2015 ESSS CONFERENCE & ANSYS USERS MEETING May 05-07, 2015 Grand Mercure São Paulo Ibirapuera - São Paulo - Brazil

Size: px
Start display at page:

Download "2015 ESSS CONFERENCE & ANSYS USERS MEETING May 05-07, 2015 Grand Mercure São Paulo Ibirapuera - São Paulo - Brazil"

Transcription

1 2015 ESSS CONFERENCE & ANSYS USERS MEETING May 05-07, 2015 Grand Mercure São Paulo Ibirapuera - São Paulo - Brazil PROGRAM Chile Santiago May, 04 Brazil São Paulo May, Argentina Buenos Aires May, Colombia Bogotá May, Peru Lima May, Organization: Sponsors:

2 welcome The ESSS CONFERENCE & ANSYS USERS MEETING is the most traditional discussion forum for users of simulation software applied to product development in South America. During the course of three days, engineers, designers and researchers will have the opportunity to exchange ideas, and experiences in Computer-Aided Engineering (CAE) and to improve their engineering simulation skills through training courses, software updates, plenary sessions, free workshops, user technical presentations, and ask the expert sessions. Join us and find out how innovative companies, universities and R&D centers have been applying engineering simulation software to improve processes and reduce their product development cycle time. Pre-Conference Training Courses Plenary Keynote Speakers Software Update Free Workshops 70+ User Technical Presentations Ask the Expert REGISTRATION Convergence Best Paper Award

3 CONFERENCE AT-A-GLANCE uu May 05 uu May 06 uu May 07 8:00 Registration Open 8:30 TRAINING COURSES 8:00 Registration Open 8:30 SOFTWARE UPDATE 8:00 Registration Open 8:30 SOFTWARE UPDATE 9:10 FREE WORKSHOPS 9:10 FREE WORKSHOPS 10:00 REFRESHMENTS IN EXHIBITION AREA 10:30 TRAINING COURSES 10:00 REFRESHMENTS AND ASK THE EXPERT 10:30 PLENARY SESSION 10:00 REFRESHMENTS AND ASK THE EXPERT 10:30 PLENARY SESSION 12:00 LUNCH 13:00 LUNCH 13:00 LUNCH 14:00 TRAINING COURSES 14:30 technical sessions 14:30 technical sessions 15:30 REFRESHMENTS IN EXHIBITION AREA 16:00 TRAINING COURSES 15:50 REFRESHMENTS AND ASK THE EXPERT 16:20 technical sessions 15:50 REFRESHMENTS AND ASK THE EXPERT 16:20 technical sessions 17:30 end of 1 st day 18:00 technical discussion 18:30 CONFERENCE SOCIAL (COCKTAIL) 18:00 Convergence Best Paper Award AND ESSS ACADEMIC CHALLENGE AWARD

4 PLENARY SESSION uu May 06 Room Plenary Versailles I e II Room Plenary Versailles I e II Barry Christenson - ANSYS, Inc. Director of Product Management PREDICT WITH CONFIDENCE UTILIZING COMPREHENSIVE SOLUTION PRACTICES The product management team is responsible for planning the product capabilities of new releases as well as marketing the capabilities of current products. Barry holds a B.S. in Mechanical Engineering from North Dakota State University, Fargo, North Dakota, and an M.Sc. degree in Mechanical Engineering from Kettering University, Flint, Michigan, USA. Prof. Dr. Arismar Cerqueira Sodré Junior - National Institute of Telecommunications (INATEL) Professor THE WORLD IS WIRELESS: R&D PROJECTS ON ANTENNAS AND RADARS Prof. Dr. Arismar Cerqueira received his B.Sc. degree in Electrical Engineering from the Federal University of Bahia, an M.Sc. degree from UNICAMP, and a Ph.D. from Scuola Superiore Sant Anna, Italy. He is currently an Associate Professor at the Brazilian National Institute of Telecommunications (INATEL). He currently holds 4 international patents and has transferred 10 products to the industry. He has also published 114 scientific papers in international journals or conference proceedings. Flávio Antoun Netto - Brazilian Navy Superintendence of Submarine Design - Navy Commander THE NUCLEAR SUBMARINE PROGRAM AND THE OPPORTUNITY TO IMPROVE TECHNOLOGIES IN BRAZIL Netto is the Head of Structures Department, Superintendence of Submarine Design, at the Brazilian Navy Technological Center in São Paulo (CTMSP), Brazil. He completed his undergraduate education in Mechanical Engineering (1989) at the Federal Center of Technological Education, and postgraduate studies at the Military Engineering Institute and Federal University of Rio de Janeiro, leading to an M.Sc. degree in Mechanical Engineering (1992) and Ph.D degree in Ocean Engineering (1999), respectively.

5 PLENARY SESSION uu May 07 Room Plenary Versailles I e II Room Plenary Versailles I e II Gilvan Prada Rossi - General Motors Project Manager Juliano Cavalcanti - Embraer Product Development Engineer DEVELOPING VEHICLES USING SIMULATION AT GENERAL MOTORS BRAZIL THE MULTIDISCIPLINARY DESIGN OPTIMIZATION EXPERIENCE AT EMBRAER Gilvan Prada Rossi holds degree in Mechanical Engineering with emphasis on Automobiles from FEI University Center - São Bernardo do Campo, and an M.Sc. degree in Mechanical Engineering from USP. He worked at General Motors as a CAE engineer in the areas of Structure, Durability and Vehicle Safety, and is currently the CAE manager responsible for the areas of Aerodynamics, HVAC and Closures. He has degree in Engineering Control and Automation from PUC - Rio, Brazil, and an M.Sc. degree in Aeronautical Engineering from ITA. He joined Embraer in 2005, where he worked for five years on an MDO project in technological development. He later joined the KC-390 project in the area of aerodynamics. He also participated in the project on the new wing tip of the ERJ-175Plus. Rodrigo Tasca - ESSS Account Manager LEVERAGE PARAMETRIC BENEFITS OF ANSYS PLATFORM Rodrigo Tasca has degree in Mechanical Engineering from the Federal University of Santa Catarina with a strong focus on Computational Fluid Dynamics. Tasca has been with ESSS for 15 years, where he started in the Technical Team with Support and Services, and was promoted to Technical Team Manager and later to Account Manager. He is currently the Manager of the Account Management Division, where he coordinates Customer Assessment and Account Planning activities.

6 training courses Room Lorangerie I Lorangerie II Chambord Versaile II 8:30-17:30 Fracture Mechanics - Fundamentals and ANSYS 16 New Features Key Aspects of the Finite Volume Method for CFD Multiphase Flow Modeling Using ANSYS CFD ANSYS SpaceClaim Direct Modeler Topics: 1. Introduction to fracture mechanics: Definition; Why do structures fail?; History and brief overview; References. 2. Linear elastic fracture mechanics G: Energy Release Rate; Stress intensity factors; Fracture Thoughness. 3. Elasto-plastic mechanics fracture J-Integral; ANSYS Workbench tutorial examples. 4. Overview on capabilities for damage assessment with ANSYS for composite materials: CZM: Cohesive zone modeling; VCCT: Virtual crack closing techinque; ANSYS Workbench tutorial examples. 5. Fracture Mechanics: What s new in ANSYS R16: Inclined crack meshing; Unstructured Mesh Method (UMM); C* Integral Calculation; Material Force: a novel approach; XFEM: extended Finite Element Method. Instructor: Eduardo Francisco Rocha de Araujo, ESSS Schedule: May 05, 2015 Lenght: 8 hours Fee: R$ 500,00 (20% discount for students and 60% for authors of approved papers). Topics: 1. Physical motivation for using Finite Volume Methods. 2. The evolution of the numerical simulation for fluid flows. 3. The evolution of the numerical methods for fluid flows: Variables arrangements in the grid - staggered and co-located. 4. Control volume construction for unstructured grids, cell center and cell vertex methods: The traditional cell center method for unstructured grids; Polyhedrical grids - Comparisons. 5. Local coordinate transformation. 6. Integration of the conservation equations. 7. Interpolation functions: spatial and temporal. 8. Segregated and coupled methods. 9. Solution of the linear system. 10. Application of the concepts to the ANSYS tools. Instructor: Prof. Clovis Maliska, UFSC / Fábio Yukio Kurokawa, ESSS Schedule: May 05, 2015 Lenght: 8 hours Fee: R$ 500,00 (20% discount for students and 60% for authors of approved papers). Topics: 1. Comparing multiphase and multicomponent flow. 2. Classifying multiphase flows: Disperse-continuous flows; Continuous-continuous flows. 3. Understanding flow regimes. 4. Multiphase Models: Eulerian multiphase flow simulation: Homogeneous model and Mixture model; Eulerian-Lagrange. 5. Special Topics: Good practices in cyclone studies; Numerical methodology for modeling sprays Instructor: Karolline Ropelato, ESSS Schedule: May 05, 2015 Lenght: 8 hours Fee: R$ 500,00 (20% discount for students and 60% for authors of approved papers). Topics: 1. Introduction to SpaceClaim: A brief introduction to the SpaceClaim User- Interface; Basic Selection techniques used in SpaceClaim; The basics of creating a sketch; Learn the fundamentals of creating and editing geometry with the Pull tool; Learn how to translate and rotate items; One simple tool to simplify and defeature geometry; Quick overview on boolean operations such as split and merge; SpaceClaim Model Preparation; Quick overview on how to create parameters and work with them. 2. Geometry reconstruction: Quickly create complex solids from scratch; Sketch curves along the facets of an STL file; Adjust a model s geometry; Convert 2D models or STL files into 3D models. Instructor: Roman Walsh, ANSYS, Inc. Schedule: May 05, 2015 Lenght: 8 hours Fee: R$ 500,00 (20% discount for students and 60% for authors of approved papers).

