ATMCC Truck M tldowa Community Calt.g TMCC PROGRAM UNIT REVIEW -ANNUAL PROGRESS REPORT
|
|
- Noreen McDonald
- 8 years ago
- Views:
Transcription
1 Truck M tldowa Community Calt.g Program/Unit Reviewed: Manufacturing Technologies Self-Study Chair: Kelly Oswald Division: AIT Dean: Jim New Vear of Last PUR: Date of next PUR: Program/Unit Mission Statement: To deliver thorough, industry-relevant curriculum and effective, student-centered instruction capable of providing students with the intellectual tools and physical skillsets required to pursue successful employment, career advancement, and personal growth within manufacturing industries. The Description of the Degree(s)/Emphosis(s)/Certificote(s) for your PUR area ore listed below. Please review for accuracy. Description of Degree/Emphasis/Certificates: Manufacturing Technologies Certificate of Achievement- Computer Numeric Controlled (CNC) Machining: The CNC Machining Certificate of Achievement provides students with the skills and knowledge required for an entry level position as a computer numerical control (CNC) machine tool operator. This certificate stresses the skill sets required to set up, program, and operate CNC mills and lathes in order to produce high quality, precision machined components required by today's competitive and diverse manufacturing industries along with the general education skills that are strongly requested by commercial and industrial employers. Manufacturing Technologies Degree - Drafting Emphasis: Drafting is a critical skill for a diversity of industries, including manufacturing, engineering, construction and architecture. Students in the TMCC drafting program develop both manual and computerized drafting skills, including standard twodimensional drawings and three dimensional solid modeling. With an AAS degree, drafters are prepared to work with designers and engineers to develop graphic instructions used to complete a variety of projects. Manufacturing Technologies Certificate of Achievement - Drafting Technology: The drafting technology certificate is designed to provide training and technical job skills to students seeking employment and/or skill upgrades. A drafting technician works with designers and engineers within a variety of industries including manufacturing, architecture, construction and landscaping. The program is competency-based. Students complete a variety of hands-on learning exercises ranging from manually drafted drawings to advanced computerized two and three dimensional wireframe and solid modeling projects. Manufacturing Technologies Degree - Food Processing Technology Emphasis: The Food Processing Technology emphasis prepares students for entry level employment in the food manufacturing industry. It provides an understanding of the selection, preparation, processing, packaging and distribution of safe, nutritious, and wholesome foods. Manufacturing Technologies Degree - Machining Emphasis: The manufacturing technologies, machining emphasis AAS degree program is a two-year degree program designed to provide training and technical job skills to students seeking employment and/or skill upgrades within the manufacturing
2 ll"uckee Meadow community College and machine trades. The program is competency-based, requiring students to complete a variety of hands-on learning exercises ranging from manually machined projects to advanced multi-axis CNC tasks. This program is offered in a flexible open-entry/open-exit format to respond to the needs of industry and the working professional. Manufacturing Technologies Degree - Production Systems Emphasis: The manufacturing technologies production systems emphasis MS degree program is a two-year program designed to provide training and technical job skills to students seeking employment and/or skill upgrades as an industrial production, assembly, or fabrication manager or technician. The program utilizes an advanced automated production lab in which students demonstrate and manipulate production systems controls and techniques at both the technician and managerial levels. This program is offered in a flexible openentry/open-exit format to respond to the needs of industry and the working professional. Manufacturing Technologies Certificate of Achievement - Production Technician: The program prepares individuals in the core competencies of front-line production employment for the manufacturing industry. It complies with nationally recognized industry standards and emphasizes basic skills in workplace safety, quality practices and measurement, manufacturing processes and production, and maintenance awareness. Manufacturing Technologies Degree-Welding Emphasis: The associate of applied science manufacturing technologies degree with a welding emphasis gives the student the training necessary to earn the American Welding Society structural steel certifications, which are required for employment in most areas of the construction and manufacturing fields involving welding, along with the general education requirements and employability skills that are sought after by all employers in the construction and manufacturing trades. Manufacturing Technologies Certificate of Achievement- Welding Technology: Based on the American Welding Society Entry Level Welder Standards, the welding technology certificate of achievement program gives students the welding skills necessary to qualify for an entry-level position in a diversity of occupations that utilize welding from construction to manufacturing along with part of the general education skills that are strongly requested by commercial and industrial employers. SECTION I The Outcomes and Measures listed below were retrieved from Degree/Emphasis or Certificate submissions provided by your area to CAP and approved. Please review the outcomes to ensure accuracy. This w/11 be the first year that we officially collect data through the PUR process concerning these degree level learning outcomes. If your area is scheduled for a PUR in the near future, please plan on reporting assessment efforts around these learning outcomes when you participate in your PUR. (NO ACTION REQUIRED - PLEASE REVIEW) Manufacturing Technologies Certificate of Achievement - Computer Numeric Controlled (CNC) Machining Goals/Outcomes: Read and interpret technical prints for the production and inspection of manufactured work pieces. Produce precision machined work pieces within print specifications on computer numerical controlled (CNC} machine tools.
