PAK-P and PAK-C ENVIRONMENTAL ENGINEERING SOFTWARE. ITC Software. Projects Serbia and Montenegro DEVELOPMENT OF THE PRVONEK DAM
|
|
- Rudolph Dawson
- 8 years ago
- Views:
Transcription
1 ITC Software ENVIRONMENTAL ENGINEERING SOFTWARE PAK-P and PAK-C Projects Serbia and Montenegro DEVELOPMENT OF THE PRVONEK DAM Steinbeis Transfer Center for Biomedical Research Ltd. Kragujevac, University of Kragujevac, and the Institute for Water Resources Jaroslav Cerni, Belgrade Go to for further finite element projects and applications ITC Software All rights reserved.
2 EXAMPLE APPLICATIONS IN GEOMECHANICS DEVELOPMENT OF THE PRVONEK DAM Download further geomechanical project presentations: at EXPLOITATION OF THE "TILVA ROSH" MINE UNDERGROUND POLLUTION PROBLEMS
3 PAK-P A Finite Element 2D and 3D Program for Analysis of Groundwater Seepage Linear and nonlinear analysis: steady, time-dependent problems Saturated/unsaturated flow Position of free surface Boundary conditions: prescribed head, pressure, seepage face Infiltration: special treatment of rain
4 Special algorithm for nodes at seepage face Material characteristics: Variable conductivity for unsaturated soil region Seepage forces: Calculation of nodal forces due to fluid flow, generated in the format for FE structure program
5 PAK-C Finite Element Program For Coupled Problems Multiphase Fluid Flow with Heat Transfer Through Porous Deformable Medium Linear and Geometric and Material Analysis, Linear and nonlinear solid, stationary and nonstationary, compressible and incompressible fluid Static and Dynamic Analysis Material Characteristics: Variation of porosity, elastic and elastoplastic consolidation, elastic, elastoplastic Cam-clay, thermoelastic material models, modelling of subsidence Heat transfer and fluid flow Multiphase flow
6 DEVELOPMENT OF THE PRVONEK DAM
7 BASIC DATA FOR DAM PRVONEK DISPOSITION OF THE DAM
8 CROSS-SECTION OF THE DAM
9 GEOMETRICAL DEFINITION OF THE MODEL 3D VIEW
10 GEOMETRICAL DEFINITION OF THE MODEL 2D VIEW
11 POTENTIAL FIELD
12 Results POTENTIAL FIELD КОТА
13 POTENTIAL FIELD CROSS-SECTION RESULTS
14 POTENTIAL FIELD КОТА УСПОРА
15 VELOCITY FIELD ВАРИЈАНТА ВДП ЗАВЕСЕ БЕЗ 32 1 LuЗАВЕСЕ
16 ANIMATION OF POTENTIAL FIELD ON THE PROVONEK DAM
17 Unsteady Potential Field on Dam
18 Filling of the Dam
19 Rain Flow
20 Two-dimensional nonlinear material consolidation
21 ITC Software is an advanced information technology solutions provider, focused on the global commercial and scientific markets. With over 4047 software engineers in the Americas, Europe, Russia and Asia, and a host of world-renowned scientists at, inter alia, Harvard and MIT, ITC Software s services range from research & development in finance, bioinformatics and FEA engineering, to cutting-edge custom software development and maintenance services in most industry verticals, to the turnkey establishment of Offshore IT Centers. ITC Software has won numerous international awards and its centers are ISO 9001:2000 certified and CMMI level 4 pre-certified. Pricing is extremely competitive for both complex scientific applications such as bioinformatics and biomechanics, and commercial software development projects. Please call or us, if you have any questions, need more information, would like to embark on a research project, or require software development services Tel info@itcsoftware.com Become a high performance enterprise with Strategic Outsourcing, visit Thank you!
22 We hope you enjoyed our presentation! ITC Software For more information on : finite software solutions, finite element applications, and/or assistance with your industrial design and engineering projects, please visit our website: or contact: Prof. Kojic and Prof. Filipovic at : ITC Software.com Tel.: info@itcsoftware.com
APPLICATION SOFTWARE DEVELOPMENT BASIS
APPLICATION SOFTWARE DEVELOPMENT BASIS ITC Software Ivanov, Vladimir Software Program Manager Outline Process And Technology Common requirements for the software development process Application framework
More informationFLORA* ihis 2004-2010 ITC Software / Lejanix All rights reserved.
