Taking Subversion to a Higher Level. Branching/Merging Support. Component Management Support. And More
|
|
- Brian Johns
- 8 years ago
- Views:
Transcription
1 Taking Subversion to a Higher Level Branching/Merging Support Component Management Support And More
2 About Impact CM Impact CM is a Service AddOn that facilitates software configuration management (CM) by combined control across various tools. Abstracting visualisations and tool-independent query capabilities add an entirely new quality to the project management tool chain. The trend in software configuration management and change management goes towards the use of Open Source tools in combination with lightweight commercial tools. Today, this approach is only lacking a level of integration that would conveniently satisfy demanding CM requirements. Impact CM obtains data in various formats from the entire tool chain and combines their diverging structures into a single comprehensive view. This comprehensive view is built on an open CM domain model, which was developed from established standards as well as our professional experience. Using presently available interfaces to the tools employed, all data of consequence is obtained, and, via model transformation, added to the tool independent CM model. Synchronisation of various tools' data, processing and visualisation are fully automated. Notably, the visualised model also allows directly carrying out synchronised actions across the entire tool chain. Applications of Impact CM Fig. 1: Tool neutrality in the Impact CM model The current version of Impact CM so far integrates only few tools and provides just basic functionality. Although it can be productively applied to certain situations without further adjustment, it should be regarded as a basic technology that can be adjusted relatively easily to match concrete processes and requirements in a given enterprise or project, providing considerable reduction of work load. In order to enable users of Impact CM to realize appropriate adjustments and to benefit from each others' improvements, Impact CM will be available as Open Source software, licensed under the LGPL V elego Software Solutions GmbH Phone: /6
3 Use with Subversion & friends Due to the model based approach of Impact CM, Subversion can be integrated with various tools to provide a highly integrated CM tool. Furthermore, some concepts still entirely missing in Subversion can be provided by Impact CM, and conceptual weaknesses can be balanced out. Above all, Impact CM provides outstanding transparency of development and configuration structures by effectively visualizing the underlying model. Graphical branching and merging support Let's assume a task based operation method is applied via a given change management tool. An automatically synchronizing CM model can now visualize all lines of development as well as the complete merge history, based on the underlying tasks (see fig. 2). Locating change sets across development lines Fig. 2: Visualization of development lines, including merges and tasks. When bugs have been fixed on certain development lines, developers and managers face the same questions over and over: which change caused the bug? Which other development lines exhibit the same buggy code, and which development lines already have a fix for this problem? With the aid of the additional information available within the CM model, these questions can be answered easily. Prospects: Component Management Support Besides the concept of development lines, Impact CM also tracks the description of software products in an assembly structure. By means of the assembly model, product artifacts are structured within a complete product hierarchy which is guided by the actual process of assembling a product from components. In this context all configuration elements which are necessary for building the entire product become product artifacts. These include own as well as third-party libraries, source files, elements of a programming language (Class, Interface, etc.) as well as descriptive elements, such as models, documentation, GUI, etc elego Software Solutions GmbH Phone: /6
4 The assembly model defines the features, relations, and dependencies of the product artifacts in a tool-independent format. It includes the concrete physical representation (e.g. Subversion URL and revision) within the baseline. The assembly model also synchronizes Subversion's metadata and uses it to streamline component management via SVN-Externals. Each product's components and their versions, tasks and releases can be visualized and configured comfortably (see fig. 3). Fig. 3: Component management via assembly model Technology The Eclipse platform and the Eclipse Modeling Framework (EMF) represent the basic technology for the realization of model based repositories. Both are released under Open Source licenses. Impact CM combines and integrates the following frameworks and technologies, which are based on Object Management Group (OMG) standards: EMF Eclipse Modeling Framework, Open Source Java implementation (Ecore) of the Meta Object Facility (MOF respectively EMOF) QVT model to model transformation of the OMG language specification Query View Transformation (QVT) which belongs to the MOF standard OCL Model validation, implementation of the OMG Object Constrained Language (OCL) GMF Graphical modeling, providing of a generic component and runtime infrastructure to develop graphical editors via the Graphical Modeling EMF Compare Model comparison, provides the generic support for the comparison and the merge of models. Teneo Model consistency, data base consistency solution via the use of Hibernate Zest Model visualization, visualization library for Eclipse based components 2011 elego Software Solutions GmbH Phone: /6
