CONGRÈS INTERNATIONAUX

Size: px
Start display at page:

Download "CONGRÈS INTERNATIONAUX"

Transcription

1 CONGRÈS INTERNATIONAUX 2013 [1] Belazizia A., Benissaad S., Abboudi S. «Influence d un champ magnétique uniforme sur la convection naturelle à double diffusion d un fluide binaire dans une enceinte carrée à paroi poreuse», XI ème Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes, Reims, 3-5 juin [2] Belazizia A., Abboudi S., Benissaad S. Numerical Study of Double Diffusion Natural Convection in a Square Enclosure with Partially Active Vertical Wall, Journées Internationales de Thermique JITH 2013, Marrakech, Maroc, novembre [3] Benramdane, M., Khadraoui Y., Abboudi S. «Etude comparative des différentes installations a réfrigérations solaire à absorption», Journées Internationales de Thermique JITH 2013, Marrakech, Maroc, novembre [4] Bouchenafa R., Saim R., Abboudi S. «Etude numérique comparative de la convection forcée turbulente dans un dissipateur thermique muni des ailettes de formes carrés et circulaires», Journées Internationales de Thermique JITH 2013, Marrakech, Maroc, novembre [5] Bourouis A., Omara A., Abboudi S. «Transfert convectif à l intérieur d une cavité partiellement occupée par une couche poreuse verticale», XI ème Colloque Interuniversitaire Franco-Québécois sur la Thermique des Systèmes, Reims, 3-5 juin [6] Bourouis A., Omara A., Abboudi S. «Transfert convectif dans une cavité occupée par une couche poreuse verticale d'épaisseur variable», Journées Internationales de Thermique JITH 2013, Marrakech, Maroc, novembre [7] Chapuis Y., Demoly F., Gomes S. Towards an approach to integrate technological evolution into product design, DS 75-1: Proceedings of the 19th International Conference on Engineering Design (ICED13), Design for Harmonies, Vol.1: Design Processes, Seoul, Korea, [8] Chapuis Y., Demoly F., Gomes S. A novel framework for technological evolution within product architecture, In Prabhu V., Taisch M., Kiritsis D. (Eds), APMS 2013 Advances Production Management Systems, Advances in Production Management Systems. Sustainable Production and Service Supply Chains, Part I, IFIP AICT 414, Springer London, 2013, pp , Penn State, USA, September [9] Dadda B., Abboudi S., Zarrit R., Ghezal A. Heat and Mass Transfer Influence on Potential Variation in a PEMFC Membrane», Conférence Internationale des Energies Renouvelables (CIER 13), Sousse, Tunisie, décembre [10] Deffrenne C., Bettwy M., Robert A., Dechinkel K., Gomes S., "Parameter management in configuration for the design of products families", International Conference Advances Production and Manufacturing Systems, State College, Pennsylvania, USA, 9-12 September, [11] Demoly F., Pels H.J., Gomes S. Proactive engineering and PLM: Current status and research challenges, International Conference on Product Lifecycle Management, PLM13, Nantes, France, July 6-10, 2013, publié In Bernard A., Rivest L., Dutta D. (Eds.), IFIP AICT, Vol. 409, pp , Springer London, [12] Ferkha N., Peyraut F., Mekideche M. R., Miraoui A., Djerdir A., N-Diay A. O. Optimal Design of Geometrical Parameters of Permanent Magnet Machines in the Purpose to Reduce Its Vibratory Behavior, Powereng2013 Conference, 4 th International Conference on Power Engineering, Energy and Electrical Drives, Istanbul, Turkey, May [13] Fougères A.-J., Ostrosi E. Behaviour of Fuzzy Agents in a Collaborative Design Platform, 5 th International Joint Conference on Computational Intelligence, Vilamoura, Portugal, September /16

2 [14] Fougères A.-J., Ostrosi E., «Analysis of Fuzzy Agents Interactions and Fuzzy Agents Roles within a Collaborative Design Platform», Proceedings of the 2013 IEEE Int. Conf. on Systems, Man, and Cybernetics, (SMC 13), Manchester, UK, October 13-16, [15] Issa H., Ostrosi E., Pfaender F., Lenczner M., Habib R., Tzen MZ. Multi-scale design using a holonic approach, International Conference on Smart and Sustainable City (ICSSC 2013), Shanghai, China, August, [16] Korti M. Ch., Korti A.I.N., Abboudi S. «Simulation numérique des champs dynamique et thermique durant le moulage par injection à haute pression des métaux», Journées Internationales de Thermique JITH 2013, Marrakech, Maroc, novembre [17] Lachat R., Cara F., Dorey P. «In situ monitoring of liquid composite processing», ICCM19, 19 th International Conference on Composite Materials, Montréal, Canada, July, 28, August, 2, [18] Ostrosi E, Pfaender F., Choulier D., Fougères A.-J., Tzen MZ. Describing the engineering modeling knowledge for complexity management in the design of complex city, 19 th International Conference on Engineering Design (ICED13), Seoul, Korea, August [19] Petrazoller N., Demoly F., Deniaud S., Gomes S. Towards a knowledge-intensive framework for top-down design context definition, In Prabhu V., Taisch M., Kiritsis D. (Eds), APMS 2013 Advances Production Management Systems, Advances in Production Management Systems. Sustainable Production and Service Supply Chains, Part I, IFIP AICT 414, Springer London, 2013, pp , Penn State, USA, September [20] Selka G., Korti A.N., Abboudi S., Saim R. Thermal dynamic study of habitat using phase change materials for insulation, Journées Internationales de Thermique JITH 2013, Marrakech, Maroc, novembre /16

3 2012 [21] Bluntzer J.B., Ostrosi E., Sagot J.C. A shape grammar approach for automotive styling: the case of the French cars, NordDesign 2012, Aalborg, Denmark, August 22nd - 24th, 11 p., [22] Boudouh T., Vernier C., Lebaal N., Gomes S. DSM based knowledge configuration methodology, 14th International DSM Conference, September 13-14, Kyoto, Japan, [23] Boxberger J., Boudouh T., Gomes S. «Gestion de projet et lean engineering : application dans une PME», 1ère Conférence Internationale en Gestion de Projet, Octobre, Trois-Rivières, Canada, [24] Boxberger J., Lebouteiller M., Boudouh T., Gomes S. Toward an automatic reduction of non added values tasks in the project-product-process domain, 9th International Conference on Product Lifecycle Management, PLM 12, July 9-11, Montréal, Canada, [25] Boxberger J., Schlegel D., Lebaal N., Gomes S. Design Support based onto knowledge to increase product reliability and allow optimized abacus development, International Conference of Advances in Production Management Systems, APMS 2012, September 2012, Rhodes island, Greece, [26] Choulier D., Fougères A.-J., Ostrosi E. «Analysis of a design theory through a multiagent approach», Proceedings of the 9th Int. Symp. on Tools and Methods of Competitive Engineering, TMCE 2012, Karlsruhe, Germany, May 7 11, pp (Best Contribution Awards), [27] Demoly F., Deniaud S., Gomes S. Towards an harmonious and integrated management approach for lifecycle planning, International Conference of Advances in Production Management Systems, APMS 2012, Rhodes island, Greece, September [28] Demoly F., Kiritsis D. Asset Optimization and Predictive Maintenance in Discrete Manufacturing Industry, Workshop on Advanced Maintenance Engineering, Services and Technology, A-MEST 12, Sevilla, Spain, November [29] Demoly F., Kiritsis D. Integrated and consistent management of product-process information, Proceedings of the ASME th Biennal Conference on Engineering Systems Design and Analysis, ESDA 2012, Nantes, France, July 2-4, [30] Demoly F., Matsokis A., Kiritsis D., Gomes S. Mereotopological description of productprocess information and knowledge for PLM, 9th International Conference on Product Lifecycle Management, PLM 12, July 9-11, Montréal, Canada, [31] Fougères A.-J., Canalda P., Samaali A., Ecarot T., and Guglielmetti L. «A push service for carpooling», in Proc. of the Workshop Social Network for Mobility Services (SN4MS) associated with the IEEE Int. Conf. ithings 2012, Besançon, November 20-23, pp , [32] Fougères A.-J., Choulier D., Ostrosi E. «ADEA a multiagent system for design activity analysis», Proceedings of the 19th ISPE Int. Conf. on Concurrent Engineering (CE2012), pp , Springer-Verlag, Trier, Germany, September 3-7, [33] Issa H., Ostrosi E., Lenczner M., Habib R. Fuzzy Functional Modelling in CAD Systems. In: J. Stjepandic et al. (eds.), Concurrent Engineering Approaches for Sustainable Product Development in a Multi-Disciplinary Environment, Proceedings of the 19th ISPE International Conference on Concurrent Engineering, Trier, Germany, 3-7 September 2012, 2: , Springer- Verlag London 2013, [34] Lahoud I., Monticolo D., Hilaire V., Gomes S. A metamodeling and transformation approach for knowledge extraction, in Fourth International Conference on Networked Digital Technologies (NDT'2012), [35] Lebouteiller M., Boxberger J., Gomes S., Lebaal N., Schlegel D. A knowledge capitalization methodology based on automatic knowledge extraction from 3D CAD models, Proceedings of the ASME th Biennal Conference on Engineering Systems Design and Analysis, ESDA 2012, July 2-4, Nantes, France, /16

4 [36] Thoral-Pierre K., Torres F., Roth S. Development and validation of a biomechanical FE model (HUBYX) of the human system for high speed dynamic simulation, The 22nd International Symposium on Military Aspects of Blast and Shock (MABS22), France, [37] Sterionow P., Gruber M., Keck V., Roll K., Golle R., Hoffmann H., Volk W. Evaluation And Modeling Of The Strain-Rate Dependent Onset And Termination Of Shear Localization, Forming Technology Forum 2012, IVP, ETH Zurich, Switzerland, [38] Thoral-Pierre K., Torres F., Roth S. Development and validation of a biomechanical FE model of the human Thorax/Abdomen system for high speed dynamic simulation. Application to ballistic impact, Personal Armour Systems Symposium 2012, Nuremberg, [39] Xu Y., Domaszewski M., Chamoret D., Zhang W., Korvink J. Particle Swarm Optimization for Non-Convex Problems of Size and Shape Optimization of Trusses, in 'B.H.V. Topping, (Editor), Proceedings of the Eleventh International Conference on Computational Structures Technology, Civil-Comp Press, Stirlingshire, UK, Paper 67, Dubrovnik, Croatia, /16

