McAfee Cloud Identity Manager

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "McAfee Cloud Identity Manager"

Transcription

1 NetSuite Cloud Connector Guide McAfee Cloud Identity Manager version 2.0 or later

2 COPYRIGHT Copyright 2013 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means without the written permission of McAfee, Inc., or its suppliers or affiliate companies. TRADEMARK ATTRIBUTIONS McAfee, the McAfee logo, Avert, epo, epolicy Orchestrator, Foundstone, GroupShield, IntruShield, LinuxShield, MAX (McAfee SecurityAlliance Exchange), NetShield, PortalShield, Preventsys, SecureOS, SecurityAlliance, SiteAdvisor, SmartFilter, Total Protection, TrustedSource, Type Enforcement, VirusScan, and WebShield are registered trademarks or trademarks of McAfee, Inc. or its subsidiaries in the United States and other countries. LICENSE INFORMATION License Agreement NOTICE TO ALL USERS: CAREFULLY READ THE APPROPRIATE LEGAL AGREEMENT CORRESPONDING TO THE LICENSE YOU PURCHASED, WHICH SETS FORTH THE GENERAL TERMS AND CONDITIONS FOR THE USE OF THE LICENSED SOFTWARE. IF YOU DO NOT KNOW WHICH TYPE OF LICENSE YOU HAVE ACQUIRED, PLEASE CONSULT THE SALES AND OTHER RELATED LICENSE GRANTOR PURCHASE ORDER DOCUMENTS THAT ACCOMPANIES YOUR SOFTWARE PACKAGING OR THAT YOU HAVE RECEIVED SEPARATELY AS PART OF THE PURCHASE (AS A BOOKLET, A FILE ON THE PRODUCT CD, OR A FILE AVAILABLE ON THE WEBSITE FROM WHICH YOU DOWNLOADED THE SOFTWARE PACKAGE). IF YOU DO NOT AGREE TO ALL OF THE TERMS SET FORTH IN THE AGREEMENT, DO NOT INSTALL THE SOFTWARE. IF APPLICABLE, YOU MAY RETURN THE PRODUCT TO MCAFEE OR THE PLACE OF PURCHASE FOR A FULL REFUND. 2 McAfee Cloud Identity Manager NetSuite Cloud Connector Guide

3 Contents 1.0 Introduction to McAfee Cloud Identity Manager Supported environments Supported browsers Application portal Management Console Available documentation Technical support Configuring SSO for a NetSuite User NetSuite Cloud Connector Overview Generating an RSA Key Pair Using OpenSSL Configuring a NetSuite Cloud Connector Select the Cloud Application Type Specifying an Identity Connector Select an Existing Identity Connector Create a New Identity Connector Configure Credential Mapping for a NetSuite Cloud Connector Configuring SSO for a NetSuite Cloud Connector Configure SSO for a NetSuite Cloud Connector Apply an Authorization Policy to a NetSuite Cloud Connector Configure the default policy action Configure policy rules and add them to the policy Policy conditions and their Boolean expressions Expression editor examples Review the NetSuite Cloud Connector Configuration...29 McAfee Cloud Identity Manager NetSuite Cloud Connector Guide 3

4 4 McAfee Cloud Identity Manager NetSuite Cloud Connector Guide

5 1.0 Introduction to McAfee Cloud Identity Manager McAfee Cloud Identity Manager (Cloud Identity Manager, formerly Intel Expressway Cloud Access 360-SSO) simplifies the management and secures the use of cloud, Software as a Service (SaaS), and web applications for companies and large organizations. Service and application providers can also use Cloud Identity Manager to simplify and improve the authentication process for their customers. Cloud Identity Manager provides support for the following features: Extensible framework Web single sign on (SSO) Multiple authentication methods Credential mapping and user provisioning Authorization policies and access control enforcement Event auditing and monitoring Connectors for popular cloud services and applications Web-based Management Console Cloud Identity Manager runs as a stand-alone server and is configured by an administrator using a webbased Management Console accessible from a web browser. For information about installing Cloud Identity Manager as a standalone server or as a cluster of servers, see the McAfee Cloud Identity Manager Installation Guide. For information about configuring Cloud Identity Manager in the Management Console, see the McAfee Cloud Identity Manager Product Guide. Cloud Identity Manager provides connectors for many popular cloud services and applications, including Google Apps and Salesforce.com. These connectors are built in to Cloud Identity Manager and simplify the deployment of the cloud service or application in an organization. Web SSO requires configuration in the Management Console and in the cloud application s user interface. Instructions for configuring SSO on the cloud application side are included in the documentation set. For customers who have Java-based or.net web applications that do not support SAML2 authentication, Cloud Identity Manager provides a custom connector. For information about integrating Java-based and.net web applications with Cloud Identity Manager, see the McAfee Cloud Identity Manager Integration Guide. For software developers who want to write their own cloud service connectors or authentication modules, Cloud Identity Manager provides an SDK. For more information about the SDK, see the McAfee Cloud Identity Manager Developer s Guide. McAfee Cloud Identity Manager NetSuite Cloud Connector Guide 5

6 1.1 Supported environments Cloud Identity Manager supports these environments. Version Architecture IA-32 Intel 64 Linux Operating System Red Hat Enterprise Linux Server and Advanced Platform 5.0 Windows Operating System Yes Yes Windows Server 2003 Standard Edition Yes Yes Windows Server 2003 DataCenter Edition Yes Yes Windows Server 2003 Enterprise Edition Yes Yes Windows Server 2008 Yes Yes 1.2 Supported browsers Cloud Identity Manager supports different browsers for the application portal and the Management Console Application portal For end users who seek access to SaaS and web applications through a portal using Cloud Identity Manager identity services, Cloud Identity Manager supports the following desktop and mobile web browsers. Note that Cloud Identity Manager services are running in the background and are not visible to the end user. Desktop browsers Google Chrome 16 Mozilla Firefox 9 Microsoft Internet Explorer 7, 8, and 9 Safari Mobile browsers Android 2.0 devices and WebKit browser ios devices and Safari browser Management Console The Cloud Identity Manager Management Console is a web-based user interface that provides administrators with a single, central point of management and control through a web browser on a local computer. For Management Console administrators, Cloud Identity Manager supports the following desktop and mobile web browsers. Desktop browsers Firefox 9 Internet Explorer 7, 8, and 9 Mobile browsers None are currently supported. 6 McAfee Cloud Identity Manager NetSuite Cloud Connector Guide

7 1.3 Available documentation The Cloud Identity Manager documentation set includes the following guides: McAfee Cloud Identity Manager Product Guide A complete guide to the Management Console and the configuration tasks needed to administer Cloud Identity Manager McAfee Cloud Identity Manager Developer s Guide Provides information for software developers who want to write custom Java code that extends Cloud Identity Manager functionality McAfee Cloud Identity Manager Installation Guide Includes the tasks and procedures that you need to install and remove Cloud Identity Manager as a standalone server on Microsoft Windows and Linux operating system platforms McAfee Cloud Identity Manager Integration Guide Provides instructions on how to integrate Javabased and.net web applications that do not support SAML2 authentication with Cloud Identity Manager Note: In addition to these guides, there are separate guides that document how to configure the different Cloud Connectors. For more information, see the McAfee Cloud Identity Manager Product Guide. 1.4 Technical support For technical assistance, contact McAfee support by one of the following options: Support portal: Phone number: McAfee Cloud Identity Manager NetSuite Cloud Connector Guide 7

8 8 McAfee Cloud Identity Manager NetSuite Cloud Connector Guide

9 2.0 Configuring SSO for a NetSuite User NetSuite supports Identity Provider (IdP)-initiated single sign-on (SSO). In IdP-initiated SSO, the end user sends the request for access to Cloud Identity Manager. Cloud Identity Manager initiates SSO by forwarding the request to an identity store or authentication service. In the context of providing identity and SSO services, Cloud Identity Manager is also a Service Provider (SP). Configuring SSO for NetSuite users includes the following tasks. For more information, see the corresponding sections. For an overview, see section 2.1 NetSuite Cloud Connector Overview. Generating an RSA Key Pair Using OpenSSL See section 2.2 Generating an RSA Key Pair Using OpenSSL. Configuring a NetSuite Cloud Connector in the Cloud Identity Manager Management Console See section 3.0 Configuring a NetSuite Cloud Connector. Note: After you configure the NetSuite Cloud Connector, the first login to NetSuite must be to the NetSuite administrator s account. McAfee Cloud Identity Manager NetSuite Cloud Connector Guide 9

