Tenor AF MultiPath Switch

Transcription

1 Tenor AF MultiPath Switch Answer and Disconnect Supervision Forced IP routing and IP port mapping Pass-through support for calls to Toll-free, local and special service numbers (ie. emergency services, etc.) Least Cost Routing with external Quintum VoIP Call Routing Server* Type 1 Caller ID/Name Support (Telcordia, ETSI, NTT and DTMF) Voice algorithms: G.723.1a, G.729ab, G.711 Modem over IP Choice of 2, 4, 6 or 8 FXS and/or FXO configurations Standard RJ-11 connectors Coding: A law, µ law Enhanced (Carrier Grade) Echo Cancellation: ITU Rec. G168, up to 128 msec tailsize Loop Start, Reverse Battery, Battery Disconnect Tandem/TDM Switching Maximum Call Rate: 900 calls/hour LAN Interface: Fast Ethernet port (10/100 Base-T) DHCP Client QoS Support: IP TOS, DiffServ SIP User Agent (RFC3261 compliant endpoint) SIP RFC2833 for DTMF signaling SIP Refer Method support Adaptive Voice Activity Detection (VAD) with Comfort Noise Generation (CNG) Up to 8 simultaneous VoIP calls Support for DNS-SRV Survivability - (Option only available in AFM, AFT and AFE )

2 SIP Outbound Proxy Supports up to 50 SIP endpoints Configuration / Management Auto-Provisionable Quintum Tenor Configuration Manager (GUI) for configuration of rem ote individual Tenors. Quintum Tenor Monitor (GUI) for alarm monitoring, call monitoring and CDR monitoring Remote Access with external Remote Management Session Server Dimensions: 1U High Chassis W 8 1/4" x H 2" x D 7" W 21cm x H 5.1cm x D 18.73cm Maximum weight: 1.3 lbs. (0.6kg) AC Power: Volts AC, 50/60 Hz, 22 watts Operating temperature: F (5-40 C) Telco: FCC Part 68, AS/ACIF S003, CS03, JATE AS/ACIFS002:2001 EMC: FCC Part 15 Class B, EN55022, EN55024, EN , EN , AS/NZS3260 Tenor AF MultiPath AFM Station AFG Trunk AFT Enterprise AFE 2 VoIP Calls 2 FXS/2 FXO 2 FXS/0 FXO 0 FXS/2 FXO N/A 4 VoIP Calls 4 FXS/4 FXO 4 FXS/0 FXO 0 FXS/4 FXO 4 FXS/2 FXO 6 VoIP Calls N/A N/A N/A 6 FXS/2 FXO 8 VoIP Calls N/A 8 FXS/0 FXO 0 FXS/8 FXO N/A Tenor AS MultiPath Switch Answer and Disconnect Supervision Forced IP routing and IP port mapping Pass-through support for calls to Toll-Free, local and special service numbers (ie. emergency services)

3 Least cost routing with external Quintum VoIP Call Routing Server* Type I Caller ID/Name support (Telcordia, ETSI, NTT and DTMF) Voice algorithms: G.723.1a, G.729ab, G.711 Modem over IP Choice of 2 or 4 FXS and/or FXO configurations Standard RJ-11 connectors Loop Start, Reverse Battery, Battery Disconnect Maximum Call Rate: 900 calls/hour LAN Interface: Fast Ethernet port (10/100 Base-T) DHCP Client QoS Support: IP TOS, DiffServ Coding: A law, µ law Enhanced (Carrier Grade) Echo Cancellation: ITU Rec. G168, up to 128 msec tailsize SIP User Agent (RFC3261 compliant endpoint) SIP RFC2833 for DTMF signaling SIP Refer Method support Adaptive Voice Activity Detection (VAD) with Comfort Noise Generation (CNG) NATAccess Up to 4 simultaneous VoIP calls Support for DNS Addressing Configuration / Management Quintum Tenor Configuration Ma nager (GUI) for configuration of remote individual Tenors. Quintum Tenor Monitor (GUI) for alarm monitoring, call monitoring and CDR monitoring SNMP-v2 Agent Dimensions: 1U High Chassis W 10 1/8" x H 2" x D 7" W 24.5cm x H 5.1cm x D 18.73cm Maximum weight: 3.5 lbs. (1.6kg) AC Power: Volts AC, 50/60 Hz, 35 watts Operating temperature: F (5-40 C) Operating humidity: 10% - 90% non-condensing Telco: FCC Part 68, AS/NZ 3260: 1 997: AS/ACIFS002:2001 EMC: FCC Part 15 Class B Safety: UL-1950, ACA TS001:1997 Tenor AS MultiPath ASM Station ASG 2 Simultaneous VoIP Calls 2 FXS / 2 FXO 2 FXS / 0 FXO 4 Simultaneous VoIP Calls 4 FXS / 4 FXO 4 FXS / 0 FXO

