Technical Particulars For Video Conferencing Systems For RC Period ( To )

Transcription

1 Technical Particulars For Video Conferencing Systems For RC Period ( To ) Generated on: April 21, :04 PM NIC Schedule Unit : 1 NOS. Video Conferencing End Point, Personal Desktop Type Type Upgradeable Connectivity Camera to P to P Upto 2 Mbps on IP In-built P to P Upto 2 Mbps on IP Integrated with cord & Connectors P to P Multyparty(1 Upto 2 Mbps on IP In-built +3) P to P Multyparty(1 Upto 2 Mbps on IP Integrated with cord & +3) Connectors P to P P to P Multyparty(1 Upto 2 Mbps on IP & ISD In-built +3) N BRI Multyparty(1 Upto 2 Mbps on IP & ISD Integrated with cord & +3) N BRI Connectors Multyparty(1 Upto 2 Mbps on IP In-built +3) Multyparty(1 Upto 2 Mbps on IP Integrated with cord & +3) Connectors 9 Multyparty(1 Upto 2 Mbps on IP & ISD In-built +3) N BRI 10 Multyparty(1 Upto 2 Mbps on IP & ISD Integrated with cord & +3) N BRI Connectors Schedule Unit : 2 NOS. Video Conferencing End Point for Groups Type Upgradeable Connectivity to P to P P to P P to P Upto 2 Mbps on IP Upto 2 Mbps on IP & ISDN BRI Upto 2 Mbps on IP & ISDN PRI Page 1 of 33

2 P to P P to P P to P P to P P to P Multiparty ( 1+3) Multiparty ( 1+3) Multiparty ( 1+5) Multiparty ( 1+5) Multiparty ( Upto 2 Mbps on IP 1+3) Multiparty ( Upto 2 Mbps on IP & ISDN BRI 1+3) Multiparty ( Upto 2 Mbps on IP & ISDN PRI 1+3) Multiparty ( Upto 2 Mbps on IP 1+5) Multiparty ( Upto 2 Mbps on IP & ISDN PRI 1+5) Upto 2 Mbps on IP Upto 2 Mbps on IP & ISDN PRI Upto 2 Mbps on IP & ISDN PRI Upto 2 Mbps on ISDN Schedule Unit : 3 NOS. Video Conferencing End Point High Definition for Groups Type Connectivity Bandwith Camera with zoom P to P IP 4 Mbps 4X Zoom,Separate suppled with 3m cord and connectors P to P IP 4 Mbps 7X Zoom,Separate suppled with 3m cord and connectors P to P IP 4 Mbps 10X Zoom,Separate suppled with 3m cord and connectors Multiparty (1+3) IP 4 Mbps 7X Zoom,Separate suppled with 3m cord and connectors Multiparty (1+3) IP 4 Mbps 10X Zoom,Separate suppled with 3m cord and connectors Multiparty (1+5) IP 4 Mbps 4X Zoom,Separate suppled with 3m cord and connectors Multiparty(1+3) IP 4 Mbps 4X Zoom,Separate suppled with 3m cord and connectors Multipaty (1+5) IP 4 Mbps 7X Zoom,Separate suppled with 3m cord and connectors Multyparty (1+5) IP 4 Mbps 10X Zoom,Separate suppled with 3m cord and connectors Page 2 of 33

3 Schedule Unit : 4 NOS. Add On Items for Video Conferencing System Item Multiparty 1+3 software upgrd for Personal Desktop type end point Multiparty 1+3 software upgrd for Gr. VC end point Multiparty 1+5 software upgrd for Gr. VC end point Upgrd for ISDN PRI for 2Mbps for Gr.VC end point Upgrd for ISDN PRI for 2Mbps for HD Gr.VC end point Software Upgrade to 6 Mbps line rate for HD Group VC End Point Upgrade for 2xISDN PRI for 2Mpbs for external MCU Multiparty (1+3) software upgrade for PC type Software End Point Multiparty (1+3) software upgrade for Group VC Software End Point Multiparty (1+5) software upgrade for Group VC Software End Point Schedule Unit : 5 NOS. Video Conferencing End Point, HD Personal Desktop Type Type Upgradeable Connectivity Camera to P to P Upto 2 Mbps on IP In-built P to P Upto 2 Mbps on IP Integrated with cord & Connectors P to P Multiparty Upto 4 Mbps on IP In-built (1+3) P to P Multiparty Upto 4 Mbps on IP Integrated with cord & (1+3) Connectors P to P P to P Multiparty Upto 4 Mbps on IP & ISDN In-built (1+3) PRI Multiparty Upto 4 Mbps on IP & ISDN Integrated with cord & (1+3) PRI Connectors Multiparty Upto 4 Mbps on IP In-built (1+3) Multiparty Upto 4 Mbps on IP Integrated with cord & (1+3) Connectors Page 3 of 33

4 9 10 Multiparty Upto 4 Mbps on IP & 2Mbps In-built (1+3) on ISDN Multiparty Upto 4 Mbps on IP & 2Mbps Integrated with cord & (1+3) on ISDN Connectors Schedule Unit : 6 NOS. Multipoint Conferencing Bridge for High Definition Type Ports Connectivity per port All in one Closed Box 10 IP All in one Closed Box 20 IP All in one Closed Box 30 IP Upto 2 Mbps on IP Upto 2 Mbps on IP Upto 2 Mbps on IP Schedule Unit : 7 NOS. Video Conferencing Software End Point Type 1 2 Point to Point without hardware Point to Point with hardware Page 4 of 33

