Sede: Via Antica, 24/ S. Giovanni al Nat. UD Tel r.a. Fax
|
|
|
- Louise Malone
- 8 years ago
- Views:
Transcription
1 centro ricerche-sviluppo e laboratori prove Date received: 13/02/15 Date of issue: 05/03/ S. Giovanni al at. UD KUBIKOFF S.R.L. VIA PISAA, 80 - LOC. LE GRILLAIE BARBERIO DI VAL D'ELSA (FI) Report consists of 8 test reports. Defects before testing: one Sample name: SLICE DIMPLE CLOSED CHAIR SAMPLE Overall dimensions: 525 x 575 x 865 (h) mm List performed tests: 1. Seat and back static load test E 1728:2012+AC: Vertical load on back rest E 1728:2012+AC: Seat and back fatigue test E 1728:2012+AC: Seat front edge durability test E 1728:2012+AC: Leg forward static load test E 1728:2012+AC: Leg sideways static load test E 1728:2012+AC: Seat impact test E 1728:2012+AC: Back impact test E 1728:2012+AC:2013 Page 1 of 2
2 33048 S. Giovanni al at. UD Sample weight: ot determined Sample name: SLICE DIMPLE CLOSED CHAIR SAMPLE Side view Rear view Bottom view report relates to the sample submitted for the test and no others. Additions, deletions or alterations are not permitted. This test report must always be Page 2 of 2
3 33048 S. Giovanni al at. UD / 1 Date of test: 16/02/15 VIA PISAA, 80 - LOC. LE GRILLAIE! BARBERIO DI VAL D'ELSA (FI)! Seat and back static load test E 1728:2012+AC:2013 Seat and back static load test, clause 6.4 Seat load! Back force! umber! of cycles o defects ote: According to E 1728:2012, back force has been reduced from 700 to 620 to avoid tipping. Seat front edge static load, clause 6.5 Seat load! umber! of cycles o defects ote: The test has been carried out according to table 1 of E 16139:2013, level L2 - extreme.
4 33048 S. Giovanni al at. UD / 2 Date of test: 16/02/15 VIA PISAA, 80 - LOC. LE GRILLAIE! BARBERIO DI VAL D'ELSA (FI)! Vertical load on back rest E 1728:2012+AC:2013 Vertical static load on back rest clause 6.6 Seat! load! Downwards! force! umber of! applications o defects ote: The test has been carried out according to table 1 of E 16139:2013, level L2 - extreme.
5 33048 S. Giovanni al at. UD / 3 Date of test: 19/02/15 VIA PISAA, 80 - LOC. LE GRILLAIE! BARBERIO DI VAL D'ELSA (FI)! Seat and back fatigue test E 1728:2012+AC:2013 Seat and back fatigue test, clause 6.17 Seat force! Back force! umber! of cycles o defects ote: The test has been carried out according to table 1 of E 16139:2013, level L2 - extreme.
6 33048 S. Giovanni al at. UD / 4 Date of test: 27/02/15 VIA PISAA, 80 - LOC. LE GRILLAIE! BARBERIO DI VAL D'ELSA (FI)! Seat front edge durability test E 1728:2012+AC:2013 Seat front edge durability test clause 6.18 Points of! application Seat force! umber of! cycles 100 mm back from! the front edge o defects ote: The test has been carried out according to table 1 of E 16139:2013, level L2 - extreme.
7 33048 S. Giovanni al at. UD / 5 Date of test: 05/03/15 VIA PISAA, 80 - LOC. LE GRILLAIE! BARBERIO DI VAL D'ELSA (FI)! Leg forward static load test E 1728:2012+AC:2013 Leg forward static load test clause 6.15 Forward! horizontal force! Balancing! seat force! umber! of cycles o defects ote: The test has been carried out according to table 1 of E 16139:2013, level L2 - extreme.
8 33048 S. Giovanni al at. UD / 6 Date of test: 05/03/15 VIA PISAA, 80 - LOC. LE GRILLAIE! BARBERIO DI VAL D'ELSA (FI)! Leg sideways static load test E 1728:2012+AC:2013 Leg sideways static load test clause 6.16 Sideways! horizontal force! Balancing! seat force! umber! of cycles o defects ote: According to E 1728:2012, horizontal force has been reduced from 760 to 640 to avoid tipping. The test has been carried out according to table 1 of E 16139:2013, level L2 - extreme.
9 33048 S. Giovanni al at. UD / 7 Date of test: 05/03/15 VIA PISAA, 80 - LOC. LE GRILLAIE! BARBERIO DI VAL D'ELSA (FI)! Seat impact test E 1728:2012+AC:2013 Seat impact test clause 6.24 Mass of! impactor! kg Height! of drop! mm umber! of drops o defects ote: The test has been carried out according to table 1 of E 16139:2013, level L2 - extreme.