10 2.1 NetSuite Cloud Connector Overview NetSuite s inbound single sign-on feature allows users to authenticate using Cloud Identity Manager and then access NetSuite without having to log in again. Cloud Identity Manager passes authentication information to NetSuite with an encrypted token. When integrated with NetSuite, Cloud Identity Manager is called the external application. 1. The user requests access to a NetSuite application or Web store through Cloud Identity Manager. 2. Cloud Identity Manager authenticates the user against the Identity Provider. 3. Cloud Identity Manager redirects the user to NetSuite with an encrypted token and the authentication information. 4. NetSuite decrypts the token and checks the timestamp. If the timestamp is valid, NetSuite grants access to the user. 10 McAfee Cloud Identity Manager NetSuite Cloud Connector Guide

11 2.2 Generating an RSA Key Pair Using OpenSSL An RSA key pair is needed for encrypting and decrypting security tokens. Cloud Identity Manager uses the private key to encrypt the security token, and NetSuite uses the public key paired with the private key to decrypt the security token. Generating the public-private key pair and distributing the keys includes the following steps: 1. Generating a key pair using OpenSSL. 2. Sending the public key to NetSuite. 3. Importing the private key in Cloud Identity Manager. To generate a key pair and distribute the keys, you: 1. Download the inbound single sign-on kit from NetSuite: 2. Install OpenSSL from the OpenSSL subdirectory in the inbound single sign-on kit provided by NetSuite or from the OpenSSL website: 3. Type openssl in a command prompt. The OpenSSL prompt opens. 4. At the OpenSSL prompt, type the following command: genrsa out <privkey.pem> -rand <f1><s><f2><s><f3><s><f4><s><f5> 1024 <privkey.pem> Specifies the name of the output file. <f1>... <f5> Specify the names of five files that are used as random seeds. <s> Specifies a separator, as follows: ; semicolon Windows, comma OpenVMS : colon all other operating systems A private key is generated having the length Convert the private key from the PEM format to the DER format, as follows: java com.netledger.forpartners.encryption.pem2der <privkey.pem> <privkey.der> <privkey.pem> Specifies the name of the output file in PEM format. <privkey.der> Specifies the name of the output file in DER format. 6. Extract the public key from the private key, as follows: java com.netledger.forpartners.encryption.priv2pub <privkey.der> <pubkey.der> <privkey.der> Specifies the private key generated using OpenSSL. <pubkey.der> Specifies the public key extracted from the private key. 7. Send the public key to NetSuite by a. In the subject line, include your NetSuite Company ID and your company s name. b. In the message body, include the address of the NetSuite account administrator who is setting up inbound single sign-on. c. Attach the public key DER file in zipped format. 8. Import the private key in Cloud Identity Manager. For more information, see section 3.4 Configuring SSO for a NetSuite Cloud Connector. McAfee Cloud Identity Manager NetSuite Cloud Connector Guide 11

12 12 McAfee Cloud Identity Manager NetSuite Cloud Connector Guide

13 3.0 Configuring a NetSuite Cloud Connector A Cloud Connector is the configuration that allows Cloud Identity Manager to connect to and provide services for a cloud application. When a NetSuite Cloud Connector is configured, Cloud Identity Manager can provide identity and SSO services for NetSuite users. You configure a NetSuite Cloud Connector in the Cloud Connector wizard in the Cloud Identity Manager Management Console. Configuring a NetSuite Cloud Connector in the wizard involves the following steps. For more information about each step, see the corresponding sections: 1. Cloud Application Type See section 3.1 Select the Cloud Application Type. 2. Identity Connector See section 3.2 Specifying an Identity Connector. 3. Credential Mapping See section 3.3 Configure Credential Mapping for a NetSuite Cloud Connector. 4. SSO Configuration See section 3.4 Configuring SSO for a NetSuite Cloud Connector. 5. Authorization Enforcement See section 3.5 Apply an Authorization Policy to a NetSuite Cloud Connector. 6. Review See section 3.6 Review the NetSuite Cloud Connector Configuration. McAfee Cloud Identity Manager NetSuite Cloud Connector Guide 13

14 3.1 Select the Cloud Application Type A Cloud Connector is the configuration that allows Cloud Identity Manager to connect to and provide services for a cloud application. For example, a NetSuite Cloud Connector is the configuration that allows Cloud Identity Manager to connect to a NetSuite application and to provide SSO, SLO, and other services. To select the NetSuite cloud application type 1. Select the Cloud Connectors tab in the Management Console, and then click New Cloud Connector. The Cloud Connector wizard opens on the Cloud Application Type step. 2. Select the cloud application type: NetSuite. Note: If the application is not one of the built-in types shown in the Cloud Application Type window, click More to open the More Applications window. This window shows all plug-in cloud application types in the Cloud Identity Manager system. 3. Type a name for the NetSuite Cloud Connector in the Cloud Connector Name field. Note: The name can contain only letters, numbers, and the following characters:., _ and -. The name cannot contain spaces or exceed 64 characters in length and is not case-sensitive. Specify a meaningful name. For example, a name that identifies the Cloud Connector-Identity Connector combination is more useful than a URL, which can change. 4. Click Next. The Identity Connector step opens. 3.2 Specifying an Identity Connector To specify an Identity Connector, you select an existing Identity Connector or create a new one. There are six types of Identity Connectors: LDAP Integrated Windows Authentication with Active Directory (IWA-AD) ECA360 Token Authentication Authentication Chain SAML2 Proxy Central Authentication Service (CAS) For LDAP and IWA-AD Identity Connectors, identity information is retrieved from an identity store. To configure these Identity Connectors, you specify the ID of the identity store containing the identity information and how to search the specified identity store. To specify the search, you configure the following LDAP parameters: Base DN Specifies where to start searching in the LDAP tree Search Attribute Specifies the user attribute to retrieve from the identity store Search Scope Specifies how many levels to search in the LDAP tree below the Base DN For CAS and other Identity Connectors, identity information is retrieved from an authentication result provided by an external authentication service. To configure one of these Identity Connectors, you specify fields specific to each connector type. 14 McAfee Cloud Identity Manager NetSuite Cloud Connector Guide

15 3.2.1 Select an Existing Identity Connector If the Identity Connector is already configured, you can select it on the Identity Connector step of the Cloud Connector wizard. The settings on this step depend on the Identity Connector you select. For example, the Enable Additional Authentication Module(s) area is only displayed when the following conditions are met: The selected Identity Connector type is an authentication chain. When the authentication chain was created, one or more authentication modules were configured as Determined by Cloud Connector on the Policy Setting step of the Authentication Module wizard. To enable these modules, select the checkboxes in the Enable Additional Authentication Module(s) area. For more information, see the McAfee Cloud Identity Manager Product Guide. To select an existing Identity Connector 1. Select an existing Identity Connector from the list in the window, or click New Identity Connector to create a new one and add it to the list. 2. (Optional) To test the connection to the Identity Connector, click Test. Note: The Test button is disabled for Identity Connectors of type authentication chain. 3. (Optional) Select a user-defined portal category from the Category drop-down list, click Manage Categories, or both. For more information, see the next section. 4. (Optional) In the Enable Additional Authentication Module(s) area, select the checkboxes corresponding to the authentication modules you want to enable. Note: This area is only displayed when one or more modules in an authentication chain are configured as Determined by Cloud Connector. Example: OTP () 5. Click Next. The Identity Connector configuration is saved. McAfee Cloud Identity Manager NetSuite Cloud Connector Guide 15

16 Manage User-defined Portal Categories On the Identity Connector step of the Cloud Connector wizard, you can assign a user-defined portal category to the Cloud Connector that you are configuring. User-defined portal categories allow you to group applications having the same category on the application portal associated with that Identity Connector. For example, all applications tagged with the Cash Management category are displayed together on the portal. Each Identity Connector has its own menu of categories. To manage user-defined portal categories 1. To manage user-defined portal categories, click Manage Categories on the Identity Connector step of the Cloud Connector wizard. The Manage Categories dialog box opens. To add a new category, click Add, provide values for the fields in the Add Category dialog box, and click Save. URL Specifies the portal URL that you can use to access the Cloud Identity Manager service and the category ID. This value is provided for you. Name Specifies the name of the new category. Description (Optional) Specifies a description of the new category. To edit an existing category, click Edit, modify the values in the fields in the Edit Category dialog box, and click Save. To remove an existing category, select it in the Manage Categories dialog box, and click Remove. 2. Click OK. The Manage Categories dialog box closes, and the categories are saved and added to the Categories drop-down list in the Identity Connector window. 16 McAfee Cloud Identity Manager NetSuite Cloud Connector Guide