3 Truck M dow Community Call & Manufacturing Technologies AAS Degree - Drafting Degree Goals/Outcomes: Understand drafting conventions including symbols, linetypes, lineweights, and dimension styles as applicable to mechanical drawings. Create complex drawings including orthographic projections, pictorials, working drawings, and development drawings; and prepare drawing details including auxiliary views, sections, tolerances, and surface finishes, all within specifications. Create complex 3D models to specifications using advanced commands. Manufacturing Technologies Certificate of Achievement- Drafting Technology Goals/Outcomes: Demonstrate a basic knowledge of drafting theory as it relates to working with designers and engineers within a variety of industries including manufacturing, architecture and construction. Prepare technical drawings and presentations demonstrating understanding of manual drawing and CAD techniques. Manufacturing Technologies AAS Degree- Food Processing Technology Emphasis Degree Goals/Outcomes: Practice occupational safety at all levels in a modern food processing plant. Have the ability to work in commercial food processing plants. Apply sanitation standards in a bulk food preparation environment. Manufacturing Technologies AAS Degree - Machining Manufacturing Technologies AAS Degree - Production Systems Emphasis Degree Goals/outcomes: Demonstrate an ability to read and interpret technical prints for the production and inspection of manufactured work pieces. Demonstrate an ability to manage complex production systems, equipment, and controls. Demonstrate an ability to apply quality and statistical process control techniques to complex manufacturing and production systems. Manufacturing Technologies Certificate of Achievement - Production Technician Goals/Outcomes: Practice safety at all levels in a modern manufacturing and distribution plant. Diagnose and repair electrical and mechanical components commonly used in a production operation.
4 Truck- M dowa community Coll V- Use quality control standards to troubleshoot inefficiencies in a production system. Manufacturing Technologies AAS Degree - Welding Emphasis Degree Goals/Outcomes: Be proficient in four major welding processes and prepared for industry-standard certification. Understand the basic concepts of technical drawings and apply print reading techniques required in the welding industry. Understand and consistently demonstrate safe and proper use of welding equipment, power tools, and accessories In the performance of welding and joinery. Manufacturing Technologies Certificate of Achievement - Welding Technology Goals/Outcomes: Be proficient in two major welding processes and prepared for industry-standard certification. Understand the basic concepts of technical drawings and apply print reading techniques required in the welding industry. Understand and consistently demonstrate safe and proper use of welding equipment, power tools, and accessories In the performance of welding and joinery.
5 Truak M dawa Community Coll O SECTION II The following Strategies were identified in your most recent Program/Unit Review. Please respond to the strategies by including the status, actions taken to respond to the strategy, projected timefine, and if resource issues are anticipated to fulfill the strategy. Unit Strategies Status- Action Timeline Anticipated i.e. Recap of accomplishments Resource ongoing, Work to do Issues complete Develop specific Ongoing To help increase the female None strategies to increase enrolments in the Manufacturing student diversity Technologies, TMCC held a woman's (females and Hispanic technology Expo at the Edison Campus. Efforts to increase both students) and female and Hispanic enrollments and graduation rates; these graduation rates are also being need to be framed in developed through the future Ace the context of a college- High School and Round One and wide diversity effort. Round Three of the TAACCCT Grant. The Welding program has also hired a full time bilingual employee (English and Spanish) and the Machining program had hired a part-time bilingual (English and Spanish) Instructional Assistant. Continue to assess Ongoing The Manufacturing Technologies None courses as part of the programs are in the process of proposed five-year embedding mathematics and human schedule, including the relations into the curriculum. During the process all courses were development of evaluated for meaningful and meaningful and measurable learning outcomes in measurable learning compliance with TMCC best practice outcomes for those strategies. Randy Walden, Trenton courses not yet Schoppe and Laure'I Santos have assessed. More committed extensive efforts to assessment of courses revamp the learning outcomes and in the different program measures for courses within the areas is needed. Machining, Production Technician Curriculum and Welding sequence. These three new hires provide a consisted development or approach which is believed will aid in assessment strategies the development of consistent should be equally application of assessment across the applied throughout all different disciplines.
