ECP & ECP240-32EX

Save this PDF as:
 WORD  PNG  TXT  JPG

Size: px
Start display at page:

Download "ECP240-32 & ECP240-32EX"

Transcription

1 ECP & ECP240-32EX Hardware Manual 11Fl., 684-2, Deungchon 3-Dong, Gangseo-Gu, Seoul, Korea TEL: FAX:

2 Contents 1. PRODUCT OVERVIEW INTRODUCTION TO ECP EQUIPMENT SPECIFICATION FUNCTIONS OF MAJOR CONNECTORS Major connectors Details of major connectors DVI & 16BNC/2RCA Cable Additional power connection for ECP240-32EX EQUIPMENT FUNCTIONS VIDEO AUDIO DISPLAY ON EXTERNAL MONITOR WATCHDOG FUNCTION AND CONNECTION CONNECTION WITH PERIPHERAL EQUIPMENT FPGA FIRMWARE UPDATING ELECTRICAL CHARACTERISTICS RECOMMENDED OPERATING CONDITIONS POWER CONSUMPTION UDP Co., Ltd. ii

3 1. Product Overview All statements in this manual apply to both ECP and ECP240-32EX, NOTE unless otherwise noted, 1.1 Introduction to ECP The ECP is a video capture card for system PC-based DVR and supports 16- channels audio capture, digital input, digital output, and watchdog function as well as 32 -channels video capture. 1.2 Equipment specification Video capture : 32 channels at 200 / 240 (PAL / NTSC) frames/sec. Audio capture : 16 channels Video Resolution : Max. 720x576 / 720x480 (PAL / NTSC) Watchdog function Sensor/Alarm (Max. 16 channels sensor / 16 channels alarm) External monitor display (supporting up to 3 external monitors with spot) SDK (software development kit) Supports Windows 2000/XP A UDP Co., Ltd. 1

4 1.3 Functions of major connectors Major connectors Figure 1. Major Connectors of ECP Details of major connectors (1) 3-pin Jumper for restoring FPGA firmware (JP1) 3-pin Jumper is used when restoring broken FPGA firmware. The jumper pins is connected to NO/UP upon delivery from the factory. Note! The Jumper Cap should be connected to either NO/UP or RE pins; otherwise the ECP card cannot be recognized in the SYSTEM. Any one of the NO/UP or RE pins must be connected with the Jumper Cap. Figure 2. 3-pin Jumper for restoring FPGA firmware NO/UP (Normal/Update): position of the Jumper Cap at normal operation RE (Restore): position of the Jumper Cap when restoring broken FPGA firmware Care should be taken when executing work related with the FPGA firmware. The FPGA firmware update method must be read before starting the work. A UDP Co., Ltd. 2

5 (2) DVI Connector for video input (U37, U38) A DVI supports for 16 video input. There are 2 DVI Connector for 32 video inputs. Low one (U37) is for Video Channel 1 ~ 16 and upper one (U38) is for video channel 17 ~ 32. Figure 3. DVI Connectors (3) 12-pin Connector for analog cascade Not used. (4) 40-pin Box Connector for video input (J8, J9) There are two 40-pin Box Connectors for video signal. Functionally, it works the same way as the DVI Connectors U37 and U38, but it is operated differently. 1 When using as the video input : The cameras shall be connected to the back panel of the video input connector. The back panel and capture card are connected by 40-pin flat cable. The analog video signal is put into the capture card through the back panel and 40-pin flat cable. Caution! At this time, be careful not to connect the camera to the DVI Connectors U37 or U38. 2 When transferring a video signal to another extension card (ex.:ovr3500): Connect camera to DVI Connector of capture card using DVI & 16BNC/2RCA Cable. The 40-pin Box Connectors of the OVR3500 and the 40-pin Box Connectors of the ECP are connected by 40-pin flat cables. Be sure to connect the cable correctly using a connector with a protrusion. A UDP Co., Ltd. 3

6 Figure pin Box Connector for Video input When connecting with another card, 1:1 40-pin flat cable as shown in Figure 5 shall be used. 40Pin Connector to be Connected to ECPR480 Card 40Pin Flat Cable to be Connected to Back Panel for Video Input or Other Cards such as OVR3500 Figure 5. 1:1 40-pin flat cable (5) 2-pin Connector for watchdog (J5, J6) To connect the watchdog cable, the 2-pin cable is required. One is supplied with the capture card and the other is replaced by the existing reset cable enclosed in the case of the system. Firstly, the cable in the reset terminal of the system case is connected to the 2-pin Connector (J5) of the watchdog. The other cable is to be connected to the 2-pin Connector (J6) of the watchdog and the reset terminal of the motherboard. The watchdog pin header has no polarity or direction. Therefore, the cable may be plugged in the reverse direction or the connection of J5 and J6 may be interchanged. Detailed functions of the watchdog will be explained in Chapter 2.4 Watchdog functions and connection. J5 J6 Figure 6. the cross section of 2-pin connector (6) 20-pin Box Connector (J9) for connecting ConExt extension card This connector is used to connect with the ConExt extension cards. The 20-pin flat cable is used for the connection. The ConExt extension cards are not A UDP Co., Ltd. 4

7 supplied as a basic accessory. Details will be explained in the extension card hardware manual separately supplied. (7) 12-pin Connector for Digital Cascade Not used. (8) 4-pin Connector for I 2 C Not used. (9) 5-pin Connector for Audio input (J1 ~ J4) Each 5-pin Connector provides 4 audio channels. The ECP is equipped with four 5-pin Connector therefore it supports 16 audio channels. Figure 7. 5-pin Connector for Audio input DVI & 16BNC/2RCA Cable This cable is used for ECP / ECP240-32EX. It has 16BNC Connectors for Video input and 2RCA Connectors for external monitors. Figure 8. DVI & 16BNC/2RCA Cable A UDP Co., Ltd. 5

8 1.3.4 Additional power connection for ECP240-32EX ECP240-32EX (PCI Express version of ECP240-32) requires an additional power connection, which means you should connect power cable from a power supply to ECP240-32EX as the following Figure 9. Because it is that PCI Express does not supply 5V power from a slot. Figure 9. How to connect an additional power connection with ECP240-32EX NOTE BIOS does not recognize ECP240-32EX, if the additional power connection is not connected. A UDP Co., Ltd. 6