17 3.2.2 Create a New Identity Connector To create a new Identity Connector, you specify a name and an Identity Connector type. Fields open that correspond to the type that you select. To configure an LDAP or IWA-AD Identity Connector, you create a new or use an existing identity store. To configure a CAS or other Identity Connector, you specify fields specific to that connector type. You begin this procedure on the Identity Connector step of the Cloud Connector wizard. To create a new Identity Connector 1. Click New Identity Connector. The New Identity Connector dialog box opens. 2. Type a name in the Identity Connector field. 3. Select one of the following types from the Identity Connector Type drop-down list: LDAP Integrated Windows Authentication with Active Directory (IWA-AD) ECA360 Token Authentication Authentication Chain SAML2 Proxy Central Authentication Service (CAS) The New Identity Connector dialog box expands to show the parameters required to configure the selected Identity Connector type. 4. Configure the parameters required for the specified Identity Connector type. For more information, see the McAfee Cloud Identity Manager Product Guide. 5. Click Save Identity Connector. The Identity Connector configuration is saved. McAfee Cloud Identity Manager NetSuite Cloud Connector Guide 17

18 3.3 Configure Credential Mapping for a NetSuite Cloud Connector To configure credential mapping, specify the subject type and source. The subject is the user whose identity is authenticated. The subject type is the type of identity information. For example, identity information can be a constant string value, an authentication result, or the result of an expression. The subject source is a value that corresponds to the specified subject type. For example, if the subject type is an authentication result, the subject source is the result of an authentication decision. Because the subject source uniquely identifies the subject or user, it must have a unique value. This procedure begins on the Credential Mapping step of the Cloud Connector wizard. To configure credential mapping for a NetSuite Cloud Connector 1. Select a subject type from the Subject Type drop-down list: CONSTANTS Specifies a constant string value. AUTHN_RESULT_FIELD Specifies the result of an authentication decision. EXPRESSION Specifies the result of an expression. 2. Type the value corresponding to the specified subject type in the Subject Source field. 3. Click Next. The SSO Configuration window opens. 18 McAfee Cloud Identity Manager NetSuite Cloud Connector Guide

19 3.4 Configuring SSO for a NetSuite Cloud Connector To configure SSO for a NetSuite Cloud Connector, you generate an RSA public-private key pair using OpenSSL, send the public key to NetSuite, and import the private key in Cloud Identity Manager. Cloud Identity Manager uses the private key to encrypt the token. NetSuite uses the public key paired with the private key to decrypt the token. The token is a hex-encoded, encrypted string containing the following information: Company ID Specifies the string assigned by the Cloud Identity Manager administrator to the company associated with the end user. The Company ID is also known as the remote company ID. The string value cannot contain spaces. User ID Specifies the string that Cloud Identity Manager uses to uniquely identify the user. The string value cannot contain spaces. Timestamp Specifies the time of token creation as a decimal string that represents the number of milliseconds since January 1, 1970, 00:00:00 GMT. Note: Before encryption, the token string has the following format: <companyid><space><userid><space><timestamp> For information about generating the public-private key pair, see section 2.2 Generating an RSA Key Pair Using OpenSSL. To import the private key in Cloud Identity Manager, see section Configure SSO for a NetSuite Cloud Connector. You also provide values for the parameters that Cloud Identity Manager uses to build the redirect URL. The redirect URL is based on the target NetSuite service, as follows. Application When the target service is a NetSuite application, the redirect URL is based on the string: <token> Specifies the hex-encoded, encrypted token string. Web Store When the target service is a NetSuite Ecommerce website, the redirect URL is based on the string: In addition to specifying the target NetSuite service, you provide values for the following parameters. Cloud Identity Manager uses these values to build the redirect URL from the base URL. Some parameters are only required for one of the two NetSuite target services: Company ID (pacct) Assigned by the Cloud Identity Manager administrator to the company associated with the end user. Partner ID (pid) Assigned by NetSuite Customer Support to Cloud Identity Manager after you purchase the inbound single sign-on feature. Landing URL (landingurl) Optional single sign-on login page. Hide Login Page (hideloginpage) Optional Boolean value. Return URL (returnurl) Required when Hide Login Page is TRUE. Site Domain Optional custom domain name for your Web store. NetSuite Company ID (c) Assigned by NetSuite and required for Web store access when Site Domain is not set. Site ID (n) Required for Web store access when Site Domain is not set. You can locate the site ID on the preview page of your website. Example Redirect URL for a NetSuite Application: &pid=36530&pacct=lenkelectriccompany Example Redirect URL for a Web Store: &pid=36530&hideloginpage=true&returnurl= &c=896983&n=1 McAfee Cloud Identity Manager NetSuite Cloud Connector Guide 19

20 3.4.1 Configure SSO for a NetSuite Cloud Connector To configure SSO for a NetSuite Cloud Connector, you import the private key that Cloud Identity Manager uses to encrypt the token, and you provide values for the parameters that Cloud Identity Manager uses to build the redirect URL. To configure SSO for a NetSuite Cloud Connector 1. Click Upload Key. The Import Key dialog box opens. 2. Click Browse to locate and open the private key file. Example: netsuite_private-key.der 3. Click Upload Certificate to import the private key in Cloud Identity Manager. 4. Click Ok to close the Import Key dialog box and configure SSO. 5. In the SSO Configuration window, complete the following fields: Company ID (pacct) Specifies the identifier assigned by the Cloud Identity Manager administrator to the company associated with the end user. The Company ID is also known as the remote company ID. Note: The Company ID cannot contain any spaces. Example: pacct=lenkelectriccompany Partner ID (pid) Specifies the identifier assigned by NetSuite Customer Support to Cloud Identity Manager. NetSuite associates this value with the public key Cloud Identity Manager provides and uses the public key to decrypt the token. Example: pid= McAfee Cloud Identity Manager NetSuite Cloud Connector Guide

21 Target service Specifies the NetSuite service to which Cloud Identity Manager redirects the user with the encrypted token (a). The target service has one of two values: Application (app) The user is redirected to a NetSuite application. Web Store (site) The user is redirected to a NetSuite Ecommerce website. Landing URL (landingurl) (Optional) Specifies the webpage to which NetSuite redirects the user. This page is called the inbound single sign-on login page. Application default: user s home page Web Store default: site home page Example: landingurl= Hide Login Page (hideloginpage) Specifies whether to use the Return URL s value in place of the Landing URL s value, as follows: TRUE Select this checkbox to use the value specified by the Return URL (hideloginpage=true). FALSE Deselect this checkbox to use the value specified by the Landing URL (hideloginpage=false). Return URL (returnurl) Specifies a webpage to which SSO users are redirected when they log out, a session times out, or errors occur. Note: This parameter is required when Hide Login Page is set to TRUE. Default: returnurl=landingurl Example: returnurl= Specify Site Domain (Web Store) Specifies whether to use the default NetSuite domain or a custom domain for your company s Web store, as follows: TRUE Select this checkbox to use a custom domain for your company s Web store. FALSE Deselect this checkbox to use the default NetSuite domain (checkout.netsuite.com). Site Domain (Web Store) Specifies a custom domain for accessing your company s Web store. Example: shop.lec.com NetSuite Company ID (c) (Web Store) Specifies the identifier assigned by NetSuite to your company. This value is required when the target service is a Web store, and the domain setting is the NetSuite default. Example: c= Site ID (n) (Web Store) Identifies the website when you have more than one website in your Web store. This value is required when the target service is a Web store and the domain setting is the NetSuite default. Example: n=1 Note: You can view the site ID on the website preview page by navigating to Setup Web Site Preview Web Site. 6. Click Next. The Authorization Enforcement window opens. McAfee Cloud Identity Manager NetSuite Cloud Connector Guide 21

