Release 1. UEG20114 Certificate II in Gas Supply Industry Operations

Transcription

1 Release 1 UEG20114 Certificate II in Gas Supply Industry Operations

2 UEG20114 Certificate II in Gas Supply Industry Operations Modification History Description Scope This qualification provides competencies for entry level gas supply industry activities in transmission, distribution pipeline and cylinder operations and functions as outline below: Distribution pipeline activities include laying distribution infrastructure (including pipes), developing gas pipeline infrastructure and reading gas meters in industrial, commercial and rural environments, on pipelines, associated facilities and equipment; and control centres. Transmission pipeline activities include right of way preparation, rigging operations, hydrotesting, laying pipelines, operating transmission pipeline construction plant and equipment and conducting minor mechanical maintenance. Gas cylinder operations for domestic and industrial supply of gaseous fuels include checking, testing, maintaining and filling of gaseous fuel cylinders and the storage, handling, loading, transportation and distribution of cylinders in accordance with the relevant ustralian Standards and regulatory requirements This entry level qualification is at ustralia Qualification Framework (QF) level 2 and provides the required knowledge and skills for defined work activities to be carried out under close supervision Pathways Information Licensing/Regulatory Information Entry Requirements Employability Skills Summary pproved Page 2 of 8 Commonwealth of ustralia, 2014 E-Oz Training Standards

3 Packaging Rules Completion requirements The requirements for granting this qualification will be met when competency is demonstrated and achieved for: ll the Core competency standard units to achieve a total weighting of 120 points, defined in the Core Competency Standard Units table below and combination of Elective competency standard units to achieve a total weighting of 2 points in accordance with the Elective Competency Standard Units tables below, resulting in the achievement of overall weighting of 360 points. ll the required pre-requisite competency standard units have been met as required. Core Competency Standard Units ll Core competency standard units to be achieved Weighting Points UEGNSG005 Prepare to work in the gas industry 20 UEGNSG132 UEGNSG1 UEGNSG141 Carry out basic work activities in a gas industry work environment pply environmental policies and procedures in the utilities industry pply Workplace Health and Safety regulations, codes and practices in the gas supply industry Total points in core 120 Elective Competency Standard Units Complete Elective units to achieve a total of weighting of 2 points from the following groups: Group Minimum points Maximum points Imported and Common Elective Units Imported units from other qualifications, training packages and/or state accredited courses can be added to this group, but they must be at QF level 2. If units have not being assigned a weighting by the relevant E-Oz Industry Technical dvisory Committee, their weighting will be 10 points. Note: For further information see pplication of the NQC Flexibility Formula, refer to UEG11 Gas Industry Training Package, Version 2, Qualification Framework 0 60 pproved Page 3 of 8 Commonwealth of ustralia, 2014 E-Oz Training Standards

4 B Qualification QF 2 Electives You may select all elective units from this Group Group Imported and Common Elective Units You may complete units to maximum weighting of 60 points Weighting Points CPCCLDG300 1 CPCCLRG3001 CPCCOHS1001 Licence to perform dogging Licence to perform rigging basic level Work safely in the construction industry CPPFES2005 Demonstrate first attack firefighting equipment 15 HLTID001 Provide cardiopulmonary resuscitation 10 HLTID003 Provide first aid 10 HLTID005 Provide first aid in remote situations 10 HLTHSE204D Follow safe manual handling practices 20 MEM05004C Perform routine oxy acetylene welding 20 MEM05012C Perform routine manual metal arc welding 20 MSPMOHS1 10 MSPMOHS2 05 MSPMOHS2 16 MSPMOHS2 17 MSPMPER20 0C Follow emergency response procedures 20 Control minor incidents 30 Operate breathing apparatus 20 Gas test atmospheres 30 Work in accordance with an issued permit 20 MSPMPER20 Monitor and control work permits 20 pproved Page 4 of 8 Commonwealth of ustralia, 2014 E-Oz Training Standards

5 1 MSPMPER20 2 MSPMSUP21 0 MSPMSUP24 0 Observe permit work 20 Process and record information 30 Undertake minor maintenance 30 MSS2061 Use SCD systems in operations 30 PMOHS211B Prepare equipment for emergency response 20 PMOMIR210 B Control evacuation to muster point 20 RIICCM205D Carry out manual excavation 10 RIICCM206D Support plant operations 10 RIICCM207D Spread and compact materials manually 10 RIICCM208D Carry out basic levelling 10 RIICCM210D Install trench support 15 RIICRC208D Lay pipes RIIMPO308D Conduct tracked dozer operations RIIMPO318D Conduct civil construction skid steer loader operations 70 RIIWHS202D Enter and work in confined spaces 30 RIIWHS204D Work safely at heights 20 RIIWHS205D Control traffic with stop-slow bat 10 RIISM201D Handle resources and infrastructure materials and safely dispose of non-toxic materials 15 RIIWMG203D Drain and dewater civil construction site 20 TLIB2004 Carry out vehicle inspection 20 TLIC2002 Drive light rigid vehicle TLIC2025 Operate four wheel drive vehicle pproved Page 5 of 8 Commonwealth of ustralia, 2014 E-Oz Training Standards

