Safe and Reliable Network Connectivity Engineered for Hazardous Oil & Gas Locations

Transcription

1 Safe and Reliable Network Connectivity Engineered for Hazardous Oil & Gas Locations Safety Class I Div., ATEX Zone, IECEx, maritime approval Availability Unrivaled network redundancy solutions Reliability Industrial-grade design with wide temperature operation Durability Conformal coating, high MTBF, 5-year warranty Manageability Topology visualization, auto configuration, SCADA integration, easy troubleshooting

2 Maximizing Synergy between Industrial Automation and Ethernet Networks for the Oil and Gas Industry Oil and gas are still indispensible fuels for the global economy, and exploring for new sources of oil and gas remains a lucrative and attractive endeavor. New oil platforms, rigs, and pipelines are constantly being constructed to meet the demand for oil, with a corresponding growth in the number of factories and control centers used to process and manage crude oil. To maximize efficiency and safety, these systems are becoming more integrated, but unfortunately, the traditional SCADA systems used by the oil and gas industry are difficult to integrate because they are highly independent and have limited connectivity to other systems. This limitation will need to be overcome as oil facilities grow more complex, and safety and reliability grow ever more important. Moxa s complete range of industrial networking, monitoring, and computing products are engineered for harsh mission-critical environments, and provide the reliability, flexibility, and safety needed to maintain and operate oil and gas facilities. Achieve Operational Excellence Through: Improved Flexibility Ethernet technology greatly expands data transmission boundaries, allowing data to be accessed from anywhere to achieve live monitoring of remote sites and realtime response to emergencies. Ethernet significantly enhances the flexibility and availability of data for SCADA systems as well as their suitability for being integrated with other networking devices, which is why it is a highly cost-effective and efficient technology. Moxa provides a wide array of industrialgrade products, including industrial Ethernet switches, fiber media converters, industrial secure routers, industrial wireless Ethernet products, industrial Ethernet gateways, serial device servers, RTU controllers and remote I/O devices, IP cameras, and industrial computing solutions. A variety of interface solutions such as fiber, copper, SFP, PoE, wireless, and serial, and bandwidth options from 0/00 Mbps to 0 Gbps, are available for your applications. Added Safety Safety is a top priority of the oil and gas industry, so on-site and off-site equipment must all be held to the highest standards. Devices must meet many different safety standards to ensure they can resist damage from corrosion and vibration, and to ensure continuous, reliable operation in hazardous environments. Moxa s products have passed a variety of certifications specially developed for oil and gas facilities, including UL/cUL CD, ATEX Zone, IECEx, and DNV/ABS/LR/NK/GL. Apart from environmental approvals, Moxa s high performance industrial secure routers enable secure VPN network access and critical device protection from unauthorized remote connections. In addition, Moxa s wired and wireless Ethernet products support a number of security standards, including 80.X, HTTPS, and SSL. Increased Availability Unexpected system downtime and failure to respond in real time can cause significant damage to oil and gas facilities, threatening assets and even lives. For this reason, it is highly important to keep systems functional at all times, even during emergency situations. Moxa s industrial Ethernet switches and wireless AP/bridge/client products support redundancy features to ensure that communication systems are always available and can respond in real time. With Turbo Ring and Turbo Chain (recovery time < 0 ms), and dual radio and Turbo Roaming for redundancy, Moxa products ensure maximum LAN and wireless LAN network uptime and guarantee millisecond-level recovery. Moxa s products also support dual, redundant power inputs, helping ensure system availability. Comprehensive Coverage of Industrial Networking, Monitoring, and Computing Solutions Industrial Ethernet Industrial Wireless Industrial Ethernet Switches Industrial Media Converters Industrial Secure Routers Industrial Network Management Software Industrial Ethernet Gateways Industrial Wireless AP/Bridge/Clients Industrial Cellular IP Gateways

3 Offshore Onshore Pump Stations Pipelines Oil Refining Enhanced Reliability A rugged design is essential for equipment used in oil and gas facilities since the environments in such facilities are extremely harsh. For this reason, the ability to withstand extreme weather conditions, temperature changes, vibration, and external damage such as chemical corrosion is a must. Many Moxa products have an IP0/5/66/67/68 robust metal housing, wide temperature tolerance, vibration proofing, and optional conformal coating for erosion resistance, making them suitable for tough industrial environments. They also have other heavy-duty industrial-grade features, including relay output warnings, a higher MTBF, high EMC resistance, and EMI noise immunity. Easier Management Managing large-scale and geographically distributed oil and gas facilities is extremely difficult. In addition, to achieve the highest level of security in these types of unmanned sites, operators must be able to monitor and control remote sites anytime, and from anywhere. Moxa provides a number of easy-to-use software solutions for real-time remote network management: MXview industrial network management software; MGate manager; Active OPC server and DA-Center remote automation software; SoftNVR-IA IP surveillance software; RCore ready-to-run computing software. In addition, many of Moxa s software solutions work seamlessly with industrial systems by supporting OPC server functionality for communicating directly with SCADA systems and HMIs, and Moxa s Modbus TCP, PROFINET, and EtherNet/IP compatible network devices can be monitored directly by SCADA systems and HMIs for real-time network monitoring. Serial Connectivity Remote Automation IP Surveillance Industrial Computing Serial-to-Ethernet Device Servers RTU Controllers and Remote I/O Devices IP Video Surveillance Solutions Panel Computers Embedded Computers

