OBS-BIV (FR): SIP TRUNK

Size: px
Start display at page:

Download "OBS-BIV (FR): SIP TRUNK"

Transcription

1 Technical Bulletin Alcatel-Lucent OmniPCX Office TC1788 ed.01 OBS-BIV (FR): SIP TRUNK CONFIGURATION GUIDE OXO R820 This document details the configuration necessary for the ALCATEL-LUCENT OXO R820 to inter-operate with the BIV SIP trunk offer of the Operator OBS in France. Revision History Edition 1: March 15, 2013 creation of the document Legal notice: Alcatel, Lucent, Alcatel-Lucent and the Alcatel-Lucent logo are trademarks of Alcatel-Lucent. All other trademarks are the property of their respective owners. The information presented is subject to change without notice. Alcatel-Lucent assumes no responsibility for inaccuracies contained herein. Copyright 2013 Alcatel-Lucent. All rights reserved.

2 Table of contents 1 GENERAL REFERENCES SCOPE OF THE DOCUMENT SCOPE OF ALCATEL-LUCENT S SUPPORT SOFTWARE/ HARDWARE VERSIONS FEATURE & SET COMPATIBILITY LIST Supported Sets Supported Features Restrictions SYSTEM GENERAL INFO AND BASIC SET UP PRE-REQUIRED INFORMATION SYSTEM CONNECTION PROCEDURE NETWORK CONFIGURATION (PUBLIC) NUMBERING CONFIGURATION Installation numbers DDI numbers DETAILED SIP TRUNK CONFIGURATION SIP ABILITY CHECK SIP TRUNK CREATION Management of VoIP channels Physical Access associated to the SIP Trunk Hosting System Trunk Group INTERNAL NUMBERING PLAN TRAFFIC SHARING AND BARRING (REMINDER) ARS CONTEXT ASSOCIATED TO THE SIP TRUNK ARS Trunk Groups Lists Gateway/ Registrar Proxy parameters ARS prefixes for remote Gateway with Static-IP ARS prefixes for remote Gateway with Dynamic-IP SIP format of public phone numbers VOIP MISC PARAMETERS SIP Timers Fax (T38) NOTEWORTHY ADDRESSES Debug Labels Other Labels MISCELLANEOUS CONFIGURATION Calling Identity when External Call Forward SIP TRUNK CONFIGURATION ABSTRACT Copyright 2013 by Alcatel-Lucent. All rights reserved page 2/28

3 1 General The purpose of this document is to provide the main configuration steps of the Omni PCX Office IPBX (OXO) to ensure inter-operation with the SIP BIV commercial offer delivered by the Operator OBS. 1.1 References Alcatel-Lucent documentation (available from the Business Partner Web Site): [1] Alcatel-Lucent OmniPCX Office Communication Server- Expert Documentation [2] Alcatel-Lucent OmniPCX Office Communication Server- Public SIP Trunking 1.2 Scope of the document This guide focuses the configuration of OXO SIP trunk feature. It is intended for normal-skilled engineers who are familiar with the OMC config-tool and can manage the basic set up of the IPBX which is not covered herein (e.g. TDM trunk and management of local phones). Apart from the OMC screen pictures, the configuration parameters /values are put in green with the sign placed in front. Some examples: International_Prefix = "00" (quoted value for a typed-field in OMC) RTP_Direct = true (non-quoted value when taken from a user pick-list in OMC) ARS_IP_Address = N/A (value is N/A when the parameter is disabled in OMC) The unambiguous name given to the parameters is proper to the present document and is derived from the OMC naming. When terminated with _example, a parameter is site-dependent and the value provided needs to be customized. Examples: Subnet_Mask_example = " " SIP_Trunk_Channels_example = 8 Because the examples given can be from a real customer system, for privacy/ security reasons, some parameters (i.e. IP addresses, logins, public phone numbers) may be masked or partially masked with asterisks. Examples: GW_Password = "*******" Instal_Number_example = "29***4330 Copyright 2013 by Alcatel-Lucent. All rights reserved page 3/28

4 1.3 Scope of Alcatel-Lucent s support Depending on the status of its approval process, the present SIP trunk solution may receive either Limited Availability (LA) or General Availability (GA) level of support from Alcatel-Lucent. The support delivered to Alcatel-Lucent Business Partners is strictly delimited by the approved interop context and system configuration that are detailed in this document. This support covers the protocol and functional aspects of the SIP trunk but not the audio quality of calls for the part incumbent on the Operator or linked to the client's IP infrastructure. 1.4 Software/ Hardware versions INFRASTRUCTURE COMPONENT OXO system OMC Management Software VERSION (minimal compatible) ALZQO820/ OMC820/19.1a 1.5 Feature & Set Compatibility List The two tables hereafter list the main inter-operation features and the models of sets that are supported in the solution described. The "Supported" value corresponds to: - "" => supported by Alcatel-Lucent (i.e. tests done or not necessary for the related context) - "NO" => not supported (i.e. tests are KO or have not been done or are Not Applicable) - "WR" => (With Restrictions") restricted support as detailed in section For an item stated as not supported and mentioning the remark "Tests not done": In case you would like or need to have this item passed to the supported category and, if you are ready to collaborate with our approval process: simply send an to "sip-for-smb@alcatel-lucent.com" and ask for the details related to the certification of the required item Supported Sets The following table lists the models of sets supported. SUPPORTED SETS (OXO/ OBSR820GA) Analogue Z (POTS) Desktop IP 40x8 series Desktop UA 40x9 series Desktop MyICphone 8082 Appli MyICmobile IPhone Appli MyICmobile Android DECT-UA models (all) SUPPORTED * ( / NO / WR) REMARKS Copyright 2013 by Alcatel-Lucent. All rights reserved page 4/28

5 1.5.2 Supported Features The following table lists the main inter-operation features supported. INTER-OP FEATURE (OXO/ OBSR820GA) SUPPORTED * ( / NO / WR) REMARKS Type of Topology Remote Hosted NAT SIP Registration SIP Authentication GW Dynamic Mgmt. Mode Direct RTP Outbound Basic Call Inbound Basic Call Dynamic Codec Mgmt. Call Release Internal Call Transfer Internal Call Forward Call Hold Inbound Call to DDI Reception of DTMF Emission of DTMF Emergency Calls Caller s Repertory CLIP (Inbound and Outbound) CLIR (Inbound and Outbound) External Call Transfer External Call Forward Conference with 2 External Outbound Fax T38 NO T38 not supported by Provider Inbound Fax T38 NO T38 not supported by Provider Outbound Fax G711 Inbound Fax G711 Dynamic Call Routing Busy State Preannouncement Restrictions None reported. Copyright 2013 by Alcatel-Lucent. All rights reserved page 5/28

6 2 System General Info and Basic Set Up 2.1 Pre-required information The tables below gather all necessary information that should be collected before starting the OXO configuration. When the Example Value is empty, the parameter is either not relevant or not mandatory for the configuration with this SIP Operator. IP PARAMETERS Data Type Parameter Example Value IP Data subnetwork OXO CPU - Data IP Default Gateway Netmask Data VLAN IP Voice Subnetwork OXO CPU - Voice IP Default Gateway Netmask Voice VLAN Table of IP infrastructure parameters (to be customized for the customer site) SIP TRUNK PARAMETERS Data Type Parameter Example Value Numbering Plan Installation Number 29***4330 Public DDI range SIP-Trunk Data SIP Operator GW IP Registered Username Login +3329***4330@sip.osp.com Password ******* SIP Operator Domain sip.osp.com SIP Customer Domain sip.osp.com SIP Realm Outbound Proxy imspcf211gm.sip.osp.com Registrar IP address Registrar name sip.osp.com Resolving DNS server Resolving DNS server Table of SIP trunk parameters (communicated by the Operator) Copyright 2013 by Alcatel-Lucent. All rights reserved page 6/28

7 2.2 System Connection procedure In order to configure the IPBX, it's necessary to use the OMC software at the Expert level session 2.3 Network configuration The IP configuration is to be set before going further. This is done using the OMC menu Hardware and Limits - > LAN IP Configuration The Boards Tab shows the IP address for the main CPU and the default gateway. The main CPU IP address must be edited there Main_CPU_IP_Address_example = " " The LAN Configuration Tab lets you edit the values of default gateway IP address and the subnet mask Def_Router_Address_example = " " Subnet_Mask_example = " " Any modification of the LAN-IP parameters requires a further system reboot ( Warm Reset ) to validate the change!! 2.4 (Public) Numbering configuration As for any type of trunk, the public numbering used for SIP trunk is first ruled by the general numbering configuration of the PBX Installation numbers Go to OMC Numbering -> Installation Numbers.to check/ edit the Installation Numbers screen Copyright 2013 by Alcatel-Lucent. All rights reserved page 7/28