9 2. Equipment Functions 2.1 Video - Video input Channels : 32 Input : color camera (PAL / NTSC), black & white camera Connection : 2 sets of DVI & 16BNC/2RCA Cable or 40-pin flat cable (for Connecting with video input back panel) Recommended signal range : 0.7V ~ 1.5V (p-p) 2.2 Audio - Audio input Channels : 16 Input type : Microphone, line in (mono) Recommended signal range : 0.01V ~ 3.3V (p-p) - Audio sampling quality Bit number per sample : 8 bit or 16 bit Sampling frequency : 4 KHz, 8 KHz, 16 KHz, 32 khz 2.3 Display on external monitor Channels : 3 channels (supporting 3 spot outputs) Connection : 2 DVI & 16BNC/2RCA Cables or 2-pin Connector (only used with back panel) 2.4 Watchdog function and connection When a system halts unexpectedly, watchdog resets the system automatically. Watchdog ECP System Reset Button Motherboard Figure Watchdog Function Schematic Operation Principle A UDP Co., Ltd. 7

10 When the internal watchdog counter counts down to zero, an alarm is sounded and the system is reset. The DVR system sets the watchdog timer periodically to prevent the watchdog function for resetting the system. When the system malfunctions, the DVR system is prevented to set the watchdog timer and a system reset results. Pressing the system reset button manually has the same effect as a system reset initiated by the watchdog function. Alarm To prevent system abruptly resets without any prior notification, the DVR system administrator can setup the system to sound an alarm for a predetermined period before a system reset occurs. Watchdog function does not start automatically when the system is turned on. It is enabled only when the DVR system is setup to use the watchdog function. Watchdog does not recognize manual system resets. If the system is reset manually while the watchdog is enabled, the watchdog function may reset the system again before system booting for the manual reset is completed. The watchdog initially remains at function stop state and was designed to reset without sounding a buzzer. To sound the buzzer prior to watchdog resetting, it is required to make the software control the watchdog and set the time of sounding the buzzer. The watchdog function in the software stops when the system is newly booted or reset by the watchdog so it is necessary to set the watchdog function every time. Two sets of 2-pin cable are is required to connect the watchdog cable. One is supplied with the capture card and the other is replaced by the existing reset cable enclosed in the case of the system. Firstly, the cable in the reset terminal button of the system case shall beis connected to the J5 2-pin Connector of the watchdog. Motherboard restart connector and 2-pin Connector (J6) are connected using 2-pin cable. The 2-pin Connector has no polarity or direction. As such, the cable may be plugged in the reverse direction or the connection of J5 and J6 may be interchanged. Figure 11 depicts the example of watchdog cable connection. A UDP Co., Ltd. 8

11 Figure 11. Watchdog cable connection diagram A UDP Co., Ltd. 9

12 2.5 Connection with peripheral equipment Figure 12. ECP and connection with peripheral equipment 2.6 FPGA firmware updating The firmware can be modified in order to upgrade the performance and improve the stability of the ECP When newly delivered from the factory, most up-to-date firmware is installed. The existing firmware can be updated to a newer one or can be restored if damaged. Update to a new firmware The Jumper Cap should not be moved. The Jumper Cap is plugged in the NO/UP position. The ECP driver can be utilized as the device driver A UDP Co., Ltd. 10

13 Execute the FPGA firmware update program separately supplied. Proceed with the updating in accordance with the indication of the update program. Reboot the system. The ECP will not be operated by the new firmware unless the system is rebooted. Caution! Stop all other application programs except the update program in order to ensure stable updating of the program. If the updating is not succeeded or if the firmware seems to be damaged, restoration can be executed by the following methods. Restoring broken firmware 1 Turn off the power to the system. 2 Remove the ECP card from the system. 3 Move the jumper wire from the FPGA firmware restoring pin header JP2 to RE. 4 Insert the ECP card into the system and turn on the power to the system. The ECP card will restore automatically into the most stable firmware. While the restoring process is ongoing, the user can proceed to the next steps. 5 Once the windows are successfully booted, execute the firmware update program and according to the indication of the program, update the firmware. 6 If the update is successfully completed, be sure to shutdown system, without rebooting. 7 After checking that the power to the system is off, remove the ECP card. Move the jumper wire from the FPGA firmware restoring pin header to NO/UP position. 8 Install the ECP card into the system. Firmware restoration is now completed. Caution! When moving the 3-pin Jumper cap, be sure to remove the ECP card from the SYSTEM prior to initialize the work. Caution! Stop all the other application programs except the update program in order to ensure stable updating of the program. Normally, the updating process will not fail, however, if failed, apply the Restoring broken firmware process for firmware restoration. A UDP Co., Ltd. 11

14 3. Electrical characteristics 3.1 Recommended operating conditions Parameter Min Type Max Units Power supply +3.3V V Power supply +5V V Peak to peak amplitude V Video input range Sync amplitude mv % of Horizontal lock - - ±7 Line range Length Color sub-carrier lock-in range - - ±800 Hz Audio input range V P-P Ambient operating temperature 0 65 C Ambient operating humidity 0 90 % 3.2 Power consumption Parameter Max Units Power supply +3.3V Power supply +5V 1160 ma 275 ma A UDP Co., Ltd. 12

15 Revision history Rev. Date History A Created. A UDP Co., Ltd. 13

HP4000EX Hardware Manual

HP4000EX Hardware Manual INFORMATION TO USER CAUTION RISK OF ELECTRIC SHOCK, DO NOT OPEN! CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED

More information

KS732 Family. Rev. 1.01 KS732. 1/3 CCD Color USB Camera

KS732 Family. Rev. 1.01 KS732. 1/3 CCD Color USB Camera KS732 Family 1/3 CCD Color USB Camera The KS732 is a product line of 1/3" compact cameras which is available as an USB version. It is designed to be used in a wide variety of professional industrial, security

More information

Chapter 1 Video Capture Cards

Chapter 1 Video Capture Cards Chapter 1 Video Capture Cards This chapter includes the following information: Minimum system requirements Packing list Connection diagrams Specifications Driver installation Comparison chart 1.1 GV-1120,

More information

MISE - STEREO ENCODER

MISE - STEREO ENCODER MISE - STEREO ENCODER 1. FRONT PANEL CONTROLS and INDICATORS AUDIO LEVEL F1 F2 F3 F4 OVER- MOD F5 F1:AUDIO LEVEL Control The setting of this screwdriver adjustment determines the audio input signal level.