7 training courses Room Malmaison Room Blois Room Blois 8:30-17:30 Engineering Design Optimization based on Response Surface: Theory and Applications 8:30-12:30 Workshop Introduction to ANSYS HFSS 13:30-17:30 Workshop Introduction to Maxwell / Simplorer Coupling Topics: 1. Introduction: Based Concepts behind Otimization; Optimality Conditions. 2. Introduction to Response Surface Method: Data approximation concepts Simple Linear Regression; Introduction to Design of Experiments. 3. Advanced Response Surfaces techniques: Multivariate linear regression; Radial Basis Function; Artificial Neural Network; Metrics to select RSM models. 4. Optimization Techniques: Gradient Based Methods; Genetic Algorithms. 5. Applications: Solving engineering problems using an optimization tool. Topics: 1. Overview of Technologies in ANSYS HFSS. 2. New Features of R Comparison Between Measurements and ANSYS HFSS Results 4. Signal and Power Integrity Example on Package and Print Circuit Boar 5. Examples on how to use Hybrid Solvers for Antenna Design and Placement Investigation: Instructor: Juliano Fujioka Mologni, ESSS Schedule: May 05, 2015 Lenght: 4 hours Fee: R$ 250,00 (20% discount for students and 60% for authors of approved papers). Topics: 1. Introduction to Simplorer and basic usage: System level modeling; Basic usage. 2. Co-simulation between Maxwell and Simplorer: 3 phase Synchronous machine coupled with drive system. 3. Using electrical machines reduced order models obtained from Maxwell and RMxprt. Instructor: Anderson Santos Nunes, ESSS Schedule: May 05, 2015 Lenght: 4 hours Fee: R$ 250,00 (20% discount for students and 60% for authors of approved papers). Instructor: Guilherme Jenovencio, ESSS Schedule: May 05, 2015 Lenght: 8 hours Fee: R$ 500,00 (20% discount for students and 60% for authors of approved papers).

8 SOFTWARE UPDATES uu May 06 Room Lorangerie I Lorangerie II Malmaison Chambord 8:30 - ANSYS Structural Mechanics ANSYS Fluid Dynamics ANSYS Electromagnetics Rocky DEM Particle Simulator 9:10 Barry Christenson ANSYS, Inc. John Stokes ANSYS, Inc. Juliano Fujioka Mologni ESSS Rahul Bharadwaj ROCKY DEM uu May 07 Room Lorangerie I Lorangerie II Malmaison 8:30 - ANSYS Workbench and AIM ANSYS SpaceClaim modefrontier 9:10 Barry Christenson ANSYS, Inc. Roman Walsh ANSYS, Inc. Brayan Paredes ESSS

9 FREE WORKSHOPS uu May 06 Room Lorangerie I Lorangerie II Malmaison Chambord 9:10-9:35 ANSYS Structural Mechanics: Workflow Enhancements in ANSYS Workbench 16 ANSYS Fluid Dynamics: Combustion Modeling ANSYS Electromagnetics HF: HFSS 3D Layout for Antennas and Signal Integrity ROCKY: ROCKY and ANSYS Coupling Instructor: Pedro Cheroto, ESSS Instructor: Raphael Bacchi, ESSS Instructor: Juliano Fujioka Mologni, ESSS Instructor: Nicolas Spogis, ESSS 9:35-10:00 ANSYS Structural Mechanics: Nonlinear Adaptative Remeshing ANSYS Fluid Dynamics: Geometric Optimization with Adjoint Solver ANSYS Electromagnetics LF: Electromagnetics/Thermal Coupling to model Rotating Electrical Machines Instructor: Roberto Silva, ESSS Instructor: Leon White Nogueira, ESSS Instructor: Anderson Santos Nunes, ESSS uu May 07 Room Lorangerie I Lorangerie II Malmaison ANSYS AIM: Integrated Multiphysics Simulation ANSYS SpaceClaim: Beam and shell models preparation using SpaceClaim 9:10-9:35 Instructor: Armando Souza, ESSS Instructor: Roman Walsh, ANSYS, Inc. modefrontier: How to simplify and reuse modefrontier workflows using processmodeler Instructor: Brayan Paredes, ESSS 9:35-10:00 ANSYS ACT: Customization based on ACT ANSYS HPC from Desktop to Cloud modefrontier: How to monitor design evaluations in the new run analysis environment inside modefrontier Instructor: Luiz Lima, ESSS Instructor: Derek Powell, ANSYS, Inc. Vinicius Strugata, ESSS Instructor: Brayan Paredes, ESSS

10 USER TECHNICAL SESSIONS uu May 06 Room Lorangerie I Lorangerie II Malmaison Chambord Structural Mechanics Fluid Dynamics Electromagnetics Fluid Dynamics Chairman Pedro Cheroto Karolline Ropelato Juliano Mologni Raphael David 14:30 Explicit-Implicit Analysis Integration for Structural Assessment of a Sheet Metal Forming Rafael Vetturazzi - ESSS Spray Combustion in Rocket Engines Saulo Gomez - ITA Simulation of a Corrugated Conical Horn Antenna With Wide Beamwidth in 60 GHz Carlos Eduardo Orihuela Vargas - PUC-RJ CFD Assisted Offshore Helideck Design Daniel Fonseca de Carvalho e Silva - PETROBRAS 14:50 Explicit Dynamics Simulation of Long Sheet Forming for Flexible Pipe Application Luiz Lima - Technip Thermal Analysis of the Brazilian 14-X Hypersonic Aerospace Vehicle at Mach Number 10 Felipe Jean da Costa - ITA Method for Permittivity Measurement Without the Measuring Equipment Flavio Augusto Franco Ferreira - FLEXTRONICS - FIT TECNOLOGIA Vortex Shedding Simulation from a Cylindrical Body in Current Water Bianca Almeida - PETROBRAS / ESSS 15:10 KARP - Insulated Piercing Connector developed for Overhead Spacer Networks in range of 15 to 35 kv Roberto Luiz Escobar - KRJ Industria e Comércio Numerical Simulation of an Academic Scramjet Álvaro Francisco Santos Pivetta - ITA C-band Horn Antenna Array Design with HFSS Claudio Motta - USP Displacement Thickness Evaluation for BPM - Type Airfoil - TE Prediction Models Joseph Y. Saab Jr. - IMT Instituto Mauá de Tecnologia 15:30 Correction on the Theory of Naval Structures Analysis Using Parametric FEM of a Ship in True Scale Bruno Pegoraro - USP Numerical Simulation of Binary Gas Flow in a Plasma Torch Reactor Cintia Soares - UFSC RFID System Design Optimization Gilberto de Tadeu Santos Souza - UNICAMP 15:50 REFRESHMENTS AND ASK THE EXPERT Structural Mechanics Fluid Dynamics Structural Mechanics DEM / Multiphysics Chairman Roberto Silva Fabio Yukio Rafael Vetturazzi Nicolas Spogis 16:20 Structural Evaluation of a Corroded Chimney Hervandil Morosini Santanna - PETROBRAS Temperatures Analysis of a FPSO Offloading Hoses Under Flare Radiation Carlos Eduardo Reuther de Siqueira - PETROBRAS Lighter-than-Air Technology: Tensile Structures Modelling Luiz Otavio Furtado Ferreira - Airship do Brasil Use of CFD Simulation for the Thermal Insulation Design of the Sinter Plant s Primary Dedusting System of ArcelorMittal Tubarão Rafael Sartim - ArcelorMittal Tubarão Assessment of the Flow of Iron ore Through a Chute Using Discrete Element Method Marcos Estevão Assumpção - Anglo American 16:40 Comparison of Different Local Stress Approaches for Fatigue Assessment of Subsea Equipment Based on Finite Element Analysis Alexandre Miguel Calhau Martins - Technip 17:00 Thermo-mechanical FEA Applied on Fracture Behavior Assessments of Carbon Steel Flanges in Low Temperatures Almir Sobral Monteiro da Silva - PETROBRAS CFD Study of the Constructive Parameters of a Solar Chimney Roberto Kinceler - CELESC Dynamic Analysis of a Semi-Trailer Mounted Platform for Highly Mobile Electrical Heavy Equipment Vinicius de Almeida Lima - VirtualCAE Blast Furnace 02 Tuyere Cooling System - Heat and Fluid Dynamic Analysis Sergio Mattedi - ArcelorMittal Tubarão Numerical Study of Gas-Liquid Flow Patterns in Ducts: Comparison with Baker Chart Predictions Cintia Soares - UFSC Geometric Changes in Pitman-Arms Thiago Bonjorno Bredoff - SIFCO Tridimensional Numerical Finite Element Method to Simulate Deep Tunnels with Shotcrete Lining Paola Villalba Fiore - UFRGS 17:20 Comparison Between the Three Methods of Analysis of ASME Sec VIII div 2 for Protection Against Plastic Colapse Flavio Pereira de Moraes - BRASKEM Hydraulic Transient Analysis of Surge Tanks Antonio Braulio Neto - EPUSP Beginning with Composite Simulation Rheology, Simulation and Validation Igor Rodrigues - UFABC Thermomecanical Modeling of Mass Concrete Constructed in Layers Flávio Mamede P. Gomes - FURNAS 17:40 Structural Integrity Analysis of Tank Bottom Damaged by Corrosion Maurício Pacheco - PETROBRAS / ESSS Development of a Customized interface for Flare CFD Simulations Daniel Ludwig - PETROBRAS / ESSS Predicting Resonant Behavior in Planetary Gear Rings Using ANSYS Rafael Rodarte - SEW EURODRIVE A Numerical Study and Analysis of the Reactive Flow of a Microturbine Combustor with a Rotating Casing Diogo Dantas Ribeiro - PETROBRAS Technical Discussion Structural Mechanics Technical Discussion Fluid Dynamics Technical Discussion Electromagnetics Technical Discussion Optimization

