OCT. Product Catalog. Bright Ideas in Dental Implants

Transcription

1 OCT Product Catalog Bright Ideas in Dental Implants

2 Illuminating Dear Customer, Thank you f allowing Southern Implants Inc. the opptunity to provide solutions which we hope meet exceed your expectations. Southern Implants has been producing innovative, high quality dental implants and accessies f over 20 years, and distributing these products throughout Europe, Australia and South Africa. In recent years, we have introduced our products to the Nth American, Asian, South American and the Middle Eastern markets. Our headquarters are in Irvine, Califnia where we have a state-of-the-art manufacturing facility and we continue to provide superi technical suppt and customer service f which Southern is well known. Our range of implant products is broad, fulfilling both niche and standard requirements f all specialties. If you wish, at any time, to discuss Southern s products, ongoing developments, and future research, if you have any suggestions which you feel would help us serve you better, please call me directly at , ext Again, thank you f allowing Southern Implants, Inc. to satisfy your implant requirements, and I look fward to speaking with you in the future. Michael A. Kehoe Southern Implants, Inc. Chief Executive Officer

3 Table of Contents Parallel External Tapered External Parallel Internal MAX OCT-XT Tapered Implants Ø4.0 mm & Ø5.0 mm, Internal Octagon, Mse Taper... 4 Options (using Ø4.8 mm components)... 5 Ø6.0 mm, Internal Octagon, Mse Taper... 6 Co-Axis External Internal Tri-Lobe MAX-IT Options (using Ø6.5 mm components)... 7 MAX-IT Implants Ø7.0 mm, Internal Octagon, Mse Taper... 8 Options (using Ø4.8 mm components)... 9 Ø8.0 mm & Ø9.0 mm, Internal Octagon, Mse Taper Options (using Ø6.5 mm components) OCT-XT 12 Co-Axis Implants Ø5.0 mm, Internal Octagon, Mse Taper Options (using Ø4.8 mm components) OCT-XP Parallel Implants Ø3.3 mm, Ø4.1 mm & Ø4.9 mm, Internal Octagon, Mse Taper Options (using Ø4.8 mm components) OCT-XT (Tapered), OCT-XP (Parallel) & OCT-XT 12 Co-Axis Surgical Tray MAX-IT Surgical Tray Overdenture Options Locat Membranes Non-Resbable Membranes Resbable Membranes & PTFE-Sutures Surgical Mots Note: Product specifications are subject to change without notice. Not all items illustrated are at actual size. To Order Please Call

4 Parallel External Tapered External OCT-XT (ITT) Tapered Implants Ø4.0 mm & Ø5.0 mm MAX Ø4.8 mm, Internal Octagon Co-Axis External Parallel Internal Internal Tri-Lobe MAX-IT Surgical IMPORTANT: OCT-XT (ITT) Ø4.0 mm & Ø5.0 mm implants feature a Ø4.8 mm restative platfm ITT4 Ø4.8 mm 1.8 mm L OCT-XT Ø4.0 mm ITT408 ITT410 ITT412 ITT414 Ø4.0 mm x 8 mm Length Ø4.0 mm x 10 mm Length Ø4.0 mm x 12 mm Length Ø4.0 mm x 14 mm Length Ø4.0 mm ITT5 Ø4.8 mm 1.8 mm L OCT-XT Ø5.0 mm ITT508 ITT510 ITT512 ITT514 Ø5.0 mm x 8 mm Length Ø5.0 mm x 10 mm Length Ø5.0 mm x 12 mm Length Ø5.0 mm x 14 mm Length Ø5.0 mm TT0 Cover Screw TT0 Ø4.8 mm Cover Screw TT1 TT2 Healing Abutments TT1 TT2 TT3 TT4.5 Ø4.8 mm x 1.0 mm Height Ø4.8 mm x 2.0 mm Height Ø4.8 mm x 3.0 mm Height Ø4.8 mm x 4.5 mm Height TT3 TT4.5 4 To Order Please Call

