2 Table of Contents 1. Introduction 2. Product Features 3. Usage Scenarios 4. Package Contents 5. Hardware Overview 6. Remote Control 7. Using the i-frame 7.1. Powering i-frame 7.2. Main Menu 8. Settings 9. Remote access 10. Description of system files 11. HOME2 manual monitor adjustment 12. Limited Warranty 2
3 1. Introduction Thank you for purchasing i-frame - high-performance and low-cost digital signage platform with LAN/internet connectivity that allows you to play multimedia content in Full HD quality. The user interface is easy to understand and no additional software is required. Simply insert the memory card or set-up network connection and you can play the media files from selected source. There are following models available i-frame HOME, i-frame HOME2 and i-frame SIGN. i-frame HOME presents standalone device that features wooden frame in size ~50x70cm and full-hd IPS LED panel. It can be used as a standard frame on the wall with very rich digital photoframe features. i-frame HOME2 replaces model HOME. This model is based on 32 professional industry class AMVA panel, it features wooden frame in size ~46x80cm. New construction allows to replace the wooden frame (standard colours black, natural wood, white, cherry brown) very easily and customized to requested design. -Frame HOME2-XL is based on 46 professional industry class AMVA panel, dimension is 110x60cm. i-frame SIGN contains identical electronics as i-frame HOME, the only difference is in missing display which can allow to connect the device to any device that contains HDMI input connector. It is mostly used for in Digital Signage industry, however can be used as well at home and connected to large flat TV devices. The i-frame SIGN can be attached to rear side of TV via VESA standard holes, eventually there is i-frame VESA 200/400mm holder available. For presentation from local or internal memory there is no additional settings necessary, for presentation from intranet or internet (incl. Flickr) you have to set wireless connection with credentials. The i-frame devices are ideal for advertising, retail displays, museum exhibits, galleries, home usage and other applications. The possibility of remote content management via internet without any additional fee and automatic slideshow synchronization with remote source makes it eligible also for maintenance free usage. Just switch it on and the i-frame can start the show automatically. You can use built-in advanced Timers (internet connection required) or any simple programmable outlet timer to switch it on and off at favourite time 3
4 2. Product Features Wireless multimedia device WiFi-N / LAN (HOME2-XL, SIGN) connectivity Supports different multimedia sources Internal memory (1GB), USB/microSD, LAN (SMB/UPnP), Internet, Flickr, FTP, websources... Photo slideshow with music on the background Supported formats VIDEO (MPEG4, MKV,AVI,TS,VOB,MPG, MP4, MOV,3GP...), PICTURE (JPG,BMP,GIF,BMP,TIFF) WWW (ASCII text with filename ABC.www. Each line contains 1 www address.time delay between lines corresponds to the current Delay valid for Slideshow. PLST (Playlist file, ASCII text with filename ABC.plst. Each line contains command for 1 item within Slideshow) IFR system command file ( for internal memory operations - copy, delete...) Built-in HTML5 browser (http+https) able to run in Slideshow or standalone Mix content play (Photo/Video/WWW) Autoplay for all media formats support Slideshow of all sub-directories Landscape / Portrait presentation mode Multiple transition effects, flying text, fixed image (multi-layer system) Remote Slideshow synchronization/update over LAN or internet Full HD resolution with HDMI output, portrait/landscape, 50/60Hz Multi language Centralized remote surveillance of running devices Fan less design (silent operation) and more Usage Scenarios 4 Maintenance and advertisement in public spaces (shops, hospitals..). Operation with remote control over internet (can be used by non-it users e.g. older parents) by other distant person (family). Family then can change the content of Slideshow by adjusting of own Flickr account or via VPN. Connection and all content will be synchronized. Therefore only ON/OFF can be required by local user.
5 Presentations (with description) controlled and monitored from one place (web portal, VPN, Flickr, FTP, SMB). Instant home direct presentation of ALL photos/videos stored in NAS (the most safe and suitable place for photo/video) 4. Package Contents i-frame HOME2 1. i-frame HOME2 device 2. Remote Control 3. User Manual 4. Invisible transparent extension 3m cord i-frame SIGN 1. i-frame SIGN device 2. Remote Control 3. External Infra sensor 4. User Manual 5. Power Adapter 5. Hardware Overview i-frame HOME2 1x USB slot: can be used for USB memory, USB keyboard or USB mouse ( faster data input) 1 x microsd slot: for memory card WiFi antenna: non removable antenna for WiFi b/g/n connectivity Audio out ( L+R), cinch connection Audio in ( L+R), cinch connection LAN RJ-45 port : HOME2-XL only IrDa built in receiver i-frame SIGN 5
6 2x USB slot:. used for USB memory, USB keyboard or USB mouse, USB numbering depends on the insertion order, not USB slot position. 1 x microsd slot: for memory card LAN RJ-45 port: wired Ethernet 10/100Mbps connection (RJ45 connector) HDMI out: Full HD video+audio output (connected to monitor/tv) DC in: DC input from Power adapter (use only supplied adapter) Memory slot protection cover: secured by screws against unauthorised removal. VESA mounting: mount holes 75/100mm on metal case (200/400mm available with adapter optional ) External Infra sensor connector: 2,5 jack connector for external IrDA sensor 6. Remote Control 6 The Remote Control is powered from 1x CR2025 3V battery. To replace the battery, simply press the lock at battery cover and remove the cover with battery.