4 Application Solutions Upstream: Offshore Production Optimizing Network Communication for Offshore Oil Drilling Control Systems Oil & gas communications networks are mission critical, but often must be deployed at offshore oil fields in an environment with severe hazards and challenges. To successfully monitor a drilling platform remotely, the entire infrastructure needs to be extremely reliable and available. In addition to redundant wired or wireless network systems with failover capability, the network equipment must comply with industrial standards that certify its ability to operate in an environment with varying temperatures, corrosion, and vibration. A scalable, high-performance 0GbE industrial Ethernet backbone to support SCADA, DCS, ESD, F&G control, and safeguarding systems for integrated remote control and monitoring in real time, to increase the safety of each platform. Continuous data acquisition and IP surveillance monitoring for the process control system through highly reliable and costeffective Ethernet LAN and WLAN connectivity from the oil platform to onshore operation center. A high level of network redundancy to maximize availability. Highly reliable network equipment that can withstand harsh marine conditions and provide many years of trouble-free operation. Flexible, reliable wireless communication such as IEEE 80.a/b/g technology between vessels, floating rigs, and fixed platform rigs, to deliver greater availability at lower deployment costs. Moxa Solutions Moxa offers highly secure, robust, and available network solutions tailored for offshore data collection, including a full suite of industrial L/L Ethernet switches, industrial wireless Ethernet products, industrial secure routers, zone panel PCs, embedded computers, IP video products, RTU controllers and remote I/O devices, and serial-to-ethernet device servers. For maximum connection flexibility, Moxa s industrial Ethernet switches support 0/00 Mbps, Gbps, and 0 Gbps speeds with modules available with copper, fiber, and SFP ports. Moxa s Turbo Ring and Turbo Chain redundant technologies enable an integrated, hassle-free network with 0 ms fast recovery for both control and field networks. Moxa products support an extended operating temperature range, robust housing, fanless operation, long-distance and EMI-immune fiber connections, surge protection, and redundant power inputs to guarantee top performance over a long lifetime. Many of Moxa s products have achieved UL/cUL Class I Division, ATEX Zone, IECEx, and DNV/GL/ABS/LR/ NK certification for use in marine settings or hazardous environments containing volatile flammable liquids and gases. Moxa s wireless Ethernet solutions have become the infrastructure of choice for offshore oil & gas applications due to their rugged industrial design, advances in security protection, and innovative dual-radio Turbo Roaming technology that optimizes bandwidth and redundancy. Highlighted Products The Host Platform EDR-G90 ICS-G788 EDS-50A AWK-6 Industrial Gigabit VPN/Firewall/NAT Secure Router Gigabit combo RJ5/SFP port for WAN, LAN, and user-configurable WAN/DMZ interface Dual WANs for reliable connection redundancy or load sharing Easy-to-use firewall setting functionality G+ 0GbE-port Layer Full Gigabit Ethernet Switch Layer routing interconnects multiple LAN segments Turbo Ring and Turbo Chain (recovery time < 0 ms) for Ethernet redundancy Isolated redundant power with universal 0/0 VAC power inputs 7+G-port Gigabit Managed Ethernet Switch Gigabit ports for redundant ring and Gigabit port for uplink Long distance fiber transmission of up to 0 km 0 IEEE 80.a/b/g Outdoor Dual-Radio Wireless AP/Bridge/Client Zero packet loss via concurrent dual-radio redundancy Millisecond-level Turbo Roaming Long-distance data transfer up to 0 km Dual DC power inputs and PoE for easy deployment

5 EXPC-9 Fanless Rugged Zone Panel Computer Readable in sunlight with000nit brightness Fanless design with a wide -0 to 60 C or -0 to 60 C (with heater) operating temperature range Self-diagnostic software enhancements improve reliability and predictability EXC-0-T* Fanless Rugged Zone DIN-Rail Computer Built-in VPN/firewall features Self-diagnostic software enhancements improve reliability and predictability -5 to 70 C operating temperature range *Order by request VPort 6-MP Rugged HD Box-Type H.6 IP Camera -0 to 75 C operating temperature without heater or cooling fan 80 x 70 resolution with DNR/BLC/WDR Up to independent video streams ( x H.6, x MJPEG) iopac 55* RTU Controller with 8 DIs, 8 DIOs, and 8 AIs Supports C/C++ or IEC 6- programming languages Supports DNP (outstation) protocol Robust and compact design for harsh environments *Available in Q, 0 iologik E60 Ethernet Micro RTU Controller with 6 RTDs and DOs Easy-to-use Click&Go logic for local control SNMPv/vc/v protocols supported Smart alarm management with , SNMP Trap, TCP, and UDP Floating Rigs and Carrier Monitoring 0 EDS-08A EDS-P506A- PoE AWK- VPort 6 VPort 5 5 NPort IA5000A 8-port Managed Ethernet Switch 6-port PoE+ Managed Ethernet Switch Turbo Ring and Turbo Chain (recovery time < 0 ms) for Ethernet redundancy IPv6, Modbus/TCP, EtherNet/IP, PROFINET, LLDP, SNMP inform, IGMP, QoS, and VLAN Advanced PoE management functions (EDS-P506A-PoE) IEEE 80.a/b/g Outdoor Single Radio Wireless AP/Bridge/Client Multi-SSID,VLAN, QoS support Millisecond-level Turbo Roaming Long-distance data transfer up to 0 km IP68-rated metal housing, dual DC power, and PoE -ch H.6/MJPEG Video Encoder -ch MPEG/MJPEG Video Encoder Up to 0 FPS at full D (70x80) resolution Video latency under 00 ms (VPort 6) OnVIF supported for standardization and interoperability (VPort 6) Free VPort SDK PLUS supported //-port Industrial Serial Device Servers Triple surge protection (serial/power/ethernet) kv isolation for serial signals Redundant power inputs and -0 to 75 C operating temperature range Approved for ATEX and IECEx (pending) standards

6 Application Solutions Upstream: Onshore Production Reliable Network Monitoring Solutions for Drilling Rig and Wellhead Automation Intelligent oil rig and wellhead automation can be achieved with a reliable Ethernet control and monitoring system that supervises operations from the rigs, wellheads, or Gas Oil Separation Plant (GOSP) in a SCADA-based control center. This system combines field site drilling data transmission and acquisition and video monitoring, and requires a stronger backbone with non-stop redundant reliability and real-time performance. Since onshore operations face environmental hazards such as corrosion, temperature extremes, and risk of explosion, network equipment must be able to withstand hazardous environments and comply with ATEX standards. A reliable monitoring and control network system based on industrial Ethernet is required to remotely manage and immediately access data from the RTUs at the SCADA host, reducing the number of in-person maintenance trips. Direct data monitoring of many industrial fieldbus devices. High bandwidth Gigabit backbone for video, voice, and data transmission, with fast fault recovery in case the network goes down. Fiber optic cable for secure and long-distance transmission to the field monitoring site to deliver superior EMI/noise immunity and high availability. A secure network that protects the monitoring system and critical oil rigs and wellheads from malicious attack. A software solution that manages a large-scale onshore oil drilling system for easy network troubleshooting and maximum system uptime. ATEX and UL ratings to certify explosion-proofing, dustproofing, weatherproofing, and a wide operating temperature range to ensure safety and reliability in hazardous conditions. Moxa Solutions Moxa offers a variety of remote monitoring, maintenance, and data acquisition solutions for maximum customer flexibility, including Modbus, PROFINET, and EtherNet/IP gateways for efficient communication interoperability, fiber media converters, IP surveillance solutions, RTU controllers and I/O devices, high-performance panel PCs and embedded computers, and industrial wireless Ethernet products for mobile access of onsite maintenance. Moxa s high-performance Layer switches form reliable Gigabit fiber redundant rings across the GOSP LAN network and support Gigabit uplinks to the SCADA control center, enabling real-time video, voice, and data transmission. Turbo Ring and Turbo Chain self-healing technology (recovery time < 0 ms) with highly flexible and cost-efficient deployment for the highest level of network availability and hassle-free expansion. Gigabit secure router to form a trusted industrial network with the highest levels of protection. Network management software and OPC-enabled solutions allow engineers to stay in control of their Ethernet networks with easy and seamless integration with SCADA/HMI systems. In addition to Ul/cUL Class I Division, and ATEX Zone certifications, rugged features for greater system reliability include -0 to 75 C operating range, IP66/IP0 housing, and dual redundant power. Highlighted Products Drilling Control and Monitoring 5 MGate 50- PBM-MN ICF-80I EXPC-9 EXC-0-T EDS-08A -port PROFIBUS-to-Modbus TCP Gateway AutoScan technology for easy configuration Web-based GUI for I/O data visualization Redundant power inputs and relay output warning PROFIBUS-to-Fiber Converter Auto baudrate detection for easy configuration Fiber cable test function for easy maintenance Redundant ring for reliable network transmission Fanless Rugged Zone Panel Computer See item 5 on page Fanless Rugged Zone DIN-Rail Computer See item 6 on page 8-port Managed Ethernet Switch See item 0 on page Wellhead Monitoring and Maintenance 6 IKS-G G-port Layer Full Gigabit Managed Ethernet Switch Layer routing interconnects multiple LAN segments Up to optical fiber connections (SFP slots) Turbo Ring, Turbo Chain (recovery time < 0 ms) for Ethernet redundancy 6 5 5