8 - Configuration for Installation Numbers : Installation Number : Instal_Number_example = "29***4330 International Prefix : International_Prefix = "00" International Code : International_Code = "33" Intercity Prefix : Intercity_Prefix = "0" Intercity Code : Intercity_Code_example = "" Recall Prefix : Recall_Prefix = "0" Alternative System CLIP : Alternative_System_CLIP_example = "" DDI numbers Go to OMC:.. Numbering -> Numbering Plans Public Numbering Plan Tab Subscriber Configuration for Public Numbering Plan : DDI range : DDI_Range_example = " " Copyright 2013 by Alcatel-Lucent. All rights reserved page 8/28

9 3 Detailed SIP Trunk Configuration Illustrated with OMC screenshots, this chapter describes the OXO configuration parts corresponding to the public SIP trunk and the hosting IP infrastructure. 3.1 SIP ability check The trunk is the link between the IPBX and the network. A specific SW licence is mandatory to enable IP trunks on the system. The OMC menu Hardware and Limits -> Software Key Features gives an overview of the allowed features. In the Multi-site Tab, check the number of IP Trunks really activated (number of channels available for the VOIP trunk). 3.2 SIP Trunk creation The VoIP trunk uses a specific signaling protocol (i.e. SIP) and physical resources embedded in the IPBX (i.e. DSP s). To create the SIP trunk in the system, it's first necessary to allocate some of the DSP resources to it Management of VoIP channels Go to OMC Voice Over IP -> VOIP:Parameters - General Tab to check/ edit the requested parameters. Copyright 2013 by Alcatel-Lucent. All rights reserved page 9/28

10 - the VOIP protocol in use : VOIP_Protocol = SIP - from the amount available in the system, the number of channels dedicated to VoIP trunks: VoIP_Trunk_Channels_example = 8 - the RTP routing mode and codec management for IP extensions: RTP Direct : RTP_Direct = true Codec pass-through for SIP trunk : Trunk_Codec_Passthru = false Codec pass-through for SIP phones : Phone_Codec_Passthru = true - the IP Quality of Service : IP Quality of Service : IP_QoS_example = With OMC menu Voice Over IP -> VOIP:Parameters - DSP Tab, also define the global control of Echo cancellation and the VAD parameters of VoIP calls. 1 2 Set DSP parameters as follows: Echo Cancellation : Voice Active Detection : DSP_Echo_Cancel = true DSP_VAD = false Copyright 2013 by Alcatel-Lucent. All rights reserved page 10/28

11 3.2.2 Physical Access associated to the SIP Trunk From OMC External Lines -> List of access, select the VoIP access associated to the VoIP trunk Then, configure the access parameters: Public trunk option : Public_Trunk = true number of channels allocated to the SIP trunk VoIP-Trunk Ch. : SIP_Trunk_Channels_example = 8 Alternative CLIP/COLP Number : Trunk_Alternative_CLIP_example = Hosting System Trunk Group To enable phone calls over the SIP trunk, it s necessary to have this latter included within one Trunk Group of the system. Two alternative cases are considered here below. Copyright 2013 by Alcatel-Lucent. All rights reserved page 11/28

12 Use the OMC menu External Lines ->List of Trunk Groups is used for that. Carry out the selections and push-button steps 1 to 6 above. As a variant, at step 2, you can decide to include the SIP trunk access into the OXO s main Trunk Group (i.e. step 2a for index #1) or include it into one secondary Trunk Groups (e.g. step 2b for index #2). The SIP trunk can be placed freely into one or several Trunk Groups of the system (having it within several Trunk Groups can be useful to manage traffic and particular sharing between users). The index number selected at step 2 is used in further configuration at section 3.5 Copyright 2013 by Alcatel-Lucent. All rights reserved page 12/28

13 3.3 Internal Numbering Plan Accessible from OMC Numbering -> Numbering Plans menu, the internal numbering plan is the place where dialing of internal phones is first analyzed by the system. The example configuration here defines access to the internal ARS table for a number dialed that starts with digit 0. The Drop value associated indicates that the number analysis must be continued in the ARS Prefix table without keeping the initial digit Traffic Sharing and Barring (reminder) Though not described here, correct configuration of traffic sharing, barring and feature rights mechanisms is necessary to allow call features and outbound traffic over the SIP trunk. 3.5 ARS context associated to the SIP Trunk In-depth configuration of the SIP trunk is carried out via the ARS context associated to the trunk ARS Trunk Groups Lists To enable voice calls via the ARS system, it s necessary to have ARS Trunk Groups created via the OMC menu Numbering -> Automatic Routing Selection -> Trunk Groups Lists. In this menu, new lines are created after clicking mouse right button and selecting Add function Copyright 2013 by Alcatel-Lucent. All rights reserved page 13/28

14 Carry out the selections and push-button steps 1 to 5 above. At step 4, you need to select the line index corresponding to a System Trunk Group previously defined at section (i.e. selecting 4a for the Main Trunk Group or 4b for the secondary Trunk Group of index #2) Gateway/ Registrar Proxy parameters The OMC menu Numbering Automatic Routing Selection Gateway Parameters permits to define parameters for SIP Registration and Outbound Proxy (e.g. proxy, realm, domain, authentication). The screen also permits to select the operation mode to use in front of the remote GW: resolution (static or DNS) and Fax (T38 or G711 pass-thru). Copyright 2013 by Alcatel-Lucent. All rights reserved page 14/28

15 In the picture above, the gateway at index 1 is configured to be associated to the SIP trunk - Set GW parameters (part 1) as follows: Login : GW_Login_example = "+3329***4330@sip.osp.com" Password : GW_Password = "*******" Domain Name : GW_Target_Domain = "sip.osp.com" Realm : RFC 3325 : GW_Realm = "sip.osp.com" GW_RFC3325 = Yes Remote SIP Port : GW_Remote_SIP_Port = Dynamic (see Note below) SIP Numbers.. : index number 1 shown as example (detailed at Ch ) Default value of Remote SIP port is After completing the further parameters, this value will automatically change to Dynamic after the parameter DNS is set to DNS SRV. - Set GW parameters (part 2) as follows: DNS : GW_DNS_Mode = DNSSRV Primary DNS... : GW_Prim_DNS = " " Secondary DNS : GW_Sec_DNS = " " Outbound Proxy : Fax : Registration Req. : GW_Outb_Proxy = "imspcf211gm.sip.osp.com" GW_Fax_Mode = G711 GW_Reg_Requested = Yes Registered Usern.. : GW_Reg_Username_example = "+3329***4330 Copyright 2013 by Alcatel-Lucent. All rights reserved page 15/28

16 Gateway Parameters (right part) sip.osp.com 3600 sip.osp.com Set GW parameters (part 3) as follows: Registrar IP.. : GW_Reg_IP_Address = (see Note after) Port : GW_Reg_Port = "5060" Registrar Name : GW_Reg_Name = "sip.osp.com" Expire Time : GW_Reg_Expire_Time = "3600" Local Domain.. : GW_Local_Domain_Name = "sip.osp.com" - The Registrar IP Address is automatically set to blank when DNS parameter is set to DNS SRV. - The IPBX registration (status and logs) can be checked in OMC History&Anomalies History Table. Copyright 2013 by Alcatel-Lucent. All rights reserved page 16/28

17 3.5.3 ARS prefixes for remote Gateway with Static-IP Not Applicable. Configuration of dynamic DNS mode described at section is required instead ARS prefixes for remote Gateway with Dynamic-IP The ARS Prefix table is the entry place of the ARS system to start the analysis of dialed numbers. Go to the OMC menu Numbering -> Automatic Routing Selection -> Automatic Routing Prefix. As illustrated in the picture below, you need first to configure the route line for standard calls (national and international): use the Add function to create a new line and then, configure the line parameters as indicated. Note that the parameters relative to the right part of the line are depicted a further in this doc section. Depending on the customer context, you must add several other route lines, each dedicated to a range of special numbers (i.e. short numbers or emergency numbers). Here below is given a more complete example with four Prefixes lines (customized values in area 1 and 2) enabling the routing of all the required public numbers: Copyright 2013 by Alcatel-Lucent. All rights reserved page 17/28