7 7. Starting the i-frame 7.1. Powering i-frame 1. Connect to power socket, eventually use HDMI video cable to connect i-frame Sign and TV or monitor. 2. With HOME2, check if needed to use manual switch next to power cord, then use RC and power the device. 3. If you want to present from local memory, insert the memory into the USB or microsd slot. All slots are hot-plug, so you can insert the memory also while the device is running. (if you want present from internal memory, it is needed first to copy files there) 7.2. Main Menu The main screen will show up after power on by default. ( if set Autostart ON (not default), the Slideshow will start automatically). Main screen layout consists of 4 regions: 1. System Menu (System settings) (3 dots on the right top) for Device, Network and Display setting update, SW status 7 2. Main Menu Memory internal memory on board, size is 1,3GB.This location is handled via *.ifr system files (explained later) or direct Web access Memory card slots 1xmicroSD, 2xUSB 2.0.,available/inserted memory is highlighted
8 Network media sources for presentation: LAN Network Samba server (standard network storage used in Windows, NAS) UPnP Any available UPnP/DLNA media source within local network Flickr World #1 photo internet cloud storage for your media files (www.flickr.com) WWW html page as defined in WWW option FTP server accessible via File Transfer Protocol History list of recent Slideshow media sources with possibility to run any address (this list makes the future slideshow from different sources very fast to access, it works as bookmarks ). The most recent (top line) is the active source for Autostart. Note:Manual presentations are not stored in the History list, except of www and plst files. The selected Slideshow runs according the current device settings (Delay, Transition,Recursion...). There is a special History item as default that allows to quickly access the 8
9 I-FRAME FLICKR DEMO account. Start Slideshow starts the Slideshow (2 identical locations) 3. Folder selection Browsing and selection of folders and files. Note: when in Folder selection, you get promptly to Main Menu with Left arrow and to Recursive & Start Slideshow with Right arrow 4. Recursive & Start Slideshow Marking the Recursive option allows you to include all files and subfolders in Slideshow. Start Slideshow starts the Slideshow according the selected parameters. The Sideshow can be Paused anytime (OK) and then can continue (OK) or if needed picture rotation, then arrows left/right cause 90degrees rotation (CCW/CW). 8. Settings System Menu is accessible by cursor buttons ( 3 dots in upper right corner) or directly pressing Menu button on RC while being in Main screen. System Settings will show following: Options Detailed settings of i-frame, explained on page 11. Timer options Timers allow to define scenarios how the device will be switched ON/OFF. When Timer scenario is completed then it appears in basic Timers list. Please note Timers relies on TIME&DATE settings from internet, therefore it is needed to have working internet connection. WiFi WiFi is enabled by default and it is needed to set up for 9
10 your WiFi connection. Note: For i-frame SIGN and HOME2-XL the RJ-45 slot can be used as well, default settings is DHCP automatic configuration) For reliable operation of LAN Ethernet connection, it is recommended to disable WiFi access temporarily. Date/Time Settings of current Date/Time, highly recommended settings is Automatic (requires internet connection). Don t forget to set your GMT zone. Note: If you need to adjust a display resolution or orientation, use this option as well and follow Display settings. I-Frame has default 720p output resolution for SIGN and 1080p for HOME2. If your TV/monitor allows using of higher resolution, please set it accordingly (full HD=1080p, HD-ready=720p). Then it is recommended to check the display position and size and eventually to make an adjustment (each output resolution requires separate display adjustment). For certain special conditions, there are 50Hz modes available ( if do not why to use 50Hz, then use 60Hz settings) Here is possible to make a screen rotation (Screen mode) for HOME2 and newer edition of SIGN Internet update i-frame checks the latest firmware version on Internet. Changelog The text file with all firmware revisions history appears. Note as this file is downloaded from server, internet connection is required. Status General information about current i- Frame device. OPTIONS - Display options Delay Time between the consecutive photos during Slideshow ( Range 1sec 100hrs ) 10
11 Layout Layout of the Slideshow defines design of current Slideshow. Following options Fullscreen Dissolve ( default ) Fullscreen Fade in/out Four regions photo can be placed variably into different regions ( various size ) Four regions centered photos are placed equally into 4 regions Random photo placer Four corners Single fly by single photo will come from left side moving Double fly by Random fly by Single fly down Single fly up 11 Transition Here is possible to define style of transition between 2 items in Slideshow. Available following options Dissolve Fade in, fade out Zoom in Zoom out Slide left Slide right Random None Zoom effect
12 Grayscale effect Page turn Blinds Zoom in effect Aspect ratio Selection how the screen will be filled out There are 3 options Default photo is displayed with exact aspect ratio as original Max visible (Aspect ratio preserved) Photo will use maximum of screen with original aspect ratio. The photo will have mostly border region removed, as the screen ratio is 16:9 and photo will not cover full screen Max visible (Aspect ratio changed) photo will cover full screen and is adjusted to the screen aspect ratio (therefore not original). Photo is usually heavily modified. Photo order It defines the order how the files and folders are displayed in folder selection and consequently in Slideshow ( random order appears only during Slideshow) Random selection each presentation is unique as the order will be random Alphabetic order It works for all items ( Folders&Files) Timestamp order order according time information Alphabetic order (keep folder structure) useful for Recursion ON. The order will follow first the directories and then the files. Start opacity It defines how slowly/quickly will be new photo displayed (fade-in). Range 0-255, value 0 means slow appearance, value 255 is instant photo appearance. Mostly not needed to change this value. End opacity It defines how slowly/quickly current photo will disappear (fade-out). Range 0-255, value 0 means slow fade-out, value 255 is instant fade-out. Mostly not needed to change this value. 12 Banner options Enable/disable vertical banner of the display on the right side. There are following submenus o Vertical banner left o Vertical banner right