5 Parallel External OCT-XT (ITT) Tapered Implants Ø4.0 mm & Ø5.0 mm Surgical Ø4.8 mm, Internal Octagon IMPORTANT: OCT-XT (ITT) Ø4.0 mm & Ø5.0 mm implants feature a Ø4.8 mm restative platfm Healing Abutments Impression Copings s Components Retention Screws ITS-CA5T ITS-TC1 (Engaging) ITS-TC1ne (Non-Engaging) Retention Screws GSIT2 TT h=1/2/3/4.5 Pick-up/Open Tray LITS4 TSIT2 ITS-PC1 (Engaging) ITS-GC1 (Engaging) ITS-PC1ne (Non-Engaging) ITS-GC1ne (Non-Engaging) ITS-TRC5 Transfer/Closed Tray (Engaging) Cover Screw TT0 Gold/Tx TEMPORARY TITANIUM CYLINDER Titanium/Tx BSIT2 UCLA Brass/Tx (Lab only) Plastic Gold ITS-TRne Transfer/Closed Tray (Non-Engaging) Passive Screws ITS-PA (Engaging) ITS-PA-ne (Non-Engaging) PASSIVE TS-IT-PA Abutments Titanium/Tx with Luting Screw (Hex.048 ) BS-IT-PA P-CAP-55 P-CAP-40 LT7/10 Ø4.0 mm OCT-XT Implants ITT4 Brass/Tx (Lab only) Plastic Protective Cap Impression Aid Solid Abutment TSAF4 LAF TSAF5.5 h=5.5 h=4 Strengthener Ø5.0 mm OCT-XT Implants ITT5 IT-PE IIAP h=4/5.5 Impression Aid h=4 / 5.5 h=4/5.5 (Engaging) Waxing Sleeve SynOcta Abutment SYN15D-C6* SYN15D-F6* SYN-6 SYN20D-C6* SYN20D-F6* h=6 LITS4 *C Angle of the abutment is iented to the cner of the octagon *F Angle of the abutment is iented to the flat of the octagon 15 Angulation 20 Angulation To Order Please Call

6 Parallel External Tapered External OCT-XT (ITT) Tapered Implants Ø6.0 mm MAX Ø6.5 mm, Internal Octagon Co-Axis External Parallel Internal Internal Tri-Lobe MAX-IT Surgical IMPORTANT: OCT-XT (ITT) Ø6.0 mm implants feature a Ø6.5 mm restative platfm ITT6 Ø6.5 mm 1.8 mm L OCT-XT Ø6.0 mm ITT608 ITT610 ITT612 Ø6.0 mm x 8 mm Length Ø6.0 mm x 10 mm Length Ø6.0 mm x 12 mm Length Ø5.7 mm TT6-0 Cover Screw TT6-0 Ø6.5 mm Cover Screw TT6-1 TT6-2 TT6-3 TT6-5 TT6-6 Healing Abutments TT6-1 TT6-2 TT6-3 TT6-5 TT6-6 Ø6.5 mm x 1.0 mm Height Ø6.5 mm x 2.0 mm Height Ø6.5 mm x 3.0 mm Height Ø6.5 mm x 5.0 mm Height Ø6.5 mm x 6.0 mm Height 6 To Order Please Call

7 Surgical Parallel External OCT-XT (ITT) Tapered Implants Ø6.0 mm Ø6.5 mm, Internal Octagon IMPORTANT: OCT-XT (ITT) Ø6.0 mm implants feature a Ø6.5 mm restative platfm Healing Abutments Impression Copings s Components Retention Screws ITS6-CA5T ITS6-TC1 (Engaging) ITS6-TC1ne (Non-Engaging) LITS6 Gold/Tx TSIT2 ITS6-TRC5 Transfer/Closed Tray (Engaging) GSIT2 TEMPORARY TITANIUM CYLINDER Pick-up/Open Tray TT6 h=1/2/3/5/6 Retention Screws ITS6-PC1 (Engaging) ITS6-PC1ne (Non-Engaging) Titanium/Tx BSIT2 UCLA Brass/Tx (Lab only) Plastic Cover Screw TT6-0 ITS6-TRne h= 2/4 S-ITS6-4 Transfer/Closed Tray (Non-Engaging) Passive Screws PASSIVE Abutments ITS6-PA (Engaging) ITS6-PA-ne (Non-Engaging) TS-IT-PA Titanium/Tx Ø6.0 mm with Luting Screw (Hex.048 ) OCT-XT Implants ITT6 P-CAP6-40 P-CAP6-55 BS-IT-PA Brass/Tx (Lab only) LT7/10 Plastic Protective Cap Impression Aid Solid Abutment TSA6-4 TSA6-5.5 h=4 Strengthener LAF6 h=5.5 IT6-PE IIAP h=4/5.5 Impression Aid SynOcta Abutment SYN615D-C6* SYN615D-F6* SYN6-6 h=6.5 SYN620D-C6* SYN620D-F6* h=4 / 5.5 h=4/5.5 (Engaging) Waxing Sleeve LITS6 *C Angle of the abutment is iented to the cner of the octagon 15 Angulation 20 Angulation *F Angle of the abutment is iented to the flat of the octagon (Optional) To Order Please Call