18 (left part) het SIP-GW Dynamic Line 1: standard calls starting with digit 0 (national and international calls) Line 2: for external emergency numbers (e.g.112). This line is linked internally to the country emergency numbers specified in the system flag table EmergNum (refer to Technical Bulletin TC80) Line 3 and 4: for short-format external numbers (country dependent). The complete list of short numbers will require one or several ARS lines depending on the country considered o o Line 3: example for short numbers that begin with digit 3 (e.g. 3611, 3900, ) Line 4: example for short numbers that begin with digit 1 (e.g. 11, , ) In area 2, the Calling and Called/PP fields must be set as shown in the example, in order not to interfere with other SIP parameters for numbering. In area 3 and 4, values must also be respected : Called (ISVPN/..) : ARS_Called_Mode = het Destination : ARS_Destination = SIP-GW Dynamic >=1024 kbit/s Default IP Type : IP Address : ARS_IP_Type = Dynamic (see note below) ARS_IP_Address = N/A (see note below) GW Alive Protocol : ARS_GWalive_Prot = N/A (see note below) GW Alive Timer : ARS_GWalive_Timer = N/A (see note below) Gateway Bandwidth : to be configured according to the customer IP infra (real bandwidth available for VoIP calls) ARS_GW_Bandwidth_example = >=1024 kbit/s Codec/Framing : ARS_Codec_Framing = Default The Gateway Alive Status is modified when OXO performs a contact with the concerned gateway The gateway Parameters Index field is accessible after the Gateway parameters menu is completed (step 3.5.2) After the parameter GW mode is set to DNS SRV at Ch.3.5.2, the field (IP type) is automatically set to Dynamic and the fields,, get disabled. Copyright 2013 by Alcatel-Lucent. All rights reserved page 18/28

19 3.5.5 SIP format of public phone numbers The menu Numbering -> Automatic Routing Selection -> SIP Public Numbering is the place to define which number format is supposed to be received or sent over the SIP trunk. (left part) Canonical + National/International Configuration for outgoing calls - calling number (From): Format : SIPnum_Out_Calling_Format = Canonical Prefix : SIPnum_Out_Calling_Prefix = "+" - Configuration for outgoing calls - called number (To): Format : SIPnum_Out_Called_Format = National/International Prefix : SIPnum_Out_Called_Prefix = "" Short Prefix : SIPnum_Out_Called_Short_Prefix = "" - Configuration for Incoming calls - calling number (From): Format : SIPnum_Inc_Calling_Format = Canonical/International Prefix : SIPnum_Inc_Calling_Prefix = "" - Configuration for Incoming calls - called number (To): Format : SIPnum_Inc_Called_Format = Canonical/International Prefix : SIPnum_Inc_Called_Prefix = "+" - Configuration for Alternative CLIP/COLP for out-calls - calling number (From): Alternative CLIP/COLP... : SIPnum_Alt_CLIP_example = "+" Copyright 2013 by Alcatel-Lucent. All rights reserved page 19/28

20 3.6 VOIP Misc Parameters SIP Timers Go to OMC menu Voice Over IP -> VOIP:Parameters/SIP presented below Check/ Set values as follows: Timer T1 : SIP_Timer_T1 = 1000 Timer T2 : SIP_Timer_T2 = 4000 Number of Retries : SIP_N_Retries = Fax (T38) Not relevant (G711 transparent mode is configured) Copyright 2013 by Alcatel-Lucent. All rights reserved page 20/28

21 3.7 Noteworthy Addresses Some PBX specific tuning may not be accessible directly via dedicated OMC screens. In such case, the tuning is done via internal control parameters (flags) also called Noteworthy addresses or Labels. Access to the system Labels is made with OMC menu System Miscellaneous -> Memory Read/Write. Noteworthy addresses have a customized factory default value which is dependent of the SW installation target selected for OXO (country dependent). The different flags detailed hereafter are key for the configuration of the SIP trunk and therefore they need to be checked/ edited with special care. When a flag needs to be modified, click on the 'modify' then on the 'write' buttons to send the new value to the IPBX. Also, if specified in the document, a further system warm reset may be requested for some of the flags to have the new value taken into account Debug Labels Go to System Miscellaneous ->Memory Read/Write > Debug Labels > and check/ edit values carefully as detailed below. MultAnsRei controls emission of Re-INVITE messages during SDP negotiation Flag_MultAnsRei = 00 VOIPnwaddr is a 100-byte-size table of flags controlling most of the VoIP/SIP config parameters not found within the regular OMC screens. Therefore, special attention must be paid when reading or editing the contents of this table: Copyright 2013 by Alcatel-Lucent. All rights reserved page 21/28

22 000: A : C : : : : : : : : : : : Line 1: Flag_VOIPnwaddr_Line1 = A Line 2: Flag_VOIPnwaddr_Line2 = C Line 3: Flag_VOIPnwaddr_Line3 = Line 4: Flag_VOIPnwaddr_Line4 = Line 5: Flag_VOIPnwaddr_Line5 = Line 6: Flag_VOIPnwaddr_Line6 = Line 7: Flag_VOIPnwaddr_Line7 = Line 8: Flag_VOIPnwaddr_Line8 = A warm reset must be performed after changing any of the values in that table! Copyright 2013 by Alcatel-Lucent. All rights reserved page 22/28

23 3.7.2 Other Labels Go to System Misc ->Memory Read/Write > Other Labels section and configure labels as shown below. DtmfDynPL: Sets the payload value for DTMF Flag_DtmfDynPL = 65 PrefCodec indicates if a particular codec has preference Flag_PrefCodec = PrefFramin indicates the preferred length of RTP packets Flag_PrefFramin = 00 AlCodLst permits to select one specific default codec list Flag_AlCodLst = 16 SIPInDspNm controls display of received CNIP name when receiving a call Flag_SIPInDspNm = 03 SIPOgDspNm controls the CNIP name sent over the network for outgoing calls Flag_SIPOgDspNm = 03 FaxPasCd configures codec pass-through preference for fax G711 (between G711a and G711u) Flag_FaxPasCd = 0F FF VipPuNuA controls the global public/ private numbering model. Value must be set to 00. Flag_VipPuNuA = 00 ExtNuFoVoi controls usage of the Installation Numbers table. Value must be set to 22. Flag_ExtNuFoVoi = 22 SimulIpAlt controls usage of the local dial tone. Flag_SimulIpAlt = 00 INVwSDPtrk controls generating INVITEs with/ without SDP for call scenaree with delayed re-routing. Flag_INVwSDPtrk = 01 Copyright 2013 by Alcatel-Lucent. All rights reserved page 23/28

24 3.8 Miscellaneous Configuration Calling Identity when External Call Forward This configuration permits to define the calling CLIP that is sent by OXO to the forwarded-to destination (case of an incoming external call coming to an internal user who has an external diversion engaged). The control can be made globally for the PBX or extension by extension. From the menu System Misc -> Feature Design, tab Part 1 & tab Part 2; check the parameters: "CLI for external diversion": CLI_Ext_Diversion = true "CLI is diverted party if ext..": CLI_is_Diverted_Party = false CLI is diverted party if external caller CLI for external diversion For one extension taken from the menu Subscribers/Basestation List, check the similar parameter: "CLI is diverted party": CLI_is_Diverted_Party = false CLI is is diverted party Copyright 2013 by Alcatel-Lucent. All rights reserved page 24/28

25 4 SIP trunk Configuration Abstract This chapter gathers the rough value of OXO parameters (three following tables). Table 1 CONFIG PARAMETER VALUE REMARK Item_IP_Infra Main_CPU_IP_Address_example " " Value given as example Def_Router_Address_example " " Value given as example Subnet_Mask_example " " Value given as example Item_System_Numbering_Plans Instal_Number_example "29***4330 Value given as example International_Prefix "00" International_Code "33" Recall_Prefix "0" Intercity_Prefix "0" Intercity_Code_example "" Alternative_System_CLIP_example "" DDI_Range_example " " Value given as example VOIP_Protocol SIP Item_VoIP_General VoIP_Trunk_Channels_example 8 Value given as example RTP_Direct Trunk_Codec_Passthru Phone_Codec_Passthru G711_MOH true false true true IP_QoS_example Value given as example DSP_Echo_Cancel DSP_VAD T38_UDP_Redundancy 1 T38_Fax_Framing 0 true false SIP_Timer_T SIP_Timer_T SIP_N_Retries 6 Public_Trunk true SIP_Trunk_Channels_example 8 Value given as example Trunk_Alternative_CLIP_example 8 Value given as example CLI_Ext_Diversion CLI_is_Diverted_Party true false Item_System_Misc Copyright 2013 by Alcatel-Lucent. All rights reserved page 25/28