5 Impact CM domain model essentials The Impact CM domain model consists of the following basic elements -- among others: Artifact One file (source code, library, document ) Configuration Item Configuration Component An artifact that is put under configuration management. A set of selected configuration items. A configuration can be a configuration item itself. A configuration fragment set apart for design reasons. Product Version Release Baseline Change Set Task Development Line Mainline Release Branch Product Release A complete system or product configuration. The distinct state of a configuration item at a fixed point in time. Release of a configuration. A certain configuration that was chosen for managing the development process, which is purposefully designed, secured, and released when it attains appropriate quality. During the design phase, before being secured, a baseline is also often called a target baseline. A set of changes to a configuration in the course of an atomic step of development. A specific change request for a given product. Tasks trigger new baselines. Represents the development of a software configuration over a certain period of time. Main development line of product development (in Subversion often called trunk). Separate development line to stabilize up to a release, and then to maintain that release. Unique identification of a product release (in Subversion realized as tags) elego Software Solutions GmbH Phone: /6
6 Impact CM at a glance Impact CM enables... tool independent integration of version control and change management (so far out-ofthe-box support for Subversion combined with Bugzilla, CollabNet TeamForge, JIRA and Trac) continuous synchronization of information from version control and change management via a central product model bridging over missing concepts of individual tools on model level maintaining one integrated baseline for all system components secure traceability of entire system configurations Transparent project management, safer operation and time savings... by visualization of development lines and their changes by visualization of entire product configurations, as a basis for discussing changes, enhancements and their effect, to clarify architectural questions, variants, and so forth. because of proper tool support for CM activities on product level by automation of management steps previously taken manually Openness and long term robustness... by the use of Open Source Eclipse technology based on OMG standards by independence from tools and manufacturers via open interfaces Cost savings and flexibility... by avoiding expensive, monolithic tools for the benefit of cheap, flexible individual tools while maintaining the same scope of features, or by integrating individual tools that are already in use. because there are no license fees. Support for Impact CM and the tools that it integrates can be tailored to individual customers' needs elego Software Solutions GmbH Phone: /6
Impact CM: Model-Based Software Change and Configuration Management
Title Impact CM: Model-Based Software Change and Configuration Management Eclipse Integrated Development Day Berlin, 30 May 2012 Michael Diers elego Software Solutions GmbH 2012 1 Agenda
More informationSoftware configuration management
Software Engineering Theory Software configuration management Lena Buffoni/ Kristian Sandahl Department of Computer and Information Science 2015-09-30 2 Maintenance Requirements System Design (Architecture,
More informationCMII in Software Development Based on Open Source Tools. CMII Conference Europe 2006 Michael Diers, Olaf Kosel
CMII in Software Development Based on Open Source Tools Michael Diers, Olaf Kosel Presentation Outline Introduction Evaluation criteria for an OS out of the box solution Tool evaluation Short presentation
More informationIKAN ALM Architecture. Closing the Gap Enterprise-wide Application Lifecycle Management
IKAN ALM Architecture Closing the Gap Enterprise-wide Application Lifecycle Management Table of contents IKAN ALM SERVER Architecture...4 IKAN ALM AGENT Architecture...6 Interaction between the IKAN ALM
More informationModellrepository @ T-Mobile Umsetzung und Einsatz
1 Modellrepository @ T-Mobile Umsetzung und Einsatz ix CeBIT Forum 2009 Carsten Sensler, T-Mobile Deutschland GmbH 3/9/09 1 Table of Contents!! SOA Backplane overview!! Model repository @ T-Mobile!! Domain
More informationPromotion Model. CVS SUITE QUICK GUIDE 2009 Build 3701 February 2010. March Hare Software Ltd
CVS SUITE QUICK GUIDE 2009 Build 3701 February 2010 March Hare Software Ltd Legal Notices Legal Notices There are various product or company names used herein that are the trademarks, service marks, or
