2 1 SAFETY Types of safety precautions: Safety precautions: Welcome Display icons and segments Using buttons Getting started Using backlight and button lock Testing your rest HR Putting on HR belt Starting training session Troubleshooting: No HR signal During training During guided training After training After training Recovery time Reviewing recovery time and previous Move Previous Move Adjusting settings Time and personal settings Training settings General settings Pairing Estimating your activity class
3 10.2 Sleep mode and initial settings Changing language Customizing Suunto Quest Connecting to web Customizing displays in Movescount Training with custom training program Activating training program Taking program into use Training guidance Making laps during training Pairing POD/HR belt Example: Pairing Suunto Dual Comfort Belt Troubleshooting Calibrating PODs Care and maintenance Replacing battery Replacing HR belt battery Specifications Technical specifications Trademark FCC compliance CE ICES Copyright Patent notice en 3
4 16 Warranty Warranty Period Exclusions and Limitations Access to Suunto warranty service Limitation of Liability
5 1 SAFETY en Types of safety precautions: WARNING: - is used in connection with a procedure or situation that may result in serious injury or death. CAUTION: - is used in connection with a procedure or situation that will result in damage to the product. NOTE: - is used to emphasize important information. Safety precautions: WARNING: ALLERGIC REACTIONS OR SKIN IRRITATIONS MAY OCCUR WHEN PRODUCT IS IN CONTACT WITH SKIN, EVEN THOUGH OUR PRODUCTS COMPLY WITH INDUSTRY STANDARDS. IN SUCH EVENT, STOP USE IMMEDIATELY AND CONSULT A DOCTOR. WARNING: ALWAYS CONSULT YOUR DOCTOR BEFORE BEGINNING AN EXERCISE PROGRAM. OVEREXERTION MAY CAUSE SERIOUS INJURY. CAUTION: DO NOT APPLY SOLVENT OF ANY KIND TO THE PRODUCT, AS IT MAY DAMAGE THE SURFACE. 5
6 CAUTION: DO NOT APPLY INSECT REPELLENT ON THE PRODUCT, AS IT MAY DAMAGE THE SURFACE. CAUTION: DO NOT THROW THE PRODUCT AWAY, BUT TREAT IT AS ELECTRONIC WASTE TO PRESERVE THE ENVIRONMENT. CAUTION: DO NOT KNOCK OR DROP THE DEVICE, AS IT MAY BE DAMAGED. 6
7 2 WELCOME Thank you for choosing Suunto Quest! This User Guide is here to help you get the most out of your training session with Suunto Quest. Read it through to make using your new Suunto Quest even more enjoyable. There s nothing like it. Being out amongst nature, doing the sport you love best. Constantly searching for the perfect trail. Training for your next big event. Enjoying every moment of it. It s what you live for. It s what you were built for. The robustly designed Suunto Quest lets you: en _PLAN _Create tailor-made training plans or choose from existing plans online. _PLUG _Download training program to Suunto Quest. _Upload training data to Movescount.com. _Customize display and settings at Movescount.com. _PLAY _Get heart rate and speed based information during training, and recovery time. _PROGRESS _Analyze your performance online and share your achievements with the community at Movescount.com. 7
8 Continue your training experience online and get even more out of every move at Movescount.com. With Suunto Movestick you can connect your Suunto Quest to Movescount.com, upload training logs, share your progress with friends, and exchange emotions and thoughts. You can also download a training program straight to your Suunto Quest. Check out Movescount.com today and sign up. NOTE: Be sure to register your device at to get the full range of Suunto support. 8
9 3 DISPLAY ICONS AND SEGMENTS en 9
10 4 USING BUTTONS By pressing the following buttons, you can access various features: START STOP: select custom mode 1 (training), custom mode 2 (running), custom mode 3 (cycling), recovery time, prev. Move, web connect start/stop a training session increase a value/move up Read more about the custom modes in Section 11.2 Customizing displays in Movescount on page 35. NEXT: switch views keep pressed to enter/exit settings accept/move to the next step LIGHT LOCK: activate the backlight 10
11 keep pressed to lock the START STOP button decrease a value/move down en 11
12 5 GETTING STARTED Start by adjusting your personal settings. Many of the calculations use these settings, so it is important that you are as accurate as possible when defining the values. Through the personal settings, you tune your Suunto Quest according to your physical traits and activity. To set the initial settings: 1. Press any button to activate the device. Wait until the unit wakes up and says hold 2 sec. Keep START STOP pressed to enter the first setting. 2. Press START STOP or LIGHT LOCK to change values. 3. Press NEXT to accept a value and to move to the next setting. Press LIGHT LOCK to return to the previous setting. 4. When you are ready, select yes (START STOP) to confirm all settings. If you want to modify the settings, select no (LIGHT LOCK). You can set the following initial settings: language: English, Deutsch, français, español, português, italiano, Nederlands, svenska, suomi units: metric / imperial time: 12 / 24 h, hours and minutes 12
13 date personal settings: year of birth, sex, weight en NOTE: Once you have entered your year of birth, your device automatically sets the maximum heart rate (max. HR) using the formula 207 (0.7 x AGE) published by the American College of Sports Medicine. If you know your real max. HR, you should adjust the automatically given value to the known value. Remember to adjust additional personal values in personal settings before you start training with Suunto Quest, see Chapter 10 Adjusting settings on page 27. TIP: In the time view, press the NEXT button to see the date, dual time, and seconds with the time. If you choose the seconds view, the display returns to show only date or dual time after 2 minutes to save battery life. 5.1 Using backlight and button lock Press LIGHT LOCK to activate the backlight. Keep LIGHT LOCK pressed to lock or unlock the START STOP button. When the START STOP button is locked, is shown on the display. NOTE: Lock the START STOP button to avoid accidentally starting or stopping your stopwatch. When the START STOP button is locked during a training session, you can still change the views by pressing the NEXT button. 13
14 NOTE: During training, keep the NEXT button pressed to activate the button lock and deactivate the tapping feature. NOTE: To save the battery life, the backlight blinks when activated during training. 5.2 Testing your rest HR Rest HR is your heart rate at rest. Improving your fitness level usually lowers the rest HR. To test your rest HR: 1. Moisten the contact areas and put on the HR belt. 2. Make sure your device receives the HR signal. 3. Lie down and relax for three minutes. 4. Check your heart rate from the device and adjust it accordingly in the personal settings. TIP: The best time to perform the rest HR test is after a good night's sleep. If you just had coffee, feel tired or stressed, do the test later. 14