22 3.5 Apply an Authorization Policy to a NetSuite Cloud Connector On the Authorization Enforcement step of the Cloud Connector wizard, you can build an authorization policy that determines which users can access your cloud application and under what conditions. To build the policy, you configure individual policy rules and add them to the overall policy. Each rule consists of an expression, which can be made up of sub expressions. Each rule has an action, as does the overall policy. The rule action is to permit or deny access to your cloud application when the rule evaluates to TRUE. The overall policy action the default action is to permit or deny access to your cloud application when none of the rules in the policy evaluates to TRUE. When the policy configuration area first opens, the default policy action is set to deny access Configure the default policy action Configure the overall policy action for when none of the rules in the policy evaluates to TRUE. 1. Select the Enable Authorization Policy checkbox. The policy configuration area opens. 2. To modify the overall policy action, click the Permit access to myapp or Deny access to myapp link that is shown, where myapp is the name of your cloud application, select an option in the Change Default Action dialog box, and click OK. 22 McAfee Cloud Identity Manager NetSuite Cloud Connector Guide

23 3.5.2 Configure policy rules and add them to the policy Each policy rule has an action and consists of an expression, which can be made up of sub expressions. 1. Click Add Rule, select an option in the Rule Action dialog box, and click OK. The new rule is added above the Add Rule button and shown with the selected permit or deny action. 2. Configure the new rule by clicking the following options. For more information about configuring expressions, see section Policy conditions and their Boolean expressions. Table 1. Option Policy Rule Configuration Options Description (Permit Deny) access to myapp Delete Rule AND OR +! Move Down Move Up Toggles the rule s action from permit to deny and deny to permit. Note: myapp is the name you assign to the Cloud Connector. Deletes the rule. Toggles the Boolean operators that specify whether the relationship among the expressions in the group at the current level of the rule have an AND relationship or an OR relationship. Note: All expressions at one level in the rule have the same Boolean relationship. Opens the Add Expression dialog box where you can configure an expression and add it to the rule. Note: Clicking the + sign above a group of expressions adds the expression to the bottom of the group. Clicking the + sign to the right side of an individual expression creates a sub group that consists of the selected expression and the new expression. Alternately adds the NOT operator to and removes the NOT operator from the group of expressions at the current level in the rule. Moves the rule down one position in the rule list in the configuration area. Note: This option is only visible when more than one rule is added to the policy. Moves the rule up one position in the rule list in the configuration area. Note: This option is only visible when more than one rule is added to the policy. 3. Click Next. The Review step opens. McAfee Cloud Identity Manager NetSuite Cloud Connector Guide 23

24 3.5.3 Policy conditions and their Boolean expressions When you configure an expression, you first select the expression type or condition. When the condition is met, the expression evaluates to TRUE. The conditions and their corresponding Boolean expressions are shown in the following table. Condition Access Time Day of Week Client IP Address Client Device Subject Attribute Match Advanced Expression Boolean Expression The time of access falls within the specified time range. The day of the week belongs to the specified set of days. The client IP address falls within the specified address range. The client device has one of the specified types. The user attribute value meets the specified match. The specified Boolean expression evaluates to TRUE Restrict access to the specified time range You can restrict when users are allowed to access your application to a specified time range. 1. Click + to open the Add Expression dialog box. 2. Select Access Time from the Expression Type drop-down list. 3. Select an operator from the Access Time drop-down list, and specify the required values: Between Select a starting and ending time for the time range from the From and To dropdown lists, respectively. Greater than Select a value from the Time drop-down list. Less than Select a value from the Time drop-down list. Greater than or equal to Select a value from the Time drop-down list. Less than or equal to Select a value from the Time drop-down list. 4. Click OK to close the dialog box and add the expression to the policy rule Restrict access to specified days of the week You can restrict when users are allowed to access your application to specified days of the week. 1. Click + to open the Add Expression dialog box. 2. Select Day of Week from the Expression Type drop-down list. 3. Select one or more of the checkboxes corresponding to the days of the week. 4. Click OK to close the dialog box and add the expression to the policy rule. 24 McAfee Cloud Identity Manager NetSuite Cloud Connector Guide

25 Restrict access to the specified range of client IP addresses You can restrict access to your application to users having an IP address in the specified range. 1. Click + to open the Add Expression dialog box. 2. Select Client IP from the Expression Type drop-down list. 3. Select an operator from the IP Address drop-down list, and specify the required values: Between Select a starting and ending IP address for the address range from the From and To drop-down lists, respectively. Equals Type a valid IP address in the IP field. Greater than Type a valid IP address in the IP field. Less than Type a valid IP address in the IP field. Greater than or equal to Type a valid IP address in the IP field. Less than or equal to Type a valid IP address in the IP field. Masked IP address Type values for the base IP address and the bit mask in the Base IP and Mask fields, respectively. 4. Click OK to close the dialog box and add the expression to the policy rule Restrict access to specified client devices You can restrict access to your application to users on a personal computer or a mobile device. 1. Click + to open the Add Expression dialog box. 2. Select Client Device from the Expression Type drop-down list. 3. Select one or both of the following checkboxes: PC Allows users on a personal computer to access your application. Mobile Allows users on a mobile device to access your application. 4. Click OK to close the dialog box and add the expression to the policy rule Restrict access to subjects having the specified attribute value You can restrict access to your application to subjects or users having a specified attribute value. To do so, you specify the subject type and the subject source. The subject type is the type of identity information. The subject source is a value that corresponds to the specified subject type. For example, if the subject type is an authentication result, the subject source is an attribute output by the Identity Connector. 1. Click + to open the Add Expression dialog box. 2. Select Subject Attribute Match Expression from the Expression Type drop-down list. 3. Select an option from the Subject Type drop-down list: CONSTANT Type a constant value in the Subject Source field. AUTHN_RESULT_FIELD Select a user attribute from the Subject Source drop-down list. EXPRESSION Type an expression in the Subject Source field. 4. Select an option from the Operator drop-down list, and specify the required values: Equals The user attribute value must equal the value you specify in the Value field. Contains The user attribute value must contain the value you specify in the Value field. Starts with The user attribute value must start with the value you specify in the Value field. Ends with The user attribute value must end with the value you specify in the Value field. Matches (regular expression) The user attribute value must equal the result of the regular expression you specify in the Regex field. In list The user attribute value must belong to the list of specified values. 5. Click OK to close the dialog box and add the expression to the policy rule. McAfee Cloud Identity Manager NetSuite Cloud Connector Guide 25

26 Restrict access based on the specified expression You can restrict access to your application based on whether the expression you specify evaluates to TRUE or FALSE. To build the expression, you select and combine components from the drop-down lists with text that you type in the expression editor. 1. Click + to open the Add Expression dialog box. 2. Select Advanced Expression from the Expression Type drop-down list. 3. Click Edit to open the Expression editor. 4. Select components from the following drop-down lists, and add them to the expression. Built-in Library Function Select the following built-in function: $AuthnResult.isIPInRange Tests whether the client computer s IP address falls within the specified range. Syntax: $AuthnResult.isIPInRange(low_IP,high_IP,target_IP) Parameters low_ip Specifies the beginning value of the IP address range. high_ip Specifies the ending value of the IP address range. target_ip Specifies the IP address of the client computer seeking access to the application. Return Value Returns one of the following values: TRUE The client IP address falls within the specified range. FALSE The client IP address does not fall within the specified range. Built-in Library Variable Select one of the following built-in variables: $IP Specifies the IP address of the client computer seeking access to the application. $UserAgent Specifies the web browser s user agent which provides information about whether the browser is running on a personal computer or mobile device. AuthnResult Select an attribute from the AuthnResult drop-down list. Example: mail Expression: $AuthnResult.getField("mail") Note: This attribute is an authentication result output by the Identity Connector or by the preceding authentication module in an authentication chain. Operator Select an operator from the Operator drop-down list. Example: contains Expression: $AuthnResult.getField("mail") contains Note: The available operators are: ==,!=, >, <, >=, <=, contains, &&,, or, ~=, +, -, *, %, /, and =. 5. Complete the expression by typing in the Expression editor field. Example: mcafee.com Expression: $AuthnResult.getField("mail") contains "mcafee.com" 26 McAfee Cloud Identity Manager NetSuite Cloud Connector Guide

27 6. Click OK to close the Expression editor. 7. Click OK to close the dialog box and add the expression to the policy rule Expression editor examples The following examples show how to build an expression using the expression editor. Expression editor: example 1 The expression in the following example retrieves the attribute corporation from the authentication results and compares its value to the empty string on the right side of the expression. If the expression evaluates to TRUE, the user is not part of any corporation. If the Rule Effect is set to Deny, the user is denied access to the SaaS or web application. To create this expression: 1. Select the attribute corporation from the AuthnResult drop-down list. 2. Select the operator == from the Operator drop-down list. 3. Type the double quotes in the Expression editor field. 4. Click OK. McAfee Cloud Identity Manager NetSuite Cloud Connector Guide 27