5 2011 [40] Badin J., Monticolo D., Chamoret D., Gomes S. Knowledge configuration management for product design and numerical simulation'', 18th International Conference on Engineering Design (ICED11), Copenhagen, Denmark, [41] Fougères A.-J., Ostrosi E. "Fuzzy agents communities for product integrated configuration", 11 th International Conference on Intelligent Systems Design and Applications (ISDA 2011), Córdoba, Spain, November 22-24, [42] Kiani M., Torregrossa D., Peyraut F., Fahimi B., Miraoui A. "Detection of Faults in PMSM Using Field Reconstruction Method and Mechanical Impulse Response", APEC Conference, Mars 6-10, Forth Worth, Texas, pp , [43] Lebaal N., Schlegel D., Folea M. Constraint Optimization Problem For The Cutting Of A Cobalt Chrome Refractory Material, 14 th International Conference On Material Forming Esaform, Proceedings Book Series: AIP Conference Proceedings, Vol. 1353, pp , Queens Univ, Belfast, NORTH IRELAND, [44] Lebouteiller M., Lahoud I., Lebaal N., Gomes S., "Vers une ingénierie hautement productive basée sur des méthodes et outils d extraction de connaissances", 8 pages, 9e Congrès International de Génie Industriel (CIGI2011) organisé par l'école Polytechnique de Montréal à Saint-Sauveur, Québec, CANADA, [45] Monticolo D., Lahoud I., Camargo M., Morel L. «SemKnow, une architecture basée sur les Web Services Sémantiques pour la gestion des connaissances multi-sources lors des projets de développement de produit», 8 pages, 9e Congrès International de Génie Industriel (CIGI2011) organisé par l'école Polytechnique de Montréal à Saint-Sauveur, Québec, CANADA, [46] Robert A., Yan X.T., Roth S., Deschinkel K., Gomes S. "A new approach to modularity in product development utilising assembly sequence knowledge", International Conference on Engineering Design, ICED11', Copenhagen, Denmark, [47] Robert A., Vernier C., Boudouh T., Roth S., Gomes S. Towards a high productive design methodology dedicated to modular products design using a Knowledge Configuration approach International conference on Innovative Methods in Product Design IMProVe2011, Venice, June 15-17, [48] Robert A., Deschinkel K., Roth S., Yan X. T., Gomes S., "Approche DFA et conception fonctionnelle de produits modulaires : le modèle FARD", 8 pages, 9e Congrès International de Génie Industriel (CIGI2011), organisé par l'école Polytechnique de Montréal à Saint-Sauveur, Québec, CANADA, [49] Strohmeier D., Draheim J., Domaszewski M., Greiner A., Wallrabe U., Korvink J. «Particle Swarm Optimization on a new parametric model of a deformable membrane lens», Int Conf. on Optical MEMS and Nanophotonics (OMN), Istanbul, Turkey, 8-11 August [50] Vernier C., Robert A., Lebaal N., Yan X. T., Gomes S. A high productive design methodology integrated in a PLM context using Knowledge Configuration Management, In International Conference in Product Lifecycle Management (PLM11), Eindhoven, July 11-13, [51] Vernier C., Boudouh T., Lebaal N., Gomes S. "Configuration des connaissances pour la génération d applications métier", 8 pages, 9e Congrès International de Génie Industriel (CIGI2011), organisé par l'école Polytechnique de Montréal à Saint-Sauveur, Québec, CANADA, [52] Xu Y., Zhang W., Chamoret D., Domaszewski M. "Minimizing Thermal Residual Stresses in Ceramic Matrix Composites by using Particle Swarm Optimization Algorithm, Paper 37, in B.H.V. Topping Y. Tsompanakis, ed., Proceedings of the Second International Conference on Soft Computing Technology in Civil, Structural and Environmental Engineering, Civil-Comp Press (Stirlingshire, UK), Chania, Crete, Greece, /16

6 2010 [53] Badin J., Monticolo D., Chamoret D., Gomes S. Moving Toward a Product Model to Manage Data, Information and Knowledge for Mechanical Design and Simulation, Knowledge Acquisition Reuse and Evaluation KARE 2010, (SITIS 2010). In conjunction with the fourth IEEE international conference on Signal-Image Technology Internet Based Systems, Kuala Lumpur, Malaysia, [54] Choulier D. "Distribution of animation roles in a technical creativity meeting", IDMME 2010, Bordeaux, October 20-22, [55] Choulier D. "Teaching reflective practice in engineering creative design", Joint International IGIP-SEFI Annual Conference 2010, Trnava, Slovakia, 19th - 22nd September [56] Choulier D. "Towards a new theory for design activity reasoning", 1st International Conference on Design Creativity, (ICDC2010), Kobe (Japan), November 29(Mon) - December 1(Wed), [57] Choulier D., Forest J., Coatanéa E. "The engineering design CK theory: contributions and limits", 22 nd International Conference on Design Theory and Methodology DTM, Montréal, Quebec, Canada, August 15-18, [58] Coulibaly A., Ostrosi E. A Framework for Assessing the Reliability of Mechatronic Systems, Proceedings of 20 th CIRP Design Conference, pp. 8, publié dans Global Product Development, Alain Bernard (Eds), Springer, pp , Nantes, France, April [59] Ferkha N., Torregrossa D., Mekideche M. R., Miraoui A., Peyraut F., Djerdir A. Influence of geometric parameters upon electromagnetic performance and vibratory behaviour of permanent magnetic machines, EVER 2010, Ecologic vehicles, renewable energies, Monaco, [60] Fougères A.-J., Ospina V.E. "A mediation system to facilitate cooperation in a Co-design platform", Proceedings of the 10th Int. Conf. on Intelligent Systems Design and Applications (ISDA 10), November 29-December 1, Cairo, Egypt, [61] Frey E., Gomes S., Yan X.-T. Numeric chaining of design process information for mechatronic products, 12 th Mechatronics Forum Biennial International Conference, Swiss Federal Institute of Technology ETH, Zurich Switzerland, Proceeding Volume 2, pp , June 28 30, [62] Frey E., Ostrosi E., Gomes S., Roucoules L. Tool based support of collaborative design from specification to CAD modelling, Proceedings of the 8th International Symposium on Tools and Methods of Competitive Engineering (TMCE 2010), April , Ancona, Italy, Published in Tool and Methods of Competitive Engineering, Vol. 2, Edited by Imre Horvath, Ferrucio Mandorli, Zoltan Rusak, Published by Delf University of Technology, Netherlands, pp , [63] Gomes S. "Knowledge Based Engineering for High productive design in PLM environment", Invited conference, CAMT World Seminar Series - Investigating Product Lifecycle Management Practices in EU organizations, Bangkok, July [64] Labed N., Peyraut F., Feng Z.Q., Renaud C. Continuum mechanics analysis of biological soft tissues by an anisotropic hyperelasticity model - Theory and application", 9th World Congress on Computational Mechanics, pp. 52, Sydney, Australia, [65] Lahoud I., Monticolo D., Gomes S. OCEAN: A semantic web service to extract knowledge in E-Groupwares, Knowledge Acquisition Reuse and Evaluation KARE 2010, (SITIS 2010). In conjunction with the fourth IEEE international conference on Signal-Image Technology Internet Based Systems, Kuala Lumpur, Malaysia, 9p, [66] Legardeur J., Choulier D., Monnier B. "New projects evaluation method for the 24h of innovation ", ERIMA 2010, Wiesbaden, Germany, pp , 11-12th June /16

7 [67] Ostrosi E., Coulibaly A., Ferney M. Product modelling for configurable design in advanced CAD system, Proceedings of 20 th CIRP Design Conference, pp. 8, publié dans Global Product Development, Alain Bernard (Eds), Springer, pp , Nantes, France, April [68] Ostrosi E., Min L.-Y., Ferney M. Using consensus evaluation in collaborative and distributed engineering design, Proceedings of IDMME-Virtual Concept 2010, Bordeaux, France, October 20-22, pp.12, [69] Ostrosi E., Roth S., Klein D. Grammars based product modeling and computing in CAD systems, Proceedings of the 8th International Symposium on Tools and Methods of Competitive Engineering (TMCE 2010), Ancona, Italy, Published in Tool and Methods of Competitive Engineering, Vol. 1, Edited by Imre Horvath, Ferrucio Mandorli, Zoltan Rusak, Published by the Faculty of Industrial Design Engineering, Delf University of Technology, Netherlands, pp , [70] Peng J., Fougères A.-J., Deniaud S., Ferney M. An E-Collaborative Learning Environment Based on Dynamic Workflow System, Proceedings of the 9 th Int. Conf. on Information Technology Based Higher Education and Training (ITHET), pp , 29 th April-1st May, Cappadocia, Turkey, /16

8 2009 [71] Coulibaly A., Ostrosi E. An UML Based Approach for Product Architecture Modelling in Design for Configuration Process, 39 th International Conference on Computers & Industrial Engineering (CIE39), Troyes, France, pp.6, [72] Coulibaly A., Ostrosi E., Mohammadian S., Ait-Kadi D. "Mechatronic Products Reliability and Maintainability Assessment using CAD 3D Semantic Model Actes du 8 ème Congrès International de Génie Industriel, Tarbes Canada, pp. 8, [73] Folea M., Schlegel D., Lupulescu N. Compared Machinability of Cobalt Based Superalloy FSX414 during Conventional and High Speed End Milling 20 th DAAAM World Symposium 2009, Intelligent Manufacturing & Automation : Theory, Practice & Education, Vienne, [74] Frey E., Ostrosi E., Gomes S., Roucoules L. "A model to develop multi-domain product taking into account the initial requirements until the modelling and simulation tool, Proceedings of International Conference on Engineering Design, ICED'09', Stanford University, Stanford, CA, USA, pp. 12, [75] Kiani M., Torregrossa D., Simoes M., Peyraut F., Miraoui A. A Novel Maximum Peak Power Tracking Controller for Wind Energy Systems Powered by Induction Generators, Electrical Power and Energy Conference Sustainable/Renewable Energy Systems and Technologies, Montréal, Quebec, Canada, [76] Meyer F., Roth S., Willinger R. Three Years Old Child Head-Neck Finite Element Modeling. Simulation Of The Interaction With Airbag In Frontal And Side Impact, Proc of Enhanced Safety of Vehicle (ESV) conference 2009, Stuttgart, Allemagne, [77] Ostrosi E., Fougères A.-J., Ferney M., Klein D. Distributed Fuzzy Product Configuration Using a Multi-Agent Approach, Proceedings of the 13th IFAC Symposium on Information Control Problems in Manufacturing, (INCOM'09), pp.6., Moscow, Russia, [78] Raul J.S., Roth S., Willinger R. Numerical modelling of the shaken baby syndrome Annual International conference SIM-BIO 2009, Juans Les Pins, France, [79] Roth S., Oudry J., El-Rich M., Shakourzadeh. H. "Influence of mesh density on a finite element model submitted to dynamic loading, Annual International conference SIM-BIO 2009, Juans Les Pins, France, [80] Roth S., Oudry J., El-Rich M., Shakourzadeh H. "Influence of mesh density on a finite element model under dynamic loading", EHTC conference, Ludwigsbourg, Allemagne, [81] Torregrossa D., Peyraut F., Espanet C., Cassat A., Miraoui A. "New Estimation of Electromagnetic Sound Power Radiated By A PM Machine: An Active and Passive Control Guideline", AS Annual Meeting, Houston, Texas, [82] Torregrossa D., Peyraut F., Espanet C., Cassat C., Miraoui A. "A New Passive Methodology for Controlling the Noise in Electrical Machines: Impact of some Parameters on the Modal Analysis, International Electric Machines and drives Conference IEMDC'09', Miami, Florida, /16