More information

2005-5 Edition. Copyright 2005 by X-Vision

2005-5 Edition. Copyright 2005 by X-Vision Digital Video Recorder TECHNICAL MANUAL 2005-5 Edition Copyright 2005 by 2 Chapter 1 Setup Introduction 3 1.1 System Specification Recommendation The below is the recommended computer specification to

More information

GV-600B, GV-650B, GV-800B

GV-600B, GV-650B, GV-800B GV-600B, GV-650B, GV-800B There are two types of GV-600B / GV-650B / GV-800B Card: PCI and PCI-E. Both types of the GV-600B / GV-650B / GV-800B Card provide up to 16 video channels and 4 audio channels.

More information

Internet Video Server

Internet Video Server Internet Video Server IVS-H125 / IVS-H125P Quick Installation Guide Table of Contents Chapter 1. Introduction... 3 1.1 Before Installation... 3 1.2 System Requirements... 3 Chapter 2. Physical Description

More information

Windows XP Manual Installation

Windows XP Manual Installation Windows XP Manual Installation Installation of the drivers for your video card can be fairly easy if the following steps are followed carefully. There are a few things to keep in mind before proceeding

More information

User and installation manual

User and installation manual User and installation manual aquaero 5 The information contained in this manual is subject to change without prior notice. All rights reserved. Current as of April 2011 ENGLISH: PAGE 1 DEUTSCH: SEITE 13

More information

K Service Source. Video Conferencing. QuickTime Conferencing Kit, QuickTime Conferencing ISDN Kit

K Service Source. Video Conferencing. QuickTime Conferencing Kit, QuickTime Conferencing ISDN Kit K Service Source Video Conferencing QuickTime Conferencing Kit, QuickTime Conferencing ISDN Kit K Service Source Basics Video Conferencing Basics Introduction - 1 Introduction QuickTime Conferencing (QTC)

More information

22X DSP COLOR ZOOM CAMERA AUTO FOCUS ZOOM CAMERA

22X DSP COLOR ZOOM CAMERA AUTO FOCUS ZOOM CAMERA Instruction Manual 22X DSP COLOR ZOOM CAMERA AUTO FOCUS ZOOM CAMERA OPERATION / INSTALLATION MANUAL Thank you for using this product. Please read this manual carefully before use, Please keep this instruction

More information

ONBACK. We Offer Full Systems, Monitors, Cameras and Accessories. Call Us Toll Free: 1-800-535-0104 Fax: 740-366-0771 Website: www.holtzindustries.

ONBACK. We Offer Full Systems, Monitors, Cameras and Accessories. Call Us Toll Free: 1-800-535-0104 Fax: 740-366-0771 Website: www.holtzindustries. Thinking About Safety... Think RayView! A Division Of: Holtz Industries, Inc. We Offer Full Systems, Monitors, Cameras and Accessories We Accept These Major Credit Cards ONBACK Call For Safety s Sake Your

More information

USB-AD14f Data Acquisition System (USB)

USB-AD14f Data Acquisition System (USB) Data Acquisition System (USB) Measurement & Control. Super-Low Priced. Record and output signals with the USB-AD14f. The USB data acquisition system accomodated in a stable aluminum housing is ideal for

More information

OPL BASIC. Dosing System for Professional Laundry machines. Contents

OPL BASIC. Dosing System for Professional Laundry machines. Contents OPL BASIC Dosing System for Professional Laundry machines Contents 1 Getting Started. Page 2 2 Installation. Page 4 3 Set Up & Operation. Page 8 4 Maintenance & Accessories. Page 10 5 Troubleshooting Page

More information

OPENUPS. 6-30V Intelligent Uninterruptible Power Supply. Installation Guide. Version 1.0f P/N OPENUPS-06

OPENUPS. 6-30V Intelligent Uninterruptible Power Supply. Installation Guide. Version 1.0f P/N OPENUPS-06 OPENUPS 6-30V Intelligent Uninterruptible Power Supply Installation Guide Version 1.0f P/N OPENUPS-06 Before you start Please take a moment and read this manual before you install the OPENUPS. Often times,

More information

PRELIMINARY USER MANUAL

PRELIMINARY USER MANUAL KRAMER ELECTRONICS LTD. PRELIMINARY USER MANUAL MODELS: KDS-EN3 HD Video Encoder/Streamer KDS-DEC3 HD Video Decoder P/N: 2900-300375 Rev 1 Contents 1 Introduction 1 2 Getting Started 2 2.1 Achieving the

More information

EV-1000 Series DVR. Quick Operation Guide. Version 1.0.0

EV-1000 Series DVR. Quick Operation Guide. Version 1.0.0 EV-1000 Series DVR Quick Operation Guide Version 1.0.0 Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer. This manual is applicable to

More information

Product Information S N O. Portable VIP protection CCTV & Alarm System 2

Product Information S N O. Portable VIP protection CCTV & Alarm System 2 Product Information S N O Portable VIP protection CCTV & Alarm System 2 G O V E R N M E N T A L S E C U R I T Y S O L U T I VIP KIT Rapid Deployment VIP Protection Kit The VIP KIT has been designed to

More information

CCD Color Camera KP-D20BP-S3. Specifications. Hitachi Kokusai Electric Inc. DWN DSGN CHKD APPD. Tokyo Japan

CCD Color Camera KP-D20BP-S3. Specifications. Hitachi Kokusai Electric Inc. DWN DSGN CHKD APPD. Tokyo Japan CCD Color Camera KP-D20BP-S3 Specifications Hitachi Kokusai Electric Inc. 1. General The KP-D20BP-S3 is a single CCD type color camera utilizing digital signal processing in addition to digital control

More information

Real Time Clock USB Evaluation Board V3.0

Real Time Clock USB Evaluation Board V3.0 Real Time Clock USB Evaluation Board V.0 Application Note February 9, 008 RTC EVB Intersil RTC Devices Supported Introduction This evaluation board provides a platform for testing Intersil Real Time Clock

More information

USER MANUAL V5.0 ST100

USER MANUAL V5.0 ST100 GPS Vehicle Tracker USER MANUAL V5.0 ST100 Updated on 15 September 2009-1 - Contents 1 Product Overview 3 2 For Your Safety 3 3 ST100 Parameters 3 4 Getting Started 4 4.1 Hardware and Accessories 4 4.2

More information

Figure 1-A This end of the cable is the side that will be plugged into the power adapter and DVR Card.

