HM220d ADSL Modem User Guide

Size: px
Start display at page:

Download "HM220d ADSL Modem User Guide"

Transcription

1 HM220d ADSL Modem User Guide HM220d ADSL Modem User Guide Ericsson Mobile Communications AB 2000 All rights reserved

2 Copyright This manual is published by Ericsson Mobile Communications AB, without any warranty. Improvements and changes to this manual necessitated by typographical errors, inaccuracies of current information, or improvements to programs and/or equipment, may be made by Ericsson Mobile Communications AB at any time and without notice. Such changes will, however, be incorporated into new editions of this manual. All rights reserved. Ericsson Mobile Communications AB Trademark Identification Statements ACROBAT is a registered trademark of Adobe Systems Incorporated. ACROBAT READER is a registered trademark of Adobe Systems Incorporated. MICROSOFT INTERNET EXPLORER is a trademark of Microsoft Corporation. ERICSSON is a registered trademark of Telefonaktiebolaget L M Ericsson. MICROSOFT, MICROSOFT WINDOWS and MICROSOFT WINDOWS NT are registered trademarks of Microsoft Corporation. NETSCAPE is a registered trademarks of Netscape Communications Corporation. WINDOWS CE, WINDOWS and WINDOWS NT are registered trademarks of Microsoft Corporation. VIRATA is a registered trademark of Virata Corporation. All other trademarks, such as product and service names, are owned by Virata or by third parties. 2 (87) EN/LZT R4

3 EN/LZT R4 3 (87)

4 Innehåll sida 1 Introduction About this User Guide Typographic conventions About the HM220d ADSL modem Package contents Placement of the modem Wall mounting instructions Filter installation 9 2 Installation using Ethernet (for Windows 95 or higher PCs) System requirements Connecting equipment Configuring the PC 12 3 Installation using USB (for Windows 98 PCs) System requirements Connecting equipment Installing USB drivers Configuring the PC 22 4 Installation using USB (for Windows 2000 PCs) System requirements Connecting equipment Installing USB drivers Configuring the PC 32 5 Configuring the modem Accessing the modem's web pages Auto configuration Manual configuration Routed/PPPoA mode Routed/RFC1483 mode Bridged/RFC1483 mode Change configuration Advanced settings 60 4 (87) EN/LZT R4

5 5.5.1 LAN Routed DHCP Bridged Customized Management Product Information Status Update the software 65 6 Operation Modem LED indicator description PipeLock Operational states Power-up diagnostics Initialization Operational PipeLock mode Access restricted Power cycle 69 7 Technical reference Factory default configuration Specification of the HM220d ADSL modem 71 8 Trouble shooting Configuring your PC when not using DHCP Reset the modem to factory default configuration 74 9 Important information Product care and maintenance Licence agreement Licence Term Limited warranty Intended use Limitation of liability Governing law Regulatory information Safety Standards Power Supply 77 EN/LZT R4 5 (87)

6 9.3.3 CE Requirement USA 77 Glossary 80 6 (87) EN/LZT R4

7 Introduction 1 Introduction 1.1 About this User Guide This User Guide describes how to connect, install and configure the HM220d ADSL modem in a PC/Windows environment. The guide also gives information on how the modem operates and some technical and safety information Typographic conventions This User Guide uses the following typographic conventions: Example View Message Source Templates "Message Browser" GUI Design Next Subscription Administration <host> Convention Menus are printed in boldface. Menu choices are printed in boldface Windows are denoted by quotation marks. Window choices are printed in boldface. Buttons (in windows) are printed in Arial boldface. Hyperlinks are underlined. Angle brackets mean that you should replace this part with what is indicated within the brackets. Note: Text written in this manner indicates that what follows presents clarification, specific instructions, comments, or interesting information. 1.2 About the HM220d ADSL modem The Ericsson HM220d ADSL (Asymmetric Digital Subscriber Line) modem provides broadband services into your home using your existing telephone line. Ericsson's HM220d ADSL modems comes in two versions: HM220dp and HM220di. Both products offer the same features, but they do relay on different types of phone lines to provide the ADSL service. HM220dp offers ADSL service over the Plain Old Telephone System or POTS lines, while HM220di uses the Integrated Services Digital Network or ISDN lines to provide the ADSL service. EN/LZT R4 7 (87)

8 Introduction The overwhelming majority of telephone connections in the world are based on POTS. If you have a "normal" or analog telephone in your home, HM220dp is the right modem for you. On the other hand, if you have an ISDN or digital phone, you will need HM220di. If you are not sure which version is the right one for you, please contact your service provider. The modem sends and receives very high-speed signals via the regular telephone network, using Discrete Multi-tone (DMT) Digital Subscriber Line (DSL) transmission. HM220d utilizes the expanded capacity of ADSL-ready telephone lines to handle Internet and multimedia data, while allowing you to make and receive phone calls on the same line. When installing the HM220d ADSL modem, you have the option of connecting it to your computer with either a USB connection (if supported by your computer) or an Ethernet connection. The plug-and-play aspect of USB simplifies installation, requiring only a cable plug-in and the installation of a driver (supplied on the CD-ROM). An Ethernet connection, which requires that a Network Interface Card (NIC) be installed on your computer, allows you to connect multiple computers to a single modem. Once you are connected, a simple press of the PipeLock button (located on top of the modem) guarantees the security of your computer. When PipeLock is activated, the modem remains logged on to the network, but direct communication between your computer and the outside world is blocked. This prevents outsiders from gaining access to any information on your computer, even when you are not there. To resume Internet access, simply press the PipeLock button again. Time and technological development never stand still. Ericsson will keep you updated with the latest technology, and let you download the latest software update. 1.3 Package contents Your package should contain all the components listed below. If anything is missing or damaged, please contact the dealer/service provider from whom the equipment was purchased. The HM220d ADSL modem A power supply adapter with connecting cable Telephone/ADSL cable Ethernet cable USB cable Quick Guide CD-ROM containing the printable User Guide and other utilities. 1.4 Placement of the modem The HM220d ADSL modem can be mounted to the wall, or simply placed on a flat surface. 8 (87) EN/LZT R4

9 Introduction Pick a location for the HM220d ADSL modem that: enables you to view the LEDs on top of the modem allows you to reach and press the PipeLock button on top of the modem is close to a power outlet, phone jack, and the computer (PC) to facilitate connections to these devices does not restrict air flow around the modem allows plenty of room for cables to be routed from the back of the modem without crimping the cables Wall mounting instructions The modem is mounted to the wall using two screws and the two mounting slots on the bottom of the unit. Follow the step-by-step instructions below to mount the modem to the wall: 1 Insert and secure screws to the wall at a distance of 100 mm (3,9"). If needed, drill holes and insert plastic anchors or toggles first. The screws should not be secured flush to the wall. Leave a gap of approximately 1/4" from the wall surface to the bottom of the screw head. 2 Slip the HM220d ADSL modem slots over the screw heads and pull down until the unit is seated securely. A slight adjustment to the screws may be necessary to provide a snug fit to the wall. 1.5 Filter installation To maintain normal phone service, a special filter may need to be installed at your home. This filter, sometimes called a splitter, splits the voice (phone) signal from the ADSL (data) signal. Set-up and installation charges for ADSL service typically include the filter installation. If you are not sure if a filter needs to be installed, contact your service provider. EN/LZT R4 9 (87)

