop View selected in 4 should be overwritten in target server in right column. 7 Login to EEHR (target Database server) as a provider. User should be logged in EEHR. 8 Click on Chart VTB and Clinical Desktop HTB. Select Patient Dialog should be. 9 Search and select any patient. Patient should be selected and in banner. 0 Select the desktop view selected n 4. Modified desktop view should be. Allscripts Enterprise EHR CMT User Guide.doc

56 1.28. Validate that wild card search is allowed in Search for all items with names like checkbox : Validate that wild card search is allowed in Search for all items with names like checkbox. Wild card search is allowed in Search for all items with names like checkbox. s: Server, Source DB name, Source DB User and Enter the Target DB Server, Target DB name, Click on the Login button.. 2 Select the Move Note Forms Content Category from the drop down The Move Note Forms Content Category is in the Content category field. 3 Enter text with wild card ( Ex: aus%, %Cystoscopy%, or %) in "Search for all items with names like:" checkbox Entered criteria should be. 4 Click on Go button. Search results based on entered criteria should be. Allscripts Enterprise EHR CMT User Guide.doc

57 1.29. Plan: Test : Validate the copying of OID and RID : Validate the copying of following OID and RID. Additional Information Answer Class Answer Body Site Charge Code Financial Auth Status Insurance Label Type OID - Additional Information Questions OID - Orderable Item Order Defaults Ins PatLoc Site Order Defaults Insurance Order Defaults Req Perf Location Order Defaults Req Perf Site Order Modifier Order Performing Facility Identifiers Order Reason Order Result - V11 Picklists Referral Type Requested Performing Location Result Flow graphs Result Reference Ranges Results Where Performed Identifiers Results Where Performed RID - Results Security Codes Sites Specialty Specimen Source Unit Codes Where Performed Identifiers Following OID and RID should be copied Additional Information Allscripts Enterprise EHR CMT User Guide.doc

Meaningful Use Reporting Quick Reference

Meaningful Use Reporting Quick Reference Allscripts Professional EHR 9.2 none Copyright 2010 Allscripts Healthcare Solutions, Inc. www.allscripts.com Copyright 2010 Allscripts Healthcare Solutions, Inc. This document is the confidential property

More information

Understanding how to use the Quality Measure Step by Step Documents

Understanding how to use the Quality Measure Step by Step Documents Understanding how to use the Quality Measure Step by Step Documents Step 1: Quality Measure Selection o The first step for Quality Measures is to ensure you know what the measures are looking for from

More information

Universal Health Record Patient Access v2.2.4 User Guide

Universal Health Record Patient Access v2.2.4 User Guide Allscripts FollowMyHealth Universal Health Record Patient Access v2.2.4 User Guide Copyright 2015 Allscripts Healthcare, LLC and/or its affiliates. All Rights Reserved. www.allscripts.com Published Date:

More information

Polar Help Desk 4.1. User s Guide

Polar Help Desk 4.1. User s Guide Polar Help Desk 4.1 User s Guide Copyright (legal information) Copyright Polar 1995-2005. All rights reserved. The information contained in this document is proprietary to Polar and may not be used or

More information

FollowMyHealth Universal Health Record Patient Access v2.2.1 User Guide

FollowMyHealth Universal Health Record Patient Access v2.2.1 User Guide Allscripts Software FollowMyHealth Universal Health Record Patient Access v2.2.1 User Guide Copyright 2014 Allscripts Healthcare, LLC and/or its affiliates. All Rights Reserved. www.allscripts.com Published

More information

Outlook Profile Setup Guide Exchange 2010 Quick Start and Detailed Instructions

Outlook Profile Setup Guide Exchange 2010 Quick Start and Detailed Instructions HOSTING Administrator Control Panel / Quick Reference Guide Page 1 of 9 Outlook Profile Setup Guide Exchange 2010 Quick Start and Detailed Instructions Exchange 2010 Outlook Profile Setup Page 2 of 9 Exchange

More information

A Unique, Innovative Company. Tips & Tricks to make Enterprise EHR Work better for your Organization

A Unique, Innovative Company. Tips & Tricks to make Enterprise EHR Work better for your Organization A Unique, Innovative Company Tips & Tricks to make Enterprise EHR Work better for your Organization Welcome! Presenters: Jennifer Oelenberger: Director of System Administration EHR Concepts is a unique,

More information

AvePoint Tags 1.1 for Microsoft Dynamics CRM. Installation and Configuration Guide

AvePoint Tags 1.1 for Microsoft Dynamics CRM. Installation and Configuration Guide AvePoint Tags 1.1 for Microsoft Dynamics CRM Installation and Configuration Guide Revision G Issued August 2014 Table of Contents About AvePoint Tags for Microsoft Dynamics CRM... 3 Required Permissions...