15 6 PUTTING ON HR BELT en NOTE: Suunto Quest is compatible only with Suunto Dual Comfort Belt. Adjust the strap length so that the HR belt is tight but still comfortable. Moisten the contact areas with water or gel and put on the HR belt. Ensure the HR belt is centered on your chest and the red arrow is pointing up WARNING: People who have a pacemaker, defibrillator, or other implanted electronic device use the HR belt at their own risk. Before starting the initial use of the HR belt, we recommend an exercise test under a doctor s supervision. This ensures the safety and reliability of the pacemaker and HR belt when being used simultaneously. Exercise may include some risk, especially for those who have been inactive. We strongly advise you to consult your doctor prior to beginning a regular exercise program. NOTE: HR belts with ANT icon ( ) are compatible with ANT compatible Suunto wristop computers and with Suunto ANT Fitness Solution, while HR belts with IND icon ( ) are compatible with most exercise equipment with inductive heart rate reception. Your Suunto Dual Comfort Belt is both IND and ANT compatible. 15
16 NOTE: Suunto Quest cannot receive the HR belt signal under water. TIP: Machine-wash the heart rate belt regularly after use to avoid unpleasant odor. 16
17 7 STARTING TRAINING SESSION After the initial settings, you can start training. You can get full advantage of Suunto Quest by customizing it to best suit your needs. For information about settings, displays, and training customization options, see Chapter 10 Adjusting settings on page 27 and Section 11.2 Customizing displays in Movescount on page 35. This section describes how to start a training session using Suunto Quest default settings. To start training: 1. Moisten the contact areas and put on the HR belt. 2. In the time view, press START STOP and select one of the following: training, running, or cycling. 3. Press NEXT to confirm. If the training program is activated and a training session is scheduled for the current day, you will see a recommendation screen showing HR or speed range before the training session begins. In this case, press NEXT to move to the next screen. 4. As soon as Suunto Quest finds the HR belt or POD, you will see a notification screen. Press START STOP to start recording your training session. en 17
18 TIP: Warm up before and cool down after training. 7.1 Troubleshooting: No HR signal If you lose the HR signal, try the following: Check that you are wearing the HR belt correctly. Check that the electrode areas of the HR belt are moist. Replace the battery of the HR belt and/or the device, if problems persist. NOTE: Suunto Quest cannot receive the HR belt signal under water. 18
19 8 DURING TRAINING Suunto Quest gives you additional information during training. You can define what information you want to see on the display. For information about settings, displays, and training customization options, see Chapter 10 Adjusting settings on page 27 and Section 11.2 Customizing displays in Movescount on page 35. This section describes how to scroll through additional information during a training session using Suunto Quest default settings. Here are some ideas on how to use the device during training: Press NEXT to see additional information in real time. Keep LIGHT LOCK pressed to lock the START STOP button to avoid accidentally stopping your stopwatch. Press START STOP to pause the training session. The additional information varies depending on what information is available and also on your personal choice and preference. As a default, if both HR and POD are available, the following information is displayed: en In the default training custom mode: view 1: heart rate and stopwatch view 2: heart rate and calories in real time view 3: heart rate percentage and heart rate zone 19
20 view 4: stopwatch view 5: speed and distance in real time In the default running custom mode: view 1: heart rate and stopwatch view 2: pace and distance view 3: pace and average running cadence view 4: distance and time view 5: stopwatch In default cycling custom mode: view 1: heart rate and stopwatch view 2: heart rate and distance view 3: speed and distance view 4: speed and stopwatch view 5: distance and average speed In addition, during training you will see arrows on the outer rim of the display. The arrows represent your current recovery time (in hours). The recovery time is the time you need to fully recover from the training to be ready for the next training session. The numbers on the rim show how many hours your recovery time is so far. Recovery time will also be visible in one of the summary views after training and as a seperate item in the training menu. 20
21 NOTE: To save battery life, the backlight will blink when activated during training. en TIP: Switch the sounds on or off ( ) during exercise by keeping NEXT pressed. You cannot switch the sounds on, if you have set sounds to all off in the general settings, see Chapter 10 Adjusting settings on page During guided training You can create your own training program at and download the program to your Suunto Quest. When the training program is on, Suunto Quest guides you to reach your daily training target. When the arrow on the display is pointing up, you should increase the intensity or speed. When the arrow is pointing down, you should decrease the intensity or speed. NOTE: When planning a training session in Movescount, you can define its duration, intensity, and distance. Unless distance is defined, Suunto Quest will give you intensity guidance. 21
22 NOTE: You can set the outer rim arrows to represent the percentage of training completion in Movescount. You can read the percentage value using the digits on the rim of the device. NOTE: During training the guiding arrow is only visible in the displays showing speed or HR data. When you have reached your target, is shown. If you do not want to follow a training program, make sure to turn it off in the training settings. When the training program is disabled, you can still receive guidance related to personally set heart rate or speed limits. Remember to enable the heart rate or speed limits by selecting limits on in the training settings. 22
23 9 AFTER TRAINING en 9.1 After training 1. Press START STOP to pause or stop the training session. 2. Select stop to confirm stopping and to view the summary, or select continue to continue training. 3. Press NEXT to browse through the different views of the summary. 4. Keep NEXT pressed to return to the time view. NOTE: If your peak HR during training has exceeded your maximum HR set in the device settings, the device automatically asks if you want to update your maximum HR. TIP: You can skip the summary by keeping NEXT pressed in the first summary view. To view the previous training summary later, press START STOP in the time view and select prev. Move. 23