6 Tl'uckH M.-cfow. community College the areas of Manufacturing Technology. Address other areas of Ongoing The Machining Program has met with Waiting for the program not unique Industry trends by purchasing final discussed within the new CNC lathes and milling approval curriculum section: machines; purchasing new inspection from the equipment such as an optical Dept. of fabrication, machining, comparator and a coordinate Labor to welding. This would measuring machine; and has pre- purchase include elaborating on approval for ordering 9 new manual new and the unique industry lathes and 6 new manual milling required trends for each of the machines. The Production equipment. unit's program areas Technician Program is in the process and addressing how of setting up an industrial robot, and each of these areas is has pre-approval for ordering a new responding to its conveyor system and several particular industry industrial electronic trainers. The trends. Welding Program has pre-approval for ordering upgrades and new equipment to enhance existing machines to create 18 dual feed GMAW welding machines. Address resources Ongoing The IBEST Model has been modified. None needed for the three Mathematics is embedded into the externally driven curriculum and English will be offered initiatives. as separate course (English 107) tailored and delivered in a cohort model. Pursuant to the Dream It Do It initiative the Machining program has initiated the NIMS Accreditation process. With regards to the Right Skill Now initiative, the first two of three sessions were completed in the Summers of 2012 and 2013 respectively. The final session is in place, scheduled for the Summer of Search out additional Ongoing The Machining, Production Acceptance resources to acquire Technician and Welding programs are and new equipment. currently seeking new funding participation through the Round One and Round In round Three of the TAACCCT Grant. four. Manufacturing unit is currently holding discussions regarding options for participation in the TAACCCT
7 A TMCC TrUck- M a d ow. Comnn'"lty Collage TMCC PROGRAM UNIT REVIEW - ANNUAL PROGRESS REPORT grant round four. Continue to press for Ongoing New doors and a new ventilation Dependent facilities upgrades, system were added to the welding on final especially those that lab. A new floor is being planned for approval. affect safety. the machine shop that would create a level surface and also create a brighter surface that would enhance the lighting in the shop. Anew Production Technician lab is also being built as part of the Edison build out. It is expected that the drafting program will relocated to the Edison facility following the proposed build out. Work with Advisory Ongoing The manufacturing unit programs all None Board to develop continue to work with advisory strategies to expand boards to create internships, student students' use of new placement opportunities and to also advise the programs on new and equipment. emerging equipment. Approvals (Signatures and dates are required) 4/8/2014 Dean:._"""4--~.--~;._= Date:_...1'71 _,_l_<i'. +~-l..,._ o/' VPAA:~--~~~_,l,)..~~~~1Date :,~J- ~~- _,_ ;s~-=-"'-' q-1, _ - -
The Description of the Degree(s)/Emphasis(s)/Certificate(s) for your PUR area are listed below. Please review for accuracy.
Truell- M dowa Community CoUage Program/Unit Reviewed: Early Childhood Education Self-Study Chair: Crystal Swank Division: Liberal Arts Year of Last PUR: 2005 Dean: Armida Fruzzetti Date of next PUR: 2014-15
More informationDesign. Design. Certificates. Contact Information. Full-Time Faculty. Associate Degrees. Associate in Arts Degrees. Certificate of Achievement
Design Associate in Arts Degrees Architectural Design Computer-Aided Drafting Computer-Aided Drafting and Design Mechanical Design Students may earn one of the above-named associate degrees by completing
More informationManufacturing Technology Associate in Applied Science Field of Study Code: MANUF.AAS
Manufacturing Technology Associate in Applied Science Field of Study Code: MANUF.AAS Catalog Description: The Manufacturing Technology program provides training in a wide variety of skill areas of product
More informationNortheast Alabama Community College Drafting and Design Technology AAS, Certificate, and Short Term Certificate Program Review March 2010
Northeast Alabama Community College Drafting and Design Technology AAS, Certificate, and Short Term Certificate Program Review March 2010 Program Purpose The Drafting and Design Technology (DDT) program
More informationDrafting/CAD. 236 Drafting/CAD. Degree and Certificate Awarded
236 Drafting/CAD Drafting/CAD Degree and Certificate Awarded Associate in Science Degree, Drafting/CAD Certificate of Achievement, Drafting/CAD Program Description The 21st century is witnessing a rapid
More informationEngineering, Construction and Industrial Degrees and Certificates
Engineering, Construction and Industrial Degrees and Certificates All information subject to change. For the latest course information, access MY LFCC online at http://www.lfcc.edu. Information contained
More informationCabrillo College Catalog 2015-2016
ENGINEERING TECHNOLOGY Natural and Applied Sciences Division Wanda Garner, Division Dean Division Office, Room 701 Gary Marcoccia, Department Chair, (831) 479-5705 Aptos Counselor: (831) 479-6274 for appointment
More informationPrecision Manufacturing Program
Precision Manufacturing Program Conventional Precision Manufacturing (CPM) Certificate Program During this program, students learn about subjects that form a solid foundation for a career in manufacturing.
More informationENGINEERING AND TECHNOLOGY DEPARTMENT
ENGINEERING AND TECHNOLOGY DEPARTMENT Engineering and Technology Education focuses on technological knowledge and competence. It is designed to help students understand and to participate in the technological
More informationDRAFTING AND DESIGN. For additional program information see: http://www.hillcollege.edu/students/teched/drafting/.