9 2008 [83] Baron D., Choulier D., Wéité P.A. A method to elaborate a qualifications framework for a master degree in innovation, 36 th SEFI Annual Conference, Proceedings on CD, abstract p 99, Aalborg, Dannemark, July 2-5, [84] Chamoret D., Harb N., Peyraut F., Gomez S., Chevriau S., Feng Z.-Q. "Finite Element Model for Human Centred-Design, Proceedings of Virtual Concept IDMME 08, Beijing, China, [85] Chamoret D., Qiu K., Labed N., Domaszewski M. Optimization of truss and grillage structures by a non-deterministic method, The Ninth International Conference on Computational Structures Technology, Athens, Greece 2-5 September [86] Choulier D., Wéité P. A. A "baby designers" approach: making trainees sensitive to main notions of collective design in few hours, International conference on engineering and product design education, Barcelona Spain, p , 4-5 september [87] Deciu E., Ostrosi E., Ferney M., Gheorghe M. A configuration grammar design approach for product family modelling in conceptual design, Proceedings of the TMCE 2008, Izmir, Turkey, Published in "Tools and Methods of Competitive Engineering, Edited by I. Horváth and Z. Rusák', pp , [88] Deciu E., Ostrosi E., Ferney M., Gheorghe M. "Design synthesis based on configuration grammars approach for configurable products modelling, Proceedings of the CIRP Design Conference 2008: Design Synthesis, Twente, The Netherlands, April 7-9, [89] Dreyer J.-L. Injektionstechnik beim Spritzgiessen im SKZ, Seminar Gas und Wasser, Würzburg, [90] Folea M., Schlegel D., Lupulescu N-B., Decreuse C., Parv. L. Influence of cutting parameters on surface roughness in end-milling cobalt superalloy FSX414, 2nde Conference on Computing and Solution in Manufacturing Engineering, Brasov, Roumanie, [91] Lamri S., Langlade C., Kermouche G., Noel P., Schlegel D. Development and instrumentation of an original impact test method for materials characterisation, 21 st International Conference on Atomic Physics, ICAP 2008, Storrs Connecticut, USA, [92] Micaelli J.P., Bonjour E., Deniaud S. "Architecture as a key activity of complex systems design, Proceeding of the Crecos Seminary, Helsinki University of Technology, [93] Ospina V., Fougères A.-J. Mediation system for cooperative activities: knowledge system design, Proceedings of the 7 th WSEAS International Conference on Data Networks, Communications, Computers, (DNCOCO,08)', Bucharest, Romania, pp , [94] Ostrosi E., Fougères A.-J., Ferney M. Fuzzy agents to assist collaborative and distributed design for optimal product configuration, Proceedings of DET 5 th International Conference on Digital Enterprise Technology, Nantes, France, [95] Ostrosi E., Haxhiaj L., Ferney M. Configuration Grammars: Powerful tools for Product Modelling in CAD systems, Proceedings of the 15 th ISPE International Conference on Concurrent Engineering (CE2008), Published in Collaborative Product and Service Life Cycle Management for a Sustainable World, Edited by: R. Curran, S-Y Chou, A. Trappey, Springer, Berlin', Belfast, Northern Ireland, pp , [96] Ostrosi E., Movahed-Khah R., Garro O. "An interaction analysis approach for extraction of emergent patterns and organization structures during collaborative and distributed design process, Proceedings of IDMME-Virtual Concept 2008, Beijing, China, [97] Ostrosi E., Ti Bie S., Deciu E., Ferney M. "An integrated approach for optimal product configuration using p-median model, Proceedings of IDMME-Virtual Concept 08, Beijing, China, /16

10 [98] Seichepine J.-L., Faraoun H., Peyraut F., Chandler P., Coddet C., Sellars C., Sporer D., Hertter M. Numerical simulation of the thermomechanical behaviour of thermally sprayed abradable coatings, International Thermal Spray Conference & Exposition (ITSC 2008), Maastricht The Netherlands, /16

11 2007 [99] Chamoret D., Kepeng Q., Labed N., Domaszewski M. Optimization of truss structures by a stochastic method, First International Conference on Multidisciplinary Design Optimization and Applications, Besançon, France, [100] Deciu E., Ostrosi E., Ferney M., Gheorghe M. Configuration grammar-based design approach for product family modelling in advanced CAD systems, Proceedings of the 16 th International Conference on Engineering Design (ICED'07) on CD, and published in Knowledge, Innovation and Sustainability, Editors: Ecole Centrale Paris, Published by the Design Society, pp , Paris, France, [101] Dreyer J.-L. Injektionstechnik beim Spritzgiessen im SKZ, Seminar Gas und Wasser, Würzburg, [102] Durand J., Wéité P.-A., Gazo C., Lutz P. "Determination and evaluation of the possible links and sequences between TRIZ and other design methods, International Conference on Engineering Design, ICED 07', Paris, France, [103] Durand J., Wéité P.-A., Gazo C., Lutz P. "Proposition de passerelles inter-méthodologiques entre la démarche d'invention TRIZ et les autres méthodes de conception», 7 ème Congrès international de génie industriel, Trois-Rivières, Québec, Canada., [104] Feng Z.-Q., Renaud C., He Q.-C., Peyraut F. Finite element analysis of Gent materials under contact/impact conditions, Proceedings of the 5 th European Conference on Constitutive Models for Rubber, ECCMR 2007, pp , Ecole des Mines de Paris, [105] Movahed-Khah R., Ostrosi E., Garro O. «Dynamiques des états-problèmes et des groupes de conception dans la conception collaborative et distribuée», Actes du 7 ème Congrès International de Génie Industriel «L'entreprise innovante en réponse à la mondialisation : Défis et perspectives en génie industriel», Trois-Rivières, Québec, Canada, [106] Ospina V., Fougères A.-J. The mediator: an artificial actor integrated in a cooperative design system, ICCC 2007, pp , Proceedings of the 5 th IEEE International Conference on Computational Cybernetic, Gammarth, Tunisia, [107] Ostrosi E., Ferney M. Computer Aided Consensus Searching System for Collaborative and Distributed Design Process, 4 th International Conference on Product Lifecycle Management (PLM07), published in the book "Product Life Management Assessing the Industrial Relevance Edited by M. Garetti, S. Terzi, P. Ball, and S. Han, Published by Inderscience Enterprises Limited, pp , Milano, Italy, [108] Peyraut F., Labed N., Feng Z.-Q. A numerical approach to enforce the orientation-preserving condition, Proceedings of the 5 th European Conference on Constitutive Models for Rubber, ECCMR 2007, pp , Ecole des Mines de Paris, [109] Peyraut F., Seichepine J.L., Coddet C., Herter M. Issues on minimum hardness against coating's thickness for abradable materials, First International Conference on Multidisciplinary Design Optimization and Applications, Besançon, [110] Racine J., Ostrosi E. "Extraction et analyse de la forme dans le design des voitures françaises.», Actes du 7 ème Congrès International de Génie Industriel "L'entreprise innovante en réponse à la mondialisation : Défis et perspectives en génie industriel», Trois-Rivières, Québec, Canada, [111] Sid B., Peyraut F., Domaszewski M. "A new approach to topology optimization using genetic algorithm and adjacency representation, First International Conference on Multidisciplinary Design Optimization and Applications, Besançon, France, /16