28 Expression editor: example 2 The expression in the following example uses the built-in library function $AuthnResult.isIPInRange and the built-in library variables: $IP and $UserAgent. The expression evaluates to TRUE if one or more of these conditions are met: The client computer IP address falls within the specified range. The client computer IP address equals the specified value. The web browser is running on an iphone. If the expression evaluates to TRUE and the Rule Effect is set to Permit, the user is granted access to the SaaS or web application. To create this expression: 1. Select $AuthnResult.isIPInRange from the Built-in Library Function drop-down list. 2. Type the low and high IP addresses that specify the range inside the first two pairs of quotes inside the parentheses. 3. Replace the third pair of quotes with the Built-in Library Variable $IP, which is the IP address of the client computer seeking access to the application. 4. Select the operator from the Operator drop-down list. 5. Select $IP from the Built-in Library Variable drop-down list. 6. Select the operator == from the Operator drop-down list. 7. Type an IP address enclosed in quotes in the Expression editor field. 8. Select the operator from the Operator drop-down list. 9. Select $UserAgent from the Built-in Library Variable drop-down list. 10. Select the operator contains from the Operator drop-down list. 11. Type iphone (including the quotes) in the Expression editor field. 12. Click OK. 28 McAfee Cloud Identity Manager NetSuite Cloud Connector Guide

29 3.6 Review the NetSuite Cloud Connector Configuration In the Review step of the Cloud Connector wizard, you can view the application type, application name, and Identity Connector. You can also test the configuration with the SSO test URL that is provided. The Alias is a short name that you can use in place of the longer SSO test URL. To accept and save the configuration, click Finish. McAfee Cloud Identity Manager NetSuite Cloud Connector Guide 29

30 30 McAfee Cloud Identity Manager NetSuite Cloud Connector Guide

31

32 Order Number: US [Revision A]

McAfee Cloud Identity Manager

McAfee Cloud Identity Manager SAML2 Cloud Connector Guide McAfee Cloud Identity Manager version 1.2 or later COPYRIGHT Copyright 2013 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed,

More information

McAfee Cloud Identity Manager

McAfee Cloud Identity Manager Salesforce Cloud Connector Guide McAfee Cloud Identity Manager version 1.1 or later COPYRIGHT Copyright 2013 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted,

More information

McAfee Cloud Identity Manager

McAfee Cloud Identity Manager Office 365 Cloud Connector Guide McAfee Cloud Identity Manager version 2.1 or later COPYRIGHT Copyright 2013 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted,

More information

McAfee Cloud Identity Manager

McAfee Cloud Identity Manager SharePoint Cloud Connector Guide McAfee Cloud Identity Manager version 2.0 or later COPYRIGHT Copyright 2013 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted,

More information

McAfee Email Gateway 7.x Encryption and IronPort Integration Guide

McAfee Email Gateway 7.x Encryption and IronPort Integration Guide Sample deployment architecture For this guide, we have provided a deployment architecture example. This example includes an IronPort Email Gateway sending outbound email, and the McAfee Email Gateway Encryption

More information

McAfee Host Data Loss Prevention 9.1 Cluster Installation Guide

McAfee Host Data Loss Prevention 9.1 Cluster Installation Guide McAfee Host Data Loss Prevention 9.1 Cluster Installation Guide COPYRIGHT Copyright 2011 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored

More information

McAfee epolicy Orchestrator 4.5 Cluster Installation Guide

McAfee epolicy Orchestrator 4.5 Cluster Installation Guide McAfee epolicy Orchestrator 4.5 Cluster Installation Guide COPYRIGHT Copyright 2009 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in

More information

McAfee Cloud Single Sign On

McAfee Cloud Single Sign On Setup Guide Revision B McAfee Cloud Single Sign On COPYRIGHT Copyright 2013 McAfee, Inc. Do not copy without permission. TRADEMARK ATTRIBUTIONS McAfee, the McAfee logo, McAfee Active Protection, McAfee

More information

Product Guide. McAfee Security-as-a-Service Partner SecurityDashboard 5.2.0

Product Guide. McAfee Security-as-a-Service Partner SecurityDashboard 5.2.0 Product Guide McAfee Security-as-a-Service Partner SecurityDashboard 5.2.0 COPYRIGHT Copyright 2010 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed,

More information

Application Note Configuring Department of Defense Common Access Card Authentication on McAfee. Firewall Enterprise

Application Note Configuring Department of Defense Common Access Card Authentication on McAfee. Firewall Enterprise Application Note Configuring Department of Defense Common Access Card Authentication on McAfee Firewall Enterprise McAfee Firewall Enterprise version 7.x and 8.x This application note describes how to

More information

Desktop Release Notes. Desktop Release Notes 5.2.1

Desktop Release Notes. Desktop Release Notes 5.2.1 Desktop Release Notes Desktop Release Notes 5.2.1 COPYRIGHT Copyright 2011 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval

More information

McAfee Optimized Virtual Environments - Antivirus for VDI. Installation Guide

McAfee Optimized Virtual Environments - Antivirus for VDI. Installation Guide McAfee Optimized Virtual Environments - Antivirus for VDI Installation Guide COPYRIGHT Copyright 2010-2011 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted,

More information

Release Notes for McAfee epolicy Orchestrator 4.5

Release Notes for McAfee epolicy Orchestrator 4.5 Release Notes for McAfee epolicy Orchestrator 4.5 About this document New features Known Issues Installation, upgrade, and migration considerations Considerations when uninstalling epolicy Orchestrator

More information

Application Note. Configuring McAfee Firewall Enterprise for McAfee Web Protection Service

Application Note. Configuring McAfee Firewall Enterprise for McAfee Web Protection Service Application Note Configuring McAfee Firewall Enterprise for McAfee Web Protection Service This document explains how to configure McAfee Firewall Enterprise (Sidewinder ) to redirect all web traffic to

More information

McAfee Endpoint Encryption for PC 7.0

McAfee Endpoint Encryption for PC 7.0 Migration Guide McAfee Endpoint Encryption for PC 7.0 For use with epolicy Orchestrator 4.6 Software COPYRIGHT Copyright 2012 McAfee, Inc. Do not copy without permission. TRADEMARK ATTRIBUTIONS McAfee,

More information

McAfee Optimized Virtual Environments for Servers. Installation Guide

McAfee Optimized Virtual Environments for Servers. Installation Guide McAfee Optimized Virtual Environments for Servers Installation Guide COPYRIGHT Copyright 2010 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed,

More information

Product Guide Revision A. McAfee Secure Web Mail Client 7.0.0 Software

Product Guide Revision A. McAfee Secure Web Mail Client 7.0.0 Software Product Guide Revision A McAfee Secure Web Mail Client 7.0.0 Software COPYRIGHT Copyright 2011 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed,

More information

McAfee VirusScan Enterprise for Linux 1.7.0 Software

McAfee VirusScan Enterprise for Linux 1.7.0 Software Configuration Guide McAfee VirusScan Enterprise for Linux 1.7.0 Software For use with epolicy Orchestrator 4.5.0 and 4.6.0 COPYRIGHT Copyright 2011 McAfee, Inc. All Rights Reserved. No part of this publication

More information

Setup Guide. Email Archiving for Microsoft Exchange Server 2003

Setup Guide. Email Archiving for Microsoft Exchange Server 2003 Setup Guide Email Archiving for Microsoft Exchange Server 2003 COPYRIGHT Copyright 2012 McAfee, Inc. Do not copy without permission. TRADEMARK ATTRIBUTIONS McAfee, the McAfee logo, McAfee Active Protection,

More information

McAfee Directory Services Connector extension

McAfee Directory Services Connector extension Getting Started Guide Revision A McAfee Directory Services Connector extension For use with epolicy Orchestrator 4.6.1 through 5.0 COPYRIGHT Copyright 2013 McAfee, Inc. Do not copy without permission.