7 EDS-P50A- 8PoE 8+G-port PoE+ Managed Ethernet Switch Up to 6 W per PoE+ port Gigabit RJ5/SFP combo ports kv LAN surge protection VPort 5 iopac 55 -channel MPEG/MJPEG Industrial Video Encoder See item on page RTU Controller with 8 DIs, 8 DIOs, and 8 AIs See item 8 on page 8 9 MGate MB70/ MB70 VPort 56-MP* 0 V0 AWK- /-port Serial-to-Ethernet Modbus Gateways Priority control for critical commands Serial redirector function provided Use ProCOM to implement control via COM port mapping Approved for ATEX, IECEx, and DNV standards Rugged 080P Day-n-Night Zoom IP Camera -5 to 75 C operating temperature without heater or cooling fan 90 x 80 resolution with D DNR and BLC 0x optical zoom and 6x digital zoom, up to 60x zoom ratio Up to independent video streams ( x H.6, x MJPEG) *Available in Q, 0 x86-based Embedded Computer Intel Atom Z50PT. GHz processor, 00 MHz FSB Front-end computing, storage, and communication Dual independent displays (VGA +LVDS) Palm-size form factor with -0 to 85 C operating temperature range IEEE 80.a/b/g Outdoor Single Radio Wireless AP/Bridge/Client See item on page SCADA Control Center EDR-G90/ G90 5 MXview 6 SoftNVR-IA 7 EDS-SNMP OPC Server Industrial VPN/Firewall/NAT Secure Routers High performance Gigabit copper/fiber combo port Up to 500 Mbps throughput Built-in PacketGuard for Modbus TCP packets Industrial Network Management Software Automatic topology, VLAN, and IGMP visualization Event playback for reviewable diagnostics OPC agent for SCADA and third party NMS Third party MIB support 6-channel IP Surveillance Software Live view with H.6, MPEG, and MJPEG, from VPort products Video recording and playback functions by event Built-in OPC server for easy communication with automation systems OPC Server Software Easy to create and edit the configuration of connected devices Easy to create and edit the MIB template for dedicated tag file of any SNMP device User-definable tag file 6

8 Application Solutions Midstream: Pump Station and Pipeline Monitoring Real-Time Monitoring of Oil Pipeline Systems The role of oil pipelines is to distribute the crude oil from drilling rigs to oil storage tanks and then to refineries. Typically, pipelines span several thousand miles over harsh terrain and require a central SCADA system based on Synchronous Digital Hierarchy (SDH) and microwave architecture to measure, monitor, and control the status of field instruments across the entire oil flow. Multiple pumping stations, such as block valve stations and compressor stations, keep the pressure in the pipeline constant. Operators can quickly detect, locate, and prevent or resolve leaks, damages, and breaks by deploying a rugged, extendable fiber-optic Ethernet network. The network must be robust, highly available, and include an integrated remote monitoring and surveillance service for pipeline operation to improve safety and reliability and reduce the total cost of the pipeline. The SCADA system and network management software at the control center receive and monitor the pipeline s operational status. A reliable wired or wireless communication network supports the pipeline-wide remote data monitoring system with IP cameras, Ethernet gateways, serial device servers, RTU controllers, and remote I/O devices, to seamlessly communicate with the central system. Network with Gigabit performance and fiber support for realtime long-haul video, voice, and data transmission over vast distances. Flexible and extensive network with easy deployment and expansion for large-scale and changeable pipeline applications. Industrial-grade devices meeting exacting standards, with an extended operating temperature range, and featuring a rugged construction to build a rock-solid network in harsh operating conditions. Moxa Solutions Moxa offers reliable connectivity, superior network efficiency and performance, and instant remote monitoring and access with our highly integrated network solutions, including industrial Ethernet switches, industrial wireless LAN and WAN products, industrial Ethernet gateways, fiber media converters, network management software, IP cameras, event-responsebased RTU controllers and remote I/O devices, embedded computers, and advanced serial device servers. Easily troubleshoot the entire network with Moxa s MXview industrial network management software to maximize system uptime. Industrial Ethernet switches with Gigabit performance and single-mode and multi-mode fiber optic interfaces are available. Turbo Chain, an ultra-flexible and highly resilient technology with fast fault recovery time under 0 ms and live node expansion capability without system interruptions, can be used to build a cost-efficient redundant network. Excellent long-term reliability is ensured by IECEx, ATEX, and UL approvals, structural strength, extended operating temperature, as well as corrosion and electromagnetic resistance. Highlighted Products Control Center IKS-678- GTXSFP AWK- MXveiw +G-port Modular Managed Ethernet Switch Up to -port GbE and -port FE uplink Turbo Ring and Turbo Chain (recovery time < 0 ms) for network redundancy Isolated redundant power inputs Fanless, -0 to 75 C operating temperature range IEEE 80.a/b/g Indoor Dual Radio Wireless AP/Bridge/Client Millisecond-level Turbo Roaming Long-distance data transfer up to 0 km Dual DC power inputs and PoE Industrial Network Management Software See item 5 on page 6 Pump Station and Pipeline Monitoring EDS G-port Compact Modular Managed Ethernet Switch Up to Gigabit ports for Gigabit redundant ring and uplink Modular form factor with up to fiber ports Turbo Chain and Turbo Ring (recovery time < 0 ms) seamlessly interoperate with SDH network 8 0 7