10 Installation using Ethernet (for Windows 95 or higher PCs) 2 Installation using Ethernet (for Windows 95 or higher PCs) This chapter describes the installation and configuration process using the Ethernet interface in Windows 95 (or higher) PCs. The Ethernet interface is used for those computers which do not have a USB interface, or for networking multiple computers on the same broadband line. This requires a Network Interface Card (NIC). The NIC must be installed in the computer and the computer must be configured for TCP/IP. When this option is used, a standard Ethernet cable carries data between the modem and the computer. An Ethernet interface, used in conjunction with a hub, allows you to link up multiple computers to a single HM220d ADSL modem. 2.1 System requirements To successfully connect and install the HM220d ADSL modem to the Ethernet connection you will need the following: An ADSL-ready telephone line 133 MHz Processor and 16 MB RAM. 10Base-T Network Interface Card CD-ROM drive Windows 95 or higher. Internet browser - Internet Explorer 4.06 (or higher) or Netscape Navigator 4.5 (or higher). From the package you will need the following: The modem Telephone/ADSL cable Ethernet cable The power supply adapter with connecting cable. 10 (87) EN/LZT R4

11 Installation using Ethernet (for Windows 95 or higher PCs) 2.2 Connecting equipment To connect your HM220d ADSL modem via the Ethernet interface, follow these steps: 1 Connect one end of the Telephone/ADSL cable to the modem's ADSL port and the other end to the ADSL service port (wall jack or splitter/filter). 2 Connect one end of the Ethernet cable to the ETHERNET port on the back of the modem and connect the other end to the Ethernet 10Base-T network card on your computer. 3 Connect the Power cable to the POWER connector on the back of the modem. Plug the power supply adapter into a power source. Figur 1: Connect via Ethernet interface Assuming the modem has been connected properly, the modem will enter the power-up diagnostics state and verify the integrity of the hardware and software. Please refer to chapter 6.3 Operational states, for further information. When this happens all of the LEDs (light-emitting diodes) on top of the modem will turn ON briefly. When the Power, Ethernet and ADSL LEDs have turned solid yellow, the modem is ready for operation. Figur 2: LED symbols for Power, Ethernet and ADSL If not, check that the cables have been securely connected to both the modem, PC, ADSL service port and power source. EN/LZT R4 11 (87)

12 Installation using Ethernet (for Windows 95 or higher PCs) 2.3 Configuring the PC To be able to access the modem's built in web pages, the IP address for the PC must be on the same IP net as the modem. A recommended way is to configure the PC as a DHCP client and use the DHCP server in the modem to get a correct IP address. If you are unsure how your PC is configured you can use the following instructions to check, and maybe change, your settings. Check TCP/IP settings: 1 From the Start menu select Settings then Control Panel. 2 Double click on the Network icon and the "Network" dialog box appears: Figur 3: Network dialog box 3 Select the TCP/IP protocol (together with the name of the type of physical network adapter installed in your PC). See the above example. 4 Click the Properties button and the "TCP/IP Properties" dialog box will appear. 5 Select the IP Address tab and verify that "Obtain an IP address automatically" is selected. If not, then select this button and click OK. 6 You are now back in the "Network" dialog box. Click OK. 7 Close the Control Panel window. 8 If you made any changes, some configuration files will be copied on your hard disk and if a "Settings Changes" message asks if you wish to restart your computer you should answer Yes. 12 (87) EN/LZT R4

13 Installation using Ethernet (for Windows 95 or higher PCs) By following the next steps you can verify that your PC now has got a new IP address from the modem's DHCP server. Check IP configuration: 1 From the Start menu select Run Type winipcfg and click OK. The "IP Configuration" dialog box appears: Figur 4: IP Configuration dialog box 3 From the scroll down menu at the top, select the Ethernet adapter according to the above example. 4 Verify that the "IP Address" is within the range to If the "IP Address" field is empty or not within the specified range, click the Release All button and then the Renew All button. Verify the "IP Address" again according to step 4. 6 Click OK to close the "IP Configuration" dialog box. Now, you are ready to configure your modem as described in chapter 5 - Configuring the modem. EN/LZT R4 13 (87)

14 Installation using USB (for Windows 98 PCs) 3 Installation using USB (for Windows 98 PCs) This chapter describes the installation and configuration process using the USB interface in Windows 98 PCs. Many computers today are shipped with a Universal Serial Bus (USB) port. With a USB port, a Network Interface Card is not required, but a specific USB driver must be installed on the computer. The USB drivers required for the HM220d ADSL modem is provided on the CD-ROM, and is installed during the installation phase. This driver facilitates communication between the modem and the computer. Unlike an Ethernet connection, a USB connection does not allow for more than one computer to be linked to the modem. 3.1 System requirements To successfully connect and install the HM220d ADSL modem to the USB interface you will need the following: An ADSL-ready telephone line 133 MHz Processor and 16 MB RAM. USB port CD-ROM drive Windows 98 (Windows installation CD might be required when installing the USB driver). Internet browser - Internet Explorer 4.06 (or higher) or Netscape Navigator 4.5 (or higher). From the package you will need the following: The modem Telephone/ADSL cable USB cable The power supply with connecting cable The CD-ROM disk. 14 (87) EN/LZT R4

15 Installation using USB (for Windows 98 PCs) 3.2 Connecting equipment To connect your HM220d ADSL modem via the USB interface, follow these steps: 1 Connect one end of the Telephone/ADSL cable to the modem's ADSL port and the other end to the ADSL service port (wall jack or splitter/filter). 2 Connect the square plug of the USB cable to the USB port on the back of the modem and connect the rectangular plug of the cable to the USB port on the back of your PC. 3 Connect the Power cable to the POWER connector on the back of the modem. Plug the power supply adapter into a power source. Figur 5: Connect via USB interface 4 Once the cables are connected, the PC will automatically search for the correct USB driver, specific to your operating system. Note: The USB drivers are located on the CD-ROM disk that is provided with the modem package. Insert the disk in your PC's CD-ROM drive. Follow the instructions in the next section to install the USB drivers. EN/LZT R4 15 (87)

16 Installation using USB (for Windows 98 PCs) 3.3 Installing USB drivers Two USB drivers will be installed in two successive steps; one for USB and one for the Ethernet emulation of USB. Follow these steps to install the USB drivers: 1 Once the cables are connected, the "New hardware found" dialog is shown for a few seconds and then the Add New Hardware Wizard appears: 2 Click the Next> button. The following dialog appears: 3 Select "Search for the best driver for your device" and click the Next> button. 16 (87) EN/LZT R4

17 Installation using USB (for Windows 98 PCs) 4 Select "CD-ROM drive" and make sure that the provided CD-ROM is in your PCs CD-ROM drive. Click the Next> button. 5 Windows now locates the appropriate files and shows the path. Click the Next> button and the software installation will start. 6 When the appropriate files have been copied the installation complete message is shown: EN/LZT R4 17 (87)

18 Installation using USB (for Windows 98 PCs) 7 Click the Finish button. Windows 98 will now continue to the next phase of the installation. 8 The "New hardware found" dialog is now shown for a few seconds and then the Add New Hardware Wizard starts searching once again for the new driver for "Ericsson HM220d Virtual NIC": 9 Click the Next> button. The following dialog appears: 18 (87) EN/LZT R4

19 Installation using USB (for Windows 98 PCs) 10 Select "Search for the best driver for your device" and click the Next> button. 11 Select "CD-ROM drive" and make sure that the provided CD-ROM is in your PCs CD-ROM drive. Click the Next> button. 12 Windows now locates the appropriate files and shows the path: EN/LZT R4 19 (87)