ITC Software FLORA* ihis 2004-2010 ITC Software / Lejanix All rights reserved. The access to the patient sensitive emergency care data is secured by a) Sign on procedures b) security logs c) Oracle9 database
More informationITC Software. presents. Copyright 2004-20011 All rights reserved. ITC Software
ITC Software presents Copyright 2004-20011 All rights reserved. ITC Software Business Process Outsourcing BPO is the delegation of one or more IT-intensive business processes to an external provider who,
More informationCAE -Finite Element Method
16.810 Engineering Design and Rapid Prototyping Lecture 3b CAE -Finite Element Method Instructor(s) Prof. Olivier de Weck January 16, 2007 Numerical Methods Finite Element Method Boundary Element Method
More informationFinite Element Method (ENGC 6321) Syllabus. Second Semester 2013-2014
Finite Element Method Finite Element Method (ENGC 6321) Syllabus Second Semester 2013-2014 Objectives Understand the basic theory of the FEM Know the behaviour and usage of each type of elements covered
More informationDYNAMIC RESPONSE OF CONCRETE GRAVITY DAM ON RANDOM SOIL
International Journal of Civil Engineering and Technology (IJCIET) Volume 6, Issue 11, Nov 2015, pp. 21-31, Article ID: IJCIET_06_11_003 Available online at http://www.iaeme.com/ijciet/issues.asp?jtype=ijciet&vtype=6&itype=11
More informationTWO-DIMENSIONAL FINITE ELEMENT ANALYSIS OF FORCED CONVECTION FLOW AND HEAT TRANSFER IN A LAMINAR CHANNEL FLOW
TWO-DIMENSIONAL FINITE ELEMENT ANALYSIS OF FORCED CONVECTION FLOW AND HEAT TRANSFER IN A LAMINAR CHANNEL FLOW Rajesh Khatri 1, 1 M.Tech Scholar, Department of Mechanical Engineering, S.A.T.I., vidisha
More informationCHAPTER 4 4 NUMERICAL ANALYSIS
41 CHAPTER 4 4 NUMERICAL ANALYSIS Simulation is a powerful tool that engineers use to predict the result of a phenomenon or to simulate the working situation in which a part or machine will perform in
More informationExpress Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology
Express Introductory Training in ANSYS Fluent Lecture 1 Introduction to the CFD Methodology Dimitrios Sofialidis Technical Manager, SimTec Ltd. Mechanical Engineer, PhD PRACE Autumn School 2013 - Industry
More informationCAE -Finite Element Method
16.810 Engineering Design and Rapid Prototyping CAE -Finite Element Method Instructor(s) Prof. Olivier de Weck January 11, 2005 Plan for Today Hand Calculations Aero Æ Structures FEM Lecture (ca. 45 min)
More informationA COMPARATIVE STUDY OF TWO METHODOLOGIES FOR NON LINEAR FINITE ELEMENT ANALYSIS OF KNIFE EDGE GATE VALVE SLEEVE
International Journal of Mechanical Engineering and Technology (IJMET) Volume 6, Issue 12, Dec 2015, pp. 81-90, Article ID: IJMET_06_12_009 Available online at http://www.iaeme.com/ijmet/issues.asp?jtype=ijmet&vtype=6&itype=12
More information4.3 Results... 27 4.3.1 Drained Conditions... 27 4.3.2 Undrained Conditions... 28 4.4 References... 30 4.5 Data Files... 30 5 Undrained Analysis of
Table of Contents 1 One Dimensional Compression of a Finite Layer... 3 1.1 Problem Description... 3 1.1.1 Uniform Mesh... 3 1.1.2 Graded Mesh... 5 1.2 Analytical Solution... 6 1.3 Results... 6 1.3.1 Uniform
More informationFinite Element Method
16.810 (16.682) Engineering Design and Rapid Prototyping Finite Element Method Instructor(s) Prof. Olivier de Weck deweck@mit.edu Dr. Il Yong Kim kiy@mit.edu January 12, 2004 Plan for Today FEM Lecture
More informationEmbankment Consolidation
Embankment Consolidation 36-1 Embankment Consolidation In this tutorial, RS2 is used for a coupled analysis of a road embankment subject to loading from typical daily traffic. Model Start the RS2 9.0 Model
More informationModelling the Discharge Rate and the Ground Settlement produced by the Tunnel Boring