11 USER TECHNICAL SESSIONS uu May 07 Room Lorangerie I Lorangerie II Malmaison Chambord Structural Mechanics Fluid Dynamics Fluid Dynamics Electromagnetics Chairman Eduardo Araujo Martin Kessler Leon White Juliano Mologni 14:30 Thermo-mechanical analysis of refractory nozzles with temperature-dependent material properties Alexandre Dolabella Resende - Magnesita Development of a Reaction Model for a HDT Reactor with the Use of CFD Alexandre de Oliveira Silva - UNICAMP Automotive Water Ingestion and Pressure Analysis Using Multiphase CFD Filipe Fabian Buscariolo - General Motors Thermal Simulation of a Distribution Transformer Integrated to an Electronic On-Load Tap Changer Carlos Renato Faleiro - UFSM 14:50 Thermo-Structural Analysis of a Steel Shop Ladle Luiz Otavio Rocha Peres - USIMINAS CFD in Agitation and Mixing - Key of Success Alexandre Sampaio de Lima Malagodi - SEMCO Complex Brake System Simulation Using Fluent - 30 min Down Hill Monitoring Julio Cesar Lelis Alves - General Motors Cognitive Network Based on Reconfigurable Antennas and FPGA Processing Marilia Martins Bontempo - INATEL 15:10 Thermal-mechanical Numerical Simulation of RH-degasser s Snorkel: a Submodeling Approach Lucas Breder Teixeira - Magnesita 15:30 Optimization of Components Composite Materials for Water Meter: A Heuristic Considering the FEA Methodology Bruno Brasseolotti - ITRON Rapid Design of an optimized Radial Compressor using CFturbo and ANSYS Enrique Correa - CFturbo Software & Engineering GmbH CFD Numerical Simulations of Hydraulic Turbine Type Francis Julio Duarte - iesss Water and Water-Urea Mixture Evaporation Comparison in SCR System for Diesel Engine Vehicle Renan Sadao Kuroda Rodrigues - TENNECO Water Flow Simulation over a Vehicle s Roof Using Multiphase CFD Filipe Fabian Buscariolo - General Motors 15:50 REFRESHMENTS AND ASK THE EXPERT Structural Mechanics Structural Mechanics Multidisciplinary Design Optimization Fluid Dynamics Chairman Giuseppe Mirlisenna Fabiano Diesel Guilherme Jenovencio Armando Souza 16:20 Dynamic Analysis of Mill Bases Frederico Mol Alvares da Silva - KOT ENGENHARIA A Transient Dynamics Simulation Model for Reciprocating Compressors with Advanced Functions on Rigid Body Dynamics Fernando Diaz - UFSC Optimization of the Parameters of a Model Pump in Electric Submersible Pumping Systems Ana Carla Andrade - UFRN Numerical Model of the Dielectric Effective Permittivity for the Equivalent Circuit Method in Square Loop Frequency Selective Surfaces Mario Alberto Rodriguez Barrera - UFSC A Sapphire Cavity Prototype at 10 GHz Using HFSS Software Vanessa Magri - UFF Simulation of the 3D Incompressible Turbulent Viscous Flow Around a Complete INPAER Aircraft Marcos Soares - INPAER 16:40 Safety Assessment of Inclined Buildings in Santos Paulo de Mattos Pimenta - Escola Politécnica da USP Simulation of Bolted Connections with Threaded Hole in Gray Cast Iron Component with Experimental Validation Róbinson João Jabuosnki Júnior - Stara S.A. Optimization of a Gasification Process in a 5MW Circulating Fluidized Bed Unit Using modefrontier Daniel Augusto Kestering - SATC Computational Modeling of Primary Gas Cleaning System for Blast Furnace Leonardo Camilo dos Reis - USIMINAS 17:00 FEM Structural Analysis for a Hydraulic Balanced Cantilever Equipment Carlos Alberto Medeiros - UMC Simplified Bolt Thread Modeling on Workbench Mattias da Silva Castro - EMBRACO Applications of modefrontier in Liquid Propellant Rocket Engine Design Bernardo Reis Dreyer de Souza - Instituto de Aeronautica e Espaco Use of Hexa Meshing for Robust Results Gustavo Trapp e Marcello Areal - EMBRAER 17:20 Reinforcement of the Coverage of the Engenhão Stadium Nelson Szilard Galgoul - NSG Engenharia Splined Wheel Stud Interference Contact Sergio Scabar - ZF do Brasil Ltda. Optimization of the Geometric Parameters for Longitudinal Vortex Generators Applied to fin-tube Compact Heat Exchanger Leandro Oliveira Salviano - USP Numerical Simulation on Shock Tube Bruno Coelho Lima - ITA 17:40 FSI, Applying the Check Engineering Revision of the Beira Rio Stadium Nelson Fiedler - FIEDLER Engenharia Linear Analysis to Evaluate Failure in Structures Submitted to Static Loads Erico Romera Fulco - Tuper Modefrontier and ANSYS at Embraco Mattias da Silva Castro - EMBRACO Supersonic Flow at the Leading Edge of the Flat Plate Jayme Rodrigues Teixeira da Silva - IEAv/DCTA CONVERGENCE BEST PAPER AWARD AND ESSS ACADEMIC CHALLENGE AWARD

12 ESSS COMPUTATIONAL MODELING CHALLENGE: 5 th edition ESSS are pleased to invite all conference participants to visit the poster session at the foyer on May 06 and 07, The challenge was created with the objective to promote the exchange of ideas and experiences between academia and industry. The competition consists of proposing an engineering problem solution through the use of computational simulation software provided by ESSS. 5 ESSS COMPUTATIONAL th MODELING CHALLENGE 2015 uu CHALLENGE Winners ANNOUNCEMENT Winners will be announced on Thursday May 07, 2015.