5 Detailed Specification Schedule 1 Specification : Video Conferencing End Point, Personal Desktop Type 1)End Point for Point to Point Video Conferencing The End Point shall be a point to point desktop system with wireless remote control/mouse, camera built-in microphone, speakers, cables,17" LCD screen, data content sharing ability for use over IP network through RJ-45 connectivity and suitable for bandwidth as specified. Main Features: a)the system shall come equipped with Wireless remote control/mouse, camera builtin on a single composed unit microphone, speakers, cables, LCD display and data content sharing ability. b)the system shall have 17" display minimum for enabling full screen viewing of remote and Picture in Picture for near end video. The system Shall have the capability to operate as a PC monitor when not in a Video call. c)system shall have upto H.264 video coding support. d)system shall have upto G.728 or equivalent or above, audio coding support suitable for 14 KHz audio or better. e)syste shall have hardware/software to show PC presentation / application screens /PC Content. f)system shall have live video resolution PAL Standards. g)system must have AES encryption for IP calls. h)system must support H.239 for sharing of video and graphics content during the video call. i)it shall be possible to see both the near and far site on One Screen thus making most efficient use of a single display area. The system shall have the following: a) Audio input -1x stereo mini jack for Headphone b) LAN Input - 1x RJ-45 Ethernet port (10 Mbps/100Mbps/Auto sensing) for LAN c) VGA/DVI for PC connectivity a) Data sharing hardware or software. b) Remote Control/mouse c) All Power and communication cables necessary for above features 2.End Point for Point to Point Video Conferencing upgradeable to 1+3 Multiparty Page 5 of 33

6 The End Point shall be a point to point desktop system with Wireless remote control/mouse, camera built-in, microphone, speakers, cables,17" LCD screen, data content sharing ability for use over specified bandwidth of IP network (H.323) through RJ-45 and also ISDN (H.320)if specified, to give 25fps at 128Kbps and above. Main Features: a) System shall have the ability to upgrade for 4 sites multiparty conference by software. b) System shall have minimum 17" display for enabling full screen viewing of remote and Picture in Picture for near end video. c) It shall be possible to see both the near and far site on One Screen thus making most efficient use of a single display area. d) System shall have upto H.264 video coding support. e) System shall have upto G.728, audio coding support and suitable for 14KHz audio or better. f) System must support H.239 for sharing of video and graphics content during the video call g) Video Codec shall support 16:9 format for supporting LCD/ Plasma display. h) Shall have live video resolution Conforming to PAL Standards. i) Shall give 25 frames per second at 128Kbps & above. j) System must have AES encryption for ISDN and IP calls. k) System shall have built-in stereo speakers for PC audio, with separate audio volume control from video conferencing functionality. The system shall have the following: a) Audio input -1x stereo mini jack for Headphone b) LAN Input - 1x RJ-45 Ethernet port (10 Mbps/100Mbps/Auto sensing) for LAN c) VGA/DVI for PC connectivity a) Data sharing hardware or software. b) Remote Control/mouse c) All Power and communication cables necessary for above features 3.End Point for Multiparty (1+3) Video Conferencing The End Point shall be a Multiparty Video Conferencing desktop system with wireless remote control/mouse, camera built-in microphone, speakers, cables, 17" LCD screen, data content sharing ability for use over specified bandwidth of IP network (H.323) through RJ-45 and also ISDN (H.320) if specified, to give 25fps at 128Kbps and above and incorporate 4 party multipoint capabilities. Main Features: Page 6 of 33

7 a) System shall have the ability to conduct 4 sites multiparty conference. b) System shall have minimum 17" display for enabling full screen viewing of remote and Picture in Picture for near end video. c) It shall be possible to see both the near and far site on One Screen thus making most efficient use of a single display area. d) System shall have upto H.264 video coding support. e) System shall have upto G.728 audio coding support and suitable for 14KHz audio or better. h) System must support H.239 for sharing of video and graphics content during the video call. i) Video Codec shall support 16:9 format for supporting LCD/ Plasma display. j) Shall give 25 frames per second at 128Kbps & above. k) System must have AES encryption for ISDN and IP calls. l) System shall have built-in stereo speakers for PC audio, with separate audio volume control from video conferencing functionality The system shall have the following: a) Audio input -1x stereo mini jack for Headphone b) LAN Input - 1x RJ-45 Ethernet port (10 Mbps/100Mbps/Auto sensing) for LAN c) VGA/DVI for PC connectivity a) Data sharing hardware or software. b) Remote Control/mouse c) All Power and communication cables necessary for above features Schedule 2 Specification : Video Conferencing End Point for Groups 1)End Point for Point to Point Video Conferencing The End Point shall be a standalone system with in built or integrated with cord and connectors PTZ camera and CODEC for simple installation with a TV / Plasma display (display not included in the scope of supply) for use over specified bandwidth of IP network (H.323) through RJ-45 and also ISDN (H.320) if specified, to give 25fps at 128Kbps and above. Main Features: a) Camera shall be In built or integrated with cord and connectors with auto/ manual focus and brightness control, 10x Zoom, +/- 80 degrees PAN, +/- 10 degrees Tilt and at least 10 near-end and 10 far end camera presets with Page 7 of 33

8 capability to operate in normal room illumination conditions support. b) Codec shall support 25fps at 128 Kbps & above. c) Shall be upgradeable to SIP up to 2Mbps in future. d) System shall have upto H.264 video coding support. e) System shall have upto G.728 audio coding support and suitable for 14KHz audio or better. f) System must support H.239 for sharing of video and graphics content during the video call. g) Shall have Live Standard definition video resolution of PAL Standard upto 4CIF. h) Video Codec shall support 16:9 format for supporting LCD/ Plasma display. i) It shall be possible to use the Stadard definition resolution/xga output to connect to main monitor. j) System must be support two omni directional microphones, however only one such microphone shall be included in supply. k) Built -in Acoustic echo canceller and Noise reduction. l) Video Codec shall have ability to connect projector with XGA resolution for PC presentation. m) System shall support NAT/firewall traversal solutions n) System shall support far end camera control o) Shall have hardware/software to show PC presentation / application screens / PC Content. p) Shall come with all the power & communications cables necessary for the above features. q) Operating conditions: 230 volts, 50 Hz and PAL video standard. r) Shall come with easy to use infra-red hand held remote control with operating distance of at least 4.5 m. Total No of Standard Definition Video(I/O) Ports should 5. a) Codec with Camera b) One Omni Directional Microphones with stereo type connectivity c) Remote Control. d) All Power and communication cables necessary for above features e) Data sharing Software and Hardware 2. End Point for Point to Point Video Conferencing upgradeable to(1+3)multiparty The End Point shall be a standalone system for point to point Video conferencing with PTZ camera in built or integrated with cord and connectors and CODEC for simple installation with a TV / Plasma display (display not included in the scope of supply) for use specified bandwidth of IP network (H.323) through RJ-45 and also ISDN (H.320) if specified, to give 25fps at 128Kbps and above. The end point shall be up-gradable for Multiparty (1+3) conference. Page 8 of 33