10 33048 S. Giovanni al at. UD / 8 Date of test: 05/03/15 VIA PISAA, 80 - LOC. LE GRILLAIE! BARBERIO DI VAL D'ELSA (FI)! Back impact test E 1728:2012+AC:2013 Back impact test clause 6.25 Angle! Mass of! impactor! kg umber! of cycles 48 6,5 10 o defects ote: The test has been carried out according to table 1 of E 16139:2013, level L2 - extreme.
TEST REPORT N 125543
centro ricerche-sviluppo Date received: 15-02-11 Date of issue: 14-03-11 33048 S. Giovanni al at. UD VIA CA' LEOCIO, 2 Report consists of 8 attached sheets. Defects before testing: one Sample name: DROP
Sede: Via Antica, 24/3 33048 S. Giovanni al Nat. UD Tel. 0432.747211 r.a. Fax 0432.747250 http://www.catas.com e-mail: lab@catas.
centro ricerche-sviluppo e laboratori prove Date received: 12-11-13 Date of issue: 02-12-13 33048 S. Giovanni al at. UD OMP S.R.L. VIA CA' LEOCIO, 2 31030 CASTELLO DI GODEGO (TV) Report consists of 6 test
Sede: Via Antica, 24/3 33048 S. Giovanni al Natisone UD Tel. 0432.747211 r.a. Fax 0432.747250 http://www.catas.com e-mail: lab@catas.
centro ricerche-sviluppo Date received: 24-07-08 Date of issue: 25-09-08 33048 S. Giovanni al atisone UD Report consists of 11 attached sheets. Sample name: VIA CA' LEOCIO, 2 PEARL 110 95691 List performed
Sede: Via Antica, 24/3 33048 S. Giovanni al Nat. UD Tel. 0432.747211 r.a. Fax 0432.747250 http://www.catas.com e-mail: lab@catas.com SAMPLE N 190197
33048 S. Giovanni al at. UD Report consists of 9 test reports. VIA CA' LEOCIO, 2 Defects before testing: one Sample name: PORTA VEEZIA BAR STOOL SAMPLE 190197 Overall dimensions: 450 x 560 x 1080 (h) mm
TEST REPORT N 106934
centro ricerche-sviluppo Date received: 07-07-09 Date of issue: 03-08-09 33048 S. Giovanni al atisone UD VIA CA' LEOCIO, 2 Report consists of 7 attached sheets. Defects before testing: one Sample name:
Sede: Via Antica, 24/3 33048 S. Giovanni al Nat. UD Tel. 0432.747211 r.a. Fax 0432.747250 http://www.catas.com e-mail: lab@catas.
centro ricerche-sviluppo e laboratori prove Date received: 06-11-12 Date of issue: 05-12-12 33048 S. Giovanni al at. UD OMP S.R.L. VIA CA' LEOCIO, 2 31030 CASTELLO DI GODEGO (TV) Report consists of 4 test
TEST REPORT N 131179
centro ricerche-sviluppo Date received: 19-07-11 Date of issue: 06-09-11 VIA CA' LEOCIO, 2 Report consists of 6 test reports. Defects before testing: one Sample name: BEETLE 131179 Overall dimensions:
! &''!! "##!$!!% ))"* **+*!, ! +* --. ' '/ + -0/* *1* 2,+3 " ** 4 "52 +4 6*" " 2 7+ 3" 1!/ +* * ( * 4 0,, *"5 ( 1 * 7
! "##!$!!% ! &''!! ()*+,,-."*,+)+ "##!$!!% ))"* **+*!,! +* --. ' '/ + -0/* *1* 2,+3 " ** 4 "52 +4 6*" " 2 7+ 3" 1!/ +* * ( * 4 0,, *"5 ( 1 * 7 7 4 6*" *"5*2,* 2, 4 0, *"5( * 2, #'%'$8 * "3 * 2,,+ 19: *
Contact person Date Reference Page Bengt-Åke Andersson 2013-11-27 3F020623A Rev1 1 (4) Wood Technology +46 10 516 54 34 bengt-ake.andersson@sp.