13 o o o o o o o Horizontal banner top Horizontal banner bottom Text speed RSS loation Background color Text font Color font Horizontal/Vertical banner top/bottom Vertical banner left/right Enable/disable banners around the display. There are following options None banner disabled Fixed image (Device name.jpg) it displays single image during complete Slideshow. This file must be in JPG format and placed in top directory of the Slideshow with identical name as Device name e.g. iframe.jpg Text from file (Device name.txt) it displays the text from ASCII text during complete Slideshow. This file must have TXT extension placed in top directory of the Slideshow with identical name as Device name e.g. iframe.txt (if Device name is iframe ) This option is suitable for horizontal orientation of i-frame device. Clock it displays analogue clock Photo information if there is identical TXT file as current photo (e.g. pic1.jpg and pic1.txt), then this TXT file is displayed with the photo. If there is not such TXT file, the filename and date of the current photo is displayed. This option is suitable for horizontal orientation of i-frame device. RSS the RSS feed is taken according to the RSS location address settings. Text speed If displayed text is longer then screen, then it starts scrolling. Here is possible to select speed of scrolling Very slow Slow Normal Fast Very fast RSS location This field defines the RSS feed address when RSS option for banner selected. Background location 13
14 Here is possible to define background of enabled banner. Available following colours: Black/Blue/Dark gray/gray/green/light gray/magenta/red/white/yellow Text font Here is possible to choose from more then 20 various fonts (normal, bold..) Color font Font settings for text banner. Available following colors: Black/Blue/Dark gray/gray/green/light gray/magenta/red/white/yellow File mask for Slideshow Here is possible to select (a mask) what types of files are visible in Slideshow. Show photos Show videos Show www lists (.www) Show playlists (.plst) The WWW file is plain ASCII text with filename ABC.www (using Notepad.exe in Windows means Saving with ANSI Code page, otherwise there will be added some reserved bytes in the header of the file (Unicode, UTF-8), which could cause problem in processing of first line). Each line contains 1 www address, possible to use short names (w/o http or www). Time delay between lines corresponds to the current Delay valid for Slideshow. The PLST file (Playlist file) is plain ASCII text with filename ABC.plst. Each line contains full command for one item within Slideshow. Full details on PLST specification in Chapter 8 Default settings Date mask for Slideshow Here is possible to select what files are visible within Slideshow, based on Date information. Activate mask type (Disabled, Fixed date, Fixed period) Fixed date (the Slideshow will include files from present date to to the Fixed date as the oldest) Fixed period (the Slideshow will include files within this period only. Example when set 7days, then Slideshow displays files only from last 7 days only. When Reload enabled, then every new day the files beyond 7 14
15 days limit will be excluded from Slideshow and new files from current day will be loaded automatically) Note please check the current date settings (visible in System Menu Date&Time or here in Options Date mask for Slideshow). When no internet connection, device will set current date to default 1/1/1970. This will be modified when internet connection available! Date format Selection of 12hr/24hr time format Enable portrait mode It enables/disables reading of orientation information from EXIF. If selected, all photos are displayed in Portrait mode. Suitable for Slideshow of selected portrait photos. OPTIONS - Network options LAN server As the standard LAN item in menu can search/browse just within current local LAN subnet, this settings is required in following cases 1. Local LAN server, located in the same subnet. Then this option will speed up the availability of this server (typically 1server in home network) 2. Local LAN server located in other subnet. Then this option is the only way how to reach such server (standard LAN/uPNP search/browse can work in single subnet only) 3. Remote LAN server located anywhere on internet. This option is the only way how to reach this server Note: When used for accessing of remote SMB server, it is often necessary to provide/enable the SMB access on remote router/firewall. Standard open ports required for accessing of the Samba shares are 139 and 445, FTP protocol requires port 21. Fixed server IP address of LAN server Username Password Domain (optional) 15 FTP server
16 FTP server IP address of FTP server used for browsing via FTP option in Main Menu. When requested to use special FTP port ( other then 21 ), use syntax IP_FTP_SERVER:port FTP user FTP password Web browser options WWW starts with Homepage (as defined in WWW address) Empty Using WWW menu item in Main Menu will bring empty screen. Within browser using Menu key on Remote Control will open Bookmark Submenu, where is possible to store favourite websites or load website from this list. Other option how to run html pages (even during Slideshow as standard item) is in using of www file from Folder selection. WWW address This URL address of html page will be used with WWW menu item in Main Menu (e.g. html://www.i-frame.net, Preferred WWW desktop version This option enables to display the html page in full desktop mode as preferred. 16 Flickr account name i-frame supports direct access to the Flickr accounts. To be able to view Slideshow from Flickr, it is required first to enter the Flickr web address of desired Flickr Photostream. Note: As there have been considerable positive changes in May regarding Flickr user account policy, generally we can summarize there is up to 1TB free space, up to 60 collection, max 200MB/1 picture, max 1GB/1 video ( up to 3mins duration ). Complete info can be found at To be able to provide the photos for i-frame, it is required to create unique Flickr web_address (You Your_account Your Flickr web address) e.g. In this example, the word naviion is the unique web_address and must be entered in the Flickr account name dialog.