More information

InQFlow. Administrator Guide. Copyright @ March 2009 Constellation HomeBuilder Systems, Inc. All right reserved

InQFlow. Administrator Guide. Copyright @ March 2009 Constellation HomeBuilder Systems, Inc. All right reserved Administrator Guide Copyright @ March 2009 Constellation HomeBuilder Systems, Inc. All right reserved Product and Company Information Product and Company Information The information in this document is

More information

Secure message (e-referral) intake User Guide 2015

Secure message (e-referral) intake User Guide 2015 Secure message (e-referral) intake User Guide 2015 (Version 5.4) This publication is protected by copyright, remains the property of HEALTHCONNEX and is provided under specific product licence only. No

More information

How To Upgrade Your Microsoft SQL Server for Accounting CS Version 2012.1

How To Upgrade Your Microsoft SQL Server for Accounting CS Version 2012.1 How To Upgrade Your Microsoft SQL Server for Version 2012.1 The first step is to gather important information about your existing configuration. Identify The Database Server and SQL Server Version The

More information

Integrating Oracle Sales Cloud, Release 9 with JD Edwards EnterpriseOne release 9.1 Implementation Guide

Integrating Oracle Sales Cloud, Release 9 with JD Edwards EnterpriseOne release 9.1 Implementation Guide December 2014 Integrating Oracle Sales Cloud, Release 9 with JD Edwards EnterpriseOne release 9.1 Implementation Guide Doc version 1.0 Copyright 2005, 2014 Oracle and/or its affiliates. All rights reserved.

More information

AvePoint SearchAll 3.0.2 for Microsoft Dynamics CRM

AvePoint SearchAll 3.0.2 for Microsoft Dynamics CRM AvePoint SearchAll 3.0.2 for Microsoft Dynamics CRM Installation and Configuration Guide Revision E Issued April 2014 1 Table of Contents Overview... 3 Before You Begin... 4 Supported and Unsupported Web

More information

Stage 2 Meaningful Use - Core Measure 11 Generate Patient Lists Configuration Guide

Stage 2 Meaningful Use - Core Measure 11 Generate Patient Lists Configuration Guide Enterprise EHR Stage 2 Meaningful Use - Core Measure 11 Generate Patient Lists Configuration Guide Last Updated: November 8, 2013 Copyright 2013 Allscripts Healthcare, LLC. www.allscripts.com MU Core 11

More information

HP Application Lifecycle Management

HP Application Lifecycle Management HP Application Lifecycle Management Software Version: 11.00 Microsoft Word Add-in Guide Document Release Date: November 2010 Software Release Date: October 2010 Legal Notices Warranty The only warranties

More information

Integrating LANGuardian with Active Directory

Integrating LANGuardian with Active Directory Integrating LANGuardian with Active Directory 01 February 2012 This document describes how to integrate LANGuardian with Microsoft Windows Server and Active Directory. Overview With the optional Identity

More information

Infor SyteLine Integration Guide for Infor Factory Track

Infor SyteLine Integration Guide for Infor Factory Track Infor SyteLine Integration Guide for Infor Factory Track Copyright 2014 Infor Important Notices The material contained in this publication (including any supplementary information) constitutes and contains

More information

Central and Remote Users Guide

Central and Remote Users Guide Central and Remote Users Guide Proprietary Rights Notice 1985-2006 IDEXX Laboratories, Inc. All rights reserved. Information in this document is subject to change without notice. Practice names, doctors,

More information

Stewardship Data Management User Guide

Stewardship Data Management User Guide Stewardship Data Management User Guide (for Data Provider) ECCnet ProSYNC 10.6 Copyright 2013 GS1 Canada 1 Stewardship Data Management User Guide The information contained in this document is privileged

More information

Optum Physician EMR v 8.0 Release Notes

Optum Physician EMR v 8.0 Release Notes Optum Physician EMR v 8.0 Release Notes OptumInsight 70 Royal Little Drive Providence, RI 02904 Copyright 2002-2014 OptumInsight. All rights reserved. Document Information Author(s) Release Date G.Caldera

More information

QUANTIFY INSTALLATION GUIDE

QUANTIFY INSTALLATION GUIDE QUANTIFY INSTALLATION GUIDE Thank you for putting your trust in Avontus! This guide reviews the process of installing Quantify software. For Quantify system requirement information, please refer to the

More information

Guidance and Instructions on Configuring Access and Auditing. NYC Dept. of Health and Mental Hygiene. Primary Care Information Project