issued by an Accredited Testing Laboratory Contact person Bengt-Åke Andersson 2013-11-27 3F020623A Rev1 1 (4) Wood Technology +46 10 516 54 34 bengt-ake.andersson@sp.se 1002 ISO/IEC 17025 Nordic Comfort
US FMVSS 202 Final Rule
Comparison of Regulations FMVSS 202 (Current standard, Final Rule, and ) A. Application 1. Vehicles Front outboard seating positions in passenger cars, MPVs and trucks with a GVWR 4536 kg 2. Requirements
DIRECT SHEAR TEST SOIL MECHANICS SOIL MECHANICS LABORATORY DEPARTMENT OF CIVIL ENGINEERING UNIVERSITY OF MORATUWA SRI LANKA
DIRECT SHEAR TEST SOIL MECHANICS SOIL MECHANICS LABORATORY DEPARTMENT OF CIVIL ENGINEERING UNIVERSITY OF MORATUWA SRI LANKA DIRECT SHEAR TEST OBJEVTIVES To determine the shear strength parameters for a
Stair Railing. Installation Guide
Stair Railing Installation Guide THE BEST CHOICE FOR STRONG & DURABLE RAILING SYSTEMS Our exclusive manufacturing process ensures our vinyl railing will provide superior strength plus it is virtually maintenance
Liste der verwendeten Prüfmittel List of used test equipment
rodukte roducts rüfbericht-nr.: 21204831_001 Seite 2 von 12 age 2 of 12 Liste der verwendeten rüfmittel List of used test equipment rüfmittel Test equipment rüfmittel-nr. / ID-Nr. Equipment No. / ID-No.
The Ideal Solution for Hospice Care
The Ideal Solution for Hospice Care Comfort and Pain Management Quality of Life Safety Durability www.brodaseating.com 1-800-668-0637 1 Why BRODA chairs are the ideal choice for hospice care: Comfort and
Fixed and Portable Ladders- A Guide to OSHA Rules
Fixed and Portable Ladders- A Guide to OSHA Rules Introduction Working on and around stairways and ladders is hazardous. Stairways and ladders are major sources of injuries and fatalities among construction
Commonwealth of Pennsylvania PA Test Method No. 632 Department of Transportation October 2013 5 Pages LABORATORY TESTING SECTION. Method of Test for
Commonwealth of Pennsylvania PA Test Method No. 632 Department of Transportation 5 Pages LABORATORY TESTING SECTION Method of Test for TIME OF SETTING OF CONCRETE MIXTURES BY PENETRATION RESISTANCE 1.
Dell P Series Monitor VESA Mounting Bracket Installation Instructions
Dell P Series Monitor VESA Mounting Bracket Installation Instructions The VESA mounting bracket enables a Wyse cloud client to be mounted to the Dell P Series Monitor and the Dell E24 Monitor. The cloud
301.7D. Mini Hydraulic Excavator
301.7D Mini Hydraulic Excavator Engine Weights Gross Power (ISO 14396) 17.9 kw 24.3 hp Operating Weight with Canopy 1610 kg 3,550 lb Net Power 13.2 kw 17.7 hp Operating Weight with Cab 1720 kg 3,792 lb
PC18MR-3 PC20MR-3 PC27MR-3 PC30MR-3 PC35MR-3 PC45MR-3 PC55MR-3
PCMR-3 PC45MR-3 PC55MR-3 MR-3 SERIES COMPACT H YDRAULIC E XCAVATOR WALK-AROUND Photo may include optional equipment Performance and Versatility Komatsu HydrauMind hydraulic system Automatic load sensing
Service Bulletin Trucks Date Group No. Page
Volvo Trucks North America, Inc. Greensboro, NC USA Replaces Service Bulletin 601 06 dated 03.98. Service Bulletin Trucks Date Group No. Page 9.2000 601 006 1(8) Wheel Alignment Steer and Drive Axles VN,
BLADE S-MAX Cabinet for Blade Server
Cabinet for Blade Server 1 2 Overview Material specification Corner verticals: 1.5 mm steel End frames: 1.5 mm steel Panel mounts: 2.0 mm steel Panel mount supports: 1.5 mm steel Side panels, door and
Three Methods for Calculating the Buoyant Force Gleue: Physics
Three Methods for Calculating the Buoyant Force Gleue: Physics Name Hr. The Buoyant Force (F b ) is the apparent loss of weight for an object submerged in a fluid. For example if you have an object immersed
AA Solar and Sun Power Plus
AA Solar and Sun Power Plus www.aasolar.co.nz www.sunpowerplus.co.nz -1- Contents Chapter Title Page 1 General information 3 2 Safety and Installer Responsibilities 4 3 Technical Specifications 5 4 Tools
Think of the environment before printing! Fax only contains page 1!
Netti 4U comfort compact easy to use design Date Invoice address Invoice address = delivery address Customer code C- Contact person Reference Other delivery address Offer Order Basic price: 2.750,- Excl.