13 Convergence Best Paper Award The 2015 ESSS Convergence & ANSYS Users Meeting will give out an award for Best Paper presentation at the event. This award aims to recognize the outstanding study which best encompasses the nature of engineering simulation, and to stimulate the ongoing development of analyses of increasingly complex engineering problems. The author of the best Paper will win a trip (travel and accommodation expenses paid for) to attend the ANSYS Conference & CADFEM Users Meeting (ACUM) in Bremem, Germany, June 24th-26th. uu Winners ANNOUNCEMENT Winners will be announced on Thursday May 07, uu Nominees Thermo-Mechanical Analysis of Refractory Nozzles with Temperature-Dependent Material Properties Alexandre Dolabella Resende - Magnesita Thermo-Mechanical FEA Applied on Fracture Behavior Assessments of Carbon Steel Flanges in Low Temperatures Almir Sobral Monteiro da Silva - PETROBRAS Applications of modefrontier in Liquid Propellant Rocket Engine Design Bernardo Reis Dreyer de Souza - Instituto da Aeronáutica e Espaço (IAE) Dynamic Analysis of a Semi-Trailer Mounted Platform for Highly Mobile Electrical Heavy Equipment Vinicius de Almeida Lima - VirtualCAE Automotive Water Ingestion and Pressure Analysis Using Multiphase CFD Filipe Fabian Buscariolo - General Motors Development of a Reaction Model for a HDT Reactor with the Use of CFD Alexandre de Oliveira Silva - UNICAMP Simplified Bolt Thread Modeling on Workbench Mattias da Silva Castro - Embraco CFD Assisted Offshore Helideck Design Daniel Fonseca de Carvalho e Silva - PETROBRAS

14 VENUE Grand Mercure São Paulo Ibirapuera Rua Sena Madureira IBIRAPUERA - SÃO PAULO - SP Phone Number: +55 (11) RATES Daily rate for 2015 ESSS Conference & ANSYS Users Meeting. Phone Number: +55 (11) ou Single Room: R$ 489,00 (+ 5%) MORE information InformaTION AND REGISTRATION São Paulo: +55 (11) Rio de Janeiro: +55 (21) Florianópolis: +55 (48)

Simulation of Fluid-Structure Interactions in Aeronautical Applications

Simulation of Fluid-Structure Interactions in Aeronautical Applications Simulation of Fluid-Structure Interactions in Aeronautical Applications Martin Kuntz Jorge Carregal Ferreira ANSYS Germany D-83624 Otterfing Martin.Kuntz@ansys.com December 2003 3 rd FENET Annual Industry

More information

Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology

Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology Dimitrios Sofialidis Technical Manager, SimTec Ltd. Mechanical Engineer, PhD PRACE Autumn School 2013 - Industry

More information

Titelmasterformat durch Klicken bearbeiten

Titelmasterformat durch Klicken bearbeiten Titelmasterformat durch Klicken bearbeiten ANSYS AIM Product simulation for every engineer Erke Wang CADFEM GmbH Georg Scheuerer ANSYS Germany GmbH Christof Gebhardt CADFEM GmbH All products involve multiple

More information

Florianópolis, March 21, 2014. Elizabeth Wegner Karas Organizing Committee

Florianópolis, March 21, 2014. Elizabeth Wegner Karas Organizing Committee We hereby certify that, Ana Flora Pereira de Castro Humes, USP - Escola Politécnica, participated in the X Brazilian Workshop on Continuous Optimization. Celebrating Clovis Gonzaga's 70th birthday held

More information

CFD analysis of external aerodynamic and entry into to the air conditioning system on the roof of a bus

CFD analysis of external aerodynamic and entry into to the air conditioning system on the roof of a bus CFD analysis of external aerodynamic and entry into to the air conditioning system on the roof of a bus Samuel Diaz ESSS Argentina Samuel.diaz@esss.com.ar PRESENTATION TOPICS Company Overview; Problem

More information

MANAGEMENT FUNDAMENTALS

MANAGEMENT FUNDAMENTALS The effective strategic planning and proven execution capability, associated with innovationand value creation-oriented management, are the principles that guide Ultrapar in its growth trajectory. The

More information

Búzios, November 25, 2009. Jorge P. Zubelli Coordinator

Búzios, November 25, 2009. Jorge P. Zubelli Coordinator We hereby certify that Alessandro Martim Marques, Banco Itaú S.a., participated in the Research in Options 2009, held at Hotel Atlântico Búzios, Búzios, RJ, from November 23 to 25, 2009. We hereby certify

More information

THE NUMERICAL SIMULATION CONFERENCE

THE NUMERICAL SIMULATION CONFERENCE EXHIBITION & SPONSORSHIP PROGRAM THE NUMERICAL SIMULATION CONFERENCE ANSYS CONFERENCE & 33 rd CADFEM USERS MEETING 2015 CONVERGENCE EXHIBITION & SPONSORSHIP PROGRAM THE NUMERICAL SIMULATION CONFERENCE

More information

Búzios, December 12, 2012. Jorge Zubelli Organizing Committee

Búzios, December 12, 2012. Jorge Zubelli Organizing Committee We hereby certify that, Adriano De Cezaro, Fundação Universidade do Rio Grande, participated in the Mathematics & Finance: Research in Options, held at Hotel Atlântico, Búzios - RJ, from December 7 to

More information

2014 ESSS CONFERENCE & ANSYS USERS MEETING

2014 ESSS CONFERENCE & ANSYS USERS MEETING Caesar Business Faria Lima, São Paulo SP - Brazil May 19-21, 2014 FINAL PROGRAM Organization: Academic Challenge Support: Sponsors: Colombia Bogotá May, 12-13 Argentina Buenos Aires May, 14 Peru Lima May,

More information

Simulation Techniques for Tablet and Mobile Phone Design Bill McGinn; Ansys Senior Application Engineer

Simulation Techniques for Tablet and Mobile Phone Design Bill McGinn; Ansys Senior Application Engineer Simulation Techniques for Tablet and Mobile Phone Design Bill McGinn; Ansys Senior Application Engineer 1 Tablets in our daily lives Tablets are very entertaining, stylish and powerful Shopping, reading,

More information

Customer Training Material. Lecture 2. Introduction to. Methodology ANSYS FLUENT. ANSYS, Inc. Proprietary 2010 ANSYS, Inc. All rights reserved.

Customer Training Material. Lecture 2. Introduction to. Methodology ANSYS FLUENT. ANSYS, Inc. Proprietary 2010 ANSYS, Inc. All rights reserved. Lecture 2 Introduction to CFD Methodology Introduction to ANSYS FLUENT L2-1 What is CFD? Computational Fluid Dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions,

More information

Structural Integrity Analysis of the Charging Air Tube Support for a Diesel Engine of Commercial Vehicle

Structural Integrity Analysis of the Charging Air Tube Support for a Diesel Engine of Commercial Vehicle 2012-36-0457 Structural Integrity Analysis of the Charging Air Tube Support for a Diesel Engine of Commercial Vehicle Thiago Barão Negretti, Helio Kitagawa T-Systems do Brasil Antonio Augusto Couto Universidade

More information

Master s Degree in Numerical Simulation in Engineering with ANSYS. Catalogue. Master s Degree in Numerical Simulation in Engineering with ANSYS

Master s Degree in Numerical Simulation in Engineering with ANSYS. Catalogue. Master s Degree in Numerical Simulation in Engineering with ANSYS Master s Degree in Numerical Simulation in Engineering with ANSYS Catalogue Master s 1 Degree in Numerical Simulation in Engineering with ANSYS Universidad 2014 ANSYS, Politécnica Inc. de Madrid - ANSYS

More information

ME6130 An introduction to CFD 1-1

ME6130 An introduction to CFD 1-1 ME6130 An introduction to CFD 1-1 What is CFD? Computational fluid dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions, and related phenomena by solving numerically

More information

Bahia, October 22, 2011. Paulo Varandas Organizing Committee

Bahia, October 22, 2011. Paulo Varandas Organizing Committee We hereby certify that, Alien Herrera Torres, Universidade Federal Fluminense, participated in the Workshop on Dynamical Systems, held at Bahia, Salvador, from October 16 to 22, 2011. We hereby certify

More information

Graduate Courses in Mechanical Engineering

Graduate Courses in Mechanical Engineering Graduate Courses in Mechanical Engineering MEEG 501 ADVANCED MECHANICAL ENGINEERING ANALYSIS An advanced, unified approach to the solution of mechanical engineering problems, with emphasis on the formulation

More information

Computational Fluid Dynamic Modeling Applications

Computational Fluid Dynamic Modeling Applications Computational Fluid Dynamic Modeling Applications Canadian Heavy Oil Conference Dr. Marvin Weiss What is CFD Computational Fluid Dynamics Colorful Fluid Dynamics Colors For Directors Carefully Fitted Data

More information

STRUCTURAL OPTIMIZATION OF REINFORCED PANELS USING CATIA V5

STRUCTURAL OPTIMIZATION OF REINFORCED PANELS USING CATIA V5 STRUCTURAL OPTIMIZATION OF REINFORCED PANELS USING CATIA V5 Rafael Thiago Luiz Ferreira Instituto Tecnológico de Aeronáutica - Pça. Marechal Eduardo Gomes, 50 - CEP: 12228-900 - São José dos Campos/ São

More information

OPERATOR ALGEBRAS AND QUANTUM PHYSICS A Satellite Conference to the XVIII International Congress on Mathematical Physics.