Guidance and Instructions on Configuring Access and Auditing. NYC Dept. of Health and Mental Hygiene. Primary Care Information Project Guidance and Instructions on Configuring Access and Auditing NYC Dept. of Health and Mental Hygiene Primary Care Information Project Privacy and Security Guidelines for PCIP Participating Practices Purpose:

More information

ProSystem fx Engagement

ProSystem fx Engagement ProSystem fx Engagement Admin Guide October 2009 Copyright 2009 CCH INCORPORATED. A Wolters Kluwer business. All Rights Reserved. Material in this publication may not be reproduced or transmitted, in any

More information

Resource Online User Guide JUNE 2013

Resource Online User Guide JUNE 2013 Resource Online User Guide JUNE 2013 CHASE PAYMENTECH SOLUTIONS MAKES NO WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, WITH REGARD TO THIS MATERIAL, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

More information

Providers can access the precertification tool by logging in to the Amerigroup provider self service website or the Availity Web Portal.

Providers can access the precertification tool by logging in to the Amerigroup provider self service website or the Availity Web Portal. Precertification Status and Appeals Use the Amerigroup Provider self service website to check the status of a precertification request, submit a request for Amerigroup to change a decision we made on a

More information

HP Quality Center. Software Version: 9.20. Version Control Add-in Guide

HP Quality Center. Software Version: 9.20. Version Control Add-in Guide HP Quality Center Software Version: 9.20 Version Control Add-in Guide Document Number: QCGENVC9.2/01 Document Release Date: May 2007 Software Release Date: May 2007 Legal Notices Warranty The only warranties

More information

TOPS Internet Backup Service User Guide

TOPS Internet Backup Service User Guide TOPS Internet Backup Service User Guide By TOPS Software, LLC Clearwater, Florida Document History Version Edition Date Document Software Trademark Copyright First Edition 09 2006 TOPS IBF AA 3.2.1 The

More information

How to Register or Update Contacts on Sage Software Online

How to Register or Update Contacts on Sage Software Online How to Register or Update Contacts on Sage Software Online Getting Started: To use Sage Software Online, you must be an authorized contact at a company with an active maintenance and support agreement

More information

Strong Authentication for Juniper Networks SSL VPN

Strong Authentication for Juniper Networks SSL VPN Strong Authentication for Juniper Networks SSL VPN with Powerful Authentication Management for Service Providers and Enterprises Authentication Service Delivery Made EASY Copyright Copyright 2011. CRYPTOCard

More information

Online Statements. About this guide. Important information

Online Statements. About this guide. Important information Online Statements About this guide This guide shows you how to: View online statements, including CommBiz Activity Statements (Billing summaries) and online statements for Transaction Accounts, Credit

More information

Microsoft Dynamics CRM Adapter for Microsoft Dynamics GP

Microsoft Dynamics CRM Adapter for Microsoft Dynamics GP Microsoft Dynamics Microsoft Dynamics CRM Adapter for Microsoft Dynamics GP May 2010 Find updates to this documentation at the following location. http://go.microsoft.com/fwlink/?linkid=162558&clcid=0x409

More information

How To Use Swol On Pcode (For Athletes)

How To Use Swol On Pcode (For Athletes) 101 Tosca Drive Stoughton, MA 02072 USA (Phone) 781.297-2034 (FAX) 781.297-2039 (Web) www.csmisolutions.com SportsWareOnLine User Manual SportsWare and SportsWareOnLine are trademarks of Computer Sports

More information

Dues & Billing. Dues & Billing. I. Dues and Billing Overview. Welcome to Dues and Billing!

Dues & Billing. Dues & Billing. I. Dues and Billing Overview. Welcome to Dues and Billing! Dues & Billing I. Dues and Billing Overview Welcome to Dues and Billing! This feature allows you to create batches of invoices and specify members as recipients. The current functionality allows you to

More information

E-Z Frame-MaximEyes EHR Integration Users Guide For E-Z Frame Versions 3.0.2.0 and Higher

E-Z Frame-MaximEyes EHR Integration Users Guide For E-Z Frame Versions 3.0.2.0 and Higher E-Z Frame-MaximEyes EHR Integration Users Guide For E-Z Frame Versions 3.0.2.0 and Higher This guide will explain the workflow and interactions between E-Z Frame and MaximEyes EHR once the two systems

More information

Master Reference Guide. Allscripts v11.1.7 Non-Clinical Reference Guide

Master Reference Guide. Allscripts v11.1.7 Non-Clinical Reference Guide Master Reference Guide Allscripts v11.1.7 Non-Clinical Reference Guide All the speakers and planning committee members have listed no financial interest/arrangement that would be considered a conflict