9 Main Features: a) Camera shall be In built or integrated with cord and connectors with auto /manual focus and brightness control, 10x Zoom, +/- 80 degrees PAN, +/- 10 degrees Tilt and at least 10 near-end and 10 far end camera presets with capability to operate in normal room illumination conditions support b) Codec shall support 25fps at 128 Kbps & above c) Shall support SIP up to 2Mbps. d) System shall have upto H.264, video coding support. e) System shall have upto G.728, audio coding support and suitable for 14KHz audio or better f) System must support H.239 for sharing of video and graphics content during the video call. g) Shall have Live Standard definition video resolution of PAL Standard upto 4CIF. h) Video Codec shall support 16:9 format for supporting LCD/ Plasma display. i) It shall be possible to use the Stadard definition resolution/xga output to connect to main monitor. j) System must be support two omni directional microphones, however only one such microphone shall be included in supply. k) Built -in Acoustic echo canceller and Noise reduction. l) Video Codec shall have ability to connect projector with XGA resolution for PC presentation. m) System shall support NAT/firewall traversal solutions n) System shall support far end camera control o) Shall have hardware/software to show PC presentation / application screens / PC Content. p) System shall have the ability to upgrade for 4 sites multiparty conference by software. q) Shall come with all the power & communications cables necessary for the above features. r) Operating conditions: 230 volts, 50 Hz and PAL video standard. s) Shall come with easy to use infra-red hand held remote control with operating distance of at least 4.5 m. Total No of Standard Definition Video(I/O) Ports should 5. a) Codec with Camera b) One Omni Directional Microphones with stereo type connectivity c) Remote Control. d) All Power and communication cables necessary for above features e) Data sharing Software and Hardware 3. End Point for Multi Party (1 + 3) Video Conferencing The End Point shall be a standalone system for Multiparty (1+3) Video Page 9 of 33

10 conferencing with PTZ camera in built or integrated with cord and connectors and CODEC for simple installation with a TV / Plasma display (display not included in the scope of supply) for use specified bandwidth of IP network (H.323) through RJ-45 and also ISDN (H.320) if specified, to give 25fps at 128Kbps and above. Main Features: a) Camera shall be In built or integrated with cord and connectors with auto/manual focus and brightness control, 10x Zoom, +/- 80 degrees PAN, +/- 10 degrees Tilt and at least 10 near-end and 10 far end camera presets with capability to operate in normal room illumination conditions support b) Codec shall support 25fps at 128 Kbps & above c) Shall support SIP up to 2Mbps. d) System shall have upto H.264, video coding support. e) System shall have upto G.728, audio coding support and suitable for 14KHz audio or better f) System must support H.239 for sharing of video and graphics content during the video call. g) Shall have Live Standard definition video resolution of PAL Standard upto 4CIF. h) Video Codec shall support 16:9 format for supporting LCD/ Plasma display. i) It shall be possible to use the Stadard definition resolution/xga output to connect to main monitor. j) System must be support two omni directional microphones, however only one such microphone shall be included in supply. k) Built -in Acoustic echo canceller and Noise reduction. l) Video Codec shall have ability to connect projector with XGA resolution for PC presentation. m) System shall support NAT/firewall traversal solutions n) System shall support far end camera control o) Shall have hardware/software to show PC presentation / application screens / PC Content. p) System shall be suitable for 4 sites multiparty conference by software. q) Shall come with all the power & communications cables necessary for the above features. r) Operating conditions: 230 volts, 50 Hz and PAL video standard. s) Shall come with easy to use infra-red hand held remote control with operating distance of at least 4.5 m. Total No of Standard Definition Video(I/O) Ports should 5. a) Codec with Camera with (1+3)Multi Party software b) Two Omni Directional Microphones with stereo type connectivity c) Remote Control. Page 10 of 33

11 d) All Power and communication cables necessary for above features e) Data sharing Software and Hardware 4. End Point for Point to Point Video Conferencing upgradeable to (1+5)Multiparty The End Point shall be a standalone system for point to point Video conferencing with PTZ camera in built or integrated with cord and connectors and CODEC for simple installation with a TV / Plasma display (display not included in the scope of supply) for use specified bandwidth of IP network (H.323) through RJ-45 and also ISDN (H.320) if specified, to give 25fps at 128Kbps and above. The end point shall be up-gradable for Multiparty (1+5) conference. Main Features: a) Camera shall be In built or integrated with cord and connectors with auto/manual focus and brightness control, 10x Zoom, +/- 80 degrees PAN, +/- 10 degrees Tilt and at least 10 near-end and 10 far end camera presets with capability to operate in normal room illumination conditions support. b) Codec shall support 25fps at 128 Kbps & above c) Shall support SIP up to 2Mbps. d) System shall have upto H.264, video coding support. e) System shall have upto G.728, audio coding support and suitable for 14KHz audio or better f) System must support H.239 for sharing of video and graphics content during the video call. g) Shall have Live Standard definition video resolution of PAL Standard upto 4CIF. h) Video Codec shall support 16:9 format for supporting LCD/ Plasma display. i) It shall be possible to use the Stadard definition resolution/xga output to connect to main monitor. j) System must be support two Omni-directional microphones, however only one such microphone shall be included in supply. k) Built -in Acoustic echo canceller and Noise reduction. l) Video Codec shall have ability to connect projector with XGA resolution for PC presentation. m) System shall support NAT/firewall traversal solutions n) System shall support far end camera control o) Shall have hardware/software to show PC presentation / application screens / PC Content. p) System shall have the ability to upgrade for 4 sites multiparty conference by software. q) Shall come with all the power & communications cables necessary for the above features. r) Operating conditions: 230 volts, 50 Hz and PAL video standard. Page 11 of 33

