AN4571 Application note
|
|
|
- Marlene Morgan
- 8 years ago
- Views:
Transcription
1 Application note STM32 BLE toolbox for Android Introduction The application note describes the STM32 Bluetooth low energy (BLE) toolbox Android application (STSW-STM32153) to be used with an Android 4.3 with BLE mobile phone and an STM32 Nucleo board. The STM32 BLE toolbox Android application manages the BLE central device and the services provided by the STM32 Bluetooth low energy system solution. This STM32 BLE toolbox Android application is used for the following: Scanning of Bluetooth low energy peripheral devices Management of BLE peripheral GATT services Heart rate monitoring (HRM) service Health thermometer service (HTS) LEDs & buttons services (proprietary) Connect/disconnect validation procedure Figure 1. STM32 BLE toolbox for Android November 2014 DocID Rev 1 1/10 1
2 Contents AN4571 Contents 1 Getting started Android application installation Starting STM32 BLE toolbox STM32 BLE toolbox Android features Scanning BLE standard GATT services Heart rate monitoring service Health thermometer service Proprietary GATT services Button services LED service Connect/disconnect validation procedure Revision history /10 DocID Rev 1
3 Getting started 1 Getting started 1.1 Android application installation Copy STM32_BLE_Toolbox.apk to the SD card of your Android 4.3 mobile phone, by using a file explorer. Once the application is installed, the STM32 BLE toolbox icon is available on the application page. Figure 2. STM32 BLE toolbox icon 1.2 Starting STM32 BLE toolbox The application displays the following welcome page. Click on the butterfly to start scanning of the BLE peripheral devices. Figure 3. Welcome page DocID Rev 1 3/10 9
4 STM32 BLE toolbox Android features AN STM32 BLE toolbox Android features 2.1 Scanning The scanning procedure starts automatically after clicking the butterfly on the welcome page. Subsequently, scanning can be started or stopped by clicking the STOP / SCAN button. All the BLE scan peripheral devices are listed. Figure 4. BLE scan peripheral devices Select the peripheral device. Click the OPTION button to select the application on the device. Connection/disconnection loop is a test procedure used to stress the peripheral device by doing several BLE link connections disconnections. BLE Services Display is used to manage the peripheral device GATT services. Figure 5. Application selection option Select the application. The connection is done by clicking the peripheral device name. 4/10 DocID Rev 1
5 STM32 BLE toolbox Android features 2.2 BLE standard GATT services Heart rate monitoring service The peripheral device with the name STM32_HRM provides the heart rate monitoring service. Select STM32_HRM. All the services are displayed and the heart rate measurement recorded by the peripheral device can be retrieved by enabling the notification. (Notif/Indic button) Figure 6. Heart rate monitoring service DocID Rev 1 5/10 9
6 STM32 BLE toolbox Android features AN Health thermometer service The peripheral device with the name STM32_HTS provides the health thermometer service. Select STM32_HTS. All the services are displayed and the health temperature value recorded by the peripheral device can be retrieved by enabling the indication. (Notif/Indic button) Figure 7. Heath thermometer service The health thermometer service requires a bonding procedure which is launched automatically at the time connection. Before the connection, it is recommended to erase the existing paired devices via the Android standard Bluetooth settings parameter utility. 2.3 Proprietary GATT services Button services The button service concept is used to transfer information from the peripheral device to the central device (mobile phone) each time one of the three buttons is pushed. The peripheral device with the name LED_BUTT is used for the button service. Select LED_BUTT. All the services are displayed and the button update value recorded by the peripheral device can be retrieved by enabling the notification. (Notif/Indic button) Button1 sends the information 0x01 Button2 sends the information 0x02 Button3 sends the information 0x03 6/10 DocID Rev 1
