21016 elearning Courses

Transcription

1 21016 elearning Courses LabVolt Series Datasheet Festo Didactic en 03/2015

2 Table of Contents General Description 3 List of Available Training Systems 4 Equipment Description 5 2 Festo Didactic

3 General Description The book-based courseware for many training systems are also available in elearning format for users who prefer a computer-based approach. Each site-license elearning course is intended to be used with its corresponding training system. The elearning content presents units, exercises, and exercise procedures with enhanced graphics and/or animations to improve comprehension of the book-based content. Student manuals and instructor guides are incorporated into menu trees and accessible based on user rights. In most courses, the presentation of technical content is accompanied by voice-over narration to minimize the amount of onscreen reading. This datasheet lists all currently available elearning courses. Each is available in three learning platforms: eseries: this format is implemented using the Mind-Sight elearning System. SCORM: this format is SCORM-based, and designed to be hosted by a third-party, SCORM 1.2 compliant management system. Stand-Alone: this format is available on CD-ROM. It runs on a web browser and does not require any management system. (Note: student data, navigational tracking, and the saving of assessments are not available without an LMS. All user data is lost upon exiting the Stand-Alone curriculum.) Festo Didactic 3

4 List of Available Training Systems Qty Description Model number 1 Industrial Controls Training System - eseries 3161-E0 1 Industrial Controls Training System and Simulation Software - eseries 3161-J0 1 Programmable Logic Controller - Basic Programming - eseries 3280-E0 1 Refrigeration Training System - eseries 3490-E0 1 Advanced Hydraulics - eseries Hydraulics Fundamentals - eseries 6386-E0 1 Advanced Pneumatics - eseries Pneumatics Fundamentals - eseries 6486-E0 1 Electromechanical Training System - eseries 8980-E0 1 Radar Training System - eseries 9670-E0 1 DC and AC Power Circuits Training System - eseries E0 1 Grid-Tie Training System - eseries E0 1 Nacelle Operation and Maintenance - eseries E0 1 Solar Thermal Energy Training System - eseries E0 1 Grid-Tied Systems for Simulator - eseries Solar/Wind Energy Training System - eseries E0 1 Grid-Tied Systems with Simulator - eseries J0 1 Mechanical Training System - eseries E0 1 Pumps Training System - eseries E0 1 Piping Fundamentals - eseries E0 1 Industrial Wiring Training System - eseries E0 1 Temperature Processes - eseries E0 1 Pressure, Flow, and Level Processes - eseries E0 1 Preparatory Electricity & Electronics Training System - eseries E0 4 Festo Didactic

5 Equipment Description Industrial Controls Training System - eseries 3161-E0 This site-license elearning course bundle is intended to be used in conjunction with the Industrial Controls Training System, Series It contains five courses, all of which begin with a pretest and end with a posttest. Each course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted ( ed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading E Industrial Controls Training System - eseries 3161-F Industrial Controls Training System - SCORM 3161-G Industrial Controls Training System - Stand-Alone It is also possible to obtain each of the above elearning formats with the addition of the Industrial Controls Training System Simulation Software, Model 3161-H, a simulation software that allows students to complete all the exercises in the training system courseware on a computer without the need for any actual equipment. The following variants are available: 3161-J Industrial Controls Training System and Simulation Software - eseries 3161-K Industrial Controls Training System and Simulation Software - SCORM 3161-L Industrial Controls Training System and Simulation Software - Stand-Alone Festo Didactic 5

6 Topic Coverage Basic Controls Programmable Logic Controller Motor Drives Sensors Troubleshooting 6 Festo Didactic

7 Industrial Controls Training System and Simulation Software - eseries 3161-J0 This site-license elearning course bundle is intended to be used in conjunction with the Industrial Controls Training System, Series It contains five courses, all of which begin with a pretest and end with a posttest. Each course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted ( ed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading. The courseware also includes the Industrial Controls Training System Simulation Software, Model 3161-H, a simulation software that allows students to complete all the exercises in the training system courseware on a computer without the need for any actual equipment. The following variants are available: 3161-J Industrial Controls Training System and Simulation Software - eseries 3161-K Industrial Controls Training System and Simulation Software - SCORM 3161-L Industrial Controls Training System and Simulation Software - Stand-Alone Festo Didactic 7