DRAFTING AND DESIGN For additional program information see: http://www.hillcollege.edu/students/teched/drafting/. Certificate of Completion in Basic Computer Aided Drafting Major Code: 6055 TSI (Testing)
More informationbrightfutures Engineering technicians are in demand, find out about these career opportunities.
brightfutures engineering technologies at delaware Technical community college Engineering technicians are in demand, find out about these career opportunities. Contents Mechanical Engineering Technology
More informationINDUSTRIAL TECHNOLOGY EDUCATION
INDUSTRIAL TECHNOLOGY EDUCATION All students can benefit from study in an area of Industrial Technology. Classes can bring satisfying and worthy utilization of leisure and hobby time. Beyond this, many
More information2013-2014 Career and Technical Education Gold Seal
2013-2014 Career and Technical Education Gold Seal FLORIDA GOLD SEAL VOCATIONAL SCHOLARS AWARD http://www.floridastudentfinancialaid.org/ssfad/bf/gsvrequire.htm The Florida Gold Seal Vocational Scholars
More informationGRCC Manufacturing Technology
Grand Rapids Community College GRCC Manufacturing Technology Plastics Manufacturing Quality Science Tooling and Manufacturing Welding 1 www.grcc.edu G r a n d R a p i d s C o m m u n i t y C o l l e g
More informationComputer Integrated Manufacturing CIM A T I L I M U N I V E R S I T Y
MFGE 404 Computer Integrated Manufacturing CIM A T I L I M U N I V E R S I T Y Manufacturing Engineering Department Lecture 1 - Introduction Dr. Saleh AMAITIK Fall 2005/2006 Production Systems Production
More informationTECHNOLOGY EDUCATION DEPARTMENT
The Technology Education Department offers an elective course of study to all students at Hinsdale Central. Technology Education courses help students meet the elective arts requirement. Our program of
More informationCHAPTER 1. Introduction to CAD/CAM/CAE Systems
CHAPTER 1 1.1 OVERVIEW Introduction to CAD/CAM/CAE Systems Today s industries cannot survive worldwide competition unless they introduce new products with better quality (quality, Q), at lower cost (cost,
More informationOwensboro Community and Technical College
Owensboro Community and Technical College Grade: See chart below. Level: All courses are CP level. Course Descriptions: See pages 63-66 Location: DT=Downtown Campus, Main=OCC Campus, SE=Southeastern Campus
More informationINTERIOR DESIGN COURSE SYLLABUS 2012-2013
INTERIOR DESIGN COURSE SYLLABUS 2012-2013 COURSE DESCRIPTION: Students will be introduced to the field of interior design and the breadth of related careers associated with the industry. It is recommended
More informationWELDING TECHNOLOGY DEGREES AND CERTIFICATES. Welding Technology Degree. Shielded Metal Arc Plate and Pipe (270 hours) Certificate
Area: Technical Education Dean: Dr. Trish Caldwell Phone: (916) 484-8354 Counseling: (916) 484-8572 www.arc.losrios.edu/~welding/ The American Welding Society (AWS) nationally accredits American River
More informationPrecision Manufacturing Regional Alliance Project (PMRAP) Accelerated Weekend Program. Springfield Technical Community College.
Precision Manufacturing Regional Alliance Project (PMRAP) Accelerated Weekend Program At Springfield Technical Community College Summary Report Precision Manufacturing Regional Alliance Project (PMRAP)
More informationAssociate Degree in Manufacturing Engineering Technology
General Information An Associate Degree is awarded in both Manufacturing Engineering Technology and Manufacturing Design Technology Department. Both associate programs share the same first four quarters,
More informationDESIGN. College of the Arts. Career Possibilities. Undergraduate Programs. Bachelor of Arts in Design (120 Units) 342 Design 2015-2016 CSULB Catalog
DESIGN College of the Arts Department Chair: Martin Herman Department Office: Design (DESN), Room 101 Telephone / FAX: (562) 985 5089 / (562) 985 2284 Website: http://www.csulb.edu/depts/design/ Undergraduate
More informationWhat can I do with a major in Engineering Technology?
Lewis-Clark State College offers one and two year certificates, A.A.S. and B.A.S Degrees in Engineering Technology through the Technical and Industrial Division. You can learn more about the Technical
More informationKENNEBEC VALLEY COMMUNITY COLLEGE
KENNEBEC VALLEY COMMUNITY COLLEGE ENERGY SERVICES AND TECHNOLOGY PROGRAM ASSOCIATE OF APPLIED SCIENCE DEGREE TABLE OF CONTENTS Program Description... 2 Admission Requirements... 2 AAS Degree Curriculum...
More informationDrafting & Design Technology Program Review/Planning Process
Drafting & Design Technology Program Review/Planning Process Section I. The Program: Your Unit s Purpose and Goals 1. What is the Mission of your Program. It is the mission of the Drafting and Design Technology
More informationHeating, Refrigeration and Air Conditioning Technology Program Review/Planning Document May 6th, 2008. Section 1.
Heating, Refrigeration and Air Conditioning Technology Program Review/Planning Document May 6th, 2008 Section 1. Mission and Goals The Mission of OTC Ozarks Technical Community College's primary mission
More informationCRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS
CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS Effective for Evaluations During the 2011-2012 Accreditation Cycle Incorporates all changes approved by the ABET Board of Directors as of October
More informationCRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS
CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS Effective for Reviews During the 2015-2016 Accreditation Cycle Incorporates all changes approved by the ABET Board of Directors as of November 1,
More informationComputer Aided Drafting & Computer Graphic Design. Advisory Committee. Program Update TABLE OF CONTENTS
Computer Aided Drafting & Computer Graphic Design Advisory Committee Program Update TABLE OF CONTENTS Program Data 1. Enrollment 2. Graduates 3. Demographics 4. Program Costs Student Success Others 1.