4 Tenor AX MultiPath Switch Answer and Disconnect Supervision Forced IP routing and IP port mapping Pass-through support for calls to Toll-Free, local and special service numbers (ie. emergency services, etc.) Least cost routing with external Quintum VoIP Call Routing Server* Type I Caller ID/Name support (Telcordia, ETSI, NTT and DTMF) Voice algorithms: G.723.1a, G.729ab, G.711 Fax support: Industry standard T.38 and Group III at 2.4, 4.8, 7.2, 9.6, 14.4 Kbps Modem over IP Choice of 8, 16, or 24 FXS and/or FXO configurations or a 48 FXO only configuration Standard 50 pin RJ-21 Telco connectors Coding: A-law, -law Enhanced (Carrier Grade) Echo Cancellation: ITU Rec. G168, up to 128 msec tailsize Loop Start, Reverse Battery, Battery Disconnect Tandem/TDM switching Maximum Call Rate: 1,800 calls/hour LAN Interface: 1 Fast Ethernet port (10/100 Base-T) DHCP Client QoS Support: IP TOS, DiffServ SIP User Agent SIP RFC2833 for DTMF signaling SIP Refer Method Support Adaptive Voice Activity Detection (VAD) with Comfort Noise Generation (CNG)

5 Up to 48 simultaneous VoIP calls Support for DNS-SRV Survivability - (Option only available in AXM, AXT and AXE ) SIP Outbound Proxy Supports up to 100 SIP endpoints Configuration/Management Auto-Provisionable Quintum Tenor Configuration Manager (GUI) for configuration of remote individual Tenors. Quintum Tenor Monitor (GUI) for alarm monitoring, call monitoring and CDR monitoring Remote access with external Remote Management Session Server Dimensions: 1U High Chassis W 17 3/8" x H 1 3/4" x D 10 3/4" W 44.5cm x H 4.5cm x D 27.6cm Maximum weight: 10 lbs. (4.55kg) AC Power: Volts AC, 50/60 Hz, 60 watts Operating temperature: F (5-40 C) Telco: FCC Par t 68, TS-016, TBR4, TS-038, CS03 EMC: FCC Part 15 EN55022, EN55024, EN , EN , AS/NZS3260 Tenor AX MultiPath AXM Station AXG Trunk AXT Enterprise AXE 8 Simultaneous 8 FXS / 8 8 FXS / 0 0 FXS / 8 8 FXS / 2 16 Simultaneous 16 FXS / FXS / 0 0 FXS / FXS / 2 24 Simultaneous 24 FXS / FXS / 0 0 FXS / FXS / 2 48 Simultaneous 0 FXS / 48 Tenor BX MultiPath Switch

6 Forced IP routing and IP port mapping PSTN pass-through support for calls to Toll-free, local, and special service numbers (emergency service, etc.) Least cost routing with external Quintum VoIP Call Routing Server* Caller ID Name and Number Voice algorithms: G.723.1a, G.729ab, G.711 Choice of 2, 4 or 8 BRI S/T ports MultiPath VoIP Switch or VoIP Gateway configurations Ports individually programmable to NT or TE configuration Standard RJ-45 connectors Coding: A law or µ-law Enhanced (Carrier Grade) echo cancellation: ITU Rec. G.168, up to 128 msecs tail size Signaling protocols: Net 3 ETSI EuroISDN (TBR3), AS/ACIF S031 (Australia), New Zealand Net3 (TNZ), QSIG VoIP to circuit, and circuit to circuit (Tandem/TDM) switching LAN interface: 1 Fast Ethernet port (10/100 Base-T) QoS Support: IP TOS, DiffServ Code Point H.323 v.3 Gateway and Integrated Gatekeeper+ SIP User Agent (RFC3261 compliant endpoint) SIP RFC2833 for DTMF Signaling SIP Refer Method support IVR/RADIUS server support for AAA with integrated multi-lingual IVR+ Adaptive Voice Activity Detection (VAD) with comfort noise generation (CNG) Adaptive jitter buffer Security: IP filtering Up to 16 simultaneous VoIP calls Support for DNS-SRV Configuration/Management Auto-Provisionable Quintum Tenor Configuration Manager (GUI) for confi guration of remote individual Tenors Quintum Tenor Monitor (GUI) for alarm monitoring, call monitoring, and CDR monitoring Remote Access with external Remote Management Session Server (CLI) Dimensions (1U High Chassis) W 17 3/8" x H 1 3/4" x D 10 3/4" W 44.5cm x H 4.5cm x D 27.6cm Maximum weight: 8.25 lbs. (3.75kg) AC Power: Volts AC, 50/60 Hz, 35 watts Operating temperature: F (5-40 C) Telco: TBR3, AS/ACIF S031 EMC: EN55022, EN55024, EN , EN