9 iologik E Ethernet Micro Controller with AIs and DIOs Smart alarm management with , SNMP trap, TCP, UDP I/O peer-to-peer function and SNMPv/vc/ v support Front-end intelligence supporting Click&Go rules 6 iologik E Ethernet Remote I/O with AIs, DIs, and DIOs Built-in -port Ethernet switch for daisychain topology Free support of Moxa s Active OPC Server for connecting to SCADA systems User-defined Modbus/TCP addressing UL/cUL Class I Div., ATEX Zone certification 7 iopac 55 RTU Controller with 8 DIs, 8 DIOs, and 8 AIs See item 8 on page 8 NPort IA5000A //-port Industrial Serial Device Servers See item 5 on page 9 0 MGate MB70/ MB70 /-port Serial-to-Ethernet Modbus Gateways Priority control for critical commands Serial redirector function provided Use ProCOM to implement control via COM port mapping Approved for ATEX, IECEx, and DNV standards VPort 6-MP Rugged HD Box-Type H.6 IP Camera -0 to 75 C operating temperature without heater or cooling fan 80 x 70 resolution with DNR/BLC/WDR Up to independent video streams ( x H.6, x MJPEG) VPort 56-MP Rugged 080P Day-and-Night Zoom IP Camera See item 9 on page 6 ICF-50 Industrial Serial-to-Fiber Media Converter -way communication: RS-, RS-/85, fiber Industrial approvals: UL 508, Class I Div. / ATEX Zone, and IECEx (pending) -0 to 85 C operating temperature range OnCell G0 Industrial Quad-Band GSM/GPRS/EDGE IP Gateway Connect Ethernet/serial devices over an integrated VPN Centralized private IP management software Redundant DC power inputs and DIN-rail mounting Tank Farm Management EDS-08A 5 IA 8-port DIN-Rail Managed Ethernet Switch Turbo Ring and Turbo Chain media redundancy (recovery time < 0 ms) IPv6, Modus/TCP, LLDP, SNMP Inform, QoS, port-based VLAN, SNMPv/vc/v, and RMON RISC-Based Embedded Computer Front-end communications for remote monitoring, data acquisition, data logging, and protocol conversion Supports serial ports, DIs, DOs, AIs, thermocouples, dual LANs, SD, Linux Modbus/TCP library to retrieve AI and thermocouple data 8

10 Application Solutions Downstream: Oil Refining and Petrochemical Operations Ensure /7 Sustainable Production with Industrial Ethernet Oil refineries are large-scale plants that process large quantities of crude oil and feature a complicated production process with a great number of intelligent equipment devices. Because of the high capacity, many of the units operate continuously for long periods of time. The distributed control system (DCS) is the main control system, and is connected to the controller elements by Ethernet networks to manage and monitor the plant s output and performance. Since non-stop /7 operation is crucial to the entire process, the Ethernet network system must have reliable redundancy to achieve high data availability and optimal productivity. In addition, a reliable and secure auxiliary system is used to detect and track unsafe events such as leaks to maintain safe operations. Build a highly reliable and flexible industrial Ethernet communication network for the entire DCS. Dual redundant network for SCADA system, controllers, and field devices to simplify the task of providing maximum uptime for the critical oil refinery DCS process. Fiber redundant ring networks over a vast area in the refinery plant to connect the field gas sensors, leak detectors, and other industrial detectors to the SCADA control room. IP video surveillance and remote automation solutions integrated with the network to enable remote monitoring and control of daily operations, especially for emergency situations. Cellular solutions to easily connect field devices at remote sites for mobile management. Enable secure network access and critical device protection. Moxa Solutions High performance full Gigabit Layer and Layer rackmount switches supporting up to 0GbE ports and up to fast Ethernet ports, and Turbo Ring / Turbo Chain redundant technology (recovery time < 0 ms) excel in building reliable redundant fiber optic connections for a heavy-load DCS process. Moxa offers a vast range of industrial Ethernet switches with DIN rail or rack mounting options and fiber support, including high-port-density rackmount switches that are a natural fit for control centers, Gigabit Ethernet switches for video surveillance applications, and PoE+ solutions for costeffectively connecting high power PoE-based sensors. Industrial IP cameras, video encoders, and event-based RTU controllers and remote I/O devices provide a valuable integrated service over one Ethernet platform for real-time data acquisition and surveillance monitoring. Comprehensive device networking solutions, such as cellular IP gateways, fieldbus-to-ethernet gateways, and Ethernet-tofiber media converters, and more. Moxa s industrial Gigabit performance secure routers create an encrypted VPN tunnel, and have built-in firewall functions that protect critical network devices from unauthorized access or broadcast packets. All of Moxa s solutions feature a wide temperature operating range, high MTBF, fanless operation, high-emi noise immunity, and industrial design to enable long-term operation. Highlighted Products Oil Refinery Process ICS-G788 IKS-G65 OnCell G50-HSPA MGate MB70/ MB70 G+ 0GbE-port Layer Full Gigabit Switch Layer routing interconnects multiple LAN segments Turbo Ring and Turbo Chain (recovery time < 0 ms) for Ethernet redundancy Isolated redundant power with universal 0/0 VAC power inputs G-port Full Gigabit Managed Switch Up to SFP connections Gigabit Turbo Ring and Turbo Chain (recovery < 50 ms) Isolated redundant power inputs Fanless, -0 to 75 C operating temperature range Industrial Five-Band HSPA High Speed IP Gateway with VPN Five-band UMTS/HSPA 800/850/ AWS/900/00 MHz Quad-band GSM/GPRS/EDGE 850/900/800/900 MHz Centralize private IP management software with OnCell Central Manager /-port Serial-to-Ethernet Modbus Gateways Slave mode supports 6 TCP masters and up to 6 serial slaves at the same time Master mode supports TCP slaves at the same time Emergency request tunnels ensure QoS control Redundant dual DC power inputs 5 9

