Environmental Graphics dimming system Monitoring software instruction. Environmental Graphics dimming system Monitoring software

Transcription

1 Environmental Graphics dimming system Monitoring software i. Brief introduction: Graphic monitoring software is a software that special for environmental dimming series products, offering the monitor functions for dimming series products, such like: SB-DN-D0610, SB-DN- D1210, SB-DN-D0620, SB-DN-D0602, SB-DN-D0403, SB-DN-R0816, ETC. Graphic monitoring software can achieve unlimited points monitoring, database management, safe and reliable. It makes the lighting management become more convenient, you can control all the lightings at your office PC at any moment. Remarks:Unlimited points (Per channel can be counted as one point) ii. Functions: 1. Graphical editing and control, easy operation. 2. User-defined,the background can be set to your favorite images. 3. Timer function, Device timing control, performance function. 4. Scene button. Can monitoring and controlling the command target and additional targets. 5. Statistical functions, can record the target channel on or off time. 6. Monitoring function can always monitor all online devices, easy management. 7. Current checking. Viewing the current situation for channel with feedback function. 8. Backup and restore database function. 9. Super link function. Just one super link button you can achieve from one room to another. iii. Log in setting: There are 3 types of default login: Administrator, senior user, user. 1. Type:Administrator As a administrator, you can set, edit and monitor+++, you can apply for user, change password and modify permissions+++ by enter menu bar option user management Username: admin Password: admin 2. Type:Senior User Senior user has the monitoring and controlling functions, but can not editing. Username: hdl Password: hdl 3. Type:User Monitoring function Username:user Password:user Different user has differ privileges,such like the administrator have to change back to user status after modify the setting, in case other user could edit the setting, to change the log in by menu bar option switch user. iv. Interface introduction: Log on the software and enter correct user name and password, below interface will be seen: Targets Menu Bar Heading icon Background Pic Hide bar control cue setting 1. Setting heading and background picture: Enter Menu bar option Start the background defined to set heading and background picture 2. Monitoring target setting: See above picture, right click the targets, adding or deleting the target floors, also can add sub-node floor to each target floor, and add rooms to floor. Edit background picture for each building, floor or rooms. For convenient operation,there is a all on/off function for each building, each floor and each room. 1

2 3. TOOLTIPS setting: TOOLTIPS : to set whether you need tip. Tip request:confirm the reminding message. No need tip:implement the command directly. v. Target editing status: Select the target room,like below picture: select Room 2th,edit the whole house devices by enter edit icon 1. Add background picture: Right click the mouse, then select and add background picture you like 2. Add equipment lamp: Right click mouse and select add fodder, like above picture Lamp1, area A. Right click the lamp icon to set the parameter. New added lamp (control target) From editing status to monitoring status Setting the refresh time for monitor targets Copy and delete the target lamp. Target device space and position adjustment. Modify lamp picture Modify lamp remark color and picture size Target lamp property setting 3. Set Lamp shape: After add new lamp,right click change picture,option for lamp changing like below picture. 4. Lamp remark setting: After add new lamp,right click Modify lamp remark color and picture size, font, color, position and picture size can be modified. Lamp remarks can be modify at lamp property setting 2

3 5. Lamp properties setting: After add new lamp,right click lamp property editing,like following picture: Lamp remark editable, device parameter setting,add multiple target setting. 6. Hyperlink button setting: From one building monitor to room monitor or from one room to another room, just need to set a hyperlink to realize a fast link For example, Hyperlink button from Room 2nd to Building 1 st. Right click Room 2nd, select add super link button,there will be a link button n (n is number) at the top left corner of room picture,right click and set button property. Button font setting Right click button font setting. Button property setting Right click modify button link property,modify button remarks, and key in the room which you want to go, such as Building 1st. After setting, you can jump from room 2nd to Building 1 st vi. Monitoring status function: Enter monitoring at the menu bar, some function icon in the menu bar and icon menu are in grey background, it means they cannot be used under monitoring status. Click the lamp icon to change the lamp status under monitoring function. All on/off button can be used either. Scene button: there are 24 scene buttons in each room; different scenes can be controlled by the button after set vii. Scene button setting There are 24 buttons used for different scene setting. For example, select Building 1st Floor 1st Room 2nd,define the room button, enter Scene button at the icon menu like following picture: Like above picture, select button 1, select channel and set scene in Room Channel Enable control marks to add scene into the button, beside, other device can be added to the same button by additional control. viii. Timer Selected inside menu bar to enter Timer Timer setting. Timer have timing and show function. Through "controlled group, controlled team, mode, holidays, rest days, working days, mode switching", etc.7 settings to achieve the timer functions and performance features. Holiday have the highest priority. Timer implemented by mode,controlled group transferred by mode,controlled team transferred by controlled group, controlled team is the fundemental unit,additional picture shows the relationship between these 7 functions. After setting, click timer start. 3

4 1. Controlled Group define setting Unlimited increase in the controlled group, each controlled group call unlimited of group members. Controlled Group operation: Button add controlled group,can set unlimited group, able for remarks. Button delete selected controlled group. Button delete all controlled group. Button Save setting. Current controlled member information: First choose the controlled group, then set member. Button add member. Button delete member. Button delete all members. Button save all settings. Button add other room setting to current controlled group, Button detect whether the controlled group has been set successfully. Button On the synchronization settings, it is recommended to select the big packet for performance, and small packet for timing. Button this button is for Re-load the new data to change old one Button Turn on/off the timer If mark "Synchronization modification button, all team members can be synchronized modified. 2. Controlled Covey define setting: 4

5 Controlled Covey its calling objectives are Controlled Group, Controlled Covey can be added randomly,its setting is the same as Controlled Group. Select Covey number, input remarks, choose control type, then save. Select controlled group member information from Controlled Group or team list. 3. Mode define setting: Mode its calling objects are Controlled Covey, its setting is the same as the Controlled Group. 4. Holiday setting: Holiday, Rest day, working day have the same settings, select date and mode. 5. Mode switching setting: That is switching between timing and Show functions. For example, in some special occasion, original settings can not fulfil the requirements, The modification can be set on the switching date. Other setiing will be not modified ix. Status report Status report able to the status of one room its channel current, loading, runing time. Select target room, click from status bar status report Channel status monitor setting,reports generate after selected. Check information after setting. Then click Status report Channel status information monitoring, 5

6 x. GPRS group control function xi. This software is able to Work with SMS module. View function Slected from Menu select View Online device information for current device detection, including device remark, IP address. View function available only under monitor state. xii. View User registration record can view all user register time and mode. Interface Skin setting xiii. Slected from Menu View Skin, select software interface color. Backup function Selected from Menu View Backup, to setup data backup and restore. 6