More informationFrom: William C. Brown corey@spectrumsoftware.net (770)448-8662
Subject: Version Control is Not Configuration Management Spectrum Software, Inc. 6855 Jimmy Carter Blvd. Suite 2150 Norcross, GA 30071 www.spectrumscm.com Issue Date: February 11 th, 2002 From: William
More informationDesign of Visual Repository, Constraint and Process Modeling Tool based on Eclipse Plug-ins
Design of Visual Repository, Constraint and Process Modeling Tool based on Eclipse Plug-ins Rushiraj Heshi Department of Computer Science and Engineering Walchand College of Engineering, Sangli Smriti
More informationOverview. Stakes. Context. Model-Based Development of Safety-Critical Systems
1 2 Model-Based Development of -Critical Systems Miguel A. de Miguel 5/6,, 2006 modeling Stakes 3 Context 4 To increase the industrial competitiveness in the domain of software systems To face the growing
More informationINNOVATOR. The integrated tool suite for business process and software engineering
The integrated tool suite for business process and software engineering Use the synergy: The integrated tool suite for business process and software engineering is the only integrated tool suite for business
More informationTransforming PICTURE to BPMN 2.0 as Part of the Model-driven Development of Electronic Government Systems
Heitkötter, Henning, Transforming PICTURE to BPMN 2.0 as Part of the Model-Driven Development of Electronic Government Systems, 44th Hawaii International Conference on System Sciences (HICSS), pp. 1 10,
More informationTowards Collaborative Requirements Engineering Tool for ERP product customization
Towards Collaborative Requirements Engineering Tool for ERP product customization Boban Celebic, Ruth Breu, Michael Felderer, Florian Häser Institute of Computer Science, University of Innsbruck 6020 Innsbruck,
More informationVICCI. The Eclipse Modeling Framework (EMF) A Practical Introduction and Technology Overview. Dipl.-Inf. Christoph Seidl
VICCI Visual and Interactive Cyber-Physical Systems Control and Integration The Eclipse Modeling Framework (EMF) A Practical Introduction and Technology Overview Dipl.-Inf. Christoph Seidl Overview of
More informationModel Driven Interoperability through Semantic Annotations using SoaML and ODM
Model Driven Interoperability through Semantic Annotations using SoaML and ODM JiuCheng Xu*, ZhaoYang Bai*, Arne J.Berre*, Odd Christer Brovig** *SINTEF, Pb. 124 Blindern, NO-0314 Oslo, Norway (e-mail:
More informationComparison of Model-Driven Architecture and Software Factories in the Context of Model-Driven Development
Comparison of Model-Driven Architecture and Software Factories in the Context of Model-Driven Development Ahmet Demir Technische Universität München Department of Informatics Munich, Germany AhmetDemir@gmx.de
More informationSIMATIC IT Production Suite Answers for industry.
Driving Manufacturing Performance SIMATIC IT Production Suite Answers for industry. SIMATIC IT at the intersection of value creation processes With SIMATIC IT, Siemens is broadening the scope of MES. Plant
More informationAnalysis of the Specifics for a Business Rules Engine Based Projects
Analysis of the Specifics for a Business Rules Engine Based Projects By Dmitri Ilkaev and Dan Meenan Introduction In recent years business rules engines (BRE) have become a key component in almost every
More informationPerformance Management Platform
Open EMS Suite by Nokia Performance Management Platform Functional Overview Version 1.4 Nokia Siemens Networks 1 (16) Performance Management Platform The information in this document is subject to change
More informationEfficient Management of Tests and Defects in Variant-Rich Systems with pure::variants and IBM Rational ClearQuest
Efficient Management of Tests and Defects in Variant-Rich Systems with pure::variants and IBM Rational ClearQuest Publisher pure-systems GmbH Agnetenstrasse 14 39106 Magdeburg http://www.pure-systems.com
More informationA Tool Suite for the Generation and Validation of Configurations for Software Availability
A Tool Suite for the Generation and Validation of Configurations for Software Availability A. Gherbi 1, A. Kanso 1, F. Khendek 1, M. Toeroe 2 and A. Hamou-Lhadj 1 1 Concordia University, Montréal, Canada
More informationWhat is Enterprise Architect? Enterprise Architect is a visual platform for designing and constructing software systems, for business process
1 2 3 What is Enterprise Architect? Enterprise Architect is a visual platform for designing and constructing software systems, for business process modeling, and for more generalized modeling purposes.
More informationUML Profiling Comes of Age Realizing the Potential of Domain-Specific Modeling
UML Profiling Comes of Age Realizing the Potential of Domain-Specific Modeling PATHS TO DOMAIN-SPECIFIC MODELING... 1 UML PROFILING... 2 The Origin of the UML Profiling Specifications... 2 The Vision...
More informationRational Software White Paper
Unified Change Management from Rational Software: An Activity-Based Process for Managing Change Rational Software White Paper Table of Contents INTRODUCTION... 1 CHANGE IN THE SOFTWARE DEVELOPMENT PROCESS...