20 Installation using USB (for Windows 98 PCs) 13 Click the Next> button and the software installation will start. Note: At this point there may be a need for you to insert the Windows installation CD. This CD was included in the original package of your PC and you used it to set up your system. There may be a need to install some Microsoft network components on the PC from the Windows iinstallation CD. Insert the CD in the disk drive if prompted. 14 When all files have been copied the installation complete message is shown: 15 Click the Finish button. The "System Settings Change" dialog will appear. 16 Click Yes to restart your computer. 20 (87) EN/LZT R4

21 Installation using USB (for Windows 98 PCs) When the driver installation has been done and the Power, USB and ADSL LEDs have turned solid yellow, the modem is ready for operation. Figur 16: LED symbols for Power, USB and ADSL EN/LZT R4 21 (87)

22 Installation using USB (for Windows 98 PCs) 3.4 Configuring the PC To be able to access the modem's built in web pages, the IP address for the PC must be on the same IP net as the modem. A recommended way is to configure the PC as a DHCP client and use the DHCP server in the modem to get a correct IP address. If you are unsure how your PC is configured you can use the following instructions to check, and maybe change, your settings. Check TCP/IP settings: 1 From the Start menu select Settings then Control Panel. 2 Double click on the Network icon and the "Network" dialog box appears: Figur 17: Network dialog box 3 Select the TCP/IP protocol togheter with Ericsson HM220d Virtual NIC driver according to the above example. 4 Click the Properties button and the "TCP/IP Properties" dialog box will appear. 5 Select the IP Address tab and verify that "Obtain and IP address automatically" is selected. If not, then select this button and click OK. 6 You are now back in the "Network" dialog box. Click OK. 7 Close the Control Panel window. 8 If you made any changes, some configuration files might be copied on your hard disk and if a "Settings Changes" message asks if you wish to restart your computer you should answer Yes. 22 (87) EN/LZT R4

23 Installation using USB (for Windows 98 PCs) By following the next steps you can verify that your PC now has got a new IP address from the modem's DHCP server. Check IP configuration: 1 From the Start menu select Run Type winipcfg and click OK. The "IP Configuration" dialog box appears: Figur 18: IP Configuration dialog box 3 From the scroll down menu at the top, select the "Virata Virtual Bus Ethernet driver" according to the above example. 4 Verify that the "IP Address" is within the range to If the "IP Address" field is empty or not within the specified range, click the Release All button and then the Renew All button. Verify the "IP Address" again according to step 4. 6 Click OK to close the "IP Configuration" dialog box. You are now ready to configure your modem as described in chapter 5 - Configuring the modem. EN/LZT R4 23 (87)

24 Installation using USB (for Windows 2000 PCs) 4 Installation using USB (for Windows 2000 PCs) This chapter describes the installation and configuration process using the USB interface in Windows 2000 PCs. Many computers today are shipped with a Universal Serial Bus (USB) port. With a USB port, a Network Interface Card is not required, but a specific USB driver must be installed on the computer. The USB driver required for the HM220d ADSL modem is provided on the CD-ROM, and is installed during the installation phase. This driver facilitates communication between the modem and the computer. Unlike an Ethernet connection, a USB connection does not allow for more than one computer to be linked to the modem. 4.1 System requirements To successfully connect and install the HM220d ADSL modem to the USB interface you will need the following: An ADSL-ready telephone line 133 MHz Processor and 16 MB RAM. USB port CD-ROM drive Windows 2000 Internet browser - Internet Explorer 4.06 (or higher) or Netscape Navigator 4.5 (or higher). From the package you will need the following: The modem Telephone/ADSL cable USB cable The power supply adapter with connecting cable The CD-ROM disk. 24 (87) EN/LZT R4

25 Installation using USB (for Windows 2000 PCs) 4.2 Connecting equipment To connect your HM220d ADSL modem via the USB interface, follow these steps: 1 Connect one end of the Telephone/ADSL cable to the modem's ADSL port and the other end to the ADSL service port (wall jack or splitter/filter). 2 Connect the square plug of the USB cable to the USB port on the back of the modem and connect the rectangular plug of the cable to the USB port on the back of your PC. 3 Connect the Power cable to the POWER connector on the back of the modem. Plug the power supply adapter into a power source. Figur 19: Connect via USB interface 4 Once the cables are connected, the PC will automatically search for the correct USB driver, specific to your operating system. Note: The USB drivers are located on the CD-ROM disk that is provided with the modem package. Insert the disk in your PC's CD-ROM drive. Follow the instructions in the next section to install the USB drivers. EN/LZT R4 25 (87)

26 Installation using USB (for Windows 2000 PCs) 4.3 Installing USB drivers Two USB drivers will be installed in two successive steps; one for USB and one for the Ethernet emulation of USB. Follow these steps to install the USB drivers: 1 Once the cables are connected, the "Found new hardware" dialog is shown for a few seconds and then the Found New Hardware Wizard appears: 2 Click the Next> button. The following dialog appears: 3 Select "Search for a suitable driver for my device" and click the Next> button. 26 (87) EN/LZT R4

27 Installation using USB (for Windows 2000 PCs) 4 Select "CD-ROM drive" and make sure that the provided CD-ROM is in your PCs CD-ROM drive. Click the Next> button. 5 Windows now locates the appropriate files and shows the path. Click the Next> button and the software installation will start. 6 When the appropriate files have been copied the installation complete message is shown: EN/LZT R4 27 (87)

28 Installation using USB (for Windows 2000 PCs) 7 Click the Finish button. Windows 2000 will now continue to the next phase of the installation. 8 The "Found new hardware" dialog is now shown for a few seconds and then the Found New Hardware Wizard starts once again: 9 Click the Next> button. The following dialog appears: 28 (87) EN/LZT R4

29 Installation using USB (for Windows 2000 PCs) 10 Select "Search for a suitable driver for my device" and click the Next> button. 11 Select "CD-ROM drive" and make sure that the provided CD-ROM is in your PCs CD-ROM drive. Click the Next> button. 12 Windows now locates the appropriate files and shows the path: EN/LZT R4 29 (87)

30 Installation using USB (for Windows 2000 PCs) 13 Click the Next> button and the following dialog appears: 14 Click the Yes button to start the installation. When the installation is finished the installation complete message is shown: 30 (87) EN/LZT R4

31 Installation using USB (for Windows 2000 PCs) 15 Click the Finish button. When the driver installation has been done and the Power, USB and ADSL LEDs have turned solid yellow, the modem is ready for operation. Figur 31: LED symbols for Power, USB and ADSL EN/LZT R4 31 (87)

32 Installation using USB (for Windows 2000 PCs) 4.4 Configuring the PC To be able to access the modem's built in web pages, the IP address for the PC must be on the same IP net as the modem. A recommended way is to configure the PC as a DHCP client and use the DHCP server in the modem to get a correct IP address. If you are unsure how your PC is configured you can use the following instructions to check, and maybe change, your settings. Check TCP/IP settings: 1 From the Start menu select Settings then Control Panel. 2 Double click on the Network and Dial-up Connections. A new view appears including icons for Local Area Connections. 3 Double click on the Local Area Connection icon for the Ericsson HM220d Virtual NIC driver. If you have several icons be sure you choose the right one. The "Local Area Connection Status" dialog box appears. 4 Click the Properties button to open the "Local Area Connection Properties" dialog box: Figur 32: Local Area Connection Properties dialog box 5 Select "Internet Protocol (TCP/IP)" according to the above example. 6 Click the Properties button and the "Internet Protocol (TCP/IP) Properties" dialog box will appear. 7 Verify that "Obtain an IP address automatically" is selected. If not, then select this button and click OK. 32 (87) EN/LZT R4