12 2006 [112] Deciu E., Ostrosi E., Fougères A.-J., Ferney M., Gheorghe M. Collaborative and distributed design for product configuration with assisting agents, Proceedings of Virtual Concept 2006, Springer Verlag, Playa Del Carmen, Mexico, November 26 th -december 1 st, [113] Deniaud I., Micaelli J.-P., Deniaud S. Design and deployment of a manufacturing system performance: the reactivity case, Proceedings of the Multiconference on Computational Engineering in Systems Applications, Beijing, China, [114] Elsoufi L., Khalil K., Lachat R., Charon W., Zoaeter M. "Methodology for the manufacture of smart composites with thermoplastic matrix", Cinquième Conférence Internationale sur la Science des Matériaux (CSM5), Beyrouth, Liban, Mai, [115] Fougères A.-J. Assistance to agent-based µ-tools development for a co-operative design platform, Proceedings of Virtual Concept 2006, Springer Verlag, Playa Del Carmen, Mexico, November 26 th -december 1 st, [116] Fougères A.-J., Ostrosi E., Movahed-Khah R., Ferney M. An intelligent system for the interactions analysis in a collaborative design process, Proceedings of Virtual Concept 2006, Springer Verlag, Playa Del Carmen, Mexico, November 26 th -december 1 st, [117] Horrigue A., Choulier D., Boudouh T. Knowledge sharing observation and modelling in distributed design teams in Proc. Int. Design Conference (DESIGN 2006), (CD ROM), Dubrovnik - Croatia, [118] Kuate G., Choulier D., Deniaud S. Framework for attaching design intents to the product CAD model, 6 th Int. Conf. Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2006), Grenoble, France, [119] Kuate G., Choulier D., Deniaud S., Ferney M. Protocol analysis for computer aided design: a model of design activities 6 th Int. Symposium on Tools and Methods of Competitive Engineering (TMCE 2006), April Ljubljana, Slovenia, edited by I. Horvath & J. Duhovnik, Vol. 2, pp , [120] Laroche F., Bernard A., Cotte M., Deniaud S. A new methodology for a new life of old technical machines, CIRP Design Seminar, Alberta, Canada, [121] Lenczner M., Prieur C. Asymptotic model of an active mirror, Proceedings of the 13 th IFAC Workshop on Control Applications of Optimisation, April, Paris - Cachan, France, [122] Movahed-Khah R., Ostrosi E., Garro O. Dynamics of State-Problems and Design Intermediate Objects in Distributed and Collaborative Design Process, Proceedings of the 3 rd International CIRP Conference Digital Enterprise Technology (DET2006), September 2006, Setubal, Portugal, Editors: Pedro F. Cuhna and Paul G. Maropoulos, [123] Nasser M., Lachat R., Borza D., Khalil K., Charon W. "Perturbation de la déformation d une plaque composite contenant des actionneurs piézoélectriques ; comparaison entre mesures et simulations", Cinquième Conférence Internationale sur la Science des Matériaux (CSM5), Beyrouth, Liban, Mai, [124] Ostrosi E., Ferney M. Fuzzy product configuration in advanced CAD systems, Proceedings of the 3 rd International CIRP Conference Digital Enterprise Technology (DET2006), September 2006, Setubal, Portugal, Editors: Pedro F. Cuhna and Paul G. Maropoulos, [125] Sid B., Peyraut F., Domaszewski M. Structural encoding for topology optimization with genetic algorithm, Second Conference on Simulation and Multidisciplinary Design Optimization, Belfort, France, mai, /16

13 2005 [126] Boudouh T. "Modélisation du processus de conception dans un contexte d'ingénierie simultanée", Rencontre Internationale de Mécanique, Université de Blida, Algérie, juin [127] Brassart M., Lenczner M., Gerghu M., A two-scale model for the wave equations with periodic coefficients, II ECCOMAS Thematic Conference, Lisbonne, Portugal, July 2005,. [128] Choulier D., Pena E. "A framework for experimental laboratory experiments", International workshop on studying designers'05 University of Provence, Aix en Provence, October [129] Deniaud I., Micaëlli J-P., Fougères A-J., Déployer et définir de façon collaborative une performance en ingénierie système manufacturière : l'exemple de la réactivité, in Proc. 6e Congrès International de Génie Industriel (CIGI 2005), Besançon, France, 7-10 juin [130] Fougères A.-J. Agent-based micro-tools development for a co-operative design platform, ITI 3rd International Conference on Information and Communication Technology, pp , Cairo, Egypt, December 5-6, [131] Horrigue A., Boudouh T., Ferney M. "Conception collaborative : identification et facteurs de succès", in Proc. 6e Congrès International de Génie Industriel (CIGI 2005), Besançon, France, 7-10 juin [132] Kuate G., Choulier D., Deniaud S., Ferney M. "Intentions de conception et intentions de représentation dans une séquence de conception à l'aide d'un outil CAO", in Proc. 6e Congrès International de Génie Industriel (CIGI 2005), Besançon, France, 7-10 juin [133] Lenczner M., Montseny G., Yakoubi Y. Approximation of distributed control operators on quasi-local architectures, IMACS 2005, july Paris, France, [134] Ospina V., Fougères A.-J. Knowledge modelling for mediation system based on cooperative task: an e-learning application, ITI 3rd International Conference on Information and Communication Technology, pp , Cairo, Egypt, December 5-6, [135] Ostrosi E., Ferney M. Inference of grammars for feature modeling in CAD systems, Proceedings of 12th ISPE International Conference on Concurrent Engineering: Research and Applications (CE 2005), July 25-29, Fort Worth, Texas, [136] Prudhomme G., Brissaud D., Choulier D. Clustering engineering design research: A methodological framework, International Conference on Engineering design (ICED 2005), Melbourne, Australia, [137] Sid B., Domaszewski M., Peyraut F. Topology optimization using an adaptive genetic algorithm and a new geometric representation, OPTI 2005, Ninth International Conference on Computer Aided Optimum Design in Engineering, pp , Skiathos, Greece, May [138] Weite P.-A., Fougères A.-J., Gazo C. Les micro-outils, vecteur d appropriation des nouvelles méthodologies de conception et d innovation, in Proc. 6e Congrès International de Génie Industriel (CIGI 2005), Besançon, France, 7-10 juin /16

14 2004 [139] Anghel D.C., Boudouh T., Garro O., Ungureanu I. Minimizing iteration impacts in the design process, 10th Int. Conf. Concurrent Enterprising (ICE 2004), Seville, Spain, June [140] Boudouh T., Anghel D.C., Garro O. An experimental study of iterations in the design process, 5th Int. Conf. Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2004), Bath, UK, April 5-7, [141] Boudouh T., Anghel D.C., Garro O. Design iterations in a geographically distributed design process, in Proc. Int. CIRP Design Seminar, Cairo, Egypt, may [142] Boudouh T. Le processus de conception : modélisation et performances, Conf. Int. de Mécanique Avancée (CIMA 2004), Boumerdès, Algérie, [143] Bozon C., Decreuse C., Maranzana R., Garro O. Manufacturing knowledge integration in CAD-CAM context, 5th Int. Conf. Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2004),Bath, UK, April 5-7, [144] Choulier D., Garro O., Pena E. Design acts the analysis of cooperative experiment, COOP 04, Hyères may, [145] Choulier D. Couples of design acts, a way for identifying elementary design tasks, Int. CIRP Design Seminar, Cairo, Egypt, may [146] Deciu E.R., Ostrosi E., Ferney M., Gheorghe M., Configurable product design using multiple fuzzy models, Proc. of the 5th Tools and Methods of Competitive Engineering (TMCE 2004), April , Lausanne, Switzerland, Published in Tool and Methods of Competitive Engineering, Vol. 1, [147] Fougères A.-J., Recchione M., Gomez Y. PLACID : Une Plate-forme pour Coopérer en Conception Distribuée, Conférence Internationale Sciences Electronique, Technologies de l Information et des Télécommunications (SETIT 2004), Sousse, Tunisie, mars [148] Fougères A.-J., Ospina V., Canalda P. Conception de système de multi-assistance à base d agents. Application à un environnement pédagogique, Conférence Internationale Sciences Electronique, Technologies de l Information et des Télécommunications (SETIT 2004), Sousse, Tunisie, mars [149] Fougères A.-J. Du langage naturel à la spécification - Application à la spécification de services de télécommunication, Conférence Internationale Sciences Electroniques, Technologies de l Information et des Télécommunications (SETIT 2004), Sousse, Tunisie, mars [150] Fougères A.-J. Agents to cooperate in distributed design, in Proc. International Conference on Systems, Man and Cybernetics (SMC 04), The Hague, Netherlands, ISBN: , pp , October 10-13, [151] Fougères A.-J., Ospina V. Un système de médiation pour la gestion et le suivi de projets d étudiants, Actes du Colloque International Technologies de l Information et de la Connaissance dans l Enseignement Supérieur et l Industrie (TICE 2004), ISBN : , Compiègne, octobre [152] Horrigue A., Boudouh T., Micaëlli J.-P., Ferney M. La conception collaborative : éléments d analyse, Conf. Int. de Mécanique Avancée (CIMA 2004), Boumerdès, Algérie, 2004 (CD ROM). [153] Lachat R., Borza D., Charon W. "Manufacture of smart composite panels for the industry and verification of their structural properties with holographic methods" - 12th International conference on Experimental Mechanics - 29 August-2 September, Bari, Italy. [154] Movahedkhah R., Ostrosi E., Garro O. An approach based on the communicative traces for the collaborative design process analysis, Proceedings of the 6th International Conference on the Design of Cooperative System (COOP04) Scenario-Based Design of Cooperative Systems, pp , May 2004, Hyères, France, /16

15 [155] Movahedkhah R., Ostrosi E., Garro O. A two-levels based approach for collaborative design process analysis, Proceedings of the 14th International Design Seminar (CIRP04), Design in Global Village, pp. 1-12, Cairo, Egypt, May [156] Ostrosi E., Ferney M., Deciu E., Garro O. Feature-based reasoning for designing structural configuration in advanced CAD systems, 5th Int. Conf. Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2004) Bath, UK, April 5-7, [157] Ostrosi E., Ferney M. A grammar based approach for feature modelling in CAD, First International Conference on Design Computing and Cognition (DCC 04), July 17-21, Massachusetts Institute of Technology (MIT), Cambridge, USA, [158] Ostrosi E., Ferney M. Collaborative and distributed design process analysis for intelligent implementation, Proc. of 11th ISPE International Conference on Concurrent Engineering: Research and Applications (CE 2004), pp , July 26-30, Beijing, [159] Pena E., Choulier D., Garro O. Phases of the design process considering workspaces and cooperation notions, Int. CIRP Design Seminar, Cairo, Egypt, may [160] Peyraut F., Feng Z.-Q., Labed N. A General Convergence Condition of the Newton-Raphson Algorithm Applied to Compressible Hyperelasticity, Sixth World Congress on Computational Mechanics (WCCM VI) in conjunction with the Second Asian-Pacific Congress on Computational Mechanics (APCOM'04), Vol. II, pp. 29, China, Sept. 5-10, [161] Slavila C., Decreuse C, Ferney M., Ungureanu I. Maintainability evaluation during the design phase, 5th Int. Conf. Integrated Design and Manufacturing in Mechanical Engineering (IDMME 2004), Bath, UK, April 5-7, [162] Slavila C., Decreuse C., Ferney M., Ungureanu I. Maintainability evaluation using fuzzy design data Int. CIRP Design Seminar, Cairo, Egypt, may [163] Slavila C., Decreuse C., Ferney. M., Ungureanu I. Integrating Maintainability Evaluation in the Design Process, 10th Int. Conf. Concurrent Enterprising (ICE 2004), Seville, Spain, June [164] Weite P.-A., Choulier D., Picard F. Stakes, criteria and proposals for a training to innovating design, Int. CIRP Design Seminar, Cairo, Egypt, may /16