24 TIP: Machine-wash the heart rate belt regularly after use to avoid unpleasant odor. 9.2 Recovery time After each training session, Suunto Quest shows how long it takes for you to fully recover and when you are ready to train with full intensity within your personal activity class. Check your recovery time at any time in recovery time, see Section 9.3 Reviewing recovery time and previous Move on page 25. If the recovery time is more than 24 hours, we recommend you to have a rest day to avoid overtraining. Suunto Quest calculates up to 120 hours of recovery time. NOTE: Consult a professional trainer to learn more about how to utilize recovery times (exercise and rest ratio) to reach your targets. NOTE: The arrows appearing on the outer rim of the display during training represent your recovery time. The arrows are shown during and after training in the time view. 24
25 NOTE: The recovery time is calculated based on HR information and it is only available when you are training with an HR belt. en 9.3 Reviewing recovery time and previous Move To review recovery time and previous Move: 1. In the time view, press START STOP. 2. Select recovery time or prev. Move with START STOP or LIGHT LOCK. 3. Confirm your selection with NEXT. 4. Press NEXT to browse through the views. After you have browsed through all the views, the device returns to the time view. TIP: Keep NEXT pressed to return to the time view. The arrows appearing on the outer rim of the display during training represent your recovery time. The arrows are shown during and after training in the time view. In the time view the arrows gradually disappear, as you recover. 9.4 Previous Move In prev. Move you can view the information of your previous training session. 25
26 You can only view the details of your previous training session from the device. However, Suunto Quest stores training details from previous sessions, which you can view in more detail when you transfer the logs to Movescount.com. NOTE: Remember to transfer your training logs to Movescount.com regularly to avoid overwriting log memory. 26
27 10 ADJUSTING SETTINGS You can adjust the settings in the time view. During training, you can: set the sounds on or off by keeping NEXT pressed. lock the START STOP button and the tapping feature by keeping the LIGHT LOCK button pressed. To adjust the settings: 1. In the time view, keep NEXT pressed to enter the settings. 2. Press NEXT to enter the first setting. You can browse through the setting steps with START STOP and LIGHT LOCK. 3. Press START STOP or LIGHT LOCK to change the values. Press NEXT to confirm and to move to the next setting. 4. When you are ready, select yes (START STOP) to confirm all settings. If you still want to modify the settings, select no (LIGHT LOCK) to return to the first setting. en You can adjust the following settings: Time and personal settings time: hours and minutes 27
28 alarm: on/off, hours, minutes dual time: hours and minutes date: year, month, weekday personal settings: weight, activity class, maximum HR (max. HR), rest HR Training settings program: on/off - allows you to use a default Suunto Quest program or a personal training program downloaded from Movescount.com. limits: off, HR, speed - allows you to select heart rate limit or speed limit guidance, if you are not using a training program. autolap: on/off timer 1: off/on, minutes, seconds timer 2: off/on, minutes, seconds TIP: You can adjust the personal values for the HR and speed limits in Movescount. In Movescount you can also define limits per custom mode. TIP: Autolap is triggered by distance. The default values per POD are 1 (km/mile) for Foot POD Mini and 1 (km/mile) per Bike POD. You can adjust the values for each POD and custom mode you are using in Movescount.com. General settings sounds: all on: all sounds are on buttons off: you will hear all other sounds, except button presses all off: all sounds are off (when the sounds are off, is shown on the display during training) 28
29 tap sensitivity: off, very low, low, medium, high, very high distance unit (with optional speed and distance POD): km/mi en Pairing skip: skip pairing belt: pair HR belt Foot POD: pair a Foot POD or Foot POD Mini Bike POD: pair a Bike POD Speed POD: pair a POD - we recommend you pair Suunto GPS POD under this name Estimating your activity class The activity class is a rating of your current activity level. Use the following classifications to help you determine your activity class. Easy going If you do not participate regularly in recreational sports or heavy physical activity, use 1. Recreational If you participate regularly in recreational sports or do physical work and your weekly exercise is: less than 1 hour, use 2. more than 1 hour, use 3. 29
30 Fitness If you participate regularly in sports or other physical activity and you engage weekly in heavy exercise: under 30 minutes, use minutes, use hours, use 6. over 3 hours, use 7. Endurance or professional If you train on a regular basis or participate in competitive sports and your weekly exercise is: 5-7 hours, use hours, use hours, use hours, use hours, use 9.5. over 15 hours, use Sleep mode and initial settings NOTE: It is recommended to change the initial settings in Movescount.com. To change the initial settings without access to Movescount.com, you have to put the device into sleep mode. 30
31 To put the device into sleep mode: 1. After the last step of general settings, when the device asks you to confirm that the setting changes are done, keep NEXT pressed until the device goes into sleep mode. 2. Press any button to activate the device again. 3. Set the initial settings, see Chapter 5 Getting started on page 12. en NOTE: When replacing the battery, only the time and date change. The device remembers your previous initial settings and recorded exercises. Example: adjusting alarm settings When the alarm is on, is shown on the display. To set the alarm on/off: 1. In the time view, keep NEXT pressed to enter the settings. 2. Browse to alarm with START STOP and confirm with NEXT. 3. Set the alarm on or off with START STOP and LIGHT LOCK. Confirm with NEXT. 4. Set the alarm time with START STOP and LIGHT LOCK. Confirm with NEXT. When the alarm sounds, press stop (LIGHT LOCK) to turn it off. After you have stopped the alarm, it sounds the same time the following day. 31
32 10.3 Changing language If you want to change the device's language or you have chosen the wrong language when setting up the device, the device needs to be put to sleep. For information on how to put the device to sleep, see Section 10.2 Sleep mode and initial settings on page 30. Alternatively, you can adjust the language in Movescount.com NOTE: The device remembers your previous initial settings and recorded training sessions. 32
33 11 CUSTOMIZING SUUNTO QUEST en 11.1 Connecting to web Movescount.com is an online sports community that offers you a rich set of tools to manage your daily activities and create engaging stories about your experiences. It also allows you to customize your Suunto Quest to best meet your training needs. Transfer your recorded logs with Suunto Movestick Mini to Movescount.com. Download settings and customized plans from Movescount.com to your Suunto Quest. CAUTION: Do not plug in Movestick Mini before installing Moveslink! To install Moveslink: 1. Go to 2. Download, install, and activate Moveslink. M MAC PC M NOTE: A Moveslink icon is visible on your computer's display when Moveslink is active. 33