33 Installation using USB (for Windows 2000 PCs) 8 You are now back in the "Local Area Connection Properties" dialog box. Click OK. 9 Click Close in the "Local Area Connection Status" dialog box and close the Network and Dial-up Connections window. By following the next steps you can verify that your PC now has got a new IP address from the modem's DHCP server. Check IP configuration: 1 From the Start menu select Programs -> Accessories -> Command Prompt. The "Command Prompt" window appears. 2 Type ipconfig and verify that the "IP Address" is within the range to If the "IP Address" is not within the specified range, type ipconfig/release and when the C:\> appears again type ipconfig/renew Verify the "IP Address" again according to step 2. 4 Close the "Command Prompt" window. Now you are ready to configure your modem as described in chapter 5 - Configuring the modem. EN/LZT R4 33 (87)

34 Configuring the modem 5 Configuring the modem The configuration of the HM220d ADSL modem is done either by using the Configuration Wizard or a flat structure. The Configuration Wizard is available in five languages: English, Français, Deutsch, Español and Português. Everything is done by using a web browser (Internet Explorer 4.01 or higher / Netscape Navigator 4.5 or higher) and accessing the web-based, graphical interface that comes installed on the modem itself. The HM220d ADSL modem is shipped from the factory with particular default settings. However, you may need to change some of them depending on what service your Internet Service Provider (ISP) is providing. 5.1 Accessing the modem's web pages Access the modem's web pages by starting your web browser and enter the IP address of the modem - -in the "Location" or "Address" area where you enter web page addresses. Figur 33: Enter the IP address of the modem The HM220d ADSL modem's "Welcome" page appears. Figur 34: Welcome page 34 (87) EN/LZT R4

35 Configuring the modem This is the opening page of the HM220d ADSL modem's local web pages. Click on the Wizard button, in the left column, to start the Configuration Wizard (available in five languages) which walks you through the configuration process step by step (recommended the first time). Use the Product Info and Status buttons to see views of the current status of the modem and other product information. Described in section Product Information and Status. The Advanced Settings button will bring up a new window including all parameters that can be set. This view can be used when reconfiguring the modem or just checking the settings. Described in section Advanced settings. Click on the Wizard button to enter the Configuration Wizard. Select language Figur 35: Configuration wizard - Select language This is the first page of the Configuration Wizard where you select which language - English, Français, Deutsch, Español or Português - you wish the information to be presented to you. All pages in the Configuration Wizard have the same buttons at the bottom: Help - brings up a help window Back - takes you back to the previous page of the wizard EN/LZT R4 35 (87)

36 Configuring the modem Next - brings up the next page of the wizard Cancel - closes the wizard and no settings will be saved. Note: If you have received any documentation from your ISP/service provider, please have this at hand when carrying out the configuration process. Select the appropriate language and click on Next. The configuration process is available in two different configuration modes as shown on the next page in the wizard. Select configuration mode Figur 36: Configuration wizard - Select configuration mode Auto configuration means that you must have been provided with auto configuration strings from your ISP/service provider. Auto configuration strings look like XXXX-XXXX-XXXX-XXXX and come in pairs; one A string and one B string. These strings contain all the detailed information needed for a correct operation of your modem, and then just a minimum of other settings has to be done. 36 (87) EN/LZT R4

ADSL Modem. HM210dp/di. User Guide

ADSL Modem. HM210dp/di. User Guide ADSL Modem HM210dp/di User Guide ADSL Modem HM210dp/di. User Guide Copyright Ericsson AB 2003 All Rights Reserved Disclaimer The contents of this document are subject to revision without notice due to

More information

1. Hardware Installation

1. Hardware Installation 4 Port 10/100M Internet Broadband Router with USB Printer server Quick Installation Guide #4824904AXZZ0 1. Hardware Installation A. System Requirement Before you getting started, make sure that you meet

More information

Chapter 3 Connecting the Router to the Internet

Chapter 3 Connecting the Router to the Internet Chapter 3 Connecting the Router to the Internet This chapter describes how to set up the router on your Local Area Network (LAN) and connect to the Internet. It describes how to configure your DG834GT

More information

ADSL MODEM. User Manual V1.0

ADSL MODEM. User Manual V1.0 ADSL MODEM User Manual V1.0 CONTENTS 1.OVERVIEW... 3 1.1 ABOUT ADSL... 3 1.2 ABOUT ADSL2/2+... 3 1.3 FEATURES... 3 2 SPECIFICATION... 4 2.1 INTERFACE INTRODUCTION... 4 2.1.1 INDICATOR AND INTERFACE...

More information

Prestige 623R-T. Quick Start Guide. ADSL Dual-link Router. Version 3.40

Prestige 623R-T. Quick Start Guide. ADSL Dual-link Router. Version 3.40 Prestige 623R-T ADSL Dual-link Router Quick Start Guide Version 3.40 February 2004 Introducing the Prestige The Prestige 623R-T ADSL Dual-link Router is the ideal all-in-one device for small networks connecting

More information

DSL-2600U. User Manual V 1.0

DSL-2600U. User Manual V 1.0 DSL-2600U User Manual V 1.0 CONTENTS 1. OVERVIEW...3 1.1 ABOUT ADSL...3 1.2 ABOUT ADSL2/2+...3 1.3 FEATURES...3 2 SPECIFICATION...4 2.1 INDICATOR AND INTERFACE...4 2.2 HARDWARE CONNECTION...4 2.3 LED STATUS

More information

Chapter 2 Preparing Your Network

Chapter 2 Preparing Your Network Chapter 2 Preparing Your Network This document describes how to prepare your network to connect to the Internet through a router and how to verify the readiness of your broadband Internet service from

More information

Quick Start Guide. RV 120W Wireless-N VPN Firewall. Cisco Small Business

Quick Start Guide. RV 120W Wireless-N VPN Firewall. Cisco Small Business Quick Start Guide Cisco Small Business RV 120W Wireless-N VPN Firewall Package Contents Wireless-N VPN Firewall Ethernet Cable Power Adapter Quick Start Guide Documentation and Software on CD-ROM Welcome

More information

Linksys Gateway SPA2100-SU Manual

Linksys Gateway SPA2100-SU Manual Linksys Gateway SPA2100-SU Manual Manuel de l'utilisateur Table of Contents Looking for Basic Setup Instructions?... 3 Most Recent Version of this Manual... 3 Advanced Setup Instructions... 4 Wiring Your

More information

Frontier DSL SelfConnect Guide

Frontier DSL SelfConnect Guide Frontier DSL SelfConnect Guide Frontier DSL Self-Installation Guide Table of Contents Getting Started...2 Customer and Computer Requirements...2...3 STEP 1: Install Microfilters...3 STEP 2: Install Your

More information

3.5 EXTERNAL NETWORK HDD. User s Manual

3.5 EXTERNAL NETWORK HDD. User s Manual 3.5 EXTERNAL NETWORK HDD User s Manual Table of Content Before You Use Key Features H/W Installation Illustration of Product LED Definition NETWORK HDD Assembly Setup the Network HDD Home Disk Utility

More information

Broadband ADSL2+ Modem DM111PSPv2

Broadband ADSL2+ Modem DM111PSPv2 Broadband ADSL2+ Modem DM111PSPv2 User Manual 350 East Plumeria Drive San Jose, CA 95134 USA August 2011 202-10913-01 v1.0 2011 NETGEAR, Inc. All rights reserved No part of this publication may be reproduced,