Modelling the Discharge Rate and the Ground Settlement produced by the Tunnel Boring Giona Preisig*, Antonio Dematteis, Riccardo Torri, Nathalie Monin, Ellen Milnes, Pierre Perrochet *Center for Hydrogeology
More informationMEL 807 Computational Heat Transfer (2-0-4) Dr. Prabal Talukdar Assistant Professor Department of Mechanical Engineering IIT Delhi
MEL 807 Computational Heat Transfer (2-0-4) Dr. Prabal Talukdar Assistant Professor Department of Mechanical Engineering IIT Delhi Time and Venue Course Coordinator: Dr. Prabal Talukdar Room No: III, 357
More informationCAE - CFD & FEA Manufacturing Support Value Engineering
Mechanical Design Services Reverse Engineering & Rapid Prototyping CAE - CFD & FEA Manufacturing Support Value Engineering Automotive Engineering Services ISO 9001 ISO 22301 ISO/IEC 27001 Product Life-Cycle
More informationME6130 An introduction to CFD 1-1
ME6130 An introduction to CFD 1-1 What is CFD? Computational fluid dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions, and related phenomena by solving numerically
More informationSIMULATION OF PIEZOCONE PENETRATION IN SATURATED POROUS MEDIUM USING THE FE REMESHING TECHNIQUE
F O U N D A T I O N S O F C I V I L A N D E N V I R O N M E N T A L E N G I N E E R I N G No. 6 2005 Darius MARKAUSKAS *, Rimantas KAIANAUSKAS *, Rolf KATZENBACH ** * Vilnius Gediminas Technical University
More informationBehaviour of buildings due to tunnel induced subsidence
Behaviour of buildings due to tunnel induced subsidence A thesis submitted to the University of London for the degree of Doctor of Philosophy and for the Diploma of the Imperial College of Science, Technology
More informationModule Handbook Civil Engineering (M.Sc.)
Module Handbook Winter Term 2015/2016 Short version Date: 14.09.2015 Department of Civil Engineering, Geo- and Environmental Sciences KIT - University of the State of Baden-Wuerttemberg and National Research
More informationThree-dimensional finite element stress analysis of SKY implant system
Journal of the Serbian Society for Computational Mechanics / Vol. 4 / No. 2, 2010 / pp. 87-96 (UDC: 616.314-77) Three-dimensional finite element stress analysis of SKY implant system M. Kalanović 1*, N.
More informationMesh Moving Techniques for Fluid-Structure Interactions With Large Displacements
K. Stein Department of Physics, Bethel College, St. Paul, MN 55112 T. Tezduyar Mechanical Engineering, Rice University, MS 321, Houston, TX 77005 R. Benney Natick Soldier Center, Natick, MA 01760 Mesh
More informationTRAVELING WAVE EFFECTS ON NONLINEAR SEISMIC BEHAVIOR OF CONCRETE GRAVITY DAMS
TRAVELING WAVE EFFECTS ON NONLINEAR SEISMIC BEHAVIOR OF CONCRETE GRAVITY DAMS H. Mirzabozorg 1, M. R. Kianoush 2 and M. Varmazyari 3 1,3 Assistant Professor and Graduate Student respectively, Department
More informationCastNet: Modelling platform for open source solver technology
CastNet: Modelling platform for open source solver technology. DHCAE Tools GmbH Address: Friedrich-Ebert-Str. 368, 47800 Krefeld, Germany / Company site: Alte Rather Str. 207 / 47802 Krefeld Phone +49
More informationPaper Pulp Dewatering
Paper Pulp Dewatering Dr. Stefan Rief stefan.rief@itwm.fraunhofer.de Flow and Transport in Industrial Porous Media November 12-16, 2007 Utrecht University Overview Introduction and Motivation Derivation
More informationHow To Run A Cdef Simulation
Simple CFD Simulations and Visualisation using OpenFOAM and ParaView Sachiko Arvelius, PhD Purpose of this presentation To show my competence in CFD (Computational Fluid Dynamics) simulation and visualisation
More informationOverview. also give you an idea of ANSYS capabilities. In this chapter, we will define Finite Element Analysis and. Topics covered: B.