34 NOTE: Moveslink is compatible with PC (Windows XP, Windows Vista, Windows 7) and MAC (Intel-based, running OS X version 10.5 or later). To register to Movescount: 1. Go to 2. Create your account. Movescount. com + To transfer data: 1. Plug Suunto Movestick Mini into your computer's USB port. 2. Make sure that Moveslink is activated. 3. In Suunto Quest, press START STOP to enter the training menu, scroll to web connect, and confirm by pressing NEXT. 4. Follow the instructions shown on your computer to view your moves in Movescount. MAC PC M 34
35 TIP: Suunto Quest can store between 20 and 30 logs, depending on the data you want to record during training. After that it starts to overwrite the oldest log. To avoid losing training logs and to view the log details, transfer them to Movescount.com. en NOTE: The first time Suunto Quest is connected to Movescount.com, all information (including the device settings) is transferred from Suunto Quest to Movescount. The next time you connect Suunto Quest to Movescount.com, changes in settings, training programs, displays, and custom modes you made in Movescount.com and in the device will be synchronized Customizing displays in Movescount Suunto Quest lets you choose the information you want to see on the display during training. Take full advantage of Suunto Quest by customizing the displays and creating your own training program in Movescount.com You can customize three different areas on the display: The outer rim arrows can be customized to show the recovery time in hours, heart rate percentage, or percentage of training completion. When showing the completion and recovery time, the outer rim arrows are visible during 35
36 training and after training in the time mode. When showing the heart rate percentage, the outer rim arrows are only visible during training. Use the digits on the rim of the device to interpret outer rim arrows. The digits represent hours (for recovery time) or percentage (for heart rate % and for training completion). Row 1 displays training information in the middle of the screen. Row 2 displays training information at the bottom of the screen. NOTE: Remember to connect Suunto Quest to your Movescount.com account every time you transfer your training data, or would like to transfer changes made in Suunto Quest settings to the device. NOTE: Recovery time and heart rate percentage will only be displayed when training with a heart rate belt. Training completion will only be shown if you take a training program into use. NOTE: Some information, for example the interval timer, lap time, and heart rate zone can only be shown in row 2. You can create up to 5 custom modes to your Suunto Quest, name them, and define up to 5 views for each mode. You can also define whether Suunto Quest should connect to a heart rate belt or POD, as well as the autolap distance per POD. TIP: By selecting the stopwatch to row 2 and leaving row 1 empty, the stopwatch will be displayed in large digits on the display. 36
37 12 TRAINING WITH CUSTOM TRAINING PROGRAM en You can create your own training program in Movescount.com and download the program to your Suunto Quest. When the training program is on, Suunto Quest guides you to reach your daily training target. This section describes how to take the default program into use. Remember that the default program is only an example and may not fully meet your training needs Activating training program To activate the default training program: 1. Keep NEXT pressed to enter the settings. 2. Scroll to training settings with START STOP and confirm with NEXT. 3. Select program on and confirm with NEXT. 4. Keep NEXT pressed to exit the settings and return to the time view. 37
38 12.2 Taking program into use Suunto Quest default training program lasts 15 weeks, with training sessions varying in duration and intensity. The program is designed for activity class 6 (1-3 hours of heavy exercise weekly). Suunto Quest default program offers you intensity guidance during your training. To create your own training program, visit Movescount.com. NOTE: Remember to connect Suunto Quest to your Movescount.com account every time you transfer your training data, or would like to transfer changes made in Suunto Quest settings to the device. When the training program is on, Suunto Quest shows you a training day reminder in the time view for the day with the scheduled training session. Press NEXT to see the daily target recommendation. Press NEXT again to confirm and to return to the time view Training guidance When the training program is on, Suunto Quest shows your progress and guides you to reach your daily training target. Depending on the type of training selected, Suunto Quest provides intensity (heart rate based) or speed (distance based) guidance. In the default program only intensity guidance is shown. When the arrow on the display close to heart rate or speed value is pointing up, you should increase the intensity or speed. When the arrow is pointing down, you should decrease the intensity or speed. When you have reached your target, is shown. 38
39 NOTE: The guiding arrow during training is only visible in the displays showing speed or HR data. en NOTE: Unless distance is defined, Suunto Quest will give you intensity guidance. If you train without a heart rate belt, you will not receive intensity guidance during your training session. NOTE: If you do not want to follow a training program, make sure to turn it off in the general settings and in Movescount. TIP: If the training program is disabled, you can still receive guidance related to personally set heart rate or speed limits. Remember to turn the limits on in the device settings. You can adjust the limits in Movescount. NOTE: Suunto Quest creates a daily target. If you plan several training sessions per day, their durations and intensities are combined into a daily target Making laps during training You can set Suunto Quest to take autolaps when training. Autolaps are driven by distance. You can select different autolap distances for each POD and custom mode. TIP: You can use three custom modes in Suunto Quest: running, walking, and cycling. In Movescount.com you can set your Suunto Quest to take autolaps 39
40 every 1 km (mile) for running, every 0.5 km (mile) for walking, and every 10 km (miles) for cycling. You can also take manual laps during training. When training, tap on the display to take a lap. You can adjust the tapping sensitivity in the general settings: 1. In the time mode, keep NEXT pressed to enter the settings. 2. Scroll to general settings with START STOP and confirm with NEXT. 3. Press NEXT to enter the tap sensitivity settings. 4. Press START STOP to adjust the tap sensitivity to the desired level you can tap the display when scrolling through the levels to check the sensitivity level. When a tap is registered, tapped! message will be displayed. 5. Press NEXT to confirm the setting. 6. Keep NEXT pressed to exit the settings and return to the time mode. TIP: Laps will be automatically created when using interval timers and when a training session is paused or stopped. 40