11 EDR-G90 Auxiliary Control Systems IKS-678- GTXSFP EDS-50A EDS-08A EDS-P506A- PoE Industrial VPN Secure Router, WAN, Firewall/NAT, 0 VPN Tunnels Firewall/NAT/VPN/Router all-in-one Gigabit copper/fiber combo port Firewall with Quick Automation Profile for Fieldbus protocols +G-port Modular Managed Switch Up to -port GbE and -port FE uplink Turbo Ring and Turbo Chain (recovery time < 0 ms) for Ethernet redundancy Isolated redundant power inputs Fanless, -0 to 75 C operating temp. range 7+G-port Gigabit Managed Ethernet Switch Gigabit ports for redundant ring and Gigabit port for uplink Long distance fiber transmission of up to 80 km 8-port Managed Ethernet Switch Plug-n-play Turbo Ring and Turbo Chain, and RSTP/STP for Ethernet redundancy IPv6, Modbus/TCP, LLDP, DHCP Option 8, SNMP Inform, IGMP, QoS, and VLAN 6-port PoE+ Managed Ethernet Switch IEEE 80.at/af compliant PoE ports (up to 0 W per port) /8 VDC wide range power input Intelligent power consumption detection, PD failure check function 0 iopac 55* RTU Controller with 8 DIs, 8 DIOs, and 8 AIs Supports C/C++ or IEC 6- programming languages Supports DNP (outstation) protocol Robust and compact design *Available in Q, 0 iologik E0 Ethernet Remote I/O with 8 AIs Built-in -port Ethernet switch for daisychain topology Free support of Moxa s Active OPC Server for connecting to SCADA systems User-defined Modbus/TCP addressing UL/cUL Class I Div., ATEX Zone certification VPort 6-MP Rugged Box-Type IP Camera -0 to 75 C operating temperature without heater or cooling fan 80 x 70 resolution with DNR/BLC/WDR Up to independent video streams ( x H.6, x MJPEG) VPort 6 TRC-90* -ch H.6/MJPEG Industrial Video Encoder Video stream up to 0/5 FPS at full D (NTSC: 70 x 80; PAL: 70 x 576) resolution Three simultaneous streams, latency under 00 ms, and SD slot Modbus/TCP and VPort SDK plus support 9-inch Fanless Chassis Media Converter 8 slots for high density applications Supports hot-swap and dual power inputs Fanless chassis design SNMP and web console for easy management *Available in Q, 0 0

12 P R O D U C T Industrial Design Certified for Hazardous and Offshore Sites Oil & gas facilities are faced with the constant risk of explosion and leakage that not only jeopardizes business operations, but also puts human lives in danger. For this reason, equipment and systems used in these settings must be held to rigid standards to guarantee the highest level of security and reliability. Moxa s industrial products are designed in strict accordance with globally accepted standards for explosion protection in hazardous locations. Approved certifications include UL/cUL Class I Division, ATEX Zone, IECEx, and DNV/GL/ABS/LR/NK. Environmental Hazards and Ratings Class I Division / ATEX Zone Equipment in a hazardous location where ignitable concentrations of gases, vapors, or liquids are located (such as a pipeline) must be specially designed and tested to meet Class I Division / Zone standards to avoid explosions. Moxa products have been tested for safe and reliable operation in hazardous locations in accordance with strict, internationally recognized UL/cUL Class Division, and ATEX Zone standards. IECEx Certification IECEx, the IEC system for certification to international standards related to equipment used in explosive atmospheres, is a new global compliance certification for the oil & gas industry. Moxa s industrial serial device servers, media converters, and Ethernet gateways have obtained certifications to meet the required level of safety and quality for use in hazardous areas. All of these products must pass a rigorous battery of tests and quality assessment regimens before they can be awarded a certificate of conformity. Maritime Certification Offshore oil rigs and drilling platforms place high demands on their equipment since they are more likely to be exposed to a wide variety of environmental damage, such as salt mist and humidity. For this reason, equipment used in these settings must conform to maritime standards to provide the highest level of onsite security. The maritime standards, which include DNV, GL, ABS, LR, and NK for individual regions, confirm a device s ability to withstand temperature, humidity, vibration, EMC, and other stresses, as well as its suitability for specific, well-defined classes of marine environments. Moxa s industrial Ethernet and computing solutions have passed several marine certifications to guarantee the reliable and safe operation of equipment used on ships or at offshore sites. A P P R O V E D Hazardous and Non-Hazardous Areas Zone 0 Area: Gas or vapor is present all of the time. Zone or Division Area: Gas, vapor, or mist will be present for long periods of time under normal operating conditions. Zone or Division Area: Gas, vapor, or mist is only present under abnormal conditions. Non-Hazardous Area: A safe area such as a residence or office. Moxa s Rigorous Testing Ensures High Reliability To verify their reliability and longevity, all Moxa products must pass a rigorous set of design and production tests, including wide temperature, ESD, surge/eft, vibration/shock, and burn-in tests. Design-Phase Tests Maximize Operational Stability ESD Test Surge/EFT Test Wide Temperature Test Production-Phase Tests Optimize Hardened Quality Board-level Test Burn-in Test Vibration Test Shock Test Freefall Test System Level Test Hipot Test