8 Topic Coverage Basic Controls Programmable Logic Controller Motor Drives Sensors Troubleshooting 8 Festo Didactic

9 Programmable Logic Controller - Basic Programming - eseries 3280-E0 This eseries course introduces students to the basic principles of PLC programming. It is meant to be used in conjunction with a Programmable Logic Controller Trainer, Model 3240 or Model It contains one course which begins with a pretest and ends with a posttest. The course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted ( ed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of onscreen reading E: Programmable Logic Controller - Basic Programming - eseries 3280-F: Programmable Logic Controller - Basic Programming - SCORM 3280-G: Programmable Logic Controller - Basic Programming - Stand-Alone Topic Coverage Familiarization with the PLC Trainer and RSLogix Micro Programming Basics Online Operations Latching Timer Counter Sequencer Comparison Shift Register Festo Didactic 9

10 Refrigeration Training System - eseries 3490-E0 This site-license elearning course bundle is intended to be used in conjunction with the Refrigeration Training System, Model It contains one course, which begins with a pretest and ends with a posttest. The course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted ( ed) to the instructor. Presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading E Refrigeration Training System - eseries 3490-F Refrigeration Training System - SCORM 3490-G Refrigeration Training System - Stand-Alone Topic Coverage System Overview Refrigeration Fundamentals Refrigeration Components (Part 1) Refrigeration Components (Part 2) & Enthalpy Electrical Control of Refrigeration Systems Pressure & Temperature Control in Refrigeration Systems Thermostatic Expansion Valve Adjustment Troubleshooting 10 Festo Didactic

11 Advanced Hydraulics - eseries This site-license course bundle is intended to be used in conjunction with either the Hydraulics Training System, Series 6080, or the Hydraulics Simulation Software (LVSIM -HYD), Model Advanced Hydraulics contains three courses: Hydraulic Applications PLC, Servo Control of Hydraulic Systems, and Sensors, each of which has a pretest and posttest. Each course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted ( ed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading : Advanced Hydraulics - eseries : Advanced Hydraulics - SCORM : Advanced Hydraulics - Stand-Alone Festo Didactic 11

12 Hydraulics Fundamentals - eseries 6386-E0 This site-license course bundle is intended to be used in conjunction with either the Hydraulics Training System, Series 6080, or the Hydraulics Simulation Software (LVSIM -HYD), Model Hydraulics Fundamentals contains five courses: Introduction to Hydraulics, Fundamentals, Basic Circuits, Functional Circuits, and Troubleshooting, each of which has a pretest and posttest. The courses include the topics covered in the bookbased content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted ( ed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading E: Hydraulics Fundamentals - eseries 6386-F: Hydraulics Fundamentals - SCORM 6386-G: Hydraulics Fundamentals - Stand-Alone Upgrades: schools that are running the Tech-Lab version of Hydraulics Fundamentals may purchase an upgrade to the eseries course U: Hydraulics Fundamentals - eseries (course upgrade) Advanced variants of the above learning platforms are also available: : Advanced Hydraulics - eseries : Advanced Hydraulics - SCORM : Advanced Hydraulics - Stand-Alone 12 Festo Didactic

13 Advanced Pneumatics - eseries This site-license course bundle is intended to be used in conjunction with either the 6081 Pneumatics Bench or with 6485 LVSIM-Pneumatics software. Advanced Pneumatics contains three courses: Pneumatic Applications - PLC, Servo Control of Pneumatic Systems, and Sensors, each of which has a pretest and posttest. Each course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted ( ed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading : Advanced Pneumatics - eseries : Advanced Pneumatics - SCORM : Advanced Pneumatics - Stand-Alone Festo Didactic 13

14 Pneumatics Fundamentals - eseries 6486-E0 This site-license course bundle is intended to be used in conjunction with either the 6081 Pneumatics Bench or with 6485 LVSIM-Pneumatics software. Pneumatics Fundamentals contains four courses: Introduction to Pneumatics, Basic Physical Concepts, Basic Controls of Cylinders, and Basic Controls of Pneumatic Motors, each of which has a pretest and posttest. Each course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted ( ed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading E: Pneumatics Fundamentals - eseries 6486-F: Pneumatics Fundamentals - SCORM 6486-G: Pneumatics Fundamentals - Stand-Alone Upgrades: schools that are running the Tech-Lab version of Pneumatics Fundamentals may purchase an upgrade to the eseries course U: Pneumatics Fundamentals - eseries (course upgrade) Advanced variants of the above learning platforms are also available: : Advanced Pneumatics - eseries : Advanced Pneumatics - SCORM : Advanced Pneumatics - Stand-Alone 14 Festo Didactic

