DIA Survey Requirements. Thomas Breitnauer, PLS DIA Land Surveyor December 10, 2014

Transcription

1 DIA Survey Requirements Thomas Breitnauer, PLS DIA Land Surveyor December 10, 2014

2 Survey Requirements - During Pre-Construction meeting - Contractor should receive a survey packet with template for: - Survey Statement of Work (SSOW) - Survey and Quality Control Plan (SQCP) - Weekly Project Status Report - Final Project Report - It would be fitting for the Contractor to submit the SSOW and the SQCP for their project prior to the Pre-Survey meeting. - The DIA Survey Section needs to review and approve. - This process could take approximately a week or more.

3 Pre-Survey Meeting No survey work can commence until the SSOW and the SQCP is approved. Best to be completed prior to the Pre-Survey Meeting. During this meeting, the DIA Survey Section will provide all necessary data. NGS datasheets. (Do not retrieve them from NGS website) Current projection parameters. Coordinate list. Map of the points.

4 Control Network Contractor set their control network for their project Submit all field notes, raw files and reports to the DIA Survey Section for review. Raw files must be read by Trimble Business Office (TBC). Reports must be in MS Word or MS Excel format Control Network must have DIA Survey Sections approval before any survey work can begin.

5 Questions? Questions?

6 DIA Survey Requirements Thomas Breitnauer, PLS DIA Land Surveyor December 10, 2014

7 AIM Asset Management, BIM & Survey Requirements Brendan Dillon BIM Manager December 10 th, 2014

8 AIM Asset Management Group Research and Analytics MAXIMO Administration Maintenance Planning AIM Asset Management Building Information Modeling Programs

9 What is BIM? Building Information Modeling (BIM) is a digital representation of physical and functional characteristics of a facility. A BIM is a shared knowledge resource for information about a facility forming a reliable basis for decisions during its life-cycle; defined as existing from earliest conception to demolition. - USNBIMS BIM is an approach to design, construction and facilities management that makes the information generated at each step more usable and accessible at every other step.

10 What does BIM at DIA mean? All design work is to be delivered to DIA in an.rvt format for work and as Civil 3D generated.dwgs for horizontal/civil work. Contractors follow a VDC (Virtual Design & Construction) process for laying out and planning their construction path. Commissioning of all DIA systems designated as Assets is required. DIA uses the final Reconciled Model to feed into our BIM database. BIM database connects to our GIS and Maximo Asset Management systems. BIM database is in a neutral SQL database, enabling it to connect to a number of other systems for future uses such as our condition assessment program, commercial tenant management, and other programs When a new project occurs in an area with existing BIM work, the team will have better information on existing conditions than previously available.

11 Integration with Maximo Jet-Bridge Conditions Assessment

12 BIM Software 3 Software Platforms Autodesk Revit Buildings and building systems Autodesk AutoCAD Civil 3D Site and site utilities Autodesk Navisworks Used for Spatial Coordination & Clash Detection

13 Software - Revit - About Modeling instead of drafting Live schedules reflect actual counts, lengths, areas and volumes of elements, rooms and spaces in the project Change something in one view and it is automatically updated in others. i.e. change door number on plan and it is updated in schedule, move a door in plan, it is reflected in elevation and sections

14 Software - Revit - About 4 Versions Architecture MEP Structure Revit - Three Previous in One Not Backwards Compatible Cannot open a Revit 2014 file in Revit Once you open a Revit 2013 file in 2014, it becomes a 2014 file permanently DIA Upgrades versions first quarter each year

15 Software - Civil 3D - About Surface and Site Utility modeling Very similar to standard AutoCAD using Object Based Data Tables Live schedules reflect actual counts, lengths, areas and volumes of earth, pipe, equipment, etc. Change something in one view and it is automatically updated in others. i.e. change grading on plan and it is updated in schedule

16 Software Spatial Coordination/Clash Detection Navisworks - 3 Versions Freedom - Free viewer. Good for most consultants Simulate - Premium Design Suites. Create/Track Clash Views Manage - Ultimate Design Suites. Automated Clash Detection tools BIM 360 Glue Cloud hosted option for Spatial Coordination/Clash Detection with more advanced tracking features Revit - Spatial Coordination can be done within Revit during Design, though it is not recommended

17 Software Other Recommended Tools SysQue Model Review Add-In BIM 360 Field Bluebeam

18 Hardware Revit Hardware Requirements / Civil 3D Hardware Requirements Windows 7 Multi-Core Intel Pentium, Xeon, or i-series processor or AMD equivalent with SSE2 technology. 4GB RAM 5gb Storage Navisworks - Generally part of Design Suite, any system that runs Revit/Civil 3D will run Navisworks. Glue360 Cloud Based

19 Wetware / Users No hardware or software can compensate for a user knowledge base shortfall, while a knowledgeable user can get around many hardware and software limitations Train existing staff Hire new staff Subconsultant In-House Out-of-House Which approach? ALL!