12 s) Shall come with easy to use infra-red hand held remote control with operating distance of at least 4.5 m. Total No of Standard Definition Video(I/O) Ports should 5. a) Codec with Camera b) One Omni Directional Microphones with stereo type connectivity c) Remote Control. d) All Power and communication cables necessary for above features e) Data sharing Software and Hardware 5. End Point for Multiparty (1+5) Video Conferencing The End Point shall be a standalone system for Multiparty (1+5) Video conferencing with PTZ camera in built or integrated with cord and connectors and CODEC for simple installation with a TV / Plasma display (display not included in the scope of supply) for use specified bandwidth of IP network (H.323) through RJ-45 and also ISDN (H.320) if specified, to give 25fps at 128Kbps and above. Main Features: a) Camera shall be In built or integrated with cord and connectors with auto/manual focus and brightness control, 10x Zoom, +/- 80 degrees PAN, +/- 10 degrees Tilt and at least 10 near-end and 10 far end camera presets with capability to operate in normal room illumination conditions support b) Codec shall support 25fps at 128 Kbps & above c) Shall support SIP up to 2Mbps. d) System shall have upto H.264, video coding support. e) System shall have upto G.728, audio coding support and suitable for 14KHz audio or better f) System must support H.239 for sharing of video and graphics content during the video call. g) Shall have Live Standard definition video resolution of PAL Standard upto 4CIF. h) Video Codec shall support 16:9 format for supporting LCD/ Plasma display. i) It shall be possible to use the Stadard definition resolution/xga output to connect to main monitor. j) System must be support two Omni directional microphones, however only one such microphone shall be included in supply. k) Built -in Acoustic echo canceller and Noise reduction. l) Video Codec shall have ability to connect projector with XGA resolution Page 12 of 33

13 for PC presentation. m) System shall support NAT/firewall traversal solutions n) System shall support far end camera control o) Shall have hardware/software to show PC presentation / application screens / PC Content. p) System shall be suitable for 4 sites multiparty conference by software. q) Shall come with all the power & communications cables necessary for the above features. r) Operating conditions: 230 volts, 50 Hz and PAL video standard. s) Shall come with easy to use infra-red hand held remote control with operating distance of at least 4.5 m. Total No of Standard Definition Video(I/O) Ports should 5. a) Codec with Camera with 1+5 Multi Party software b) Two Omni Directional Microphones with stereo type connectivity c) Remote Control. d) All Power and communication cables necessary for above features e) Data sharing Software and Hardware Schedule 3 Video Conferencing End Point High Definition for Groups 1. End Point for Point to Point High Definition Video Conferencing With 4X optical zoom camera. The End Point shall be a standalone system with separate high definition camera and codec for simple installation with a TV / Plasma (TV/Plasma not included in the scope of supply) for use over IP network (H.323) through RJ-45 connectivity and suitable for bandwidth up to 4 Mbps to give 12.5/25fps at 64 Kbps to 320 Kbps and 25/30fps at 384 Kbps and above. Main Features a) Camera shall be In built or integrated with cord and connectors with auto/manual focus and brightness control, 4x Zoom, +/- 80 degrees PAN, +/- 10 degrees Tilt.The camera shall be supplied with 3m cord and connectors. b) Shall be possible to attach any standard brand of PTZ Camera like Canon and Sony available to the Codec supplied Page 13 of 33

14 c) Shall have at least 10 near-end and 10 far end camera presets with capability to operate in normal room illumination conditions support. d) System shall have upto H.264 video coding support. e) System shall have upto G.728 audio coding support and suitable for 14 KHz audio or better. f) System must support H.239 for sharing of video and graphics content during the video call g) Shall have Live high definition video resolution as per PAL Standard upto 720p. h) System must support with 2 omni directional microphones,however only one such microphone shall be included in supply. i) RJ-45, 10/100Mbps Base-T Ethernet connection. j) System must have AES encryption for ISDN and IP calls. k) Built -in Acoustic echo canceller and Noise reduction. l) System shall have External power adaptor: 12V DC Adapter Input: V, 50/60Hz, AC m) Shall come with easy to use infra-red hand held remote control with operating distance of at least 4.5 m. Total No of High Definition Video(I/O) Ports should be 5. a) Codec b) High Definition Camera c) At least 1 Omni Directional Microphone with stereo type connectivity d) Remote Control. e) Data sharing hardware and software. f) All Power and communication cables necessary for above features 2. End Point for Point to Point High Definition Video Conferencing With 7X optical zoom camera. The End Point shall be a standalone system with separate high definition camera and codec for simple installation with a TV / Plasma (TV/Plasma not included in the scope of supply) for use over IP network (H.323) through RJ-45 connectivity and suitable for bandwidth up to 4 Mbps to give 12.5/25fps at 64 Kbps to 320 Kbps and 25/30fps at 384 Kbps and above. Main Features a) Camera shall be In built or integrated with cord and connectors with auto/manual focus and brightness control, 7x Zoom, +/- 80 degrees PAN, +/- 10 degrees Tilt.The camera shall be supplied with 3m cord and connectors. b) Shall be possible to attach any standard brand of PTZ Camera like Canon and Sony available to the Codec supplied Page 14 of 33