More information

Product Guide Revision A. McAfee Secure Web Mail Client 7.0.0 Software

Product Guide Revision A. McAfee Secure Web Mail Client 7.0.0 Software Product Guide Revision A McAfee Secure Web Mail Client 7.0.0 Software COPYRIGHT Copyright 2011 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed,

More information

Installation Guide for PCs. McAfee All Access

Installation Guide for PCs. McAfee All Access Installation Guide for PCs McAfee All Access COPYRIGHT Copyright 2010 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system,

More information

McAfee Solidcore Change Reconciliation and Ticket-based Enforcement

McAfee Solidcore Change Reconciliation and Ticket-based Enforcement Change Reconciliation and Ticket-based Enforcement COPYRIGHT Copyright 2011 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval

More information

McAfee Total Protection Service Installation Guide

McAfee Total Protection Service Installation Guide McAfee Total Protection Service Installation Guide COPYRIGHT Copyright 2009 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval

More information

AVG Business SSO Partner Getting Started Guide

AVG Business SSO Partner Getting Started Guide AVG Business SSO Partner Getting Started Guide Table of Contents Overview... 2 Getting Started... 3 Web and OS requirements... 3 Supported web and device browsers... 3 Initial Login... 4 Navigation in

More information

Release Notes McAfee Risk Advisor 2.6.2 Software For use with epolicy Orchestrator 4.5.0 and 4.6.0 Software

Release Notes McAfee Risk Advisor 2.6.2 Software For use with epolicy Orchestrator 4.5.0 and 4.6.0 Software Release s McAfee Risk Advisor 2.6.2 Software For use with epolicy Orchestrator 4.5.0 and 4.6.0 Software About this document New features System Requirements Supported Upgrades Installing and verifying

More information

Setup Guide. Email Archiving for Microsoft Exchange Server 2010

Setup Guide. Email Archiving for Microsoft Exchange Server 2010 Setup Guide Email Archiving for Microsoft Exchange Server 2010 COPYRIGHT Copyright 2012 McAfee, Inc. Do not copy without permission. TRADEMARK ATTRIBUTIONS McAfee, the McAfee logo, McAfee Active Protection,

More information

McAfee Endpoint Security 10.0.0 Software

McAfee Endpoint Security 10.0.0 Software Installation Guide McAfee Endpoint Security 10.0.0 Software For use with epolicy Orchestrator 5.1.1 5.2.0 software and the McAfee SecurityCenter COPYRIGHT Copyright 2014 McAfee, Inc. Do not copy without

More information

epolicy Orchestrator Log Files

epolicy Orchestrator Log Files Reference Guide epolicy Orchestrator Log Files For use with epolicy Orchestrator 4.6.0 Software COPYRIGHT Copyright 2011 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced,

More information

For details about using automatic user provisioning with Salesforce, see Configuring user provisioning for Salesforce.

For details about using automatic user provisioning with Salesforce, see Configuring user provisioning for Salesforce. Chapter 41 Configuring Salesforce The following is an overview of how to configure the Salesforce.com application for singlesign on: 1 Prepare Salesforce for single sign-on: This involves the following:

More information

McAfee epolicy Orchestrator 4.5 Product Guide

McAfee epolicy Orchestrator 4.5 Product Guide McAfee epolicy Orchestrator 4.5 Product Guide COPYRIGHT Copyright 2009 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system,

More information

WatchDox Administrator's Guide. Application Version 3.7.5

WatchDox Administrator's Guide. Application Version 3.7.5 Application Version 3.7.5 Confidentiality This document contains confidential material that is proprietary WatchDox. The information and ideas herein may not be disclosed to any unauthorized individuals

More information

Configuring Salesforce

Configuring Salesforce Chapter 94 Configuring Salesforce The following is an overview of how to configure the Salesforce.com application for singlesign on: 1 Prepare Salesforce for single sign-on: This involves the following:

More information

Setup Guide. Email Archiving for Microsoft Exchange Server 2007

Setup Guide. Email Archiving for Microsoft Exchange Server 2007 Setup Guide Email Archiving for Microsoft Exchange Server 2007 COPYRIGHT Copyright 2012 McAfee, Inc. Do not copy without permission. TRADEMARK ATTRIBUTIONS McAfee, the McAfee logo, McAfee Active Protection,

More information

Sophos Mobile Control Installation guide

Sophos Mobile Control Installation guide Sophos Mobile Control Installation guide Product version: 2.5 Document date: July 2012 Contents 1 Introduction... 3 2 The Sophos Mobile Control server... 4 3 Set up Sophos Mobile Control... 13 4 Running

More information

Recommended Recommended for all environments. Apply this update at the earliest convenience.

Recommended Recommended for all environments. Apply this update at the earliest convenience. Release Notes McAfee Enterprise Mobility Management 11.0 Patch 4 About this document About this release Bug fixes and enhancement Installation instructions Files affected by patch Troubleshooting installation

More information

Implementing McAfee Device Control Security

Implementing McAfee Device Control Security Implementing McAfee Device Control Security COPYRIGHT Copyright 2009 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system,

More information

Installation Guide. McAfee SaaS Endpoint Protection 5.2.0

Installation Guide. McAfee SaaS Endpoint Protection 5.2.0 Installation Guide McAfee SaaS Endpoint Protection 5.2.0 COPYRIGHT Copyright 2010 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a

More information

VMware Identity Manager Administration

VMware Identity Manager Administration VMware Identity Manager Administration VMware Identity Manager 2.4 This document supports the version of each product listed and supports all subsequent versions until the document is replaced by a new

More information

Data Center Connector 3.0.0 for OpenStack

Data Center Connector 3.0.0 for OpenStack Product Guide Data Center Connector 3.0.0 for OpenStack For use with epolicy Orchestrator 5.1.0 Software COPYRIGHT Copyright 2014 McAfee, Inc. Do not copy without permission. TRADEMARK ATTRIBUTIONS McAfee,

More information

CA Nimsoft Service Desk

CA Nimsoft Service Desk CA Nimsoft Service Desk Single Sign-On Configuration Guide 6.2.6 This Documentation, which includes embedded help systems and electronically distributed materials, (hereinafter referred to as the Documentation

More information

Sophos Mobile Control Startup guide. Product version: 3.5

Sophos Mobile Control Startup guide. Product version: 3.5 Sophos Mobile Control Startup guide Product version: 3.5 Document date: July 2013 Contents 1 About this guide...3 2 What are the key steps?...5 3 Log in as a super administrator...6 4 Activate Sophos Mobile

More information

Product Guide Revision A. McAfee Cloud Single Sign On 4.0.1

Product Guide Revision A. McAfee Cloud Single Sign On 4.0.1 Product Guide Revision A McAfee Cloud Single Sign On 4.0.1 COPYRIGHT Copyright 2013 McAfee, Inc. Do not copy without permission. TRADEMARK ATTRIBUTIONS McAfee, the McAfee logo, McAfee Active Protection,

More information

Setup Guide Revision B. McAfee SaaS Email Archiving for Microsoft Exchange Server 2010

Setup Guide Revision B. McAfee SaaS Email Archiving for Microsoft Exchange Server 2010 Setup Guide Revision B McAfee SaaS Email Archiving for Microsoft Exchange Server 2010 COPYRIGHT Copyright 2015 McAfee, Inc., 2821 Mission College Boulevard, Santa Clara, CA 95054, 1.888.847.8766, www.intelsecurity.com

More information

SAP NetWeaver AS Java

SAP NetWeaver AS Java Chapter 75 Configuring SAP NetWeaver AS Java SAP NetWeaver Application Server ("AS") Java (Stack) is one of the two installation options of SAP NetWeaver AS. The other option is the ABAP Stack, which is

More information

Administration Guide Revision E. Account Management. For SaaS Email and Web Security

Administration Guide Revision E. Account Management. For SaaS Email and Web Security Administration Guide Revision E Account Management COPYRIGHT Copyright 2015 McAfee, Inc., 2821 Mission College Boulevard, Santa Clara, CA 95054, 1.888.847.8766, www.intelsecurity.com TRADEMARK ATTRIBUTIONS

More information

McAfee Public Cloud Server Security Suite

McAfee Public Cloud Server Security Suite Installation Guide McAfee Public Cloud Server Security Suite For use with McAfee epolicy Orchestrator COPYRIGHT Copyright 2015 McAfee, Inc., 2821 Mission College Boulevard, Santa Clara, CA 95054, 1.888.847.8766,

More information

Connected Data. Connected Data requirements for SSO

Connected Data. Connected Data requirements for SSO Chapter 40 Configuring Connected Data The following is an overview of the steps required to configure the Connected Data Web application for single sign-on (SSO) via SAML. Connected Data offers both IdP-initiated

More information

McAfee Asset Manager Console

McAfee Asset Manager Console Installation Guide McAfee Asset Manager Console Version 6.5 COPYRIGHT Copyright 2012 McAfee, Inc. Do not copy without permission. TRADEMARK ATTRIBUTIONS McAfee, the McAfee logo, McAfee Active Protection,