More informationAutomatic Generation of Consistency-Preserving Edit Operations for MDE Tools
Automatic Generation of Consistency-Preserving Edit Operations for MDE Tools Michaela Rindt, Timo Kehrer, Udo Kelter Software Engineering Group University of Siegen {mrindt,kehrer,kelter}@informatik.uni-siegen.de
More informationPLM System Integration
PLM System Integration We integrate your PLM processes Automatically Reliable End-to-End M a k e e v e r y t h i n g a s s i m p l e a s Process integration The integration of processes and product data
More informationTheme 1 Software Processes. Software Configuration Management
Theme 1 Software Processes Software Configuration Management 1 Roadmap Software Configuration Management Software configuration management goals SCM Activities Configuration Management Plans Configuration
More informationOpen Source egovernment Reference Architecture Osera.modeldriven.org. Copyright 2006 Data Access Technologies, Inc. Slide 1
Open Source egovernment Reference Architecture Osera.modeldriven.org Slide 1 Caveat OsEra and the Semantic Core is work in progress, not a ready to use capability Slide 2 OsEra What we will cover OsEra
More informationvs. Web Site: www.soebes.com Blog: blog.soebes.com Email: info@soebes.com Dipl.Ing.(FH) Karl Heinz Marbaise
Project Organization vs. Build- and Configuration Management Web Site: www.soebes.com Blog: blog.soebes.com Email: info@soebes.com Dipl.Ing.(FH) Karl Heinz Marbaise Agenda 1.Initialization 2.Specification
More informationDesigning a Semantic Repository
Designing a Semantic Repository Integrating architectures for reuse and integration Overview Cory Casanave Cory-c (at) modeldriven.org ModelDriven.org May 2007 The Semantic Metadata infrastructure will
More informationHow To Do Continuous Integration
Continuous Integration for Safety Critical Systems Thomas Schütz Protos Software GmbH ASQF Safety Day 24.06.2014 Protos Software GmbH Methods and Tools Domain Specific Languages (DSL) Modelingtools Embedded
More informationDevelopment of Tool Extensions with MOFLON
Development of Tool Extensions with MOFLON Ingo Weisemöller, Felix Klar, and Andy Schürr Fachgebiet Echtzeitsysteme Technische Universität Darmstadt D-64283 Darmstadt, Germany {weisemoeller klar schuerr}@es.tu-darmstadt.de
More informationQA & Test Management. Overview. www.intland.com
Agile, Waterfall & Hybrid Method Support SAFe Template for Scaling Agile Git, SVN, Mercurial Integration Release IT Operations & DevOps Baselining (Versioning) Integrated with requirements and QA & Testing
More informationConfiguration Management in a Software Product Line
Configuration Management in a Software Product Line John D. McGregor School of Computing Clemson University Clemson, SC 29634 johnmc@cs.clemson.edu Sholom Cohen Software Engineering Institute Carnegie
More informationTool support for Collaborative Software Quality Management
Tool support for Collaborative Software Quality Management Philipp Kalb and Ruth Breu Institute of Computer Science University of Innsbruck Email: philipp.kalb, ruth.breu@uibk.ac.at Abstract. Nowadays
More informationRequirements for Standard Compliant Electrical Test Authoring in Manufacturing Applications
Requirements for Standard Compliant Electrical Test Authoring in Manufacturing Applications Dipl. Ing. Alfons Schulte DSA-Daten-- Daten- und Systemtechnik GmbH, Aachen DSA-GmbH_PR_040308 Topics Authoring
More informationA Model Repository for Collaborative Modeling with the Jazz Development Platform
A Model Repository for Collaborative Modeling with the Jazz Development Platform Christian Bartelt University of Clausthal christian.bartelt@tu-clausthal.de Georg Molter Zühlke Engineering GmbH Georg.Molter@zuehlke.com
More informationIBM Rational ClearCase, Version 8.0
IBM Rational ClearCase, Version 8.0 Improve software and systems delivery with automated software configuration management solutions Highlights Improve software delivery and software development life cycle
More informationLive Model Pointers A requirement for future model repositories
Live Model Pointers A requirement for future model repositories Keith Duddy QUT/Smart Services CRC 8 April 2009 1 Introduction Model interoperability is a topic that assumes that models are created and
More informationEnterprise Application Deployment: Amodel driven approach
Enterprise Application Deployment: Amodel driven approach Peter Golibrzuch Lufthansa Technik AG peter.golibrzuch@lht.dlh.de Alexander Holbreich Lufthansa Systems AG alexander.holbreich@lhsystems.com Simon
More informationJOURNAL OF OBJECT TECHNOLOGY
JOURNAL OF OBJECT TECHNOLOGY Online at http://www.jot.fm. Published by ETH Zurich, Chair of Software Engineering JOT, 2007 Vol. 6, No. 1, January-February 2007 CM Configuration Change Management John D.