2. FEA and ANSYS FEA and ANSYS Overview In this chapter, we will define Finite Element Analysis and also give you an idea of ANSYS capabilities. Topics covered: A. What is FEA? B. About ANSYS FEA and ANSYS
More informationList of Graduate Level Courses in Civil Engineering
List of Graduate Level Courses in Civil Engineering Students should visit the York University courses web site for a listing of courses being offered (https://w2prod.sis.yorku.ca/apps/webobjects/cdm) during
More informationPragmatic multi-scale and multi-physics analysis of Charles Bridge in Prague
Pragmatic multi-scale and multi-physics analysis of Charles Bridge in Prague Jiří Šejnoha 1,2 Michal Šejnoha 1,2 Jan Zeman 1 Jan Novák 1,2 with Zdeněk Janda, Jiří Maděra, Jan Vorel and Jan Sýkora 1 Department
More informationTwinMesh for Positive Displacement Machines: Structured Meshes and reliable CFD Simulations
TwinMesh for Positive Displacement Machines: Structured Meshes and reliable CFD Simulations 05.06.2014 Dipl.-Ing. Jan Hesse, Dr. Andreas Spille-Kohoff CFX Berlin Software GmbH Karl-Marx-Allee 90 A 10243
More informationCHEG 3128 Heat, Mass, & Kinetics Laboratory Diffusion in Laminar Flow Regimes Modeling and COMSOL Tutorial Tutorial by Andrea Kadilak
CHEG 3128 Heat, Mass, & Kinetics Laboratory Diffusion in Laminar Flow Regimes Modeling and COMSOL Tutorial Tutorial by Andrea Kadilak Introduction COMSOL is a computer modeling software package that will
More informationIntroductory FLUENT Training
Chapter 10 Transient Flow Modeling Introductory FLUENT Training www.ptecgroup.ir 10-1 Motivation Nearly all flows in nature are transient! Steady-state assumption is possible if we: Ignore transient fluctuations
More informationNumerical Simulation of Temperature and Stress Fields in the Rock Heating Experiment
Numerical Simulation of Temperature and Stress Fields in the Rock Heating Experiment Author P. Rálek 1*, M. Hokr 1 1 Technical University of Liberec, Liberec, Czech Republic *Corresponding author: petr.ralek@tul.cz
More informationThe simulation of machine tools can be divided into two stages. In the first stage the mechanical behavior of a machine tool is simulated with FEM
1 The simulation of machine tools can be divided into two stages. In the first stage the mechanical behavior of a machine tool is simulated with FEM tools. The approach to this simulation is different
More informationNUMERICAL ANALYSIS OF THE EFFECTS OF WIND ON BUILDING STRUCTURES
Vol. XX 2012 No. 4 28 34 J. ŠIMIČEK O. HUBOVÁ NUMERICAL ANALYSIS OF THE EFFECTS OF WIND ON BUILDING STRUCTURES Jozef ŠIMIČEK email: jozef.simicek@stuba.sk Research field: Statics and Dynamics Fluids mechanics
More informationSOUTH AFRICAN NATIONAL INSTITUTE OF ROCK MECHANICS CHAMBER OF MINES OF SOUTH AFRICA CERTIFICATE IN ROCK MECHANICS PART 1 ROCK MECHANICS THEORY
SOUTH AFRICAN NATIONAL INSTITUTE OF ROCK MECHANICS CHAMBER OF MINES OF SOUTH AFRICA CERTIFICATE IN ROCK MECHANICS PART 1 ROCK MECHANICS THEORY SYLLABUS Copyright 2006 SANIRE CONTENTS PREAMBLE... 3 TOPICS
More informationMultiphysics Software Applications in Reverse Engineering
Multiphysics Software Applications in Reverse Engineering *W. Wang 1, K. Genc 2 1 University of Massachusetts Lowell, Lowell, MA, USA 2 Simpleware, Exeter, United Kingdom *Corresponding author: University
More informationFinite Element Methods (in Solid and Structural Mechanics)
CEE570 / CSE 551 Class #1 Finite Element Methods (in Solid and Structural Mechanics) Spring 2014 Prof. Glaucio H. Paulino Donald Biggar Willett Professor of Engineering Department of Civil and Environmental
More informationWhat we know: shale gas as a promising global energy resource for the future. What we need to know: the scientific challenges.