Figure 1-A This end of the cable is the side that will be plugged into the power adapter and DVR Card. Follow these steps to properly connect your All-In-One Power and Video Cables to your camera and DVR Card. Required Tools: None A, First, remove the Cable from it s packaging and un-coil it enough to find

More information

UPS PIco. to be used with. Raspberry Pi B+, A+, B, and A. HAT Compliant. Raspberry Pi is a trademark of the Raspberry Pi Foundation

UPS PIco. to be used with. Raspberry Pi B+, A+, B, and A. HAT Compliant. Raspberry Pi is a trademark of the Raspberry Pi Foundation UPS PIco Uninterruptible Power Supply with Peripherals and I 2 C control Interface to be used with Raspberry Pi B+, A+, B, and A HAT Compliant Raspberry Pi is a trademark of the Raspberry Pi Foundation

More information

SECURITY CAMERA INSTRUCTION MANUAL ENGLISH VERSION 1.0 LBC5451. www.lorextechnology.com

SECURITY CAMERA INSTRUCTION MANUAL ENGLISH VERSION 1.0 LBC5451. www.lorextechnology.com SECURITY CAMERA INSTRUCTION MANUAL ENGLISH VERSION 1.0 LBC5451 www.lorextechnology.com Contents 1x Camera and mounting stand 1x Power adapter 1x Mounting kit 1x Allen key 1x Screw cap 1x 60 ft. (18m)

More information

USB-AD16f Data acquisition system (USB)

USB-AD16f Data acquisition system (USB) Data acquisition system (USB) Measurement & Control. Extremely powerful. Precisely record and output signals with the USB-AD16f: The high-performance USB data acquisition system accomodated in a stable

More information

LEN s.r.l. Via S. Andrea di Rovereto 33 c.s. 16043 CHIAVARI (GE) Tel. +39 0185 318444 - Fax +39 0185 472835 mailto: len@len.it url: http//www.len.

LEN s.r.l. Via S. Andrea di Rovereto 33 c.s. 16043 CHIAVARI (GE) Tel. +39 0185 318444 - Fax +39 0185 472835 mailto: len@len.it url: http//www.len. MA511 General Index 1 INTRODUCTION... 3 1.1 HARDWARE FEATURES:... 4 2 INTERFACE... 5 2.1 KEYBOARD... 6 2.2 POWER ON... 7 2.3 POWER OFF... 7 2.4 DETECTOR CONNECTION... 7 2.5 DETECTOR SUBSTITUTION...7 3

More information

Digitizer Capture Card - PCI RGB User Manual

Digitizer Capture Card - PCI RGB User Manual Digitizer Capture Card - PCI RGB User Manual Page 1 of 10 Table of Contents 1. Introduction... 3 2. Hardware Overview... 3 Resolutions...3 Framerate...4 Video Capture...4 3. Specification... 5 4. Software

More information

INTELLECT TM Software Package

INTELLECT TM Software Package AxxonSoft INTELLECT TM Software Package Quick Start Guide Version 1.0.0 Moscow 2010 1 Contents CONTENTS... 2 1 INTRODUCTION... 3 1.1 Document purpose... 3 1.2 Purpose of the Intellect software package...

More information

FB-500A User s Manual

FB-500A User s Manual Megapixel Day & Night Fixed Box Network Camera FB-500A User s Manual Quality Service Group Product name: Network Camera (FB-500A Series) Release Date: 2011/7 Manual Revision: V1.0 Web site: Email: www.brickcom.com

More information

Inuktun Digital Video Recorder (DVR) Start Guide and Manual

Inuktun Digital Video Recorder (DVR) Start Guide and Manual Inuktun Digital Video Recorder (DVR) Start Guide and Manual Version 1.6 June 2012 CONTENTS INTRODUCTION... 3 What s Included...3 Supported Devices and Protocols...3 Connecting your DVR...4 Installation

More information

HANTZ + PARTNER The Upgrade Company! www.hantz.com

HANTZ + PARTNER The Upgrade Company! www.hantz.com Quick Start Guide X3000 HD Network Media Player X3000 HD NETWORK MEDIA PLAYER POWER HANTZ + PARTNER The Upgrade Company! www.hantz.com A Get to know your HELIOS X3000 Thank you for purchasing the HELIOS

More information

Installing and configuring security system components guide

Installing and configuring security system components guide Installing and configuring security system components guide 1. Installing and configuring security system components guide. INTRODUCTION.................................... 7 2. Installation of security

More information

aseries DVR04/DVR08 DIGITAL VIDEO RECORDER Quick Operations Guide

aseries DVR04/DVR08 DIGITAL VIDEO RECORDER Quick Operations Guide aseries DVR04/DVR08 DIGITAL VIDEO RECORDER Quick Operations Guide UD.7L0202B1365B01 Thank you for purchasing our product. If there is any question or request, please do not hesitate to contact dealer.