8 Parallel External Tapered External Parallel Internal MAX-IT Implants Ø7.0 mm MAX Surgical Ø4.8 mm, Internal Octagon Co-Axis External Internal Tri-Lobe MAX-IT IMPORTANT: MAX-IT Ø7.0 mm implants feature a Ø4.8 mm restative platfm MAX-IT-7 Ø4.8 mm Platfm Ø6.0mm L MAX-IT-7 Implants MAX IT 7-7 MAX IT 7-9 MAX IT 7-11 Ø7.0 mm x 7 mm Length Ø7.0 mm x 9 mm Length Ø7.0 mm x 11 mm Length Ø7.0 mm TT0 Cover Screw TT0 Ø4.8 mm Cover Screw TT1 TT2 Healing Abutments TT1 TT2 TT3 TT4.5 Ø4.8 mm x 1.0 mm Height Ø4.8 mm x 2.0 mm Height Ø4.8 mm x 3.0 mm Height Ø4.8 mm x 4.5 mm Height TT3 TT4.5 8 To Order Please Call

9 Surgical Parallel External MAX-IT Implants Ø7.0 mm Ø4.8 mm, Internal Octagon IMPORTANT: MAX-IT Ø7.0 mm implants feature a Ø4.8 mm restative platfm Healing Abutments Impression Copings s Components Retention Screws ITS-CA5T ITS-TC1 (Engaging) ITS-TC1ne (Non-Engaging) Retention Screws GSIT2 TT h=1/2/3/4.5 Pick-up/Open Tray LITS4 Gold/Tx TEMPORARY TITANIUM CYLINDER TSIT2 ITS-PC1 (Engaging) ITS-PC1ne (Non-Engaging) ITS-TRC5 Transfer/Closed Tray (Engaging) ITS-GC1 (Engaging) ITS-GC1ne (Non-Engaging) Titanium/Tx BSIT2 UCLA Brass/Tx (Lab only) Plastic Cover Screw Gold ITS-TRne TT0 Transfer/Closed Tray (Non-Engaging) Passive Screws ITS-PA (Engaging) ITS-PA-ne (Non-Engaging) PASSIVE TS-IT-PA Abutments Titanium/Tx MAX-IT Implants Ø7.0 mm with Luting Screw (Hex.048 ) BS-IT-PA P-CAP-55 P-CAP-40 LT7/10 Brass/Tx (Lab only) Plastic Protective Cap Impression Aid Solid Abutment TSAF4 LAF TSAF5.5 h=5.5 h=4 Strengthener IT-PE IIAP h=4/5.5 Impression Aid h=4 / 5.5 h=4/5.5 (Engaging) Waxing Sleeve SynOcta Abutment SYN15D-C6* SYN15D-F6* SYN-6 SYN20D-C6* SYN20D-F6* LITS4 *C Angle of the abutment is iented to the cner of the octagon h=6 *F Angle of the abutment is iented to the flat of the octagon 15 Angulation 20 Angulation (Optional) To Order Please Call

10 Parallel External Tapered External Parallel Internal MAX-IT Implants Ø8.0 mm & Ø9.0 mm MAX Surgical Ø6.5 mm, Internal Octagon Co-Axis External Internal Tri-Lobe MAX-IT IMPORTANT: MAX-IT Ø8.0 mm & Ø9.0 mm implants feature a Ø6.5 mm restative platfm MAX-IT-8 Ø6.5 mm Platfm Ø7.0mm L MAX-IT-8 Implants MAX IT 8-7 MAX IT 8-9 MAX IT 8-11 Ø8.0 mm x 7 mm Length Ø8.0 mm x 9 mm Length Ø8.0 mm x 11 mm Length Ø8.0 mm MAX-IT-9 Ø8.0 mm Ø6.5 mm Platfm L MAX-IT-9 Implants MAX IT 9-7 MAX IT 9-9 MAX IT 9-11 Ø9.0 mm x 7 mm Length Ø9.0 mm x 9 mm Length Ø9.0 mm x 11 mm Length Ø9.0 mm TT6-0 Cover Screw TT6-0 Ø6.5 mm Cover Screw TT6-3 TT6-1 TT6-5 TT6-2 TT6-6 Healing Abutments TT6-1 TT6-2 TT6-3 TT6-5 TT6-6 Ø6.5 mm x 1.0 mm Height Ø6.5 mm x 2.0 mm Height Ø6.5 mm x 3.0 mm Height Ø6.5 mm x 5.0 mm Height Ø6.5 mm x 6.0 mm Height 10 To Order Please Call