17 This web_address must be entered prior entering Flickr from Main Menu. Flickr quality It defines quality of downloaded/presented pictures from Flickr. There are 3 levels Low = approx VGA quality Medium = approx HD ready quality High = approx Full HD quality As Flickr is providing various formats from the original pictures on the fly upon request of i-frame, the exact format/aspect ratio and resolution is based on original files. Note: Please be aware this selection has significant impact on volume of transferred data from server to i-frame device. Enable reload Synchronization function, for LAN/Flickr/UPnP Slideshow.. It enables/disables reload/synchronization of the current running Slideshow with the remote original Slideshow source. Upon content change on remote server location, the current running Slideshow will be adjusted automatically. Reload interval It defines interval between 2 consecutive controls of server content. Range 1sec 100hrs. Enable reload must be checked. FTP reporting FTP account It defines the i-frame account where is device reporting/monitoring to. Standard scenario Let s create an i-frame account on web portal. Then, enter this account name into this filed. As a result, you can follow then all i-frame devices (separated by unique Device_names see Device name item ) that belong to this account ( grouping ).Now you can get device survey, if running, when being switched on/off, what Slideshow items displayed etc...). Note: First, there must exist such an account on i-frame webportal, if not, start on first. FTP reporting It enables/disables reporting to i-frame.net web portal. FTP server 17
18 Change only when there is request to use CMS portal FTP user / FTP password Credentials for CMS portal. Delay between checks Default 60sec, interval when device communicates with CMS server Include files and folders XML file used for remote communication with CMS server will contain full file listing of all local storage locations (Memory, USB, microsd). It can heavily increase data traffic ( due to high number files and folders) OPTIONS - Audio options Background music It enables MP3 music playback during the Slideshow. The MP3 file(s) must be placed in top directory of the current Slideshow. There are following options Off music is not played Sequential order music files are played in the order exactly as displayed Shuffle music files are played in random order Note: MP3 files are visible in Folder selection, but cannot be selected directly. The visibility is for review of available music files only. Volume Range 0-100, can by adjusted during playback from remote control as well (keys on the side of Remote Control) OPTIONS - System options Start Slideshow after reboot It enables/disables ability to run immediately after restart the last used Slideshow (top line in History). 18 Copy remote files
19 This feature enables unique non-streaming function. First, all requested files for Slideshow are copied to Local memory (must be inserted microsd or USB). Then, the Slideshow is played from this local memory only (therefore no streaming for every picture) This function is very useful for limited internet connection bandwidth or for simultaneous running devices when more video streams could be requested at the same time. In such situation,wifi router can not provide sufficient bandwidth. Important when the reload/synchronization function enabled, then upon change of remote files for Slideshow, the files in local memory are synchronized on the background during running Slideshow. Note: When enabled, it can take long time first to copy all files to i-frame local memory when Slideshow contains a lot of files. Copy folder Here the local storage folder for copied files on USB or microsd is defined. When Copy remote files enabled, then each remote Slideshow creates local copy ( in subfolder ). 3 locations available SD (default), USB1, USB2 (very rare case) Visible information Selection of status/progress information displayed on screen. Enable photo numbering (Total number of photos and current position) Display progress rotational circle (Show indicator of progress/loading during the Slideshow in the right bottom corner) Check for update (Check for system update over internet. If found, warning message is displayed in bottom line ( New firmware available ). Nothing is processed automatically, it is required to run update manually (Internet update from System Menu) All status information about loading during slideshow (Enables/disables all progress messages during Slideshow) Device name Device name is used for - Using of system special files in Vertical/Horizontal banner - FTP communication and recognition during FTP reporting and remote control (when enabled) Default name is i-frame + WiFi MAC address. 19
