epros DrainLiner Program

Size: px

Start display at page:

Download "epros DrainLiner Program"

Jennifer Reeves
8 years ago
Views:

1 epros DrainLiner Program All Liner Types At A Glance

3 epros DrainLinerPP (mit PP-Beschichtung) 3 In trenchless rehabilitation methodology, a general distinction is made between sectional or part repairs by means of patch or short liners and complete (full-length) renovation of sewer and pipe runs using cured-in-place pipe lining (CIPP) techniques. The renovation of non-man-entry sewer lines with full-length CIPP liners has established itself as a sophisticated economical and technical alternative to traditional repair techniques involving digging up the ground. This method has become a proven and reasonable-cost solution for the basic renovation of service lines in need of repair by extending their service lives for another life cycle of at least 50 years. It is imperative that materials used in CIPP operations are suitable for this type of application and that the installation process meets stringent quality criteria. Trelleborg Pipe Seals Duisburg provide all liners for the rehabilitation and repair of main lines, lateral pipes, vertical pipes and diverse pipe lines with or without bends. Various product lines geared to the particular needs are available: epros DrainFlexLiner epros DrainSteamLiner epros DrainPlusLiner (TPU) with PP coating/installation aid with integrated PP coating with TPU film/installation aid All epros DrainLiners are approved by Deutsches Institut für Bautechnik (DIBt) In connection with the use of certain epoxy resin systems, the following General Technical Approvals apply: Pipe size Resin system DIBt Approval No. DN 50 - DN 200 epros EPROPOX HC60/120 Z (Inhouse Pipelines) DN DN 250 epros EPROPOX FC15/FC30 Z DN DN 400 epros EPROPOX HC60 Z DN DN 600 epros EPROPOX HC120 Z DN DN 1000 epros EPROPOX HC2640 Z For the installation technique and specifications according to the German Institute for Construction Enginnering (DIBt) please refer to the latest Method Statement manual.

The renovation of non-man-entry sewer lines with full-length CIPP liners has established itself as a sophisticated economical and technical alternative to traditional repair techniques involving

4 epros DrainFlexLiner max. 120 C World first The most flexible PP liner of all time. Benefits Much better than conventional PP liners due to maximal elasticity of the coating steam resistant easy to handle easy to install extremely user-friendly wetting characteristics dimensional stability during inversion excellent price-performance ratio * greater pipe sizes and wall thicknesses available on request Applications e p r o s DrainFlexLiner for pipe lines and sewers having diameters from DN 100 to DN 600 *. For installations according to DIBt specifications use the nominal pipe sizes given therein. Use for lines with bends up to 45 - without changes in nominal size. Suitable for being installed in circular, egg-shaped and special sections. Suitable for steam curing due to high temperature resistant polypropylene coating. Specifications Material Polyester needle-fleece tube (PES tube) with a polypropylene coating (PP). The coating (approx. 300 µm) is deemed an installation aid. The special formulation gives the new PP liner its extraordinary elasticity (DN DN 600). This particular flexibility is also true for smaller diameters (DN DN 200) due to a special PP-based coating used for this specific purpose only. Undersize; 10% Wall thickness Wall thicknesses between 3 and 21 mm can be selected, depending on the results of the design calculations. Suitable resins The epros DrainFlexLiner can be used with epoxy, silicate or polyester resin systems. Curing method Ambient cure Hot water Steam cure

stability during inversion excellent price-performance ratio * greater pipe sizes and wall thicknesses available on request Applications e p r o s DrainFlexLiner for pipe lines and sewers having

5 epros DrainSteamLiner 5 max. 120 C Benefits Robust CIPP liner for heavier-duty applications. Guaranteed waterproof by its integrated coating. No cutting in APS leakage tests Very good hydraulic characteristics. Applications e p r o s DrainSteamLiner for pipe lines and sewers having diameters from DN 150 to DN 600 *. For installation acc. to DIBt specifications use the nominal pipe sizes given therein. Use for lines with bends up to 45 - without changes in nominal size. Suitable for being installed in circular, egg-shaped and special sections. Specially recommended for steam cure. * greater pipe sizes and wall thicknesses available on request Specifications Material Polyester needle-fleece tube (PES tube) with a polypropylene (PP) coating, but as an integral part of the liner in the case of the epros DrainSteamLiner (approx. 600 µm). Undersize; 10 % Wall thickness Wall thicknesses between 3 and 21 mm can be selected, depending on the results of the design calculations. Suitable resins Epoxy, silicate and polyester resin systems can be used. Curing method Ambient cure Hot water Steam cure

to DIBt specifications use the nominal pipe sizes given therein. Use for lines with bends up to 45 - without changes in nominal size.