More information

Connector for Microsoft Dynamics Configuration Guide for Microsoft Dynamics SL

Connector for Microsoft Dynamics Configuration Guide for Microsoft Dynamics SL Microsoft Dynamics Connector for Microsoft Dynamics Configuration Guide for Microsoft Dynamics SL Revised August, 2012 Find updates to this documentation at the following location: http://www.microsoft.com/download/en/details.aspx?id=10381

More information

Security Assertion Markup Language (SAML) Site Manager Setup

Security Assertion Markup Language (SAML) Site Manager Setup Security Assertion Markup Language (SAML) Site Manager Setup Trademark Notice Blackboard, the Blackboard logos, and the unique trade dress of Blackboard are the trademarks, service marks, trade dress and

More information

Selection Manager: Quick Start Guide

Selection Manager: Quick Start Guide VERSION 1103 01.24.12 SELECTION MANAGER GUIDE Selection Manager: Quick Start Guide PART 1: GENERAL INFORMATION Selection Manager is the hiring official s interface for USA Staffing. In Selection Manager,

More information

DCA. Document Control & Archiving USER S GUIDE

DCA. Document Control & Archiving USER S GUIDE DCA Document Control & Archiving USER S GUIDE Decision Management International, Inc. 1111 Third Street West Suite 250 Bradenton, FL 34205 Phone 800-530-0803 FAX 941-744-0314 www.dmius.com Copyright 2002,

More information

Sage HRMS 2014 Sage HRMS Payroll Getting Started Guide. October 2013

Sage HRMS 2014 Sage HRMS Payroll Getting Started Guide. October 2013 Sage HRMS 2014 Sage HRMS Payroll Getting Started Guide October 2013 This is a publication of Sage Software, Inc. Document version: October 18, 2013 Copyright 2013. Sage Software, Inc. All rights reserved.

More information

CRM to Exchange Synchronization

CRM to Exchange Synchronization CRM to Exchange Synchronization Installation, Configuration and End-User Instructions VERSION 1.0 DATE PREPARED: 9/1/2012 DEVELOPMENT: BRITE GLOBAL, INC. 2012 Brite Global, Incorporated. All rights reserved.

More information

WatchDox Administrator's Guide. Application Version 3.7.5

WatchDox Administrator's Guide. Application Version 3.7.5 Application Version 3.7.5 Confidentiality This document contains confidential material that is proprietary WatchDox. The information and ideas herein may not be disclosed to any unauthorized individuals

More information

AvePoint Record Rollback 3.1.2 for Microsoft Dynamics CRM

AvePoint Record Rollback 3.1.2 for Microsoft Dynamics CRM AvePoint Record Rollback 3.1.2 for Microsoft Dynamics CRM Installation and Configuration Guide Revision F Issued April 2014 1 Table of Contents Overview... 3 Obtaining the Record Rollback Solution Package...

More information

ImageNow Report Library Catalog

ImageNow Report Library Catalog ImageNow Report Library Catalog Business Insight Version: 6.6.x Written by: Product Documentation, R&D Date: February 2012 ImageNow and CaptureNow are registered trademarks of Perceptive Software, Inc.

More information

Allscripts Tips and Tricks

Allscripts Tips and Tricks Allscripts Tips and Tricks For more detailed information about a topic, such as "Transitioning an Initial Diagnosis to a Final Diagnosis," "Basic Navigation," and "e-prescribing," please download the documents

More information

ORACLE USER PRODUCTIVITY KIT USAGE TRACKING ADMINISTRATION & REPORTING RELEASE 3.6 PART NO. E17087-01

ORACLE USER PRODUCTIVITY KIT USAGE TRACKING ADMINISTRATION & REPORTING RELEASE 3.6 PART NO. E17087-01 ORACLE USER PRODUCTIVITY KIT USAGE TRACKING ADMINISTRATION & REPORTING RELEASE 3.6 PART NO. E17087-01 FEBRUARY 2010 COPYRIGHT Copyright 1998, 2009, Oracle and/or its affiliates. All rights reserved. Part

More information

PRODUCT WHITE PAPER LABEL ARCHIVE. Adding and Configuring Active Directory Users in LABEL ARCHIVE

PRODUCT WHITE PAPER LABEL ARCHIVE. Adding and Configuring Active Directory Users in LABEL ARCHIVE PRODUCT WHITE PAPER LABEL ARCHIVE Adding and Configuring Active Directory Users in LABEL ARCHIVE TEKLYNX International March 19, 2010 Introduction Now more than ever, businesses large and small alike are

More information

Gravity Forms: Creating a Form

Gravity Forms: Creating a Form Gravity Forms: Creating a Form 1. To create a Gravity Form, you must be logged in as an Administrator. This is accomplished by going to http://your_url/wp- login.php. 2. On the login screen, enter your