15 c) Shall have at least 10 near-end and 10 far end camera presets with capability to operate in normal room illumination conditions support. d) System shall have upto H.264 video coding support. e) System shall have upto G.728 audio coding support and suitable for 14 KHz audio or better. f) System must support H.239 for sharing of video and graphics content during the video call g) Shall have Live high definition video resolution as per PAL Standard upto 720p. h) System must support with 2 omni directional microphones,however only one such microphone shall be included in supply. i) RJ-45, 10/100Mbps Base-T Ethernet connection. j) System must have AES encryption for ISDN and IP calls. k) Built -in Acoustic echo canceller and Noise reduction. l) System shall have External power adaptor: 12V DC Adapter Input: V, 50/60Hz, AC m) Shall come with easy to use infra-red hand held remote control with operating distance of at least 4.5 m. Total No of High Definition Video(I/O) Ports should be 5. a) Codec b) High Definition Camera c) At least 1 Omni Directional Microphone with stereo type connectivity d) Remote Control. e) Data sharing hardware and software. f) All Power and communication cables necessary for above features 3. End Point for Point to Point High Definition Video Conferencing With 10X optical zoom camera. The End Point shall be a standalone system with separate high definition camera and codec for simple installation with a TV / Plasma (TV/Plasma not included in the scope of supply) for use over IP network (H.323) through RJ-45 connectivity and suitable for bandwidth up to 4 Mbps to give 12.5/25fps at 64 Kbps to 320 Kbps and 25/30fps at 384 Kbps and above. Main Features a) Camera shall be In built or integrated with cord and connectors with auto/manual focus and brightness control, 10x Zoom, +/- 80 degrees PAN, +/- 10 degrees Tilt.The camera shall be supplied with 3m cord and connectors. b) Shall be possible to attach any standard brand of PTZ Camera like Canon and Sony available to the Codec supplied Page 15 of 33

16 c) Shall have at least 10 near-end and 10 far end camera presets with capability to operate in normal room illumination conditions support. d) System shall have upto H.264 video coding support. e) System shall have upto G.728 audio coding support and suitable for 14 KHz audio or better. f) System must support H.239 for sharing of video and graphics content during the video call g) Shall have Live high definition video resolution as per PAL Standard upto 720p. h) System must support with 2 omni directional microphones,however only one such microphone shall be included in supply. i) RJ-45, 10/100Mbps Base-T Ethernet connection. j) System must have AES encryption for ISDN and IP calls. k) Built -in Acoustic echo canceller and Noise reduction. l) System shall have External power adaptor: 12V DC Adapter Input: V, 50/60Hz, AC m) Shall come with easy to use infra-red hand held remote control with operating distance of at least 4.5 m. Total No of High Definition Video(I/O) Ports should be 5. a) Codec b) High Definition Camera c) At least 1 Omni Directional Microphone with stereo type connectivity d) Remote Control. e) Data sharing hardware and software. f) All Power and communication cables necessary for above features 4. End Point for Multiparty (1+3) High Definition Video Conferencing With 7X optical zoom camera. The End Point shall be a standalone system for Multiparty (1+3) Video conferencing high definition camera and codec for simple installation with a TV / Plasma display (display not included in the scope of supply) for use specified bandwidth of IP network (H.323) through RJ-45 and also ISDN (H.320) if specified, to give 25fps at 128Kbps and above. Main Features a) System shall include 4 sites multiparty conference software. b) Shall include camera with 1280 x 720p CCD/CMOS imager, 7X optical zoom, 72deg FOV at min zoom, deg pan range,+10 deg tilt range in order to accept HD resolution video. The camera shall be supplied with 3m cord and connectors. c) Shall have at least 10 near-end and 10 far end camera presets with Page 16 of 33

17 capability to operate in normal room illumination conditions support. d) The system shall deliver HD video, HD voice & HD content for an overall HD experience e) Shall support SIP up to 4Mbps. f) System shall have upto H.264 video coding support. g) System shall have upto G.728 audio coding support and suitable for 14 KHz audio or better. h) System must support H.239 for sharing of video and graphics content during the video call i) Shall have live resolution of 720p and deliver High definition video at 30fps from 1Mbps to 4Mbps. j) It shall be possible to see both the near and far site on one Screen thus making most efficient use of a single display area. k) Shall have Live high definition video resolution as per PAL Standard upto 720p. l) System must support with 2 omni directional microphones,however only one such microphone shall be included in supply. m) RJ-45, 10/100Mbps Base-T Ethernet connection. n) System must have AES encryption for ISDN and IP calls. o) Video Codec shall support 16:9 format for supporting LCD/ Plasma display. p) Operating conditions: 230 volts, 50 Hz and PAL video standard q) Shall come with easy to use infra-red hand held remote control with operating distance of at least 4.5 m. Total No of High Definition Video(I/O) Ports should be 5. a) Codec b) High Definition Camera c) Multiparty software for 4 party calling d) At least 1 Omni Directional Microphone with stereo type connectivity e) Remote Control. f) Data sharing hardware and software. g) All Power and communication cables necessary for above features 5. End Point for Multiparty (1+3) High Definition Video Conferencing With 10X optical zoom camera. The End Point shall be a standalone system for Multiparty (1+3) Video conferencing high definition camera and codec for simple installation with a TV / Plasma display (display not included in the scope of supply) for use specified bandwidth of IP network (H.323) through RJ-45 and also ISDN (H.320) if specified, to give 25fps at 128Kbps and above. Main Features a) System shall include 4 sites multiparty conference software. Page 17 of 33