20 Enable watchdog This enables watchdog that monitors the Slideshows and restarts i-frame device automatically on failure (frozen picture, no response from system...) Reboot options Options to Reboot the device Repeated Reboot (Enabled, Disabled) Repeated Reboot Time (If enabled, then device i restarted at this time every day) Immediate Reboot (Device is immediately restarted) Web interface i-frame device contains web server that allows direct access to i-frame via LAN in any web browser. Note - any change requires restart of device. Enable web interface (Enabled / Disabled) Web interface port (default port 8080, can be set any to access the device in browser, type IP:port in command line, e.g :8080 Username / Password (for device access, default admin/i-frame ) Language Selection of requested language (English, German, French, Spanish, Czech, Dutch, Portuguese), English default. Load settings File iframe_settings.xml (placed in root of USB or microsd) is loaded into system. Settings contain the History. Save settings Current settings are saved in file iframe_settings.xml (placed in root of USB or microsd). Settings contain the History. 20 Default settings It returns back all settings into factory default setting: Delay between pics 5 Layout Dissolve Aspect ratio Default Order of files Alphabetic Start opacity 0
21 End opacity 0 Show numbering Enabled Vertical banner None Horizonal banner None Text speed Normal Photo/Video Photo + Video + www Date format dd/mm/yyyy kk:mm Music Off Volume 50 Reload of files Disabled Reload check interval 60 Fixed IP Empty Flickr account Empty Flickr quality Low Reboot enabled Disabled Folder selection after reboot Disabled Copy files before start Disabled Path of files empty Device Name i-frame-[mac] Languages English Max number of files FTP Reporting Disabled FTP account Empty 9. Remote access Intranet direct access Generally, this is direct access within own network. This can be used for larger remote installation but definitely there will happen security issues as open ports on the routers will be needed. The biggest advantage is direct operation with device where all commands and reports are processed immediately. This access relies on Web interface settings in Options. Default, communication is opened via port 8080, with credentials admin/i-frame (all can be modified). Go to System Menu-Status, check current IP address assignment and type in any browser in command line IP_address:port ( example :8080). Login popup will appear and enter credentials. 21
22 The Web interface contains 7 sections ( see bellow ). The i-frame device can be fully controlled via this Web interface ( including operation with internal memory ). Section Status Section Start slideshow Section History 22
24 Section Local Memory Internet indirect remote access This is the most generic type of remote control. This communication is accomplished via independent ftp server. Default used is system i-frame server however communication can be forwarded to any server. As the communication is based on full configuration XML file, full set of commands is supported and it is possible to change any parameter of the device. This access relies on FTP reporting settings in Options. As the device is initializing the communication (out, upload), there is no port security issue and it can be used for large corporate installations. The device is acting according to the XML file located on server, regularly is checking it ( can be set with Delay between checks parameter ( default 60 sec) and in case of any new command or request from GUI of the CMS, the XML file is downloaded and processed in the device. As the final step, device confirms the current status with generation and uploading current XML file back to the server. This XML file contains all parameters used in general device settings and add new commands for Device on/off, Start slideshow and Copy/Delete files to device. 10. Description of system files PLST STRUCTURE 24
25 This PLAYLIST file can be manually started from filelist or automatically started upon USB/SD insertion ( if filename is autorun.plst ). Parameters are separated with, symbol Parameters are not case sensitive # - lines beginning with "#" and ";" are just comments New line must begin with SI: or HEADER, (HEADER, just once within each plst, it is valid for all SI: lines. If not defined in HEADER, then value inherits from device current settings) D : delay to the next photo (number in seconds), duration HB : Type of horizontal banner NONE, TEXT, IMAGE, CLOCK, INFO VB : Type of vertical banner NONE, TEXT, IMAGE, CLOCK, INFO ORDER : Ordering of the items RANDOM, NAME, TIME, PATH COPY : false/true if the files should be copied first COPYLOC : Location to copy to TRANS : Used transition to show the photo DISSOLVE, FADE_IN_OUT, ZOOM_IN, ZOOM_OUT, SLIDE_LEFT, SLIDE_RIGHT, RANDOM, NO_TRANSITION, #KEN_BURNS_ZOOM_OUT, GRAY_SCALE, PAGE_TURN, BLINDS LAYOUT: Used layout FULLSCREEN, FOUR_REGIONS, FOUR_REGIONS_CENTERED, RANDOM, CORNERS, SINGLE_FLY, DOUBLE_FLY, RANDOM_FLY, #FLY_DOWN, FLY_UP, MAX R : Find photo also in subfolders (only for DIR) TEXT : Speed of the text VERY_SLOW, SLOW, NORMAL, FAST, VERY_FAST AR : Aspect ratio of the image DEFAULT,STRETCH,ZOOM NUMBER: Numbering TRUE, FALSE TXIM_NAME : Name of the identifier used to retrieve image or text file to be used in a banner. (No extension needed, only file name) TXIM_LOCATION : Location where the image or text file for the banner can be found. SILENT: Surpress visible information during Slideshow, progress rotational circle, loading during slideshow ON, OFF SIPREF: SI preferred item, that runs at defined time not in the sequential order TIM: minute-based parameter within 1-hour cycle SI: Slideshow line with file to be displayed HEADER, - special line defines global parameters