More information

SharePoint List Filter Favorites Installation Instruction

SharePoint List Filter Favorites Installation Instruction SharePoint List Filter Favorites Installation Instruction System Requirements Microsoft Windows SharePoint Services v3 or Microsoft Office SharePoint Server 2007. License Management Click link in Organize

More information

HDAccess Administrators User Manual. Help Desk Authority 9.0

HDAccess Administrators User Manual. Help Desk Authority 9.0 HDAccess Administrators User Manual Help Desk Authority 9.0 2011ScriptLogic Corporation ALL RIGHTS RESERVED. ScriptLogic, the ScriptLogic logo and Point,Click,Done! are trademarks and registered trademarks

More information

Staff User s Guide Task Manager. Version 20

Staff User s Guide Task Manager. Version 20 Staff User s Guide Task Manager Version 20 CONFIDENTIAL INFORMATION The information herein is the property of Ex Libris Ltd. or its affiliates and any misuse or abuse will result in economic loss. DO NOT

More information

Application Note. ShoreTel 9: Active Directory Integration. Integration checklist. AN-10233 June 2009

Application Note. ShoreTel 9: Active Directory Integration. Integration checklist. AN-10233 June 2009 Application Note AN-10233 June 2009 ShoreTel 9: Active Directory Integration This application note outlines the configuration required to prepare a customer s Microsoft Active Directory environment for

More information

Patient Portal Users Guide

Patient Portal Users Guide e-mds Solution Series Patient Portal Users Guide Version 7.0 How to Use the Patient Portal CHARTING THE FUTURE OF HEALTHCARE e-mds 9900 Spectrum Drive. Austin, TX 78717 Phone 512.257.5200 Fax 512.335.4375

More information

How To Write A File System On A Microsoft Office 2.2.2 (Windows) (Windows 2.3) (For Windows 2) (Minorode) (Orchestra) (Powerpoint) (Xls) (

How To Write A File System On A Microsoft Office 2.2.2 (Windows) (Windows 2.3) (For Windows 2) (Minorode) (Orchestra) (Powerpoint) (Xls) ( Remark Office OMR 8 Supported File Formats User s Guide Addendum Remark Products Group 301 Lindenwood Drive, Suite 100 Malvern, PA 19355-1772 USA www.gravic.com Disclaimer The information contained in

More information

MS SQL Server Database Management

MS SQL Server Database Management MS SQL Server Database Management Contents Creating a New MS SQL Database... 2 Connecting to an Existing MS SQL Database... 3 Migrating a GoPrint MS SQL Database... 5 Troubleshooting... 11 Published April

More information

Onboarding for Administrators

Onboarding for Administrators Welcome! This resource will walk you through the quick and easy steps for configuring your Paylocity Onboarding module and managing events. Login Launch Events Complete Tasks Create Records Configure Events

More information

File Management Utility User Guide

File Management Utility User Guide File Management Utility User Guide Legal Notes Unauthorized reproduction of all or part of this guide is prohibited. The information in this guide is subject to change without notice. We cannot be held

More information

Security Development Tool for Microsoft Dynamics AX 2012 WHITEPAPER

Security Development Tool for Microsoft Dynamics AX 2012 WHITEPAPER Security Development Tool for Microsoft Dynamics AX 2012 WHITEPAPER Junction Solutions documentation 2012 All material contained in this documentation is proprietary and confidential to Junction Solutions,

More information

IPedge Feature Desc. 5/25/12

IPedge Feature Desc. 5/25/12 OVERVIEW IPedge Enterprise Manager Active Directory Sync (ADSync) is a feature that automatically configures telephone users in the IPedge system based on data entry in the Active Directory service. Active

More information

How to Back Up and Restore an ACT! Database Answer ID 19211

How to Back Up and Restore an ACT! Database Answer ID 19211 How to Back Up and Restore an ACT! Database Answer ID 19211 Please note: Answer ID documents referenced in this article can be located at: http://www.act.com/support/index.cfm (Knowledge base link). The

More information

HP Quality Center. Software Version: 10.00. Microsoft Word Add-in Guide

HP Quality Center. Software Version: 10.00. Microsoft Word Add-in Guide HP Quality Center Software Version: 10.00 Microsoft Word Add-in Guide Document Release Date: February 2012 Software Release Date: January 2009 Legal Notices Warranty The only warranties for HP products

More information

Sales Person Commission

Sales Person Commission Sales Person Commission Table of Contents INTRODUCTION...1 Technical Support...1 Overview...2 GETTING STARTED...3 Adding New Salespersons...3 Commission Rates...7 Viewing a Salesperson's Invoices or Proposals...11