16 2003 [165] Arrouf M., Charon W., Peyraut F. «Couplage logique floue - algorithme de recherche de pointselle pour l optimisation de systèmes adaptatifs», CIMNA I, 1 er Congrès International sur les Modélisations Numériques Appliquées, Beyrouth, Liban, novembre [166] Canalda P., Fougères A.-J., Chatonnay P., Baala O. ipedagogique : une application d apprentissage multi-usages intégrant une pédagogie de projets tuteurés basée sur la synchronisation de fragments de procédés coopératifs, Conférence Internationale Sciences Electronique, Technologies de l Information et des Télécommunications (SETIT 2003), Sousse, Tunisie, mars [167] Cotte M., Deniaud S. Restitution of old machines by the today mechanical CAD tool, 30th International Symposium of the International Committee for the History of Technology (ICOHTEC 03), St Petersbourg, Moscou (Russie), août [168] Deciu E.R., Ostrosi E., Ferney M., Gheorghe M. "Configuration design of product families based on features". Proc. of 10th ISPE International Conference on Concurrent Engineering: Research and Applications (CE 2003), pp , Madeira, Portugal, juillet [169] Deciu E.R., Ostrosi E., Ferney M., Gheorghe M. Configuration of product families using fuzzy set approach, Proc. of the 14th International Conference on Engineering Design (ICED 03), Stockholm, Sweden, Août [170] Filipas I., Micaëlli J.-P. Designing a performance evaluation system, a structured & diagrammatic approach, Proc. of 10th ISPE International Conference on Concurrent Engineering: Research and Applications (CE 2003), Madeira, Portugal, July, [171] Fougères A.-J. Modèle de communication pour des agents d assistance dans les systèmes complexes, Conférence Internationale Sciences Electronique, Technologies de l Information et des Télécommunications (SETIT 2003), Sousse, Tunisie, mars [172] Miled F., Choulier D., Ferney M. Cooperative tools for specification and modeling of complex systems, International CIRP Design Seminar, Methods and tools for Co-operative and Integrated Design, Grenoble, mai [173] Miled F., Brinzei N., Ferney M. Specification and Modelling of Hybrid Systems: an UML and Petri Nets Integrated approach, Proc. of the 14th International Conference on Engineering Design (ICED 03), Stockholm, Sweden, Août [174] Ostrosi E., Tautrim J., Ferney M., Garro O. A Fractal Organisation approach for Concurrent Design, Proc. of the 14th International Conference on Engineering Design (ICED 03), Stockholm, Sweden, August [175] Pena E., Choulier D., Garro O. A proposition to capitalize and share the logic of design, 2003 International CIRP Design Seminar, Methods and tools for Co-operative and Integrated Design, Grenoble, May [176] Peyraut F., Labed N. «Divergence of arc-length method in the case of a compressible hyperelastic cube subjected to a compressive pressure», CIMNA I, 1 er Congrès International sur les Modélisations Numériques Appliquées, Beyrouth, Liban, novembre [177] Schlegel D., Deniaud S., Ferney M. An experiment to understand how designers consider maintenance, 10th ISPE International Conference on Concurrent Engineering: Research and Applications (CE 2003), Madeira Island (Portugal), July [178] Tautrim J., Ostrosi E., Ferney M. Lean Manufacturing and Business Design Architecture: Efficient and effective implementation of lean manufacturing engineering, Proc. of the International Conference on Industrial Engineering and Production Management (IEPM 2003), Porto, Portugal, May /16

Linh-Chi VO Professor

Linh-Chi VO Professor Linh-Chi VO Professor Teaching Area/s: Strategy and Marketing Year hired at ISC Paris: 2010 Full-time Grande Ecole and MBA Participating Education: Degree Institution Year Major / Minor Post Doctorate

More information

Mechanics and Industry. Langmuir Langmuir. Engineering Fracture Mechanics

Mechanics and Industry. Langmuir Langmuir. Engineering Fracture Mechanics Engineering Fracture Mechanics International Journal of Hydrogen Energy Materials and Design Mechanics and Industry Physic Letters Technical Langmuir Langmuir Theoretical and Applied Fracture Mechanics

More information

Brief description of the paper/report. Identification

Brief description of the paper/report. Identification Brief description of the paper/report Argument Original reference A holonic framework for coordination and optimization in oil and gas production complexes E. Chacon, I. Besembel, Univ. Los Andes, Mérida,

More information

Main research topics. Main teaching topics. Continuum mechanics Structural vibrations Structural analysis by FEM Composite materials

Main research topics. Main teaching topics. Continuum mechanics Structural vibrations Structural analysis by FEM Composite materials Dr Frédéric Dau I2M laboratory (UMR 5295), Dept. of Durability Materials Assemblies Structures ENSAM Engineering school, France Associate Professor Univ. Laval, Québec, Canada. frederic.dau@ensam.eu /

More information

A Constraints Driven Product Lifecycle Management Framework

A Constraints Driven Product Lifecycle Management Framework A Constraints Driven Product Lifecycle Management Framework Julien Le Duigou 1, 2, Alain Bernard 1, Nicolas Perry 3, Jean-Charles Delplace 2 1 IRCCyN, Ecole Centrale de Nantes, 1 rue de la Noë, 44321 Nantes

More information

«Introduction to the Seminar on EMR»

«Introduction to the Seminar on EMR» Seminar On EMR Sept. 2014 Seminar Sept. 2014 Energetic Macroscopic Representation «Introduction to the Seminar on EMR» Prof. A. Bouscayrol University Lille1, L2EP, MEGEVH, France Dr. Philippe Barrade LEI,

More information

Guide. Axis Webinar. User guide

Guide. Axis Webinar. User guide Guide Axis Webinar User guide Table of contents 1. Introduction 3 2. Preparations 3 2.1 Joining the visual part 3 2.2 Joining the conference call 3 2.3 Providing feedback and asking questions during a

More information

Il est repris ci-dessous sans aucune complétude - quelques éléments de cet article, dont il est fait des citations (texte entre guillemets).

Il est repris ci-dessous sans aucune complétude - quelques éléments de cet article, dont il est fait des citations (texte entre guillemets). Modélisation déclarative et sémantique, ontologies, assemblage et intégration de modèles, génération de code Declarative and semantic modelling, ontologies, model linking and integration, code generation

More information

THINK Global: Risk and return

THINK Global: Risk and return Changing context of real estate returns in a globalised world Data generating art This document is solely for the use of professionals and is not for general public distribution. Using data from Fig.1

More information

Multi-Agent Architecture for Implementation of ITIL Processes: Case of Incident Management Process

Multi-Agent Architecture for Implementation of ITIL Processes: Case of Incident Management Process Multi-Agent Architecture for Implementation of ITIL Processes: Case of Incident Management Process Youssef SEKHARA, Hicham MEDROMI, Adil SAYOUTI Equipe Architectures des Systèmes (EAS), Laboratoire d Informatique,

More information

Guide. Axis Webinar User Guide

Guide. Axis Webinar User Guide Guide Axis Webinar User Guide Introduction Joining an Axis Webinar is a quick and easy way to gain additional knowledge about more than just new products, and technology. These webinars allow attendees

More information

Christine DI MARTINELLY

Christine DI MARTINELLY 26/08/2015 Christine DI MARTINELLY Ph.D. in Economic and Management Sciences Assistant Professor IÉSEG School of Management, Operations c.dimartinelly@ieseg.fr EDUCATION 2008 2008 2003 2001 Ph.D. in Applied

More information

New Thermal Architecture For Future Green Data Centres

New Thermal Architecture For Future Green Data Centres New Thermal Architecture For Future Green Data Centres S. Le Masson, D. Nörtershäuser France Télécom R&D 2, Av Pierre Marzin 22300 Lannion FRANCE stephane.lemasson@orange-ftgroup.com ; david.nortershauser@orange-ftgroup.com,

More information

Ann-Charlotte TEGLBORG Department: Entrepreneurship and Innovation

Ann-Charlotte TEGLBORG Department: Entrepreneurship and Innovation Ann-Charlotte TEGLBORG Department: Entrepreneurship and Innovation Biography Ann-Charlotte TEGLBORG hold her Ph.D. in December 2010 at Paris I- Sorbonne (IAE). Her research interest focuses on democratization

More information

SIM_ZONAL: SOFTWARE EVALUATING INDOOR TEMPERATURE DISTRIBUTIONS AND AIR MOVEMENTS FOR RAPID APPRAISALS - FIRST APPLICATION TO AN CELL.

SIM_ZONAL: SOFTWARE EVALUATING INDOOR TEMPERATURE DISTRIBUTIONS AND AIR MOVEMENTS FOR RAPID APPRAISALS - FIRST APPLICATION TO AN CELL. Seventh International IBPSA Conference Rio de Janeiro, Brazil August 13-15, 2001 SIM_ZONAL: SOFTWARE EVALUATING INDOOR TEMPERATURE DISTRIBUTIONS AND AIR MOVEMENTS FOR RAPID APPRAISALS - FIRST APPLICATION

More information

Hakim AKEB Management and Information Systems Department

Hakim AKEB Management and Information Systems Department Management and Information Systems Department Teaching Area/s: Business Intelligence, Computer Science, Marketing and Management of Information Technologies Year hired at ISC Paris: 2007 Grande Ecole Full-Time:

More information

Scientific publications of Dr. Giovanni Celano, PhD. International Conferences Updated to November 2011

Scientific publications of Dr. Giovanni Celano, PhD. International Conferences Updated to November 2011 [1] G. Celano and S. Fichera, 1999, Statistical economic design of a x control chart, 5th Intern. Conf. on Advanced Manufacturing Systems and Technology (AMST00), pp. 875-882, Udine (Italy), June 3-4,

More information

Curriculum Vitae. 1 Person Dr. Horst O. Bunke, Prof. Em. Date of birth July 30, 1949 Place of birth Langenzenn, Germany Citizenship Swiss and German

Curriculum Vitae. 1 Person Dr. Horst O. Bunke, Prof. Em. Date of birth July 30, 1949 Place of birth Langenzenn, Germany Citizenship Swiss and German Curriculum Vitae 1 Person Name Dr. Horst O. Bunke, Prof. Em. Date of birth July 30, 1949 Place of birth Langenzenn, Germany Citizenship Swiss and German 2 Education 1974 Dipl.-Inf. Degree from the University

More information

CAD/CAE interoperability, an automatic generation of Analysis Model based on idealization of CAD geometry