More information

GSM Voice Auto Dialer & SMS Sender JC-999

GSM Voice Auto Dialer & SMS Sender JC-999 GSM Voice Auto Dialer & SMS Sender JC-999 Main features: () Large LCD display,integrated integrated keypad, human-friendly programming; (2) Support 2 alarm receiving numbers; (3) Triggering means: N.C

More information

CONTENTS. Section 1 Document Descriptions... 3. 1.1 Purpose of this Document... 3. 1.2 Nomenclature of this Document... 3

CONTENTS. Section 1 Document Descriptions... 3. 1.1 Purpose of this Document... 3. 1.2 Nomenclature of this Document... 3 CONTENTS Section 1 Document Descriptions... 3 1.1 Purpose of this Document... 3 1.2 Nomenclature of this Document... 3 Section 2 Solution Overview... 5 2.1 General Description... 5 2.2 Hardware and Software

More information

User Guide USB 2.0 LAPTOP DOCKING STATION WITH VIDEO N2953

User Guide USB 2.0 LAPTOP DOCKING STATION WITH VIDEO N2953 USB 2.0 LAPTOP DOCKING STATION WITH VIDEO 410-1864-001B / ACP51US 1 YEAR LIMITED WARRANTY: We pride ourselves on the quality of our products. For complete warranty details and a list of our worldwide offices,

More information

3 Specification. Master Chip Broadcom 1190. Keys Direct-button 1. Microphone 1. Amplifier 0.5W Speaker 0.5W. Voice

3 Specification. Master Chip Broadcom 1190. Keys Direct-button 1. Microphone 1. Amplifier 0.5W Speaker 0.5W. Voice I20-T Door Phone 1 Description I20-T Voice Access control is a digital IP door phone with Fanvil Voip Solutions (Broadcom chip 1190), stable and reliable. FDSP ensure voice loud and clear. Good looking,

More information

SFX DC-DC Power Supply For ATX Mother Board

SFX DC-DC Power Supply For ATX Mother Board SFX DC-DC Power Supply For ATX Mother Board Introduction Thank you, for purchasing an OPUS Solutions, Inc SFX DC-DC Power Supply. OPUS Solutions SFX DC-DC smart power supply is designed specifically for

More information

Installation Guide V8.2

Installation Guide V8.2 Installation Guide V8.2 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. 2008 GeoVision, Inc. All rights reserved. Under

More information

HTT 101. HDMI/YPbPr/S-Video/AV to DVB-T. HDMI/YPbPr/S Encoder Modulator

HTT 101. HDMI/YPbPr/S-Video/AV to DVB-T. HDMI/YPbPr/S Encoder Modulator HTT 101 HDMI/YPbPr/S-Video/AV to DVB-T HDMI/YPbPr/S DVB Encoder Modulator TABLE OF CONTENTS 1. SPECIFICATIONS... 3 1.1 Product Overview... 3 1.2 Appearance and Description... 3 1.3 System Diagram... 4

More information

HDMI/DVI to VGA/Component & Audio Break out Converter

HDMI/DVI to VGA/Component & Audio Break out Converter HDMI/DVI to VGA/Component & Audio Break out Converter User Manual (HCV VA) All information is subject to change without notice. All names & trademarks are property of their respective owners. Rev.1002

More information

Doc.No. NDP 192U-02. Electric Pump Controller CE-124P. Instruction Manual

Doc.No. NDP 192U-02. Electric Pump Controller CE-124P. Instruction Manual Doc.No. NDP 192U-02 Electric Pump Controller CE-124P Instruction Manual 1. Parts Name and Function 1) POWER LED Indicate that CE-124P is powered up. 2) START/STOP KEY (SELECTOR KEY) Used to start and stop

More information

Electronic Control Devices The European Product Catalogue 2007

Electronic Control Devices The European Product Catalogue 2007 FX14 Field Controller (1/4) FX14 Field Controller The FX14 is an equipment field controller in the Facility Explorer range of products. The controller is designed specifically for commercial Heating, Ventilating,

More information

www.vicon-security.com

www.vicon-security.com Data/Spec Sheet 16-Channel Hybrid Digital Video Recorder Configured with ViconNet Video Management Software (VMS) Scalable from one to hundreds of recorders Support for HD video and Megapixel cameras Real-time

More information

JNIOR. Overview. Get Connected. Get Results. JNIOR Model 310. JNIOR Model 312. JNIOR Model 314. JNIOR Model 410

JNIOR. Overview. Get Connected. Get Results. JNIOR Model 310. JNIOR Model 312. JNIOR Model 314. JNIOR Model 410 The INTEG is an Ethernet I/O (digital, analog) device that monitors and controls a small set of process signals. functions as both basic I/O for integration with another application or system AND as a

More information

Update date: 2015-08-31

Update date: 2015-08-31 Intelligent network camera APP and PC software User manual Update date: 2015-08-31 This manual applies to Product firmware version:13.0.0.53 Android COT Pro version:v8.3 IOS COT Pro version:v8.2 CMS Client

More information

TeamPoS2000-M Windows XP Pro Device Installation

TeamPoS2000-M Windows XP Pro Device Installation TeamPoS2000-M Windows XP Pro Device Installation 1. Install the target operating system. 2. Once Windows XP Pro is installed, a look at the Device Manager will show several devices not yet setup, as depicted

More information

CAUTION! THE 7I29 USES VOLTAGE AND POWER LEVELS THAT REPRESENT A HAZARD TO LIFE AND LIMB.

CAUTION! THE 7I29 USES VOLTAGE AND POWER LEVELS THAT REPRESENT A HAZARD TO LIFE AND LIMB. 7I29 MANUAL Rev 1.5 CAUTION! THE 7I29 USES VOLTAGE AND POWER LEVELS THAT REPRESENT A HAZARD TO LIFE AND LIMB. THE 7I29 IS INTENDED FOR USE BY OEMS THAT WILL INTEGRATE IT INTO A SYSTEM WITH INTERLOCKS AND

More information

HDMI INTO VGA/Audio MULTIMEDIA CONVERTER USER MANUAL (DS-40310)

HDMI INTO VGA/Audio MULTIMEDIA CONVERTER USER MANUAL (DS-40310) HDMI INTO VGA/Audio MULTIMEDIA CONVERTER USER MANUAL (DS-40310) Table of Contents 1.0 Introduction...2 2.0 Specifications.. 2 3.0 Package Contents...3 4.0 Panel Descriptions...3 5.0 Connection and Operation.....4

More information

USB Starter Kit AMS 5812

USB Starter Kit AMS 5812 User Guide USB Starter Kit AMS 5812 Phone:+49 (0)6131/91 0730-0 Fax: +49 (0)6131/91 073-30 Internet: E Mail: info@analogmicro.de Analog Microelectronics GmbH An der Fahrt 13, D 55124 Mainz May 2012 - Rev.