More information

PCLaw Administration Guide. Version 13.0

PCLaw Administration Guide. Version 13.0 PCLaw Administration Guide Version 13.0. Copyright and Trademark LexisNexis, Lexis, and the Knowledge Burst logo are registered trademarks of Reed Elsevier Properties Inc., used under license. PCLaw is

More information

CQS v3.7 System Administrator Tutorial: How to Create Advanced Dashboard Views

CQS v3.7 System Administrator Tutorial: How to Create Advanced Dashboard Views April 2013 CQS v3.7 System Administrator Tutorial: How to Create Advanced Dashboard Views CQS Support Team A Connected Community of Health Copyright 2013 Allscripts Healthcare Solutions, Inc. 1 Introduction

More information

AvePoint Record Rollback 3.1.2 for Microsoft Dynamics CRM

AvePoint Record Rollback 3.1.2 for Microsoft Dynamics CRM AvePoint Record Rollback 3.1.2 for Microsoft Dynamics CRM User Guide Revision G Issued April 2014 1 Table of Contents Overview... 3 Before You Begin... 4 Record Rollback... 5 Getting Started... 5 Locating

More information

AT&T Online Fax User Guide Version 1.0

AT&T Online Fax User Guide Version 1.0 AT&T Online Fax User Guide Version 1.0 Welcome to AT&T Website Solutions SM We are focused on providing you the very best web hosting service including all the tools necessary to establish and maintain

More information

Scribe Demonstration Script Web Leads to Dynamics CRM. October 4, 2010 www.scribesoft.com

Scribe Demonstration Script Web Leads to Dynamics CRM. October 4, 2010 www.scribesoft.com Scribe Demonstration Script Web Leads to Dynamics CRM October 4, 2010 www.scribesoft.com Important Notice No part of this publication may be reproduced, stored in a retrieval system, or transmitted in

More information

Creating a System DSN for Crystal Reports to Access a Sentinel Server Database. Configuration Guide Version 1.0

Creating a System DSN for Crystal Reports to Access a Sentinel Server Database. Configuration Guide Version 1.0 Creating a System DSN for Crystal Reports to Access a Sentinel Server Database Configuration Guide Version 1.0 July 2007 Configuration Guide Part Number: 62-14332000, V1.0 Copyright 1995-2007 Ringdale

More information

Table of Contents. Table of Contents 3

Table of Contents. Table of Contents 3 User Guide EPiServer 7 Mail Revision A, 2012 Table of Contents 3 Table of Contents Table of Contents 3 Introduction 5 About This Documentation 5 Accessing EPiServer Help System 5 Online Community on EPiServer

More information

Synthetic Monitoring Scripting Framework. User Guide

Synthetic Monitoring Scripting Framework. User Guide Synthetic Monitoring Scripting Framework User Guide Please direct questions about {Compuware Product} or comments on this document to: APM Customer Support FrontLine Support Login Page: http://go.compuware.com

More information

TROUBLESHOOTING INCORRECT REPORTING OF THE WHO CHANGED PARAMETER

TROUBLESHOOTING INCORRECT REPORTING OF THE WHO CHANGED PARAMETER TROUBLESHOOTING INCORRECT REPORTING OF THE WHO CHANGED PARAMETER TECHNICAL ARTICLE Product Version: 3.0 December/2011. Legal Notice The information in this publication is furnished for information use

More information

SPI Backup via Remote Terminal

SPI Backup via Remote Terminal FLUOR SPI Backup via Remote Terminal SmartPlant Implementation Team By Mitch Fortey Copyright 2014 Fluor Corporation all rights reserved SPI Back Up via Remote Terminal Data Backup 101 Why do we backup

More information

How to Copy A SQL Database SQL Server Express (Making a History Company)

How to Copy A SQL Database SQL Server Express (Making a History Company) How to Copy A SQL Database SQL Server Express (Making a History Company) These instructions are written for use with SQL Server Express. Check with your Network Administrator if you are not sure if you

More information

formerly Help Desk Authority 9.1.3 HDAccess Administrator Guide

formerly Help Desk Authority 9.1.3 HDAccess Administrator Guide formerly Help Desk Authority 9.1.3 HDAccess Administrator Guide 2 Contacting Quest Software Email: Mail: Web site: info@quest.com Quest Software, Inc. World Headquarters 5 Polaris Way Aliso Viejo, CA 92656

More information

EventTracker: Configuring DLA Extension for AWStats Report AWStats Reports

EventTracker: Configuring DLA Extension for AWStats Report AWStats Reports EventTracker: Configuring DLA Extension for AWStats Report AWStats Reports Publication Date: Oct 18, 2011 EventTracker 8815 Centre Park Drive Columbia MD 21045 www.eventtracker.com About This Guide Abstract