More information

UTStarcom UT-300R2U. ADSL Modem. UTStarcom, Inc. USER GUIDE. Release: 1.0. Doc. Code:

UTStarcom UT-300R2U. ADSL Modem. UTStarcom, Inc. USER GUIDE. Release: 1.0. Doc. Code: UTStarcom UT-300R2U ADSL Modem USER GUIDE Release: 1.0 Doc. Code: UTStarcom, Inc. Copyright 2005 UTStarcom, Inc. All rights reserved. No part of this documentation may be reproduced in any form or by any

More information

Prestige 650R-31/33 Read Me First

Prestige 650R-31/33 Read Me First Prestige 650R-31/33 Read Me First Prestige Rear Panel Connections PORT DSL CONSOLE LAN 10/100M POWER Connect to a telephone jack using a telephone wire. CONNECTION Connect to a serial port (COM port) on

More information

Data Cable Modem. Model# U10C018. User s Guide

Data Cable Modem. Model# U10C018. User s Guide Data Cable Modem Model# U10C018 User s Guide Rev. 1.02 July 26 st, 2004 Contents 1. BEFORE YOU BEGIN...4 Understand the Cable Modem s Features...4 Contact Your Local Cable Operator...4 Prepare Your Area

More information

Cisco 837 Router and Cisco SOHO 97 Router Cabling and Setup

Cisco 837 Router and Cisco SOHO 97 Router Cabling and Setup English CHAPTER 1 Cisco 837 Router and Cisco SOHO 97 Router Cabling and Setup Cisco One-Year Limited Hardware Warranty Terms Easy Installation: Try These Steps First! (CRWS Users) Overview Parts List Verify

More information

Wireless Router Setup Manual

Wireless Router Setup Manual Wireless Router Setup Manual NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 208-10082-02 2006-04 2006 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR is a trademark of Netgear,

More information

ADSL Modem Router Setup Manual

ADSL Modem Router Setup Manual ADSL Modem Router Setup Manual NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 208-10026-01 2006-2 2006 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR is a trademark of Netgear,

More information

CPEi 800/825 Series. User Manual. * Please see the Introduction Section

CPEi 800/825 Series. User Manual. * Please see the Introduction Section CPEi 800/825 Series User Manual * Please see the Introduction Section Contents Introduction...iii Chapter 1: CPEi 800/825 User Guide Overview... 1-1 Powerful Features in a Single Unit... 1-2 Front of the

More information

P-660R-TxC Series. ADSL2+ Access Router. Quick Start Guide

P-660R-TxC Series. ADSL2+ Access Router. Quick Start Guide P-660R-TxC Series ADSL2+ Access Router Quick Start Guide Version 3.40 Edition 1 2/2006 Overview The P-660R-TxC ADSL2+ access router is the ideal device for small networks connecting to the Internet via

More information

Cisco 831 Router and Cisco SOHO 91 Router Cabling and Setup Quick Start Guide

Cisco 831 Router and Cisco SOHO 91 Router Cabling and Setup Quick Start Guide English CHAPTER 1 Cisco 831 Router and Cisco SOHO 91 Router Cabling and Setup Quick Start Guide Cisco One-Year Limited Hardware Warranty Terms Easy Installation: Try These Steps First! (CRWS Users) Overview

More information

Quick Installation Guide DSL-2750U/NRU. 3G/ADSL/Ethernet Router with Wi-Fi and Built-in Switch

Quick Installation Guide DSL-2750U/NRU. 3G/ADSL/Ethernet Router with Wi-Fi and Built-in Switch DSL-2750U/NRU 3G/ADSL/Ethernet Router with Wi-Fi and Built-in Switch BEFORE YOU BEGIN Delivery Package Router DSL-2750U/NRU Power adapter RJ-11 telephone cable Straight-through Ethernet cable (CAT 5E)

More information

ADSL Router Installation Guide. 1 Panel Illustration Package Contains Hardware Installation Driver Installation...

ADSL Router Installation Guide. 1 Panel Illustration Package Contains Hardware Installation Driver Installation... ADSL Router Installation Guide 1 Panel Illustration... 1 1.1 Single-Port ADSL Router Front Panel Indicators and Descriptions...1 1.2 Four-Port ADSL Router Front Panel Indicators and Descriptions...1 1.3

More information

Preparing the Computers for TCP/IP Networking

Preparing the Computers for TCP/IP Networking Configuration Preparing the Computers for TCP/IP Networking Configuring Windows 98, and ME for TCP/IP Networking Verifying TCP/IP Properties Configuring Windows 2000 or XP for IP Networking Install or

More information

Comtrend 1 Port Router Installation Guide CT-5072T

Comtrend 1 Port Router Installation Guide CT-5072T Comtrend 1 Port Router Installation Guide CT-5072T 1 Installing Access Point s DSL Service with a Comtrend Router Thank you for selecting Access Point, Inc. to be your Internet service provider. This guide

More information

Connecting to the Internet. LAN Hardware Requirements. Computer Requirements. LAN Configuration Requirements

Connecting to the Internet. LAN Hardware Requirements. Computer Requirements. LAN Configuration Requirements Connecting to the Internet LAN Hardware Requirements Computer Requirements LAN Configuration Requirements Installation Performed by Time Warner Cable Technician Connecting via Ethernet Connecting via USB

More information

Acer ADSL Surf USB Modem

Acer ADSL Surf USB Modem . Acer ADSL Surf USB Modem Installation Guide Acer European Support: http://support.acer-euro.com 1 Table of Contents. 1. About The Manual 2. Specification 3. Preface Chapter 1 : Chapter 2 : ADSL Overview

More information

Chapter 1 Installing the Gateway

Chapter 1 Installing the Gateway Chapter 1 Installing the Gateway This chapter describes how to set up the wireless voice gateway on your Local Area Network (LAN), connect to the Internet, and perform basic configuration. For information

More information

SPEED TOUCH PC. ADSL PC Network Interface Card. Installation Guide. Microsoft Windows 95A, 98 and NT4.0. VERSION 2.1.1 for CD-ROM Installation

SPEED TOUCH PC. ADSL PC Network Interface Card. Installation Guide. Microsoft Windows 95A, 98 and NT4.0. VERSION 2.1.1 for CD-ROM Installation SPEED TOUCH PC ADSL PC Network Interface Card Microsoft Windows 95A, 98 and NT4.0 VERSION 2.1.1 for CD-ROM Installation November 9, 1999 SPEED TOUCH PC ADSL PC Network Interface Card Microsoft Windows

More information

DSL-G604T Wireless ADSL Router

DSL-G604T Wireless ADSL Router This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. DSL-G604T Wireless ADSL Router Before You Begin 1. If you purchased this Router to share

More information

2 Setting Up the Hardware for a Wired Ethernet Network... 13. 3 Setting Up the Software for an Ethernet Network... 21

2 Setting Up the Hardware for a Wired Ethernet Network... 13. 3 Setting Up the Software for an Ethernet Network... 21 Contents 1 Networking Basics............................................... 1 Selecting a network connection........................................ 2 Wired Ethernet network...........................................