26 Table 2 CONFIG PARAMETER VALUE REMARK Item_ARS_Prefixes ARS_Called_Mode het ARS_Destination SIP-GW ARS_IP_Type Dynamic ARS_IP_Address N/A ARS_GWalive_Timer N/A ARS_GWalive_Prot N/A ARS_GW_Bandwidth_example >=1024 kbit/s Value given as example ARS_Codec_Framing Default Item_ARS_GW_Parms GW_Login_example "+3329***4330@sip.osp.com" Example (partially masked) GW_Password "*******" (masked) GW_Target_Domain "sip.osp.com" GW_Realm "" GW_RFC3325 Yes GW_Remote_SIP_Port Dynamic DNS mode => Dynamic GW_DNS_Mode DNSSRV GW_Prim_DNS " " GW_Sec_DNS " " GW_Outb_Proxy "imspcf211gm.sip.osp.com" GW_Fax_Mode G711 GW_Reg_Requested Yes GW_Reg_Username_example "+3329***4330" Example (partially masked) GW_Reg_IP_Address "" N/A GW_Reg_Port "5060" GW_Reg_Name "sip.osp.com" GW_Reg_Expire_Time "3600" GW_Local_Domain_Name "sip.osp.com" Item_ARS_SIP_Public_Numbering_Plan SIPnum_Out_Calling_Format Canonical SIPnum_Out_Calling_Prefix "+" SIPnum_Out_Called_Format National/International SIPnum_Out_Called_Prefix "" SIPnum_Out_Called_Short_Prefix "" SIPnum_Inc_Calling_Format Canonical/International SIPnum_Inc_Calling_Prefix "" SIPnum_Inc_Called_Format Canonical/International SIPnum_Inc_Called_Prefix "+" SIPnum_Alt_CLIP_example "+" Value given as example Copyright 2013 by Alcatel-Lucent. All rights reserved page 26/28

27 Table 3 CONFIG PARAMETER VALUE REMARK Item_System_Flags Flag_VOIPnwaddr_Line A Flag_VOIPnwaddr_Line C Flag_VOIPnwaddr_Line Flag_VOIPnwaddr_Line Flag_VOIPnwaddr_Line Flag_VOIPnwaddr_Line Flag_VOIPnwaddr_Line Flag_VOIPnwaddr_Line Flag_MultAnsRei 00 Flag_VipPuNuA 00 Flag_ExtNuFoVoi 22 Flag_DtmfDynPL 65 Flag_SimulIpAlt 00 Flag_PrefCodec Flag_PrefFramin 00 Flag_AlCodLst 16 Flag_FaxPasCd 0F FF Flag_SIPInDspNm 03 Flag_SIPOgDspNm 03 Flag_INVwSDPtrk 01 Copyright 2013 by Alcatel-Lucent. All rights reserved page 27/28

28 Follow us on Facebook and Twitter Stay tuned on our Facebook and Twitter channels where we inform you about : New software releases New technical communications AAPP InterWorking Reports Newsletter Etc. twitter.com/aluenterprisecare facebook.com/alecustomercare Submitting a Service Request Please connect to our eservice application at : Before submitting a Service Request, make sure that : In case a Third-Party application is involved, that application has been certified via the AAPP You have read through the Release Notes which lists new features available, system requirements, restrictions etc. available in the Technical Knowledge Base You have read through the Troubleshooting Guides and Technical Bulletins relative to this subject available in the Technical Knowledge Base - END OF DOCUMENT -

SIP TRUNK SOLUTION: OBS-BIV (FR) CONFIGURATION GUIDELINE R900

SIP TRUNK SOLUTION: OBS-BIV (FR) CONFIGURATION GUIDELINE R900 Technical Bulletin Alcatel-Lucent OmniPCX Office Release 900 SIP TRUNK SOLUTION: OBS-BIV (FR) CONFIGURATION GUIDELINE R900 This document details the configuration necessary on the IPBX ALCATEL-LUCENT OXO

More information

SIP TRUNK SOLUTION: OPENIP (FR) CONFIGURATION GUIDELINE R920

SIP TRUNK SOLUTION: OPENIP (FR) CONFIGURATION GUIDELINE R920 Technical Bulletin Alcatel-Lucent OmniPCX Office Release 920 SIP TRUNK SOLUTION: OPENIP (FR) CONFIGURATION GUIDELINE R920 This document details how to set up an OXO R920 IPBX for enabling a public SIP

More information

SIP TRUNK SOLUTION: ADD-ON TELECOM (FR) CONFIGURATION GUIDELINE R910

SIP TRUNK SOLUTION: ADD-ON TELECOM (FR) CONFIGURATION GUIDELINE R910 Technical Bulletin Alcatel-Lucent OmniPCX Office Release 910 SIP TRUNK SOLUTION: ADD-ON TELECOM (FR) CONFIGURATION GUIDELINE R910 This document details the configuration necessary on the IPBX ALCATEL-LUCENT

More information

SIP TRUNK SOLUTION: SUNRISE (CH) CONFIGURATION GUIDELINE R920

SIP TRUNK SOLUTION: SUNRISE (CH) CONFIGURATION GUIDELINE R920 Technical Bulletin Alcatel-Lucent OmniPCX Office Release 920 SIP TRUNK SOLUTION: SUNRISE (CH) CONFIGURATION GUIDELINE R920 This document details how to set up an OXO R920 IPBX for enabling a public SIP

More information

SIP TRUNK SOLUTION PEOPLEFONE (CH): CONFIGURATION GUIDELINE RCE101

SIP TRUNK SOLUTION PEOPLEFONE (CH): CONFIGURATION GUIDELINE RCE101 Technical Bulletin Alcatel-Lucent OmniPCX Office R10.1 SIP TRUNK SOLUTION PEOPLEFONE (CH): CONFIGURATION GUIDELINE RCE101 This document details how to set up an IPBX OXO RCE101 for enabling a public SIP

More information

SIP TRUNK SOLUTION OVH (FR): CONFIGURATION GUIDELINE RCE100

SIP TRUNK SOLUTION OVH (FR): CONFIGURATION GUIDELINE RCE100 Technical Bulletin Alcatel-Lucent OmniPCX Office R10.0 SIP TRUNK SOLUTION OVH (FR): CONFIGURATION GUIDELINE RCE100 This document details how to set up an IPBX OXO RCE100 for enabling a public SIP trunk

More information

Alcatel-Lucent OXO Configuration Guide. For Use with AT&T s IP Flexible Reach Service. Version 1 / Issue 1 Date July 28, 2009

Alcatel-Lucent OXO Configuration Guide. For Use with AT&T s IP Flexible Reach Service. Version 1 / Issue 1 Date July 28, 2009 Alcatel-Lucent OmniPCX Office R7.1 Configuration Guide For Use with AT&T s IP Flexible Reach Service Version 1 / Issue 1 Date July 28, 2009 www.alcatel-lucent.com AT&T IP Flexible Reach TABLE OF CONTENTS

More information

Extended communication server 4.1 : VoIP SIP service administration

Extended communication server 4.1 : VoIP SIP service administration Extended communication server 4.1 : VoIP SIP service administration May, 2008 Alcatel-Lucent Office Offer - All Rights Reserved Alcatel-Lucent 2007 This document explains how to configure the ECS VOIP

More information

Alcatel-Lucent OmniPCX Office R8.1 Maintenance Software

Alcatel-Lucent OmniPCX Office R8.1 Maintenance Software Alcatel-Lucent OmniPCX Office R8.1 Maintenance Software Software version: System 810/051.001 OMC 810/26.1a This document lists the correction delta between the maintenance software and the Technical Released

More information

SIP Trunking Quick Reference Document

SIP Trunking Quick Reference Document SIP Trunking Quick Reference Document Publication Information SAMSUNG TELECOMMUNICATIONS AMERICA reserves the right without prior notice to revise information in this publication for any reason. SAMSUNG

More information

Mediatrix 4404 Step by Step Configuration Guide June 22, 2011

Mediatrix 4404 Step by Step Configuration Guide June 22, 2011 Mediatrix 4404 Step by Step Configuration Guide June 22, 2011 Proprietary 2011 Media5 Corporation Table of Contents First Steps... 3 Identifying your MAC Address... 3 Identifying your Dynamic IP Address...