7 STM32 BLE toolbox Android features Figure 8. Button service LED service The LED service concept is used to transfer information from the central device (mobile phone) to the peripheral device. The information transferred is used to switch ON/OFF one of the three LEDs available on the peripheral device. The peripheral device with the name LED_BUTT provides the led service. Select LED_BUTT. All the services are displayed and the led status from the mobile phone device can be provided either by writing the hex value LED1 = bit[0], LED2 = bit[1], LED3 = bit[2], or by pushing individual ON/OFF led buttons. Figure 9. LED service DocID Rev 1 7/10 9
8 STM32 BLE toolbox Android features AN Connect/disconnect validation procedure The connection/disconnection concept is used to verify and stress the consecutive fast connection and disconnection from the mobile phone side. This test gives a good indication on the robustness of the system. Select the Connection/disconnection loop option. The STM32 BLE toolbox enters the test mode procedure. Select the number of preferred consecutive connection/disconnection by pushing the button OPTION. The test starts after the pushing the button CONNECT. When the test ends, the test execution time is provided. Figure 10. Connection/disconnection loop test 8/10 DocID Rev 1
9 Revision history 3 Revision history Table 1. Document revision history Date Revision Changes 05-Nov initial release. DocID Rev 1 9/10 9
10 IMPORTANT NOTICE PLEASE READ CAREFULLY STMicroelectronics NV and its subsidiaries ( ST ) reserve the right to make changes, corrections, enhancements, modifications, and improvements to ST products and/or to this document at any time without notice. Purchasers should obtain the latest relevant information on ST products before placing orders. ST products are sold pursuant to ST s terms and conditions of sale in place at the time of order acknowledgement. Purchasers are solely responsible for the choice, selection, and use of ST products and ST assumes no liability for application assistance or the design of Purchasers products. No license, express or implied, to any intellectual property right is granted by ST herein. Resale of ST products with provisions different from the information set forth herein shall void any warranty granted by ST for such product. ST and the ST logo are trademarks of ST. All other product or service names are the property of their respective owners. Information in this document supersedes and replaces information previously supplied in any prior versions of this document STMicroelectronics All rights reserved 10/10 DocID Rev 1
32F072BDISCOVERY. Discovery kit for STM32F072xx microcontrollers. Features. Description
Discovery kit for STM32F072xx microcontrollers Data brief Features STM32F072RBT6 microcontroller featuring 128 KB of Flash memory, 16 KB of SRAM in an LQFP64 package On-board ST-LINK/V2 with switch to
UM1676 User manual. Getting started with.net Micro Framework on the STM32F429 Discovery kit. Introduction
User manual Getting started with.net Micro Framework on the STM32F429 Discovery kit Introduction This document describes how to get started using the.net Micro Framework (alias NETMF) on the STM32F429
SPC5-FLASHER. Flash management tool for SPC56xx family. Description. Features
Flash management tool for SPC56xx family Data brief Flash verify: check the Flash content with a binary image file Unsecure sequence for censored device: sending the private password selected from the
AN4646 Application note
Application note Peripheral interconnections on STM32F401 and STM32F411 lines Introduction On top of the highest performance and the lowest power consumption of the STM32F4 family, STM32F401/411 peripherals
STSW-IDW002. Hands-On Training for SPWF01SC and SPWF01SA Wi-Fi modules. Features. Description
Hands-On Training for SPWF01SC and SPWF01SA Wi-Fi modules Data brief Features Hands-On Training to evaluate and learn the SPWF01Sx series of Wi-Fi modules on reference designs such as the X-NUCLEO- IDW01M1
UM1727 User manual. Getting started with STM32 Nucleo board software development tools. Introduction
User manual Getting started with STM32 Nucleo board software development tools Introduction The STM32 Nucleo board is a low-cost and easy-to-use development platform used to quickly evaluate and start
Single LNB supply and control IC DiSEqC 1.X compliant with EXTM based on the LNBH29 in a QFN16 (4x4) Description
Single LNB supply and control IC DiSEqC 1.X compliant with EXTM based on the LNBH29 in a QFN16 (4x4) Data brief Low-drop post regulator and high-efficiency step-up PWM with integrated power N-MOS allowing
M24LRxx/CR95HF application software installation guide