11 Surgical MAX-IT Implants Ø8.0 mm & Ø9.0 mm Parallel External Ø6.5 mm, Internal Octagon IMPORTANT: MAX-IT Ø8.0 mm & Ø9.0 mm implants feature a Ø6.5 mm restative platfm Healing Abutments Impression Copings s Components Retention Screws ITS6-CA5T ITS6-TC1 (Engaging) ITS6-TC1ne (Non-Engaging) LITS6 Gold/Tx TSIT2 ITS6-TRC5 Transfer/Closed Tray (Engaging) GSIT2 TEMPORARY TITANIUM CYLINDER Pick-up/Open Tray TT6 h=1/2/3/5/6 Retention Screws ITS6-PC1 (Engaging) ITS6-PC1ne (Non-Engaging) Titanium/Tx BSIT2 UCLA Brass/Tx (Lab only) Plastic Cover Screw TT6-0 ITS6-TRne h= 2/4 S-ITS6-4 Transfer/Closed Tray (Non-Engaging) Passive Screws PASSIVE Abutments ITS6-PA (Engaging) ITS6-PA-ne (Non-Engaging) Titanium/Tx with Luting Screw (Hex.048 ) MAX-IT Implants Ø8.0 mm & Ø9.0 mm P-CAP6-40 TS-IT-PA P-CAP6-55 BS-IT-PA LT7/10 Brass/Tx (Lab only) Plastic Protective Cap Impression Aid Solid Abutment TSA6-4 TSA6-5.5 h=4 Strengthener LAF6 h=5.5 IT6-PE IIAP h=4/5.5 Impression Aid SynOcta Abutment SYN615D-C6* SYN615D-F6* SYN6-6 h=6.5 SYN620D-C6* SYN620D-F6* h=4 / 5.5 h=4/5.5 (Engaging) Waxing Sleeve LITS6 *C Angle of the abutment is iented to the cner of the octagon 15 Angulation 20 Angulation *F Angle of the abutment is iented to the flat of the octagon (Optional) To Order Please Call

12 Parallel External Tapered External OCT-XT (ITST12d) 12 Co-Axis Tapered Implants, Ø5.0 mm MAX Ø4.8 mm, Internal Octagon Co-Axis External Parallel Internal Internal Tri-Lobe MAX-IT Surgical IMPORTANT: Co-Axis (ITST12d) Ø5.0 mm OCT-XT implants feature a Ø4.8 mm restative platfm ITST12d-5 4.8mm 12 o OCT-XT Ø5.0 mm Co-Axis L ITST12d-510 ITST12d-512 ITST12d-514 Ø5.0 mm x 10 mm Length Ø5.0 mm x 12 mm Length Ø5.0 mm x 14 mm Length 5.0mm TT0 Cover Screw TT0 Ø4.8 mm Cover Screw TT1 TT3 TT2 TT4.5 Healing Abutments TT1 TT2 TT3 TT4.5 Ø4.8 mm x 1.0 mm Height Ø4.8 mm x 2.0 mm Height Ø4.8 mm x 3.0 mm Height Ø4.8 mm x 4.5 mm Height 12 To Order Please Call

13 Surgical OCT-XT (ITST12d) 12 Co-Axis Tapered Implants, Ø5.0 mm Parallel External Ø4.8 mm, Internal Octagon IMPORTANT: Co-Axis (ITST12d) Ø5.0 mm OCT-XT implants feature a Ø4.8 mm restative platfm Healing Abutments Impression Copings s Components Retention Screws ITS-CA5T ITS-TC1 (Engaging) ITS-TC1ne (Non-Engaging) Retention Screws GSIT2 TT h=1/2/3/4.5 Pick-up/Open Tray LITS4 Gold/Tx TEMPORARY TITANIUM CYLINDER TSIT2 ITS-PC1 (Engaging) ITS-PC1ne (Non-Engaging) ITS-TRC5 Transfer/Closed Tray (Engaging) ITS-GC1 (Engaging) ITS-GC1ne (Non-Engaging) BSIT2 UCLA Titanium/Tx Brass/Tx (Lab only) Plastic Cover Screw Gold ITS-TRne TT0 Transfer/Closed Tray (Non-Engaging) Passive Screws ITS-PA (Engaging) ITS-PA-ne (Non-Engaging) PASSIVE TS-IT-PA Abutments Titanium/Tx Ø5.0 mm with Luting Screw (Hex.048 ) OCT-XT Co-Axis Implants ITST12d-5 P-CAP-55 P-CAP-40 BS-IT-PA LT7/10 Brass/Tx (Lab only) Plastic Protective Cap Impression Aid Solid Abutment TSAF4 LAF TSAF5.5 h=4 Strengthener h=5.5 IT-PE IIAP h=4/5.5 Impression Aid h=4 / 5.5 h=4/5.5 (Engaging) Waxing Sleeve SynOcta Abutment LITS4 SYN-6 h=6 (Optional) To Order Please Call