Laboratory of Soil Mechanics,Chair Gaz Naturel - Petrosvibri LMS-EPFL Prof. L. Laloui Gas Opportunities, Challenges and Achievements - «EFFICIENCE 21», Automne 2013... Geomechanics: a one-way road toward
More informationNumerical modeling of dam-reservoir interaction seismic response using the Hybrid Frequency Time Domain (HFTD) method
Numerical modeling of dam-reservoir interaction seismic response using the Hybrid Frequency Time Domain (HFTD) method Graduation Committee: Prof. Dr. A.V. Metrikine Dr. Ir. M.A.N. Hriks Dr. Ir. E.M. Lourens
More informationFAN group includes NAMVARAN UPSTREAM,
INTRODUCTION Reservoir Simulation FAN group includes NAMVARAN UPSTREAM, FOLOWRD Industrial Projects and Azmouneh Foulad Co. Which of these companies has their own responsibilities. NAMVARAN is active in
More informationFinite Element Formulation for Plates - Handout 3 -
Finite Element Formulation for Plates - Handout 3 - Dr Fehmi Cirak (fc286@) Completed Version Definitions A plate is a three dimensional solid body with one of the plate dimensions much smaller than the
More informationMATERIALS AND METHODS
REDISTRIBUTION OF LOAD OF INJURED LOWER CERVICAL SPINE UNDER AXIAL COMPRESSION USING FEM E. C. Teo 1 and H. W. Ng 1 1 School of Mechanical and Production Engineering, Nanyang Technological University,
More informationCOMPUTATIONAL ENGINEERING OF FINITE ELEMENT MODELLING FOR AUTOMOTIVE APPLICATION USING ABAQUS
International Journal of Advanced Research in Engineering and Technology (IJARET) Volume 7, Issue 2, March-April 2016, pp. 30 52, Article ID: IJARET_07_02_004 Available online at http://www.iaeme.com/ijaret/issues.asp?jtype=ijaret&vtype=7&itype=2
More informationPREDICTION OF MACHINE TOOL SPINDLE S DYNAMICS BASED ON A THERMO-MECHANICAL MODEL
PREDICTION OF MACHINE TOOL SPINDLE S DYNAMICS BASED ON A THERMO-MECHANICAL MODEL P. Kolar, T. Holkup Research Center for Manufacturing Technology, Faculty of Mechanical Engineering, CTU in Prague, Czech
More informationModeling of inflatable dams partially filled with fluid and gas considering large deformations and stability
Institute of Mechanics Modeling of inflatable dams partially filled with fluid and gas considering large deformations and stability October 2009 Anne Maurer Marc Hassler Karl Schweizerhof Institute of
More informationList of Problems Solved Introduction p. 1 Concept p. 1 Nodes p. 3 Elements p. 4 Direct Approach p. 5 Linear Spring p. 5 Heat Flow p.
Preface p. v List of Problems Solved p. xiii Introduction p. 1 Concept p. 1 Nodes p. 3 Elements p. 4 Direct Approach p. 5 Linear Spring p. 5 Heat Flow p. 6 Assembly of the Global System of Equations p.
More informationA quasi three-dimensional variably saturated groundwater flow model for climate modeling
A quasi three-dimensional variabl saturated groundwater flow model for climate modeling Zhenghui Xie Zhenhua Di Zhendong LuoQian Ma LASG Institute of Atmospheric Phsics Chinese Academ of Sciences China
More information1.054/1.541 Mechanics and Design of Concrete Structures (3-0-9) Outline 1 Introduction / Design Criteria for Reinforced Concrete Structures
Prof. Oral Buyukozturk Massachusetts Institute of Technology Outline 1 1.054/1.541 Mechanics and Design of Concrete Structures (3-0-9) Outline 1 Introduction / Design Criteria for Reinforced Concrete Structures
More informationMotor-CAD Software for Thermal Analysis of Electrical Motors - Links to Electromagnetic and Drive Simulation Models
Motor-CAD Software for Thermal Analysis of Electrical Motors - Links to Electromagnetic and Drive Simulation Models Dave Staton, Douglas Hawkins and Mircea Popescu Motor Design Ltd., Ellesmere, Shropshire,
More informationCylinder Head Gasket Contact Pressure Simulation for a Hermetic Compressor
Purdue University Purdue e-pubs International Compressor Engineering Conference School of Mechanical Engineering 2006 Cylinder Head Gasket Contact Pressure Simulation for a Hermetic Compressor Pavan P.
More informationWissenschaftliche Artikel (erschienen bzw. angenommen)
Schriftenverzeichnis I. Monographie [1] Convex variational problems. Linear, nearly linear and anisotropic growth conditions. Lecture Notes in Mathematics 1818, Springer, Berlin-Heidelberg- New York, 2003.