2014 FURNITURE. www.samsonitefurniture.com (844) 218-7049
www.samsonitefurniture.com (844) 218-7049 Manufacturing specifications are subject to change without notice. Dimensions refer to packing capacity and are approximate. California Proposition 65 Warning:
The entire document shall be read and understood before proceeding with a test. ISTA 3B 2013 - Page 1 of 35
Packaged-Products for Less-Than-Truckload (LTL) Shipment ISTA 3 Series General Simulation Performance Test PROCEDURE VERSION DATE Last TECHNICAL Change: NOVEMBER 2012 Last EDITORIAL Change: JANUARY 2013
Master Anamorphic T1.9/35 mm
T1.9/35 mm backgrounds and a smooth, cinematic look, the 35 Close Focus (2) 0.75 m / 2 6 Magnification Ratio (3) H: 1:32.3, V: 1:16.1 Weight (kg) 2.6 Weight (lbs) 5.7 Entrance Pupil (7) (mm) -179 Entrance
INTERNATIONAL HOCKEY FEDERATION PERFORMANCE REQUIREMENTS AND TEST PROCEDURES FOR HOCKEY BALLS. Published: April 1999
INTERNATIONAL HOCKEY FEDERATION PERFORMANCE REQUIREMENTS AND TEST PROCEDURES FOR HOCKEY BALLS Published: April 1999 CONTENTS 1 Introduction 2 Test Procedures General 3 Standards and Specific Test Procedures
ANSI/SOHO S6.5-2008 (R2013) Small Office/Home Office Furniture - Tests American National Standard for Office Furnishings
Small Office/Home Office Furniture - Tests merican National Standard for Office Furnishings merican National Standard pproval of an merican National Standard requires verification by NSI that the requirements
ECONOMIC COMMISSION OF EUROPE (ECE) BRANDING
Much like the U.S. Department of Transportation, The Economic Commission of Europe, or ECE, regulates the manufacturing of vehicle components. To receive ECE branded approval, tires must meet set standards
ATHLETIC LOGO GRAPHIC STANDARDS GUIDE VOL.1
ATHLETIC LOGO GRAPHIC STANDARDS GUIDE VOL.1 OFFICIAL LOGO COLORS Primary Colors CU Athletic Maroon Pantone 209 CU Gray Pantone 430 Secondary Colors Black White 1 CONCORD UNIVERSITY MOUNTIAN LIONS LOGO
AP Physics - Chapter 8 Practice Test
AP Physics - Chapter 8 Practice Test Multiple Choice Identify the choice that best completes the statement or answers the question. 1. A single conservative force F x = (6.0x 12) N (x is in m) acts on
Loss Prevention Reference Note. Adjusting the Computer Workstation. Glare Viewing Distance. Line of Sight Neck Posture Arm Posture Back Posture
Loss Prevention Reference Note Adjusting the Computer Workstation Line of Sight Neck Posture Arm Posture Back Posture Adjustability Glare Viewing Distance Work Surfaces Mouse Position Leg Space Leg Support
Moving and Handling Techniques
Moving and Handling Techniques Introduction Manual handling involves any activity that requires the use of force exerted by a person to lift, lower, push, pull, carry or otherwise move or hold an object.
Safety Notice: Falls From Chairs
Click to edit Master text styles Second level Third level Fourth level Fifth level Safety Notice: Falls From Chairs Department of Occupational Health and Safety yorku.ca/dohs A text only version of this
PHY121 #8 Midterm I 3.06.2013
PHY11 #8 Midterm I 3.06.013 AP Physics- Newton s Laws AP Exam Multiple Choice Questions #1 #4 1. When the frictionless system shown above is accelerated by an applied force of magnitude F, the tension
MONITOR MOUNTS. Monitor Arms OVERVIEW. Space saving benefits. Collaboration benefits. Performance benefits
Monitor Arms OVERVIEW MONITOR MOUNTS Monitor arms can be used with either fixed height or adjustable height workcenters and are an excellent way to achieve the optimal level of adjustability recommended
THROWER S TEN EXERCISE PROGRAM
THROWER S TEN EXERCISE PROGRAM Diagonal Pattern D2 Extension Involved hand will grip tubing handle overhead and out to the side. Pull tubing down and across your body to the opposite side of leg. During
288 Range 24-28 tm. Technical data. www.hiab.com. Min. 4685 Max. 20970
HIAB 288 Range 24-28 tm Min. 4685 Max. 20970 2842 Technical data www.hiab.com HIAB XS 288 Contents Introduction...3 Safety Regulations...4 Disclaimer...4 Explanation of Symbols...4 Explanation of Diagrams...4
DOREL ASIA 3-PC COUNTER HEIGHT BAR SET. Model No: DA3729 UPC CODE: 0-65857-16286-8 NOTE: / /
DOREL ASIA PC COUTER HEIGHT BAR SET Model o: DA9 UPC CODE: 058588 OTE: THIS ISTRUCTIO BOOKLET COTAIS IMPORTAT SAFETY IFORMATIO. PLEASE READ AD KEEP FOR FUTURE REFERECE. Lot number: (TAKE FROM CARTO) Date
3D Drawing. Single Point Perspective with Diminishing Spaces
3D Drawing Single Point Perspective with Diminishing Spaces The following document helps describe the basic process for generating a 3D representation of a simple 2D plan. For this exercise we will be
Cavity Drain R20 is manufactured from1.0mm thick black high density polyethylene with studs approximately 20mm high.