6 epros DrainPlusLiner (TPU) max. 100 C World first The new steam-resistant DrainPlusLiner (TPU) without calibration hose and with guaranteed wall thickness. Benefits Extremely flexible liner type, negotiates bends easily Allows for bends up to 90 Allows for up to 2 changes in diameter (DN 70 or higher). Minimal wrinkling Easy to handle even in case of low ambient temperatures Applications e p r o s DrainPlusLiner (TPU) for pipe runs including house connections with diameters from DN 50 to DN 250. The General Technical Approvals by DIBt apply to pipe sizes from DN 50 to DN 250. For lines with up to two changes in diameter. For lines with bends up to 90. Suitable for being installed in circular, egg-shaped and special sections. Properties Material Polyester needle-fleece tube (PES tube) with a polyurethane film coating (TPU). The coating (approx. 180 µm) is deemed an installation aid. Undersize; 10% Wall thickness DN 70 - DN 250: Uniform thickness of 4.5 mm - 3 mm guaranteed in overexpansion area. DN 50 - DN 70: Thickness of 3 mm - 2 mm guaranteed in overexpansion area. Suitable resins The epros DrainPlusLiner can be used with silicate resins, recommended are epoxy resin systems, preferably epros EPROPOX variants. Curing method Ambient cure Hot-water and steam cure without need of calibration hose.

Minimal wrinkling Easy to handle even in case of low ambient temperatures Applications e p r o s DrainPlusLiner (TPU) for pipe runs including house connections with diameters from DN 50 to DN 250.

7 epros DrainPreLiner Ideal for protecting resins from infiltration. 7 The preliner is a thin but resistant protective PE film tube (approx. 200 μm). It is pulled or inverted into the host pipe prior to liner installation in order to form a barrier between the pipe wall and the liner to prevent the resin from direct contact with the host pipe, or avoid damage to the liner. Applications (examples) Always use a pre liner in groundwater-saturated zones, where infiltration is present (groundwaterinfiltration). For rehabilitation of displaced joints where water accumulations before liner installation cannot be avoided. Absolutely necessary if using the rapid ambient curing epoxy resin systems epros EPROPOX FC15 or FC30. Available sizes: DN 100 to DN 1000

pipe, or avoid damage to the liner. Applications (examples) Always use a pre liner in groundwater-saturated zones, where infiltration is present (groundwaterinfiltration).

8 Calibration Hoses The epros DrainLiner open-end method includes a calibration hose to be inverted during liner inversion, either in an additional step or simultaneously with the liner. Optionally, an epros LinerEndCap can be used instead of the calibration hose. The end cap is glued to the end of the liner tube and removed after final cure. Both methods are intended to support and expand the liner, which is loose in the line due to the open end, and to hold it expanded until the end of the curing process. epros DrainCali Type Light Duty (DN 65 DN 200) epros DrainCali Type Heavy Duty (DN 100 DN 300) epros DrainCali Type Heavy Weight (DN 350 DN 600) epros LinerEndCap I (silicone) epros LinerEndCap II (PVC)

Both methods are intended to support and expand the liner, which is loose in the line due to the open end, and to hold it expanded until the end of the curing process.

9 epros DrainCali 9 Light Duty Calibration hose preferred for ambient curing resins Mainly used for house connection pipes Negotiates bends easily Welded Sizes: DN 65 to DN 200 max. 45 C Heavy Duty Calibration hose for hot curing resins Used in main sewers and for house connections Negotiates bends up to 90 Sewn Sizes: DN 100 to DN 300 max. 80 C water max. 100 C steam Heavy Weight Calibration hose for hot curing resins Mainly used in main sewers Negotiates bends up to 45 Sewn and welded Robust heavyweight design Sizes: DN 350 to DN 600 max. 80 C water

45 C Heavy Duty Calibration hose for hot curing resins Used in main sewers and for house connections Negotiates bends up to 90 Sewn Sizes:

10 epros LinerEndCaps epros LinerEndCap I For Inliner with TPU coating, e.g. epros DrainPlusLiner (TPU) Material: Glue: Silicone 1-component liquid silicon (ambient curing) epros LinerEndCap II For Inliner with PP coating, e.g. epros DrainFlexLiner, epros DrainSteamLiner Material: Glue: PVC two-pack adhesive

silicon (ambient curing) epros LinerEndCap II For Inliner with PP coating, e.

11 epros Notes DrainLinerPP (mit PP-Beschichtung) 11

12 Version Änderungen und Ergänzungen vorbehalten. Trelleborg Pipe Seals Milford Inc 250 Elm Street Milford New Hampshire USA Tel: Fax: Trelleborg Pipe Seals Duisburg GmbH Dr. Alfred-Herrhausen-Allee Duisburg Germany Tel: Fax:

+1 800 626 2180 Fax: +1 603 673 7271 Trelleborg Pipe Seals Duisburg GmbH Dr.

Rainwater going astray. EPROPOX FC30 epoxy resin system to be prepared for a rainy day

Rainwater going astray. EPROPOX FC30 epoxy resin system to be prepared for a rainy day Rainwater going astray EPROPOX FC30 epoxy resin system to be prepared for a rainy day Inversion 7 metres up into the vertical pipe with the epros Drum type Mini 3 Moisture damage in the Savings Bank Branch