More informationA study on the causes of troubles in shield tunneling site with numerical analysis
A study on the causes of troubles in shield tunneling site with numerical analysis 1 B.K. Rho, 2 S.Y. Choo, 2 M.K. Song Korea Rail Network Authority, Daejeon, Korea 1 ; Danwoo E&C Co., Ltd., Sungnam, Korea
More informationHigh-end FEA pre/postprocessor
Advanced FEM: High-end FEA pre/postprocessor NX CAE Benefits Speed analysis modeling processes by up to 70 percent Increase product quality by rapidly simulating design trade-off studies Lower overall
More informationdu u U 0 U dy y b 0 b
BASIC CONCEPTS/DEFINITIONS OF FLUID MECHANICS (by Marios M. Fyrillas) 1. Density (πυκνότητα) Symbol: 3 Units of measure: kg / m Equation: m ( m mass, V volume) V. Pressure (πίεση) Alternative definition:
More informationLaboratory scale electrical resistivity measurements to monitor the heat propagation within porous media for low enthalpy geothermal applications
32 CONVEGNO NAZIONALE 19-21 Novembre 2013 TRIESTE Laboratory scale electrical resistivity measurements to monitor the heat propagation within porous media for low enthalpy geothermal applications N. Giordano
More informationChapter 5 MASS, BERNOULLI AND ENERGY EQUATIONS
Fluid Mechanics: Fundamentals and Applications, 2nd Edition Yunus A. Cengel, John M. Cimbala McGraw-Hill, 2010 Chapter 5 MASS, BERNOULLI AND ENERGY EQUATIONS Lecture slides by Hasan Hacışevki Copyright
More informationBS PROGRAM IN PETROLEUM ENGINEERING (VERSION 2010) Course Descriptions
BS PROGRAM IN PETROLEUM ENGINEERING (VERSION 2010) Course Descriptions PETE201 Introduction to Petroleum Engineering (Core) (1-0-1) The course's main goal is to provide the student with an overview of
More informationIntroduction to Engineering System Dynamics
CHAPTER 0 Introduction to Engineering System Dynamics 0.1 INTRODUCTION The objective of an engineering analysis of a dynamic system is prediction of its behaviour or performance. Real dynamic systems are
More informationJSME: Utilizing Our Knowledge and Wisdom in Working with the Society
JSME NEWS Message from the President Inaugural Address of the 91st President JSME: Utilizing Our Knowledge and Wisdom in Working with the Society Akira Yabe Continued from page 1
More informationEffect Of Piled Raft Design On High-Rise Building Considering Soil Structure Interaction
Effect Of Piled Raft Design On High-Rise Building Considering Soil Structure Interaction R. R. Chaudhari, Dr K. N. Kadam Abstract: Piled-raft foundations for important high-rise buildings have proved to
More informationCustomer Training Material. Lecture 2. Introduction to. Methodology ANSYS FLUENT. ANSYS, Inc. Proprietary 2010 ANSYS, Inc. All rights reserved.
Lecture 2 Introduction to CFD Methodology Introduction to ANSYS FLUENT L2-1 What is CFD? Computational Fluid Dynamics (CFD) is the science of predicting fluid flow, heat and mass transfer, chemical reactions,
More informationCFD Application on Food Industry; Energy Saving on the Bread Oven
Middle-East Journal of Scientific Research 13 (8): 1095-1100, 2013 ISSN 1990-9233 IDOSI Publications, 2013 DOI: 10.5829/idosi.mejsr.2013.13.8.548 CFD Application on Food Industry; Energy Saving on the
More informationFeature Commercial codes In-house codes
A simple finite element solver for thermo-mechanical problems Keywords: Scilab, Open source software, thermo-elasticity Introduction In this paper we would like to show how it is possible to develop a
More informationIntroducing. International Simulation Engineer
Introducing International Simulation Engineer The ISE (International Simulation Engineer) qualification allows engineers and analysts within the international simulation community to demonstrate and record
More informationSOLUTION OF DAM-FLUID INTERACTION USING ADAD-IZIIS SOFTWARE
SOLUTION OF DAM-FLUID INTERACTION USING ADAD-IZIIS SOFTWARE Prof. dr. Violeta Mircevska 1, dr. Simon Schnabl, Prof. dr. Mihail Garevski 3, dr. Ivana Bulajić 4 1Institute of Earthquake Engineering and Engineering
More informationMETHODS FOR ACHIEVEMENT UNIFORM STRESSES DISTRIBUTION UNDER THE FOUNDATION
International Journal of Civil Engineering and Technology (IJCIET) Volume 7, Issue 2, March-April 2016, pp. 45-66, Article ID: IJCIET_07_02_004 Available online at http://www.iaeme.com/ijciet/issues.asp?jtype=ijciet&vtype=7&itype=2
More informationFundamentals of Fluid Mechanics
Sixth Edition. Fundamentals of Fluid Mechanics International Student Version BRUCE R. MUNSON DONALD F. YOUNG Department of Aerospace Engineering and Engineering Mechanics THEODORE H. OKIISHI Department
More informationCo-Simulation and modal reduction for multifield problems in multibody dynamics