CI/SfB Tn6 L6813 September 2013 RIW CAVITY DRAIN R20 R20 is manufactured from1.0mm thick black high density polyethylene with studs approximately 20mm high. Other systems are available for specific uses,
Introduction to Autodesk Inventor for F1 in Schools
Introduction to Autodesk Inventor for F1 in Schools F1 in Schools Race Car In this course you will be introduced to Autodesk Inventor, which is the centerpiece of Autodesk s digital prototyping strategy
Cardok Sàrl CP37 CH-1295 Tannay Switzerland Phone: 0041 22 77 66 051 info@cardok.com
CARDOK CARLIFT Fast access to underground garages Fast, Silent, Discreet, Design, High-Tech Installation to replace an access ramp on private property Dimensions: (Built to measure, all dimensions can
B) 286 m C) 325 m D) 367 m Answer: B
Practice Midterm 1 1) When a parachutist jumps from an airplane, he eventually reaches a constant speed, called the terminal velocity. This means that A) the acceleration is equal to g. B) the force of
MANUAL HANDLING IN OFFICES
Manual Handling General risk assessments of work/teaching activities are required to be completed under the Management of Health and Safety at Work Regulations. Where appropriate, manual handling should
Economic and Social Council
UNITED NATIONS E Economic and Social Council Distr. GENERAL TRANS/WP.1/2003/1/Rev.4 23 April 2004 ENGLISH Original: ENGLISH, FRENCH and RUSSIAN ECONOMIC COMMISSION FOR EUROPE INLAND TRANSPORT COMMITTEE
WERKZEUGMASCHINEN BENDING TOOLS
WRKZUGMASCHINN BNDING TOOLS Press Brakes HT Werkzeugmaschinen GmbH mmendinger Str. 21 D-79331 Teningen Germany Tel. + 49 (0) 76 41 46 09-0 Fax + 49 (0) 76 41 46 09-290 email: info@eht.de Internet: www.eht.de
T12 COMPACT BATTERY-POWERED RIDER SCRUBBER. Experience the power of a heavy-duty rider scrubber and the maneuverability of a compact footprint
CREATING A CLEANER, SAFER, HEALTHIER WORLD. EQUIPMENT T12 COMPACT BATTERY-POWERED RIDER SCRUBBER POWER Experience the power of a heavy-duty rider scrubber and the maneuverability of a compact footprint
Old people and nursing homes. Old people and nursing homes, rehab/medical. SPECIAL SOLUTIONS. Security and comfort for every stage of life.
. SPECIAL SOLUTIONS. Security and comfort for every stage of life. 401 Paracelsus wash basin to DIN 1386, DIN-EN 32 without overflow, pre-punched tap-hole Model no.: 251060 Dimensions: 640 x 490 mm Weight:
AP Physics: Rotational Dynamics 2
Name: Assignment Due Date: March 30, 2012 AP Physics: Rotational Dynamics 2 Problem A solid cylinder with mass M, radius R, and rotational inertia 1 2 MR2 rolls without slipping down the inclined plane
10 ModLite Minimal (Option 4) Trade Show Display Booth
This Display provides a modern, slick, and stylish appearance. The extrusion based exhibit features a NEW velcro-applied fabric graphic. Headers and wings are available in UV printed graphics or frosted
AMPSEAL* Automotive Plug Connector and Header Assembly
AMPSEAL* Automotive Plug Connector and Header Assembly Application Specification 24 SEP 97 Rev E All dimensions are given in millimeters unless otherwise specified. All dimensional tolerances are +0.2
PROPOSAL TO REVISE CODE 6 Software for checking non-continuous rolling
OECD Standard Codes for the Official ing of Agricultural and Forestry Tractors PROPOSAL TO REVISE CODE 6 Software for checking non-continuous rolling DISCLAIMER This document is distributed to the National
Primeview Indoor LED Display
Primeview Indoor LED Display Unique by Design Large Venue Retail Broadcast Financial Primeview Indoor LED Display Unique by Design Primeview s Indoor LED Video Wall solutions are the most ideal system
KWIK SEW 'S SEWING ROOM SERIES