OPERATOR ALGEBRAS AND QUANTUM PHYSICS A Satellite Conference to the XVIII International Congress on Mathematical Physics. We hereby certify that Alan Garbarz, from CONICET / IFLP, Universidad de Buenos Aires, Argentina, participated in the Satellite Conference Operator Algebras and Quantum Physics, held at the We hereby certify

More information

INTERACTION OF LIQUID MOTION ON MOBILE TANK STRUCTURE

INTERACTION OF LIQUID MOTION ON MOBILE TANK STRUCTURE Journal of KONES Powertrain and Transport, Vol. 18, No. 3 2011 INTERACTION OF LIQUID MOTION ON MOBILE TANK STRUCTURE Mariusz Domaga a, Edward Lisowski Cracow University of Technology, Department of Mechanical

More information

Rail Brazil Tech Business Summit Location: Expo Center Norte November 5-7 2013 São Paulo

Rail Brazil Tech Business Summit Location: Expo Center Norte November 5-7 2013 São Paulo Rail Brazil Tech Business Summit Location: Expo Center Norte November 5-7 2013 São Paulo Building a New Platform for Brazilian Rail Sector: Political Strategies, Technologies and Cost Reduction Solutions

More information

DCTA/IAE Aeroelasticity Branch Theoretical and Experimental Aeroelasticity Activities

DCTA/IAE Aeroelasticity Branch Theoretical and Experimental Aeroelasticity Activities DCTA/IAE Aeroelasticity Branch Theoretical and Experimental Aeroelasticity Activities Roberto GIL Annes da Silva Research Engineer - DCTA/IAE/ALA-L Adjunct Professor - ITA/IEA Outline Applied Aeroelasticity

More information

Computational Fluid Dynamics (CFD) and Multiphase Flow Modelling. Associate Professor Britt M. Halvorsen (Dr. Ing) Amaranath S.

Computational Fluid Dynamics (CFD) and Multiphase Flow Modelling. Associate Professor Britt M. Halvorsen (Dr. Ing) Amaranath S. Computational Fluid Dynamics (CFD) and Multiphase Flow Modelling Associate Professor Britt M. Halvorsen (Dr. Ing) Amaranath S. Kumara (PhD Student), PO. Box 203, N-3901, N Porsgrunn, Norway What is CFD?

More information

Búzios, December 5, 2013. Jorge Zubelli Organizing Committee

Búzios, December 5, 2013. Jorge Zubelli Organizing Committee We hereby certify that, Alberto Moraes Marques, Petróleo Brasileiro S/a, participated in the Mathematics & Finance: Research in Options, held at Pérola Búzios Hotel, Búzios - RJ, from November 30 to December

More information

A MTR FUEL ELEMENT FLOW DISTRIBUTION MEASUREMENT PRELIMINARY RESULTS

A MTR FUEL ELEMENT FLOW DISTRIBUTION MEASUREMENT PRELIMINARY RESULTS A MTR FUEL ELEMENT FLOW DISTRIBUTION MEASUREMENT PRELIMINARY RESULTS W. M. Torres, P. E. Umbehaun, D. A. Andrade and J. A. B. Souza Centro de Engenharia Nuclear Instituto de Pesquisas Energéticas e Nucleares

More information

CFD: What is it good for?

CFD: What is it good for? CFD: What is it good for? Tom O Mahoney TNO Fluid Dynamics Introduction to CFD CFD - Computational Fluid Dynamics Computational the using of computers to simulate the physics of fluids Fluid Either gas

More information

TOTVS S.A. Corporate Taxpayer s ID (CNPJ/MF) 53.113.791/0001-22 Corporate Registry ID (NIRE) 35.300.153.171

TOTVS S.A. Corporate Taxpayer s ID (CNPJ/MF) 53.113.791/0001-22 Corporate Registry ID (NIRE) 35.300.153.171 TOTVS S.A. Corporate Taxpayer s ID (CNPJ/MF) 53.113.791/0001-22 Corporate Registry ID (NIRE) 35.300.153.171 MINUTES OF THE BOARD OF DIRECTORS MEETING HELD ON APRIL 23, 2009 1. - DATE, TIME AND PLACE OF

More information

- Instituto Brasileiro de Política e Direito da Informática - IBDI

- Instituto Brasileiro de Política e Direito da Informática - IBDI Contact information 1. Organization's Name: - Instituto Brasileiro de Política e Direito da Informática - IBDI (Brazilian Institute of Policy and Cyberlaw, or Brazilian Institute of IT Law and Legal Policy)

More information

Rapid Design of an optimized Radial Compressor using CFturbo and ANSYS

Rapid Design of an optimized Radial Compressor using CFturbo and ANSYS Rapid Design of an optimized Radial Compressor using CFturbo and ANSYS Enrique Correa, Marius Korfanty, Sebastian Stübing CFturbo Software & Engineering GmbH, Dresden (Germany) PRESENTATION TOPICS 1. Company

More information

CHAPTER 4 4 NUMERICAL ANALYSIS

CHAPTER 4 4 NUMERICAL ANALYSIS 41 CHAPTER 4 4 NUMERICAL ANALYSIS Simulation is a powerful tool that engineers use to predict the result of a phenomenon or to simulate the working situation in which a part or machine will perform in

More information

Introduction to CFD Analysis

Introduction to CFD Analysis Introduction to CFD Analysis Introductory FLUENT Training 2006 ANSYS, Inc. All rights reserved. 2006 ANSYS, Inc. All rights reserved. 2-2 What is CFD? Computational fluid dynamics (CFD) is the science

More information

ENHANCED PROBLEM SOLVING; THE INTEGRATION OF CFD AND OTHER ENGINEERING APPLICATIONS

ENHANCED PROBLEM SOLVING; THE INTEGRATION OF CFD AND OTHER ENGINEERING APPLICATIONS Seventh International Conference on CFD in the Minerals and Process Industries CSIRO, Melbourne, Australia 9-11 December 2009 ENHANCED PROBLEM SOLVING; THE INTEGRATION OF CFD AND OTHER ENGINEERING APPLICATIONS

More information

Simulation of Water-in-Oil Emulsion Flow with OpenFOAM using Validated Coalescence and Breakage Models

Simulation of Water-in-Oil Emulsion Flow with OpenFOAM using Validated Coalescence and Breakage Models Simulation of Water-in-Oil Emulsion Flow with OpenFOAM using Validated Coalescence and Breakage Models Gabriel G. S. Ferreira*, Jovani L. Favero*, Luiz Fernando L. R. Silva +, Paulo L. C. Lage* Laboratório

More information

CCTech TM. ICEM-CFD & FLUENT Software Training. Course Brochure. Simulation is The Future

CCTech TM. ICEM-CFD & FLUENT Software Training. Course Brochure. Simulation is The Future . CCTech TM Simulation is The Future ICEM-CFD & FLUENT Software Training Course Brochure About. CCTech Established in 2006 by alumni of IIT Bombay. Our motive is to establish a knowledge centric organization

More information

Simulation im Bereich der Windenergie ein Überblick. Dipl.-Ing. (FH) Nathalie Mattwich, CADFEM GmbH Dipl.-Phys. oec Stephan Hecht, ANSYS Germany GmbH

Simulation im Bereich der Windenergie ein Überblick. Dipl.-Ing. (FH) Nathalie Mattwich, CADFEM GmbH Dipl.-Phys. oec Stephan Hecht, ANSYS Germany GmbH Simulation im Bereich der Windenergie ein Überblick Dipl.-Ing. (FH) Nathalie Mattwich, CADFEM GmbH Dipl.-Phys. oec Stephan Hecht, ANSYS Germany GmbH Agenda Uhrzeit Thema Referent 16:00 16:30 Simulation

More information

Angra dos Reis, December 1, 2011. Jorge Zubelli Organizing Committee

Angra dos Reis, December 1, 2011. Jorge Zubelli Organizing Committee We hereby certify that, Alan De Genaro Dario, Bm&Fbovespa, participated in the Mathematics & Finance: Research in Options, held at Hotel do Bosque, Angra dos Reis - RJ, from November 25 to December 1,

More information

ANSYS for Tablet Computer Design

ANSYS for Tablet Computer Design ANSYS for Tablet Computer Design Steven G. Pytel, PhD. Signal Integrity Product Manager 1 Confidence by Design Chicago, IL June 14, 2012 Tablets in our daily lives Tablets are very entertaining, stylish

More information

Overview. also give you an idea of ANSYS capabilities. In this chapter, we will define Finite Element Analysis and. Topics covered: B.