20 DEMO HTC Model integration

21 Who is Implementing BIM? Denver International Airport USACE / GSA Other Airports Tampa International Airport Cleveland Airport Honolulu LaGuardia University of Colorado Children's Hospital City of Denver BIM adoption will be ubiquitous within 5-10 years for all longterm facility owners

22 Analytics & BIM Deliverables Tracking Every proposal is reviewed for conformance to DIA standards BIM model is evaluated at each deliverable RFI's, Change Orders, Bulletins, etc. tracked All reviews are documented and recorded in our cross referenced database for project and full project team evaluation, including internal DIA performance

23 Questions so far?

24 DSM 12 7 Chapters plus Appendix & Attachments White Papers Coming Soon! Conformance to DSM standards is a requirement for all projects. No exceptions!

25 DSM 12 - Chapter 1 & 2 Chapter 1- Electronic Data Collection and Interchange (EDCI) Compliance Policy References and summary of FAA NextGen and A-GIS requirements 5 pages Chapter 2 - BIM Introduction Overview Organization strategy Implementation PXP Introduction Objectives & Application BIM Process Summary 16 Pages

26 DSM 12 - Chapter 3 & 4 Chapter 3 - Subsurface Utilities Data Standard Requirements for surveying and documenting underground utilities 4 Pages Chapter 4 BPXP Instructions Guidelines for working with the DIA BIM Project Execution Plan 7 Pages

27 DSM 12 - Chapter 5 CADD Procedures Manual Includes Requirements and Procedures Applicable to Civil work only (>5 from building footprint) File management and naming File configuration Layer standards Best practices GIS Data requirements File delivery 88 Pages

28 DSM 12 - Chapter 6 BIM Standards Introduction Project Setup Project File Standards Content Modeling Standards Modeling Requirements Design Modeling Requirements Construction Spatial Coordination R300 Data Commissioning 44 Pages

29 DSM 12 - Chapter 7 Tenant BIM Standards Restaurants, Shops, etc. Design team not typically contracted by DIA, but still required to meet DIA standards. Introduction Project Setup Project File Standards Content Modeling Standards Modeling Requirements Design Modeling Requirements Construction Spatial Coordination 44 Pages

30 BIM Project Execution Plan Project Information Project Processes Data Requirements Collaboration Procedures Model Structure Deliverables

31 Level of Development Matrix Organized by UNIFORMAT II Additional Level 1 Major Group Elements L Airport Equipment Level of Development definitions as defined by BIMForum 2013 LoD Specification Indicates whether a sub-element category is: considered an Asset by DIA Requires Commissioning Requires training for DIA staff Toggle for indicating which sub-element categories are in the scope of that project

32 Level of Development Matrix ~Chapter Summary~

33 DIA Templates & Kit of Parts Updated Annually Always growing Available to everyone, for any project, at DIA or not. 4,000+ Families, not counting system families in Container files

34 Project Process & Deliverables Proposal Award Pre-Design Schematic Design Design Development Construction Documents Bid Phase Construction Phase Commissioning Project Closeout

35 Project Process & Deliverables Proposal Review current DSM Review provided BIM backgrounds, scan and survey information for proposal Award Submit BPXP within 30 days of NTP. DIA will return with comments within 14 days. Submit base model for each discipline to insure each consultant is using correct template and Shared Coordinates Pre-Design Preliminary programmatic spaces modeled

36 Project Process & Deliverables Schematic Design All rooms and spaces placed Model submitted at end of phase for high level review Design Development Needed equipment families should be developed Model submitted at end of phase for high level review

37 Project Process & Deliverables Construction Documents Model submissions at 30, 60, 90 & 100% Modeled elements conform to LoD Matrix New families submitted for review as created Family and model reviews returned within 14 days All rooms/spaces named and placed All equipment modeled Systems (duct, pipe, conduit, etc) modeled to tolerances in DSM

38 Project Process & Deliverables Bid Phase Update BIM Model with Addenda as appropriate Contractors review DSM, BPXP Construction Phase Contractor model created and coordinated Design model updated with RFI s, Change Orders, etc. R300 Model Commissioning Commissioning data integrated into models Project Closeout Construction, Design & Facilities models delivered to DIA

39 Model Review Process & Document Breakdown of requirements Numerical Grading Reference to DSM location Framework to discuss next steps

40 What if......you don't know Revit or Civil 3D well enough to meet DIA's standards? Let s discuss it.

41 Resources DIA Free resource for clarification and guidance, NOT training. Youtube - Free AUGI.com - Autodesk User s Group International - Free Autodesk University - videos available free to Autodesk Subscription holders RoMBIS - Rocky Mountain Building Information Society BoB Tech Boulder Building Technology Group Publications Mastering Autodesk Revit Architecture 2015 Mastering Autodesk Revit MEP 2015 Autodesk Revit Architecture Essentials 2015 Autodesk Revit MEP Essentials 2015 Autodesk Revit Architecture 2015: No Experience Required The Aubin Academy: Revit MEP 2015 Exploring Autodesk Revit Structure 2015

42 AIM Asset Management, BIM & Survey Requirements Brendan Dillon BIM Manager December 10 th, 2014