Co-Simulation and modal reduction for multifield problems in multibody dynamics 7th Workshop on Descriptor Systems March 2005, Paderborn Martin Arnold [martin.arnold@mathematik.uni-halle.de] Martin Luther
More informationMSC Solutions for Medical Device Industry Simulation Methods for Reducing Risk and Accelerating Innovation
MSC Solutions for Medical Device Industry Simulation Methods for Reducing Risk and Accelerating Innovation MSC Software Medical Device Industry Delivering Certainty by Helping You Simulate Real World Behaviors
More informationDistance Learning Program
Distance Learning Program Leading To Master of Engineering or Master of Science In Mechanical Engineering Typical Course Presentation Format Program Description Clarkson University currently offers a Distance
More informationWORLD CLASS COMPOSITE ENGINEERING THROUGH COMPETENCE, EXPERIENCE AND INNOVATION
WORLD CLASS COMPOSITE ENGINEERING THROUGH COMPETENCE, EXPERIENCE AND INNOVATION THROUGH COMPETENCE, EXPERIENCE AND INNOVATION Unlimited Possibilities Composites Consulting Group (CCG), an independent division
More informationCompatibility and Accuracy of Mesh Generation in HyperMesh and CFD Simulation with Acusolve for Torque Converter
Compatibility and Accuracy of Mesh Genen in HyperMesh and CFD Simulation with Acusolve for Converter Kathiresan M CFD Engineer Valeo India Private Limited Block - A, 4th Floor, TECCI Park, No. 176 Rajiv
More informationGiorgio Bornia. Research statement. Primary interests
Giorgio Bornia Research statement 2500 Broadway and Boston 79409-1042 Lubbock, TX +1 806 834 8754 +1 806 742 1112 giorgio.bornia@ttu.edu http://www.math.ttu.edu/~gbornia Primary interests My main research
More informationCourse in. Nonlinear FEM
Course in Introduction Outline Lecture 1 Introduction Lecture 2 Geometric nonlinearity Lecture 3 Material nonlinearity Lecture 4 Material nonlinearity continued Lecture 5 Geometric nonlinearity revisited
More informationDesigning Pavement Drainage Systems: The MnDRAIN Software
2003-17 Final Report Designing Pavement Drainage Systems: The MnDRAIN Software Technical Report Documentation Page 1. Report No. 2. 3. Recipients Accession No. MN/RC - 2003-17 4. Title and Subtitle 5.
More informationCivil Engineering Graduate Studies at Colorado School of Mines
Message from Dr. Terry Parker, Engineering Division Director Engineering has historically been a field that applies scientific knowledge to the needs of society by producing technological devices and systems.
More information1 Continuum versus Discrete Models
1 1 Continuum versus Discrete Models Introduction Flow and transport phenomena in porous media and fractured rock as well as industrial synthetic porous matrices arise in many diverse fields of science
More informationGraduate Courses in Mechanical Engineering
Graduate Courses in Mechanical Engineering MEEG 501 ADVANCED MECHANICAL ENGINEERING ANALYSIS An advanced, unified approach to the solution of mechanical engineering problems, with emphasis on the formulation
More informationDesign & Drafting Services
Design & Drafting Services 1. Mechanical CAD Services 1. Mechanical CAD Services Mechanical Design Services: Custom machine design Packaging machine design Mechanism design Machine tool design Material
More informationJob scheduling of parametric computational mechanics studies on Cloud Computing infrastructures
HPC-Cetraro 2012 1/29 Job scheduling of parametric computational mechanics studies on Cloud Computing infrastructures Carlos García Garino Cristian Mateos Elina Pacini HPC 2012 High Perfomance Computing,
More informationHow To Calculate Tunnel Longitudinal Structure
Calculation and Analysis of Tunnel Longitudinal Structure under Effect of Uneven Settlement of Weak Layer 1,2 Li Zhong, 2Chen Si-yang, 3Yan Pei-wu, 1Zhu Yan-peng School of Civil Engineering, Lanzhou University
More informationFUNDAMENTAL FINITE ELEMENT ANALYSIS AND APPLICATIONS
FUNDAMENTAL FINITE ELEMENT ANALYSIS AND APPLICATIONS With Mathematica and MATLAB Computations M. ASGHAR BHATTI WILEY JOHN WILEY & SONS, INC. CONTENTS OF THE BOOK WEB SITE PREFACE xi xiii 1 FINITE ELEMENT
More informationCONTRIBUTION TO THE IAEA SOIL-STRUCTURE INTERACTION KARISMA BENCHMARK
CONTRIBUTION TO THE IAEA SOIL-STRUCTURE INTERACTION KARISMA BENCHMARK Presented by F. Wang (CEA, France), CLUB CAST3M 2013 28/11/2013 5 DÉCEMBRE 2013 CEA 10 AVRIL 2012 PAGE 1 CONTRIBUTION TO THE IAEA SSI
More informationCFD SIMULATION OF SDHW STORAGE TANK WITH AND WITHOUT HEATER
International Journal of Advancements in Research & Technology, Volume 1, Issue2, July-2012 1 CFD SIMULATION OF SDHW STORAGE TANK WITH AND WITHOUT HEATER ABSTRACT (1) Mr. Mainak Bhaumik M.E. (Thermal Engg.)