14 Parallel External Parallel Internal Tapered External MAX OCT-XP (ITC) Parallel Implants Ø3.3 mm, Ø4.1 mm & Ø4.9 mm Ø4.8 mm, Internal Octagon Internal Tri-Lobe Co-Axis External Surgical MAX-IT IMPORTANT: OCT-XP (ITC) Ø3.3 mm, Ø4.1 mm & Ø4.9 mm implants feature a Ø4.8 mm restative platfm ITC3 4.8mm 1.8mm OCT-XP Ø3.3 mm L ITC306 ITC308 ITC310 ITC312 ITC314 Ø3.3 mm x 6 mm Length Ø3.3 mm x 8 mm Length Ø3.3 mm x 10 mm Length Ø3.3 mm x 12 mm Length Ø3.3 mm x 14 mm Length ITC406 ITC408 ITC410 ITC412 ITC414 Ø4.1 mm x 6 mm Length Ø4.1 mm x 8 mm Length Ø4.1 mm x 10 mm Length Ø4.1 mm x 12 mm Length Ø4.1 mm x 14 mm Length ITC506 ITC508 ITC510 ITC512 ITC514 Ø4.9 mm x 6 mm Length Ø4.9 mm x 8 mm Length Ø4.9 mm x 10 mm Length Ø4.9 mm x 12 mm Length Ø4.9 mm x 14 mm Length TT0 Ø4.8 mm Cover Screw TT1 TT2 TT3 TT4.5 Ø4.8 mm x 1.0 mm Height Ø4.8 mm x 2.0 mm Height Ø4.8 mm x 3.0 mm Height Ø4.8 mm x 4.5 mm Height 3.3mm ITC4 4.8mm 1.8mm OCT-XP Ø4.1 mm L 4.1mm ITC5 4.8mm 1.8mm OCT-XP Ø4.9 mm L 4.9mm TT0 Cover Screw TT1 TT2 Healing Abutments 14 TT3 TT4.5 To Order Please Call

15 Surgical OCT-XP (ITC) Parallel Implants Ø3.3 mm, Ø4.1 mm & Ø4.9 mm Parallel External Ø4.8 mm, Internal Octagon IMPORTANT: OCT-XP (ITC) Ø3.3 mm, Ø4.1 mm & Ø4.9 mm implants feature a Ø4.8 mm restative platfm Healing Abutments Impression Copings s Components Retention Screws ITS-CA5T ITS-TC1 (Engaging) ITS-TC1ne (Non-Engaging) Retention Screws GSIT2 TT h=1/2/3/4.5 Pick-up/Open Tray LITS4 TSIT2 ITS-PC1 (Engaging) ITS-PC1ne (Non-Engaging) ITS-TRC5 Transfer/Closed Tray (Engaging) Cover Screw TT0 Gold/Tx TEMPORARY TITANIUM CYLINDER ITS-GC1 (Engaging) ITS-GC1ne (Non-Engaging) Titanium/Tx BSIT2 UCLA Brass/Tx (Lab only) Plastic Gold ITS-TRne Transfer/Closed Tray (Non-Engaging) Passive Screws ITS-PA (Engaging) ITS-PA-ne (Non-Engaging) PASSIVE Ø3.3 mm OCT-XP Implants ITC3 TS-IT-PA Abutments Titanium/Tx with Luting Screw (Hex.048 ) BS-IT-PA Brass/Tx (Lab only) P-CAP-55 P-CAP-40 LT7/10 Ø4.1 mm OCT-XP Implants ITC4 Plastic Protective Cap Impression Aid Solid Abutment TSAF4 LAF TSAF5.5 h=5.5 h=4 Strengthener Ø4.9 mm OCT-XP Implants ITC5 IT-PE IIAP h=4/5.5 Impression Aid h=4 / 5.5 h=4/5.5 (Engaging) Waxing Sleeve SynOcta Abutment SYN15D-C6* SYN15D-F6* SYN-6 SYN20D-C6* SYN20D-F6* LITS4 *C Angle of the abutment is iented to the cner of the octagon h=6 *F Angle of the abutment is iented to the flat of the octagon 15 Angulation 20 Angulation (Optional) To Order Please Call