More information

Setup Reference guide

Setup Reference guide Setup Reference guide for KX-NS1000 to E1 PRI/R2 Gateway interconnection Panasonic PBX (KX-NS1000 series), Media5 Digital Gateway 3631(Mediatrix 3000 series) Revision 0.2(PSNJ) October.14, 2012 Attention:

More information

AT&T IP Flex Reach/ IP Toll Free Configuration Guide IC 3.0 with Interaction SIP Proxy

AT&T IP Flex Reach/ IP Toll Free Configuration Guide IC 3.0 with Interaction SIP Proxy INTERACTIVE INTELLIGENCE AT&T IP Flex Reach/ IP Toll Free Configuration Guide IC 3.0 with Interaction SIP Proxy Version 1.7 9/2/2009 TABLE OF CONTENTS 1 AT&T... 5 1.1 Introduction... 5 1.2 Product Descriptions...

More information

SIP Trunking Service Configuration Guide for Skype

SIP Trunking Service Configuration Guide for Skype SIP Trunking Service Configuration Guide for Skype NDA-31154 Issue 1.0 NEC Corporation of America reserves the right to change the specifications, functions, or features at any time without notice. NEC

More information

How to Configure the Toshiba Strata CIX for use with Integra Telecom SIP Solutions

How to Configure the Toshiba Strata CIX for use with Integra Telecom SIP Solutions How to Configure the Toshiba Strata CIX for use with Integra Telecom SIP Solutions Overview: This document provides a reference for configuration of the Toshiba Strata CIX IP PBX to connect to Integra

More information

nexvortex Setup Guide

nexvortex Setup Guide nexvortex Setup Guide CISCO UC500 March 2012 Introduction This document is intended only for nexvortex customers and resellers as an aid to setting up the Cisco PBX software to connect to the nexvortex

More information

Link Gate SIP. (Firmware version 1.20)

Link Gate SIP. (Firmware version 1.20) Link Gate SIP (Firmware version 1.20) User guide v1.0 1 Content 2 1. Technical parameters - Dimensions 133 x 233 x 60 mm - Weight 850 g - Operating position various - Operating condition temperature: +5

More information

SIP Trunking Service Configuration Guide for Time Warner Cable Business Class

SIP Trunking Service Configuration Guide for Time Warner Cable Business Class SIP Trunking Service Configuration Guide for Time Warner Cable Business Class NDA-31669 Issue 1.0 NEC Corporation of America reserves the right to change the specifications, functions, or features at

More information

Application Notes for Avaya IP Office 7.0 Integration with Skype Connect R2.0 Issue 1.0

Application Notes for Avaya IP Office 7.0 Integration with Skype Connect R2.0 Issue 1.0 Avaya Solution & Interoperability Test Lab Application Notes for Avaya IP Office 7.0 Integration with Skype Connect R2.0 Issue 1.0 Abstract These Application Notes describe the steps to configure an Avaya

More information

Technical Configuration Notes

Technical Configuration Notes MITEL SIPCoE Technical Configuration Notes Configure Inn-Phone SIP Phone for use with MCD SIP CoE NOTICE The information contained in this document is believed to be accurate in all respects but is not

More information

SIP Trunking using Optimum Business SIP Trunk Adaptor and the Panasonic KX-NCP500 IP PBX V2.0502

SIP Trunking using Optimum Business SIP Trunk Adaptor and the Panasonic KX-NCP500 IP PBX V2.0502 PANASONIC SIP Trunking using Optimum Business SIP Trunk Adaptor and the Panasonic KX-NCP500 IP PBX V2.0502 Goal The purpose of this configuration guide is to describe the steps needed to configure the

More information

SIP Trunking Service Configuration Guide for Broadvox Fusion

SIP Trunking Service Configuration Guide for Broadvox Fusion Notice Note that when converting this document from its original format to a.pdf file, some minor font and format changes may occur. When viewing and printing this document, we cannot guarantee that your

More information

SIP Trunking Application Notes V1.3

SIP Trunking Application Notes V1.3 SIP Trunking Application Notes V1.3 Publication Information SAMSUNG TELECOMMUNICATIONS AMERICA reserves the right without prior notice to revise information in this publication for any reason. SAMSUNG

More information

Application Note Configuring the Synapse SB67070 SIP Gateway for Broadvox GO! SIP Trunking

Application Note Configuring the Synapse SB67070 SIP Gateway for Broadvox GO! SIP Trunking Configuring the Synapse SB67070 SIP Gateway for Broadvox GO! SIP Trunking 2012 Advanced American Telephones. All Rights Reserved. AT&T and the AT&T logo are trademarks of AT&T Intellectual Property licensed

More information

Mediatrix 3000 with Asterisk June 22, 2011

Mediatrix 3000 with Asterisk June 22, 2011 Mediatrix 3000 with Asterisk June 22, 2011 Proprietary 2011 Media5 Corporation Table of Contents Introduction... 3 Network Topology... 3 Equipment Detail... 3 Configuration of the Fax Extension... 4 Configuration

More information

Technical Configuration Notes

Technical Configuration Notes MITEL SIP CoE Technical Configuration Notes Configure MCD for use with OpenIP SIP Trunking service SIP CoE 11-4940-00186 NOTICE The information contained in this document is believed to be accurate in

More information

Configuring Avaya IP Office 500 for Spitfire SIP Trunks

Configuring Avaya IP Office 500 for Spitfire SIP Trunks Configuring Avaya IP Office 500 for Spitfire SIP Trunks This document is a guideline for configuring Spitfire SIP trunks onto Avaya IP Office 500 and includes the settings required for Inbound DDI routing

More information

SIP Trunking Service Configuration Guide for MegaPath

SIP Trunking Service Configuration Guide for MegaPath Notice Note that when converting this document from its original format to a.pdf file, some minor font and format changes may occur. When viewing and printing this document, we cannot guarantee that your

More information

SIP Trunking Service Configuration Guide for PAETEC (Broadsoft Platform)

SIP Trunking Service Configuration Guide for PAETEC (Broadsoft Platform) Notice Note that when converting this document from its original format to a.pdf file, some minor font and format changes may occur. When viewing and printing this document, we cannot guarantee that your

More information

SV9100 SIP Trunking Service Configuration Guide for Time Warner Cable Business Class

SV9100 SIP Trunking Service Configuration Guide for Time Warner Cable Business Class SV9100 SIP Trunking Service Configuration Guide for Time Warner Cable Business Class NDA-31660 Issue 1.0 NEC Corporation of America reserves the right to change the specifications, functions, or features

More information

FortiVoice. Version 7.00 VoIP Configuration Guide

FortiVoice. Version 7.00 VoIP Configuration Guide FortiVoice Version 7.00 VoIP Configuration Guide FortiVoice Version 7.00 VoIP Configuration Guide Revision 2 14 October 2011 Copyright 2011 Fortinet, Inc. All rights reserved. Contents and terms are subject

More information

VoIP Network Configuration Guide

VoIP Network Configuration Guide The owner friendly phone system for small business VoIP Network Configuration Guide Release 7.10 Copyright 2011 Fortinet, Inc. All rights reserved. Fortinet, FortiGate, FortiGuard, FortiCare, FortiManager,

More information

SIP Trunking using the EdgeMarc Network Services Gateway and the Mitel 3300 ICP IP-PBX

SIP Trunking using the EdgeMarc Network Services Gateway and the Mitel 3300 ICP IP-PBX June 26th, 2014 SIP Trunking using the EdgeMarc Network Services Gateway and the Mitel 3300 ICP IP-PBX Page 1 of 30 Table of Contents 1 Overview... 3 2 Prerequisites... 3 3 Network Topology... 4 4 Description

More information

Avaya IP Office 8.1 Configuration Guide

Avaya IP Office 8.1 Configuration Guide Avaya IP Office 8.1 Configuration Guide Performed By tekvizion PVS, Inc. Contact: 214-242-5900 www.tekvizion.com Revision: 1.1 Date: 10/14/2013 Copyright 2013 by tekvizion PVS, Inc. All Rights Reserved.

More information

Application Notes for BT Wholesale/HIPCOM SIP Trunk Service and Avaya IP Office 8.0 Issue 1.0

Application Notes for BT Wholesale/HIPCOM SIP Trunk Service and Avaya IP Office 8.0 Issue 1.0 Avaya Solution & Interoperability Test Lab Application Notes for BT Wholesale/HIPCOM SIP Trunk Service and Avaya IP Office 8.0 Issue 1.0 Abstract These Application Notes describe the procedures for configuring

More information

Extended communication server: Fax Server- Administration

Extended communication server: Fax Server- Administration Extended communication server: Fax Server- Administration OCTOBER, 2008 Alcatel-Lucent Office Offer - All Rights Reserved Alcatel-Lucent 2008 8AL 90403 USAA ed.01 This document explains how to install

More information

Installation and setup guide V 1.0

Installation and setup guide V 1.0 V o I P G S M G A T E BlueGate SIP 1 Installation and setup guide V 1.0 1. General description 1.1 Technical parametres Dimensions 100 x 130 x 37 mm Weight 850 g Operating position various Operating condition

More information

Configuration Notes 290

Configuration Notes 290 Configuring Mediatrix 41xx FXS Gateway with the Asterisk IP PBX System June 22, 2011 Proprietary 2011 Media5 Corporation Table of Contents Introduction... 3 About Mediatrix 41xx Series FXS Gateways...