15 Electromechanical Training System - eseries 8980-E0 This site-license course is intended to be used in conjunction with either the Computer-Assisted 0.2 kw Electromechanical Training System, Model 8006, or the Electromechanical Systems Simulation Software, Model It contains all the technical content and exercise procedures of two manuals: Power Circuits and Transformers, Model 30328, and AC/DC Motors and Generators, Model Each course begins with a pretest and ends with a posttest. Each course includes the topics covered in the book-based content and their related hands-on exercises. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading E: Electromechanical Training System - eseries 8980-F: Electromechanical Training System - SCORM 8980-G: Electromechanical Training System - Stand-Alone Users running the Tech-Lab version of the Electromechanical Training System may upgrade their software to an eseries course using the following variant: 8980-U: Electromechanical Training System Upgrade - eseries Festo Didactic 15

16 Topic Coverage Power Circuits and Transformers AC/DC Motors and Generators 16 Festo Didactic

17 Radar Training System - eseries 9670-E0 The Radar Training System SW Package, Model 9670-E, makes available the Radar Training System exercise assessments and unit tests delivered in elearning format. elearning content for the book-based courses is not available, only assessments and a license agreement E Radar Training System - eseries 9670-F Radar Training System - SCORM 9670-G Radar Training System - Stand-Alone Festo Didactic 17

18 DC and AC Power Circuits Training System - eseries E0 This site-license elearning course is intended to be used in conjunction with the DC and AC Power Circuits Training System, Model This elearning course covers courses DC Power Circuits and Single-Phase AC Power Circuits, each of which has a pretest and posttest. Each course includes the topics covered in the bookbased content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed sheets may be printed, saved to a specific location, or sent via to the instructor. Presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading E DC and AC Power Circuits Training System - eseries F DC and AC Power Circuits Training System - SCORM G DC and AC Power Circuits Training System - Stand-Alone 18 Festo Didactic

19 Grid-Tie Training System - eseries E0 This site-license course is intended to be used in conjunction with the Grid-Tie Training System, Model It contains all the technical content and exercise procedures required to train future photovoltaic (PV) solar installers. The course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted ( ed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading E Grid-Tie Training System - eseries F Grid-Tie Training System - SCORM G Grid-Tie Training System - Stand-Alone Topic Coverage Trainer Familiarization and Wiring Safety Practices Lockout/Tagout Procedure Components Installation and Commissioning Festo Didactic 19

20 Nacelle Operation and Maintenance - eseries E0 This site-license elearning course is intended to be used in conjunction with the Wind Turbine Nacelle Training System, Model It contains one course, which begins with a pretest and ends with a posttest. The course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted ( ed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading E: Nacelle Operation and Maintenance - eseries F: Nacelle Operation and Maintenance - SCORM G: Nacelle Operation and Maintenance - Stand-Alone Topic Coverage Nacelle Familiarization, Safety, and Control System User Interface and Wind Simulation Hub and Low-Speed Shaft Gearbox, Coupling, and Alignment Basic Hydraulic Circuit and Brakes Electrical Circuit and Panel Troubleshooting 20 Festo Didactic

21 Solar Thermal Energy Training System - eseries E0 This site-license elearning course is intended to be used in conjunction with the Solar Thermal Energy Training System, Model It contains one course, which begins with a pretest and ends with a posttest. The course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted ( ed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading E Solar Thermal Energy Training System - eseries F Solar Thermal Energy Training System - SCORM G Solar Thermal Energy Training System - Stand-Alone Topic Coverage Introduction to Solar Thermal Energy Solar Thermal Energy Systems Multi-Loop Systems Festo Didactic 21