18 b) Shall include camera with 1280 x 720p CCD/CMOS imager, 10X optical zoom, 72deg FOV at min zoom, deg pan range,+10 deg tilt range in order to accept HD resolution video. The camera shall be supplied with 3m cord and connectors. c) Shall have at least 10 near-end and 10 far end camera presets with capability to operate in normal room illumination conditions support. d) The system shall deliver HD video, HD voice & HD content for an overall HD experience e) Shall support SIP up to 4Mbps. f) System shall have upto H.264 video coding support. g) System shall have upto G.728 audio coding support and suitable for 14 KHz audio or better. h) System must support H.239 for sharing of video and graphics content during the video call i) Shall have live resolution of 720p and deliver High definition video at 30fps from 1Mbps to 4Mbps. j) It shall be possible to see both the near and far site on one Screen thus making most efficient use of a single display area. k) Shall have Live high definition video resolution as per PAL Standard upto 720p. l) System must support with 2 omni directional microphones,however only one such microphone shall be included in supply. m) RJ-45, 10/100Mbps Base-T Ethernet connection. n) System must have AES encryption for ISDN and IP calls. o) Video Codec shall support 16:9 format for supporting LCD/ Plasma display. p) Operating conditions: 230 volts, 50 Hz and PAL video standard q) Shall come with easy to use infra-red hand held remote control with operating distance of at least 4.5 m. Total No of High Definition Video(I/O) Ports should be 5. a) Codec b) High Definition Camera c) Multiparty software for 4 party calling d) At least 1 Omni Directional Microphone with stereo type connectivity e) Remote Control. f) Data sharing hardware and software. g) All Power and communication cables necessary for above features 6. End Point for Multiparty (1+5) High Definition Video Conferencing With 4X optical zoom camera. The End Point shall be a standalone system for Multiparty (1+5) Video conferencing high definition camera and codec for simple installation with Page 18 of 33

19 a TV / Plasma display (display not included in the scope of supply) for use specified bandwidth of IP network (H.323) through RJ-45 and also ISDN (H.320) if specified, to give 25fps at 128Kbps and above. Main Features a) System shall include 6 sites multiparty conference software. b) Shall include camera with 1280 x 720p CCD/CMOS imager, 4X optical zoom, 72deg FOV at min zoom, deg pan range,+10 deg tilt range in order to accept HD resolution video. The camera shall be supplied with 3m cord and connectors. c) Shall have at least 10 near-end and 10 far end camera presets with capability to operate in normal room illumination conditions support. d) The system shall deliver HD video, HD voice & HD content for an overall HD experience e) Shall support SIP up to 4Mbps. f) System shall have upto H.264 video coding support. g) System shall have upto G.728 audio coding support and suitable for 14 KHz audio or better. h) System must support H.239 for sharing of video and graphics content during the video call. i) Shall have live resolution of 720p and deliver High definition video at 30fps from 1Mbps to 4Mbps. j) It shall be possible to see both the near and far site on one Screen thus making most efficient use of a single display area. k) Shall have Live high definition video resolution as per PAL Standard upto 720p. l) System must support with 2 omni directional microphones,however only one such microphone shall be included in supply. m) RJ-45, 10/100Mbps Base-T Ethernet connection. n) System must have AES encryption for ISDN and IP calls. o) Video Codec shall support 16:9 format for supporting LCD/ Plasma display. p) Operating conditions: 230 volts, 50 Hz and PAL video standard q) Shall come with easy to use infra-red hand held remote control with operating distance of at least 4.5 m. Total No of High Definition Video(I/O) Ports should be 5. a) Codec b) High Definition Camera c) Multiparty software for 6 party calling d) At least 2 Omni Directional Microphones with stereo type connectivity e) Remote Control. f) Data sharing hardware and software. g) All Power and communication cables necessary for above features Page 19 of 33

20 7. End Point for Multiparty (1+3) High Definition Video Conferencing With 4X optical zoom camera. The End Point shall be a standalone system for Multiparty (1+3) Video conferencing high definition camera and codec for simple installation with a TV / Plasma display (display not included in the scope of supply) for use specified bandwidth of IP network (H.323) through RJ-45 and also ISDN (H.320) if specified, to give 25fps at 128Kbps and above. Main Features a) System shall include 4 sites multiparty conference software. b) Shall include camera with 1280 x 720p CCD/CMOS imager, 4X optical zoom, 72deg FOV at min zoom, deg pan range,+10 deg tilt range in order to accept HD resolution video. The camera shall be supplied with 3m cord and connectors. c) Shall have at least 10 near-end and 10 far end camera presets with capability to operate in normal room illumination conditions support. d) The system shall deliver HD video, HD voice & HD content for an overall HD experience e) Shall support SIP up to 4Mbps. f) System shall have upto H.264 video coding support. g) System shall have upto G.728 audio coding support and suitable for 14 KHz audio or better. h) System must support H.239 for sharing of video and graphics content during the video call i) Shall have live resolution of 720p and deliver High definition video at 30fps from 1Mbps to 4Mbps. j) It shall be possible to see both the near and far site on one Screen thus making most efficient use of a single display area. k) Shall have Live high definition video resolution as per PAL Standard upto 720p. l) System must support with 2 omni directional microphones,however only one such microphone shall be included in supply. m) RJ-45, 10/100Mbps Base-T Ethernet connection. n) System must have AES encryption for ISDN and IP calls. o) Video Codec shall support 16:9 format for supporting LCD/ Plasma display. p) Operating conditions: 230 volts, 50 Hz and PAL video standard q) Shall come with easy to use infra-red hand held remote control with operating distance of at least 4.5 m. Total No of High Definition Video(I/O) Ports should be 5. a) Codec b) High Definition Camera c) Multiparty software for 4 party calling Page 20 of 33