More informationMaking Credentialing Work: An Education Perspective
Making Credentialing Work: An Education Perspective Vearl Turnpaugh Assistant Vice President Career and Technical Programs Ivy Tech Community College 14 Regions of Operation throughout the State 14 Regions
More informationELECTRONICS AND ELECTRO- MECHANICAL TECHNOLOGY
ELECTRONICS AND ELECTRO- MECHANICAL TECHNOLOGY ELECTRONICS TECHNOLOGY Step into the future at College of DuPage. Electronic components are nearly everywhere these days. From everyday consumer devices such
More informationCRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS
CRITERIA FOR ACCREDITING ENGINEERING TECHNOLOGY PROGRAMS Effective for Reviews During the 2013-2014 Accreditation Cycle Incorporates all changes approved by the ABET Board of Directors as of October 27,
More informationKennedy-King College 6301 South Halsted Chicago, Illinois 60621-3799 President: Ms. Arshele Stevens
Kennedy-King College 6301 South Halsted Chicago, Illinois 60621-3799 President: Ms. Arshele Stevens Proposed Program Title: Associate in Applied Science in Hospitality Management Projected Enrollments:
More informationIndustrial Education
Industrial Management, Safety Industrial Education Program Description This program is designed to train men and women for management positions in government and industry. The program was developed in
More informationAutomotive Manufacturing Technology
76 Location: Patterson Campus - Bldg. Q Program Information is a rapidly growing career in one of Alabama s highest-growth industries, automotive manufacturing. With high demand for skilled workers in
More informationCollege and Technical College
College and Technical College OWENSBORO COMMUNITY AND TECHNICAL COLLEGE DISCOVER COLLEGE Campus Based Technical Programs for High School Students 2013-2014 Discover College Campus-Based Technical Programs
More informationMANUFACTURING TECHNOLOGY
MANUFACTURING TECHNOLOGY MANUFACTURING TECHNOLOGY Step into the future at College of DuPage. Jobs in the manufacturing industry have changed considerably. Gone are the low-skilled, low-pay manufacturing
More informationBuilding Technology and Design Programs. Curriculum. Facilities. Outcomes
Building Technology and Design (AS) Building Technology offers an associate degree program in building technology and design that provides an introduction to architectural concepts and skills pertaining
More informationPreparing for Career Success in Architecture and Construction C A R E E R C L U S T E R S F O C U S I N G E D U C A T I O N O N T H E F U T U R E
Preparing for Career Success in Architecture and Construction CC9002 Career Clusters Prepare All Students for College, Technical Training, Apprenticeships and Careers Career Clusters prepare learners of
More informationENGINEERING AND TECHNOLOGY EDUCATION DEPARTMENT
ENGINEERING AND TECHNOLOGY EDUCATION DEPARTMENT Advanced Manufacturing I 5608 TEH600, TEH601 Grades 10-12 Dual credit through Ivy Tech Recommended Prerequisite: Introduction to Advanced Manufacturing and
More informationIndustrial Technology Degree Curriculum
Industrial Technology Programs Associate in Applied Science Degree Curricula: Automotive Systems Technology Industrial Systems Technology Diploma Curricula: Air Conditioning, Heating, and Refrigeration
More informationeducation on the future Preparing for Career Success in Architecture and Construction CC9002
Career Clusters Focusing education on the future Preparing for Career Success in Architecture and Construction CC9002 Career Clusters Focusing Career Clusters Prepare All Students for College, Technical
More informationHamilton Southeastern Schools Ivy Tech Community College Technical Education Partnership
Hamilton Southeastern Schools Ivy Tech Community College Technical Education Partnership Students enrolled in one of these programs will complete 5 college technical education courses, earning 15-16 college
More informationLAKELAND BUSINESS ENGINEERING TECHNOLOGIES. Opportunity. and. starts HERE COMMUNITY COLLEGE. www.lakelandcc.edu
LAKELAND COMMUNITY COLLEGE BUSINESS Accounting Business Management Information & Computer Science Media Paralegal Studies and ENGINEERING TECHNOLOGIES Civil Engineering Computer Integrated Manufacturing
More informationManufacturing Careers
Manufacturing Careers www.nwtc.edu AFFORDABLE EDUCATION FOR HIGH TECH CAREERS Programs Make things better. Today s advanced manufacturing industry needs highly skilled employees in every area from developing
More informationMerced College Heating Ventilation Air Conditioning and Refrigeration 2014-15 Program Review
Merced College Heating Ventilation Air Conditioning and Refrigeration 2014-15 Program Review Contents 1. Main... 2 2. Description of the Program... 2 3. Program History and Description... 2 4. Curriculum...