22 Grid-Tied Systems for Simulator - eseries This site-license elearning course is intended to be used in conjunction with the Solar/Wind Energy Training System, Model 46120, and requires the Grid-Tied Simulation Software, Model A. It contains one course, which begins with a pretest and ends with a posttest. The course topics include Grid-Connected Equipment, Utility-Interactive Software, and The NEC. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted ( ed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of onscreen reading. The Grid-Tied Systems Simulation Software, Model A, expands on the knowledge acquired about solar and wind energy, and enables students to simulate the connection of the system to the ac power network, forming a grid-tied system. The following learning platforms are available : Grid-Tied Systems for Simulation Software - eseries : Grid-Tied Systems for Simulation Software - SCORM : Grid-Tied Systems for Simulation Software - Stand-Alone It is possible to combine the Grid-Tied Systems elearning course with the Grid-Tied Systems Simulation Software into a single bundle. The following variants are available: J: Grid-Tied Systems with Simulation Software - eseries K: Grid-Tied Systems with Simulation Software - SCORM L: Grid-Tied Systems with Simulation Software - Stand-Alone 22 Festo Didactic

23 Solar/Wind Energy Training System - eseries E0 This site-license elearning course is intended to be used in conjunction with the Solar/Wind Energy Training System, Model It contains one course, which begins with a pretest and ends with a posttest. The course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted ( ed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading E: Solar/Wind Energy Training System - eseries F : Solar/Wind Energy Training System - SCORM G: Solar/Wind Energy Training System - Stand-Alone An additional elearning course is available for use in conjunction with the Grid-Tied Systems Simulation Software, Model A. The software expands on the knowledge acquired about solar and wind energy, and enables students to simulate the connection of the system to the ac power network, forming a grid-tied system. The following learning platforms are available : Grid-Tied Systems for Simulation Software - eseries : Grid-Tied Systems for Simulation Software - SCORM : Grid-Tied Systems for Simulation Software - Stand-Alone Finally, it is possible to combine the Grid-Tied Systems elearning course with the Grid-Tied Systems Simulation Software into a single bundle. The following variants are available: J: Grid-Tied Systems with Simulation Software - eseries K: Grid-Tied Systems with Simulation Software - SCORM L: Grid-Tied Systems with Simulation Software - Stand-Alone Festo Didactic 23

24 Topic Coverage Energy Fundamentals Trainer Familiarization and Safety Solar Module Wind Turbine Solar Wind Systems Going Green 24 Festo Didactic

25 Grid-Tied Systems with Simulator - eseries J0 This site-license elearning course is intended to be used in conjunction with the Solar/Wind Energy Training System, Model 46120, and combines the Grid-Tied System for Simulation Software elearning course with the Grid-Tied System Simulation Software in a single bundle. It contains one course, which begins with a pretest and ends with a posttest. The course topics include Grid-Connected Equipment, Utility-Interactive Software, and The NEC. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted ( ed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading. The following learning platforms are available J: Grid-Tied Systems with Simulation Software - eseries K: Grid-Tied Systems with Simulation Software - SCORM L: Grid-Tied Systems with Simulation Software - Stand-Alone Festo Didactic 25

26 Mechanical Training System - eseries E0 This site-license course bundle is intended to be used in conjunction with the Mechanical Training System. The Mechanical Training System contains four courses, each of which has a pretest and posttest. Each course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted ( ed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading E: Mechanical Training System - eseries F: Mechanical Training System - SCORM G: Mechanical Training System - Stand-Alone Topic Coverage Level 1 - Introduction, Belt Drives, Chain Drives, and Gear Drives Level 2 - More Belt and Chain Drives, Alignment, Couplings, and Lubrication Level 3 - More Gear Drives, Bearings, Gaskets, and Seals Level 4 - Clutches, Brakes, Ball Screws, and Linear Bearings 26 Festo Didactic

27 Pumps Training System - eseries E0 This site-license course bundle is intended to be used in conjunction with the Pumps Training System, Series It contains five courses, each of which has a pretest and posttest. Each course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted ( ed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading. It is important to note that if a lab wants to complete Rotary Pumps, Reciprocating Pumps, and Centrifugal Pumps they will need to purchase additional pumps from the Optional Equipment list E: Pumps Training System - eseries F: Pumps Training System - SCORM G: Pumps Training System - Stand-Alone Topic Coverage Single Pump Systems Multiple Pump Systems Rotary Pumps Reciprocating Pumps Centrifugal Pumps Festo Didactic 27