for all plst items ( otherwise parameter is valid in given line only ) SD, USB1, USB2, Memory local storage. Can be used as well relative path to PLST folder, e.g. SI: Subfolder/123.jpg FTP remote location ftp.i-frame.net/123.jpg or with credentials WWW remote location or STREAM remote location (when rtcp stream requested) Stream://www.stream.net Example of plst file HEADER,D:10, LAYOUT:FULLSCREEN, NUMBER:FALSE, SILENT:ON, HB:NONE, VB:NONE, TRANS:DISSOLVE, TXIM_NAME : IF-show,TXIM_LOCATION: SD/iFrame 25 VB:IMAGE SI:http://www.i-frame.net SI: FolderA/23.jpg # identiical location as PLST file, one folder deeper) SI: USB1/iFrame/ABC.jpg,, ar:zoom, VB:image SIPREF:stream:// :8015, TIM:30, D:300 # This video stream will start repeatedly at reaching 30mins ( 12:30, 13:30 - according system time) and
1. Description The Network Camera supports the network service for a sensor image with progressive scan, which can be monitored on a real-time screen regardless of distances and locations. By using its
Quick Start Guide X3000 HD Network Media Player X3000 HD NETWORK MEDIA PLAYER POWER HANTZ + PARTNER The Upgrade Company! www.hantz.com A Get to know your HELIOS X3000 Thank you for purchasing the HELIOS
EM6230 e-camview HD outdoor IP camera 2 ENGLISH EM6230 e-camview HD outdoor IP camera Table of contents 1.0 Introduction... 3 1.1 Packing contents... 3 1.2 Requirements to access the camera.... 3 1.3 Major
Copyright 2010 Vantec Thermal Technologies. All Rights Reserved. User s Manual Package Contents: 1 NextStar FX Gigabit NAS Adapter x1 2 AC Adapter x1 3 Installation Guide x1 4 Rubber Feet x4 5 User s CD
Amcrest 960H DVR Quick Start Guide Welcome Thank you for purchasing our Amcrest 960H DVR! This quick start guide will help you become familiar with our DVR in a very short time. Before installation and
http://www.icybox.de IB-NAS902 Network Attached Storage User Manual Content Content... 2 Introduction... 3 SMB... 3 FTP... 3 DHCP... 3 More than a NAS... 3 Package content... 4 Take a look at the IB-NAS902...
EN SwannEye HD Plug & Play Wi-Fi Security Camera Quick Start Guide Welcome! Lets get started. QHADS453080414E Swann 2014 1 1 Introduction Congratulations on your purchase of this SwannEye HD Plug & Play
USER MANUAL ITV101E v.1.0 PlayXtreme INTERNET TV HUB CONTENTS About the Device... 1 Package Contents... 2 Design... 2 Front Panel... 3 Back Panel... 3 Getting Started... 4 Planning Your Network... 5 Connecting
1.0 Key Features Addonics T E C H N O L O G I E S NAS Adapter Model: NASU2 User Manual Convert any USB 2.0 / 1.1 mass storage device into a Network Attached Storage device Great for adding Addonics Storage
Dual Bay Home Media Store User Manual CH3HNAS2 V1.0 CONTENTS Chapter 1: Home Page... 3 Setup Wizard... 3 Settings... 3 User Management... 3 Download Station... 3 Online User Manual... 3 Support... 3 Chapter
Catalogue Basic Operation... 2 For Internet Explorer... 2 For Other Non-IE Web Browsers... 5 Camera Settings... 6 System... 6 About... 6 PT Setting... 7 Backup and Restore Setup... 8 NTP Setting... 8 System
AXIS Camera Station Quick Installation Guide Copyright Axis Communications AB April 2005 Rev. 3.5 Part Number 23997 1 Table of Contents Regulatory Information.................................. 3 AXIS Camera
Appspace 5.X Reference Guide (Digital Signage) Updated on February 9, 2015 1 TABLE OF CONTENTS 2 What is Appspace For Digital Signage... 4 3 Access Appspace... 4 4 Best Practices and Notes... 4 5 Appspace
Dear users, the configuration for this camera is professional, so please read the user manual carefully before using the camera. IP Camera (L series) User manual 2013-05 V1.1 Statement If the user manual
GV-IP Decoder Box and GV-Pad User s Manual V1.01 Before attempting to connect or operate this product, please read these instructions carefully and save this manual for future use. DBV101-A-EN 2012 GeoVision,
Table of Contents General notices for use... 2 Disclaimer... 2 Box Contents... 2 1.0 Product basics... 3 1.1 Connecting your device for the first time... 3 1.2 Connections... 4 1.3 Using the remote control
ShareLink 00 Setup Guide This guide provides instructions for installing and connecting the Extron ShareLink 00. The ShareLink USB 00 Wireless Collaboration Gateway allows anyone to present content from
USER GUIDE Web Interface 1. Overview... 4 2. Install and Set Up... 4 2.1. Charge your Wi-Fi HDD... 4 2.2. For Mac users... 5 2.3. Connect your Wi-Fi HDD to your computer (no Internet connection required)...
10 Magni Tablet User Guide MODEL NUMBER: Wireless Mobile Internet Tablet Powered by SYTAB10ST Top View Front View Bottom View Side View SYTAB10ST Getting to Know Your New Tablet: MINI Micro SD Micro SD
DSL1215FUN(L) Page 2 of 38 Contents About the Device...4 Minimum System Requirements...5 Package Contents...5 Device Overview...6 Front Panel...6 Side Panel...6 Back Panel...7 Hardware Setup Diagram...8
DSA-2100A Series Network Digital Signage Player User Manual Rev. 2.1 ADVANTECH CORPORATION PROVIDES NO WARRANTY WITH REGARD TO THIS MANUAL, THE SOFTWARE OR OTHER INFORMATION CONTAINED HEREIN AND HEREBY
Iomega EZ Media and Backup Center User Guide Table of Contents Setting up Your Device... 1 Setup Overview... 1 Set up My Iomega StorCenter If It's Not Discovered... 2 Discovering with Iomega Storage Manager...