More informationItawamba Community College Program Review Career-Technical and Health Science Programs
Itawamba Community College Program Review Career-Technical and Health Science Programs I. Program Information 1. Name of Program Computer Networking Technology 2. Submission Date of Program Review 6/21/2012
More informationDrafting the Basics. Carol M. Lamb and David G. Kurtanich Youngstown State University
Drafting the Basics Carol M. Lamb and David G. Kurtanich Youngstown State University Abstract This paper outlines the work in progress undertaken by the School of Engineering Technology faculty to identify,
More informationEngineering Technology Disciplines
Engineering Technology Overview The Field - Engineering Technology Disciplines - Preparation - Accreditation - Day in the Life - Earnings - Employment - Career Path Forecast - Professional Organizations
More informationEngineering. at Cuyahoga Community College. www.tri-c.edu. Cuyahoga Community College
Engineering Contact Information: 216-987-4104 Website: www.tri-c.edu/engineering Booklet design by: Meredith Bard; Senior in Tri-C s Graphic Design Program Photos by: Rachael Rieke; Senior in Tri-C s Graphic
More informationGateway Community College Dual Enrollment College Now Partnership with WHHS
Gateway Community College Dual Enrollment College Now Partnership with WHHS Presenter: Eric Rice STEM-Technology Education, Family and Consumer Sciences and Nursing Department Chair MFG102-Manufacturing
More informationCertificate Programs CERTIFICATES. Business Administration (Certificate) Accounting Assistant (Certificate) Early Childhood Education (Certificate)
Certificate Programs Accounting Assistant The Accounting Assistant Certificate curriculum provides a beginning base of skills, information, and techniques for those students who have an interest in the
More informationCertificate Programs CERTIFICATES. Business Administration (Certificate) Accounting Assistant (Certificate) Early Childhood Education (Certificate)
Certificate Programs Accounting Assistant The Accounting Assistant Certificate curriculum provides a beginning base of skills, information, and techniques for those students who have an interest in the
More informationMedical Laboratory Technician AAS Program
Medical Laboratory Technician AAS Program New Program Proposal State Submission Steve Buchholz, Dean of Accreditation and Advancement July 2015 TABLE OF CONTENTS Executive Summary... 2 Identification and
More informationGILES COUNTY TECHNOLOGY CENTER STUDENT/PARENT PLANNING GUIDE 2016-2017
GILES COUNTY TECHNOLOGY CENTER STUDENT/PARENT PLANNING GUIDE 2016-2017 Giles County Technology Center The Career and Technical Education (CTE) programs at Giles County Technology Center offers students
More informationCareer Advisory Committee Handbook
Career Advisory Committee Handbook Importance of Advisory Committees Employers benefit by: Maintaining a direct connection to a trained workforce. Impacting the quality of CLC s career programs. Contributing
More informationInstructional Programs Eligible for College Occupational Grant Program Minnesota Two-Year State Colleges Active Programs in Fall Semester 2016 for
Instructional Programs Eligible for College Occupational Grant Program Minnesota Two-Year State Colleges Active Programs in Fall Semester 2016 for Hennepin Technical College This list was posted December
More informationWest Sound Technical Skills Center 101 National Avenue N. Bremerton WA 98312
West Sound Technical Skills Center 101 National Avenue N. Bremerton WA 98312 Instructor: Tony Sharpe Phone: 360-473-0585 Fax: 360-478-5090 Email: tony.sharpe@bremertonschools.org Hours: 7:30 a.m. 3:00
More informationInterior Design at PCC
New Student Information 2015 2016 Interior Design at PCC Portland Community College, Sylvania Campus, Science & Technology Building (ST), Room 200, tel: 971 722 4163 Program Advisor: Arlene McCashew: arlene.mccashew1@pcc.edu
More informationDIABLO VALLEY COLLEGE CATALOG 2014-2015
ENGINEERING ENGIN Tish Young, Dean Physical Sciences and Engineering Division Physical Sciences Building, Room 263 Possible career opportunities The engineering transfer program prepares students to enter
More informationCAREER AND TECHNICAL EDUCATION PROGRAM
The Career and Technical Education Program includes: Business, Drafting, Family Living, and Consumer Science. The courses in this program offer opportunities for career exploration, as well as college-bound
More informationUnderstand How and Where Computers are used in Manufacturing
H. RESOURCE MANAGEMENT AND MANUFACTURING COMPUTING H1 Understand How and Where Computers are used in Manufacturing H1.1 List possible computer applications in manufacturing processes. Performance Objective:
More informationMechanical Engineering Technology
Mechanical Engineering Technology Dr. Hazem Tawfik, Chair Mechanical Engineering Technology Dept. tawfikhh@farmingdale.edu 631-420-2046 School of Engineering Technology Associate in Applied Science Degree
More informationAlgonquin College REPORT TO NETAC ON HUMAN RESOURCE MATTERS (June 2012)