More informationSoftware Development Kit
Open EMS Suite by Nokia Software Development Kit Functional Overview Version 1.3 Nokia Siemens Networks 1 (21) Software Development Kit The information in this document is subject to change without notice
More informationWHITE PAPER DATA GOVERNANCE ENTERPRISE MODEL MANAGEMENT
WHITE PAPER DATA GOVERNANCE ENTERPRISE MODEL MANAGEMENT CONTENTS 1. THE NEED FOR DATA GOVERNANCE... 2 2. DATA GOVERNANCE... 2 2.1. Definition... 2 2.2. Responsibilities... 3 3. ACTIVITIES... 6 4. THE
More informationEvaluating OO-CASE tools: OO research meets practice
Evaluating OO-CASE tools: OO research meets practice Danny Greefhorst, Matthijs Maat, Rob Maijers {greefhorst, maat, maijers}@serc.nl Software Engineering Research Centre - SERC PO Box 424 3500 AK Utrecht
More informationFederated, Generic Configuration Management for Engineering Data
Federated, Generic Configuration Management for Engineering Data Dr. Rainer Romatka Boeing GPDIS_2013.ppt 1 Presentation Outline I Summary Introduction Configuration Management Overview CM System Requirements
More informationVersion Control Tools
Version Control Tools Source Code Control Venkat N Gudivada Marshall University 13 July 2010 Venkat N Gudivada Version Control Tools 1/73 Outline 1 References and Resources 2 3 4 Venkat N Gudivada Version
More informationGenerating Edit Operations for Profiled UML Models
Generating Edit Operations for Profiled UML Models Timo Kehrer, Michaela Rindt, Pit Pietsch, Udo Kelter Software Engineering Group University of Siegen {kehrer,mrindt,pietsch,kelter}@informatik.uni-siegen.de
More informationAgile ALM. Lightweight tools and Agile strategies MANNING MICHAEL HUTTERMANN. Shelter Island
Agile ALM Lightweight tools and Agile strategies MICHAEL HUTTERMANN II MANNING Shelter Island contents preface xv acknowledgments about this book xix xvii about the cover illustration xxv *art 1 Introduction
More informationDefinition and Generation of Data Exchange Formats in AUTOSAR
Definition and Generation of Data Exchange Formats in AUTOSAR Mike Pagel 1 and Mark Brörkens 2 1 BMW AG, Knorrstr. 147, 80788 München, Germany mike.pagel@bmw.de 2 Carmeq GmbH, Carnotstr. 4, 10587 Berlin,
More informationThe BPM to UML activity diagram transformation using XSLT
The BPM to UML activity diagram transformation using XSLT Ondřej Macek 1 and Karel Richta 1,2 1 Department of Computer Science and Engineering, Faculty of Electrical Engineering, Czech Technical University,
More informationApplication Lifecycle Management White Paper. Source Code Management Best Practice: Applying Economic Logic to Migration ALM
ALM Application Lifecycle Management White Paper Source Code Management Best Practice: Applying Economic Logic to Migration Summary: Is there a Business Case for Migration? Ultimately, what is the value
More informationQuality Assurance of Software Models within Eclipse using Java and OCL
Quality Assurance of Software Models within Eclipse using Java and OCL Dr. Thorsten Arendt Modellgetriebene Softwareentwicklung mobiler Anwendungen Wintersemester 2014/15 17. Dezember 2014 Outline Why
More informationAutomating the Development of Information Systems with the MOSKitt Open Source Tool
http://www.moskitt.org Automating the Development of Information Systems with the MOSKitt Open Source Tool Vicente Pelechano Universidad Politécnica de Valencia Content PART I: About the Project and the
More informationMeister Going Beyond Maven
Meister Going Beyond Maven A technical whitepaper comparing OpenMake Meister and Apache Maven OpenMake Software 312.440.9545 800.359.8049 Winners of the 2009 Jolt Award Introduction There are many similarities
More information2 AIMS: an Agent-based Intelligent Tool for Informational Support
Aroyo, L. & Dicheva, D. (2000). Domain and user knowledge in a web-based courseware engineering course, knowledge-based software engineering. In T. Hruska, M. Hashimoto (Eds.) Joint Conference knowledge-based
More informationConfiguration & Build Management
Object-Oriented Software Engineering Using UML, Patterns, and Java Configuration & Build Management Outline of the Lecture Purpose of Software Configuration Management (SCM) Some Terminology Software Configuration
More informationSystem Software Product Line
System Software Product Line 2 1 Introduction The concept of Software Product Lines has been developed for more than a decade. Being initially an academic topic, product lines are more and more incorporated
More informationA Java Tool for Creating ISO/FGDC Geographic Metadata
F.J. Zarazaga-Soria, J. Lacasta, J. Nogueras-Iso, M. Pilar Torres, P.R. Muro-Medrano17 A Java Tool for Creating ISO/FGDC Geographic Metadata F. Javier Zarazaga-Soria, Javier Lacasta, Javier Nogueras-Iso,
More informationRecent Advances in Eclipse QVTO!