KWIK SEW 'S SEWING ROOM SERIES MEASURING & BASIC ALTERATIONS Use the expertise behind KWIK SEW patterns to help achieve a perfect fit! Measuring the body and choosing the correct size pattern. A PERFECT
16/32 Channel 1U Rack Mount CCTV Power Supply
16/32 Channel 1U Rack Mount CCTV Power Supply Manual PH-A3224-GUQ Shown 16-Channel 32-Channel PTC PH-A1612-PUQ PH-A3224-PUQ Glass Fuse PH-A1612-GUQ PH-A3224-GUQ Industrial design 12 Amp 3 Amps per channel
Practice Test SHM with Answers
Practice Test SHM with Answers MPC 1) If we double the frequency of a system undergoing simple harmonic motion, which of the following statements about that system are true? (There could be more than one
Drew University Ladder Safety Program Policy and Inspection Procedure Draft 0412
PURPOSE To establish and define the procedures to ensure that ladders at Drew University are installed, used, inspected and maintained in accordance with applicable standards. REFERENCES OSHA Portable
Maximum Length = 4 lines of text, (10 or 8 Points or 6 or 7 LPB). Width of block no larger than 1.75 inches. Page 1 of 9
Supplier Compliance Container (B-10) Label (4 x 6 ) Specification Sheet For additional detail, refer to AIAG B-10 Guidelines June 2004. For Code 128, refer to Page 3 of this document. Part Number Block
EDEXCEL NATIONAL CERTIFICATE/DIPLOMA MECHANICAL PRINCIPLES AND APPLICATIONS NQF LEVEL 3 OUTCOME 1 - LOADING SYSTEMS
EDEXCEL NATIONAL CERTIFICATE/DIPLOMA MECHANICAL PRINCIPLES AND APPLICATIONS NQF LEVEL 3 OUTCOME 1 - LOADING SYSTEMS TUTORIAL 1 NON-CONCURRENT COPLANAR FORCE SYSTEMS 1. Be able to determine the effects
22 (21.5 viewable), 16:9 FHD LED multimedia monitor with SuperClear VA technology. VA2265Sm-3
22 (21.5 viewable), 16:9 FHD LED multimedia monitor with SuperClear VA technology VA2265Sm-3 The ViewSonic VA2265Sm-3 is a 22 (21.5 viewable) widescreen monitor with an LED backlight and glossy, thin-bezel
HRA SULKY APPROVAL POLICY
HRA SULKY APPROVAL POLICY COMMENCEMENT DATE This policy comes into effect on 18 October 2010. PURPOSE The maintenance and improvement of the safety standards during harness racing has required Harness
Basics to Using the View Camera
Walker Evans at work Using the View Camera Basics to Using the View Camera Because of the large-scale nature of the view camera, it is necessary to follow basic steps in setting-up the camera in order
Banner Clip Installation
Banner Clip Installation For fabric graphics or solid fabric panel installation onto EZ6 or EZ12 truss. Graphics may be on either side of a banner. The top seam will determine which side faces you. Rigid
22 (21.5 viewable), 16:9 FHD LED monitor with SuperClear VA technology and HDMI input. VA2265Sh
22 (21.5 viewable), 16:9 FHD LED monitor with SuperClear VA technology and HDMI input VA2265Sh The ViewSonic VA2265Sh is a 22 (21.5 viewable) widescreen monitor with an LED backlight and glossy, thinbezel
TASTECH SERVICES LTD. Manufacturer and Supplier of Equipment and Daily Living Aides to Hospitals, Resthomes, OT s and the General Public
TASTECH SERVICES LTD Manufacturer and Supplier of Equipment and Daily Living Aides to Hospitals, Resthomes, OT s and the General Public Issue One Phone (03) 343 2122 e.mail: info@tastechservices.co.nz
Knürr Miracel. Knürr Miracel. 19 Network and Server Rack Platform 1.12 to 1.22 1.11
Knürr Miracel 19 Network and Server Rack Platform 1.12 to 1.22 1.11 19" Server Rack: Knürr Miracel Strong points 1.13 Knürr Miracel ASP ASP/Server Rack 1.16 Knürr Miracel Server Rack 1.18 Knürr Miracel
This clause gives guidance on best practice in the layout of preprinted technical drawings, including those produced by computers.