16 Parallel External Parallel Internal Tapered External MAX Standard OCT-XT (Tapered) OCT-XP (Parallel) & OCT-XT 12 Co-Axis Surgical Tray Internal Tri-Lobe Co-Axis External MAX-IT TWIST DRILLS Twist Drills (Single Use) Ø4 8 I-RB IT-Surgical Tray D-20T-OCT-15 D-29T-OCT-15 ADDITIONAL INSTRUMENTS D-30T-OCT-15 D-35T-OCT-15 Ø5 D-20T D-29T Ø6 D-30T D-33T D-40T D-43T Ø8 D-53T I-SP-X INSTRUMENTS PLACEMENT TOOLS DRIVERS EXTENSIONS DIRECTION INDICATORS Tque Wrench D-40T-OCT-15 D-43T-OCT-15 D-46T-OCT-15 Ø9 D-50T Additional Instruments WRENCH I-TW-45 15, 32, & 45 Ncm s Handheld DEPTH GAUGE F 12 OCT-XT Co-Axis I-SCS-S I-SCS-L I-SURGICALTRAY-OCT Extension I-DE D-RB Latch Type I-SCS Drills (Single Use) D-CB-F Ratchet Wrench I-WI-SA I-FM-H D-50TPI-14 -S D-50TPI-12 D-50TPI-10 I-WI-SCS-S -S D-50TPI-08 D-50TPI-06 I-WI-SA -S Tapered Bone Taps f OCT-XT Implants I-WI-SCS-M D-TAP-ITT4 D-TAP-ITT5 D-TAP-ITT6 I-SCS-L D-43T-M15 D-29T-M15 D-35T-M15 D-20T-M15 I-DE D-RB-MS I-TW-45 D-40TPI-10 D-40TPI-08 D-40TPI-06 D-40TPI-14 D-40TPI-12 Wrench Insert Converter to Wrench I-FM-H I-WI-C-S 16 To Order Please Call D-50TPI-14 -S -S Latch Type Use only with TSAF4 and TSAF5.5 I-HSCS-M Handle -S Latch Type Solid Abutment Driver Insertion Tools I-SCS-M I-FME-XS I-FME-XL D-608T D-610T D-612T Handheld I-WI-SA D-508T D-510T D-512T D-514T s Fixture Mount Wrench Insert I-FM-H D-408T D-410T D-412T D-414T Extentions D-40TPI-14 I-DI Tapered Drills I-DI-12d -S I-RATCHET-2 Direction Indicat Direction Indicats Wrench Inserts 18 I-SCS 15 D-29T-M15 -S I-ITS-FMU -S-S I-CON-IT I-SCS-L 13 I-TW Insertion Tools Latch Type Fixture Mount Converter D-43T-M15 I-DG I-CON-XS I-SCS I-SP-X Depth Gauge 7 -S I-WI-SCS-S Open End Wrench D-30T-OCT-15 -S -S I-CON-X Wrench Inserts D-20T-OCT-15 Converter to Handpiece

17 Parallel External MAX-IT Surgical Tray DRILLS TAPS MAX-ROD Ø7x7 Ø7x7 Ø7x9 Ø7x9 MAX-7-PG 7 9 I-FME-XS Ø7x11 Ø8x7 Ø8x9 Ø8x11 Ø9x7 Ø9x9 Ø9x11 Ø7x11 Ø8x7 Ø8x9 Ø8x11 Ø9x7 Ø9x9 Ø9x11 MAX-8-PG MAX-9-PG I-CON-X I-SCS-M I-RATCHET/I-TW-45 I-SP-X I-SURGICALKIT-MAX-IT Drills (Single Use) D-RB D-CB-F D-30T-M-15 Tapered Drills D-608T D-70TP-7 (Optional) D-80TP-7 D-90TP-7 D-70TP-9 (Optional) D-80TP-9 D-90TP-9 D-70TP-11 (Optional) D-80TP-11 D-90TP-11 /9/11 D-TAP-MAX9-7/9/11 D-TAP-MAX8-7/9/11 D-TAP-MAX8-7/9/11 Dedicated Bone Taps D-TAP-MAX7-7 (Optional) D-TAP-MAX7-9 (Optional) D-TAP-MAX7-11 (Optional) D-TAP-MAX8-7 D-TAP-MAX8-9 D-TAP-MAX8-11 D-TAP-MAX9-7 D-TAP-MAX9-9 D-TAP-MAX9-11 Profile Gauges MAX-7-PG-7 (Optional) MAX-8-PG-7 MAX-9-PG-7 MAX-7-PG-9 (Optional) MAX-8-PG-9 MAX-9-PG-9 MAX-7-PG-11 (Optional) MAX-8-PG-11 MAX-9-PG-11 MAX-ROD F Profile Gauge Placement Tool I-CON-XS Extension Fixture Mount Wrench Insert I-FME-XS Ratchet Wrench I-RATCHET-2 Open End Wrench I-SP-X s I-SCS-M To Order Please Call I-WI-SCS-S -S D-50TPI-06 D-40TPI-06 I-DE D-50TPI-08 D-RB-MS D-40TPI-08 D-20T-M15 D-50TPI-10 D-40TPI-10 D-35T-M15 D-50TPI-12 D-40TPI-12 D-29T-M15 D-50TPI-14 D-40TPI-14 D-43T-M15 -S Tque Wrench I-SCS Handle I-FM-H Extension Fixture Mount Wrench Insert I-FME-XL I-SCS-L I-WI-SA I-FM-H I-TW-45 I-TW-45 15, 32, & 45 Ncm s Handheld I-SCS-S I-SCS-L Latch Type Wrench Inserts I-WI-SCS-S Additional Instruments -S 17