!! National Aeronautics and Recent Advances in Eclipse QVTO! Nicolas Rouquette Principal Computer Scientist, Systems and Software Division 2012. Government sponsorship acknowledged. Outline! A Condensed
More informationSuccessfully managing geographically distributed development
IBM Rational SCM solutions for distributed development August 2004 Successfully managing geographically distributed development Karen Wade SCM Product Marketing Manager IBM Software Group Page 2 Contents
More informationBusiness-Driven Software Engineering Lecture 3 Foundations of Processes
Business-Driven Software Engineering Lecture 3 Foundations of Processes Jochen Küster jku@zurich.ibm.com Agenda Introduction and Background Process Modeling Foundations Activities and Process Models Summary
More informationMDA Transformations Applied to Web Application Development 1
MDA Transformations Applied to Web Application Development 1 Santiago Meliá 1, Andreas Kraus 2, and Nora Koch 2, 3 1 Universidad de Alicante, Spain 2 Ludwig-Maximilians-Universität München, Germany 3 F.A.S.T
More informationDAVE Usage with SVN. Presentation and Tutorial v 2.0. May, 2014
DAVE Usage with SVN Presentation and Tutorial v 2.0 May, 2014 Required DAVE Version Required DAVE version: v 3.1.6 or higher (recommend to use the most latest version, as of Feb 28, 2014, v 3.1.10) Required
More informationOne solution for all your Source Configuration Management Needs
One solution for all your Source Configuration Management Needs SPECTRUM SOFTWARE, Inc. 11445 Johns Creek Parkway Suite 300 Duluth, GA 30097 Ph: 770-448-8662 Fax: 678-473-9294 www.spectrumscm.com www.spectrumsoftware.net
More informationBridging the Generic Modeling Environment (GME) and the Eclipse Modeling Framework (EMF)
Bridging the Generic ing Environment () and the Eclipse ing Framework (EMF) Jean Bézivin (), Christian Brunette (2), Régis Chevrel (), Frédéric Jouault (), Ivan Kurtev () () ATLAS Group (INRIA & LINA,
More informationMOTION Modeling and Testing for System and Service Solutions. ModelBus. Automation, Integration and Collaboration in Development Processes
MOTION Modeling and Testing for System and Service Solutions ModelBus Automation, Integration and Collaboration in Development Processes 1 » ModelBus enables our clients to reach a much higher consistency
More informationIntegrity 10. Curriculum Guide
Integrity 10 Curriculum Guide Live Classroom Curriculum Guide Integrity 10 Workflows and Documents Administration Training Integrity 10 SCM Administration Training Integrity 10 SCM Basic User Training
More informationContinuous Integration
Continuous Integration Collaborative development issues Checkout of a shared version of software ( mainline ) Creation of personal working copies of developers Software development: modification of personal
More informationProject VIDE Challenges of Executable Modelling of Business Applications
Project VIDE Challenges of Executable Modelling of Business Applications Radoslaw Adamus *, Grzegorz Falda *, Piotr Habela *, Krzysztof Kaczmarski #*, Krzysztof Stencel *+, Kazimierz Subieta * * Polish-Japanese
More informationWinery A Modeling Tool for TOSCA-based Cloud Applications
Institute of Architecture of Application Systems Winery A Modeling Tool for TOSCA-based Cloud Applications Oliver Kopp 1,2, Tobias Binz 2, Uwe Breitenbücher 2, and Frank Leymann 2 1 IPVS, 2 IAAS, University
More informationmodelbus automation, integration and collaboration in development processes
Fraunhofer Institute for Open communication systems FOKUS modelbus automation, integration and collaboration in development processes ModelBus improves development and test processes by injecting automation
More informationBuilding industrial sensors with MDSD
Building industrial sensors with MDSD Bernhard Merkle Central Department Research & Development Software-Engineering SICK-AG Waldkirch mailto: Bernhard.Merkle@sick.de mailto: Bernhard.Merkle@gmail.com
More informationEclipse BPMN Modeler Introducing Intalio Designer
Eclipse BPMN Modeler Introducing Intalio Designer Arnaud Blandin Ismael Ghalimi Hugues Malphettes Intalio Inc, EMEA Manager Intalio Inc, CEO Intalio Inc, Lead Developer 6 rue du conseil general 1205 Geneva