User manual M24LRxx/CR95HF application software installation guide Introduction This user manual describes the procedures to install the different software drivers required to use the DEVKIT-M24LR-A development
UM1727 User manual. Getting started with STM32 Nucleo board software development tools. Introduction
User manual Getting started with STM32 Nucleo board software development tools Introduction The STM32 Nucleo board (NUCLEO-F030R8, NUCLEO-F072RB, NUCLEO-F103RB, NUCLEO-F302R8, NUCLEO-F401RE, NUCLEO-L152RE)
DSL03. Low capacitance TVS for high speed lines such as xdsl. Description. Features. Complies with the following standards
Low capacitance TVS for high speed lines such as xdsl Description Datasheet - production data Features High surge capability to comply with GR-1089 and ITU-T K20/21 Keeps its peak power capability up to
EVAL6491HB. Demonstration board for L6491 gate driver with smartsd. Description. Features
Demonstration board for L6491 gate driver with smartsd Description Data brief Features High voltage rail up to 600 V dv/dt immunity: 50 V/ns in full temperature range Driver current capability: 4 A source/sink
UM1969 User manual. Getting started with STM32F746G discovery software development tools. Introduction
UM1969 User manual Getting started with STM32F746G discovery software development tools Introduction This document describes the software environment recommendations, required to build an application using
AN3332 Application note
Application note Generating PWM signals using STM8S-DISCOVERY Application overview This application user manual provides a short description of how to use the Timer 2 peripheral (TIM2) to generate three
AN3354 Application note
Application note STM32F105/107 in-application programming using a USB host 1 Introduction An important requirement for most Flash-memory-based systems is the ability to update firmware installed in the
UM1790 User manual. Getting started with STM32L053 discovery kit software development tools. Introduction
User manual Getting started with STM32L053 discovery kit software development tools Introduction This document describes the software environment recommendations required to build an application using
AN4108 Application note
Application note How to set up a HTTPS server for In-Home display with HTTPS Introduction This application note describes how to configure a simple SSL web server using the EasyPHP free application to
STEVAL-IEG001V2. Smart real-time vehicle tracking system. Features
Smart real-time vehicle tracking system Data brief Features Real-time vehicle tracking through GPS/GSM/GPRS. Vehicle location coordinates acquired using a Telit GPS module and sent over GPRS to web server-based
32F769IDISCOVERY. Discovery kit with STM32F769NI MCU. Features
Discovery kit with STM32F769NI MCU Data brief Features STM32F769NIH6 microcontroller featuring 2 Mbytes of Flash memory and 512+16+4 Kbytes of RAM, in BGA216 package On-board ST-LINK/V2-1 supporting USB
STM32F4DISCOVERY. Discovery kit with STM32F407VG MCU. Features. Description
Discovery kit with STM32F407VG MCU Data brief Features STM32F407VGT6 microcontroller featuring 32-bit ARM Cortex -M4 with FPU core, 1-Mbyte Flash memory, 192-Kbyte RAM in an LQFP100 package On-board ST-LINK/V2
AN4128 Application note
Application note Demonstration board for Bluetooth module class 1 SBT2632C1A.AT2 Introduction This document describes the STEVAL-SPBT4ATV3 demonstration board (dongle) for the Bluetooth class 1 SPBT2632C1A.AT2
STIEC45-xxAS, STIEC45-xxACS
Transil TVS for IEC 61000-4-5 compliance Datasheet - production data differential mode MIL STD 883G, method 3015-7 Class 3B 25 kv HBM (human body model) Resin meets UL 94, V0 MIL-STD-750, method 2026 solderability
Getting started with DfuSe USB device firmware upgrade STMicroelectronics extension
User manual Getting started with DfuSe USB device firmware upgrade STMicroelectronics extension Introduction This document describes the demonstration user interface that was developed to illustrate use
SPC5-CRYP-LIB. SPC5 Software Cryptography Library. Description. Features. SHA-512 Random engine based on DRBG-AES-128
SPC5 Software Cryptography Library Data brief SHA-512 Random engine based on DRBG-AES-128 RSA signature functions with PKCS#1v1.5 ECC (Elliptic Curve Cryptography): Key generation Scalar multiplication
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at www.hest ore.hu.