13 Product Selection Guide Models Industrial Ethernet Switches EDS-608/6/66/69 Interface 8, 8+ GE, 6, 6+ GE ports Class I Div. / ATEX Zone Certifications IECEx DNV/GL Operating Temperature (T Models) Highlights P P -0 to 75 C Modular, managed, up to Gigabit ports EDS-50A/58A 7+ GE, 6+ GE ports P P -0 to 75 C Managed, Gigabit performance EDS-505A/508A/56A 5, 8, 6 ports P P -0 to 75 C Managed EDS-05A/08A 5, 8 ports P P -0 to 75 C Managed, entry-level EDS-05/08/09/6 5, 8, 9, 6 ports P P -0 to 75 C Unmanaged, advanced EDS-05A/08A 5, 8 ports P P -0 to 75 C Unmanaged, best price-to-performance EDS-G05/G08 5 GE, 8 GE ports P P -0 to 75 C Full Gigabit, unmanaged IEEE 80.a/b/g Industrial Wireless AP/Bridge/Clients AWK-6 IEEE 80.a/b/g P -0 to 75 C Zero wireless packet loss AWK- IEEE 80.a/b/g P -0 to 75 C IP68 protection AWK- IEEE 80.a/b/g P -0 to 75 C Millisecond-level Turbo Roaming Media Converters IMC-0 P Pending (Q, 0) P (DNV) -0 to 75 C Ethernet-to-fiber IMC-0G P Pending (Q, 0) -0 to 75 C Ethernet-to-fiber, Gigabit ICF-50 P Pending (Q, 0) -0 to 85 C Serial-to-fiber, -way communication (RS-, fiber, RS-/85) ICF-80I Pending (Q, 0) Pending (Q, 0) -0 to 75 C PROFIBUS-to-fiber ICF-80I* Pending (Q, 0) Pending (Q, 0) -0 to 75 C PROFIBUS-to-fiber, dual fiber ports Industrial Ethernet Gateways MGate MB70/MB70, ports P P P (DNV) -0 to 75 C Modbus RTU/ASCII-to-Modbus TCP MGate EIP70/EIP70, ports P P -0 to 75 C DF-to-EtherNet/IP MGate 50-PBM-PN port Pending (Q, 0) Pending (Q, 0) -0 to 75 C PROFIBUS-to-PROFINET MGate 505-MB-EIP port Pending (Q, 0) Pending (Q, 0) -0 to 75 C Modbus-to-EtherNet/IP Industrial Serial Device Servers NPort IA550/550, ports P P P (DNV) -0 to 75 C Patented ADDC (Automatic data direction control) NPort IA550A/550A, ports P Pending (Q, 0) -0 to 75 C kv isolation, surge protection, metal housing Panel Computers EXPC-9* GE ports, RS-/85 ports Pending (Q, 0) Pending (Q, 0) -0 to 60 C, -0 to 60 C (with heater) x86-based, 9-inch LED touch panel, IP65, Gigabit IP Cameras VPort 6-MP P -0 to 75 C 70P IP camera, IVA function VPort 56-MP* Pending (Q, 0) -5 to 75 C 080P IP camera, zoom function Video Encoders VPort 5 channel P P (DNV) -0 to 75 C -channel, full-motion, MJPEG/MPEG RTU Controllers iopac 55* 8 AIs, 8 DIs, 8 DIOs Pending (Q, 0) -0 to 75 C Supports C/C++, IEC 6-, DNP Ethernet Remote I/O Products iologik E0 8 AIs P -0 to 75 C Ethernet ports, peer-to-peer iologik E AIs, DIs, DIOs P -0 to 75 C Ethernet ports, peer-to-peer *Available in Q, 0 Wide Operating Temperature Range Oil & gas environments can be excruciatingly hot or unbearably cold, and require network devices to operate under wide temperature conditions. Moxa s products are subjected to rigorous testing beyond industry standards to ensure their suitability for a wide operating temperature range. For instance, while regulatory standards require only a temperature change of ºC/minute during cycling testing, Moxa conducts stricter testing using ºC/minute. In addition, all Moxa products must pass a 0-hour dynamic burn-in test to ensure the best industrialgrade quality and reliability. Conformal Coating Services Offshore oil drilling platforms, onshore oil wells, and refineries must cope with moisture, salt, and airborne chemicals that can react with and damage the electronics on printed circuit boards. Conformal coating is a thin, even layer of non-conductive material applied over electronics to protect against moisture, contaminants, and corrosion, and resists extreme temperatures, vibration, salt spray, and chemical vapors, ensuring a longer lifecycle. Moxa provides conformal coating services with strict coating and inspection processes to help customers construct more reliable and rugged network systems. Please contact a Moxa sales representative for information.

14 Network Management Easy-to-Use, Easy-to-Integrate Industrial Networking and Automation Software Solutions SCADA and network management software allows automation administrators to supervise and manage oil & gas networks and industrial devices from a control center anytime, anywhere and ensures quick configuration, monitoring, troubleshooting, and responsiveness of control systems and networks, without the cost of sending engineers to oil field sites to collect data. To maximize management efficiency, Moxa provides several user-friendly network management solutions and SCADA/HMI integration solutions. From real-time network management, to wellhead CCTV surveillance, to gas station remote monitoring, Moxa s software solutions deliver the unique innovative values you need to achieve operation excellence. Advanced Efficiency Simplifies Network Configuration and Monitoring Seamlessly Integrate Smart Remote/CCTV Monitoring with SCADA Systems Active OPC Server and DA-Center Automation Software Moxa s patented Active OPC Server is a software package that operates as an OPC driver for HMI and SCADA systems, giving users the advantage of faster I/O response time with push-based communication from Moxa s RTUs and remote I/O devices. An I/O status is updated in Active OPC Server only when the I/O status changes, a pre-configured interval is reached, or when a request is issued by a user. In addition, DA-Center, an I/O device monitoring solution, makes I/O data acquisition and historical analysis easier by converting remote I/O data to a format that can be stored in simple spreadsheets or IT databases. Network Objects: Full Status Parameters for SCADA Monitoring To seamlessly integrate network status monitoring with a SCADA system, Moxa s industrial Ethernet switches support EtherNet/IP EDS files, AOI objects, and PROFINET GDS files, together with a number of network parameters and switch faceplates and icons to ensure that you get an accurate reading of your network s status. MXview: Automation-Friendly Network Management Software Moxa MXview, an industrial network management software, uses smart visualization features to display an oil and gas network topology in real time, allowing you to diagnose the health of your network and keep your system up and running. Features and Benefits Automatic topology/vlan/igmp visualization and event playback functionality Monitor Moxa s industrial Ethernet network devices and all connected SNMP devices OPC agent for SCADA and third party NMS integration MGate Manager: Automated Fieldbus Configuration and Management Platform Use the automation functions provided by Moxa MGate Manager together with Moxa s industrial Ethernet gateways to integrate fieldbus devices with an industrial Ethernet network in just minutes. With MGate Manager, you can monitor I/O data and easily troubleshoot critical events with event logs. Features and Benefits AutoScan lets you detect PROFIBUS devices with just one click QuickLink provides automatic and error-free I/O mapping by passively detecting Modbus requests AutoCalibration ensures one-click detection of response timeout settings for Modbus connections SoftNVR-IA and VPort SDK PLUS IP Surveillance Software The ready-to-use Moxa SoftNVR-IA IP surveillance software has a built-in OPC server for notifying SCADA systems of event-triggered video displays, recordings, and video statuses. For easy third-party software development, the user-friendly VPort SDK PLUS (where SDK stands for software development kit) includes CGI commands, an ActiveX Control SDK, and an API SDK, to help integrate VPort video streams with any type of software, including NVRs, VMSs, and SCADA systems. In addition, the coding-free VPort Gadget development tool eliminates the need for code that would otherwise be required to embed IP video into a SCADA system. SoftNVR-IA IP Surveillance Software SCADA