More informationIntroduction to Programming Tools. Anjana & Shankar September,2010
Introduction to Programming Tools Anjana & Shankar September,2010 Contents Essentials tooling concepts in S/W development Build system Version Control System Testing Tools Continuous Integration Issue
More informationHP Systinet. Software Version: 10.01 Windows and Linux Operating Systems. Concepts Guide
HP Systinet Software Version: 10.01 Windows and Linux Operating Systems Concepts Guide Document Release Date: June 2015 Software Release Date: June 2015 Legal Notices Warranty The only warranties for HP
More informationThe ADOxx Metamodelling Platform Workshop "Methods as Plug-Ins for Meta-Modelling" in conjunction with "Modellierung 2010", Klagenfurt
The ADOxx Metamodelling Platform Workshop "Methods as Plug-Ins for Meta-Modelling" in conjunction with "Modellierung 2010", Klagenfurt Dr. Harald Kühn 24.03.2010 Agenda 1 Overview 2 Deployment and Integration
More informationAn MDA Approach for the Development of Web applications
An MDA Approach for the Development of Web applications Santiago Meliá Beigbeder and Cristina Cachero Castro {santi,ccachero}@dlsi.ua.es Univesidad de Alicante, España Abstract. The continuous advances
More informationBusiness Process Modeling Information Systems in Industry (372-1-4207 )
Business Process Modeling Information Systems in Industry (372-1-4207 ) Arnon Sturm The material of this presentation is adopted from various people including:, Pnina Soffer, Iris Reinhartz-Berger 1 Outline
More informationRequirements Management
MS Excel / Word, and ReqIF Export / Import and Round-trip Medical & Automotive Requirements and Risk (FMEA, IEC 62304, IEC 61508, ISO 26262...) Enterprise Architect and Atlassian JIRA integration Requirements
More informationTalend Metadata Manager. Reduce Risk and Friction in your Information Supply Chain
Talend Metadata Manager Reduce Risk and Friction in your Information Supply Chain Talend Metadata Manager Talend Metadata Manager provides a comprehensive set of capabilities for all facets of metadata
More information25 november 2008. SAAB Training Systems SESAM - Nov 2008, Göran Calås
1 Projekthantering vid MDE Konfigurations och projekt/linjestyrning med Model-Driven Engineering Göran Calås Project Manager Systems Architect Nov 20, 2008 goran.calas@saabgroup.com +46 768 967167 2 Göran
More informationMDA Overview OMG. Enterprise Architect UML 2 Case Tool by Sparx Systems http://www.sparxsystems.com. by Sparx Systems
OMG MDA Overview by Sparx Systems All material Sparx Systems 2007 Sparx Systems 2007 Page:1 Trademarks Object Management Group, OMG, CORBA, Model Driven Architecture, MDA, Unified Modeling Language, UML,
More informationSimplifying e Business Collaboration by providing a Semantic Mapping Platform
Simplifying e Business Collaboration by providing a Semantic Mapping Platform Abels, Sven 1 ; Sheikhhasan Hamzeh 1 ; Cranner, Paul 2 1 TIE Nederland BV, 1119 PS Amsterdam, Netherlands 2 University of Sunderland,
More informationSteady as She Goes. How the VIVO developers work to deliver a stable platform
Steady as She Goes How the VIVO developers work to deliver a stable platform Overview These practices: are by and for the Cornell development team. are applied to the main VIVO code base. The next challenge:
More informationAgile SPL-SCM: Agile Software Product Line Configuration and Release Management
Agile SPL-SCM: Agile Software Product Line Configuration and Release Management APLE 2006 Workshop SPLC 2006, Baltimore, MD Reto.Kurmann@phonak.com Phonak Hearing Systems Presentation Roadmap 1. Introduction
More informationModel Driven Development of Inventory Tracking System*
Model Driven Development of Inventory Tracking System* Gan Deng, Tao Lu, Emre Turkay Andrey Nechypurenko Aniruddha Gokhale, Douglas Schmidt ISIS, Vanderbilt University Siemens Nashville, TN 37221 Germany
More informationzen Platform technical white paper
zen Platform technical white paper The zen Platform as Strategic Business Platform The increasing use of application servers as standard paradigm for the development of business critical applications meant
More informationCoverity Services. World-class professional services, technical support and training from the Coverity development testing experts