Overview. also give you an idea of ANSYS capabilities. In this chapter, we will define Finite Element Analysis and. Topics covered: B. 2. FEA and ANSYS FEA and ANSYS Overview In this chapter, we will define Finite Element Analysis and also give you an idea of ANSYS capabilities. Topics covered: A. What is FEA? B. About ANSYS FEA and ANSYS

More information

ANSYS Release 15.0 Structural Mechanics Highlights. ANSYS Inc. CADFEM (AG) Suisse

ANSYS Release 15.0 Structural Mechanics Highlights. ANSYS Inc. CADFEM (AG) Suisse ANSYS Release 15.0 Structural Mechanics Highlights ANSYS Inc. CADFEM (AG) Suisse 1 Motivation for Mesh Assemblies Geometry is not anymore the starting point of a Workbench based structural simulation.

More information

Master Degree in Systems and Automation Engineering Engineering Department - Universidade Federal de Lavras

Master Degree in Systems and Automation Engineering Engineering Department - Universidade Federal de Lavras History Since 2007 Main areas: Electrical Engineering and Biomedical Engineering Lines of research: Computational Intelligence, Modeling, Systems Automation; Signal Processing, Instrumentation and Vision

More information

FLUID FLOW ANALYSIS OF CENTRIFUGAL FAN BY USING FEM

FLUID FLOW ANALYSIS OF CENTRIFUGAL FAN BY USING FEM International Journal of Mechanical Engineering and Technology (IJMET) Volume 7, Issue 2, March-April 2016, pp. 45 51, Article ID: IJMET_07_02_007 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=7&itype=2

More information

ISE Satellite Student Regional Symposium - Environmental Electrochemistry Meeting (Semana de Eletroquímica Ambiental (in Portuguese))

ISE Satellite Student Regional Symposium - Environmental Electrochemistry Meeting (Semana de Eletroquímica Ambiental (in Portuguese)) ISE Satellite Student Regional Symposium - Environmental Electrochemistry Meeting (Semana de Eletroquímica Ambiental (in Portuguese)) Aim The proposal to hold the Environmental Electrochemistry Meeting

More information

GT2011 46090 ANALYSIS OF A MICROGASTURBINE FED BY NATURAL GAS AND SYNTHESIS GAS: MGT TEST BENCH AND COMBUSTOR CFD ANALYSIS

GT2011 46090 ANALYSIS OF A MICROGASTURBINE FED BY NATURAL GAS AND SYNTHESIS GAS: MGT TEST BENCH AND COMBUSTOR CFD ANALYSIS ASME Turbo Expo 2011 June 6 10, 2011 Vancouver, Canada GT 2011 46090 ANALYSIS OF A MICROGASTURBINE FED BY NATURAL GAS AND SYNTHESIS GAS: MGT TEST BENCH AND COMBUSTOR CFD ANALYSIS M. Cadorin 1,M. Pinelli

More information

Introduction to CFD Analysis

Introduction to CFD Analysis Introduction to CFD Analysis 2-1 What is CFD? Computational Fluid Dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions, and related phenomena by solving numerically

More information

TwinMesh for Positive Displacement Machines: Structured Meshes and reliable CFD Simulations

TwinMesh for Positive Displacement Machines: Structured Meshes and reliable CFD Simulations TwinMesh for Positive Displacement Machines: Structured Meshes and reliable CFD Simulations 05.06.2014 Dipl.-Ing. Jan Hesse, Dr. Andreas Spille-Kohoff CFX Berlin Software GmbH Karl-Marx-Allee 90 A 10243

More information

Value of IEEE s Online Collections

Value of IEEE s Online Collections Value of IEEE s Online Collections Judy H. Brady, IEEE Aveiro, Portugal February 2013 About the IEEE A not-for-profit society World s largest technical membership association with over 400,000 members

More information

SYMPOSIUM ON CARDIOVASCULAR SURGERY SUMMER SYMPOSIUM

SYMPOSIUM ON CARDIOVASCULAR SURGERY SUMMER SYMPOSIUM SYMPOSIUM ON CARDIOVASCULAR SURGERY SUMMER SYMPOSIUM November 27-28, 2014 SCIENTIFIC PROGRAM Instituto Dante Pazzanese de Cardiologia São Paulo - Brazil Message Institute Dante Pazzanese of Cardiolgy accomplishes

More information

Nuclear Space Applications: A Brazilian View

Nuclear Space Applications: A Brazilian View Nuclear Space Applications: A Brazilian View Lamartine Nogueira Frutuoso Guimarães Nuclear Energy Division Institute for Advanced Studies Instituto de Estudos Avançados - IEAv guimarae@ieav.cta.br lamartine.guimaraes@pq.cnpq.br

More information

CastNet: Modelling platform for open source solver technology

CastNet: Modelling platform for open source solver technology CastNet: Modelling platform for open source solver technology. DHCAE Tools GmbH Address: Friedrich-Ebert-Str. 368, 47800 Krefeld, Germany / Company site: Alte Rather Str. 207 / 47802 Krefeld Phone +49

More information

MASTER OF ENGINEERING Mechanical Engineering Program

MASTER OF ENGINEERING Mechanical Engineering Program MASTER OF ENGINEERING Mechanical Engineering Program Note: On-line registration is available to CURRENT M.Eng. students only. NEW students are NOT permitted to register on-line for their first semester.

More information

WEEKLY SCHEDULE. GROUPS (mark X) SPECIAL ROOM FOR SESSION (Computer class room, audio-visual class room)

WEEKLY SCHEDULE. GROUPS (mark X) SPECIAL ROOM FOR SESSION (Computer class room, audio-visual class room) SESSION WEEK COURSE: THERMAL ENGINEERING DEGREE: Aerospace Engineering YEAR: 2nd TERM: 2nd The course has 29 sessions distributed in 14 weeks. The laboratory sessions are included in these sessions. The

More information

Law and New Development Strategies: Brazil and Beyond

Law and New Development Strategies: Brazil and Beyond presents: Law and New Development Strategies: Brazil and Beyond Sponsors: São Paulo Law School of Fundação Getulio Vargas (Direito GV) University of São Paulo (USP), Faculty of Law Institute for Global

More information

LIGHT S.A. Corporate Taxpayer s ID (CNPJ/MF) No. 03.378.521/0001-75 Corporate Registry (NIRE) No. 33.3.0026316-1 PUBLICLY HELD COMPANY.

LIGHT S.A. Corporate Taxpayer s ID (CNPJ/MF) No. 03.378.521/0001-75 Corporate Registry (NIRE) No. 33.3.0026316-1 PUBLICLY HELD COMPANY. LIGHT S.A. Corporate Taxpayer s ID (CNPJ/MF) No. 03.378.521/0001-75 Corporate Registry (NIRE) No. 33.3.0026316-1 PUBLICLY HELD COMPANY. EXCERPT FROM THE MINUTES OF LIGHT S.A. ( Company ) S BOARD OF DIRECTORS'

More information

Electrical Drive Modeling through a Multiphysics System Simulation Approach

Electrical Drive Modeling through a Multiphysics System Simulation Approach Application Brief Electrical Drive Modeling through a The electric drive system is a key application in power electronics. Optimizing such complex mechatronic system requires in-depth analysis, expertise

More information

Aeroelastic Investigation of the Sandia 100m Blade Using Computational Fluid Dynamics

Aeroelastic Investigation of the Sandia 100m Blade Using Computational Fluid Dynamics Aeroelastic Investigation of the Sandia 100m Blade Using Computational Fluid Dynamics David Corson Altair Engineering, Inc. Todd Griffith Sandia National Laboratories Tom Ashwill (Retired) Sandia National

More information

Lecture 6 - Boundary Conditions. Applied Computational Fluid Dynamics

Lecture 6 - Boundary Conditions. Applied Computational Fluid Dynamics Lecture 6 - Boundary Conditions Applied Computational Fluid Dynamics Instructor: André Bakker http://www.bakker.org André Bakker (2002-2006) Fluent Inc. (2002) 1 Outline Overview. Inlet and outlet boundaries.

More information

Aerospace Systems. Industry Spotlight

Aerospace Systems. Industry Spotlight 4 Aerospace Systems Engineering simulation is an integral part of the development process for critical components and major subsystems on today s aircraft from nose to tail. By Simon Pereira Senior Application

More information

OpenFOAM Optimization Tools

OpenFOAM Optimization Tools OpenFOAM Optimization Tools Henrik Rusche and Aleks Jemcov h.rusche@wikki-gmbh.de and a.jemcov@wikki.co.uk Wikki, Germany and United Kingdom OpenFOAM Optimization Tools p. 1 Agenda Objective Review optimisation

More information

CHANGING INTERNATIONAL INVESTMENT STRATEGIES: THE NEW FORMS OF FOREIGN INVESTMENT IN BRAZIL

CHANGING INTERNATIONAL INVESTMENT STRATEGIES: THE NEW FORMS OF FOREIGN INVESTMENT IN BRAZIL 9 Originally published by Ipea in January 1982 as number 45 of the series Texto para Discussão. CHANGING INTERNATIONAL INVESTMENT STRATEGIES: THE NEW FORMS OF FOREIGN INVESTMENT IN BRAZIL Eduardo A. Guimarães

More information

8:50 Opening statement - Dr. Felipe José Fernández Coimbra (Head of the Department of Abdominal Surgery, Hospital A. C.