15 Keep Safe from Cyber Attacks and Vulnerabilities with High-Performance Industrial Network Security Industrial control systems are more vulnerable to cyber attacks now than ever before, particularly since PLCs, RTUs, sensors, and SCADA systems are being connected with communication Ethernet backbones to enable central management. Any intrusion in the industrial control system can reduce production quality and even cause significant damage and safety risks. A secure network system with effective Layer security features, such as IEEE 80.X, SSH, HTTPS, and port security, together with secure routers, can greatly enhance the security and availability of the process control network infrastructure to achieve safe and efficient production, while protecting critical SCADA and DCS systems from unexpected external and internal cyber attacks and vulnerabilities. Network Security Designed for Secure Gigabit Network Access Moxa offers a series of all-in-one industrial secure routers with firewall/nat/vpn capability that are designed for sensitive remote control and monitoring networks. They work by securing both remote access and critical devices. Moreover, these products support high-speed Gigabit performance to ensure quick remote secure communication without compromising network security a strategy ideal for any data-hungry application. The EDR series can create encrypted VPN tunnels that connect a control room with remote sites, and the built-in firewall/nat functions can protect critical industrial devices from unauthorized access or the influence of broadcast packets. Overall Features Gigabit performance with up to 500 Mbps throughput Innovative PacketGuard for Modbus TCP packet inspection Dual WAN or multiport connection available From secure site, to zone, to cell solutions Layered Cyber Security Solution for Oil & Gas Automation Regardless of how big your control network is, Moxa s complete secure router series offers the most optimized cyber security solution for creating secure field sites, secure function zones, and secure device cells. Industrial Secure Routers Dual WAN FW Bridge Multiport EDR-G90 EDR-G90 EDR-80 Target Requirements Dual WAN redundancy Gigabit bandwidth at up to 500 Mbps Network security between a WAN and LAN Gigabit bandwidth at up to 00 Mbps Front-end secure routers with Layer switch functions Multiple ports for accessing device connections Interface WANs (combo); LAN (combo) WAN (combo); LAN (RJ5) WAN; 5 LANs Throughput 500 Mbps (0,000 fps) 00 Mbps (5,000 fps) 0 Mbps (0,000 fps) VPN 00 IPSec tunnels 50 IPSec tunnels 0 IPSec tunnels Firewall/NAT 5/56 policies 56/8 policies 56/8 policies DMZ Operating Temperature 0 to 60 C, -0 to 75 C (T model) 0 to 60 C, -0 to 75 C (T model) -0 to 60 C, -0 to 75 C (T model)

16 Success Stories Upstream Real-Time Monitoring, Control, and Management of Assets for Oil Drilling Platforms Company: ONGC (Oil and Natural Gas Corporation), Ltd. Location: India The Oil and Natural Gas Corporation (ONGC) contributes 77% of India s crude oil and 8% of its natural gas supply. The goal of this project was to centralize asset management for 5 of ONGC s remote oil & gas production platforms. The system includes both offshore and onshore locations, and relies on networked radio transmissions to link on-site monitoring and control instruments with the central, enterprise-scale control server. Moxa supplied the network solutions for the upstream production locations, where industrial-grade durability and heightened safety precautions are crucial requirements. Instruments at the manufacturing sites communicate with Ethernet-capable RTUs via the HART protocol. The signals from the RTUs are forwarded to Moxa s EDS-08A Ethernet switches, and then passed to NPort IA550 serial device servers before being transmitted by radio to the central control facility. Certified as Class I Div. / Zone and DNV approved, Moxa s switches and device servers are critical components, guaranteeing safe and reliable site-to-station communications for monitoring and control. Remote monitoring, control, and management of drilling platforms from the control center Certified safe for Zone hazardous offshore oil & gas locations Hardened features for in-the-field durability Strong tolerance of wide temperature variations Why Moxa? Moxa s products meet the Class I Div. / Zone and DNV standards Industrial design suitable for harsh industrial environments Products can operate in a -0 to 75 C temperature range Moxa s Ethernet switches support intelligent management functions: RMON, SNMP, and others Upstream Highly Reliable Remote Wellhead Monitoring Networks Company: Aramco Location: Saudi Arabia This project involved 500 distributed oil & gas wells situated in the Khurais region of Saudi Arabia. Saudi Aramco needed a network that reliably connects remote RTUs at the wellheads to the SCADA system that controls field instruments. Each field site must link a Moxa VPort 5 video encoder to a CCTV camera, and an MGate MB70I Modbus gateway to a multiphase flow meter that connects the flow meter to a PLC. The SCADA system is located at the Gas-Oil Separation Process (GOSP) plant, so for video, voice, and data communications, each station is connected to the Gigabit fiber backbone by an EDS-50A Gigabit Ethernet switch. Finally, in the SCADA center s communication room, Moxa s modular PT-788 series managed Layer Ethernet switches were installed to handle data transmissions across different LAN networks. Network redundancy to guarantee highly available data communication Long-haul transmission Hardened devices capable of operating under severe conditions Layer switches optimize routing control across multiple LAN segments Why Moxa? Gigabit Turbo Chain redundancy, with network recovery under 50 ms Gigabit fiber backbone to ensure highly reliable long-haul video, data, and voice communications Satisfies a wide range of international certifications for hazardous conditions Wide temperature tolerance, from -0 to 75 C Layer switching makes network administration more efficient 5

17 Upstream Mobile Networking for Oil Well Pump Trucks Location: USA Modern real-time wireless networking is being used to further automate the oil & gas industry, making it more efficient in both energy usage and operational optimization. This project uses Moxa s wireless and cellular solutions to build a reliable remote control and telemetry system that connects oil well pump trucks at the wellheads to a local, mobile control center housed in a van, which itself uses wireless technology to connect to the central control center. Two AWK-s are installed on each pump truck, with one configured as an 80. access point for on-site monitoring by engineers, and the other configured as a dedicated 80. client connected to another AWK- access point located in the van. Finally, the mobile control center in the van uses a PLC and an OnCell G cellular IP gateway to maintain wireless cellular communications with the remote control center. A wireless solution for widely distributed remote sites Must tolerate temperatures from -0 to 70 C, with ATEX and UL approvals for hazardous environments A wireless architecture suitable for mobile locations spanning long distances Why Moxa? Proven mastery of industrial-grade 80. and cellular solutions Full compliance with ATEX directives on hazardous environments Established reputation as an integrator of TCP/IP and cellular for industrial automation Upstream Real-time Data Monitoring on a Drilling Rig Location: USA One of the leading oil well solutions companies faced a big challenge when their PROFIBUS interface card was phased out. The PROFIBUS interface card is a critical component, connecting the operator station display to reliable and accurate real-time drilling data such as drilling breaks, flow deviations, and pressure loss to help drillers instantly identify problems, and prevent system downtime. As a result, this company needed to find an easy-to-use and cost-effective solution for their mission-critical oil & gas application. Moxa s MGate 50-PBM-MN Modbus TCP gateway integrates existing PROFIBUS devices into the Modbus TCP-based operator station, while keeping the existing driver settings for remote control. It features a web-based monitoring tool and relay output warning to keep maintenance to a minimum. Direct data monitoring of PROFIBUS devices by a Modbus TCP master A web-based monitoring tool for easier setup and simplified maintenance Industrial-grade hardware designed to survive the environment on a drilling rig Why Moxa? The one-click AutoScan function allows gateways to detect data from PROFIBUS I/O modules directly Web-based monitoring tool enables easy maintenance and configuration Supports a fault value function that allows gateways to automatically return to default settings to prevent unpredictable operational problems when the SCADA connection is lost 6