More information

LCD Monitor User Manual

LCD Monitor User Manual LCD Monitor User Manual Products: LCD17-5, LCD19-5 Please read this manual before using your monitor, and always follow instructions for proper use. Please save this manual for future reference. LCD17-19_DM

More information

Chapter I Model801, Model802 Functions and Features

Chapter I Model801, Model802 Functions and Features Chapter I Model801, Model802 Functions and Features 1. Completely Compatible with the Seventh Generation Control System The eighth generation is developed based on the seventh. Compared with the seventh,

More information

Installing and configuring security system components guide

Installing and configuring security system components guide Installing and configuring security system components guide 1. Installing and configuring security system components guide. INTRODUCTION.................................... 7 2. Installing security system

More information

Duct Humidity Transmitter

Duct Humidity Transmitter SDC-H Duct Humidity Transmitter Features Replaceable sensor element Humidity measurement for air ducts Minimum and maximum value memory 0 0V, 0 0mA or 0V, 4 0mA measuring signals selectable with jumpers

More information

PCXpocket 440. Professional Digital Audio Card. User s manual. www.digigram.com DU 144600201 IS=A

PCXpocket 440. Professional Digital Audio Card. User s manual. www.digigram.com DU 144600201 IS=A PCXpocket 440 Professional Digital Audio Card User s manual www.digigram.com DU 144600201 IS=A CONTENTS Information for the user 1 Overview 2 Installation 3 Specifications 4-5 Schematic diagram 6-7 Copyright

More information

USER MANUAL MODEL 72-7480

USER MANUAL MODEL 72-7480 PATTERN GENERATOR Introduction Through the use of portable HDMI pattern generator MODEL 72-7480, you are able to use 48 timings and 34 patterns, and operate it continuously for 6~8 hours after the battery

More information

IF-FW/DM @# Release Notes

IF-FW/DM @# Release Notes IF-FW/DM @# Release Notes Updates Always ensure that you are running the latest driver software and IF-FW/DMmkII firmware by visiting TASCAM s web site at http://www.tascam.com. How to Update Windows driver

More information

XTreme Files OS & Data Backup/Restore User Manual Please read the Instruction manual before using the XTreme Files (F Series) 1.

XTreme Files OS & Data Backup/Restore User Manual Please read the Instruction manual before using the XTreme Files (F Series) 1. XTreme Files OS & Data Backup/Restore User Manual Please read the Instruction manual before using the XTreme Files (F Series) 1. The suggested interface for your computer is USB2.0 to have better speed

More information

BrightSign Expander Hardware Guide

BrightSign Expander Hardware Guide Hardware Guide PCBA: Rev C Version: 0.1 Saratoga, CA, USA 1 Table of Contents OVERVIEW... 3 EXPANDER BLOCK DIAGRAM... 4 PORTS... 6 POWER CONNECTOR... 6 OPTICAL SPDIF CONNECTOR... 6 DB25 SWITCH/LED CONNECTOR...

More information

Neo-Neon. LED Vision Mesh Screen Operation Manual. LED Vision Mesh Screen. Neo-Neon International Ltd He Shan Decorative Lighting Company Limited

Neo-Neon. LED Vision Mesh Screen Operation Manual. LED Vision Mesh Screen. Neo-Neon International Ltd He Shan Decorative Lighting Company Limited Neo-Neon LED Vision Mesh Screen Operation Manual He Shan Decorative Lighting Company Limited LED Display Engineering Department 1 Contents Chapter1 Specification and Function Parameters 3 Chapeter2 Structure

More information

ACARD ATA-133 AEC-6280M

ACARD ATA-133 AEC-6280M ACARD ATA-133 AEC-6280M PCI-to-IDE ATA-133 Controller for Macintosh User s Manual Version:1.1 Copyright 2001 ACARD Technology Corp. Table of Contents Chapter 1 Introduction... 4 1.1 Introduction... 4 1.2

More information

ENGLISH. matrox Millennium G550. User Guide 10776-301-0200 2005.07.29

ENGLISH. matrox Millennium G550. User Guide 10776-301-0200 2005.07.29 ENGLISH matrox Millennium G550 User Guide 10776-301-0200 2005.07.29 Hardware installation This section describes how to install your Matrox card. If your Matrox graphics card is already installed in your

More information

Name Description Model Number. Parameters Min. Typ. Max. Note. Vaux Voltage 9.8 V 12 V 13.2 V Auxiliary Supply Voltage

Name Description Model Number. Parameters Min. Typ. Max. Note. Vaux Voltage 9.8 V 12 V 13.2 V Auxiliary Supply Voltage Description Supports DALI interface driver Programming Supports 0-10V Programmable Driver Programming Supports Other Controllers (TDD-ANPNx, SDD-AAPNx) Off-line programming capability Auto programming

More information

Matrix 4 Installation & User Guide V 6.0

Matrix 4 Installation & User Guide V 6.0 Matrix 4 Installation & User Guide V 6.0 Cloud Electronics Limited 140 Staniforth Road, Sheffield, S9 3HF England Tel +44 (0) 114 244 7051 Fax +44 (0) 114 242 5462 Matrix 4 INSTALLATION AND OPERATION MANUAL

More information

NC-12 Modbus Application

NC-12 Modbus Application NC-12 Modbus Application NC-12 1 Table of Contents 1 Table of Contents... 2 2 Glossary... 3 SCADA...3 3 NC-12 Modbus in general... 3 4 Entire system... 4 4.1 PFC to PC connection alternatives...4 4.1.1

More information

How to Install a Motherboard

How to Install a Motherboard How to Install a Motherboard This guide is by no means comprehensive, but serves as a general guide to installing a JNCS motherboard bundle into a standard ATX case. JNCS has already set any relevant jumpers

More information

MICROGATE SERIAL COMMUNICATIONS RUN TIME KIT WINDOWS GUIDE

MICROGATE SERIAL COMMUNICATIONS RUN TIME KIT WINDOWS GUIDE MICROGATE SERIAL COMMUNICATIONS RUN TIME KIT WINDOWS GUIDE MicroGate Systems, Ltd http://www.microgate.com MicroGate and SyncLink are registered trademarks of MicroGate Systems, Ltd. Copyright 2012-2016

More information

e-4 AWT07MLED 7 Q TFT LCD MONITOR (LED Backlighted) USER MANUAL

e-4 AWT07MLED 7 Q TFT LCD MONITOR (LED Backlighted) USER MANUAL Thank you for purchasing our product. Please read this User s Manual before using the product. Change without Notice AWT07MLED 7 Q TFT LCD MONITOR (LED Backlighted) USER MANUAL e-4 SAFETY PRECAUTIONS Federal

More information

HUS-NVR CHANNEL NETWORK VIDEO RECORDER. RAID

HUS-NVR CHANNEL NETWORK VIDEO RECORDER.  RAID Honeywell HUS-NVR-6032 is a 32-channel network video recorder (NVR) that supports realtime video/audio, live viewing and playback. It can also be applied as an IP storage device in large-scale deployments.