More information

IP Office Technical Tip

IP Office Technical Tip IP Office Technical Tip Tip no: 188 Release Date: September 27, 2007 Region: GLOBAL Verifying IP Office SIP Trunk Operation IP Office back-to-back SIP Line testing IP Office Release 4.0 supports SIP trunking.

More information

Configuration Guide for connecting the Eircom Advantage 4800/1500/1200 PBXs to the Eircom SIP Voice platform.

Configuration Guide for connecting the Eircom Advantage 4800/1500/1200 PBXs to the Eircom SIP Voice platform. Configuration Guide for connecting the Eircom Advantage 4800/1500/1200 PBXs to the Eircom SIP Voice platform. 1 Contents Introduction.... 3 Installing the Applications Module... 4 Ordering a Licence for

More information

How to Configure the NEC SV8100 for use with Integra Telecom SIP Solutions

How to Configure the NEC SV8100 for use with Integra Telecom SIP Solutions How to Configure the NEC SV8100 for use with Integra Telecom SIP Solutions Overview: This document provides a reference for configuration of the NEC SV8100 IP PBX to connect to Integra Telecom SIP trunks.

More information

Cisco Unified Communications 500 Series

Cisco Unified Communications 500 Series Cisco Unified Communications 500 Series IP PBX Provisioning Guide Version 1.0 Last Update: 02/14/2011 Page 1 DISCLAIMER The attached document is provided as a basic guideline for setup and configuration

More information

Application Notes for Configuring Avaya IP Office 9.0 with HIPCOM SIP Trunk Issue 1.0

Application Notes for Configuring Avaya IP Office 9.0 with HIPCOM SIP Trunk Issue 1.0 Avaya Solution & Interoperability Test Lab Application Notes for Configuring Avaya IP Office 9.0 with HIPCOM SIP Trunk Issue 1.0 Abstract These Application Notes describe the procedures for configuring

More information

Setup Reference guide for PBX to SBC interconnection

Setup Reference guide for PBX to SBC interconnection Setup Reference guide for PBX to SBC interconnection Method of connection by "LAN interface only" i.e. SBC is placed behind the Perimeter Router / Fire-wall. Panasonic PBX (KX-TDE, NCP series), Media5

More information

nexvortex SIP Trunking Implementation & Planning Guide V1.5

nexvortex SIP Trunking Implementation & Planning Guide V1.5 nexvortex SIP Trunking Implementation & Planning Guide V1.5 510 S PRING S TREET H ERNDON VA 20170 +1 855.639.8888 Introduction Welcome to nexvortex! This document is intended for nexvortex Customers and

More information

VoIP Application Note:

VoIP Application Note: VoIP Application Note: Configure NEC UX5000 w/ BroadVox SIP Trunking Service P/N 0913226 Date: 8/12/09 Table of Contents: GOAL... 3 PREREQUISITES... 3 SIP TRUNKING INFORMATION PROVIDED BY BROADVOX:...

More information

CyberData VoIP V2 Speaker with VoIP Clock Kit Configuration Guide for OmniPCX Enterprise

CyberData VoIP V2 Speaker with VoIP Clock Kit Configuration Guide for OmniPCX Enterprise CyberData VoIP V2 Speaker with VoIP Clock Kit Configuration Guide for OmniPCX Enterprise CyberData Corporation 2555 Garden Road Monterey, CA 93940 T:831-373-2601 F: 831-373-4193 www.cyberdata.net 2 Introduction

More information

BroadSoft Partner Configuration Guide SIP Access Device Configuration Sonus Networks, Inc. SBC 1000 / SBC 2000

BroadSoft Partner Configuration Guide SIP Access Device Configuration Sonus Networks, Inc. SBC 1000 / SBC 2000 BroadSoft Partner Configuration Guide SIP Access Device Configuration Sonus Networks, Inc. SBC 1000 / SBC 2000 September 2014 Document Version 1.0 9737 Washingtonian Boulevard, Suite 350 Gaithersburg,

More information

SIP Trunk Configuration Guide. using

SIP Trunk Configuration Guide. using SIP Trunk Configuration Guide using www.cbeyond.net 1-877-441-9783 The information contained in this document is specific to setting up SIP connections between Vertical SBX IP 320 and Cbeyond. If you require

More information

OpenScape Business. Tutorial Networking OpenScape Business OpenScape Voice Configuration Guide. Version: 1.0

OpenScape Business. Tutorial Networking OpenScape Business OpenScape Voice Configuration Guide. Version: 1.0 OpenScape Business Tutorial Networking OpenScape Business OpenScape Voice Configuration Guide Version: 1.0 Contents 1.1. GENERAL... 4 1.1.1. Prerequisites... 4 1.1.2. Features and Restrictions in Networking...

More information

Background 1 Table 1 Software & Firmware Versions Tested 1 Figure 1 Integra s Universal Access (UA) IP PBX Test Configuration 1

Background 1 Table 1 Software & Firmware Versions Tested 1 Figure 1 Integra s Universal Access (UA) IP PBX Test Configuration 1 1 Background 1 Table 1 Software & Firmware Versions Tested 1 Figure 1 Integra s Universal Access (UA) IP PBX Test Configuration 1 Configuration Data 2 Section 1: Initial IPitomy IP PBX Connection & Login

More information

Configuring for Integra Telecom SIP Solutions

Configuring for Integra Telecom SIP Solutions February 2013 Configuring for Integra Telecom SIP Solutions Section Title Page Background 1 Table 1 Software & Firmware Versions Tested 1 Figure 1 Generic IP PBX Test Configuration (with Transparent SIP

More information

SIP Trunking using Optimum Business Sip Trunk Adaptor and the Zultys MX250 IP PBX

SIP Trunking using Optimum Business Sip Trunk Adaptor and the Zultys MX250 IP PBX SIP Trunking using Optimum Business Sip Trunk Adaptor and the Zultys MX250 IP PBX Table of Contents Goal 3 Prerequisites 3 Zultys MX250 Configuration 4 Network Settings 4 Phone Registration and Assignment

More information

Application Notes for Configuring Intelepeer SIP Trunking with Avaya IP Office 7.0 - Issue 1.0

Application Notes for Configuring Intelepeer SIP Trunking with Avaya IP Office 7.0 - Issue 1.0 Avaya Solution & Interoperability Test Lab Application Notes for Configuring Intelepeer SIP Trunking with Avaya IP Office 7.0 - Issue 1.0 Abstract These Application Notes describe the procedures for configuring

More information

SIP Trunking using Optimum Business SIP Trunk Adaptor and the Cisco Call Manager Express Version 8.5

SIP Trunking using Optimum Business SIP Trunk Adaptor and the Cisco Call Manager Express Version 8.5 CISCO SIP Trunking using Optimum Business SIP Trunk Adaptor and the Cisco Call Manager Express Version 8.5 Goal The purpose of this configuration guide is to describe the steps needed to configure the

More information

Time Warner ITSP Setup Guide

Time Warner ITSP Setup Guide October 14 Time Warner ITSP Setup Guide Author: Zultys Technical Support This configuration guide was created to assist knowledgeable vendors with configuring the Zultys MX Phone System with Time Warner

More information

Setup Reference Guide for KX-NS1000 to SBC SIP Trunking

Setup Reference Guide for KX-NS1000 to SBC SIP Trunking Setup Reference Guide for KX-NS1000 to SBC SIP Trunking Method of connection by "WAN Global IP address directly" (i.e. SBC is the Perimeter Router device.) Panasonic IP-PBX (KX-NS1000 Version2 series),

More information

Application Notes Rev. 1.0 Last Updated: February 3, 2015

Application Notes Rev. 1.0 Last Updated: February 3, 2015 SBC 1000/2000 Series Configuration Guide with Cisco Unified Call Manager v8.6 for Level 3 Voice Complete SM Deployments Application Notes Rev. 1.0 Last Updated: February 3, 2015 Contents 1 Document Overview...

More information

Fonality. Optimum Business Trunking and the Fonality Trixbox Pro IP PBX Standard Edition V4.1.2- p13 Configuration Guide

Fonality. Optimum Business Trunking and the Fonality Trixbox Pro IP PBX Standard Edition V4.1.2- p13 Configuration Guide Fonality Optimum Business Trunking and the Fonality Trixbox Pro IP PBX Standard Edition V4.1.2- p13 Configuration Guide Fonality Table of Contents 1. Overview 2. SIP Trunk Adaptor Set-up Instructions 3.