EN: This Datasheet is presented by the m anufacturer. Please v isit our website for pricing and availability at www.hest ore.hu. 2N3055, MJ2955 Complementary power transistors Features Datasheet - production
BD238. Low voltage PNP power transistor. Features. Applications. Description. Low saturation voltage PNP transistor
Low voltage PNP power transistor Features Low saturation voltage PNP transistor Applications Audio, power linear and switching applications Description The device is manufactured in planar technology with
BD241A BD241C. NPN power transistors. Features. Applications. Description. NPN transistors. Audio, general purpose switching and amplifier transistors
BD241A BD241C NPN power transistors Features. NPN transistors Applications Audio, general purpose switching and amplifier transistors Description The devices are manufactured in Planar technology with
UM1680 User manual. Getting started with STM32F429 Discovery software development tools. Introduction
User manual Getting started with STM32F429 Discovery software development tools Introduction This document describes the software environment and development recommendations required to build an application
Features. Description. Table 1. Device summary. Order code Marking Package Packing. STP110N8F6 110N8F6 TO-220 Tube
N-channel 80 V, 0.0056 Ω typ.,110 A, STripFET F6 Power MOSFET in a TO-220 package Features Datasheet - production data Order code V DS R DS(on)max I D P TOT TAB STP110N8F6 80 V 0.0065 Ω 110 A 200 W TO-220
STPS5L60. Power Schottky rectifier. Description. Features
Power Schottky rectifier Datasheet - production data Description Power Schottky rectifier suited for switch mode power supplies and high frequency inverters. This device is intended for use in low voltage
DDSL01. Secondary protection for DSL lines. Features. Description
Secondary protection for DSL lines Features Stand off voltage: 30 V Surge capability: I pp = 30 A 8/20 µs Low capacitance device: 4.5 pf at 2 V RoHS package Low leakage current: 0.5 µa at 25 C 3 2 Description
Table 1. Absolute maximum ratings (T amb = 25 C) Symbol Parameter Value Unit. ISO 10605 - C = 330 pf, R = 330 Ω : Contact discharge Air discharge
Automotive dual-line Transil, transient voltage suppressor (TVS) for CAN bus Datasheet - production data Complies with the following standards ISO 10605 - C = 150 pf, R = 330 Ω : 30 kv (air discharge)
AN3998 Application note
Application note PDM audio software decoding on STM32 microcontrollers 1 Introduction This application note presents the algorithms and architecture of an optimized software implementation for PDM signal
ULN2801A, ULN2802A, ULN2803A, ULN2804A
ULN2801A, ULN2802A, ULN2803A, ULN2804A Eight Darlington array Datasheet production data Features Eight Darlington transistors with common emitters Output current to 500 ma Output voltage to 50 V Integral
Description SO-8. Table 1. Device summary. Order codes. SO-8 (tape and reel) TO-92 (Bag) TO-92 (Ammopack) TO-92 (tape and reel)
Low current 1.2 to 37 V adjustable voltage regulators Description Datasheet - production data TO-92 SO-8 TO-92 Tape and reel Bag Ammopack Features Outuput voltage range: 1.2 to 37 V Output current up to
Android Driver s App Update Version 1.89 Samsung Galaxy Tab 4
Android Driver s App Update Version 1.89 Samsung Galaxy Tab 4 August 2015 COPYRIGHT NOTICE This is an unpublished work protected by the United States copyright laws and is proprietary to Teletrac, Inc.
AN2680 Application note
Application note Fan speed controller based on STDS75 or STLM75 digital temperature sensor and ST72651AR6 MCU Introduction This application note describes the method of defining the system for regulating
AN3265 Application note
Application note Handling hardware and software failures with the STM8S-DISCOVERY Application overview This application is based on the STM8S-DISCOVERY. It demonstrates how to use the STM8S window watchdog
LM337. Three-terminal adjustable negative voltage regulators. Features. Description
Three-terminal adjustable negative voltage regulators Datasheet - production data current limit, thermal overload protection and safe area protection. All overload protection circuitry remains fully functional
AN2604 Application note
AN2604 Application note STM32F101xx and STM32F103xx RTC calibration Introduction The real-time clock (RTC) precision is a requirement in most embedded applications, but due to external environment temperature
TN0023 Technical note
Technical note Discontinuous flyback transformer description and design parameters Introduction The following is a general description and basic design procedure for a discontinuous flyback transformer.