8:50 Opening statement - Dr. Felipe José Fernández Coimbra (Head of the Department of Abdominal Surgery, Hospital A. C. IV SYMPOSIUM OF THE GASTROINTESTINAL ONCOLOGY CONTINUING MEDICAL EDUCATION PROGRAM - DEPARTMENT OF ABDOMINAL SURGERY, SURGICAL ONCOLOGY, A. C. CAMARGO CANCER HOSPITAL ESOPHAGOGASTRIC CANCER AND GIST SCIENTIFIC

More information

NET SERVIÇOS DE COMUNICAÇÃO S.A. CORPORATE TAX ID (CNPJ) # 00.108.786/0001-65 NIRE # 35.300.177.240 PUBLICLY TRADED COMPANY

NET SERVIÇOS DE COMUNICAÇÃO S.A. CORPORATE TAX ID (CNPJ) # 00.108.786/0001-65 NIRE # 35.300.177.240 PUBLICLY TRADED COMPANY NET SERVIÇOS DE COMUNICAÇÃO S.A. CORPORATE TAX ID (CNPJ) # 00.108.786/0001-65 NIRE # 35.300.177.240 PUBLICLY TRADED COMPANY MINUTES OF THE ANNUAL GENERAL MEETING HELD ON APRIL 19, 2004 VENUE, TIME AND

More information

HPC Deployment of OpenFOAM in an Industrial Setting

HPC Deployment of OpenFOAM in an Industrial Setting HPC Deployment of OpenFOAM in an Industrial Setting Hrvoje Jasak h.jasak@wikki.co.uk Wikki Ltd, United Kingdom PRACE Seminar: Industrial Usage of HPC Stockholm, Sweden, 28-29 March 2011 HPC Deployment

More information

Tomasz STELMACH. WindSim Annual User Meeting 16 June 2011

Tomasz STELMACH. WindSim Annual User Meeting 16 June 2011 Developments of PHOENICS as CFD engine for WindSim Tomasz STELMACH Ltd, UK ts@cham.co.uk WindSim Annual User Meeting 16 June 2011 Topics of presentation 1. - who we are, what we do 2. PHOENICS 3. GCV -

More information

Clients. Roberto Kross, Technical Director, MIB. Rossana Mattanza, Executive Manager, CIB

Clients. Roberto Kross, Technical Director, MIB. Rossana Mattanza, Executive Manager, CIB 1010100101110101001110101100101001101110010100101010100101110101001110101100101001101110010100101001010010101010010111011001011 Oil & Gas Industry Designing for complex engineering environments isn t best

More information

DEPARTMENT OF PETROLEUM ENGINEERING Graduate Program (Version 2002)

DEPARTMENT OF PETROLEUM ENGINEERING Graduate Program (Version 2002) DEPARTMENT OF PETROLEUM ENGINEERING Graduate Program (Version 2002) COURSE DESCRIPTION PETE 512 Advanced Drilling Engineering I (3-0-3) This course provides the student with a thorough understanding of

More information

Advanced Training and Industrial Research for Complex Engineering Systems, A+

Advanced Training and Industrial Research for Complex Engineering Systems, A+ Advanced Training and Industrial Research for Complex Engineering Systems, A+ A Task Force promoted by, with the Center for Innovation, Technology and Policy Research,, at IST, Lisboa in collaboration

More information

Journals of Repute relevant to Department of Applied Mechanics. ASME Journal of Computational and Nonlinear Dynamics

Journals of Repute relevant to Department of Applied Mechanics. ASME Journal of Computational and Nonlinear Dynamics Journals of Repute relevant to Department of Applied Mechanics Journals in Solid Mechanics Acta Mechanica AIAA Journal Archive of Applied Mechanics ASME Journal of Applied Mechanics ASME Journal of Biomechanical

More information

Pushing the limits. Turbine simulation for next-generation turbochargers

Pushing the limits. Turbine simulation for next-generation turbochargers Pushing the limits Turbine simulation for next-generation turbochargers KWOK-KAI SO, BENT PHILLIPSEN, MAGNUS FISCHER Computational fluid dynamics (CFD) has matured and is now an indispensable tool for

More information

Henrique Bursztyn Organizing Committee

Henrique Bursztyn Organizing Committee We hereby certify that, Alberto Tacchella, Inst. de Ciências Matemáticas e de Computação, participated in the IV Iberoamerican Meeting on Geometry, Mechanics and Control. Celebrating Jair Koiller s 65

More information

TOTVS S.A. Corporate Taxpayer s ID (CNPJ/MF) 53.113.791/0001-22 Corporate Registry ID (NIRE) 35.300.153.171

TOTVS S.A. Corporate Taxpayer s ID (CNPJ/MF) 53.113.791/0001-22 Corporate Registry ID (NIRE) 35.300.153.171 TOTVS S.A. Corporate Taxpayer s ID (CNPJ/MF) 53.113.791/0001-22 Corporate Registry ID (NIRE) 35.300.153.171 MINUTES OF THE BOARD OF DIRECTORS MEETING HELD ON SEPTEMBER 17, 2009 1. - DATE, TIME AND VENUE:

More information

AUTODESK SIMULATION MULTIPHYSICS 2013

AUTODESK SIMULATION MULTIPHYSICS 2013 AUTODESK SIMULATION MULTIPHYSICS 2013 Which Analysis to Use? FANKOM MÜHENDİSLİK 2/4/2013 AUTODESK SIMULATION MULTIPHYSICS Which Analysis to Use? Use the following guidelines to help choose the correct

More information

An Integrated Optimization System for ANSYS Workbench Based on ACT

An Integrated Optimization System for ANSYS Workbench Based on ACT An Integrated Optimization System for ANSYS Workbench Based on ACT Manfred Fritsch, Business Development FE-DESIGN GmbH Germany FE-DESIGN Optimization Inc Chicago USA AGENDA FE-DESIGN the optimization

More information

Enhancing Health and. Information Systems and Technologies for. Social Care. Reference. Polytechnic Institute of Leiria, Portugal

Enhancing Health and. Information Systems and Technologies for. Social Care. Reference. Polytechnic Institute of Leiria, Portugal Information Systems and Technologies for Enhancing Health and Social Care Ricardo Martinho Polytechnic Institute of Leiria, Portugal Rui Rijo Polytechnic Institute of Leiria, Portugal Maria Manuela Cruz-Cunha

More information

CFD Analysis of Supersonic Exhaust Diffuser System for Higher Altitude Simulation

CFD Analysis of Supersonic Exhaust Diffuser System for Higher Altitude Simulation Page1 CFD Analysis of Supersonic Exhaust Diffuser System for Higher Altitude Simulation ABSTRACT Alan Vincent E V P G Scholar, Nehru Institute of Engineering and Technology, Coimbatore Tamil Nadu A high

More information

INJECTION MOLDING COOLING TIME REDUCTION AND THERMAL STRESS ANALYSIS

INJECTION MOLDING COOLING TIME REDUCTION AND THERMAL STRESS ANALYSIS INJECTION MOLDING COOLING TIME REDUCTION AND THERMAL STRESS ANALYSIS Tom Kimerling University of Massachusetts, Amherst MIE 605 Finite Element Analysis Spring 2002 ABSTRACT A FEA transient thermal structural

More information

Fax: (55 11) 3051.3159

Fax: (55 11) 3051.3159 REGISTRATION FORM INTEGRAL - "Fórum and Workshop Date: November 27, 28 and 29, 2012 1,500.00 FORUM Date: November 27 and 28, 2012 1,000.00 WORKSHOP Date: November 29, 2012 600.00 NAME: COMPANY: POSITION:

More information

Aerodynamic Department Institute of Aviation. Adam Dziubiński CFD group FLUENT

Aerodynamic Department Institute of Aviation. Adam Dziubiński CFD group FLUENT Adam Dziubiński CFD group IoA FLUENT Content Fluent CFD software 1. Short description of main features of Fluent 2. Examples of usage in CESAR Analysis of flow around an airfoil with a flap: VZLU + ILL4xx

More information

Management through the

Management through the Handbook of Research on Effective Project Management through the Integration of Knowledge and Innovation George Lealjamil Informagöes em Rede, Brazil Sergio Maravilhas Lopes CETAC.MEDIA - Porto and Aveiro

More information

Funding and Human Resources

Funding and Human Resources Funding and Human Resources Corrected Budget Income Uncollected Income Euro Operating Costs: (OF) Investment Costs: (PIDDAC) OE/OF 5.876. 5.876. R&D Projects 4.752.642 4.636.482 116.16 Services 1.. 732.296

More information

Predictive Modeling of Composite Materials & Structures: State-of-the-Art Solutions and Future Challenges.