Layout of drawings. General This clause gives guidance on best practice in the layout of preprinted technical drawings, including those produced by computers..2 Drawing sheets The A series of drawing sheets,
silvestri Bicam II Professional modular camera for high-end digital photography Giovanni Bortolani Technical information dimensions weight vertical shift lenses attachment back attachment reference code
CLOUD HANDS Yun Shou
CLOUD HANDS Yun Shou - Start in the Ping Xing Bu stance - Arms hanging naturally to the sides fingers pointing straight forward (i.e. palms are parallel to the floor) - From the starting position, raise
Universal Gauge Measuring System USERS MANUAL
Universal Gauge Measuring System 2002 Chief Automotive Technologies, Inc. Chief s Limited One-Year Warranty & Liability CHIEF'S LIMITED ONE-YEAR WARRANTY & LIABILITY Chief Automotive Technologies, Inc.
White Paper. Ergotron Desk Stands DESIGN OF AN ERGONOMICALLY CORRECT DESK STAND FOR FLAT PANEL MONITORS
White Paper Ergotron Desk Stands DESIGN OF AN ERGONOMICALLY CORRECT DESK STAND FOR FLAT PANEL MONITORS DESIGN OF AN ERGONOMICALLY CORRECT DESK STAND FOR FLAT PANEL MONITORS Presented by Ergotron, Inc.
SolidWorks Tutorial 4 CANDLESTICK
SolidWorks Tutorial 4 CANDLESTICK Candlestick In this tutorial you will make a simple container and a candlestick out of sheetmetal. You will learn about working with sheet metal in SolidWorks. We will
DMS 680. Universal length measuring system gauge inspection for»iso 9000«requirements
DMS 680 Universal length measuring system gauge inspection for»iso 9000«requirements Universal length measuring system DMS 680 Wide range of applications For periodic inspection of gauges, reference gauges,
This document fully describes the 30 Day Flexibility Challenge and allows you to keep a record of your improvements in flexibility.
Welcome to the StretchTowel 30 Day Flexibility Challenge! You can Be More Flexible in 30 days by following our stretching program for 10 minutes a day. The best part is that you can stretch using the StretchTowel
Fall Protection. Solutions for Safety at Heights. Risk Assessment. Hierarchy of fall protection options. Supplementary Administration Controls
Solutions for Safety at Heights Risk Assessment Consult AS/NZS 1891.4 HIERARCHY OF CONTROLS, these are; IDENTIFY all potential fall hazards. ELIMINATE the need to access the potential hazard area. SUBSTITUTION
MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES
Electric Counterbalance Trucks MOVING YOU FURTHER HYUNDAI HEAVY INDUSTRIES Your satisfaction is our priority! Hyundai introduces a new line of 9-series battery forklift trucks. The newly designed 4 wheel
Lab 1: The metric system measurement of length and weight
Lab 1: The metric system measurement of length and weight Introduction The scientific community and the majority of nations throughout the world use the metric system to record quantities such as length,
INSTALLATION INSTRUCTIONS
INSTALLATION INSTRUCTIONS PARTS REQUIRED Single QuickStand Parts A (1) QuickStand Unit B (1) Base Plate C (1) Platform D (1) Palm Support E (1) VESA Plate F (6) M8 x 18 mm Flat Head Machine Screws G (4)
VESA FLAT DISPLAY MOUNTING INTERFACE STANDARD (for Flat Panel Monitors/Displays/Flat TVs)
FDMI Standard VESA Video Electronics Standards Association 860 Hillview Court, Suite 150 Milpitas, California 95035 Phone: (408) 957-9270 Fax: (408) 957-9277 VESA FLAT DISPLAY MOUNTING INTERFACE STANDARD
Atigra T2 Seat System Notes for the Therapist
The Atigra comes with the T2 seat system. The T2 seat system has many advantages for the therapist who is looking for a seat and backrest system that will provide good postural support and a high level
OPERATING P L AYA B I L I T Y P R E C I S I O N D E S I G N
P L AYA B I L I T Y P R E C I S I O N P E R F O R M A N C E OPERATING INSTRUCTIONS FOR: GolfWorks Loft and Lie Gauges code: HGCG/DGCG/LOLI2 4820 Jacksontown Road P.O. Box 3008 Newark, Ohio 43058-3008 Toll-Free:
A guide for employees
A guide for employees This booklet has been developed as a guide to assist in the prevention of muscular discomfort and strain that can sometimes be associated with computer use. The information provided
Speed A B C. Time. Chapter 3: Falling Objects and Projectile Motion
Chapter 3: Falling Objects and Projectile Motion 1. Neglecting friction, if a Cadillac and Volkswagen start rolling down a hill together, the heavier Cadillac will get to the bottom A. before the Volkswagen.