Algonquin College REPORT TO NETAC ON HUMAN RESOURCE MATTERS (June 2012) Contact Person: Claude Brulé Dean, Faculty of Technology and Trades Algonquin College 1385 Woodroffe Avenue Ottawa, Ontario K2G 1V8
More informationUniversity of Hawaii Maui College Program Learning Outcomes
University of Hawaii Maui College Program Learning Outcomes The following program learning outcomes have been approved by the various program advisory boards. Each program learning outcome is assessed
More informationBUILDING RENOVATION TECHNICIAN PROGRAM (T110)
BUILDING RENOVATION TECHNICIAN PROGRAM (T110) PROGRAM NAME COURSE CODE SCHOOL CENTRE LOCATION DURATION Building Renovation Technician T110 Construction Engineering Technology Casa Loma Campus 2 years (4
More informationOnline Computer Science Degree Programs. Bachelor s and Associate s Degree Programs for Computer Science
Online Computer Science Degree Programs EDIT Online computer science degree programs are typically offered as blended programs, due to the internship requirements for this field. Blended programs will
More informationAutomotive Technology
http://www.avc.edu (661) 722-6300 Automotive Technology 103 Definition Automotive Technology is designed to provide the future and working technician with a strong foundation in automotive repair, including
More informationCompendium to the National Technology Benchmarks - NTB 2010 TECHNICIAN
Compendium to the National Technology Benchmarks - NTB 2010 TECHNICIAN Reg d trademark of Canadian Council of Technicians and Technologists GENERAL PROGRAM CRITERIA FOR ALL DISCIPLINES Technician Level
More informationPrograms of Study. Architecture and Construction
AIR CONDITIONING & REFRIGERATION 117 Associate in Applied Science Degree (A.A.S.) 62 Credit Hours (CH) The A.A.S. in Air Conditioning and Refrigeration studies the design, selection, maintenance, testing
More informationI - Institutional Information
Indiana University East - Self Study - 4/14/2016 Page 1 I - Institutional Information To complete this section, first click on the Edit/Checkout button. Then copy and paste the headings into the Institutional
More informationCanadian Technology Accreditation Criteria (CTAC) INDUSTRIAL ENGINEERING TECHNOLOGY - TECHNOLOGIST Technology Accreditation Canada (TAC)
Canadian Technology Accreditation Criteria (CTAC) INDUSTRIAL ENGINEERING TECHNOLOGY - TECHNOLOGIST Technology Accreditation Canada (TAC) Preamble These CTAC are applicable to programs having titles involving
More informationPrerequisites: WorkKeys testing and a copy of high school diploma or GED.
MULTICRAFT MAINTENANCE Industrial Track or Facility Track Contact: Tim Broseus at (740) 364-2275 or tbroseus@c-tec.edu The supply/demand ratio for pre-trained multicraft maintenance technicians is high.
More informationIndustrial Design Technology
INFORMATION & APPLICATION GUIDE Industrial Design Technology Associate of Applied Science in Industrial Design Technology Certificate of Completion in Industrial Design Technology: SolidWorks Design Specialist
More informationindustrial & engineering technology
Automotive Construction Engineering Graphics HVAC Horticulture Industrial Electronics Industrial Supervision Machine Tool Mechatronics Welding industrial & engineering technology Automotive Technology
More informationDEGREES. Accounting (Associate in Science Degree) SUGGESTED SEMESTER SEQUENCE
Accounting Note: Students who plan to transfer to a four-year college or university are strongly encouraged to take a laboratory science. The accounting program has four goals: 1. To prepare students to
More informationYork County School Division GAITE Career Pathway Model for Electrical Engineering Technology
York County School Division GAITE Career Pathway Model for Electrical Technology Career Cluster: Science, Technology, and Mathematics Career Pathway: and Technology Technical Studies: Electrical Technology
More information2015-16. Catalog. Our Mission. 701 S. Mt. Vernon Ave. San Bernardino, CA 92410
Catalog 2015-16 701 S. Mt. Vernon Ave. San Bernardino, CA 92410 www.valleycollege.edu 909.384.4400 M U D N E D D A Your future starts here. Our Mission San Bernardino Valley College maintains a culture
More informationMidland College 2011 2012 Educational Program Assessment Computer Graphics Technology. Assessment Summary
Midland College 2011 2012 Educational Program Assessment Computer Graphics Technology The Computer Graphics Technology program prepares students for careers in the fields of process piping, structural
More informationAssessment of Learning Report Computer Science CPT Fall 2008 Spring 2010. I. Introduction and Background
Assessment of Learning Report Computer Science CPT Fall 2008 Spring 2010 AAS DEGREE: Computer Programming AAS DEGREE: Database Management AAS DEGREE: Telecommunications I. Introduction and Background Mission
More informationCNM Program Exit Competencies Program Name: Mechanical Technology AAS Degree Air Conditioning, Heating, and Refrigeration Certificate Programs
CNM Program Exit Competencies Program Name: Mechanical Technology AAS Degree Air Conditioning, Heating, and Refrigeration Certificate Programs Overview & Purpose: At the completion of this program students
More informationINSTITUTIONAL SUMMARY FORM PREPARED FOR COMMISSION REVIEWS