28 Piping Fundamentals - eseries E0 This site-license course bundle is intended to be used in conjunction with the Piping Training System, Series It contains one course of 9 exercises, with a pretest and a posttest. The course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted ( ed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading E: Piping Fundamentals - eseries F: Piping Fundamentals - SCORM G: Piping Fundamentals - Stand-Alone Topic Coverage Installation of Metal Struts Identification Layout Measurement Calculation Cutting Reaming Threading Assembly Threaded, Barb, Cemented, and Flare Fittings 28 Festo Didactic

29 Industrial Wiring Training System - eseries E0 This site-license course bundle is to be used in conjunction with the Industrial Wiring Training System, Model Industrial Wiring contains two courses, each of which begins with a pretest and concludes with a posttest. Each course includes the topics covered in the book-based content and their related hands-on exercises. Exercise procedures are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted ( ed) to the instructor. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading E: Industrial Wiring Training System - eseries F: Industrial Wiring Training System - SCORM G: Industrial Wiring Training System - Stand-Alone Topic Coverage Enclosures and Conduits Electrical Power Distribution Electrical Wiring Festo Didactic 29

30 Temperature Processes - eseries E0 This site-license course is intended to be used in conjunction with the Pressure, Flow, Level, and Temperature Process Training Systems, Series It fully covers temperature processes and is compatible with either the HART or FOUNDATION Fieldbus communication protocols. This course has four units, each of which has a pretest and a posttest. Each course includes the topics covered in the book-based content and their related hands-on exercises. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading E: Temperature Processes - eseries F: Temperature Processes - SCORM G: Temperature Processes - Stand-Alone Topic Coverage Familiarization with the Training System Measurement Process Control Heat Exchangers and Advanced Temperature Measurement (requires an additional equipment purchase, Advanced Temperature and Heat Exchanger Add-on) 30 Festo Didactic

31 Pressure, Flow, and Level Processes - eseries E0 This site-license course is intended to be used in conjunction with the Pressure, Flow, Level, and Temperature Process Training Systems, Series It fully covers pressure, flow, and level processes and is compatible with either the HART or FOUNDATION Fieldbus communication protocols. This course has four units, each which has a pretest and a posttest. Each course includes the topics covered in the book-based content and their related hands-on exercises. Exercise presentation of technical content is accompanied by voiceover narration to minimize the amount of on-screen reading E: Pressure, Flow, and Level Processes - eseries F: Pressure, Flow, and Level Processes - SCORM G: Pressure, Flow, and Level Processes - Stand-Alone Topic Coverage Familiarization with the Instrumentation & Process Control Training System Measurement Pressure, Flow, and Level Introduction to Process Control Pressure, Flow, and Level Advanced Process Control Pressure, Flow, and Level (Requires the Pressure/Flow/Level Advanced Add-On, Model 3530-M) Festo Didactic 31

32 Preparatory Electricity & Electronics Training System - eseries E0 This site-license course bundle is intended to be used in conjunction with the Preparatory Electricity & Electronics Training System, Series Exercise procedures only are presented in enhanced PDF format. Completed exercises may be printed, saved to a specific location, and submitted ( ed) to the instructor. Technical content is not available for this course in elearning format E: Preparatory Electricity & Electronics Training System - eseries F: Preparatory Electricity & Electronics Training System - SCORM G: Preparatory Electricity & Electronics Training System - Stand-Alone Topic Coverage Fundamentals of AC/DC Basic Electronics Motors and Generators 32 Festo Didactic

33 Reflecting the commitment of Festo Didactic to high quality standards in product, design, development, production, installation and service, our manufacturing and distribution facility has received the ISO 9001 certification. Festo Didactic reserves the right to make product improvements at any time and without notice and is not responsible for typographical errors. Festo Didactic recognizes all product names used herein as trademarks or registered trademarks of their respective holders. Festo Didactic Inc All rights reserved. Festo Didactic GmbH & Co. KG Rechbergstrasse Denkendorf Germany P. +49(0)711/ F. +49(0)711/ Festo Didactic Inc. 607 Industrial Way West Eatontown, NJ United States P F Festo Didactic Ltée/Ltd 675 rue du Carbone Québec QC G2N 2K7 Canada P F Festo Didactic 33