41 13 PAIRING POD/HR BELT Pair Suunto Quest with optional Suunto PODs (Suunto Foot POD Mini, GPS POD, or Bike POD) to receive additional speed and distance information during training. Suunto Quest is compatible with Suunto Dual Comfort Belt. The HR belt and/or POD included in your Suunto Quest package are already paired. Pairing is required only if you want to use a new HR belt or a speed POD with the device. You can pair up to three Suunto speed and distance PODs. If you pair more than three PODs, only the latest three will be paired. To pair a POD or an HR belt: 1. In the time view, keep NEXT pressed to enter the settings. 2. Scroll up by pressing START STOP to reach the pairing options and press NEXT to enter the pairing menu. 3. Select POD or belt with START STOP and LIGHT LOCK. Confirm with NEXT. 4. Turn on your POD or HR belt (see the instructions below). See the POD manual for more information. Wait for the message paired. 5. If the pairing fails, press NEXT to return to the pairing setting. en 41
42 Example: Pairing Suunto Dual Comfort Belt 1. Remove the HR belt battery. 2. Reset the HR belt by inserting the battery positive side down. 3. In your Suunto Quest, follow the steps 1-3 from the instructions above. 4. Re-insert the belt battery positive side up and close the belt cover. Wait for the message paired. 5. If the pairing fails, press NEXT to return to the pairing setting. NOTE: When turn on POD or turn on belt text is shown on the display, Suunto Quest waits for the pairing signal from the HR belt or POD for 15 seconds, during which the corresponding HR belt or POD should be turned on Troubleshooting If HR belt pairing fails, try the following: 1. Remove the battery from the belt. 2. Re-insert the battery upside down to reset the HR belt and remove the battery again. 3. Scroll to the device's pairing option. 4. Insert the battery in the HR belt the right side up Calibrating PODs You can calibrate Suunto Foot POD Mini or Suunto Bike POD with Suunto Quest for accurate speed and distance measurement. Perform the calibration on an accurately measured distance, for instance, on a 400 m running track. 42
43 To calibrate Suunto Foot POD Mini with Suunto Quest: 1. Attach Suunto Foot POD Mini to your shoe. For more information, see Suunto Foot POD Mini Quick Guide. 2. Choose a custom mode to connect Suunto Quest with Suunto Foot POD Mini. 3. Start running at your usual pace. When you cross the starting line, press START STOP to start the recording. 4. Run a distance of m (about miles) at your usual pace (for example two laps on a 400 m track). 5. Press START STOP when you reach the finish line. 6. Scroll with NEXT through summary views, until you reach the distance summary. Adjust the distance shown on the display to the actual distance you ran with START STOP and LIGHT LOCK. Confirm with NEXT. 7. Confirm the POD calibration by pressing START STOP. Your Foot POD Mini has now been calibrated. You can also calibrate your Suunto Bike POD in a similar way. en 43
44 14 CARE AND MAINTENANCE Handle the unit with care do not knock or drop it. Under normal circumstances the device will not require servicing. After use, rinse it with fresh water, mild soap, and carefully clean the housing with a moist soft cloth or chamois. Do not try to repair the unit yourself. Contact an authorized Suunto service, distributor or retailer for any repair. Use only original Suunto accessories - damage caused by non-original accessories is not covered by warranty. NOTE: Never push the buttons while swimming or in contact with water. Pressing the buttons while the unit is submerged could cause the unit to malfunction Replacing battery If is displayed, a battery replacement is recommended. Replace the battery with extreme care to ensure your Suunto Quest remains water resistant. Careless replacement may void the warranty. Replace the battery as illustrated here: 44
45 en NOTE: Carefully ensure that the plastic O ring is properly placed so that the wristop computer remains water-resistant. Careless battery replacement may void the warranty. NOTE: Be careful with the spring in the battery compartment (see illustration). If the spring is damaged, please send your device to an authorized Suunto representative for service. NOTE: When replacing the battery, only the time and date change. Previous initial settings and recorded exercises are restored. 45
46 14.2 Replacing HR belt battery Replace the battery as illustrated here: NOTE: Suunto recommends that the battery cover and the O ring are changed simultaneously with the battery to ensure that the HR belt remains clean and water resistant. Replacement covers are available with replacement batteries from your authorized Suunto dealer or web shop. 46
47 15 SPECIFICATIONS en 15.1 Technical specifications General Operating temperature: -10 C to +50 C / +14 F to +122 F Storage temperature: -30 C to +60 C / -22 F to +140 F Weight (device): 40 g / 1.41 oz Weight (HR belt): max. 55 g / 1.95 oz Water resistance (device): 30 m / 100 ft (ISO 2281) Water resistance (HR belt): 20 m / 66 ft (ISO 2281) Transmission frequency (belt): 5.3 khz inductive, gym equipment and GHz Suunto-ANT compatible Transmission range: ~ 2 m / 6 ft User-replaceable battery (device / HR belt): 3V CR2032 Battery life (device / HR belt): approximately 1 year in normal use (2.5 h / week exercise with HR and POD) Log recorder/stopwatch Maximum log time: 20 hours Resolution: 0.1 second accuracy Heart rate Display: 30 to 240 Rest HR: estimated at 60 bpm, adjustable from 30 to 100 bpm 47
48 Personal settings Birth year: Weight: kg or lb 15.2 Trademark Suunto Quest, its logos, and other Suunto brand trademarks and made names are registered or unregistered trademarks of Suunto Oy. All rights are reserved FCC compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Repairs should be made by authorized Suunto service personnel. Unauthorized repairs will void warranty. This product has been tested to comply with FCC standards and is intended for home or office use CE The CE mark is used to mark conformity with the European Union EMC directives 89/336/EEC and 99/5/EEC ICES This Class [B] digital apparatus complies with Canadian ICES