6 TLIC3003 Drive medium rigid vehicle TLIC3004 Drive heavy rigid vehicle TLIC3005 Drive heavy combination vehicle TLID2003 Handle dangerous goods/hazardous substances TLID2010 Operate a forklift TLID2016 Load and unload explosives and dangerous goods 30 TLID3033 Operate a vehicle-mounted loading crane TLIF2006 pply accident-emergency procedures 20 TLIF2010 pply Fatigue Management Strategies 30 TLIF2012 TLILIC0012 pply safe procedures when handling/transporting dangerous goods or explosives Licence to operate a vehicle loading crane (capacity 10 metre tonnes and above) 30 TLILIC2001 Licence to operate a forklift truck TLILIC2014B Licence to drive a light rigid vehicle TLILIC2015B Licence to drive a medium rigid vehicle TLILIC2016B Licence to drive a heavy rigid vehicle 50 TLILIC3017B Licence to drive a heavy combination vehicle 60 UEENEEC001 B UEENEED101 Maintain documentation Use computer applications relevant to a workplace Imported units from other qualifications, training packages and/or state accredited courses can be added to this group, but they must be at QF level 2. If units have not being assigned a weighting by the relevant E-Oz Industry Technical dvisory Committee, their weighting will be 10 points. Note: For further information see pplication of the NQC Flexibility Formula, refer to Page 10, UEG11 Gas Industry Training Package, Version 2, Qualification Framework Up to 60 points pproved Page 6 of 8 Commonwealth of ustralia, 2014 E-Oz Training Standards

7 Group B Qualification QF 2 Electives t least 180 points to be achieved from this group. You may select all your elective units from this Group. Weighting Points UEENEEE102 Fabricate, assemble and dismantle utilities industry components UEENEEE107 Use drawings, diagrams, schedules, standards, codes and specifications UEENEEM080 Report on the integrity of explosion-protected equipment in a hazardous area 20 UEGNSG004 Locate, prove and protect utility assets 60 UEGNSG006 Use a portable gas detector to locate escape UEGNSG134 Establish a utilities infrastructure work site 60 UEGNSG136 Carry out transmission pipeline construction work activities 60 UEGNSG219 Conduct excavations in the utilities industry 60 UEGNSG221 First on site response to gas pipeline emergencies 90 UEGNSG224 UEGNSG226 UEGNSG227 Construct and lay copper and stainless steel gas distribution pipelines ssist with the construction, laying and connection of gas distribution services to mains ssist with the construction and laying of gas distribution mains 60 UEGNSG330 Coat metallic pipelines 80 UEGNSG331 Establish right of way access for transmission pipeline construction 60 UEGNSG332 Undertake hydro-testing for transmission pipeline construction 60 UEGNSG333 Work in proximity of transmission pipeline construction plant and equipment UEGNSG342 Maintain pipeline easements pproved Page 7 of 8 Commonwealth of ustralia, 2014 E-Oz Training Standards

8 UEGNSG615 Fill LPG cylinders 80 UEGNSG616 Refurbish gas cylinders 80 UEGNSG705 Disconnect and reconnect small capacity gas meters UEGNSG708 UEGNSG711 Pressure Test Residential and Small Commercial Gas Installations Process meter reading information using appropriate technology UEGNSG712 Read and record meter readings UEGNSG714 Relight Type gas appliances 60 UEGNSG804 Maintain Single Stage and Single Run Gas Flow and Pressure Control and Measuring Devices 80 UEPOPS203B Operate and monitor communications system 20 UEPOPS205B Conduct minor mechanical maintenance 30 UETTDREL14 Working safely near live electrical apparatus as a non-electrical worker Note: 1. Prerequisite pathways shall be identified and met for all elective units selected. 2. In selecting elective units considerations to career planning advice should be given to units that form part of a prerequisite pathway for the progression to achieve particular competencies or qualification at a higher level. END OF QULIFICTION Custom Content Section pproved Page 8 of 8 Commonwealth of ustralia, 2014 E-Oz Training Standards