Southern Association of Colleges and Schools Commission on Colleges INSTITUTIONAL SUMMARY FORM PREPARED FOR COMMISSION REVIEWS GENERAL INFORMATION Name of Institution: Central Alabama Community College
More informationo Ivy Tech DESN 102- Technical Graphics DESN 103- CAD Fundamentals
Indiana Department of Education Academic Course Framework ARCHITECHTURAL DRAFTING AND DESIGN I Architectural Drafting and Design I Gives students a basic understanding of the detailing skills commonly
More informationDegrees Offered. Contact Information. Patrick Murphy 425-388-9534 pmurphy@everettcc.edu. Program Description. Skills Covered by Program
Everett Community College 2000 Tower St Everett, WA 98208 Everett Community College 2000 Tower St Everett, WA 98208 AVIATION MAINTENANCE TECHNICIAN Aviation Maintenance Technicians, also known as aircraft
More informationFall 2011 Philosophy 1 2 3 Fall 2011 Physical Education & Wellness 10 6 16 Fall 2011 Physical Science 0 1 1 Fall 2011 Physics 3 0 3 Fall 2011
Fall 2011 Energy Production/Chemistry 4 2 6 Fall 2011 Energy Production/Crafts Elec 1 2 3 Fall 2011 Energy Production/Crafts Mech 4 9 13 Fall 2011 Energy Production/HPRP 6 4 10 Fall 2011 Energy Production/Power
More informationCOURSE OUTLINE (Replaces PNCR and Course Outline)
Los Angeles Community College District COURSE OUTLINE (Replaces PNCR and Course Outline) Section I: BASIC COURSE INFORMATION OUTLINE STATUS: 1. COLLEGE: 2. SUBJECT (DISCIPLINE) NAME 1 ): (40 characters,
More informationhttp://www.bls.gov/oco/ocos112.htm Engineering Technicians
http://www.bls.gov/oco/ocos112.htm Engineering Technicians * Nature of the Work * Training, Other Qualifications, and Advancement * Employment * Job Outlook * Projections Data * Earnings * OES Data * Related
More information294 School of Technology. Associate of Applied Science Degree
294 Associate of Applied Science Degree Design Technologies...296 Architectural Engineering Technology...297 Architectural CAD Operator Certificate...298 Construction Inspector Certificate...298 CAD Technology...299
More informationI-BEST Enhanced FTE Program Summaries March 20, 2007
If you have any questions regarding the I-BEST Enhanced FTE Program, please contact Tina Bloomer at (360) 704-4325. Bellevue Community College Integrated Office Assistant Certificate for ESL (approved)
More informationAlgonquin College REPORT TO NETAC ON HUMAN RESOURCE MATTERS (September, 2011)
Algonquin College REPORT TO NETAC ON HUMAN RESOURCE MATTERS (September, 2011) Contact Person: Claude Brulé Dean, Faculty of Technology and Trades Algonquin College 1385 Woodroffe Avenue Ottawa, Ontario
More informationengineering AND Technology Degree programs
engineering AND Technology Degree programs Aeronautical engineering Technology Associate in Applied Science (AAS) Degree The AAS aeronautical engineering technology program stresses the fundamentals of
More information340 Skilled Trades Technologies. Associate of Applied Science Degree
340 Associate of Applied Science Degree Building Maintenance Major...242 Construction Trades Major...345 Electrical Major...346 Mechanical Major...348 Certificates Building Maintenance...343 Electrical...347
More informationTITLE 135 PROCEDURAL RULE WEST VIRGINIA COUNCIL FOR COMMUNITY AND TECHNICAL COLLEGE EDUCATION
TITLE 135 PROCEDURAL RULE WEST VIRGINIA COUNCIL FOR COMMUNITY AND TECHNICAL COLLEGE EDUCATION SERIES 11 DEGREE DESIGNATION, GENERAL EDUCATION REQUIREMENTS, NEW PROGRAM APPROVAL, AND DISCONTINUANCE OF EXISTING
More informationMORRIS COUNTY SCHOOL OF TECHNOLOGY 2015-2016 Times of Sessions AM Session: 8:00-10:43 PM Session: 12:06-2:52
MORRIS COUNTY SCHOOL OF TECHNOLOGY 2015-2016 Times of Sessions AM Session: 8:00-10:43 PM Session: 12:06-2:52 Morris County School of Technology provides students the opportunity to receive daily career
More informationJune 16, 2015. To Whom It May Concern:
June 16, 2015 To Whom It May Concern: This packet was created as a guide for individuals interested in learning more about computers and computer networking, and what s offered through the Cisco Networking
More informationFactors to Consider Before Buying a Motion Picture Book
Technical and Multimedia Education Courses The Technical and Multimedia Education Department offers courses in the areas of communications, energy, transportation, construction and manu facturing. Students
More informationMechanical Engineering Technologies
Technologies 1 Technologies Graduates of the Technology program are prepared to design mechanical systems, operate CAD systems, manage design projects, and perform product testing. Examples of graduate
More informationCover/Signature Page Full Template
Cover/Signature Page Full Template Institution Submitting Request: Utah Valley University Proposed Title: Certificate of Completion in Construction Management School or Division or Location: College of
More informationROAD TO SUCCESS. College of Applied Science and Technology. Business & Information Technology
College of Applied Science and Technology ROAD TO SUCCESS Since 1964, thousands of people have advanced their careers at Summit County s only community college. In 2014, the college reorganized and expanded
More information