Installation Instructions:
Portable Guardrail System Model Numbers: 7900060, 7900061, 7900062, 7900063 Installation Instructions: Portable Guardrail System This instruction is intended to meet the Manufacturer s Instructions requirement
SETTING UP YOUR 6000 SERIES TIME RECORDER
INTRODUCTION The Pyramid 6000 Series Time Recorder is an electronic time recorder designed to make payroll processing easier and more efficient. The 6000 series will meet your business needs whether your
TRAINING AND EQUIPMENT MANUAL 304 LADDER PRACTICES 304.006 EXTENSION LADDERS EFFECTIVE: OCTOBER 2007
TRAINING AND EQUIPMENT MANUAL 304 LADDER PRACTICES 304.006 EXTENSION LADDERS EFFECTIVE: OCTOBER 2007 The Department utilizes 10-foot, 14-foot, 24-foot, and 35-foot extension ladders. Extension ladders
Prüfbericht - Nr.: Test Report No.: 174012161/GZF/01-01
QMA TRLP 6.1-350 Version: 1 01.08.2011 Produkte Products Prüfbericht - Nr.: Test Report No.: 174012161/GZF/01-01 Seite 1 von 6 Page 1 of 6 Auftraggeber: Client: Gegenstand der Prüfung: Test item: SWAN
Enjoy a professional massage in the comfort of your own home. Introducing the Real Pro ULTRA Prestige. 3D Massage Elements
Introducing the Real Pro ULTRA Prestige The EPMA73K massage chair is our most intuitive, personal luxury massage experience. It is designed to help you achieve therapeutic muscle relaxation and increased
Throwers Ten Exercise Program
Throwers Ten Exercise Program The Thrower s Ten Program is designed to exercise the major muscles necessary for throwing. The Program s goal is to be an organized and concise exercise program. In addition,
LABORATORY MEASUREMENTS ON THE EFFICIENCY OF SOUND REDUCING FURNITURE PADS OF TYPE SILENT SOCKS
Report 08-113-R1 06/11/2008 4 pages, 1 appendix Akustikverkstan AB, St Bryne, 531 94 Järpås, tel +46 (0)6-59 37 99 pontus.thorsson@akustikverkstan.se LABORATORY MEASUREMENTS ON THE EFFICIENCY OF SOUND
www.camelotfurniture.co.uk MADE IN BRITAIN NHS & HEALTHCARE COLLECTION
www.camelotfurniture.co.uk MADE IN BRITAIN NHS & HEALTHCARE COLLECTION The Merlin chair is suitable for any of the following NHS departments as a treatment/recovery chair: UNIVERSITY HOSPITALS BIRMINGHAM
Chapter 3.8 & 6 Solutions
Chapter 3.8 & 6 Solutions P3.37. Prepare: We are asked to find period, speed and acceleration. Period and frequency are inverses according to Equation 3.26. To find speed we need to know the distance traveled
Wind Sensor W-RS485 with RS485 Interface
Wind Sensor W-RS485 with RS485 Interface Technical data and notes for installation Elsner Elektronik GmbH Steuerungs- und Automatisierungstechnik Herdweg 7 D-75391 Gechingen Germany Phone: +49 (0) 70 56/93
Customer: Cardiff Hospital NHS (United Kingdom) Machine:
Customer: Cardiff Hospital NHS (United Kingdom) Machine: Bench for leak test Model: Easy TS Page 1 of 7 Date: 6 th March 2012 1. Introduction. Easy TS is a compact and reliable table top bench designed
Supplemental Questions
Supplemental Questions The fastest of all fishes is the sailfish. If a sailfish accelerates at a rate of 14 (km/hr)/sec [fwd] for 4.7 s from its initial velocity of 42 km/h [fwd], what is its final velocity?
SSG PRODUCTS FOR SHIPS AND OFFSHORE
6.1 SSG PRODUCTS FOR SHIPS AND OFFSHORE SSG workshop cabinets, tables and shelving system specially adapted to be used on-board ships and offshore. Developed in close cooperation with users from these
Test Report: ICL/H11/979. BS 7837: 1996 Flammability performance for textiles used in the construction of marquees and similar textile structures.
Interscience Fire Laboratory Building 63 Haslar Marine Technology Park Haslar Road, Gosport Hampshire PO12 2AG United Kingdom Tel. : +44 (0) 20 8692 5050 Fax.: +44 (0) 20 8692 5155 Email: firetesting@intersciencecomms.co.uk
Aerona Air Source Heat Pumps
ADDENDUM to INSTALLATION INSTRUCTIONS for Aerona Air Source Heat Pumps DOC.87-05/05 Rev.04 March 2013 ATTENTION INSTALLERS - UPDATED INFORMATION! Your Grant Aerona Air Source Heat Pump has a number of