STLQ015. 150 ma, ultra low quiescent current linear voltage regulator. Description. Features. Application
150 ma, ultra low quiescent current linear voltage regulator Description Datasheet - production data Features SOT23-5L Input voltage from 1.5 to 5.5 V Very low quiescent current: 1.0 µa (typ.) at no load
ST13005. High voltage fast-switching NPN power transistor. Features. Applications. Description
High voltage fast-switching NPN power transistor Datasheet production data Features Low spread of dynamic parameters Minimum lot-to-lot spread for reliable operation Very high switching speed Applications
How To Write To An Eeprom Memory On A Flash Memory On An Iphone Or Ipro Memory On Microsoft Flash Memory (Eeprom) On A Microsoft Microsoft Powerbook (Ai) 2.2.2
Application note EEPROM emulation in STM32F10x microcontrollers Introduction Many applications require EEPROM (electrically erasable programmable read-only memory) for non-volatile data storage. For low-cost
BD135 - BD136 BD139 - BD140
BD135 - BD136 BD139 - BD140 Complementary low voltage transistor Features Products are pre-selected in DC current gain Application General purpose Description These epitaxial planar transistors are mounted
TS555. Low-power single CMOS timer. Description. Features. The TS555 is a single CMOS timer with very low consumption:
Low-power single CMOS timer Description Datasheet - production data The TS555 is a single CMOS timer with very low consumption: Features SO8 (plastic micropackage) Pin connections (top view) (I cc(typ)
UM0985 User manual. Developing your STM32VLDISCOVERY application using the IAR Embedded Workbench software. Introduction
User manual Developing your STM32VLDISCOVERY application using the IAR Embedded Workbench software Introduction This document provides an introduction on how to use IAR Embedded Workbench for ARM software
AN4156 Application note
Application note Hardware abstraction layer for Android Introduction This application note provides guidelines for successfully integrating STMicroelectronics sensors (accelerometer, magnetometer, gyroscope
2STBN15D100. Low voltage NPN power Darlington transistor. Features. Application. Description
Low voltage NPN power Darlington transistor Features Good h FE linearity High f T frequency Monolithic Darlington configuration with integrated antiparallel collector-emitter diode TAB Application Linear
AN3110 Application note
Application note Using the STVM100 to automatically adjust VCOM voltage in e-paper Introduction The widespread use of multimedia electronic devices, coupled with environmental concerns over the manufacturing
STTH1R04-Y. Automotive ultrafast recovery diode. Features. Description
Automotive ultrafast recovery diode Features Datasheet - production data K SMA STTH1R4AY Table 1. Device summary Symbol Value I F(AV) 1 A V RRM 4 V T j (max) 175 C V F (typ) t rr (typ) A K.9 V 14 ns A
AN3155 Application note
Application note USART protocol used in the STM32 bootloader Introduction This application note describes the USART protocol used in the STM32 microcontroller bootloader. It details each supported command.
Description. Table 1. Device summary
2 A positive voltage regulator IC Description Datasheet - production data Features TO-220 Output current up to 2 A Output voltages of 5; 7.5; 9; 10; 12; 15; 18; 24 V Thermal protection Short circuit protection
AN2389 Application note
Application note An MCU-based low cost non-inverting buck-boost converter for battery chargers Introduction As the demand for rechargeable batteries increases, so does the demand for battery chargers.
Description. IO and RF AGC. ASIC controller and power management. Carrier recovery loop. GPIO switch matrix. Lock indicator and monitoring DVBS2 FEC
Multi-standard advanced demodulator for satellite digital TV and data services set-top boxes Data Brief Features Demodulation DIRECTV TM and DVBS QPSK DVBS2 QPSK and 8PSK Digital Nyquist root filter with
EVL185W-LEDTV. 185 W power supply with PFC and standby supply for LED TV based on the L6564, L6599A and Viper27L. Features.