More information

Application Note. IP8000 Conference Phone Configuration Guide. Table of Contents. Overview. Requirements. ST-10010 October 25, 2007

Application Note. IP8000 Conference Phone Configuration Guide. Table of Contents. Overview. Requirements. ST-10010 October 25, 2007 Application Note ST-10010 October 25, 2007 IP8000 Conference Phone Configuration Guide This application note provides the details on adding the IP8000 conference phone to the ShoreTel IP phone system.

More information

VOIP NETWORK CONFIGURATION GUIDE RELEASE 6.10

VOIP NETWORK CONFIGURATION GUIDE RELEASE 6.10 TALKSWITCH DOCUMENTATION VOIP NETWORK CONFIGURATION GUIDE RELEASE 6.10 CT.TS005.002606 ANSWERS WITH INTELLIGENCE INTRODUCTION About this guide This guide will help you plan and configure a TalkSwitch system

More information

MAGIC TH6. System Configuration SW Version 2.000

MAGIC TH6. System Configuration SW Version 2.000 MAGIC TH6 System Configuration SW Version 2.000 1 Basic Settings Starting the Windows PC Software Line interface settings Operating Mode Audio lines Hold Signal Signal Processing Database Connection 2

More information

Application Notes for Configuring SIP Trunking between Metaswitch MetaSphere CFS and Avaya IP Office Issue 1.0

Application Notes for Configuring SIP Trunking between Metaswitch MetaSphere CFS and Avaya IP Office Issue 1.0 Avaya Solution & Interoperability Test Lab Application Notes for Configuring SIP Trunking between Metaswitch MetaSphere CFS and Avaya IP Office Issue 1.0 Abstract These Application Notes describe the steps

More information

Digium Switchvox AA65 PBX Configuration

Digium Switchvox AA65 PBX Configuration Digium Switchvox SIP Trunking using Optimum Business SIP Trunk Adaptor and the Digium Switchvox AA65 IP-PBX v23695 Goal The purpose of this configuration guide is to describe the steps needed to configure

More information

TELEPHONE MAN OF AMERICA. Earning Your Business Every Step of the Way!

TELEPHONE MAN OF AMERICA. Earning Your Business Every Step of the Way! TELEPHONE MAN OF AMERICA Earning Your Business Every Step of the Way! Specializing in Telecom Equipment of all Brands, Carrier Services, Technician Services, Maintenance Agreements & Purchasing Excess

More information

Setup Reference Guide for KX-TDE/NCP to SBC SIP Trunking

Setup Reference Guide for KX-TDE/NCP to SBC SIP Trunking Setup Reference Guide for KX-TDE/NCP to SBC SIP Trunking Method of connection by "WAN Global IP address directly" (i.e. SBC is the Perimeter Router device.) Panasonic IP-PBX (KX-TDE/NCP Version6 series),

More information

BROADSOFT PARTNER CONFIGURATION GUIDE VEGASTREAM VEGA 100

BROADSOFT PARTNER CONFIGURATION GUIDE VEGASTREAM VEGA 100 BROADSOFT PARTNER CONFIGURATION GUIDE VEGASTREAM VEGA 100 JULY 2005 Version 1.0 BroadWorks Guide Copyright Notice Copyright 2005 BroadSoft, Inc. All rights reserved. Any technical documentation that is

More information

Quick Start Guide v1.0

Quick Start Guide v1.0 Quick Start Guide v1.0 Table of contents : 01. Quick Start Guide...03 O2. Configuring your VoIPOffice appliance...14 03. Adding a VoIPtalk trunk...21 04. Configuring UADs for use with VoIPOffice...25 05.

More information

Application Notes Rev. 1.0 Last Updated: January 9, 2015

Application Notes Rev. 1.0 Last Updated: January 9, 2015 SBC 1000/2000 Series Configuration Guide with Cisco Unified Call Manager v9.1 for Level 3 Voice Complete SM SIP Trunk Deployments Application Notes Rev. 1.0 Last Updated: January 9, 2015 Contents 1 Document

More information

MITEL SIP CoE. Technical. Configuration Note. Configure MCD for use with Intelepeer Service provider SIP Trunking. SIP CoE 14-4940-00313

MITEL SIP CoE. Technical. Configuration Note. Configure MCD for use with Intelepeer Service provider SIP Trunking. SIP CoE 14-4940-00313 MITEL SIP CoE Technical Configuration Note Configure MCD for use with Intelepeer Service provider SIP Trunking SIP CoE 14-4940-00313 NOTICE The information contained in this document is believed to be

More information

Application Notes for Configuring Broadvox SIP Trunking with Avaya IP Office - Issue 1.0

Application Notes for Configuring Broadvox SIP Trunking with Avaya IP Office - Issue 1.0 Avaya Solution & Interoperability Test Lab Application Notes for Configuring Broadvox SIP Trunking with Avaya IP Office - Issue 1.0 Abstract These Application Notes describe the procedures for configuring

More information

SIP Trunking with Elastix. Configuration Guide for Matrix SETU VTEP

SIP Trunking with Elastix. Configuration Guide for Matrix SETU VTEP SIP Trunking with Elastix Configuration Guide for Matrix SETU VTEP Contents Setup Diagram 3 SIP Trunk Configuration in Elastix for SETU VTEP 4 Outgoing Call configuration in Elastix 7 Incoming call configuration

More information

nexvortex Setup Template

nexvortex Setup Template nexvortex Setup Template ZULTYS, INC. April 2013 5 1 0 S P R I N G S T R E E T H E R N D O N V A 2 0 1 7 0 + 1 8 5 5. 6 3 9. 8 8 8 8 Introduction This document is intended only for nexvortex customers

More information

Technical Configuration Notes

Technical Configuration Notes MITEL SIPCoE Technical Configuration Notes Configure the MCD 6.0 for use with the Commend SIP Doorphone SIP CoE 13-4940-00251 NOTICE The information contained in this document is believed to be accurate

More information

Optimum Business SIP Trunk Set-up Guide

Optimum Business SIP Trunk Set-up Guide Optimum Business SIP Trunk Set-up Guide For use with IP PBX only. SIPSetup 07.13 FOR USE WITH IP PBX ONLY Important: If your PBX is configured to use a PRI connection, do not use this guide. If you need

More information

SIP Trunking using Optimum Business SIP Trunk Adaptor and the Allworx 6x IP PBX 7.1.6.1

SIP Trunking using Optimum Business SIP Trunk Adaptor and the Allworx 6x IP PBX 7.1.6.1 ALLWORX SIP Trunking using Optimum Business SIP Trunk Adaptor and the Allworx 6x IP PBX 7.1.6.1 Goal The purpose of this configuration guide is to describe the steps needed to configure the Allworx 6x

More information

MITEL SIP CoE Technical. Configuration Note. Configure MCD for use with Thinktel SIP Trunking Service. SIP CoE 12-4940-00197

MITEL SIP CoE Technical. Configuration Note. Configure MCD for use with Thinktel SIP Trunking Service. SIP CoE 12-4940-00197 MITEL SIP CoE Technical Configuration Note Configure MCD for use with SIP Trunking Service SIP CoE NOTICE The information contained in this document is believed to be accurate in all respects but is not

More information

Application Notes for Configuring Cablevision Optimum Voice SIP Trunking with Avaya IP Office - Issue 1.1

Application Notes for Configuring Cablevision Optimum Voice SIP Trunking with Avaya IP Office - Issue 1.1 Avaya Solution & Interoperability Test Lab Application Notes for Configuring Cablevision Optimum Voice SIP Trunking with Avaya IP Office - Issue 1.1 Abstract These Application Notes describe the procedures

More information

MITEL SIP CoE. Technical. Configuration Notes. Configure MCD 6.X for use with babytel SIP trunks. SIP CoE 13-4940-00266

MITEL SIP CoE. Technical. Configuration Notes. Configure MCD 6.X for use with babytel SIP trunks. SIP CoE 13-4940-00266 MITEL SIP CoE Technical Configuration Notes Configure MCD 6.X for use with babytel SIP trunks SIP CoE 13-4940-00266 NOTICE The information contained in this document is believed to be accurate in all respects

More information

#!) * & /! $* - 01 $& -$ 2 1 $& -# 32# $- - + $- -*!45 $-

#!) * & /! $* - 01 $& -$ 2 1 $& -# 32# $- - + $- -*!45 $- ! Version Date Status Owner 1.0 2009-11-09 Released 1.1 2010-01-05 Hints for Fax added Provider hints and new layout 1.2 2010-12-17 Additional hints and corrections 1.3 2011-05-19 Updates for new STUN

More information

How To Connect A Phone To An Ip Trunk On A Cell Phone On A Sim Sim Simlia (Vizon) Or Ip Office (Izon) On A Ppl (Telnet) On An Ip Office Softphone On A Vnet (V

How To Connect A Phone To An Ip Trunk On A Cell Phone On A Sim Sim Simlia (Vizon) Or Ip Office (Izon) On A Ppl (Telnet) On An Ip Office Softphone On A Vnet (V Avaya Solution & Interoperability Test Lab Application Notes for SIP Trunking Using Verizon Business IP Trunk SIP Trunk Service and Avaya IP Office Release 7.0 Issue 1.1 Abstract These Application Notes

More information

IP Telephony. User Guide. System SPA9000. Model No. Voice

IP Telephony. User Guide. System SPA9000. Model No. Voice IP Telephony System User Guide Voice Model No. SPA9000 Copyright and Trademarks Specifications are subject to change without notice. Linksys is a registered trademark or trademark of Cisco Systems, Inc.