More information

Phone Adapter. with 2 Ports for Voice-over-IP. Installation and Troubleshooting Guide. Model No. PAP2 Ver. 2. Voice

Phone Adapter. with 2 Ports for Voice-over-IP. Installation and Troubleshooting Guide. Model No. PAP2 Ver. 2. Voice Phone Adapter with 2 Ports for Voice-over-IP Voice Installation and Troubleshooting Guide Model No. PAP2 Ver. 2 Copyright and Trademarks Specifications are subject to change without notice. Linksys is

More information

Prestige 202H Plus. Quick Start Guide. ISDN Internet Access Router. Version 3.40 12/2004

Prestige 202H Plus. Quick Start Guide. ISDN Internet Access Router. Version 3.40 12/2004 Prestige 202H Plus ISDN Internet Access Router Quick Start Guide Version 3.40 12/2004 Table of Contents 1 Introducing the Prestige...3 2 Hardware Installation...4 2.1 Rear Panel...4 2.2 The Front Panel

More information

Prestige 660R-6x Read Me First

Prestige 660R-6x Read Me First Prestige 660R-6x Read Me First Prestige Rear Panel Connections DSL PORT CONNECTION Connect the DSL port on the Prestige to the wall jack using the included DSL cable (telephone wire). Connect the micro

More information

c. Securely insert the Ethernet cable from your cable or DSL modem into the Internet port (B) on the WGT634U. Broadband modem

c. Securely insert the Ethernet cable from your cable or DSL modem into the Internet port (B) on the WGT634U. Broadband modem Start Here Follow these instructions to set up your router. Verify That Basic Requirements Are Met Assure that the following requirements are met: You have your broadband Internet service settings handy.

More information

Prestige 630M. ADSL USB Modem. Quick Start Guide

Prestige 630M. ADSL USB Modem. Quick Start Guide Prestige 630M ADSL USB Modem Quick Start Guide Table of Contents Chapter 1 Driver Installation... 1-1 Chapter 2 Install and Configure your Modem... 2-1 2.1 Rear Panel Connections... 2-1 2.2 Front Panel

More information

Multifunctional Broadband Router User Guide. Copyright Statement

Multifunctional Broadband Router User Guide. Copyright Statement Copyright Statement is the registered trademark of Shenzhen Tenda Technology Co., Ltd. Other trademark or trade name mentioned herein are the trademark or registered trademark of above company. Copyright

More information

Check Your Package Contents. CD-ROM containing Manual and Warranty

Check Your Package Contents. CD-ROM containing Manual and Warranty This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. DVA-G3340S Wireless VoIP Router Before You Begin If you purchased this Router to share your

More information

DVG-2101SP VoIP Telephone Adapter

DVG-2101SP VoIP Telephone Adapter This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 6.2.3. DVG-2101SP VoIP Telephone Adapter Before You Begin 1. If you purchased this VoIP Telephone

More information

Broadband Router ESG-103. User s Guide

Broadband Router ESG-103. User s Guide Broadband Router ESG-103 User s Guide FCC Warning This equipment has been tested and found to comply with the limits for Class A & Class B digital device, pursuant to Part 15 of the FCC rules. These limits

More information

Internet Access to a DVR365

Internet Access to a DVR365 Configuration Details : Internet Access to DVR365 Page : 1 Internet Access to a DVR365 These instructions will show you how to connect your DVR365 to the internet via an ADSL broadband modem/router. The

More information

ADSL2+ Service Gateway

ADSL2+ Service Gateway ADSL2+ Service Gateway HM410dp User Guide ADSL2+ Service Gateway HM410dp. User Guide Copyright Ericsson AB - 2004 All Rights Reserved Disclaimer No part of this document may be reproduced in any form without

More information

Chapter 1 Connecting Your Router to the Internet

Chapter 1 Connecting Your Router to the Internet Chapter 1 Connecting Your Router to the Internet This chapter describes how to configure your DG834N RangeMax TM NEXT Wireless ADSL2+ Modem Router Internet connection.when you perform the initial configuration

More information

Networking. General networking. Networking overview. Common home network configurations. Wired network example. Wireless network examples

Networking. General networking. Networking overview. Common home network configurations. Wired network example. Wireless network examples Networking General networking Networking overview A network is a collection of devices such as computers, printers, Ethernet hubs, wireless access points, and routers connected together for communication

More information

Omni 56K USB Lite Quick Start Guide

Omni 56K USB Lite Quick Start Guide Omni 56K USB Lite Quick Start Guide ZyXEL TOTAL INTERNET ACCESS SOLUTION 1. Hardware Installation Connect your modem to your analog phone or fax. Use the phone cord included to connect to the phone jack

More information

Contents. Section A Networking Basics... 1. 1 Learning the Basics... 3. Section B Wired Ethernet Networking... 17

Contents. Section A Networking Basics... 1. 1 Learning the Basics... 3. Section B Wired Ethernet Networking... 17 Contents Section A Networking Basics...................................... 1 1 Learning the Basics............................................. 3 Selecting a network connection........................................

More information

Connecting to the Internet

Connecting to the Internet Connecting to the Internet Connecting the Gateway to the Internet Configuration of TCP/IP Protocol Installing the USB Drivers Connecting Ethernet Network Devices Connecting USB Network Devices Connecting

More information

Installing the Microsoft Network Driver Interface

Installing the Microsoft Network Driver Interface Installing the Microsoft Network Driver Interface Overview This guide explains how to install the PictureTel Live200 Microsoft Network Driver Interface (NDIS) software you have downloaded from PictureTel's

More information

Quick Installation Guide DSL-2750U. 3G/ADSL/Ethernet Router with Wi-Fi and Built-in Switch

Quick Installation Guide DSL-2750U. 3G/ADSL/Ethernet Router with Wi-Fi and Built-in Switch DSL-2750U 3G/ADSL/Ethernet Router with Wi-Fi and Built-in Switch BEFORE YOU BEGIN Delivery Package Router DSL-2750U Power adapter DC 12V/1A RJ-11 telephone cable Ethernet cable (CAT 5E) Splitter (brochure).

More information

DSL-584T ADSL2+ Router User Guide

DSL-584T ADSL2+ Router User Guide DSL-584T ADSL2+ Router User Guide January 2006 ESL584TEU.A1G FCC Warning This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not

More information

Chapter 1 Connecting the Router to the Internet

Chapter 1 Connecting the Router to the Internet Chapter 1 Connecting the Router to the Internet This chapter describes how to set up the router on your Local Area Network (LAN) and connect to the Internet. It describes how to set up your wireless ADSL

More information

DI-634M. Check Your Package Contents. This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 7.

DI-634M. Check Your Package Contents. This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 7. This product can be set up using any current web browser, i.e., Internet Explorer 6 or Netscape Navigator 7. DI-634M 108G MIMO Wireless Router Before You Begin 1. If you purchased this router to share

More information

HP-1000 Powerline USB Adapter

HP-1000 Powerline USB Adapter HP-1000 Powerline USB Adapter User s manual BEFORE INSTALLATION Plan ahead the installation of your powerline network. Note: You will need at least two powerline adapters to create a powerline network.

More information

Quick Start Guide. Cisco SPA100 Series Analog Telephone Adapters. SPA112 Two Port Phone Adapter SPA122 ATA with Router

Quick Start Guide. Cisco SPA100 Series Analog Telephone Adapters. SPA112 Two Port Phone Adapter SPA122 ATA with Router Quick Start Guide Cisco SPA100 Series Analog Telephone Adapters SPA112 Two Port Phone Adapter SPA122 ATA with Router Package Contents Analog Telephone Adapter Ethernet Cable Power Adapter Quick Start Guide

More information

HP-1000 Powerline Ethernet Adapter

HP-1000 Powerline Ethernet Adapter HP-1000 Powerline Ethernet Adapter User s manual BEFORE INSTALLATION Plan ahead the installation of your powerline network. Note: You will need at least two powerline adapters to create a powerline network.