18 Parallel External Tapered External Parallel Internal MAX Overdenture Options Locat Internal Tri-Lobe Co-Axis External MAX-IT Locat System OCT Implant Ø Height 4.8 mm 4.8 mm 4.8 mm 4.8 mm 4.8 mm 4.8 mm.73 mm 2 mm 3 mm 4 mm 5 mm 6 mm LOC-8950 LOC-8951 LOC-8952 LOC-8953 LOC-8954 LOC-8955 Locat Attachments Locat Attachments Locat Ce Tool LOC-8393 Locat Male Processing Package LOC Titanium cap with black low density polyethylene male, block out spacer and nylon replica males (clear, pink, blue) - (10 pack) Locat Male Processing Package LOC Titanium cap with black low density polyethylene male, block out spacer and nylon replica males (clear, pink, blue) - (2 pack) Locat Male Removal Tool LOC-8397 Locat Parallel Post LOC-8517 (4 pack) Locat Processing LOC-8515 Replacement Male (Black) (4 pack) Locat Processing LOC-8558 Replacement Male (Grey) (4 pack) Locat Light Retention LOC-8527 Replacement Male (Pink) (4 pack) Locat Extra-Light Retention Replacement Male (Blue) (4 pack) LOC-8529 Locat Replacement LOC-8524 Replacement Male (Clear) (4 pack) Locat LOC-8505 (4 pack) Locat Female - ø4.0 mm LOC-8530 (4 pack) Locat Extended Range LOC-8547 Replacement Male (Green) (4 pack) Locat Extra-Light Extended Range LOC-8548 Replacement Male (Red) (4 pack) Locat Block-Out Spacer LOC-8514 (White) (2 pack) 18 Locat Abutment Driver 15 mm LOC-8926 To Order Please Call

19 Notes 19

20 Regenerative Materials Non-Resbable Membranes Cytoplast Non-Resbable Membranes Description Size Qty Cytoplast Ti-250 Anteri Narrow 12 x 20 mm 2 Ti250AN-2 Titanium reinfced, high-density PTFE membrane Ideal f narrow single-tooth extraction sites, especially where one me bony walls are missing. Cytoplast Ti-250 Anteri Single 14 x 24 mm 2 TI250AS-2 Titanium reinfced, high-density PTFE membrane Ideal size and shape f single-tooth extraction sites, especially where one me bony walls are missing. Cytoplast Ti-250 Posteri Large 25 x 30 mm 2 Ti250PL-2 Titanium reinfced, high-density PTFE membrane Designed f grafting large bony defects, including ridge augmentation. Cytoplast Ti-250 Posteri Single 20 x 25 mm 2 TI250PS-2 Titanium reinfced, high-density PTFE membrane Designed f grafting posteri extraction sites and limited ridge augmentation. Cytoplast TXT-200 Singles 12 x 24 mm 10 TXT1224 Micro-textured, high density PTFE membrane in a size ideal f single sites Applications: Single tooth extraction site grafting Thin flaps Where primary closure is not possible Periodontal applications Cytoplast TXT x 30 mm 4 TXT2530 Micro-textured, high density PTFE membrane Applications: Large defects Thin flaps Where primary closure is not possible Periodontal applications 20 To Order Please Call