CAD/CAE interoperability, an automatic generation of Analysis Model based on idealization of CAD geometry CAD/CAE interoperability, an automatic generation of Analysis Model based on idealization of CAD geometry M. HAMDI a, N. AIFAOUI a, B. LOUHICHI a, A. BENAMARA a a. Laboratoire de Génie Mécanique Lab-Ma-05,

More information

A Contribution to Expert Decision-based Virtual Product Development

A Contribution to Expert Decision-based Virtual Product Development A Contribution to Expert Decision-based Virtual Product Development László Horváth, Imre J. Rudas Institute of Intelligent Engineering Systems, John von Neumann Faculty of Informatics, Óbuda University,

More information

Curriculum Vitæ of Olivier LAMOTTE

Curriculum Vitæ of Olivier LAMOTTE UNIVERSITÉ DE TECHNOLOGIE DE BELFORT-MONTBÉLIARD Curriculum Vitæ of Olivier LAMOTTE OLIVIER LAMOTTE Ref.: CV-LAMOTTE-EN-2015-I2 Ver.: 1.0 Date: 2015/08/24 Status: Public Laboratoire Systèmes et Transports

More information

MODELLING, AUTHORING AND PUBLISHING THE DOCUMENT ANALYSIS LEARNING OBJECT

MODELLING, AUTHORING AND PUBLISHING THE DOCUMENT ANALYSIS LEARNING OBJECT MODELLING, AUTHORING AND PUBLISHING THE DOCUMENT ANALYSIS LEARNING OBJECT Alexandre Flament (alexandre.flament@imag.fr) Emmanuelle Villiot-Leclercq (emmanuelle.villiot-leclercq@imag.fr) Laboratoire CLIPS,

More information

Belgium 2006. Continual Education BHPA Spring CE Positron Emission Tomography April 25 1/2 day St-Luc Brussels 4

Belgium 2006. Continual Education BHPA Spring CE Positron Emission Tomography April 25 1/2 day St-Luc Brussels 4 Belgium 2006 Conferences BHPA 2006 Symposium Physics in Medicine in the 21st century : January 20-21 2 days Ghent 16 new techniques, challenges, problems and solutions Continual Education BHPA Spring CE

More information

Poznan University of Technology Faculty of Electrical Engineering

Poznan University of Technology Faculty of Electrical Engineering Poznan University of Technology Faculty of Electrical Engineering Contact Person: Pawel Kolwicz Vice-Dean Faculty of Electrical Engineering pawel.kolwicz@put.poznan.pl List of Modules Academic Year: 2015/16

More information

Dynamic Case-Based Reasoning Based on the Multi-Agent Systems: Individualized Follow-Up of Learners in Distance Learning

Dynamic Case-Based Reasoning Based on the Multi-Agent Systems: Individualized Follow-Up of Learners in Distance Learning Dynamic Case-Based Reasoning Based on the Multi-Agent Systems: Individualized Follow-Up of Learners in Distance Learning 1, 2 A. Zouhair, 1 E. M. En-Naimi, 1 B. Amami, 2 H. Boukachour, 2 P. Person, 2 C.

More information

Global Network Access International Access Rates

Global Network Access International Access Rates Global Network Access International Access Rates We know that you need to communicate with your partners, colleagues and customers around the world. We make every effort to understand the difficulties

More information

Noel ALBERT. Assistant Professor of Marketing KEDGE BUSINESS SCHOOL KEDGE +33 4 91 82 73 39 noel.albert@kedgebs.com EDUCATION

Noel ALBERT. Assistant Professor of Marketing KEDGE BUSINESS SCHOOL KEDGE +33 4 91 82 73 39 noel.albert@kedgebs.com EDUCATION Noel ALBERT Assistant Professor of Marketing KEDGE BUSINESS SCHOOL KEDGE +33 4 91 82 73 39 noel.albert@kedgebs.com EDUCATION 2009 2004 2003 Ph.D. [Marketing] University of Grenoble (France) Postgraduate

More information

Extracting Business. Value From CAD. Model Data. Transformation. Sreeram Bhaskara The Boeing Company. Sridhar Natarajan Tata Consultancy Services Ltd.

Extracting Business. Value From CAD. Model Data. Transformation. Sreeram Bhaskara The Boeing Company. Sridhar Natarajan Tata Consultancy Services Ltd. Extracting Business Value From CAD Model Data Transformation Sreeram Bhaskara The Boeing Company Sridhar Natarajan Tata Consultancy Services Ltd. GPDIS_2014.ppt 1 Contents Data in CAD Models Data Structures

More information

Noel ALBERT. Assistant Professor of Marketing

Noel ALBERT. Assistant Professor of Marketing Noel ALBERT Assistant Professor of Marketing BP 921 13288 Marseille cedex 9 France +33 (0) 4 91 82 73 39 noel.albert@kedgebs.com EXPERIENCES AT EUROMED MARSEILLE Courses taught 2011 2013 Research Method,

More information

n.d. Propositions préliminaires pour la Constitution de la Fédération Internationale des Architectes Paysagistes 5-6

n.d. Propositions préliminaires pour la Constitution de la Fédération Internationale des Architectes Paysagistes 5-6 BIBLIOTHEQUE RENE PECHERE - RENE PECHERE LIBRARY Fonds IFLA - IFLA Archives Livres d or reliés - Bound Golden Books INVENTAIRE INVENTORY Livre I - Book I «I.F.L.A. 1948-1968» Création de l IFLA - IFLA

More information

Personal resumé / Renseignements personnels DEMERENS Frédéric, PhD

Personal resumé / Renseignements personnels DEMERENS Frédéric, PhD Name and academic title Professor of Grade held in the institution Field of expertise Teaching department Function/position held in the institution Mail, tel., fax Personal resumé / Renseignements personnels

More information

SunGard Best Practice Guide

SunGard Best Practice Guide SunGard Best Practice Guide What Number Should I Use? www.intercalleurope.com Information Hotline 0871 7000 170 +44 (0)1452 546742 conferencing@intercalleurope.com Reservations 0870 043 4167 +44 (0)1452

More information

Al- Madares Street Phone: +961 79 19 01 03 HONORS HONORS

Al- Madares Street Phone: +961 79 19 01 03 HONORS HONORS MIRVAT ABDALLAH Born in Chehim, Lebanon on June 19 th, 1985 Address: Bchamoun Email: mirvat.abdallah@hotmail.com Al- Madares Street Phone: +961 79 19 01 03 EDUCATIONS UNIVERSITY OF LILLE1, FRANCE & PH.D

More information

Rail research Successes and challenges

Rail research Successes and challenges Rail research Successes and challenges DEUFRAKO 30 ans de coopération francoallemande dans le domaine de la recherche sur les transports Alain Le Guellec, SNCF Direction de l Innovation et de la Recherche

More information

BPMN Process Design for Complex Product Development and Production

BPMN Process Design for Complex Product Development and Production BPMN Process Design for Complex Development and ion Dieter Roller, Erik Engesser Institute of Computer-aided Development Systems Universität Stuttgart Universitätsstrasse 38 D-70569 Stuttgart, Germany

More information

Standardization of Components, Products and Processes with Data Mining

Standardization of Components, Products and Processes with Data Mining B. Agard and A. Kusiak, Standardization of Components, Products and Processes with Data Mining, International Conference on Production Research Americas 2004, Santiago, Chile, August 1-4, 2004. Standardization

More information

Thomas Jeanjean. 2008 Associate Professor of Accounting, HEC School of Management

Thomas Jeanjean. 2008 Associate Professor of Accounting, HEC School of Management Thomas Jeanjean D ETAILS HEC School of Management 1 rue de la Libération 78351 Jouy-en-Josas CEDEX FRANCE Email: jeanjean@hec.fr Office tel: +33 1 39 67 72 86 French citizenship Married, three children

More information

Knowledge territories, Open innovation and the Joint assets issue

Knowledge territories, Open innovation and the Joint assets issue Knowledge territories, Open innovation and the Joint assets issue Ahmed Bounfour European Chair on Intellectual Capital Management University Paris-Sud Ahmed.bounfour@u-psud.fr 1- Knowledge territory as

More information

Office Rents map EUROPE, MIDDLE EAST AND AFRICA. Accelerating success.

Office Rents map EUROPE, MIDDLE EAST AND AFRICA. Accelerating success. Office Rents map EUROPE, MIDDLE EAST AND AFRICA Accelerating success. FINLAND EMEA Office Rents H2 212 NORWAY Oslo 38.3 5.4% 7.% 295, SWEDEN Stockholm 44.7 4.5% 3.% 5, Tallinn 13.4 44,2 21. 5.25% 1.% 12,

More information

Business Process Modelling Languages, Goals and Variabilities

Business Process Modelling Languages, Goals and Variabilities Business Process Modelling Languages, Goals and Variabilities Birgit Korherr Women s Postgraduate College for Internet Technologies Institute of Software Technology and Interactive Systems Vienna University

More information

41 T Korea, Rep. 52.3. 42 T Netherlands 51.4. 43 T Japan 51.1. 44 E Bulgaria 51.1. 45 T Argentina 50.8. 46 T Czech Republic 50.4. 47 T Greece 50.