More information

DSL-520T ADSL Router User Guide

DSL-520T ADSL Router User Guide DSL-520T ADSL Router User Guide May 2006 ESL520TEU.A1G Table Of Contents BEFORE YOU START...1 Installation Overview...1 Setup Wizard...1 Packing List...1 Installation Notes...2 INTRODUCTION...5 Router

More information

DSL Installation Guide

DSL Installation Guide DSL Installation Guide Thank you for choosing Integra Telecom s DSL service! Introduction This guide will walk you through the DSL installation process and will help you configure a computer to access

More information

USB/Ethernet DSL Modem Model #: GT701 User Manual

USB/Ethernet DSL Modem Model #: GT701 User Manual USB/Ethernet DSL Modem Model #: GT701 User Manual Solutions for the Digital Life Table of Contents 1 Introduction 1 Package Contents 1 Minimum System Requirements 2 Features 2 Getting to Know the Modem

More information

Connecting the DG-102S VoIP Gateway to your network

Connecting the DG-102S VoIP Gateway to your network Contents of Package: DG-102S VoIP Station Gateway Power adapter CD-ROM, including User s Manual Quick Install Guide Requirements: RS-232 Console Cable Two RJ-45 CAT-5 Straight-Through Cables For more information

More information

Chapter 15: Advanced Networks

Chapter 15: Advanced Networks Chapter 15: Advanced Networks IT Essentials: PC Hardware and Software v4.0 1 Determine a Network Topology A site survey is a physical inspection of the building that will help determine a basic logical

More information

Please use only wired network connections to configure the Router.

Please use only wired network connections to configure the Router. Note Please use only wired network connections to configure the Router. Power down all of your network devices, including your computer(s) and the Modem Router. If you currently use a modem, disconnect

More information

Actiontec GT784WN Router

Actiontec GT784WN Router Table of Contents General Information...1 Verify Computer Settings...1 Router Installation...3 Configuring Your Router...3 Configuring Your Computer...7 Configuring Your Email...9 General Information Router

More information

STATIC IP SET UP GUIDE VERIZON 7500 WIRELESS ROUTER/MODEM

STATIC IP SET UP GUIDE VERIZON 7500 WIRELESS ROUTER/MODEM STATIC IP SET UP GUIDE VERIZON 7500 WIRELESS ROUTER/MODEM Verizon High Speed Internet for Business Verizon High Speed Internet for Business SETTING UP YOUR NEW STATIC IP CONNECTION AND IP ADDRESS(ES) This

More information

D-Link DSL-320B User Manual 2

D-Link DSL-320B User Manual 2 Table of Contents Table of Contents TABLE OF CONTENTS...2 PACKAGE CONTENTS...3 SYSTEM REQUIREMENTS...3 FEATURES...4 HARDWARE OVERVIEW...5 Connections...5 LEDs...6 INSTALLATION...7 BEFORE YOU BEGIN...7

More information

Ericsson W25. Mobile Networks. Quick Installation Guide

Ericsson W25. Mobile Networks. Quick Installation Guide Ericsson W25 Fixed Wireless Terminal for WCDMA/HSDPA Mobile Networks Quick Installation Guide Table of Contents INTRODUCTION... 3 Package Contents... 3 Requirements... 3 INSTALLATION... 4 Unit Preparation...

More information

Attachment E ACCESSING THE FCC NETWORK USING WINDOWS 95/98 FOR ULS FILING

Attachment E ACCESSING THE FCC NETWORK USING WINDOWS 95/98 FOR ULS FILING Attachment E ACCESSING THE FCC NETWORK USING WINDOWS 95/98 FOR ULS FILING This attachment describes how to use Windows 95/98 Dial-Up Networking to establish a direct connection from your PC to the FCC

More information

DSL-504T ADSL Router User s Guide

DSL-504T ADSL Router User s Guide DSL-504T ADSL Router User s Guide March 2005 651SL504T045 i FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.

More information

If you are unable to set up your Linksys Router by using one of the above options, use the steps below to manually configure your router.

If you are unable to set up your Linksys Router by using one of the above options, use the steps below to manually configure your router. This article describes how to manually configure a Linksys Router for broadband DSL that uses PPPoE (Point-to-Point Protocol over Ethernet) for authentication. For automatic configuration options, please

More information

AirStation VPN Setup Guide WZR-RS-G54

AirStation VPN Setup Guide WZR-RS-G54 AirStation VPN Setup Guide WZR-RS-G54 WZR-RS-G54 Introduction The WZR-RS-G54 s VPN services allows users to securely access their home or office network from anywhere in the world. All services available

More information

Network Setup Guide. 1 Glossary. 2 Operation. 1.1 Static IP. 1.2 Point-to-Point Protocol over Ethernet (PPPoE)

Network Setup Guide. 1 Glossary. 2 Operation. 1.1 Static IP. 1.2 Point-to-Point Protocol over Ethernet (PPPoE) Network Setup Guide 1 Glossary 1.1 Static IP Computers are communicated and recognized by their own unique IP addresses over the Internet. Static IP provided by your ISP (Internet Service Provider) means

More information

DSL-360T ADSL Modem User s Manual

DSL-360T ADSL Modem User s Manual DSL-360T ADSL Modem User s Manual (January 2004) 651D360T.015 DSL-360T DSL Modem User s Guide CE Mark Warning This is a Class B product. In a domestic environment, this product may cause radio interference

More information

OfficeConnect Internet Firewall 25 Internet Firewall DMZ. QuickStart Guide (3C16770, 3C16771)

OfficeConnect Internet Firewall 25 Internet Firewall DMZ. QuickStart Guide (3C16770, 3C16771) OfficeConnect Internet Firewall 25 Internet Firewall DMZ QuickStart Guide (3C16770, 3C16771) Checking Package Contents Getting Started Thank you for purchasing the OfficeConnect Internet Firewall. The

More information

OvisLink OV804WVA Quick Installation Guide

OvisLink OV804WVA Quick Installation Guide OvisLink OV804WVA Quick Installation Guide 1 Indicators and Interfaces 1.1 Front Panel LED Color Status Description Power Red DSL Internet Red WAN LAN4-1 Off Power off. The initialization is normal. Initiating.

More information

A Division of Cisco Systems, Inc. Broadband Router. with 2 Phone Ports. Voice Installation and Troubleshooting Guide RTP300. Model No.

A Division of Cisco Systems, Inc. Broadband Router. with 2 Phone Ports. Voice Installation and Troubleshooting Guide RTP300. Model No. A Division of Cisco Systems, Inc. Broadband Router with 2 Phone Ports Voice Installation and Troubleshooting Guide Model No. RTP300 Copyright and Trademarks Specifications are subject to change without

More information

DSL-502T ADSL Router User s Guide

DSL-502T ADSL Router User s Guide DSL-502T ADSL Router User s Guide (December 2004) 651SL502T045 FCC Warning This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC

More information

DIR-100. Before You Begin. Check Your Package Contents. Triple Play Router

DIR-100. Before You Begin. Check Your Package Contents. Triple Play Router This product can be set up using a current web browser. DIR-100 Triple Play Router Before You Begin Make sure you have all the necessary information and equipment on hand before beginning the installation.