More information

I STAR COMPUTER CO., LTD

I STAR COMPUTER CO., LTD I STAR COMPUTER CO., LTD Mini Redundant Power Supply 300W+300W for IPC-Computer Model No. TC-300R8 Table of content 1. Introduction...1 2. Specification 2.1 Input Voltage...1 2.2 DC Output...1 2.3 PS-ON

More information

Genesi Pegasos II Setup

Genesi Pegasos II Setup Freescale Semiconductor Application Note AN2666 Rev. 0, 07/2004 Genesi Pegasos II Setup by Maurie Ommerman CPD Applications Freescale Semiconductor, Inc. Austin, TX This application note is the first in

More information

GRAND Wi-Fi SURVEILLANCE SYSTEM

GRAND Wi-Fi SURVEILLANCE SYSTEM Version E1.1 GRAND Wi-Fi SURVEILLANCE SYSTEM (Color QUAD Processor / 802.11g Video & Audio Transmission / SATA HDD Storage) 1. INTRODUCTION GRAND is pleased to introduce the latest in Wireless DVR technology-

More information

UPiS - Uninterruptible Power intelligent Supply

UPiS - Uninterruptible Power intelligent Supply UPiS - Uninterruptible Power intelligent Supply www.pimodules.com Introduction The UPiS is an Advanced Powering add-on Module for the RaspberryPi that adds a wealth of additional features to the powering

More information

Monitor Characteristics

Monitor Characteristics Monitor Characteristics ENERGY STAR qualified monitors automatically enter two successive low-power modes of less than or equal to 15 watts and 8 watts after a period of inactivity. New chip technologies

More information

QUICK REFERENCE MANUAL

QUICK REFERENCE MANUAL PIONEER PLASMA DISPLAY SYSTEM QUICK REFERENCE MANUAL PDP-501HD: PLASMA DISPLAY PANEL PDP-501R: MEDIA RECEIVER PDP-501S-LR: SPEAKERS TABLE OF CONTENTS 1.0 CHOOSE THE INSTALLATION SITE...2 2.0 SET UP THE

More information

Installation manual NVB-A

Installation manual NVB-A Installation manual NVB-A IMPORTANT SAFEGUARDS AND WARNINGS 1. Read, keep, and follow these instructions. 2. Heed all warnings. 3. This unit contains sensitive electric components, which can be damaged

More information

2.5" XTreme Files OS & Data Backup/Restore User Manual Please read the Instruction manual before using the XTreme Files (X Series) 1.

2.5 XTreme Files OS & Data Backup/Restore User Manual Please read the Instruction manual before using the XTreme Files (X Series) 1. 2.5" XTreme Files OS & Data Backup/Restore User Manual Please read the Instruction manual before using the XTreme Files (X Series) 1. The suggested interface for your computer is USB2.0 to have better

More information

Second Display Installation Guide Point-of-Sale Hardware System

Second Display Installation Guide Point-of-Sale Hardware System Second Display Installation Guide Point-of-Sale Hardware System 48200150 August 2002 V1.0 1. Accessory VGA Cable Serial Cable Warranty Card Drivers Bank The following drivers in the folders of Driver Bank

More information

VME IF PHASE MODULATOR UNIT. mod. 205-01

VME IF PHASE MODULATOR UNIT. mod. 205-01 mod. 205-01 02/06 B 1/12 INDEX 1 DESCRIPTION pg. 3 2 FRONT VIEW pg. 4-5 3 TECHNICAL CHARACTERISTICS pg. 6-7 4 OPERATING INSTRUCTIONS pg. 8 5 ANNEX LIST pg. 12 02/06 B 2/12 1 - DESCRIPTION The PHASE MODULATOR

More information

Current Monitoring Kit

Current Monitoring Kit Current Monitoring Kit QUICK START GUIDE DO090-6 CONTENTS Issues: 1) 2.10.02 WP A4 format 2) 2.10.02 Added safety warning 3) 17.3.06 Word A5 format. S1: Removed relay modules. S2: Added MI010. S4.1: added

More information

PCM3.1 XG-CAM NTV-KIT375/385

PCM3.1 XG-CAM NTV-KIT375/385 3950 NW 120 th Ave, Coral Springs, FL 33065 TEL 561-955-9770 FAX 561-955-9760 www.nav-tv.com info@nav-tv.com PCM3.1 XG-CAM NTV-KIT375/385 Overview The PCM3.1 XG-CAM integrates an aftermarket camera into

More information

ZMR 80 STEREO MODULAR ZONER USERS MANUAL

ZMR 80 STEREO MODULAR ZONER USERS MANUAL ZMR 80 STEREO MODULAR ZONER USERS MANUAL Lime Technologies http://limetechnologies.co.uk Tel: 08712 233127 ZMR80 Stereo Modular Zoner Mixer Introduction The modular construction of the ZMR80 allows it

More information

M-CT7 Camera-Top Monitor

M-CT7 Camera-Top Monitor M-CT7 Camera-Top Monitor Owner s Manual 1 Thank you for purchasing a Marshall M-CT7 camera-top monitor. The M-CT7 is a great tool for focusing, composing, and viewing images/video clips directly from your

More information

D/N VANDAL RES. VARI-FOCAL IR DOME CAMERA

D/N VANDAL RES. VARI-FOCAL IR DOME CAMERA D/N VANDAL RES. VARI-FOCAL IR DOME CAMERA PIH-0746XW/0746XS INSTRUCTION MANUAL IMPORTANT SAFEGUARDS CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE

More information

DS-7200HWI-SH/A Series DVR. Technical Specification

DS-7200HWI-SH/A Series DVR. Technical Specification DS-7200HWI-SH/A Series DVR Technical Specification Notices The information in this documentation is subject to change without notice and does not represent any commitment on behalf of HIKVISION. HIKVISION

More information

Your Data Security Guardian. SafeTANK GR5630-WSB3+ User Manual. v.1.0 (Oct, 2012) www.raidon.com.tw

Your Data Security Guardian. SafeTANK GR5630-WSB3+ User Manual. v.1.0 (Oct, 2012) www.raidon.com.tw SafeTANK GR5630-WSB3+ User Manual v..0 (Oct, 202) Introduction Thank you for purchasing RAIDON products. This manual will introduce the GR5630-WSB3+. Before using your GR5630-WSB3+, please read this manual

More information

ABB Drives. User s Manual HTL Encoder Interface FEN-31

ABB Drives. User s Manual HTL Encoder Interface FEN-31 ABB Drives User s Manual HTL Encoder Interface FEN-31 HTL Encoder Interface FEN-31 User s Manual 3AUA0000031044 Rev B EN EFFECTIVE: 2010-04-06 2010 ABB Oy. All Rights Reserved. 5 Safety instructions

More information

. ImagePRO. ImagePRO-SDI. ImagePRO-HD. ImagePRO TM. Multi-format image processor line

. ImagePRO. ImagePRO-SDI. ImagePRO-HD. ImagePRO TM. Multi-format image processor line ImagePRO TM. ImagePRO. ImagePRO-SDI. ImagePRO-HD The Folsom ImagePRO TM is a powerful all-in-one signal processor that accepts a wide range of video input signals and process them into a number of different

More information

Remote Management Card

Remote Management Card Remote Management Card User s Guide 07/2004 8115-01_RMC CONTENTS Safety Indications... 3 About Remote Management Card... 4 Components... 4 Installation / Removal / Replacement... 5 Installation... 6 Removal...

More information

VFS24/32HDIP. Public Display IP Monitor User Manual

VFS24/32HDIP. Public Display IP Monitor User Manual VFS24/32HDIP Public Display IP Monitor User Manual 2 Contents Before You Begin...4 Side Panel Control buttons...6 Connections...7 OSD Function...7 LCD monitor Mounting Guide...9 Getting started... 10 Power

More information

User Manual I1010Q16DCZ

User Manual I1010Q16DCZ User Manual I1010Q16DCZ Explanation, Note and Warning *Explanation: important information, which can help you better use your tablet PC. *Note: indicates that not observing the content may result in hardware

More information

3TrinsRGB+1c Manual V1 2013/2014

3TrinsRGB+1c Manual V1 2013/2014 3TrinsRGB+1c Manual V1 2013/2014 3TrinsRGB+1c is a analog audio video synthesizer, with the HEF40106 ic as oscillator source. The reason for using this ic is that it is used a lot by people just starting

More information

DN1600 MEGA SPIN Installation Guide INNOVATIVE CONCEPTS IN ENTERTAINMENT INC. 10123 MAIN STREET, CLARENCE, NY 14031 SERVICE: 1-716-759-0360 FAX:

DN1600 MEGA SPIN Installation Guide INNOVATIVE CONCEPTS IN ENTERTAINMENT INC. 10123 MAIN STREET, CLARENCE, NY 14031 SERVICE: 1-716-759-0360 FAX: DN600 MEGA SPIN Installation Guide INNOVATIVE CONCEPTS IN ENTERTAINMENT INC. 0 MAIN STREET, CLARENCE, NY 40 SERVICE: -76-759-060 FAX: -76-759-0884 EMAIL: service@icegame.com WEBSITE: www.icegame.com Your

More information

MAX6683 Evaluation System/Evaluation Kit

MAX6683 Evaluation System/Evaluation Kit 19-2343; Rev 1; 3/07 MAX6683 Evaluation System/Evaluation Kit General Description The MAX6683 evaluation system (EV system) consists of a MAX6683 evaluation kit (EV kit) and a companion Maxim CMODUSB board.

More information

CINEMA SB100 powered soundbar speaker

CINEMA SB100 powered soundbar speaker CINEMA SB100 powered soundbar speaker quick-start guide Thank You For Choosing This JBL Product The JBL Cinema SB100 powered soundbar speaker is a complete, integrated sound system that will dramatically

More information

3D STEREO SETUP WITH PROJECTOR

3D STEREO SETUP WITH PROJECTOR 3D STEREO SETUP WITH PROJECTOR DA-07307-001_v01 June 2014 Application Note DOCUMENT CHANGE HISTORY DA-07307-001_v01 Version Date Authors Description of Change 01 June 18, 2014 EL, SM Initial Release 3D

More information

SBC8600B Single Board Computer

SBC8600B Single Board Computer SBC8600B Single Board Computer 720MHz TI s Sitara AM3359 ARM Cortex-A8 Microprocessor Onboard 512MByte DDR3 SDRAM and 512MByte NAND Flash UARTs, 2*USB Host and 1*OTG, 2*Ethernet, CAN, RS485, LCD/TSP, Audio,

More information

SPC-530. Rackmount Server PC. User's Manual

SPC-530. Rackmount Server PC. User's Manual SPC-530 Rackmount Server PC User's Manual Copyright Notice This document is copyrighted, April 2000, by Advantech Co., Ltd. All rights are reserved. Advantech Co., Ltd. reserves the right to make improvements

More information

2 X 250Watt Class D Audio Amplifier Board IRS2092 User s Guide

2 X 250Watt Class D Audio Amplifier Board IRS2092 User s Guide 2 X 250Watt Class D Audio Amplifier Board IRS2092 User s Guide 2004-2013 Sure Electronics Inc. AA-AB32291_Ver1.0 2 X 250Watt Class D Audio Amplifier Board IR2092 Note: Please read this manual carefully

More information

External Filter Requirements for Reducing DC Offset on the Analog Video Outputs of Telestream ClipMail Appliances

External Filter Requirements for Reducing DC Offset on the Analog Video Outputs of Telestream ClipMail Appliances APPLICATION NOTE Introduction External Filter Requirements for Reducing DC Offset on the Analog Video Outputs of Telestream ClipMail Appliances This application note is for users of ClipMail Pro and older

More information