Features 185 W power supply with PFC and standby supply for LED TV based on the L6564, L6599A and Viper27L Data brief Universal input mains range: 90 264 Vac - frequency 45 65 Hz Output voltage 1: 130
50 ohm nominal input / conjugate match balun to nrf51822- CEAA/CDAB/CFAC and nrf51422-ceaa/cdab/cfac. Benefits. Description
50 ohm nominal input / conjugate match balun to nrf51822- /CDAB/CFAC and nrf51422-/cdab/cfac Datasheet production data Benefits Very low profile: < 560 µm after reflow High RF performance RF BOM and area
AN4296 Application note
Application note Overview and tips for using STM32F303/328/334/358xx CCM RAM with IAR EWARM, Keil MDK-ARM and GNU-based toolchains Introduction The purpose of this application note is to give a presentation
LM217M, LM317M. Medium current 1.2 to 37 V adjustable voltage regulator. Description. Features
Medium current 1.2 to 37 V adjustable voltage regulator Datasheet - production data Description The LM217M and LM317M are monolithic integrated circuits in DPAK package used as positive adjustable voltage
UA741. General-purpose single operational amplifier. Features. Applications. Description. N DIP8 (plastic package)
General-purpose single operational amplifier Datasheet - production data N DIP8 (plastic package) D SO8 (plastic micropackage) Pin connections (top view) 1 - Offset null 1 2 - Inverting input 3 - Non-inverting
AN2824 Application note
Application note STM32F10xxx I 2 C optimized examples Introduction The aim of this application note is to provide I 2 C firmware optimized examples based on polling, interrupts and DMA, covering the four
Description. Table 1. Device summary. Order codes. TO-220 (single gauge) TO-220 (double gauge) D²PAK (tape and reel) TO-220FP
1.2 V to 37 V adjustable voltage regulators Description Datasheet - production data TO-220 TO-220FP The LM217, LM317 are monolithic integrated circuits in TO-220, TO-220FP and D²PAK packages intended for
Description. Table 1. Device summary. Order code Temperature range Package Packaging Marking
14-stage ripple carry binary counter/divider and oscillator Applications Automotive Industrial Computer Consumer Description Datasheet - production data Features Medium speed operation Common reset Fully
UM1613 User manual. 16-pin smartcard interface ST8034P demonstration board. Introduction
User manual 16-pin smartcard interface ST8034P demonstration board Introduction The purpose of this document is to describe, and provide information on, how to efficiently use the ST8034P smartcard interface
STN3NF06L. N-channel 60 V, 0.07 Ω, 4 A, SOT-223 STripFET II Power MOSFET. Features. Application. Description
N-channel 60 V, 0.07 Ω, 4 A, SOT-223 STripFET II Power MOSFET Features Type V DSS (@Tjmax) Exceptional dv/dt capability Avalanche rugged technology 100% avalanche tested R DS(on) max STN3NF06L 60 V < 0.1
DSL01-xxxSC5. Secondary protection for DSL lines. Features. Description. Applications. Benefits. Complies with the following standards
-xxxsc5 Secondary protection for DSL lines Features Low capacitance devices: -xxxsc5: Delta C typ = 3.5 pf High surge capability: 30 A - 8/20 µs Voltage: 8 V, 10.5 V, 16 V, and 24 V RoHS package Benefits
SDLS068A DECEMBER 1972 REVISED OCTOBER 2001. Copyright 2001, Texas Instruments Incorporated
SN54174, SN54175, SN54LS174, SN54LS175, SN54S174, SN54S175, SN74174, SN74175, SN74LS174, SN74LS175, SN74S174, SN74S175 PRODUCTION DATA information is current as of publication date. Products conform to
Order code Temperature range Package Packaging
ST485B ST485C Low power RS-485/RS-422 transceiver Features Low quiescent current: 300 µa Designed for RS-485 interface application - 7 V to 12 V common mode input voltage range Driver maintains high impedance
Trench gate field-stop IGBT, M series 650 V, 10 A low loss. Features. Description
Trench gate field-stop IGBT, M series 650 V, 10 A low loss Datasheet - production data TAB D2PAK 1 3 Features 6 µs of short-circuit withstand time VCE(sat) = 1.55 V (typ.) @ IC = 10 A Tight parameter distribution
STTH110. High voltage ultrafast rectifier. Description. Features
High voltage ultrafast rectifier Datasheet - production data K Description The STTH110, which is using ST ultrafast high voltage planar technology, is especially suited for free-wheeling, clamping, snubbering,
STWD100. Watchdog timer circuit. Description. Features. Applications
Watchdog timer circuit Description Datasheet - production data SOT23-5 (WY) Features SC70-5, SOT323-5 (W8) Current consumption 13 µa typ. Available watchdog timeout periods are 3.4 ms, 6.3 ms, 102 ms,
AN3353 Application note
Application note IEC 61000-4-2 standard testing Introduction This Application note is addressed to technical engineers and designers to explain how STMicroelectronics protection devices are tested according
AN3252 Application note
Application note Building a wave generator using STM8L-DISCOVERY Application overview This application note provides a short description of how to use the STM8L-DISCOVERY as a basic wave generator for
AN4368 Application note
Application note Signal conditioning for pyroelectric passive infrared (PIR) sensors Sylvain Colliard-Piraud Introduction Pyroelectric passive infrared (PIR) sensors are widely used in daily life. They
STP60NF06. N-channel 60V - 0.014Ω - 60A TO-220 STripFET II Power MOSFET. General features. Description. Internal schematic diagram.