More information

ARESCOM NetDSL 800 ADSL Modem version 5.2b1. User s Guide

ARESCOM NetDSL 800 ADSL Modem version 5.2b1. User s Guide ARESCOM NetDSL 800 ADSL Modem version 5.2b1 User s Guide Published April 2000 Copyright Copyright 1996, 1997, 1998, 1999, 2000 ARESCOM, Inc. All rights reserved. No part of this documentation or software

More information

Application Note Configuring the UGate 3000 for use with ClipMail Pro and ClipExpress

Application Note Configuring the UGate 3000 for use with ClipMail Pro and ClipExpress Application Note Configuring the UGate 3000 for use with Introduction This Application Note guides the ClipMail user through the UGate gateway configuration process by using a simple dial up connection

More information

ProSafe Plus Switch Utility

ProSafe Plus Switch Utility ProSafe Plus Switch Utility User Guide 350 East Plumeria Drive San Jose, CA 95134 USA September 2010 202-10524-03 v1.0 ProSafe Plus Switch Utility User Guide 2010 NETGEAR, Inc. All rights reserved. No

More information

You may refer the Quick Installation Guide in the package box for more information.

You may refer the Quick Installation Guide in the package box for more information. Hardware Installation: 1. Turn off your modem. 2. Use one Ethernet cable to connect your modem to WAN port (Blue) port of BR-6228nC. 3. Use another Ethernet cable to connect your PC to one LAN Port (Yellow)

More information

BiPAC 7404V series. VoIP/(802.11g) ADSL2+ (VPN) Firewall Router. Quick Start Guide

BiPAC 7404V series. VoIP/(802.11g) ADSL2+ (VPN) Firewall Router. Quick Start Guide BiPAC 7404V series VoIP/(802.11g) ADSL2+ (VPN) Firewall Router Quick Start Guide VoIP/(802.11g) ADSL2+ (VPN) Firewall Router For more detailed instructions on configuring and using the Billion VoIP/(802.11g)

More information

MN-700 Base Station Configuration Guide

MN-700 Base Station Configuration Guide MN-700 Base Station Configuration Guide Contents pen the Base Station Management Tool...3 Log ff the Base Station Management Tool...3 Navigate the Base Station Management Tool...4 Current Base Station

More information

RedRapid X WIRELESS MODEM ROUTER. Quick Installation Guide (DN-7060)

RedRapid X WIRELESS MODEM ROUTER. Quick Installation Guide (DN-7060) RedRapid X WIRELESS MODEM ROUTER Quick Installation Guide (DN-7060) 1. Product Introduction Congratulations on purchasing this Wireless N ADSL2/2+ Router. This router is a cost-effective ADSL2+ router,

More information

BROADBAND INTERNET ROUTER USER S MANUAL. Version 1.0. - Page 1 of 13 -

BROADBAND INTERNET ROUTER USER S MANUAL. Version 1.0. - Page 1 of 13 - Version 1.0 - Page 1 of 13 - 10/100M Broadband Router GETTING TO KNOW 2 3 4 1 5 7 6 - Page 2 of 13 - LED Indicator S/N Indicator Function 1 Power LED (Green) LED lights up steadily indicate that the power

More information

Quick Start Guide. WRV210 Wireless-G VPN Router with RangeBooster. Cisco Small Business

Quick Start Guide. WRV210 Wireless-G VPN Router with RangeBooster. Cisco Small Business Quick Start Guide Cisco Small Business WRV210 Wireless-G VPN Router with RangeBooster Package Contents WRV210 Router Ethernet Cable Power Adapter Product CD-ROM Quick Start Guide Welcome Thank you for

More information

Quick Start Guide. RV0xx Series Routers

Quick Start Guide. RV0xx Series Routers Quick Start Guide RV0xx Series Routers RV042 Dual WAN VPN Router RV042G Gigabit Dual WAN VPN Router RV082 Dual WAN VPN Router RV016 Multi-WAN VPN Router Package Contents VPN Router Power Adapter (Cisco

More information

Broadband ADSL2+ Modem Model DM111Pv2 Setup Manual

Broadband ADSL2+ Modem Model DM111Pv2 Setup Manual Broadband ADSL2+ Modem Model DM111Pv2 Setup Manual NETGEAR, Inc. 350 East Plumeria Drive San Jose, CA 95134 USA October 2014 208-10256-02 v1.0 Support Thank you for selecting NETGEAR products. After installing

More information

DSL-G604T Install Guides

DSL-G604T Install Guides Internet connection with NAT...2 Internet connection with No NAT, IP Un-number...6 Port Forwarding...12 Filtering & Firewall Setup...20 Access Control... 21 DMZ Setup... 26 Allow Incoming Ping... 27 How

More information

1 Getting Started. Before you can connect to a network

1 Getting Started. Before you can connect to a network 1 Getting Started This chapter contains the information you need to install either the Apple Remote Access Client or Apple Remote Access Personal Server version of Apple Remote Access 3.0. Use Apple Remote

More information

Router Setup Manual. NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 208-10060-01 2006-03-17

Router Setup Manual. NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 208-10060-01 2006-03-17 NETGEAR, Inc. 4500 Great America Parkway Santa Clara, CA 95054 USA 208-10060-01 2006-03-17 2006 by NETGEAR, Inc. All rights reserved. Trademarks NETGEAR is a trademark of Netgear, Inc. Microsoft, Windows,

More information

Frontier DSL SelfConnect Guide

Frontier DSL SelfConnect Guide Frontier DSL SelfConnect Guide Frontier DSL Self-Installation Guide Table of Contents Getting Started...2 Customer and Computer Requirements...3 Installation Options...4 Installing Frontier DSL Service...5

More information

Quick Installation Guide DAP-1360. Wireless N 300 Access Point & Router

Quick Installation Guide DAP-1360. Wireless N 300 Access Point & Router DAP-1360 Wireless N 300 Access Point & Router BEFORE YOU BEGIN Delivery Package Access point DAP-1360 Power adapter DC 12V Ethernet cable (CAT 5E) (brochure). If any of the items are missing, please contact

More information

Network User's Guide for HL-2070N

Network User's Guide for HL-2070N f Multi-Protocol On-board Print Server Network User's Guide for HL-2070N Please read this manual thoroughly before using the printer. You can print or view this manual from the Printer CD-ROM at any time,

More information

NETCOMM GATEWAY TM SERIES ADSL2+ Modem Routers

NETCOMM GATEWAY TM SERIES ADSL2+ Modem Routers NETCOMM GATEWAY TM SERIES ADSL2+ Modem Routers USER GUIDE Table of Contents Preface... 4 NB6 Series Package Contents... 5 Before You Use... 7 Subscription for ADSL Service... 7 Chapter 1: Overview... 9

More information

Aolynk DR814Q ADSL2+ Broadband Router Quick Start

Aolynk DR814Q ADSL2+ Broadband Router Quick Start Aolynk DR814Q ADSL2+ Broadband Router 1 Packing List Quick Start Unpack the shipping carton carefully and check the following items listed below: One Aolynk DR814Q ADSL2+ Broadband Router One power adapter

More information

Software Installation Guide

Software Installation Guide Software Installation Guide This manual explains how to install the software over a USB or network connection. Network connection is not available for models SP 200/200S/203S/203SF/204SF. Flowchart The

More information

Chapter 6 Using Network Monitoring Tools

Chapter 6 Using Network Monitoring Tools Chapter 6 Using Network Monitoring Tools This chapter describes how to use the maintenance features of your Wireless-G Router Model WGR614v9. You can access these features by selecting the items under

More information

User Manual. Page 2 of 38

User Manual. Page 2 of 38 DSL1215FUN(L) Page 2 of 38 Contents About the Device...4 Minimum System Requirements...5 Package Contents...5 Device Overview...6 Front Panel...6 Side Panel...6 Back Panel...7 Hardware Setup Diagram...8

More information