Coolmax CN-590 Network Storage Solution Model Name Controller hip CPU OS Memory Interface CN-590 S2892 150MHz RTOS 8MB SDRAM / 1MB NOR Flash LAN Standard 10/100Base-TX Auto MDI/MDI-X Connector Type RJ-45
Advanced Digital Signage Content Management Server CMS-80 Highlights Equipped with intuitive user interface and accessible online help Update contents to a maximum of 250 SMP players simultaneously Offer
User Manual I1010Q16DCZ Explanation, Note and Warning *Explanation: important information, which can help you better use your tablet PC. *Note: indicates that not observing the content may result in hardware
Quick Start Guide Plug n Play NVR DS-7604NI-E1/4P DS-7608NI-E2/8P Note: For more information refer to the complete User Manual located on the CD-ROM OVERVIEW 1. Overview 2. Main Menu Layout 3. Formatting
ServersCheck Monitoring Appliance Quick Overview This document is intended to make you familiar with the ServersCheck Monitoring Appliance Although it is possible, we highly recommend not to install other
Chapter 6 Using Network Monitoring Tools This chapter describes how to use the maintenance features of your RangeMax Wireless-N Gigabit Router WNR3500. You can access these features by selecting the items
Before you begin Dual HD Giganet NAS Enclosure User s Manual 1. If you purchased the Dual HD Giganet NAS enclosure (indicated as The NAS hereafter) to share your file or media with other computers, you
Chapter 7 Using Network Monitoring Tools This chapter describes how to use the maintenance features of your RangeMax NEXT Wireless Router WNR854T. These features can be found by clicking on the Maintenance
SAS-IPCAM115 MANUAL IP CAMERA Table of contents Introduction: Safety precautions: Packaging content: System requirements: Product description: User instructions: Maintenance: Warranty: Disclaimer: Disposal:
Package Content DVR-4TL/8TL/16TL Setup Guide Inspect the DVR s packaging. Make sure that the DVR-4TL/8TL/16TL is packed properly. Remove all items from the box and make sure it contains the following items.
MZK-NAS01SG User s Manual Version. 1.0 Foreword Explanation of the Signals In order to let you set up and use this product correctly, please pay attention when reading or browsing the manual as you see
LOREX CLIENT Remote Software 4.0 Instruction Manual English Version 2.0 MODEL: L20WD800 Series www.lorexcctv.com Copyright 2008 LOREX Technology Inc. Table of Contents Table of Contents Software Installation...
Features Reference About Unified Communication System Before Using This Machine Starting a Meeting What You Can Do During the Meeting Leaving a Meeting Managing Address Book Changing Network Configuration
NAS HARD DRIVE ENCLOSURE USER MANUAL S T O R E n S H A R E MUSIC DATA PHOTO MOVIE w w w. v a n t e c u s a. c o m Package Contents: NexStar LX External 3.5 HDD NAS Enclosure: User Manual NexStar LX External
Verizon Cloud Desktop Application Help Guide Version 4.1 72 CONTENTS I. Getting started... 4 A. Verizon Cloud... 4 B. Main navigation... 5 C. System requirements... 5 D. Installing the application... 6
Cloud Storage Service User Guide (Web Interface, Android App) Table of Content System Requirements...4 1.1Web Browser... 4 1.2Mobile Apps... 4 Accessing Cloud Storage using a Web Browser... 4 The Web Home
Office NAS 3.5 IDE/SATA Network Attached Storage Model # ANAS350 User s Manual Ver. 2.3 Table of Contents 1. Introduction... 3 1.1 Package Contents... 3 1.2 Features... 3 1.3 NAS Diagram... 4 2. Hard Drive
Ultra Dashcam with Smartphone app control EN INSTRUCTION MANUAL 1 Getting to know the Dashcam GPS Receiver Slot 1 Camera Lens Micro HDMI Port 2 Speaker 1 For future application 2 Requires Micro HDMI to
Intel Unite Solution Standalone User Guide Legal Disclaimers & Copyrights All information provided here is subject to change without notice. Contact your Intel representative to obtain the latest Intel
DATA PROJECTOR EN XJ-A Series XJ-A147/XJ-A247/XJ-A257 XJ-M Series XJ-M146/XJ-M156 XJ-M246/XJ-M256 Network Function Guide In this manual, XJ-A Series and XJ-M Series refer only to the specific models listed
1-bay NAS User Guide INDEX Index... 1 Log in... 2 Basic - Quick Setup... 3 Wizard... 3 Add User... 6 Add Group... 7 Add Share... 9 Control Panel... 11 Control Panel - User and groups... 12 Group Management...
WD TV Live HD Media Player Firmware Release Notes These release notes provide information on the latest posting of firmware for the WD TV Live HD Media Player. These release notes provide information on
V48.01 Model: FI8919W Quick Installation Guide Outdoor Pan/Tilt Wireless IP Camera For Windows OS ------- Page 1 For MAC OS ------- Page 15 ShenZhen Foscam Intelligent Technology Co., Ltd Quick Installation
Quick Start Guide NVR DS-7104NI-SL/W NVR NOTE: For more detailed information, refer to the User s Manual on the CD-ROM. You must use your PC or MAC to access the files. www.hikvision.com Quick Start 1.