18 Success Stories Midstream Midstream Enhancing Network Efficiency and Security on an Oil Pipeline Location: Russia A leading pipeline company in Russia deployed a fiber-optic SDH backbone to transmit data streams to a central monitoring and control station across a 600 kilometer expanse. Along the way, the network integrates a variety of pipeline subsystems that include ventilation, air conditioning, and fire control. Strong redundancy to guarantee continuous high availability was achieved with a Gigabit ring topology, built from more than a thousand Moxa EDS-50A industrial Ethernet switches. Furthermore, each node along the pipeline serves Moxa iologik E0 RTU controllers, which monitor and control local routines while actively responding to unexpected events by notifying the control center with alarms and emergency updates. Securing Gas Transfer Stations Against Cyber Attacks Location: USA Long-distance transmission of data across the harsh Russian terrain Gigabit ring network, for high resilience and availability Rugged, reliable, industrial-grade device durability suitable for harsh environments Why Moxa? Fiber-optic communications capable of spanning 80 km segments Proven optical fiber ring networking reliably improves scalability and network uptime Extreme -0 to 75 C temperature tolerance Ethernet micro controllers actively deliver event-driven reporting for real-time alarm management Large gas pipelines are highly volatile and span thousands of kilometers, necessitating the installation of secure monitoring and control systems that are strongly protected from cyber attacks. In this project, gas transfer stations along a pipeline use Moxa s EDS-508A managed switches to connect gas analyzers and PLCs to a remote SCADA system. To ensure local security and data authenticity, Moxa s EDR-G90, a Gigabit industrial router, was used to build highly secure VPN tunnels between the transfer stations and the central SCADA system. As a router with a NAT-capable firewall and VPN client, the EDR-G90 not only shields devices on the internal LAN from unauthorized access, but also maintains strongly secure communications across public networks. Secure, reliable data transmissions with strong authentication, encryption, and integrity protections Strong firewall protections and access controls for the internal network A rugged, industrial design capable of functioning reliably in harsh environmental conditions Why Moxa? Ample Gigabit bandwidth with copper/ fiber combo ports Strong VPN client with redundant WAN ports for increased reliability A router with native NAT-capable firewall and VPN client Simple and intuitive configuration interface Suitable for operations in temperatures from -0 to 75 C 7

19 Downstream Downstream Optimizing a DCS Network at a Naphtha Cracking Plant Company: FPCC (Formosa Petrochemical Corporation) Location: Taiwan This project involved the optimization of a distributed control system (DCS) used for monitoring and control at a naptha cracking plant in southern Taiwan. To guarantee continuous, 00% network availability, two parallel, independent fiber-optic Ethernet networks were used as the DCS backbone, giving full redundancy to control, monitoring, and sensor devices by connecting every DCS station to both networks. Moxa s modular EDS-78 managed Ethernet switches served as the backbone nodes, connecting the HMI/SCADA system to remote stations where data servers and controllers monitor and manage local I/O data. To connect the remote stations to the backbone, unmanaged EDS-08 Ethernet switches were used. Finally, the entire equipment array of the DCS workstations were also duplicated, to provide full across-the-board redundancy, making this Ethernet-based automation network among the most reliable in the world. Highly redundant industrial Ethernet infrastructure for continuous, fail-safe network availability Gigabit bandwidth for real-time data communications Flexible deployment using either optical fiber or copper cabling Why Moxa? Turbo Ring redundancy, with ultrafast 0-millisecond-or-less network recovery Up to four Gigabit Ethernet ports, for speedy, high-bandwidth network performance Moxa s modular EDS-78 high-portdensity switches offer media flexibility while leaving room for future upgrades Delivering IDAS and CCTV to a Refinery Security System Location: Saudi Arabia An Aramco refinery in Yanbu, Arabia, wanted an Intruder Detection Alarm System (IDAS) and IP CCTV security system for both their field and administrative sites. To meet the demands of video, voice, and data transmission over a network, high-bandwidth Gigabit fiber was used in a redundant ring topology for the backbone, while at field sites Moxa s VPort 6 industrial video encoders linked analog cameras to the Ethernet ring, and iologik E micro RTU controllers were used to automate intrusion sensors. In this way, the SCADA system and video management system (VMS) were reliably integrated with I/O events and distributed data collectors into a reliable, real-time security and alarm system. With Moxa s expertise in the design of rugged industrial products, and key enhancements such as active, intelligent alarms, CGI command communications, and automated deployment utilities, Moxa s products provided a one-stop-shop solution. Operate reliably in outdoor cabinets located in a desert, without air conditioning. Customized CGI command functions Open architectures compatible with virtually any third party VMS, DCS, or SCADA system Why Moxa? No heater or fan required: -0 to 75 C wide temperature tolerance Video encoders that conform to ONVIF standards, guaranteeing interoperability with any standard VMS RTU controller with innovative Click&Go control logic that pushes active warning messages to the VMS RTU controller supports CGI command to extend control logic for key instruments (IP cameras, for example), allowing easily customized event handling Redundant Gigabit capacity fiber network ensures high bandwidth and non-stop network performance 8

20 Your Trusted Partner in Oil & Gas Automation Moxa is a leading manufacturer of industrial networking, computing, and automation solutions. With over 5 years of industry experience, Moxa has connected more than 0 million devices worldwide and has a distribution and service network that reaches customers in more than 70 countries. Moxa delivers lasting business value by empowering the oil & gas industry with reliable networks and sincere service for automation systems. Your One-Stop Shop for Oil & Gas Projects Industrial Ethernet Switches Industrial Wireless Products Industrial Ethernet Gateways Industrial Secure Routers Serial Device Servers RTU Controllers and Remote I/O IP Video Solutions Panel PCs and Embedded Computers Moxa Sales and Marketing Headquarters Toll Free: Tel: Fax: usa@moxa.com The Americas Moxa Americas Toll Free: -888-MOXA-USA Tel: Fax: usa@moxa.com Europe Moxa Germany Tel: Fax: europe@moxa.com Asia-Pacific Moxa Taiwan Tel: Fax: asia@moxa.com China Moxa Shanghai Tel: Fax: china@moxa.com Moxa Design and Engineering Headquarters Tel: Fax: info@moxa.com Moxa Brazil Tel: Fax: brazil@moxa.com Moxa France Tel: Fax: france@moxa.com Moxa India Tel: Fax: india@moxa.com Moxa Beijing Tel: /6 Fax: china@moxa.com Moxa UK Moxa Russia Moxa Shenzhen Tel: Fax: uk@moxa.com Tel: +7 (95) Fax: +7 (95) russia@moxa.com Tel: /9 Fax: china@moxa.com 0 Moxa Inc. All rights reserved. The MOXA logo is a registered trademark of Moxa Inc. All other logos appearing in this document are the intellectual property of the respective company, product, or organization associated with the logo