21 d) At least 1 Omni Directional Microphone with stereo type connectivity e) Remote Control. f) Data sharing hardware and software. g) All Power and communication cables necessary for above features 8. End Point for Multiparty (1+5) High Definition Video Conferencing With 7X optical zoom camera. The End Point shall be a standalone system for Multiparty (1+5) Video conferencing high definition camera and codec for simple installation with a TV / Plasma display (display not included in the scope of supply) for use specified bandwidth of IP network (H.323) through RJ-45 and also ISDN (H.320) if specified, to give 25fps at 128Kbps and above. Main Features a) System shall include 6 sites multiparty conference software. b) Shall include camera with 1280 x 720p CCD/CMOS imager, 7X optical zoom, 72deg FOV at min zoom, deg pan range,+10 deg tilt range in order to accept HD resolution video. The camera shall be supplied with 3m cord and connectors. c) Shall have at least 10 near-end and 10 far end camera presets with capability to operate in normal room illumination conditions support. d) The system shall deliver HD video, HD voice & HD content for an overall HD experience e) Shall support SIP up to 4Mbps. f) System shall have upto H.264 video coding support. g) System shall have upto G.728 audio coding support and suitable for 14 KHz audio or better. h) System must support H.239 for sharing of video and graphics content during the video call. i) Shall have live resolution of 720p and deliver High definition video at 30fps from 1Mbps to 4Mbps. j) It shall be possible to see both the near and far site on one Screen thus making most efficient use of a single display area. k) Shall have Live high definition video resolution as per PAL Standard upto 720p. l) System must support with 2 omni directional microphones,however only one such microphone shall be included in supply. m) RJ-45, 10/100Mbps Base-T Ethernet connection. n) System must have AES encryption for ISDN and IP calls. o) Video Codec shall support 16:9 format for supporting LCD/ Plasma display. p) Operating conditions: 230 volts, 50 Hz and PAL video standard q) Shall come with easy to use infra-red hand held remote control with operating distance of at least 4.5 m. Page 21 of 33

22 Total No of High Definition Video(I/O) Ports should be 5. a) Codec b) High Definition Camera c) Multiparty software for 6 party calling d) At least 2 Omni Directional Microphones with stereo type connectivity e) Remote Control. f) Data sharing hardware and software. g) All Power and communication cables necessary for above features 9. End Point for Multiparty (1+5) High Definition Video Conferencing With 10X optical zoom camera. The End Point shall be a standalone system for Multiparty (1+5) Video conferencing high definition camera and codec for simple installation with a TV / Plasma display (display not included in the scope of supply) for use specified bandwidth of IP network (H.323) through RJ-45 and also ISDN (H.320) if specified, to give 25fps at 128Kbps and above. Main Features a) System shall include 6 sites multiparty conference software. b) Shall include camera with 1280 x 720p CCD/CMOS imager, 10X optical zoom, 72deg FOV at min zoom, deg pan range,+10 deg tilt range in order to accept HD resolution video. The camera shall be supplied with 3m cord and connectors. c) Shall have at least 10 near-end and 10 far end camera presets with capability to operate in normal room illumination conditions support. d) The system shall deliver HD video, HD voice & HD content for an overall HD experience e) Shall support SIP up to 4Mbps. f) System shall have upto H.264 video coding support. g) System shall have upto G.728 audio coding support and suitable for 14 KHz audio or better. h) System must support H.239 for sharing of video and graphics content during the video call. i) Shall have live resolution of 720p and deliver High definition video at 30fps from 1Mbps to 4Mbps. j) It shall be possible to see both the near and far site on one Screen thus making most efficient use of a single display area. k) Shall have Live high definition video resolution as per PAL Standard upto 720p. l) System must support with 2 omni directional microphones,however only one such microphone shall be included in supply. m) RJ-45, 10/100Mbps Base-T Ethernet connection. Page 22 of 33

23 n) System must have AES encryption for ISDN and IP calls. o) Video Codec shall support 16:9 format for supporting LCD/ Plasma display. p) Operating conditions: 230 volts, 50 Hz and PAL video standard q) Shall come with easy to use infra-red hand held remote control with operating distance of at least 4.5 m. Total No of High Definition Video(I/O) Ports should be 5. a) Codec b) High Definition Camera c) Multiparty software for 6 party calling d) At least 2 Omni Directional Microphones with stereo type connectivity e) Remote Control. f) Data sharing hardware and software. g) All Power and communication cables necessary for above features Schedule 4 Add On Items for Video Conferencing System Specification :. Schedule 5 Specification : Video Conferencing End Point, HD Personal Desktop Type 1)End Point for Point to Point High Definition Video Conferencing The End Point shall be a point to point high definition video conferencing desktop system with wireless remote control/mouse, camera built-in microphone, speakers, cables,20" LCD screen, data content sharing ability for use over IP network (H.323) through RJ-45 connectivity and suitable for bandwidth up to 2 Mbps. Main Features: a) The system shall come equipped with Wireless remote control/mouse, camera built-in microphone, speakers, cables, LCD display and data content sharing ability. b) The system shall have 20" display minimum for enabling full screen viewing of remote and Picture in Picture for near end video. Shall have the capability to operate as a PC monitor when not in a Video call. c) System shall have upto H.264 video coding support. d) System shall have upto G.728 audio coding support suitable for 14 KHz audio or Page 23 of 33

24 better. e) Shall have hardware/software to show PC presentation / application screens / PC Content. f) Shall have live High Definition video resolution upto 720p. g) System must have AES encryption for IP calls. h) System must support H.239 for sharing of video and graphics content during the video call. i) It shall be possible to see both the near and far site on One Screen thus making most efficient use of a single display area. The system shall have the following: a) Audio input -1x mm stereo mini jack for Headphone b) LAN Input - 1x RJ-45 Ethernet port (10 Mbps/100Mbps/Auto sensing) for LAN c) HD port for PC connectivity a) Data sharing hardware and software. b) Remote Control/mouse where applicable c) All Power and communication cables necessary for above features 2. End Point for Point to Point High Definition Video Conferencing upgradeable to(1+3)multiparty The End Point shall be a point to point high definition video conferencing desktop system with Wireless remote control/mouse, camera built-in microphone, speakers, cables, 20" LCD screen, data content sharing ability for use over specified bandwidth of IP network (H.323) through RJ-45 and also ISDN (H.320) if specified, to give 25fps at 128Kbps and above. Main Features: a) System shall have the ability to upgrade for 4 sites multiparty conference by software. b) System shall have minimum 20" display for enabling full screen viewing of remote and Picture in Picture for near end video. c) It shall be possible to see both the near and far site on One Screen thus making most efficient use of a single display area. d) System shall have upto H.264 video coding support. g) System shall have upto G.728 audio coding support and suitable for 14KHz audio or better. h) System must support H.239 for sharing of video and graphics content during Page 24 of 33