41 T Korea, Rep. 52.3. 42 T Netherlands 51.4. 43 T Japan 51.1. 44 E Bulgaria 51.1. 45 T Argentina 50.8. 46 T Czech Republic 50.4. 47 T Greece 50. Overall Results Climate Change Performance Index 2012 Table 1 Rank Country Score** Partial Score Tendency Trend Level Policy 1* Rank Country Score** Partial Score Tendency Trend Level Policy 21 - Egypt***

More information

Overview IEA SHC. Implementing Agreement Day of Belgium A. DE HERDE. SPF Economie A. De Herde 07.02.2013 IEA 15.11.1974 IMPLEMENTING AGREEMENTS

Overview IEA SHC. Implementing Agreement Day of Belgium A. DE HERDE. SPF Economie A. De Herde 07.02.2013 IEA 15.11.1974 IMPLEMENTING AGREEMENTS Overview IEA SHC Implementing Agreement Day of Belgium A. DE HERDE 1 IEA 15.11.1974 IMPLEMENTING AGREEMENTS - Fossil Fuels - Renewables SHC http://www.iea-shc.org - Energy end-use: buildings ECBCS - Transfer

More information

Industry Service Line 9 ABeam Consulting has developed a proprietary network utilizing the strengths of being Asia based. We provide service that fits the local conditions to clients in every region and

More information

List of publications and communications

List of publications and communications List of publications and communications Arnaud Dessein March 2, 2013 Chapters in books [1] Arnaud Dessein, Arshia Cont, and Guillaume Lemaitre. Real-time detection of overlapping sound events with non-negative

More information

Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology

Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology Dimitrios Sofialidis Technical Manager, SimTec Ltd. Mechanical Engineer, PhD PRACE Autumn School 2013 - Industry

More information

Sujets «ITS» du défi Transport 2015 Horizon 2020

Sujets «ITS» du défi Transport 2015 Horizon 2020 Session d information sur les ITS 24 février 2015 Sujets «ITS» du défi Transport 2015 Horizon 2020 Patrick Malléjacq, coordinateur du PCN Transport Institut français des sciences et technologies des transports,

More information

Title ISSN SJR H index Country Foundations and Trends in Information 1554 1 Retrieval

Title ISSN SJR H index Country Foundations and Trends in Information 1554 1 Retrieval Title ISSN SJR H index Country Foundations and Trends in Information 1554 1 Retrieval 0677 Q1 6,536 12 United States 2 Swarm and Evolutionary Computation 2210 6502 Q1 3,364 8 Netherlands 3 IEEE Transactions

More information

Comparison between purely statistical and multi-agent based approaches for occupant behaviour modeling in buildings

Comparison between purely statistical and multi-agent based approaches for occupant behaviour modeling in buildings Comparison between purely statistical and multi-agent based approaches for occupant behaviour modeling in buildings Khadija Tijani 1,2,Ayesha Kashif 1,3,Quoc Dung Ngo 1,Stéphane Ploix 1,Benjamin Haas 2,Julie

More information

CURRICULUM VITAE. April 26 th 1977, Sidi Bouzid - Tunisia

CURRICULUM VITAE. April 26 th 1977, Sidi Bouzid - Tunisia Name: Date and place of birth: Nationality: CURRICULUM VITAE Kamel Guedri April 26 th 1977, Sidi Bouzid - Tunisia Tunisian Marital status: Married (children: 3) Position: Assistant Professor Department:

More information

Liste des publications et communications A. Publications dans des revues internationales à comité de lecture

Liste des publications et communications A. Publications dans des revues internationales à comité de lecture Liste des publications et communications A. Publications dans des revues internationales à comité de lecture A1. J. Bouyer and M. Fillon, An experimental analysis of misalignment effects on hydrodynamic

More information

Design & Technology HUB to Europe International education Culture & history Finance Art & Fashion World Exposition centre - Expo 2015 Engine of

Design & Technology HUB to Europe International education Culture & history Finance Art & Fashion World Exposition centre - Expo 2015 Engine of Università Bocconi Italy at a glance Founding member of EU Actual President of the EU Council (2014) Member of G8 Centre of excellence for talented investors Fashion and technical innovation World s largest

More information

Scientific Curriculum Vitæ

Scientific Curriculum Vitæ Scientific Curriculum Vitæ Nicolas PRONOST Teaching Assistant in Computer Science in the Bunraku Project of the IRISA Laboratory (Rennes, France) until August, 1st 2007. Field of expertise: Computer animation

More information

> 09/ 2010 : Université Claude Bernard Lyon 1, IUT Lyon 1, département de Génie Civil

> 09/ 2010 : Université Claude Bernard Lyon 1, IUT Lyon 1, département de Génie Civil Xuan Hong VU Nom / Last Name : VU Prénom / First Name : Xuan Hong Maître de Conférences Docteur en Génie Civil [Associate Professor, Doctor in Civil Engineering] Université Claude Bernard Lyon 1 IUT Lyon

More information

Marc R. BRADFORD Professor

Marc R. BRADFORD Professor Marc R. BRADFORD Professor Teaching Areas: Corporate and Structured Finance, Project and Asset Finance, Global Finance Year hired at ISC Paris: 1993 Full-Time Participating Grande Ecole and MBA Education:

More information

Curriculum Vitae HAYTHAM ELGHAZEL. Education :

Curriculum Vitae HAYTHAM ELGHAZEL. Education : Curriculum Vitae HAYTHAM ELGHAZEL Address: Université Lyon 1, UFR Informatique 43 bd du 11 novembre 1918, 69622 Villeurbanne Cedex, e Mail: elghazel@bat710.univ lyon1.fr Web: http://www710.univ lyon1.fr/~elghazel/

More information

AUTOMOTIVE ENGINEERING UNIVERSITY OF LIEGE

AUTOMOTIVE ENGINEERING UNIVERSITY OF LIEGE AUTOMOTIVE ENGINEERING UNIVERSITY OF LIEGE Pierre DUYSINX University of Liège Automotive Engineering OUTLINE INTRODUCTION University of Liège Aerospace & Mechanics Department SIMULATION & OPTIMIZATION

More information

Account Manager H/F - CDI - France

Account Manager H/F - CDI - France Account Manager H/F - CDI - France La société Fondée en 2007, Dolead est un acteur majeur et innovant dans l univers de la publicité sur Internet. En 2013, Dolead a réalisé un chiffre d affaires de près

More information

Alexandre Dolgui, PhD, DrHabil

Alexandre Dolgui, PhD, DrHabil Alexandre Dolgui, PhD, DrHabil Full Professor of Exceptional Class Deputy Director for Research of Institute Henri Fayol / Director of Laboratory for Information Science and Technology Born in Borisov,

More information

T&E. Where Business Travelers Spend Money

T&E. Where Business Travelers Spend Money T&E Where Business Travelers Spend Money Contents Introduction 3 Key Findings 4 Top Expensive Cities for Business Travel 5 International 5 U.S. 5 Top 10 Spend Categories 6 International 6 U.S. 7 Most Visited

More information

Bachelor of Arts Honours degree Specialisation in French and English, language, literature and philosophy University of Exeter (England) 1983

Bachelor of Arts Honours degree Specialisation in French and English, language, literature and philosophy University of Exeter (England) 1983 Caroline Pulfrey Qualifications PhD in Social Psychology 2010 Research Theme: Capitalism in the Classroom : The impact of self-enhancement values and normative assessment on student motivation, goals and

More information

9 th BIM/Bienniale of Moving Image, Centre pour l image contemporaine, Genève, Switzerland.

9 th BIM/Bienniale of Moving Image, Centre pour l image contemporaine, Genève, Switzerland. Pierre Coulibeuf Festivals (sélection) 1990 1 st International Art Film Biennial, Centre Pompidou, Paris, France. 1992 33 rd Festival dei Popoli, Firenze, Italy. 2 nd International Art Film Biennial, Centre

More information

Marie KOULIKOFF-SOUVIRON. Management of Projects, Information Systems and Supply Chains Sophia-Antipolis

Marie KOULIKOFF-SOUVIRON. Management of Projects, Information Systems and Supply Chains Sophia-Antipolis Marie KOULIKOFF-SOUVIRON Management of Projects, Information Systems and Supply Chains Sophia-Antipolis CV Biography: MARIE KOULIKOFF-SOUVIRON is permanent Professor of Supply Chain Management at SKEMA

More information

Concevoir par l optimisation numérique Application à la fabrication additive

Concevoir par l optimisation numérique Application à la fabrication additive Concevoir par l optimisation numérique Application à la fabrication additive Jean-Pierre ROUX Innovation Intelligence Altair Engineering France jproux@altair.com 1 About Us We help businesses succeed through

More information

Welcome to: M2R Informatique & MoSIG Master of ScienceSep. in Informatics 18, 2009 Joseph 1 / 1Fou

Welcome to: M2R Informatique & MoSIG Master of ScienceSep. in Informatics 18, 2009 Joseph 1 / 1Fou Welcome to: M2R Informatique & MoSIG Master of Science in Informatics Joseph Fourier University of Grenoble & Grenoble INP UFR IMAG http://www-ufrima.imag.fr & ENSIMAG http://ensimag.grenoble-inp.fr Sep.

More information

Bienvenue au Forum Vector 2007

Bienvenue au Forum Vector 2007 insert Insert picture and 8cm click x 7cm Align Title Graphic. Bienvenue au Forum Vector 2007 Henri Belda Vector France V2.1 2005-07-27 insert Insert picture and 8cm click x 7cm Align Title Graphic. Vector

More information

Kathleen Randerson, PhD

Kathleen Randerson, PhD Kathleen Randerson, PhD Grenoble, France kathleenranderson@yahoo.fr Entrepreneurship, International Business, HRM, Family Entrepreneurship Cell phone (33) 6 14 24 52 28 fr.linkedin.com/pub/kathleenranderson-phd/21/5a4/522/en

More information

Curriculum Vitae. Géraldine Heilporn

Curriculum Vitae. Géraldine Heilporn Curriculum Vitae Géraldine Heilporn Géraldine HEILPORN Email: geraldine.heilporn@hec.ca Web: http://homepages.ulb.ac.be/ gheilpor/ Citizenship: Belgian. Permanent resident of Canada since May, 2008 Education

More information

Specification of a generic PLM system dedicated to SMEs based on a PPRO meta-model

Specification of a generic PLM system dedicated to SMEs based on a PPRO meta-model Specification of a generic PLM system dedicated to SMEs based on a PPRO meta-model Julien Le Duigou 1, 2, Alain Bernard 1, Nicolas Perry 3, Jean-Charles Delplace 2 1 IRCCyN, Ecole Centrale de Nantes, France

More information

We would appreciate your help in disseminating this announcement to any institution in your country in the field of physics and optic.

We would appreciate your help in disseminating this announcement to any institution in your country in the field of physics and optic. Dear colleagues, Please find enclosed a short project description from Limoges University : they are preparing a Tempus project in the field of electronics and optic with Algerian universities. They are

More information

Victoria Kostina Curriculum Vitae - September 6, 2015 Page 1 of 5. Victoria Kostina

Victoria Kostina Curriculum Vitae - September 6, 2015 Page 1 of 5. Victoria Kostina Victoria Kostina Curriculum Vitae - September 6, 2015 Page 1 of 5 Victoria Kostina Department of Electrical Engineering www.caltech.edu/~vkostina California Institute of Technology, CA 91125 vkostina@caltech.edu

More information

HSE HR Circular 005/2010 12 th February 2010.