More information

Monetra Payment Software

Monetra Payment Software Monetra Payment Software Fast Start: Installation and Configuration Guide Revision: 3.0 Publication date October, 2013 Copyright 2013 Main Street Softworks, Inc. Fast Start: Installation and Configuration

More information

Getting Started The Windows SharePoint Services Window

Getting Started The Windows SharePoint Services Window QUICK Source Microsoft Windows SharePoint Services 3.0 for Windows Server 2003 Getting Started The Windows SharePoint Services Window Browser Toolbars - allow the user to navigate in the browser. Link

More information

DBMoto 6.5 Setup Guide for SQL Server Transactional Replications

DBMoto 6.5 Setup Guide for SQL Server Transactional Replications DBMoto 6.5 Setup Guide for SQL Server Transactional Replications Copyright This document is copyrighted and protected by worldwide copyright laws and treaty provisions. No portion of this documentation

More information

Client Installation Guide. Version 6.0 SP1

Client Installation Guide. Version 6.0 SP1 Client Installation Guide Version 6.0 SP1 2013 Pitney Bowes Software Inc. All rights reserved. This document may contain confidential and proprietary information belonging to Pitney Bowes Inc. and/or its

More information

91.527 - Human Computer Interaction Final Project Tutorial. Hardware Inventory Management System (HIMS) By M. Michael Nourai

91.527 - Human Computer Interaction Final Project Tutorial. Hardware Inventory Management System (HIMS) By M. Michael Nourai 91.527 - Human Computer Interaction Final Project Tutorial Hardware Inventory Management System (HIMS) By Table of Contents Introduction... 3 Running HIMS... 3 Successful Login to HIMS... 4 HIMS Main Screen...

More information

Installing LearningBay Enterprise Part 2

Installing LearningBay Enterprise Part 2 Installing LearningBay Enterprise Part 2 Support Document Copyright 2012 Axiom. All Rights Reserved. Page 1 Please note that this document is one of three that details the process for installing LearningBay

More information

TX3 Series TELEPHONE ACCESS SYSTEMS. Configurator Quick Start. Version 2.2 Mircom Copyright 2014 LT-973

TX3 Series TELEPHONE ACCESS SYSTEMS. Configurator Quick Start. Version 2.2 Mircom Copyright 2014 LT-973 TX3 Series TELEPHONE ACCESS SYSTEMS Configurator Quick Start Version 2.2 Mircom Copyright 2014 LT-973 Copyright 2014 Mircom Inc. All rights reserved. Mircom Configurator Software Guide v.2.2 for Windows

More information

CaseWare Time. CaseWare Cloud Integration Guide. For Time 2015 and CaseWare Cloud

CaseWare Time. CaseWare Cloud Integration Guide. For Time 2015 and CaseWare Cloud CaseWare Time CaseWare Cloud Integration Guide For Time 2015 and CaseWare Cloud Copyright and Trademark Notice Copyright. 2015 CaseWare International Inc. ( CWI ). All Rights Reserved. Use, duplication,

More information

How To Create A Powerpoint Intelligence Report In A Pivot Table In A Powerpoints.Com

How To Create A Powerpoint Intelligence Report In A Pivot Table In A Powerpoints.Com Sage 500 ERP Intelligence Reporting Getting Started Guide 27.11.2012 Table of Contents 1.0 Getting started 3 2.0 Managing your reports 10 3.0 Defining report properties 18 4.0 Creating a simple PivotTable

More information

Mesa DMS. Once you access the Mesa Document Management link, you will see the following Mesa DMS - Microsoft Internet Explorer" window:

Mesa DMS. Once you access the Mesa Document Management link, you will see the following Mesa DMS - Microsoft Internet Explorer window: Mesa DMS Installing MesaDMS Once you access the Mesa Document Management link, you will see the following Mesa DMS - Microsoft Internet Explorer" window: IF you don't have the JAVA JRE installed, please

More information

ICD-10 User Guide July 2015

ICD-10 User Guide July 2015 ICD-10 User Guide July 2015 Contents Introduction... 3 Set up the Crosswalk parameter... 3 Set up the ICD-10 compliance date for an insurance carrier... 4 Add the employer insurance... 6 New ICD Search

More information

The United States Office Of Personnel Management eopf System Administrator Training Manual for eopf Version 4.0.