More information

Configuring. SuccessFactors. Chapter 67

Configuring. SuccessFactors. Chapter 67 Chapter 67 Configuring SuccessFactors The following is an overview of the steps required to configure the SuccessFactors Enterprise Edition Web application for single sign-on (SSO) via SAML. SuccessFactors

More information

BarTender Print Portal. Web-based Software for Printing BarTender Documents WHITE PAPER

BarTender Print Portal. Web-based Software for Printing BarTender Documents WHITE PAPER BarTender Print Portal Web-based Software for Printing BarTender Documents WHITE PAPER Contents Overview 3 Installing Print Portal 4 Configuring Your Installation 4 Supported Printing Technologies 5 Web

More information

Configuring SuccessFactors

Configuring SuccessFactors Chapter 117 Configuring SuccessFactors The following is an overview of the steps required to configure the SuccessFactors Enterprise Edition Web application for single sign-on (SSO) via SAML. SuccessFactors

More information

Upgrade Guide. McAfee Vulnerability Manager Microsoft Windows Server 2008 R2

Upgrade Guide. McAfee Vulnerability Manager Microsoft Windows Server 2008 R2 Upgrade Guide McAfee Vulnerability Manager Microsoft Windows Server 2008 R2 COPYRIGHT Copyright 2012 McAfee, Inc. Do not copy without permission. TRADEMARKS McAfee, the McAfee logo, McAfee Active Protection,

More information

Data Center Connector for vsphere 3.0.0

Data Center Connector for vsphere 3.0.0 Product Guide Data Center Connector for vsphere 3.0.0 For use with epolicy Orchestrator 4.6.0, 5.0.0 Software COPYRIGHT Copyright 2013 McAfee, Inc. Do not copy without permission. TRADEMARK ATTRIBUTIONS

More information

HOTPin Integration Guide: Salesforce SSO with Active Directory Federated Services

HOTPin Integration Guide: Salesforce SSO with Active Directory Federated Services 1 HOTPin Integration Guide: Salesforce SSO with Active Directory Federated Services Disclaimer Disclaimer of Warranties and Limitation of Liabilities All information contained in this document is provided

More information

McAfee Solidcore 5.1.0 Product Guide

McAfee Solidcore 5.1.0 Product Guide McAfee Solidcore 5.1.0 Product Guide COPYRIGHT Copyright 2010 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or

More information

McAfee Security 1.0 User Guide

McAfee Security 1.0 User Guide McAfee Security 1.0 User Guide COPYRIGHT Copyright 2009 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated

More information

SAML single sign-on configuration overview

SAML single sign-on configuration overview Chapter 34 Configurin guring g Clarizen Configure the Clarizen Web-SAML application profile in Cloud Manager to set up single sign-on via SAML with Clarizen. Configuration also specifies how the application

More information

SAP NetWeaver Fiori. For more information, see "Creating and enabling a trusted provider for Centrify" on page 108-10.

SAP NetWeaver Fiori. For more information, see Creating and enabling a trusted provider for Centrify on page 108-10. Chapter 108 Configuring SAP NetWeaver Fiori The following is an overview of the steps required to configure the SAP NetWeaver Fiori Web application for single sign-on (SSO) via SAML. SAP NetWeaver Fiori

More information

Installation and Configuration Guide

Installation and Configuration Guide Installation and Configuration Guide BlackBerry Resource Kit for BlackBerry Enterprise Service 10 Version 10.2 Published: 2015-11-12 SWD-20151112124827386 Contents Overview: BlackBerry Enterprise Service

More information

SP-initiated SSO for Smartsheet is automatically enabled when the SAML feature is activated.

SP-initiated SSO for Smartsheet is automatically enabled when the SAML feature is activated. Chapter 87 Configuring Smartsheet The following is an overview of the steps required to configure the Smartsheet Web application for single sign-on (SSO) via SAML. Smartsheet offers both IdP-initiated

More information

Sophos Mobile Control Startup guide. Product version: 3

Sophos Mobile Control Startup guide. Product version: 3 Sophos Mobile Control Startup guide Product version: 3 Document date: January 2013 Contents 1 About this guide...3 2 What are the key steps?...5 3 Log in as a super administrator...6 4 Activate Sophos

More information

McAfee Agent Handler

McAfee Agent Handler McAfee Agent Handler COPYRIGHT Copyright 2009 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into

More information

Administration Guide. WatchDox Server. Version 4.8.0

Administration Guide. WatchDox Server. Version 4.8.0 Administration Guide WatchDox Server Version 4.8.0 Published: 2015-11-01 SWD-20151101091846278 Contents Introduction... 7 Getting started... 11 Signing in to WatchDox... 11 Signing in with username and

More information

McAfee Host Data Loss Prevention Best Practices: Protecting against data loss from external devices

McAfee Host Data Loss Prevention Best Practices: Protecting against data loss from external devices McAfee Host Data Loss Prevention Best Practices: Protecting against data loss from external devices COPYRIGHT Copyright 2009 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced,

More information

Configuration Guide. BES12 Cloud

Configuration Guide. BES12 Cloud Configuration Guide BES12 Cloud Published: 2016-04-08 SWD-20160408113328879 Contents About this guide... 6 Getting started... 7 Configuring BES12 for the first time...7 Administrator permissions you need

More information

McAfee Enterprise Mobility Management 11.0 Software

McAfee Enterprise Mobility Management 11.0 Software Product Guide McAfee Enterprise Mobility Management 11.0 Software For use with epolicy Orchestrator 4.6.5-5.0 Software COPYRIGHT Copyright 2013 McAfee, Inc. Do not copy without permission. TRADEMARK ATTRIBUTIONS

More information

Configuring. SugarCRM. Chapter 121

Configuring. SugarCRM. Chapter 121 Chapter 121 Configuring SugarCRM The following is an overview of the steps required to configure the SugarCRM Web application for single sign-on (SSO) via SAML. SugarCRM offers both IdP-initiated SAML

More information

Installation Guide. McAfee Security for Microsoft Exchange 7.6.0 Software

Installation Guide. McAfee Security for Microsoft Exchange 7.6.0 Software Installation Guide McAfee Security for Microsoft Exchange 7.6.0 Software COPYRIGHT Copyright 2011 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed,

More information

ADFS Integration Guidelines

ADFS Integration Guidelines ADFS Integration Guidelines Version 1.6 updated March 13 th 2014 Table of contents About This Guide 3 Requirements 3 Part 1 Configure Marcombox in the ADFS Environment 4 Part 2 Add Relying Party in ADFS

More information

McAfee GTI Proxy 1.0.0 Administration Guide

McAfee GTI Proxy 1.0.0 Administration Guide McAfee GTI Proxy 1.0.0 Administration Guide COPYRIGHT Copyright 2010 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored in a retrieval system,

More information

Installation Guide. McAfee SaaS Endpoint Protection

Installation Guide. McAfee SaaS Endpoint Protection Installation Guide McAfee SaaS Endpoint Protection COPYRIGHT Copyright 2012 McAfee, Inc. Do not copy without permission. TRADEMARK ATTRIBUTIONS McAfee, the McAfee logo, McAfee Active Protection, McAfee

More information

INTEGRATION GUIDE. DIGIPASS Authentication for VMware Horizon Workspace

INTEGRATION GUIDE. DIGIPASS Authentication for VMware Horizon Workspace INTEGRATION GUIDE DIGIPASS Authentication for VMware Horizon Workspace Disclaimer Disclaimer of Warranties and Limitation of Liabilities All information contained in this document is provided 'as is';

More information

McAfee Risk Advisor 2.7

McAfee Risk Advisor 2.7 Getting Started Guide McAfee Risk Advisor 2.7 For use with epolicy Orchestrator 4.5 and 4.6 1 McAfee Risk Advisor 2.7 Getting Started Guide About this guide COPYRIGHT Copyright 2012 McAfee, Inc. All Rights

More information

Sophos Mobile Control Installation guide. Product version: 3.5

Sophos Mobile Control Installation guide. Product version: 3.5 Sophos Mobile Control Installation guide Product version: 3.5 Document date: July 2013 Contents 1 Introduction...3 2 The Sophos Mobile Control server...4 3 Set up Sophos Mobile Control...10 4 External

More information

Sophos Mobile Control Installation guide. Product version: 3

Sophos Mobile Control Installation guide. Product version: 3 Sophos Mobile Control Installation guide Product version: 3 Document date: January 2013 Contents 1 Introduction...3 2 The Sophos Mobile Control server...4 3 Set up Sophos Mobile Control...16 4 External

More information

Cloud Authentication. Getting Started Guide. Version 2.1.0.06

Cloud Authentication. Getting Started Guide. Version 2.1.0.06 Cloud Authentication Getting Started Guide Version 2.1.0.06 ii Copyright 2011 SafeNet, Inc. All rights reserved. All attempts have been made to make the information in this document complete and accurate.