HSE HR Circular 005/2010 12 th February 2010. Office of the National Director of Human Resources Health Service Executive Dr. Steevens Hospital Dublin 8 HSE HR Circular 005/2010 12 th February 2010. To: Each Member of Management Team, HSE; Each Regional

More information

Towards Service-Oriented Systems and Cloud Computing Environments

Towards Service-Oriented Systems and Cloud Computing Environments Towards Service-Oriented Systems and Cloud Computing Environments Anca Daniela Ionita University POLITEHNICA of Bucharest Strategic Program for Promoting Innovation in Services by Open and Continuous Education

More information

Curriculum Vitae. Professor Serhat Kucukali

Curriculum Vitae. Professor Serhat Kucukali Curriculum Vitae Professor Serhat Kucukali Cankaya University Department of Civil Engineering, Eskisehir Yolu 29. Km, 06810, Ankara, Turkey E-mail: kucukali@cankaya.edu.tr Research Area of Interests Hydropower,

More information

Finite Element Thermal Analysis of Conformal Cooling Channels in Injection Moulding

Finite Element Thermal Analysis of Conformal Cooling Channels in Injection Moulding 5 th Australasian Congress on Applied Mechanics, ACAM 2007 10-12 December 2007, Brisbane, Australia Finite Element Thermal Analysis of Conformal Cooling Channels in Injection Moulding A.B.M. Saifullah

More information

Yannig Roth, PhD Candidate

Yannig Roth, PhD Candidate Yannig Roth, PhD Candidate Université Paris 1 Panthéon Sorbonne Pôle de Recherche Interdisciplinaire en Sciences du Management (PRISM) 17 rue de la Sorbonne 75005 Paris France yannigroth@gmail.com www.yannigroth.com

More information

We have identified three poles of research 3 following the readings of work relative to our study:

We have identified three poles of research 3 following the readings of work relative to our study: The integration of ICT in the teaching of mathematics seen from the side of the teacher. The case of the dynamic geometry in ordinary classes of junior high school 1 There have been researches centered

More information

TUTORING IN DISTANCE EDUCATION

TUTORING IN DISTANCE EDUCATION 15_CLASS.qxd 3/26/2003 10:27 Pagina 199 SComS: New Media in Education (2003) 199-203 BARBARA CLASS* TUTORING IN DISTANCE EDUCATION Action and developmental research The research carried out for this PhD

More information

Curriculum vitae ***************************************************************************

Curriculum vitae *************************************************************************** Curriculum vitae *************************************************************************** Younes BEN ZAIED Born May 09, 1984 Home Address 2 rue des 2 bornes 60400 NOYON (OISE) / France Tel. No. 0033751229437

More information

Sales rise by 11% in local currencies in 1H14

Sales rise by 11% in local currencies in 1H14 17 September 2014 INDITEX FIRST-HALF 2014 RESULTS Sales rise by 11% in local currencies in 1H14 Taking into account currency fluctuations, net sales rose 6% to 8,085 million, while net profit was 928 million

More information

International Call Services

International Call Services International Call Services Affordable rates for business calls. Wherever you are in the world. We ve got plenty to say when it comes to staying in touch when you re overseas. We have agreements with 443

More information

Global Real Estate Outlook

Global Real Estate Outlook Global Real Estate Outlook August 2014 The Hierarchy of Economic Performance, 2014-2015 China Indonesia India Poland South Korea Turkey Australia Mexico United Kingdom Sweden United States Canada South

More information

Odile BOIZARD EDUCATION

Odile BOIZARD EDUCATION Odile BOIZARD Assistant Professor of Management Information Systems BP 921 13288 Marseille cedex 9 France +33 (0) 4 91 82 77 91 odile.boizard@kedgebs.com EDUCATION 2008 IHEDN (Institut des hautes Etudes

More information

Alstom Relationship with universities in 2013

Alstom Relationship with universities in 2013 Country DENMARK NETHERLANDS SWITZERLAND SPAIN BELGIUM BRAZIL Portugal SAUDI ARABIA University name Aalborg University, Aalborg CSP ECN Energy research Centre of the Netherlands, Delft University Eidgenössische

More information

An MDE Process for Generating and Integrating Software Tools: Application to Collaborative Construction of Telecom Services

An MDE Process for Generating and Integrating Software Tools: Application to Collaborative Construction of Telecom Services An MDE Process for Generating and Integrating Software Tools: Application to Collaborative Construction of Telecom Services Vanea Chiprianov Yvon Kermarrec Siegfried Rouvrais Journée sur Transformations

More information

TsAGI EU Scientific Cooperation National Contact Point Aeronautics

TsAGI EU Scientific Cooperation National Contact Point Aeronautics CENTRAL AEROHUYDRODYNAMIC INSTITUTE NAMED AFTER PROF. N.E. ZHUKOVSKY TsAGI EU Scientific Cooperation National Contact Point Aeronautics Central Aerohydrodynamic Institute (TsAGI) named after prof. N.E.

More information

ONTODESIGN; A DOMAIN ONTOLOGY FOR BUILDING AND EXPLOITING PROJECT MEMORIES IN PRODUCT DESIGN PROJECTS

ONTODESIGN; A DOMAIN ONTOLOGY FOR BUILDING AND EXPLOITING PROJECT MEMORIES IN PRODUCT DESIGN PROJECTS ONTODESIGN; A DOMAIN ONTOLOGY FOR BUILDING AND EXPLOITING PROJECT MEMORIES IN PRODUCT DESIGN PROJECTS DAVY MONTICOLO Zurfluh-Feller Company 25150 Belfort France VINCENT HILAIRE SeT Laboratory, University

More information

A method to elaborate a qualifications framework for innovative design Application to a master degree in innovation.

A method to elaborate a qualifications framework for innovative design Application to a master degree in innovation. A method to elaborate a qualifications framework for innovative design Application to a master degree in innovation. D.A. Baron, D. Choulier, and P.A. Weite Université de Technologie de Belfort Montbéliard,

More information

Fabien Hermenier. 2bis rue Bon Secours 44000 Nantes. hermenierfabien@gmail.com http://www.emn.fr/x-info/fhermeni/

Fabien Hermenier. 2bis rue Bon Secours 44000 Nantes. hermenierfabien@gmail.com http://www.emn.fr/x-info/fhermeni/ Fabien Hermenier 2bis rue Bon Secours 44000 Nantes hermenierfabien@gmail.com http://www.emn.fr/x-info/fhermeni/ Activities Oct. 2009 - Sep. 2010 : Post-doctoral researcher École des Mines de Nantes, ASCOLA

More information

1. INTRODUCTION 2. THERMAL TESTING

1. INTRODUCTION 2. THERMAL TESTING DEVELOPMENTS IN MEASUREMENT OF THE THERMAL DETERIORATION OF INSULATED CONTAINERS IN SERVICE R.D. HEAP Shipowners Refrigerated Cargo Research Association, 140 Newmarket Road, Cambridge, CB5 8HE. (U.K.)

More information

Research and Professional Activities. Dr. Mitra Basu

Research and Professional Activities. Dr. Mitra Basu Research and Professional Activities Dr. Mitra Basu Personal Information: Address Computer Science Department Computer Science Department United States Naval Academy Johns Hopkins University Annapolis,

More information

MANDATORY PROVIDENT FUND SCHEMES AUTHORITY

MANDATORY PROVIDENT FUND SCHEMES AUTHORITY Guidelines III.4 MANDATORY PROVIDENT FUND SCHEMES AUTHORITY III.4 Guidelines on Approved Exchanges INTRODUCTION Section 2 of the Mandatory Provident Fund Schemes (General) Regulation ( the Regulation )

More information

Cargo Sales & Service Presentation

Cargo Sales & Service Presentation Cargo Sales & Service Presentation Who is Air Logistics Group? Established in 1994 One of the world s leading cargo sales and service companies 55 offices spanning 32 countries and over 200 employees worldwide

More information

RC GROUP. Corporate Overview

RC GROUP. Corporate Overview RC GROUP Corporate Overview VISION & MISSION We, at RC Group aim to become the preferred Partner for Innovative, Customer driven, Value adding IT based business solutions and services in local and international

More information

ROADMAP ON MARINE RENEWABLE ENERGY

ROADMAP ON MARINE RENEWABLE ENERGY FAME PROJECT - INTERNATIONAL WORKSHOP TERESA SIMAS 1 20 TH NOVEMBER, 2012 OBJECTIVES Overview of marine renewable energy development and prospects CONTENTS Green House Gas emissions targets Renewable energy

More information

A STUDY OF THE BEHAVIOUR OF THE MOBILE AGENT IN THE NETWORK MANAGEMENT SYSTEMS

A STUDY OF THE BEHAVIOUR OF THE MOBILE AGENT IN THE NETWORK MANAGEMENT SYSTEMS A STUDY OF THE BEHAVIOUR OF THE MOBILE AGENT IN THE NETWORK MANAGEMENT SYSTEMS Tarag Fahad, Sufian Yousef & Caroline Strange School of Design and Communication Systems, Anglia Polytechnic University Victoria

More information

Vulnerability Analysis of Fire Spreading in a Building using Fuzzy Logic and its Integration in a Decision Support System

Vulnerability Analysis of Fire Spreading in a Building using Fuzzy Logic and its Integration in a Decision Support System Vulnerability Analysis of Fire Spreading in a Building using Fuzzy Logic and its Integration in a Decision Support System Sanae KHALI ISSA Laboratory of Computer Sciences, Systems and Telecommunication

More information

Marion GARNIER. Marketing Lille

Marion GARNIER. Marketing Lille Marion GARNIER Marketing Lille CV Biography: Dr. Garnier completed her PhD in Marketing on website loyalty (developing a relational model of loyalty to a search engine) in 2006 at Pierre Mendès-France

More information

Virtual Labs in the Engineering Education : a Standardization Approach for Tele-Control O.J. Roesch 1, H. Roth 1 et H. Yahoui 2

Virtual Labs in the Engineering Education : a Standardization Approach for Tele-Control O.J. Roesch 1, H. Roth 1 et H. Yahoui 2 J3eA, Journal sur l enseignement des sciences et technologies de l information et des systèmes, Volume 4, Hors-Série 4, 13 (2005) DOI : http://dx.doi.org/10.1051/bib-j3ea:2005863 EDP Sciences, 2005 Virtual

More information

2015 World Tennis Calendar

2015 World Tennis Calendar 2015 World Tennis Calendar Date Category Tournament Surface DD.MM.YYYY Prize Money (Total Financial Commitment) Draw Ticket Info Winners JANUARY Brisbane International presented by 04.01.2015 Suncorp Brisbane,

More information