49 15.6 Copyright Copyright Suunto Oy All rights reserved. Suunto, Suunto product names, their logos and other Suunto brand trademarks and names are registered or unregistered trademarks of Suunto Oy. This document and its contents are proprietary to Suunto Oy and are intended solely for the use of clients to obtain knowledge and information regarding the operation of Suunto products. Its contents shall not be used or distributed for any other purpose and/or otherwise communicated, disclosed or reproduced without the prior written consent of Suunto Oy. While we have taken great care to ensure that information contained in this documentation is both comprehensive and accurate, no warranty of accuracy is expressed or implied. This document content is subject to change at any time without notice. The latest version of this documentation can be downloaded at en 15.7 Patent notice This product is protected by pending patent applications and their corresponding national rights: US 11/432,380, US 11/169,712, US 12/145,766, US 7,526,840, US 11/808,391, USD 603,521, USD 29/313,029. Additional patent applications have been filed. 49
50 16 WARRANTY SUUNTO LIMITED WARRANTY Suunto warrants that during the Warranty Period Suunto or a Suunto Authorized Service Center (hereinafter Service Center) will, at its sole discretion, remedy defects in materials or workmanship free of charge either by a) repairing, or b) replacing, or c) refunding, subject to the terms and conditions of this Limited Warranty. This Limited Warranty is only valid and enforceable in the country of purchase, unless local law stipulates otherwise. Warranty Period The Limited Warranty Period starts at the date of original retail purchase. The Warranty Period is two (2) years for display devices. The Warranty Period is one (1) year for accessories including but not limited to PODs and heart rate transmitters, as well as for all consumable parts. Exclusions and Limitations This Limited Warranty does not cover: 1. a) normal wear and tear, b) defects caused by rough handling, or c) defects or damage caused by misuse contrary to intended or recommended use; 2. user manuals or any third-party items; 3. defects or alleged defects caused by the use with any product, accessory, software and/or service not manufactured or supplied by Suunto; 4. replaceable batteries. This Limited Warranty is not enforceable if item: 1. has been opened beyond intended use; 50
51 2. has been repaired using unauthorized spare parts; modified or repaired by unauthorized Service Center; 3. serial number has been removed, altered or made illegible in any way, as determined at the sole discretion of Suunto; 4. has been exposed to chemicals including but not limited to mosquito repellents. Suunto does not warrant that the operation of the Product will be uninterrupted or error free, or that the Product will work with any hardware or software provided by a third party. en Access to Suunto warranty service You must have proof of purchase to access Suunto warranty service. For instructions how to obtain warranty service, visit contact your local authorized Suunto retailer, or call Suunto Help Desk (national or premium rates may apply). Limitation of Liability To the maximum extent permitted by applicable mandatory laws, this Limited Warranty is your sole and exclusive remedy and is in lieu of all other warranties, expressed or implied. Suunto shall not be liable for special, incidental, punitive or consequential damages, including but not limited to loss of anticipated benefits, loss of data, loss of use, cost of capital, cost of any substitute equipment or facilities, claims of third parties, damage to property resulting from the purchase or use of the item or arising from breach of the warranty, breach of contract, negligence, strict tort, or any legal or equitable theory, even if Suunto knew of the likelihood of such damages. Suunto shall not be liable for delay in rendering warranty service. 51
53 SUUNTO HELP DESK Global USA (toll free) Canada (toll free) Suunto Oy 9/2011 Suunto is a registered trademark of Suunto Oy. All Rights reserved.
SUUNTO M1/M2 USER GUIDE en 1 SAFETY........................................................................ 4 Types of safety precautions:.......................................... 4 Safety precautions:....................................................
SUUNTO M4 USER GUIDE en 1 SAFETY........................................................................ 5 Types of safety precautions:.......................................... 5 Safety precautions:....................................................
SUUNTO M5 USER GUIDE en 1 SAFETY........................................................................ 5 Types of safety precautions:.......................................... 5 Safety precautions:....................................................
SUUNTO M4 USER GUIDE en 1 Welcome...................................................................... 4 2 Display icons and segments................................................. 6 3 Using buttons................................................................
EN CUSTOMER SERVICE CONTACTS Global Help Desk +358 2 284 11 60 Suunto USA Phone +1 (800) 543-9124 Canada Phone +1 (800) 776-7770 Suunto website www.suunto.com COPYRIGHT This publication and its contents
en SUUNTO COMFORT BELT Heart Rate Transmitter Belts USER GUIDE 1 Introduction to Suunto Comfort Belt................................................. 3 2 Getting started with Suunto Comfort Belt............................................
EN TABLE OF CONTENTS 1. INTRODUCTION TO SUUNTO SMART BELT... 3 2. GETTING STARTED WITH SUUNTO SMART BELT... 3 3. DOWNLOADING AND ANALYZING DATA RECORDED WITH SUUNTO SMART BELT... 7 4. ERRORS AND WARNINGS...
en USER GUIDE 1 2 MODES & VIEWS Time Training Speed & Distance weekday date seconds dual time empty training effect calories average heart rate lap time time distance average speed maximum speed lap time
SUUNTO t3d USER GUIDE en MODES & VIEWS Time Training Speed & Distance weekday date seconds dual time empty training effect calories average heart rate lap time time distance average speed maximum speed
F O R E R U N N E R 6 1 0 q u i c k s t a r t m a n u a l Important Information warning Always consult your physician before you begin or modify any exercise program. See the Important Safety and Product
owner s manual F O R E R U N N E R 1 1 0 GPS-ENABLED SPORT WATCH 2010 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Tel. (913) 397.8200 or
INSTRUCTION MANUAL Heart Rate Monitor Model HR-100C ST/SP SET TIME MODE TABLE OF CONTENTS Before Using the Monitor Introduction...3 Components and Functions...4 Your Personal Data Maximum Heart Rate...5
COMPLETE USER GUIDE mioglobal.com TABLE OF CONTENTS Welcome 03 What s Included 03 Important Safety Information 04 Your Mio FUSE 04 Getting Started Using Mio FUSE 06 Mio FUSE Touchpoints 06 All-Day Mode
Heart Rate Watch USER MANUAL To Turn Your Watch On: 1. Remove the LCD display sticker on the watch face. 2. Hold any button for 3 seconds until the screen turns on. Introduction to Your Smarthealth Heart
SUUNTO CORE USER GUIDE en 1 SAFETY........................................................................ 5 Types of safety precautions:.......................................... 5 Safety precautions:....................................................