More information

PAP2 Phone Adapter. Installation Guide OUTBOUND CALLING. Version 1.0. DocVersion: PAP2-IG-v1-0-042805

PAP2 Phone Adapter. Installation Guide OUTBOUND CALLING. Version 1.0. DocVersion: PAP2-IG-v1-0-042805 PAP2 Phone Adapter Installation Guide OUTBOUND CALLING Version 1.0 DocVersion: PAP2-IG-v1-0-042805 All Rights Reserved Copyright 2005 The use, disclosure, modification, transfer, or transmittal of this

More information

Abstract. Avaya Solution & Interoperability Test Lab

Abstract. Avaya Solution & Interoperability Test Lab Avaya Solution & Interoperability Test Lab Application Notes for Configuring SIP Trunking between the Verizon Business VoIP Service with IP Trunking and Avaya Communication Manager Branch Edition Issue

More information

Technical Configuration Notes

Technical Configuration Notes MITEL SIPCoE Technical Configuration Notes Configure Mitel UC360 SIP Phone and Mitel MCD for use with VidyoWay SIP CoE 13-4940-00228 NOTICE The information contained in this document is believed to be

More information

1 SIP Carriers. 1.1.1 Warnings. 1.1.2 Vendor Contact Vendor Web Site : http://www.wind.it. 1.1.3 Versions Verified SIP Carrier status as of 9/11/2011

1 SIP Carriers. 1.1.1 Warnings. 1.1.2 Vendor Contact Vendor Web Site : http://www.wind.it. 1.1.3 Versions Verified SIP Carrier status as of 9/11/2011 1 SIP Carriers 1.1.1 Warnings Check the SIP 3 rd Party SIP Carrier Matrix for certification status, and supported features. More info about the SIP 3 rd Party SIP Carrier Matrix can be found in the SIP

More information

Sample Configuration for SIP Trunking between Avaya IP Office R8.0 and Cisco Unified Communications Manager 8.6.2 Issue 1.0

Sample Configuration for SIP Trunking between Avaya IP Office R8.0 and Cisco Unified Communications Manager 8.6.2 Issue 1.0 Avaya Solution & Interoperability Test Lab Sample Configuration for SIP Trunking between Avaya IP Office R8.0 and Cisco Unified Communications Manager 8.6.2 Issue 1.0 Abstract These Application Notes describe

More information

How To Configure A Linksys Pap2T With Virtualbpx On A Cell Phone On A Pc Or Ipad Or Ipa (For Ipa) On A Ipa Or Ip2T On A Sim Sim (For Sim Sims

How To Configure A Linksys Pap2T With Virtualbpx On A Cell Phone On A Pc Or Ipad Or Ipa (For Ipa) On A Ipa Or Ip2T On A Sim Sim (For Sim Sims Linksys PAP2T Configuration with VirtualPBX The Linksys PAP2T is an inexpensive ATA device that connects to the internet and registers with your Virtual PBX extension, allowing you to use any analog phone

More information

Connecting with Vonage

Connecting with Vonage Connecting with Vonage Vonage (http://www.vonage.com/) offers telephone service using the VoIP (Voice over Internet Protocol) standard SIP (Session Initiation Protocol). The service allow users making

More information

VoIP Telephone Adapter User s Manual

VoIP Telephone Adapter User s Manual VoIP Telephone Adapter User s Manual Last Update: 2008/10/10 1 Introduction...3 1.1 Product Overview (Single Phone Port Model)...3 1.2 Product Overview (Dual Phone Port Model)...4 2 IVR Interface for TA...6

More information

GW400 VoIP Gateway. User s Guide

GW400 VoIP Gateway. User s Guide GW400 VoIP Gateway User s Guide P/N: 956YD30001 Copyright 2006. All Rights Reserved. Document Version: 1.0 All trademarks and trade names are the properties of their respective owners. i Table of Contents

More information

VoIP Router TA G81022MS User Guide

VoIP Router TA G81022MS User Guide VoIP Router TA G81022MS User Guide V. 1.0 TABLE OF CONTENTS TABLE OF CONTENTS...2 1.0 INTRODUCTION...1 2.0 PACKAGE CONTENT...1 3.0 SUMMARY OF LED & CONNECTOR DESCRIPTION...2 3.1 THE FRONT LEDS...2 3.2

More information

1.1.3 Versions Verified SIP Carrier status as of 18 Sep 2014 : validated on CIC 4.0 SU6.

1.1.3 Versions Verified SIP Carrier status as of 18 Sep 2014 : validated on CIC 4.0 SU6. 1 SIP Carriers 1.1 Telstra 1.1.1 Warnings Check the SIP 3 rd Party SIP Carrier Matrix for certification status, and supported features. More info about the SIP 3 rd Party SIP Carrier Matrix can be found

More information

MyIC setup and configuration (with sample configuration for Alcatel Lucent test environment)

MyIC setup and configuration (with sample configuration for Alcatel Lucent test environment) MyIC setup and configuration (with sample configuration for Alcatel Lucent test environment) N.B. Goto MyIC Preferences in the System Toolbar. Description: this may be any appropriate description of the

More information

Version Date Status Owner. 1.0 2009-02-04 Released for HiPath OpenOffice ME V1 F. Kneissl / K.-W. Weigt

Version Date Status Owner. 1.0 2009-02-04 Released for HiPath OpenOffice ME V1 F. Kneissl / K.-W. Weigt History of Change Version Date Status Owner 1.0 2009-02-04 Released for HiPath OpenOffice ME V1 F. Kneissl / K.-W. Weigt 1.1 2010-09-01 Update for OpenScape Office MX V2 and hints for Fax F. Kneissl 1.2

More information

Note: As of Feb 25, 2010 Priority Telecom has not completed FXS verification of fax capabilities. This will be updated as soon as verified.

Note: As of Feb 25, 2010 Priority Telecom has not completed FXS verification of fax capabilities. This will be updated as soon as verified. 1 SIP Carriers 1.1 Priority Telecom 1.1.1 Warnings Check the SIP 3 rd Party SIP Carrier Matrix for certification status, and supported features. More info about the SIP 3 rd Party SIP Carrier Matrix can

More information

Configuring Mitel 3300 for Spitfire SIP Trunks

Configuring Mitel 3300 for Spitfire SIP Trunks Configuring Mitel 3300 for Spitfire SIP Trunks This document is a guideline for configuring Spitfire SIP trunks onto Mitel 3300 and includes the settings required for Inbound DDI routing and Outbound CLI

More information

Application Notes for Configuring Avaya IP Office 8.1 with Colt VoIP Access service Issue 1.0

Application Notes for Configuring Avaya IP Office 8.1 with Colt VoIP Access service Issue 1.0 Avaya Solution & Interoperability Test Lab Application Notes for Configuring Avaya IP Office 8.1 with Colt VoIP Access service Issue 1.0 Abstract These Application Notes describe the procedures for configuring

More information

Application Notes for Configuring SIP Trunking between McLeodUSA SIP Trunking Solution and an Avaya IP Office Telephony Solution 1.

Application Notes for Configuring SIP Trunking between McLeodUSA SIP Trunking Solution and an Avaya IP Office Telephony Solution 1. Avaya Solution & Interoperability Test Lab Application Notes for Configuring SIP Trunking between McLeodUSA SIP Trunking Solution and an Avaya IP Office Telephony Solution 1.0 Abstract These Application

More information