The United States Office Of Personnel Management eopf System Administrator Training Manual for eopf Version 4.0. The United States Office Of Personnel Management eopf System Administrator Training Manual for eopf Version 4.0. Copyright 1994-2007 by Northrop Grumman. All rights reserved. Northrop Grumman, the Northrop

More information

MobileStatus Server Installation and Configuration Guide

MobileStatus Server Installation and Configuration Guide MobileStatus Server Installation and Configuration Guide Guide to installing and configuring the MobileStatus Server for Ventelo Mobilstatus Version 1.2 June 2010 www.blueposition.com All company names,

More information

SELF SERVICE RESET PASSWORD MANAGEMENT BACKUP GUIDE

SELF SERVICE RESET PASSWORD MANAGEMENT BACKUP GUIDE SELF SERVICE RESET PASSWORD MANAGEMENT BACKUP GUIDE Copyright 1998-2015 Tools4ever B.V. All rights reserved. No part of the contents of this user guide may be reproduced or transmitted in any form or by

More information

Contents Overview... 5 Configuring Project Management Bridge after Installation... 9 The Project Management Bridge Menu... 14

Contents Overview... 5 Configuring Project Management Bridge after Installation... 9 The Project Management Bridge Menu... 14 Portfolio Management Bridge for Microsoft Office Project Server User's Guide June 2015 Contents Overview... 5 Basic Principles and Concepts... 5 Managing Workflow... 7 Top-Down Management... 7 Project-Based

More information

SNOMED CT... 42 Patient Diagnosis... 44 Map inoperative codes to the operative codes with the crosswalk parameter off... 49 Map inoperative codes to

SNOMED CT... 42 Patient Diagnosis... 44 Map inoperative codes to the operative codes with the crosswalk parameter off... 49 Map inoperative codes to IMS 08242015 Build September 2015 Contents ICD-10 User Guide for EMR... 1 Introduction... 5 Parameters... 5 Set up the Crosswalk parameter... 5 Set the ICD-10 compliance date... 6 Set the default ICD search

More information

Editor Manual for SharePoint Version 1. 21 December 2005

Editor Manual for SharePoint Version 1. 21 December 2005 Editor Manual for SharePoint Version 1 21 December 2005 ii Table of Contents PREFACE... 1 WORKFLOW... 2 USER ROLES... 3 MANAGING DOCUMENT... 4 UPLOADING DOCUMENTS... 4 NEW DOCUMENT... 6 EDIT IN DATASHEET...

More information

Strong Authentication for Juniper Networks

Strong Authentication for Juniper Networks Strong Authentication for Juniper Networks SSL VPN SSO and OWA with Powerful Authentication Management for Service Providers and Enterprises Authentication Service Delivery Made EASY Copyright Copyright

More information

Orientation Course - Lab Manual

Orientation Course - Lab Manual Orientation Course - Lab Manual Using the Virtual Managed Workplace site for the lab exercises Your instructor will provide the following information before the first lab exercise begins: Your numerical

More information

Microsoft Office Live Meeting Events User s Guide

Microsoft Office Live Meeting Events User s Guide Microsoft Office Live Meeting Events User s Guide Information in this document, including URL and other Internet Web site references, is subject to change without notice. Unless otherwise noted, the companies,

More information

Meaningful Use of Certified EHR Technology with My Vision Express*

Meaningful Use of Certified EHR Technology with My Vision Express* Insight Software, LLC 3050 Universal Blvd Ste 120 Weston FL 33331-3528 Tel. 877-882-7456 www.myvisionexpress.com Meaningful Use of Certified EHR Technology with My Vision Express* Eligible Professional

More information

EHR Version 7.1 New Features

EHR Version 7.1 New Features EHR Version 7.1 New Features New Colors The color scheme has changed. There is now a combination of Green and Blue throughout the product. Login Page You can now enter your signoff password in the second

More information

Vico Licensing Management System User Guide

Vico Licensing Management System User Guide Vico Licensing Management System User Guide Table of Contents Introduction to Vico Licensing Management System... 3 Login and Password... 3 Account Details Page... 4 Vico Contact Tab... 5 Account Details

More information

AJ Shopping Cart. Administration Manual

AJ Shopping Cart. Administration Manual AJ Shopping Cart Administration Manual AJ Square Consultancy Services (p) Ltd., The Lord's Garden, #1-12, Vilacheri Main Road, Vilacheri, Madurai-625 006.TN.INDIA, Ph:+91-452-2485553, 2485554. Fax : 2484600

More information

V-Requester Add-in for Microsoft Outlook

V-Requester Add-in for Microsoft Outlook V-Requester Add-in for Microsoft Outlook User Guide This document will guide in configuring and using the V-Requester for Microsoft Outlook. Copyright 2014 V-Link http://www.vlink.is Page 1 Contents Introduction...

More information