7 TENOR DX SPECIFICATIONS Answer and Disconnect Supervision Forced routing Pass-through support for calls to Toll Free, local and special service numbers (emergency services, etc. ) Least Cost Routing with external Quintum VoIP Call Routing Server* Caller ID Name and Number Voice algorithms: G and G.729ab, G.711 Modem over IP Choice of 2, 4, 6, or 8 T1/E1/PRI Spans Standard RJ-45 Connectors Coding: A-law, ì-law Enhanced (Carrier Grade) Echo Cancellation: ITU Rec. G 168, up to 128 msec tailsize PRI Signaling Protocols: National ISDN-2, Euro ISDN NET5, Japan INS-NET1500, KDD, 4ESS, 5ESS, DMS100 T1 CAS (E&M, Loop Start, Feature Group-D, DTMF, MF) E1 CAS (R2 MF) DASS2 Tandem/TDM switching Maximum Call Rate: 7,200 calls/hour VoIP to circuit, and circuit to circuit (Tandem/TDM) switching LAN Interface: Fast Ethernet port (10/100 Base-T) QoS Support: IP TOS, DiffServ H.323 v.3 Gateway and Integrated Gatekeeper Support for multiple SIP User Agents (RFC3261 compliant endpoint) DTMF Signaling via FRC 2833 or SIP Info SIP Refer Method support IVR/RADIUS server support for AAA with integrated multilingual IVR Adaptive Voice Activity Detection (VAD) with Comfort Noise Genera tion (CNG) Up to 120 simultaneous VoIP calls Support for DNS-SRV Configuration/Management Quintum Tenor Configuration Manager (GUI) for configur ation of remote individual Tenors Quintum Tenor Monitor (GUI) for alarm monitoring, call monitoring and CDR monitoring

8 Remote Access with external Remote Management Session Server Dimensions (1U High Chassis) W 17 3/8" x H 1 3/4" x D 10 3/4" W 44.5cm x H 4.5cm x D 27.6cm Maximum weight: 8.25 lbs (3.75kg) AC Power: Volts AC, 50/60 Hz, 50 watts Operating temperature: F (5-40 C) Telco: FCC Part 68, TS -016, TBR4, TS-038, CS03 EMC: FCC Part 15, EN55022, EN55024, EN , EN TENOR CMS SPECIFICATIONS Answer and Disconnect supervision Automated load balancing Forced routing Pass-through support for calls to toll-free, local and special services numbers (i.e., emergency services) Least cost routing with Quintum VoIP Call Routing Server* Voice algorithms: G and G.729ab, G.711 Modem Over IP Coding: A-law, µ-law PRI Signaling Protocols: National ISDN-2, Euro ISDN NET5, Japan INS-NET1500, KDD, 4ESS, 5ESS, DMS100 T1 CAS (E&M, Loop Start, Feature Group-D, DTMF, MF)

9 E1 CAS (R2 MF) DASS2 Tandem/TDM switching Maximum Call Rate: 28,800 calls/hour SS7/C7 support using an external SS7 signaling gateway* VoIP to circuit, and circuit to circuit(tandem/tdm) switching LAN Interface: Fast Ethernet port (10/100 Base-T) Standard RJ-45 Interface (IEEE 802.3) for 10 Base-T or 100 Base-T connection QoS Support: IP TOS Configuration / Management Network Management Server interface for network-wide administration and monitoring Central provisioning and management Alarm/Fault detection and reporting Remote Access with external Remote Management Session Server H.323 v.3 Gateway and Integrated Gatekeeper Support for multiple SIP User Agents (RFC3261 compliant endpoint) DTMF Signaling via RFC2833 or SIP Info SIP Refer Method Support IVR/RADIUS server support for AAA with integrated multilingual IVR Adaptive Voice Activity Detection (VAD) with Comfort Noise Generation (CNG) Carrier Grade Echo Cancellation: ITU Rec. G.165/G.168, up to 128 msec tailsize Card Specifications System Controller (CPU) with Fast Ethernet port 10/100 Base-T DS-1 8 Port (T1/E1/PRI) Line Interface Card with built-in CSU. Individual spans software configurable between T1 and E1; accepts one or two plug-in DSP resource modules. DSP-120 DSP Resource Module supports up to 120 simultaneous VoIP calls Operating temperature: 40 F F (5 C - 40 C) Telco: FCC Part 68, TS -016, TBR4, TS-038, CS03 EMC: FCC Part 15 Class A, EN55022 Class A, EN55024, EN , EN Slot Chassis (1U) Dimensions: W 17 1/2" x H 1 3/4" x D 11 7/8" W 44.5cm x H 4.5cm x D 30.2cm Maximum weight: 11.5 lbs (5.25kg) AC Power: Volts AC, 50/60 Hz, 300 watts DC Power: Volts DC, 300 watts 8 Slot Chassis (4U) Dimensions: W 17" x H 7" x D 11 7/8" W 44.5cm x H 17.8cm x D 30.2cm Maximum weight: 27.6 lbs (12.5 kg) AC Power: Volts AC, 50/60 Hz, 600 watts DC Power: Volts DC, 600 watts