N-channel 60V - 0.014Ω - 60A TO-220 STripFET II Power MOSFET General features Type V DSS R DS(on) I D STP60NF06 60V
ETP01-xx21. Protection for Ethernet lines. Features. Description. Applications. Benefits. Complies with the following standards
ETP0-xx2 Protection for Ethernet lines Features Differential and common mode protection Telcordia GR089 Intrabuilding: 50 A, 2/0 µs ITU-T K20/2: 40 A, 5/30 µs Low capacitance: 3 pf max at 0 V UL94 V0 approved
MC34063AB, MC34063AC, MC34063EB, MC34063EC
MC34063AB, MC34063AC, MC34063EB, MC34063EC DC-DC converter control circuits Description Datasheet - production data Features DIP-8 SO-8 Output switch current in excess of 1.5 A 2 % reference accuracy Low
Description SO-8. series. Furthermore, in the 8-pin configuration Very low-dropout voltage (0.2 V typ.)
ery low-dropout voltage regulator with inhibit function TO-92 Bag TO-92 Tape and reel Ammopack 1 2 3 SO-8 Description Datasheet - production data The is a very low-dropout voltage regulator available in
TDA2003 10W CAR RADIO AUDIO AMPLIFIER
TDA2003 10W CAR RADIO AUDIO AMPLIFIER DESCRIPTION The TDA 2003 has improved performance with the same pin configuration as the TDA 2002. The additional features of TDA 2002, very low number of external
STP60NF06FP. N-channel 60V - 0.014Ω - 30A TO-220FP STripFET II Power MOSFET. General features. Description. Internal schematic diagram.
N-channel 60V - 0.014Ω - 30A TO-220FP STripFET II Power MOSFET General features Type V DSS R DS(on) I D STP60NF06FP 60V
ST19NP18-TPM-I2C. Trusted Platform Module (TPM) with I²C Interface. Features
Trusted Platform Module (TPM) with I²C Interface Data brief Features Single-chip Trusted Platform Module (TPM) Embedded TPM 1.2 firmware I²C communication interface (Slave mode) Architecture based on ST19N
Intel HTML5 Development Environment. Tutorial Building an Apple ios* Application Binary
Intel HTML5 Development Environment Tutorial Building an Apple ios* Application Binary V1.02 : 08.08.2013 Legal Information INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH INTEL PRODUCTS. NO
LM135-LM235-LM335. Precision temperature sensors. Features. Description
Precision temperature sensors Features Directly calibrated in K 1 C initial accuracy Operates from 450µA to 5mA Less than 1Ω dynamic impedance TO-92 (Plastic package) Description The LM135, LM235, LM335
AN2557 Application note
Application note STM32F10x in-application programming using the USART Introduction An important requirement for most Flash-memory-based systems is the ability to update firmware when installed in the end
BZW50. Transil, transient voltage surge suppressor (TVS) Features. Description
Transil, transient voltage surge suppressor (TVS) Datasheet production data Features Peak pulse power: 5000 W (10/0 µs) Stand-off voltage range from 10 V to 180 V Unidirectional and bidirectional types
LM134-LM234-LM334. Three terminal adjustable current sources. Features. Description
Three terminal adjustable current sources Features Operates from 1V to 40V 0.02%/V current regulation Programmable from 1µA to 10mA ±3% initial accuracy Description The LM134/LM234/LM334 are 3-terminal
AN3990 Application note
Application note Upgrading STM32F4DISCOVERY board firmware using a USB key Introduction An important requirement for most Flash memory-based systems is the ability to update the firmware installed in the
SEO Meta Templates. Magento Extension. User Guide. SEO Meta Templates