21 Regenerative Materials Resbable Membranes & PTFE Sutures Cytoplast Resbable Membanes Description Size Qty Cytoplast RTM x 20 mm 2 RTM1520 Cytoplast RTM x 30 mm 2 RTM2030 Cytoplast RTM x 40 mm 2 RTM3040 Cytoplast RTM Collagen Type 1 bovine collagen membrane Resption profile: weeks Applications: Periodontal defects Sinus lift osteotomies Repair of access windows Soft tissue augmentation Periapical lesions Cytoplast PTFE Suture Description Diameter Needle Qty CS-0618 Premium USP 4-0 C-3 12 CS0618PREM 13 mm premium reverse cutting needle. Offers over 50% longer cutting edges, giving needles a me slender, defined shape that greatly decreases the fce applied to the needle during surgery. CS-0618 Perio USP 4-0 T CS0618PERIO 13 mm taper point needle. Often used on soft tissue grafts and suturing of delicate tissues that require an atraumatic needle. CS-0618 RC USP 4-0 C CS0618RC Most popular of the smaller CS-06 sutures. 16 mm reverse cutting needle. Often used f dental implant and bone grafting procedures where a very small diameter suture is desired. CS-0518 USP 3-0 C CS0518 Most popular size, especially f dental implant and bone grafting procedures. 16 mm reverse cutting needle. CS USP 3-0 C-6 12 CS Most popular size, especially f dental implant and bone grafting procedures. 19 mm reverse cutting needle. CS-0418 USP 2-0 C-6 12 CS mm reverse cutting needle, which is popular f procedures where a longer needle is desired. To Order Please Call

22 Surgical Mots Description Elcomed SA-310 (With USB Documentation) Elcomed SA-310 (Without USB Documentation) WH WH Implantmed SI-915 (White) WH WI-75 E/KM 20:1 Handpiece WH WI-75 LED G 20:1 Handpiece (With light source) WH WS-75 E/KM, 20:1 Handpiece (Dismantleable) WH Disposable Irrigation Tubing Complete (6 pack) WH Irrigation Tubing with Luer-Lock (Disposable green: 10 pack) WH Autoclavable Irrigation Spike Assembly (With roller clamp) WH Autoclavable Pump Tubing with Connects WH Note: Additional contra angles, straight handpieces, angled handpieces and LED handpieces are available upon request. 22 To Order Please Call

23 Southern Implants Inc. Terms and Conditions Thank you f dering Southern Implants products. It is our commitment to provide you with the highest quality dental products. These terms and conditions apply in all instances except where other provisions are agreed to between Southern Implants and its business partners in advance by written agreement. Order Processing & Shipping: Orders will be processed the same day if received befe 2:00 pm PST/5:00 pm EST and will be shipped within the continental US and Canada by second day delivery, unless otherwise specified. Pricing: Prices are subject to change without pri notice. Shipments: Southern Implants is not responsible f any delays in shipment caused by the freight company/courier. Discrepancies: Be sure to check your purchase immediately upon receipt. Any discrepancies must be repted to our customer service team within 48 hours of receipt of shipment. Payment Terms: Payment is due in full within 30 days of invoice date. Payment Options: Prepayment f first time ders will nmally be required. We accept VISA, MasterCard, Discover and American Express. Payment by check should be mailed to our head office address at 5 Holland, Building 209, Irvine CA A fee of $20 will be applied to your account f any returned checks. Contact Customer Service f infmation regarding payment by wire transfer. Service Charges: Service charges of 1 1 2% per month, 18% per annum, will be applied to balances carried over 30 days from invoice date. General Limited Warranty: Southern Implants, Inc. warrants that its products will be free of defects in material and wkmanship and shall be of merchantable quality. This warranty applies only to the iginal purchaser. In the event of a defect, please notify Southern Implants Customer Service of the defect pri to returning any product. Southern Implants, at its option, will either repair replace the product. Southern Implants also offers a Limited Lifetime Warranty on implants and restative components. Southern Implants makes no other warranties, express implied, except as set fth above. Warranty Limitations: Purchaser assumes all risks and liability from the use of these products, whether used separately in combination with other products not provided by Southern Implants. Southern Implants strongly recommends proper implant training and strict adherence to surgical and prosthetic protocols as well as instructions f use when provided with our products. Return/Exchange Policy: F returns exchanges of product contact Southern Implants Customer Service Department at by at customerservice@southernimplants.us your local distribut. Product returns must be unopened, undamaged and received within 30 days of the invoice date f full refund credit accompanied by the Southern Implants Return Fm. Products received within days of the invoice date are subject to a 15% restocking fee. No returns over 90 days from invoice date are accepted. Return Instructions: Wrap package securely and send in either a box padded envelope. Do not send merchandise in a letter envelope due to the risk of damage. Include the completed Southern Implants Return Fm in the package. Insure your shipment appropriately. Southern Implants is not responsible f your shipping cost in returning exchanging product. Returns will not be accepted if freight has been charged to our account with our courier company. Bright Ideas in Dental Implants

24 5 Holland Building 209 Irvine, CA Toll Free Tel Fax Southern Implants Inc. All rights reserved. SIM-11-06OCT