User s Manual Bluetooth Calculator Keypad Page Regulatory Compliance This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause
POLAR RC3 GPS User Manual CONTENTS 1. INTRODUCTION... 4 2. THE ALL-IN-ONE TRAINING SYSTEM... Training Computer Parts... Training Software... Available Accessories... Button Functions... Menu Structure...
FR70 quick start manual January 2013 190-01373-01_0B Printed in Taiwan Warning: Always consult your physician before you begin or modify any exercise program. See the Important Safety and Product Information
Users Manual & Limited Warranty iosafe Solo External Hard Drive USB 2.0 Fireproof Waterproof FloSafe Cooling Technology Data Recovery Service 910-10841-00 REV 7.1 2 COPYRIGHTS Copyright iosafe, Inc. 2009.
HANDS-FREE BLUETOOTH CONTROLLER for SMART READY TABLETS AND COMPUTERS Operating Manual 2 CONTENTS Before Turning on Your PED... 4 Power... 5 ON... 5 OFF... 5 Modes... 6 Changing the MODE... 7 Connecting
owner s manual F O R E R U N N E R 1 1 0 GPS-ENABLED SPORT WATCH 2010 2013 Garmin Ltd. or its subsidiaries Garmin International, Inc. 1200 East 151st Street, Olathe, Kansas 66062, USA Tel. (913) 397.8200
quick start manual F O R E R U N N E R 3 1 0 X T MULTISPORT GPS TRAINING DEVICE Warning: Always consult your physician before you begin or modify any exercise program. See the Important Safety and Product
Polar WearLink + Transmitter Nike+ User Manual A1 A2 B1 B2 B3 B4 C Polar WearLink + Transmitter Nike+ This user manual contains instructions for Polar WearLink+ transmitter Nike+. The transmitter is compatible
TomTom Runner & Multi-Sport Reference Guide 1.8 Contents Welcome 4 What's new 5 What's new in this release... 5 Getting started 6 Your watch 7 About your watch... 7 Wearing your watch... 7 Cleaning your
THE NEW GENERATION IN TECHNOLOGY NI-3103A Alarm Clock w/fm Radio ipod & iphone Docking Operating Instructions Table of Contents Important Safeguards... 3 Parts... 6 Controls... 6 To Set Up... 7 ipod/iphone
EN CUSTOMER SERVICE CONTACTS Global Help Desk +358 2 284 11 60 Suunto USA Phone +1 (800) 543-9124 Canada Phone +1 (800) 776-7770 Suunto website www.suunto.com COPYRIGHT This publication and its contents
HEART RATE MONITOR US/GB Zone Indicator KCAL PC 22.13 Woman / Man ENGLISH Contents 1 Button functions 3 2 Activating the PC 22.13 3 3 Display overview 4 4 Basic configuration of the PC 22.13 4 5 Training
1 BLUETOOTH KEYBOARD for Tablets 410-2153-001B / AKB33US 1 YEAR LIMITED WARRANTY: We pride ourselves on the quality of our products. For complete warranty details and a list of our worldwide offices, please
PERFORMANCE MONITOR USE concept2.com E F D ES I P DK NL SV FI ENGLISH....................... 3-6 FRANÇAIS...................... 7-10 DEUTSCH...................... 11-14 ESPAÑOL...................... 15-18
User s Manual for Tote-Remote Remote Control & Laser Pointer for Laptop Computers TABLE OF CONTENTS Important Safety & Health Information 2 Special Notice Regarding Carrying Laser Pointers On Commercial
INSTRUCTION MANUAL STRAPLESS HEART RATE MONITOR Model: HR-210 ENGLISH table TABLE of OF CONTENTS Before using the Monitor Introduction... 3 Important Safety Information...4 Operating the Device...4 Care
TomTom Runner & Multi-Sport Reference Guide 1.7 Contents Welcome 4 Getting started 5 Your watch 6 About your watch... 6 Wearing your watch... 6 Cleaning your watch... 7 The heart rate monitor... 7 Using
User Manual (English) Table of Contents General Safety Information...2 Fueltank UNO Components...3 Charging the Fueltank UNO...4 Using the Fueltank UNO...5 Power Saving Mode...6 Checking the Fueltank UNO
DO NOT FORMAT UNIT under FAT. 2GB MP3 Player USER GUIDE Jazwares, Inc. 2010 CONTENTS Please read the instructions along with the MP3 Player carefully before you use it, so that you can operate it conveniently.
Complete User Guide MIO Alpha User Guide 01 Table of Contents Welcome 03 Getting Started 04 Your MIO Alpha 04 Icons 04 Activating Your Alpha Using Alpha 05 Wearing Your Alpha 05 Getting Your Heart Rate
Polar RS200 User Manual WRIST UNIT BUTTONS Note: Pressing a button briefly has a different effect than pressing and holding the button for a longer period of time: Normal press: press and release the button.
Polar RCX3 user manual CONTENTS 1. INTRODUCTION... 4 2. THE COMPLETE TRAINING SYSTEM... Training Computer Parts... Training Software... Available Accessories... 5 5 5 6 3. GETTING STARTED... 7 Basic Settings...
Targus Wireless RF Mouse Visit our Web site at: www.targus.com Features and specifications are subject to change without notice. 2004 Targus Group International and Targus, Inc.. 400-0111-001B USER S GUIDE
Phoenix Body Fat Scale Manual Low Batteries & bad battery connections are the #1 cause of scale malfunction and inaccuracy! We test all of our scale returns from consumers. Fully 60% of consumer returns
quick start manual F O R E R U N N E R 4 0 5 GPS-ENABLED SPORTS WATCH WITH WIRELESS SYNC Warning: This product contains a non-replaceable lithium-ion battery. See the Important Safety and Product Information
Instruction Manual Table of Contents 01 02 02 03 04 Included in the Box General Controls Playback Features Care Charging 05 06 07 08 09 10 10 10 Uploading Songs Supported Audio Files Manual Drag and Drop
Quick Installation Guide TK-209K TK-409K Table of of Contents Contents English... 1. Before You Start... 2. How to Connect... 3. Operation... 1 1 2 4 Troubleshooting... 5 Version 09.07.2006 1. Before You
Forerunner 225 Owner s Manual May 2015 Printed in Taiwan 190-01887-00_0A All rights reserved. Under the copyright laws, this manual may not be copied, in whole or in part, without the written consent of
TRF-ZW1 Z-Wave Extender Owner s Manual TRF-ZW1 Z-Wave Extender Owner's Manual 2013 Universal Remote Control, Inc. The information in this Owner s Manual is copyright protected. No part of this manual may
COMPLETE HR Displays your heart rate as bpm and % of HR max, average heart rate and exercise duration. Allows you to set 5 exercise sets for interval training with HR target zones and recovery calculation.