25 the video call i) Video Codec shall support 16:9 format for supporting LCD/ Plasma display. j) Shall have live High Definition video resolution upto 720p. k) Shall give 25 frames per second at 128Kbps & above. l) System must have AES encryption for ISDN and IP calls. m) System shall have built-in stereo speakers for PC audio, with separate audio volume control from video conferencing functionality The system shall have the following: a) Audio input -1x stereo mini jack for Headphone b) LAN Input - 1x RJ-45 Ethernet port (10 Mbps/100Mbps/Auto sensing) for LAN c) HD port for PC connectivity a) Data sharing hardware and software. b) Remote Control/Mouse c) All Power and communication cables necessary for above features 3. End Point for Multiparty (1+3) High Definition Video Conferencing The End Point shall be a point to point high definition video conferencing desktop system with Wireless remote control/mouse, camera built-in microphone, speakers, cables, 20" LCD screen, data content sharing ability for use over specified bandwidth of IP network (H.323)through RJ-45 and also ISDN (H.320) if specified, to give 25fps at 128Kbps and above. Main Features: a) System shall have the ability to conduct 4 sites multiparty conference. b) System shall have minimum 20" display for enabling full screen viewing of remote and Picture in Picture for near end video. c) It shall be possible to see both the near and far site on One Screen thus making most efficient use of a single display area. e) System shall have upto H.264 video coding support. g) System shall have upto G.728 audio coding support and suitable for 14KHz audio or better. h) System must support H.239 for sharing of video and graphics content during the video call i) Video Codec shall support 16:9 format for supporting LCD/ Plasma display. j) Shall have live High Definition video resolution upto 720p. k) Shall give 25 frames per second at 128Kbps & above. Page 25 of 33

26 l) System must have AES encryption for ISDN and IP calls. m) System shall have built-in stereo speakers for PC audio, with separate audio volume control from video conferencing functionality The system shall have the following: a) Audio input -1x 3.5 mm stereo mini jack for Headphone 1 x b) LAN Input - 1x RJ-45 Ethernet port (10 Mbps/100Mbps/Auto sensing) for LAN c) HD port for PC connectivity a) Data sharing hardware and software. c) Remote Control /Mouse d) Multiparty software for 4 party calling e) All Power and communication cables necessary for above features Schedule 6 Multipoint Conferencing Bridge for High Definition Multipoint Conferencing Bridge for IP connectivity with 10/20/30 sites on IP. The MCU shall have the capacity to support 10/20/30 video participants as specified on IP (H.232) at 2Mbps or above per participants. Main features: a) All equipments to be offered must be ITU-T standards related to video conferencing. b) MCU should support H.232, SIP & H.320. c) All components of the MCU solution - MCU chassis, Gatekeeper, Scheduling, Network Management and desktop client software should be from the same OEM d) It should be Closed/Chassis box MCU. e) The MCU chassis should have a power on/off switch so that when the MCU is not used it can be switched off. f) The MCU should support up to 10/20/30 HD video 2 Mbps or more at 720p in CP mode. g) The MCU should also support audio ports on IP in the same chassis. h) The MCU should have IP based and Gatekeeper, Scheduler and Network management systems and should be external to the system. i) The Gatekeeper should support 50 concurrent calls and 300 registrants on Page 26 of 33

27 an external server j) MCU should support Audio algorithms :(G.711 A/µ Law, G.722, G.722.1, G.723, G.728, G.729), or equivalent or better. k) MCU should support Telnet /USB/Rj45 l) MCU should support Telnet /USB/Rj45 m) MCU should support video resolutions (QCIF, CIF, 4CIF, 720p, VGA, SVGA and XGA) n) MCU should Frame rates (7.5 to 30FPS) o) The MCU should support H.243 Chair control functions for conference management by a terminal endpoint p) The MCU must support conference control using DTMF/GUI Control functions like invite, terminate conference, take or release chair control, mute, volume control, video layout change and block or unblock admission to a conference. q) The MCU must support Far End Camera Control, in voice activated and continuous presence modes, using H.281 Far End Camera Control r) The MCU must support H.239 and Duo-Video standards for sending/receiving multiple streams of video and presentation content without losing MCU port capacity s) The MCU must support layout choices 20 or more different layouts t) The MCU must be configurable to adapt the continuous presence screen layouts to accommodate newly added or dropped participants from the conference, up to 16 participants. u) The MCU must provide a complete `conference control' interface browser to support all `in call' management functions with drag and drop' manipulation of parties in the call and within screen layouts. v) The MCU must provide standards based method of compensating and correcting for packet loss media streams loss. w) The MCU must support a configurable text overlay function, wherein the Name, Site Identifier or H.323 terminal info is displayable. x) External Server based Gatekeeper (H.323) y) The MCU must support scaling to larger installations through Gatekeeper load balancing and call routing rules. z) The comprehensive solution shall include a software based H.323 Gatekeeper function. aa) The Gatekeeper must support advanced bandwidth management for calls between Gatekeeper sub-zones and remote zones to ensure proper call access control to the TCP/IP network for H.323 calls. bb) The Gatekeeper must support maximum bandwidth control per endpoint or per groups of endpoints cc) The Gatekeeper must support call Fallback policies per dialed number dd) The Gatekeeper must support Least Cost Routing ee) The Gatekeeper must support Line hunting for Gateway calls ff) The Gatekeeper must support H.450 Call Forward and Transfer Supplementary Services.(Optional) gg) The Gatekeeper must support call forwarding options including: unconditional forwarding, forward - busy and forward - no answer, and forward when not registered. hh) The Gatekeeper must support real time monitoring ii) The Gatekeeper must support advanced call fallback to ensure call completion Page 27 of 33