Predictive Modeling of Composite Materials & Structures: State-of-the-Art Solutions and Future Challenges. Predictive Modeling of Composite Materials & Structures: State-of-the-Art Solutions and Future Challenges. Roger A. Assaker Roger.Assaker@e-Xstream.com www.e-xstream.com Short Abstract Computer Aided Engineering

More information

D.Sc., Electrical Engineering, Federal University of Rio de Janeiro, RJ, Brazil, 1990.

D.Sc., Electrical Engineering, Federal University of Rio de Janeiro, RJ, Brazil, 1990. Curriculum Vitae Ramon Romankevicius Costa COPPE/UFRJ Department of Electrical Engineering P.O. Box 68504, 21945 970 Rio de Janeiro BRAZIL e mail: ramon@coep.ufrj.br Fax: +55 21 2562-8628 1 Educational

More information

Simulation to Analyze Two Models of Agitation System in Quench Process

Simulation to Analyze Two Models of Agitation System in Quench Process 20 th European Symposium on Computer Aided Process Engineering ESCAPE20 S. Pierucci and G. Buzzi Ferraris (Editors) 2010 Elsevier B.V. All rights reserved. Simulation to Analyze Two Models of Agitation

More information

Fatigue Life Prediction of Complex 2D Components under Mixed-Mode Variable Loading

Fatigue Life Prediction of Complex 2D Components under Mixed-Mode Variable Loading Fatigue Life Prediction of Complex 2D Components under Mixed-Mode Variable Loading M.A. Meggiolaro 1, A.C.O. Miranda 2, J.T.P. Castro 1, L.F. Martha*,2, T.N. Bittencourt 3 1 Department of Mechanical Engineering

More information

imaginit.com/autodeskcfd Scalable, robust fluid flow and thermal simulation solution

imaginit.com/autodeskcfd Scalable, robust fluid flow and thermal simulation solution Scalable, robust fluid flow and thermal simulation solution Fast, accurate, and flexible solution to test the fluid flow and thermal performance of your design Accurately predict behavior, optimize designs,

More information

Ready for Liftoff. Recent technology developments from ANSYS help aerospace engineers address pressing engineering challenges.

Ready for Liftoff. Recent technology developments from ANSYS help aerospace engineers address pressing engineering challenges. ANALYSIS TOOLS Ready for Liftoff Recent technology developments from ANSYS help aerospace engineers address pressing engineering challenges. T he global aerospace industry faces many critical challenges

More information

MEL 807 Computational Heat Transfer (2-0-4) Dr. Prabal Talukdar Assistant Professor Department of Mechanical Engineering IIT Delhi

MEL 807 Computational Heat Transfer (2-0-4) Dr. Prabal Talukdar Assistant Professor Department of Mechanical Engineering IIT Delhi MEL 807 Computational Heat Transfer (2-0-4) Dr. Prabal Talukdar Assistant Professor Department of Mechanical Engineering IIT Delhi Time and Venue Course Coordinator: Dr. Prabal Talukdar Room No: III, 357

More information

September 15-20 São José dos Campos - SP

September 15-20 São José dos Campos - SP September 15-20 São José dos Campos - SP Brazilian Organizing Committee José Leonardo Ferreira UnB Paolo Gessini UnB Rodrigo Intini Marques INPE Gilberto M. Sandonato INPE Fernando de Souza Costa - INPE

More information

Investigation of Stress Intensity Factor of Axial Compressor Blade of Helicopter

Investigation of Stress Intensity Factor of Axial Compressor Blade of Helicopter Investigation of Stress Intensity Factor of Axial Compressor Blade of Helicopter Neelesh V K Mr. Manjunath M V Mr. Devaraj Dept. of Mechanical Engineering Asst prof, Dept. of Mechanical Engineering Asst

More information

3. Prescribe boundary conditions at all boundary Zones:

3. Prescribe boundary conditions at all boundary Zones: CFD ANALYSIS OF CHANGE IN SHAPE OF SUCTION MANIFOLD TO IMPROVE PERFORMANCE OF THE CENTRIFUGAL PUMP ABSTRACT Mr. Suraj K. Patil PG Student, Department of Mechanical Engineering /BIGCE, Solapur University,

More information

TOTVS S.A. Corporate Taxpayer s ID (CNPJ/MF) 53.113.791/0001-22 Corporate Registry ID (NIRE) 35.300.153.171

TOTVS S.A. Corporate Taxpayer s ID (CNPJ/MF) 53.113.791/0001-22 Corporate Registry ID (NIRE) 35.300.153.171 TOTVS S.A. Corporate Taxpayer s ID (CNPJ/MF) 53.113.791/0001-22 Corporate Registry ID (NIRE) 35.300.153.171 MINUTES OF THE BOARD OF DIRECTORS MEETING HELD ON MARCH 24, 2011 1. - DATE, TIME AND PLACE OF

More information

COMPUTATIONAL ENGINEERING OF FINITE ELEMENT MODELLING FOR AUTOMOTIVE APPLICATION USING ABAQUS

COMPUTATIONAL ENGINEERING OF FINITE ELEMENT MODELLING FOR AUTOMOTIVE APPLICATION USING ABAQUS International Journal of Advanced Research in Engineering and Technology (IJARET) Volume 7, Issue 2, March-April 2016, pp. 30 52, Article ID: IJARET_07_02_004 Available online at http://www.iaeme.com/ijaret/issues.asp?jtype=ijaret&vtype=7&itype=2

More information

Thermo-Mechanical Coupled Simulation with LS-DYNA

Thermo-Mechanical Coupled Simulation with LS-DYNA DYNAmore GmbH Industriestraße 2, D-70565 Stuttgart andrea.erhart@dynamore.de www.dynamore.de Ingenieurbüro Tobias Loose Herdweg 13, D-75045 Wössingen Lkr. Karlsruhe loose@tl-ing.de www.loose.at Thermo-Mechanical

More information

Graduate Certificate Program in Energy Conversion & Transport Offered by the Department of Mechanical and Aerospace Engineering

Graduate Certificate Program in Energy Conversion & Transport Offered by the Department of Mechanical and Aerospace Engineering Graduate Certificate Program in Energy Conversion & Transport Offered by the Department of Mechanical and Aerospace Engineering Intended Audience: Main Campus Students Distance (online students) Both Purpose:

More information

NUCLEAR ENERGY RESEARCH INITIATIVE

NUCLEAR ENERGY RESEARCH INITIATIVE NUCLEAR ENERGY RESEARCH INITIATIVE Experimental and CFD Analysis of Advanced Convective Cooling Systems PI: Victor M. Ugaz and Yassin A. Hassan, Texas Engineering Experiment Station Collaborators: None

More information

Progress Report 2011-2013

Progress Report 2011-2013 Progress Report 2011-2013 Instituto de Pesquisas Energéticas e Nucleares São Paulo - Brasil 2014 Progress Report 2011-2013 Instituto de Pesquisas Energéticas e Nucleares São Paulo - Brasil 2014 Progress

More information

Design & Drafting Services

Design & Drafting Services Design & Drafting Services 1. Mechanical CAD Services 1. Mechanical CAD Services Mechanical Design Services: Custom machine design Packaging machine design Mechanism design Machine tool design Material

More information

Patented in 1899 in France,

Patented in 1899 in France, Feature Article Earliest Leak Detection (ELD): A New Concept of Security in Water Leak Detection in Electric Arc Furnaces Water leakage from water-cooled panels in an EAF is considered to be of high operational

More information

CFD Based Air Flow and Contamination Modeling of Subway Stations

CFD Based Air Flow and Contamination Modeling of Subway Stations CFD Based Air Flow and Contamination Modeling of Subway Stations Greg Byrne Center for Nonlinear Science, Georgia Institute of Technology Fernando Camelli Center for Computational Fluid Dynamics, George

More information

Ultrasonic Guided Waves Evaluation of Trials for Pipeline Inspection

Ultrasonic Guided Waves Evaluation of Trials for Pipeline Inspection 17th World Conference on Nondestructive Testing, 25-28 Oct 2008, Shanghai, China Ultrasonic Guided Waves Evaluation of Trials for Pipeline Inspection Francisco C. R. MARQUES 1, Alessandro DEMMA 2 1 E&P

More information