EN CUSTOMER SERVICE CONTACTS Global Help Desk +358 2 284 11 60 Suunto USA Phone +1 (800) 543-9124 Canada Phone +1 (800) 776-7770 Suunto website www.suunto.com COPYRIGHT This publication and its contents
PROFESSIONAL SERIES Owner s Guide For Models: ca6554 Deluxe Vehicle Security and Remote Start System with 2 Way Confirming LCD Remote Control IMPORTANT NOTE: The operation of the Security and Convenience
User s guide «FCC» DECLARATION OF CONFORMITY FCC rules - PART 15 NUM AXES declares that the training collar DOGTEK CANICOM 200 complies to all dispositions of the part 15 of the FCC rules This device complies
EN DIGITAL wireless DIGITAL wireless DIGITAL wireless count log SPORT ready BIKE COMPUTER 5.o Contents ROX 5.0 Contents 1 Functions and packaging contents... 7 1.1 Foreword... 7 1.2 Packaging contents...
PROFESSIONAL SERIES CA 1050 Owner s Guide Vehicle Security and Keyless Entry System IMPORTANT NOTE: The operation of the Security and Convenience System as described in this manual is applicable to most
Vibration Alarm won't disturb others. Beep Alarm option VIBRATION WATCH with: Auto Reload Countdown Timer can be set for seconds, minutes & hours. Use for reminders such as medical conditions, medication,
Always here to help you Register your product and get support at www.philips.com/welcome Question? Contact Philips Wake-up Light HF3510 User manual Manuel d utilisation IMPORTANT SAFETY INSTRUCTIONS WARNING
PIR-1 Owner s Manual PIR-1 Owner s Manual 2010 Universal Remote Control, Inc. The information in this manual is copyright protected. No part of this manual may be copied or reproduced in any form without
User Guide for the Kidde RemoteLync Remote Notification Device 120V AC 3 Color LED Indicator Voice Message System For questions concerning your device, please call our Product Support Line at 1-800-880-6788.
Safety Instructions 1. Keep the radio away from heat sources. 2. Do not use the radio near water. 3. Avoid objects or liquids getting into the radio. 4. Do not remove screws from or open the radio casing.
QUICK INSTALLATION GUIDE VEBAR Battman Monitoring Software For Microsoft operating systems XP, VISTA, WINDOWS 7 For Linux OS install, please contact customer service and refer to document: VEBAR Software
User s guide DECLARATION OF CONFORMITY DOGTEK Declares that the bark control collar NoBark Spray complies with all FCC regulations and complies with the standards below EN 61000-6-1 (2007) et EN 61000-6-3
Wireless Internet Keyboard and Laser Mouse User s Manual Model KB1045LSR FCC STATEMENT KB1045LSR This device complies with part 15 of FCC Rules. Operation is subject to the following two conditions: (1)
2 TM 2 TM Users Manual SEC100, SEC200 USB Media Alert Version 5.0 10/7/2014 Thank you for purchasing the Sonic-connect USB Media Alert Device, your companion to help you stay connected with today s specialized
quick start manual F O R E R U N N E R 4 1 0 GPS-ENABLED SPORTS WATCH WITH WIRELESS SYNC Warning This product contains a nonreplaceable lithium-ion battery. Always consult your physician before you begin
User Guide Microsoft Screen Sharing for Lumia Phones (HD-10) Issue 1.1 EN-US User Guide Microsoft Screen Sharing for Lumia Phones (HD-10) Contents Safety 3 About your accessory 4 Keys and parts 5 Connect
A. FEDERAL COMMUNICATIONS COMMISSION (FCC) STATEMENT This equipment has been tested and found to comply with the limits for a Class B digital device, Pursuant to Part 15 the FCC rules. These limits are
Wireless Optical Stow-N-Go TM Notebook Mouse USER GUIDE Visit our Website at www.targus.com Features and specifications subject to change without notice. 2008 Targus Group International, Inc. and Targus,
Dual-Bay RAID Storage Enclosure for two 3.5-inch Serial ATA Hard Drives User Manual March 31, 2014 v1.2 www.akitio.com EN Table of Contents Table of Contents 1 Introduction... 1 1.1 Technical Specifications...
Alarm Clock USER GUIDE Jazwares, Inc. 2012 CONTENTS Please read the instructions along with the Alarm Clock carefully before you use it, so that you can operate it conveniently. WELCOME & Warnings Page
Verbatim PowerBay Single USB and esata External Hard Drive Version 1.00 User Manual Table of Contents Introduction... 2 Controls, Connectors and Indicators... 2 About the Hard Drive... 2 Locating the Drive
Keep it Simple Timing Support... 1 Introduction... 2 Turn On and Go... 3 Start Clock for Orienteering... 3 Pre Start Clock for Orienteering... 3 Real Time / Finish Clock... 3 Timer Clock... 4 Configuring
Pub. 988-0064-351 LST-3800 In-Dash Digital Sonar Gauge Installation & Operation Instructions The LST-3800 is a depth and temperature gauge that comes with a 200 khz transducer, features deep and shallow
USB 2.0 SIM/Micro SD & T-Flash Card Reader Model #: CR6300 User s Manual PID # 201137-109268 Rev. 090120 All brand name and trademarks are the property of their respective owners USER S RECORD: To provide
Your consent to our cookies if you continue to use this website.