More informationAutomatic mesh update with the solid-extension mesh moving technique
Comput. Methods Appl. Mech. Engrg. 193 (2004) 2019 2032 www.elsevier.com/locate/cma Automatic mesh update with the solid-extension mesh moving technique Keith Stein a, *, Tayfun E. Tezduyar b, Richard
More informationBasin simulation for complex geological settings
Énergies renouvelables Production éco-responsable Transports innovants Procédés éco-efficients Ressources durables Basin simulation for complex geological settings Towards a realistic modeling P. Havé*,
More informationVista: A Multi-field Object Oriented CFD-package
Vista: A Multi-field Object Oriented CFD-package T. Kvamsdal 1, R. Holdahl 1 and P. Böhm 2 1 SINTEF ICT, Applied Mathematics, Norway 2 inutech GmbH, Germany Outline inutech & SINTEF VISTA a CFD Solver
More informationHow To Calculate Energy From Water
A bi-projection method for Bingham type flows Laurent Chupin, Thierry Dubois Laboratoire de Mathématiques Université Blaise Pascal, Clermont-Ferrand Ecoulements Gravitaires et RIsques Naturels Juin 2015
More informationCFD simulation of fibre material transport in a PWR core under loss of coolant conditions
CFD simulation of fibre material transport in a PWR core under loss of coolant conditions T. Höhne, A. Grahn, S. Kliem Forschungszentrum Dresden- Rossendorf (FZD) Institut für Sicherheitsforschung Postfach
More information* haoranbasketball@gmail.com
Numerical Simulation of Gas Migration Rules and Comparison between U shape and U+L shape Ventilation System Haoran Zhang (a)*, Lluis Sanmiquel Pera (a), Yaojiang Zhao (b), Vintro Sanchez Carla (a) and
More informationPeriod #16: Soil Compressibility and Consolidation (II)
Period #16: Soil Compressibility and Consolidation (II) A. Review and Motivation (1) Review: In most soils, changes in total volume are associated with reductions in void volume. The volume change of the
More informationINTRODUCTION TO FLUID MECHANICS
INTRODUCTION TO FLUID MECHANICS SIXTH EDITION ROBERT W. FOX Purdue University ALAN T. MCDONALD Purdue University PHILIP J. PRITCHARD Manhattan College JOHN WILEY & SONS, INC. CONTENTS CHAPTER 1 INTRODUCTION
More informationHEAT TRANSFER ANALYSIS IN A 3D SQUARE CHANNEL LAMINAR FLOW WITH USING BAFFLES 1 Vikram Bishnoi
HEAT TRANSFER ANALYSIS IN A 3D SQUARE CHANNEL LAMINAR FLOW WITH USING BAFFLES 1 Vikram Bishnoi 2 Rajesh Dudi 1 Scholar and 2 Assistant Professor,Department of Mechanical Engineering, OITM, Hisar (Haryana)
More informationOpto-Mechanical I/F for ANSYS
Abstract Opto-Mechanical I/F for ANSYS Victor Genberg, Keith Doyle, Gregory Michels Sigmadyne, Inc., 803 West Ave, Rochester, NY 14611 genberg@sigmadyne.com Thermal and structural output from ANSYS is
More informationDimensional analysis is a method for reducing the number and complexity of experimental variables that affect a given physical phenomena.
Dimensional Analysis and Similarity Dimensional analysis is very useful for planning, presentation, and interpretation of experimental data. As discussed previously, most practical fluid mechanics problems
More informationLarge deformation analysis of cone penetration testing in undrained clay
Installation Effects in Geotechnical Engineering Hicks et al. (eds) 13 Taylor & Francis Group, London, ISBN 978-1-138-41-4 Large deformation analysis of cone penetration testing in undrained clay L. Beuth
More information