1 Table of Contents Table of Contents...1 1. Introducing Your Boss Touch Screen Tablet ComputerError! Bookmark not defined. 2. Getting Started...4 2.1 Battery Charging...5 2.2 Screen Calibration 2.2 How
3.5 LAN HDD Enclosure User s Manual NOTE: 1. USB and LAN can t be used at the same time. 2. HDD should be formatted as FAT32. Please check Disk utility section in this manual. 3. For internet FTP usage,
SNMP Web card User s Manual Management Software for Uninterruptible Power Supply Systems Table of Contents 1. Overview... 3 1.1 Introduction... 3 1.2 Features... 3 1.3 Overlook... 3 1.4 Installation and
Model: FI8910W Quick Installation Guide (For Windows OS) (For MAC OS please go to page 17) Indoor MJPEG Pan/Tilt Wireless IP Camera Black White Package Contents IP Camera FI8910W with IR-Cut.x 1 DC Power
Network Storage Server User s Manual Introduction... 3 Features... 3 Minimum Requirements... 3 Package Contents... 3 Understand your Storage Server... 5 Back Panel... 5 Front Panel... 6 Getting started...
Wireless VoIP Phone User s Manual Table of Contents Chapter 1 Overview the WiFi Phone... 6 1.1 Front Panel and Keypad... 6 1.2 Removing and Installing the Battery... 8 1.4 Powering the WiFi Phone On and
MDMS Multiple Device Monitor System v1.0 User Manual Copyright 2014 All rights reserved. No part of this document may be reproduced, republished, or retransmitted in any form or by any means whatsoever,
TSMobiles Terminal Service client for Mobiles For keyboard and touchscreen BlackBerry devices User manual Introduction... 3 System Requirements... 3 1. Configuring Remote Desktop on computer... 4 2. Installation...
User s Manual of DVR DVS Remote Client Software V 4.0.1 Index Version description...4 1 Introduction...8 2 Software Install, Uninstall and use...9 2.1 Install remote client software ver4.0.1...9 2.2 Uninstall
HDMI or Component Standalone Capture Device 1080p USB2HDCAPS *actual product may vary from photos DE: Bedienungsanleitung - de.startech.com FR: Guide de l'utilisateur - fr.startech.com ES: Guía del usuario
Point of View SmartTV-500 Center - Android 4.2 English Table of Contents General notices for use...2 Disclaimer...2 Box Contents...2 1.0 Product basics...3 1.1 Buttons and connections... 3 1.2 Connecting
USER GUIDE FOR ANDROID DEVICES Compatibility: Android 2.3 or higher 1. Overview... 4 2. Install and Set Up... 4 2.1. Charge your Power Connect... 4 2.2. Charge your smartphone battery with Power Connect...
4-259-436-11 (1) Digital Photo Frame DPF-XR100/VR100 Before operation Basic operations Advanced operations Using with a computer Error messages Troubleshooting Additional information Digital Photo Frame
V46.01 Model: FI8918W Quick Installation Guide Indoor Pan/Tilt Wireless IP Camera Black White For Windows OS ------- Page 1 For MAC OS ------- Page 11 ShenZhen Foscam Intelligent Technology Co., Ltd Quick
Chapter 6 Using Network Monitoring Tools This chapter describes how to use the maintenance features of your RangeMax Dual Band Wireless-N Router WNDR3300. You can access these features by selecting the
TABLE OF CONTENTS OVERVIEW... 1 Front of your camera... 1 Back of your camera... 2 ACCESSORIES... 3 CHAPTER 1: Navigating the Mobile Application... 4 Device List: How to Use this Page... 4 My Messages:
User Manual TC-200 Introduction TC-200 Product Description The TC-200 provides the fastest Thin Client performance on the market, It runs embedded Linux, swing user interface, Citrix 6.3, Microsoft RDP
User Manual V1.0 Notice: The information in this manual was current when published. The manufacturer reserves the right to revise and improve its products. All specifications are therefore subject to change
Quick Installation Guide (For Windows & Mac OS) Outdoor Wireless IP Camera Package Contents V1.1 IP Camera Power Adapter Resource CD Ethernet Cable Mounting Bracket(except FI8919) Wi-Fi Antenna Quick Installation
Set Up Guide USING YOUR DMX PROFUSION io FOR 1 Connect 2 Set Up 3 Listen SIMPLE PERSONALIZED UNLIMITED ECONOMICAL LICENSED Welcome Thank you for choosing DMX to provide your Pandora listening experience
SAMSUNG S GUIDE TO DLNA Welcome to the era of 21 st -century television! Samsung s added a new level of functionality to its HDTVs with DLNA CERTIFIED connectivity. Now, your compatible Samsung HDTV can
Support Thank you for purchasing this NETGEAR product. You can visit www.netgear.com/support to register your product, get help, access the latest downloads and user manuals, and join our community. We
Wireless Presentation System User s Manual (Model Name: WPS-Dongle) Version: 3.0 Date: August 19, 2009 Table of Contents 1. Overview...3 2. Quick Start...4 3. Windows Client Utility...7 3.1 Starting Program...7