Coverity Services World-class professional services, technical support and training from the Coverity development testing experts Coverity has helped over 1,100 customers around the globe assure the quality,
More informationSoftware Configuration Management
Steven J Zeil March 17, 2013 Contents 1 Problems 2 2 Common Practices 6 1 1 Problems Software Configuration Management Over time, a software system can exist in many versions: revisions created as developers
More informationEnabling Better Business Intelligence and Information Architecture With SAP Sybase PowerDesigner Software
SAP Technology Enabling Better Business Intelligence and Information Architecture With SAP Sybase PowerDesigner Software Table of Contents 4 Seeing the Big Picture with a 360-Degree View Gaining Efficiencies
More informationIBM Rational Software
IBM Rational Software Development Conference 2008 Collaborative Software Development An Introduction to Rational Team Concert Erich Gamma Distinguished Engineer, Jazz Technical Lead IBM Rational Zurich
More informationMetastorm BPM Interwoven Integration. Process Mapping solutions. Metastorm BPM Interwoven Integration. Introduction. The solution
Metastorm BPM Interwoven Integration Introduction A proven and cost effective solution for companies that need to create and maintain high volumes of Interwoven WorkSpaces and their associated documents
More informationHP SAP. Where Development, Test and Operations meet. Application Lifecycle Management
HP SAP Where Development, Test and Operations meet Application Lifecycle Management 1 Introduction 1.1 ALM CONCEPTS Application Lifecycle Management (ALM) empowers IT to manage the core application life-cycle,
More informationDemand & Requirements Management Software Development QA & Test Management IT Operations & DevOps Change Management Agile, SAFe, Waterfall Support
Demand & Requirements Management Software Development QA & Test Management IT Operations & DevOps Change Management Agile, SAFe, Waterfall Support Workflows with Business Process Management capabilities
More informationRELEASE HIGHLIGHTS INTRODUCING COLLABNET TEAMFORGE 8.2
INTRODUCING COLLABNET TEAMFORGE 8.2 2 COLLABNET TEAMFORGE 8.2 TEAMFORGE RELEASE HIGHLIGHTS TeamForge is the industry s #1 open platform for enterprise application development, delivery, and collaboration.
More informationEnabling Better Business Intelligence and Information Architecture With SAP PowerDesigner Software
SAP Technology Enabling Better Business Intelligence and Information Architecture With SAP PowerDesigner Software Table of Contents 4 Seeing the Big Picture with a 360-Degree View Gaining Efficiencies
More informationAn Oracle White Paper September 2011. Oracle Team Productivity Center
Oracle Team Productivity Center Overview An Oracle White Paper September 2011 Oracle Team Productivity Center Overview Oracle Team Productivity Center Overview Introduction... 1 Installation... 2 Architecture...
More informationTool Support for Software Variability Management and Product Derivation in Software Product Lines
Tool Support for Software Variability Management and Product Derivation in Software s Hassan Gomaa 1, Michael E. Shin 2 1 Dept. of Information and Software Engineering, George Mason University, Fairfax,
More informationUPROM Tool: A Unified Business Process Modeling Tool for Generating Software Life Cycle Artifacts
UPROM Tool: A Unified Business Process Modeling Tool for Generating Software Life Cycle Artifacts Banu Aysolmaz 1 and Onur Demirörs 2 1, 2 Informatics Institute, Middle East Technical University, Ankara,
More informationChap 1. Introduction to Software Architecture
Chap 1. Introduction to Software Architecture 1. Introduction 2. IEEE Recommended Practice for Architecture Modeling 3. Architecture Description Language: the UML 4. The Rational Unified Process (RUP)
More informationGECKO Software. Introducing FACTORY SCHEMES. Adaptable software factory Patterns
Introducing FACTORY SCHEMES Adaptable software factory Patterns FACTORY SCHEMES 3 Standard Edition Community & Enterprise Key Benefits and Features GECKO Software http://consulting.bygecko.com Email: Info@gecko.fr
More information