More information

VPN Web Portal Usage Guide

VPN Web Portal Usage Guide VPN Web Portal Usage Guide Table of Contents WHAT IS VPN WEB CLIENT 4 SUPPORTED WEB BROWSERS 4 LOGGING INTO VPN WEB CLIENT 5 ESTABLISHING A VPN CONNECTION 6 KNOWN ISSUES WITH MAC COMPUTERS 6 ACCESS INTRANET

More information

NETWRIX EVENT LOG MANAGER

NETWRIX EVENT LOG MANAGER NETWRIX EVENT LOG MANAGER ADMINISTRATOR S GUIDE Product Version: 4.0 July/2012. Legal Notice The information in this publication is furnished for information use only, and does not constitute a commitment

More information

Installation Guide. McAfee epolicy Orchestrator 4.6.0 Software

Installation Guide. McAfee epolicy Orchestrator 4.6.0 Software Installation Guide McAfee epolicy Orchestrator 4.6.0 Software COPYRIGHT Copyright 2011 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed, stored

More information

Defender 5.7 - Token Deployment System Quick Start Guide

Defender 5.7 - Token Deployment System Quick Start Guide Defender 5.7 - Token Deployment System Quick Start Guide This guide describes how to install, configure and use the Defender Token Deployment System, based on default settings and how to self register

More information

Hardware Sizing and Bandwidth Usage Guide. McAfee epolicy Orchestrator 4.6.0 Software

Hardware Sizing and Bandwidth Usage Guide. McAfee epolicy Orchestrator 4.6.0 Software Hardware Sizing and Bandwidth Usage Guide McAfee epolicy Orchestrator 4.6.0 Software COPYRIGHT Copyright 2011 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted,

More information

Installation Guide. McAfee SaaS Endpoint Protection 6.0

Installation Guide. McAfee SaaS Endpoint Protection 6.0 Installation Guide McAfee SaaS Endpoint Protection 6.0 COPYRIGHT Copyright 2012 McAfee, Inc. Do not copy without permission. TRADEMARK ATTRIBUTIONS McAfee, the McAfee logo, McAfee Active Protection, McAfee

More information

Sophos Mobile Control SaaS startup guide. Product version: 6

Sophos Mobile Control SaaS startup guide. Product version: 6 Sophos Mobile Control SaaS startup guide Product version: 6 Document date: January 2016 Contents 1 About this guide...4 2 About Sophos Mobile Control...5 3 What are the key steps?...7 4 Change your password...8

More information

Host Access Management and Security Server

Host Access Management and Security Server Host Access Management and Security Server Evaluation Guide Host Access Management and Security Server Evaluation Guide 12.2 Copyrights and Notices Copyright 2015 Attachmate Corporation. All rights reserved.

More information

Product Guide. McAfee SaaS Endpoint Protection (October, 2012 release)

Product Guide. McAfee SaaS Endpoint Protection (October, 2012 release) Product Guide McAfee SaaS Endpoint Protection (October, 2012 release) COPYRIGHT Copyright 2012 McAfee, Inc. Do not copy without permission. TRADEMARK ATTRIBUTIONS McAfee, the McAfee logo, McAfee Active

More information

Dell One Identity Cloud Access Manager 8.0.1 - How to Configure for SSO to SAP NetWeaver using SAML 2.0

Dell One Identity Cloud Access Manager 8.0.1 - How to Configure for SSO to SAP NetWeaver using SAML 2.0 Dell One Identity Cloud Access Manager 8.0.1 - How to Configure for SSO to SAP NetWeaver using SAML 2.0 May 2015 About this guide Prerequisites and requirements NetWeaver configuration Legal notices About

More information

App Orchestration 2.0

App Orchestration 2.0 App Orchestration 2.0 Configuring NetScaler Load Balancing and NetScaler Gateway for App Orchestration Prepared by: Christian Paez Version: 1.0 Last Updated: December 13, 2013 2013 Citrix Systems, Inc.

More information

Entrust Managed Services PKI. Configuring secure LDAP with Domain Controller digital certificates

Entrust Managed Services PKI. Configuring secure LDAP with Domain Controller digital certificates Entrust Managed Services Entrust Managed Services PKI Configuring secure LDAP with Domain Controller digital certificates Document issue: 1.0 Date of issue: October 2009 Copyright 2009 Entrust. All rights

More information

Quick Start Guide. McAfee Product Improvement Program 1.1.0

Quick Start Guide. McAfee Product Improvement Program 1.1.0 Quick Start Guide McAfee Product Improvement Program 1.1.0 COPYRIGHT Copyright 2013 McAfee, Inc. Do not copy without permission. TRADEMARK ATTRIBUTIONS McAfee, the McAfee logo, McAfee Active Protection,

More information

HOTPin Integration Guide: Google Apps with Active Directory Federated Services

HOTPin Integration Guide: Google Apps with Active Directory Federated Services HOTPin Integration Guide: Google Apps with Active Directory Federated Services Disclaimer Disclaimer of Warranties and Limitation of Liabilities All information contained in this document is provided 'as

More information

Centrify Cloud Management Suite

Centrify Cloud Management Suite Centrify Cloud Management Suite Installation and Configuration Guide April 2013 Centrify Corporation Legal notice This document and the software described in this document are furnished under and are subject

More information

McAfee SaaS Email Archiving

McAfee SaaS Email Archiving User Guide McAfee SaaS Email Archiving COPYRIGHT Copyright 2013 McAfee, Inc. Do not copy without permission. TRADEMARK ATTRIBUTIONS McAfee, the McAfee logo, McAfee Active Protection, McAfee AppPrism, McAfee

More information

Sophos Mobile Control Installation guide. Product version: 3.6

Sophos Mobile Control Installation guide. Product version: 3.6 Sophos Mobile Control Installation guide Product version: 3.6 Document date: November 2013 Contents 1 Introduction...3 2 The Sophos Mobile Control server...5 3 Set up Sophos Mobile Control...11 4 External

More information

Managing users. Account sources. Chapter 1

Managing users. Account sources. Chapter 1 Chapter 1 Managing users The Users page in Cloud Manager lists all of the user accounts in the Centrify identity platform. This includes all of the users you create in the Centrify for Mobile user service

More information

Perceptive Intelligent Capture Solution Configration Manager

Perceptive Intelligent Capture Solution Configration Manager Perceptive Intelligent Capture Solution Configration Manager Installation and Setup Guide Version: 1.0.x Written by: Product Knowledge, R&D Date: February 2016 2015 Lexmark International Technology, S.A.

More information

McAfee SaaS Archiving

McAfee SaaS  Archiving Administration Guide McAfee SaaS Email Archiving COPYRIGHT Copyright 2013 McAfee, Inc. Do not copy without permission. TRADEMARK ATTRIBUTIONS McAfee, the McAfee logo, McAfee Active Protection, McAfee AppPrism,

More information

Tenrox. Single Sign-On (SSO) Setup Guide. January, 2012. 2012 Tenrox. All rights reserved.

Tenrox. Single Sign-On (SSO) Setup Guide. January, 2012. 2012 Tenrox. All rights reserved. Tenrox Single Sign-On (SSO) Setup Guide January, 2012 2012 Tenrox. All rights reserved. About this Guide This guide provides a high-level technical overview of the Tenrox Single Sign-On (SSO) architecture,

More information

Total Protection Service

Total Protection Service User Guide McAfee Total Protection Service for Microsoft Windows Home Server COPYRIGHT Copyright 2008 McAfee, Inc. All Rights Reserved. No part of this publication may be reproduced, transmitted, transcribed,

More information

Sophos Mobile Control as a Service Startup guide. Product version: 3.5

Sophos Mobile Control as a Service Startup guide. Product version: 3.5 Sophos Mobile Control as a Service Startup guide Product version: 3.5 Document date: August 2013 Contents 1 About this guide...3 2 What are the key steps?...4 3 First login...5 4 Change your administrator

More information