Magento Extension User Guide Important Notice MageWorx reserves the right to make corrections, modifications, enhancements, improvements, and other changes to all its products and services at any time
ULN2001, ULN2002 ULN2003, ULN2004
ULN2001, ULN2002 ULN2003, ULN2004 Seven Darlington array Datasheet production data Features Seven Darlingtons per package Output current 500 ma per driver (600 ma peak) Output voltage 50 V Integrated suppression
STP55NF06L STB55NF06L - STB55NF06L-1
General features STP55NF06L STB55NF06L - STB55NF06L-1 N-channel 60V - 0.014Ω - 55A TO-220/D 2 PAK/I 2 PAK STripFET II Power MOSFET Type V DSS R DS(on) I D STP55NF06L 60V
Obsolete Product(s) - Obsolete Product(s)
Vertical deflection booster for 3 App TV/monitor applications with 0 V flyback generator Features Figure. Heptawatt package Power amplifier Flyback generator Stand-by control Output current up to 3.0 App
MC33079. Low noise quad operational amplifier. Features. Description
Low noise quad operational amplifier Datasheet production data Features Low voltage noise: 4.5 nv/ Hz High gain bandwidth product: 15 MHz High slew rate: 7 V/µs Low distortion: 0.002% Large output voltage
HANDS-FREE BLUETOOTH CONTROLLER for SMART READY TABLETS AND COMPUTERS
HANDS-FREE BLUETOOTH CONTROLLER for SMART READY TABLETS AND COMPUTERS Operating Manual 2 CONTENTS Before Turning on Your PED... 4 Power... 5 ON... 5 OFF... 5 Modes... 6 Changing the MODE... 7 Connecting
L78L. Positive voltage regulators. Description. Features
Positive voltage regulators Datasheet - production data Features Output current up to 100 ma Output voltages of 3.3; 5; 6; 8; 9; 10; 12; 15; 18; 24 V thermal overload protection Short-circuit protection
UM0462 User manual. STM32 and STM8 Flash loader demonstrator. Introduction
User manual STM32 and STM8 Flash loader demonstrator Introduction The purpose of this document is to describe the STMicroelectronics STM32 and STM8 Flash loader demonstrator application that was developed
User manual. Your best protection against theft and loss. (Android) Made for
User manual Made for Your best protection against theft and loss (Android) Warranty SCOPE OF THE WARRANTY Subject to legal provisions, the responsibility of SECU4 under this warranty is limited to the
L78MxxAB L78MxxAC. Precision 500 ma regulators. Features. Description
L78MxxAB L78MxxAC Precision 500 ma regulators Features Output current to 0.5 A Output voltages of 5; 6; 8; 9; 10; 12; 15; 18; 24 V Thermal overload protection Short circuit protection Output transition
L6234. Three phase motor driver. Features. Description
Three phase motor driver Features Supply voltage from 7 to 52 V 5 A peak current R DSon 0.3 Ω typ. value at 25 C Cross conduction protection TTL compatible driver Operating frequency up to 150 khz Thermal
AN3270 Application note
Application note Using the STM8L16x AES hardware accelerator Introduction The purpose of cryptography is to protect sensitive data to avoid it being read by unauthorized persons. There are many algorithms
MiniPOS and BluePad-50 user manual
MiniPOS and BluePad-50 user manual Welcome to MiniPOS application for mobile and card payments! +386 (30) 70 4444 +386 (30) 70 5555 sales@intech.si www.paywiser.si Slovenska ulica 54 Ljubljana, Slovenija
STTH2R06. High efficiency ultrafast diode. Features. Description
STTH2R6 High efficiency ultrafast diode Features Very low conduction losses Negligible switching losses Low forward and reverse recovery times High junction temperature Description A K The STTH2R6 uses